Price stgy Prog

MLFB Description Catalog L-Price in Euro L-Price in RMB (incl.VAT)6AG40110CA110XX0SIMATIC RACK PC IL 40 S,PENTIUM 4 2,4 GHZ;EIDE 80GB HDD; INTERN;256MBYTE DDR SDRAM;1,44 MBYTE FDD + CD-ROM;SIMATIC RACK PC IL 40S,PENTIUM 4 2.4 GHZ;EIDE 80 GB HDD; INTERN.;256 MB DDR SDRAM;1.44 MBFDD + CD-ROM;IC201687.0026470.726AG40110CA121JX0SIMATIC RACK PC IL 40 S,PENTIUM 4 2,4 GHZ;EIDE 80 GB HDD; INTERN;256MB DDR SDRAM;1,44 MB FDD + DVD-ROM/CD-RW;SIMATIC RACK PC IL 40S,PENTIUM 4 2.4 GHZ;EIDE 80 GB HDD; INTERNAL;256 MB DDR SDRAM;1.44MB FDD + DVD-ROM/CD-RW;IC202277.0035728.416AG40110CA211JX0SIMATIC RACK PC IL 40 S,PENTIUM 4 2,4 GHZ;EIDE 80 GB HDD; INTERN;512MB DDR SDRAM;1,44 MB FDD + CD-ROM;SIMATIC RACK PC IL 40 S,PENTIUM4 2.4 GHZ;EIDE 80 GB HDD; INTERNAL;512 MB DDR SDRAM;1.44 MB FDD +CD-ROM;IC202297.0036042.236AG40110CA311XX0SIMATIC RACK PC IL 40 S,SCHNITTSTELLEN ONBOARD:1X LAN (RJ45); 1XGRAFIK(VGA);1X SERIELL (COM1);1X PARALLEL (LPT); 2X USB 2.0;SIMATICRACK PC IL 40 S,INTEGR. INTERFACES:1X LAN (RJ45);1X GRAPHIC (VGA);1XSERIAL (COM1);1X PARALLEL (LPT); 2X USB 2.0;IC202447.0038395.886AG40111CA110XX0SIMATIC RACK PC IL 40 S V2,PENTIUM 4 2,8 GHZ, HT;80 GB HDD EIDE,INTERN;256 MBYTE DDR SDRAM,(2 X 128 MB),DUAL CHANNEL;SIMATICRACK PC IL 40 S V2,PENTIUM 4 2.8 GHZ, HT;80 GB HDD EIDE; INTERN.;256MB DDR SDRAM,(2 X 128 MB), DUAL CHANNEL;IC201687.0026470.726AG40111CA121JX0SIMATIC RACK PC IL 40 S V2,PENTIUM 4 2,8 GHZ, HT;80 GB HDD EIDE,INTERN;256 MBYTE DDR SDRAM;(2 X 128 MB), DUAL CHANNEL;SIMATICRACK PC IL 40 S V2,PENTIUM 4 2.8 GHZ, HT;80 GB HDD EIDE; INTERN.;256MB DDR SDRAM,(2 X 128 MB), DUAL CHANNEL;IC202277.0035728.416AG40111CA211JX0SIMATIC RACK PC IL 40 S V2,PENTIUM 4 2,8 GHZ, HT;80 GB HDD EIDE ;INTERN;512 MBYTE DDR SDRAM;(2 X 256 MB), DUAL CHANNEL;SIMATICRACK PC IL 40 S V2,PENTIUM 4 2.8 GHZ, HT;80 GB HDD EIDE; INTERN.;512MB DDR SDRAM,(2 X 256 MB), DUAL CHANNEL;IC202297.0036042.236AG40112CA010XX0SIMATIC RACK PC IL 43,PENTIUM 4 531 (3,0 GHZ, HT);120 GB HDD SATA,INTERN;256 MBYTE DDR2 SDRAM;(1 X 256 MB), SINGLE CHANNEL;SIMATICRACK PC IL 43,PENTIUM 4 531 (3.0 GHZ, HT);120 GB HDD SATA, INTERN;256MBYTE DDR2 SDRAM;(1 X 256 MB), SINGLE CHANNEL;IC201577.0024744.716AG40112CA121JX0SIMATIC RACK PC IL 43,PENTIUM 4 531 (3,0 GHZ, HT);120 GB HDD SATA,INTERN;512 MBYTE DDR2 SDRAM;(2 X 256 MB), DUAL CHANNEL;SIMATICRACK PC IL 43,PENTIUM 4 531 (3,0 GHZ, HT);120 GB HDD SATA, INTERN;512MBYTE DDR2 SDRAM;(2 X 256 MB), DUAL CHANNEL;IC202147.0033688.586AG40112DA111JX0SIMATIC RACK PC IL 43,PENTIUM 4 551 (3,4 GHZ, HT);120 GB HDD SATA,INTERN;512 MBYTE DDR2 SDRAM;(2 X 256 MB), DUAL CHANNEL;SIMATICRACK PC IL 43,PENTIUM 4 551 (3.4 GHZ, HT);120 GB HDD SATA, INTERN;512MBYTE DDR2 SDRAM;(2 X 256 MB), DUAL CHANNEL;IC202257.0035414.596AG40400AE200AA0SIMATIC MICROBOX PC 420SCHNITTSTELLEN ON BOARD,2XLAN (RJ45);1XGRAFIK (DVI-I);1XSERIELL (COM1); 4XUSB 2.0BIS ZU 3 STECKPLAETZEPC/104-SIMATIC MICROBOX PC 420INTEGR. INTERFACES:2X LAN(RJ45);1XGRAPHICS(DVI-I);1X SERIAL (COM1); 4 X USB 2.0IC201559.0024462.276AG40700BA000XA0ERWEITERUNGSKIT PC/1046 ERWEITERUNGSRAHMENINKL.MONTAGEMATERIAL; ZURINTEGRATION VON PC104-MODULENIN DENSIMATIC MICROBOX PC 420EXPANSION KIT PC/1046 EXPANSION RACKSINCL.MOUNTING KIT; FORINTEGRATING PC104 MODULESIN THE SIMATICMICROBOX PC 420IC20149.002337.966AG40700EA000AA0STARTERPAKET MICROBOXMICROBOX UND MODUL650 MHZ, 256 MBRAM,40 GBYTE FESTPLATTE,PROFIBUS-SCHNITTSTELLE,STARTERPACKAGE MICROBOXMICROBOX AND MODULE650 MHZ, 256 MB RAM,40GBYTE HARDDISK,PROFIBUS INTERFACE,IC201599.0025089.916AV35911AD001AA0GERAETEHANDBUCH OP3,DEUTSCHOP3 MANUALGERMAN ST80.1Q50.00796.60 6AV35911AD001AB0GERAETEHANDBUCH OP3,ENGLISCHOP3 MANUALENGLISH ST80.1Q50.00796.606AV35911AD001AC0GERAETEHANDBUCH OP3,FRANZOESISCHOP3 MANUALFRENCH ST80.1Q50.00796.60 6AV35911AD001AD0GERAETEHANDBUCH OP3,ITALIENISCHOP3 MANUALITALIAN ST80.1Q50.00796.60 6AV35911AD001AE0GERAETEHANDBUCH OP3,SPANISCHOP3 MANUALSPANISH ST80.1Q50.00796.606AV36075BA000AK0OPERATOR PANEL OP7/DP6AV3607-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE AKUNDENAUSFUEHRUNGFA. HALOILA-OCTOPUSOPERATORPANEL OP7/PP6AV3607-1JC20-0AX1CUSTOMIZED DESIGN VERSIONACUSTOMER-SPECIFIC OPTION FORHALOILA-OCTOPUS ST8092512.0010140.236AV36075BB000AF0OPERATOR PANEL OP7/DP6AV3607-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE BKUNDENAUSFUEHRUNG FA. KSBOPERATOR PANELOP7/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERSIONBCUSTOMER-SPEC. DESIGN F. KSB ST8092616.0012199.966AV36075BB000AG0OPERATOR PANEL OP7/DP6AV3607-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE BKUNDENAUSFUEHRUNG FA. SAT-GMBHOPERATOR PANELOP7/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERSIONBCUSTOMER-SPEC. DESIGN SAT-GMBH ST8092518.008252.786AV36075BB000AH0OPERATOR PANEL OP7/DP6AV3607-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE BKUNDENAUSFUEHRUNG FA. INTERINGOPERATOR PANELOP7/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERSIONBCUSTOMER-SPEC. DESIGN INTERING ST8092518.0010259.066AV36075BC001AH0OPERATOR PANEL OP7/DP6AV3607-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE CKUNDENAUSFUEHRUNG FA. INTERINGOPERATOR PANELOP7/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERSIONCCUSTOMER-SPEC. DESIGN INTERING ST8092510.008125.326AV36075CB000AL0OPERATOR PANEL OP7/DP6AV3607-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE CKUNDENAUSFUEHRUNG FA. CFSOPERATOR PANELOP7/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN OPTIONCCUSTOMER-SPECIFIC VERS. FOR CFS ST8092413.006579.926AV36175BA000BC0OPERATOR PANEL OP17/DP6AV3617-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE AKUNDENAUSFUEHRUNG FA. KRAYEROPERATOR PANELOP17/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERSIONACUSTOMER-SPEC. DESIGN F. KRAYER ST80921,167.0023112.596AV36175BB000AJ0OPERATOR PANEL OP17/DP6AV3617-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE BKUNDENAUSFUEHRUNG FA. HARLANDOPERATOR PANELOP17/DP6AV3607-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERSIONBCUSTOMER-SPEC. DESIGN HARLAND ST80921,167.0023112.596AV36175BB000BD0OPERATOR PANEL OP17/DP6AV3617-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE BKUNDENAUSFUEHRUNG FA. MOELLERSOPERATOR PANELOP17/DP6AV3617-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERS.BCUSTOMER DESIGN FOR MOELLERS ST8092775.0012347.306AV36175BB000BE0OPERATOR PANEL OP17/DP6AV3617-1JC20-0AX1KUNDENSPEZ. DESIGNVARIANTE BKUNDENAUSFUEHRUNGFA. GREIF-VELOXOPERATOR PANELOP17/DP6AV3617-1JC20-0AX1CUSTOMER-SPEC. DESIGN VERS.BCUSTOMER DESIGN F. GREIF-VELOX ST8092775.0012347.306AV36275BB000AE0OPERATOR PANEL OP27 STN FARBE6AV3627-1LK00-1AX0KUNDENSPEZ.DESIGN VARIANTE BKUNDENAUSFUEHRUNG FA. CFSOPERATOR PANELOP27 STN COLOR6AV3627-1LK00-1AX0CUSTOMER-SPEC. DESIGN VERSIONBCUSTOMER-SPEC. DESIGN F. CFS ST80921,455.0023181.066AV36476BC540AD0OEM-OP47, TOUCHSTANDARD-GEHAEUSEP133, TFT-COLOR, FD,HD,16MB,256KB CACHEMS-DOS ENGLISCHOEM-OP47, TOUCHSTANDARDHOUSINGP133, TFT-COLOR, FD,HD,16MB, 256KB CACHEMS-DOS ENGLISH ST80927,085.00140319.366AV36476CG220AF1OEM-OP47STANDARD-GEHAEUSE + KDSP.DESIGNP200, TFT-COLOUR,FD,HD, +32MBWINCC RT-MAX, WIN NT4.0OEM-OP47STANDARD HOUSING +CUSTOMER-SPECIFIC DESIGN, P200,COLOR TFTFD, HD, + 32 MB, WINCCRT-MAX,WIN NT4.0ST80928,871.00175691.336AV36718CB00EINSCHUBSTREIFEN FUERPUSH BUTTON PANEL PP17-I,MIT PROFISAFEKOMMUNIKATION(4 SATZ)LABELING STRIPS FORPUSH BUTTON PANELPP17-I,WITH PROFISAFE COMM.,(4 SETS)ST809230.00477.966AV36781CC10SERVICEPAKET F. OP7/17 UND TD17SERVICE PACK. F.OP7/17 AND TD17ST80.1Q35.70568.776AV36783XC30SERVICEPAKET FUERPP7, PP17 I, PP17 IISERVICE PACKAGE FORPP7, PP17I, PP17 II ST80.1Q35.70568.776AV36811AB060AX0SIMATIC PROAGENT FOR OPFUER OP27/37, TP27/37UND C7-626,PROZESSDIAGNOSERUNTIME-LIZENZ, V5.X, V6.X,PROZESSDIAGNOSE AUFBASIS VONSIMATIC PROAGENT FOR OPFOR OP27/37, TP27/37AND C7-626,PROCESS DIAGNOSTICSRUNTIME LICENSE, V5.X, V6.X,PROCESSDIAGNOSTICS BASED ON ST80.2F455.007553.626AV36811BB060AQ0EPL-ROYALTY FUERPROAGENT/PC(EPL = ENTERPRISE LICENCE)EPL-ROYALTY FORPROAGENT/PC(EPL = ENTERPRISE LICENCE)ST80.2F680.0011288.936AV36811BB060AX0SIMATIC PROAGENT/PCFUER PC-BASIERTE SYSTEMERUNTIME-LIZENZ,V5.X, V6.X,PROZESSDIAGNOSE AUF BASIS VONSTEP7, S7-GRAPH UND S7-PDIAGSIMATIC PROAGENT/PCFOR PC-BASED SYSTEMSRUNTIME LICENSE,V5.X, V6.X,PROCESS DIAGNOSTICS BASED ONSTEP7, S7-GRAPH AND S7-PDIAG ST80.2F680.0011288.936AV36811CB060AX0SIMATIC PROAGENT/MPFUER WINDOWS CE GERAETE(AUSSERTP/OP170)RUNTIME-LIZENZ, V6.X,PROZESSDIAGNOSE AUF BASISVONSIMATIC PROAGENT/MPFOR WINDOWS CE DEVICES(NOTTP/OP170)RUNTIME LICENSE, V6.X,PROCESS DIAGNOSTICS BASED ON ST80.2F455.007553.626AV36812AA000AX0SIMATIC THIN CLIENT/MP V1.0,3 LIZENZEN ZUR INSTALLATION AUF3GERAETE, SW UND DOKU AUF CDLICENSE KEY AUF FD,DOKUENGLISCH,SIMATIC THIN CLIENT/MP V1.0,3 LICENSES FOR INSTALLATIONON3 DEVICES, SW AND DOCUM. ON CDLICENSE KEY ON FD,ENGL.DOCUMENTATION ST80.2F153.002540.016AV36883AA030AX0PUSH BUTTON PANEL PP78 KURZHUBTASTEN,8 FLAECHEN LED'S,4 DE-KLEMMEN (24V)PROFIBUS DPPUSH BUTTON PANEL PP78 SHORT-STROKEKEYS8 SURFACE LED'S,4 DI TERMINALS (24 V)PROFIBUS DP ST80.1A560.008673.846AV36883CD130AX0PUSH BUTTON PANEL PP17 I16 KURZHUBTASTEN,16 FLAECHEN LED'S,16DE UND 16 DA-KLEMMENPROFIBUS DP12PUSH BUTTON PANEL PP17 I16SHORT-STROKE KEYS16 SURFACE LED'S,16 DI AND 16 DOTERMINALSPROFIBUS DP12ST80.1A1,000.0015489.006AV36883ED130AX0PUSH BUTTON PANEL PP17 II32 KURZHUBTASTEN,32 FLAECHEN LED'S,16DE UND 16 DA-KLEMMENPROFIBUS DP12PUSH BUTTON PANEL PP17 II32SHORT-STROKE KEYS32 SURFACE LED'S,16 DI AND 16 DOTERMINALSPROFIBUS DP12ST80.1A1,630.0025247.076AV39710NA030EA0SPEICHERMODUL FUER OP20, 256 KBMIT GRAPH 5/II-DIAGNOSEUNDSTANDARD B/OP WF721, WF723AMEMORY MODULE FOR OP20, 256KBW. GRAPH 5/II DIAGNOSTICS ANDSTANDARD B/OP WF721, WF723A AR10-ST8669.0010925.446AV39710PA050EA0SPEICHERMODUL FUER OP30-SMMIT GRACIS-ULBPROZESSBETRIEB,MELDESYSTEM UNDDRUCKERPROTOKOLLIERUNG256KB ANWENDERSPEICHERMEMORY MODULE FOR OP30-SMWITH GRACIS-ULB PROCESS OPERAT.MESSAGE SYSTEM AND PRINTERLOGGING, 256 KBUSER MEMORY AR10-ST8567.009259.686AV39801AA210AX0STANDARD-FB ZUR KOPPLUNGVON TD/OP ANSIMATIC S5 -90U BIS -155U3,52"DISKETTE (MS-DOS)STAND V3.32, EINZELLIZENZSTANDARD FB TOCONNECT TD/OPTO SIMATIC S5 -90U TO -155U3.5" DISK (MS-DOS),VERS.3.32, SINGLE LICENSE ST80.2G180.002988.246AV39911AE000AX0GERAETEHANDBUCH TD17MEHRSPRACHIG (D,E,F,I,S)TD17MANUALSEVERAL LANG. (GER,EN,FR,IT,SP)ST80.1Q50.00796.606AV39911AE051AA0GERAETEHANDBUCH OP7, OP17DEUTSCHOP7, OP17 MANUALGERMAN ST80.1Q50.00796.606AV39911AE051AB0GERAETEHANDBUCH OP7, OP17ENGLISCHOP7, OP17 MANUALENGLISH ST80.1Q50.00796.606AV39911AE051AC0GERAETEHANDBUCH OP7, OP17FRANZOESISCHOP7, OP17MANUALFRENCH ST80.1Q50.00796.606AV39911AE051AD0GERAETEHANDBUCH OP7, OP17ITALIENISCHOP7, OP17 MANUALITALIAN ST80.1Q50.00796.60 6AV39911AE051AE0GERAETEHANDBUCH OP7, OP17SPANISCHOP7, OP17 MANUALSPANISH ST80.1Q50.00796.606AV39911BC051AA0GERAETEHANDBUCH KOMMUNIKATIONFUER ANSCHLUSS DER TD/OP ANDIESTEUERUNG, AUSGABE V3.0DEUTSCHCOMMUNICATIONS USERGUIDEFOR CONNECT. TD/OP WITHCONTROL SYSTEM, EDITIONV3.0GERMAN ST80.2G70.001083.396AV39911BC051AB0GERAETEHANDBUCH KOMMUNIKATIONFUER ANSCHLUSS DER TD/OP ANDIESTEUERUNG, AUSGABE V3.0ENGLISCHCOMMUNICATIONS USERGUIDEFOR CONNECT. TD/OP WITHCONTROL SYSTEM, EDITIONV3.0ENGLISH ST80.2G70.001083.396AV39911BC051AC0GERAETEHANDBUCH KOMMUNIKATIONFUER ANSCHLUSS DER TD/OP ANDIESTEUERUNG, AUSGABE V3.0FRANZOESISCHCOMMUNICATIONS USERGUIDEFOR CONNECT. TD/OP WITHCONTROL SYSTEM, EDITIONV3.0FRENCH ST80.2G70.001083.396AV39911BC051AD0GERAETEHANDBUCH KOMMUNIKATIONFUER ANSCHLUSS DER TD/OP ANDIESTEUERUNG, AUSGABE V3.0ITALIENISCHCOMMUNICATIONS USERGUIDEFOR CONNECT. TD/OP WITHCONTROL SYSTEM, EDITIONV3.0ITALIAN ST80.2G70.001083.396AV39911BC051AE0GERAETEHANDBUCH KOMMUNIKATIONFUER ANSCHLUSS DER TD/OP ANDIESTEUERUNG, AUSGABE V3.0SPANISCHCOMMUNICATIONS USERGUIDEFOR CONNECT. TD/OP WITHCONTROL SYSTEM, EDITIONV3.0SPANISH ST80.2G70.001083.396AV39911CA000AA0GERAETEHANDBUCH PP7/PP17DEUTSCHPP7/PP17 MANUALGERMAN ST80.1Q50.00796.60 6AV39911CA000AB0GERAETEHANDBUCH PP7/PP17ENGLISCHPP7/PP17 MANUALENGLISH ST80.1Q50.00796.60 6AV39911CA000AC0GERAETEHANDBUCH PP7/PP17FRANZOESISCHPP7/PP17 MANUALFRENCH ST80.1Q50.00796.60 6AV39911CA000AD0GERAETEHANDBUCH PP7/PP17ITALIENISCHPP7/PP17 MANUALITALIAN ST80.1Q50.00796.60 6AV39911CA000AE0GERAETEHANDBUCH PP7/PP17SPANISCHPP7/PP17 MANUALSPANISH ST80.1Q50.00796.606AV39911CA001BA0INBETRIEBNAHMEANLEITUNGPP7/PP17DEUTSCHINSTALLATIONGUIDEPP7/PP17GERMAN ST80.1Q10.00159.326AV39911CA001BB0INBETRIEBNAHMEANLEITUNGPP7/PP17ENGLISCHINSTALLATIONGUIDEPP7/PP17ENGLISH ST80.1Q10.00159.326AV39911XB010AA0BETRIEBSANLEITUNGPUSH BUTTON PANEL PP17-I,MIT PROFISAFEKOMMUNIKATIONDEUTSCHOPERATING MANUALPUSH BUTTON PANELPP17-I,WITH PROFISAFE COMM.,GERMAN ST809284.001338.296AV39911XB010AB0BETRIEBSANLEITUNGPUSH BUTTON PANEL PP17-I,MIT PROFISAFEKOMMUNIKATIONENGLISCHOPERATING MANUALPUSH BUTTON PANELPP17-I,WITH PROFISAFE COMM.,ENGLISH ST809284.001338.296AV63711BD050AX0WINCC-POWERPACK F.VERSION V5.XRT - LIZENZOHNEVERSIONSWECHSELVON 128 AUF 256 POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME LICENSEW/O VERSION CONVERSIONFROM 128TO 256 POWER TAGS ST80.2U1,035.0017182.416AV63711BD060DX0WINCC-POWERPACK RT 128/256FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT128/256FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2U1,135.0018842.546AV63711BD062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 128 to256, STARTING WITH VERSION V6.2ST80.2U 1135.0018842.546AV63711BD150AX0WINCC-POWERPACK F.VERSION V5.XRT+CS - LIZENZOHNEVERSIONSWECHSELVON 128 AUF 256 POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME+CS LICENSEW/O VERSION CONVERSIONFROM128 TO 256 POWER TAGS ST80.2U2,125.0035277.896AV63711BD160DX0WINCC-POWERPACK RC 128/256FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC128/256FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2U2,230.0037021.036AV63711BD162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 128to 256, STARTING WITH VERSION V6.2ST80.2U 2230.0037021.036AV63711BE050AX0WINCC-POWERPACK F.VERSION V5.XRT - LIZENZOHNEVERSIONSWECHSELVON 128 AUF 1024 POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME LICENSEW/O VERSION CONVERSIONFROM 128TO 1024 POWER TAGS ST80.2V1,780.0029550.426AV63711BE060DX0WINCC-POWERPACK RT 128/1024FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT128/1024FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2V1,880.0031210.566AV63711BE062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 128to1024, STARTING WITH VERSION V6.2ST80.2V 1880.0031210.566AV63711BE150AX0WINCC-POWERPACK F.VERSION V5.XRT+CS - LIZENZOHNEVERSIONSWECHSELVON 128 AUF 1024 POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME+CS LICENSEW/O VERSION CONVERSIONFROM128 TO 1024 POWER TAGS ST80.2V3,675.0061010.006AV63711BE160DX0WINCC-POWERPACK RC 128/1024FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC128/1024FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2V3,780.0062753.146AV63711BE162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 128to1024, STARTING WITH VERSION V6.2ST80.2V 3780.0062753.146AV63711BF050AX0WINCC-POWERPACK F.VERSION V5.XRT - LIZENZOHNEVERSIONSWECHSELVON 128 AUF 64K POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME LICENSEW/O VERSION CONVERSIONFROM 128TO 64K POWER TAGS ST80.2X3,080.0051132.196AV63711BF060DX0WINCC-POWERPACK RT 128/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT128/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2X3,785.0062836.156AV63711BF062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 128 to65535, STARTING WITH VERSION V6.2ST80.2X3785.0062836.156AV63711BF150AX0WINCC-POWERPACK F.VERSION V5.XRT+CS - LIZENZOHNEVERSIONSWECHSELVON 128 AUF 64K POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME+CS LICENSEW/O VERSION CONVERSIONFROM128 TO 64K POWER TAGS ST80.2X6,125.00101683.336AV63711BF160DX0WINCC-POWERPACK RC 128/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC128/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2X6,820.00113221.286AV63711BF162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 128to 65535, STARTING WITH VERSION V6.2ST80.2X6820.00113221.286AV63711BG050AX0WINCC-POWERPACK F.VERSION V5.XRT - LIZENZOHNEVERSIONSWECHSELVON 256 AUF 1024 POWER TAGSWINCC-POWERPACKF.VERSION V5.XRUNTIME LICENSEW/O VERSION CONVERSIONFROM 256TO 1024 POWER TAGS ST80.2V745.0012368.016AV63711BG060DX0WINCC-POWERPACK RT 256/1024FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT256/1024FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2V745.0012368.016AV63711BG062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 256 to1024, STARTING WITH VERSION V6.2ST80.2V 745.0012368.016AV63711BG150AX0WINCC-POWERPACK F.VERSION V5.XRT+CS - LIZENZOHNEVERSIONSWECHSELVON 256 AUF 1024 POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME+CS LICENSEW/O VERSION CONVERSIONFROM256 TO 1024 POWER TAGS ST80.2V1,550.0025732.116AV63711BG160DX0WINCC-POWERPACK RC 256/1024FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC256/1024FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2V1,550.0025732.116AV63711BG162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 256to 1024, STARTING WITH VERSION V6.2ST80.2V 1550.0025732.116AV63711BH050AX0WINCC-POWERPACK F.VERSION V5.XRT - LIZENZOHNEVERSIONSWECHSELVON 256 AUF 64K POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME LICENSEW/O VERSION CONVERSIONFROM 256TO 64K POWER TAGS ST80.2X2,045.0033949.786AV63711BH060DX0WINCC-POWERPACK RT 256/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT256/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2X2,650.0043993.616AV63711BH062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 256 to65535, STARTING WITH VERSION V6.2ST80.2X2650.0043993.616AV63711BH150AX0WINCC-POWERPACK F.VERSION V5.XRT+CS - LIZENZOHNEVERSIONSWECHSELVON 256 AUF 64K POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME+CS LICENSEW/O VERSION CONVERSIONFROM256 TO 64K POWER TAGS ST80.2X4,000.0066405.446AV63711BH160DX0WINCC-POWERPACK RC 256/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC256/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2X4,590.0076200.256AV63711BH162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 256to 65535, STARTING WITH VERSION V6.2ST80.2X4590.0076200.256AV63711BJ050AX0WINCC-POWERPACK F.VERSION V5.XRT - LIZENZOHNEVERSIONSWECHSELVON 1024 AUF 64K POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME LICENSEW/O VERSION CONVERSIONFROM 1024TO 64K POWER TAGS ST80.2X1,300.0021581.776AV63711BJ060DX0WINCC-POWERPACK RT 1024/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT1024/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2X1,905.0031625.596AV63711BJ062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 1024to 65535, STARTING WITH VERSION V6.2ST80.2X1905.0031625.596AV63711BJ150AX0WINCC-POWERPACK F.VERSION V5.XRT+CS - LIZENZOHNEVERSIONSWECHSELVON 1024 AUF 64K POWER TAGSWINCC POWERPACKF.VERSION V5.XRUNTIME+CS LICENSEW/O VERSION CONVERSIONFROM10214 TO 64K POWER TAGS ST80.2X2,450.0040673.336AV63711BJ160DX0WINCC-POWERPACK RC 1024/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC1024/65536FUER SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2X3,040.0050468.146AV63711BJ162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from1024 to 65535, STARTING WITH VERSION V6.2ST80.2X3040.0050468.146AV63711BK060DX0WINCC-POWERPACK RT 128/8192FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT128/8192FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2W2,685.0044574.656AV63711BK062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 128 to8192, STARTING WITH VERSION V6.2ST80.2W 2685.0044574.656AV63711BK160DX0WINCC-POWERPACK RC 128/8192FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC128/8192FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2W5,430.0090145.396AV63711BK162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 128to 8192, STARTING WITH VERSION V6.2ST80.2W 5430.0090145.396AV63711BL060DX0WINCC-POWERPACK RT 256/8192FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT256/8192FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2W1,550.0025732.116AV63711BL062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 256 to8192, STARTING WITH VERSION V6.2ST80.2W 1550.0025732.116AV63711BL160DX0WINCC-POWERPACK RC 256/8192FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC256/8192FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2W3,200.0053124.356AV63711BL162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from 256to 8192, STARTING WITH VERSION V6.2ST80.2W 3200.0053124.356AV63711BM060DX0WINCC-POWERPACK RT 1024/8192FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT1024/8192FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2W805.0013364.106AV63711BM062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 1024to 8192, STARTING WITH VERSION V6.2ST80.2W 805.0013364.106AV63711BM160DX0WINCC-POWERPACK RC 1024/8192FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC1024/8192FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2W1,650.0027392.256AV63711BM162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from1024 to 8192, STARTING WITH VERSION V6.2ST80.2W 1650.0027392.256AV63711BN060DX0WINCC-POWERPACK RT 8192/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RT8192/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RTLICENSEW/O VERSION CONVERSION ST80.2X1,100.0018261.506AV63711BN062AX0SIMATIC WinCC V6.2 power tag upgrade license for runtime version(RT) from 8192to 65535, STARTING WITH VERSION V6.2ST80.2X1100.0018261.506AV63711BN160DX0WINCC-POWERPACK RC 8192/65536FUER SIMATIC WINCCAB VERSION V6.0SP3,RT+CS - LIZENZOHNE VERSIONSWECHSELWINCC POWERPACK RC8192/65536FOR SIMATIC WINCCSTARTING WITH VERSION V6.0 SP3,RT+CSLICENSEW/O VERSION CONVERSION ST80.2X1,390.0023075.896AV63711BN162AX0SIMATIC WinCC V6.2 power tag upgrade license for Complete(RC) version from8192 to 65535, STARTING WITH VERSION V6.2ST80.2X1390.0023075.896AV63711CA050AQ0EPL-ROYALTY FUERWINCC OPTION SERVER(EPL = ENTERPRISELICENSE)EPL-ROYALTY FORWINCC OPTION SERVER(EPL = ENTERPRISELICENSE)ST80.2Y2,935.0045425.006AV63711CA050AX0WINCC OPTIONSERVERBETRIEBFUER VERSION 5.0WINCC OPTIONSERVERMODEFOR VERSION 5.0ST80.2Y2,935.0045425.006AV63711CA060AQ0EPL ROYALTY FUER WINCC V6,OPTION SERVERBETRIEBNUR GUELTIG INVERBINDUNG MITENTERPRISE LICENSE-VERTRAG,SETZT EPL-MASTERVORAUSEPL ROYALTY FOR WINCC V6,OPTION SERVER OPERATIONONLYVALID COMBINED WITHENTERPRISE LICENSE CONTRACT,REQUIRES EPL-MASTER ST80.2Y2,935.0045425.006AV63711CA062AX0WINCC OPTION SERVER OPERATIION FOR SIMATIC WINCC STARTINGWITH VERSION V6.2 ,SINGLE LICENSE ST80.2Y2935.0031797.506AV63711CB050AQ0EPL-ROYALTY FUERWINCC OPTION USER ARCHIVES(EPL = ENTERPRISELICENSE)EPL-ROYALTY FORWINCC OPTION USER ARCHIVES(EPL =ENTERPRISE LICENSE)ST80.2Y725.0011220.836AV63711CB050AX0WINCC OPTIONANWENDERARCHIVEFUER VERSION 5.0WINCCOPTIONUSER ARCHIVESFOR VERSION 5.0ST80.2Y725.0011220.836AV63711CB060AQ0EPL ROYALTY FUER WINCC V6,OPTION USER ARCHIVES.NUR GUELTIG INVERBINDUNG MITENTERPRISE LICENSE-VERTRAG,SETZT EPL-MASTERVORAUSEPL ROYALTY FOR WINCC V6,OPTION USER ARCHIVES.ONLYVALID COMBINED WITHENTERPRISE LICENSE CONTRACT,REQUIRES EPL-MASTER ST80.2Y725.0011220.836AV63711CB062AX0WINCC OPTION USER ARCHIVES FOR SIMATIC WINCC STARTING WITHVERSION V6.2, SINGLE LICENSE ST80.2Y725.007854.586AV63711CC050BX0WINCC OPTIONOPEN DEVELOPMENT KIT (ODK)FUER C-PROGRAMMIERUNG, V5.0 SP1INKLUSIVE 1 TAG SUPPORTFUER WINCCV5.0+SP2WINCC OPTIONOPEN DEVELOPMENT KIT (ODK)FOR C-PROGRAMMING, V5.0 SP11 TAG SUPPORT INCLUDEDFOR WINCC V5.0+SP2ST80.2Y2,645.0040936.676AV63711CC060EX0WINCC OPTION ODK, V6.0 SP4 FOR WINCC V6.2ST80.2Y2645.0040936.676AV63711CC060EX4SIMATIC WINCC/ODK UPGRADEOPEN DEVELOPMENT KIT,UPGRADE V5.X ->V6.0 SP4,FUER C-PROGRAMMIERUNG,FUER SIMATIC WINCC AB V6.0SP4,SIMATIC WINCC/ODK UPGRADEOPEN DEVELOPMENT KIT,UPGRADEV5.X -> V6.0 SP4,FOR C PROGRAMMING,FOR SIMATIC WINCC ST80.2Y295.004565.726AV63711CD050AX0WINCC OPTIONKOMMUNIKATIONSKANALAPPLICOM KARTENV5.0WINCCOPTIONCOMMUNICATION CHANNELAPPLICOM CARDSV5.0ST80.2Y560.008667.126AV63711CD050BX0WINCC OPTIONKOMMUNIKATIONSKANALALLEN-BRADLEY DF1SERIELLV5.0WINCC OPTIONCOMMUNICATION CHANNELALLEN-BRADLEYDF1 SERIALV5.0ST80.2Y560.008667.126AV63711CD050CX0WINCC OPTIONKOMMUNIKATIONSKANALPROFIBUS-FMS, V5.0WINCCOPTIONCOMMUNICATION CHANNELPROFIBUS-FMS, V5.0ST80.2Y560.008667.126AV63711CD050DX0WINCC OPTIONKOMMUNIKATIONSKANALRTU/ASCII MODBUSSERIELL(MODICON), V5.0WINCC OPTIONCOMMUNICATIONCHANNELRTU/ASCII MODBUS SERIAL(MODICON), V5.0ST80.2Y560.008667.126AV63711CD050EX0WINCC OPTIONKOMMUNIKATIONSKANALGE FANUC UEBERSNP/SNPXV5.0WINCC OPTIONCOMMUNICATION CHANNELGE FANUC VIASNP/SNPXV5.0ST80.2Y560.008667.126AV63711CD050GX0WINCC OPTIONKOMMUNIKATIONSKANALALLEN-BRADLEY DH, DH+,DH485V5.0WINCC OPTIONCOMMUNICATION CHANNELALLEN-BRADLEY DH,DH+, DH485V5.0ST80.2Y560.008667.126AV63711CD050JX0WINCC OPTIONKOMMUNIKATIONSKANALMODBUS PROTOCOLSUITEV5.0WINCC OPTIONCOMMUNICATION CHANNELMODBUS PROTOCOLSUITEV5.0ST80.2Y560.008667.126AV63711CD050NX0WINCC OPTIONKOMMUNIKATIONSKANALS5-PMC-PROFIBUS (S5)V5.0WINCCOPTIONCOMMUNICATION CHANNELS5-PMC-PROFIBUS (S5)V5.0ST80.2Y1,465.0022673.816AV63711CD050PX0WINCC OPTIONKOMMUNIKATIONSKANALS5-PMC-INDUSTRIAL ETHERNET(S5)V5.0WINCC OPTIONCOMMUNICATION CHANNELS5-PMC-INDUSTRIALETHERNET (S5)V5.0ST80.2Y1,465.0022673.816AV63711CD050RX0WINCC OPTIONKOMMUNIKATIONSKANALMITSUBISHI-MELSEC-FXV5.0WINCC OPTIONCOMMUNICATION CHANNELMITSUBISHI-MELSEC-FXV5.0ST80.2Y560.008667.126AV63711CF050AQ0EPL-ROYALTY FUERWINCC OPTION REDUNDANCY(EPL = ENTERPRISELICENSE)EPL-ROYALTY FORWINCC OPTION REDUNDANCY(EPL =ENTERPRISE LICENSE)ST80.2Y3,050.0047204.856AV63711CF050AX0WINCC OPTIONREDUNDANZPAKETFUER VERSION V5.0WINCCOPTIONREDUNDANCY PACKAGEFOR VERSION 5.0ST80.2Y3,050.0047204.856AV63711CF060AQ0EPL ROYALTY FUER WINCC V6,OPTION REDUNDANCYNUR GUELTIG INVERBINDUNG MITENTERPRISE LICENSE-VERTRAG,SETZT EPL-MASTERVORAUSEPL ROYALTY FOR WINCC V6,OPTION REDUNDANCYONLY VALIDCOMBINED WITHENTERPRISE LICENSE CONTRACT,REQUIRES EPL-MASTER ST80.2Y3,050.0047204.856AV63711CF062AX0WINCC OPTION REDUNDANCY FOR SIMATIC WINCC STARTING WITHVERSION V6.2,SINGLE LICENSE ST80.2Y3050.0033043.406AV63711DG056AQ0EPL-ROYALTY FUERWINCC OPTION PROAGENT(EPL = ENTERPRISELICENSE)EPL-ROYALTY FORWINCC OPTION PROAGENT(EPL =ENTERPRISE LICENSE)ST80.2Y885.0013697.15。

Account #:_____________________________________Purchase Order #:________________________ Date:______________________Contact:__________________________ ATP/RTS:__________________________Mark For:_________________________________________________Carrot 3 Recommended ItemPrice Black Blue RedTether strap (Black)$93CCT3TS0-10CCT3TS0-10CCT3TS0-10Top Securement Strap*$55CCT3HSF-10CCT3HSF-10CCT3HSF-10Lower Securement Strap*$68CCT3LFS-10CCT3LFS-10CCT3LFS-10*For vehicles not equipped with anchor points.Trunk PositioningPrice BlackBlue RedBackrest Extension - 2" (Extends back height to 13.8")*$71CCT3BE2-10CCT3BE2-20CCT3BE2-30Backrest Extension - 4" (Extends back height to 15.8")*$95CCT3BE4-10CCT3BE4-20CCT3BE4-30Shoulder Protector Wings (Extends back height 6")$549CCT3SP0-10CCT3SP0-20CCT3SP0-30Firm Lateral Trunk Supports - Black^**$195CCT3LS0-10CCT3LS0-10CCT3LS0-10* The 2" & 4" Backrest Extensions cannot be used simultaneously.^ Width adjustment from 10" - 12", and 2" of height adjustment.**Manufacturer installation required.Pelvic Positioning Price Black BlueRedRodded Seat Extension [Large/Curved (extends seat depth 7")]^$217CCT3RSL-10CCT3RSL-20CCT3RSL-30Rodded Seat Extension [Small/90° (extends seat depth 2")]^$177CCT3RSS-10CCT3RSS-20CCT3RSS-30Seat Extension [2" (Extends seat depth to 12")]^*$98CCT3SE2-10CCT3SE2-20CCT3SE2-30Seat Extension [4" (Extends seat depth to 14")]^*˅$118CCT3SE4-10CCT3SE4-20CCT3SE4-30Seat Angle Adjustment Wedge (Height: 4.25" / Angle: 20°)$118CCT3SA0-10CCT3SA0-20CCT3SA0-30Pommel - Black* (Medial Thigh Separator)$124CCT3PM0-10CCT3PM0-10CCT3PM0-10Anti-Adduction/Knee Separator Pad $157CCT3AAK-00CCT3AAK-00CCT3AAK-00Pelvis Lock Harness (Small) (20.5" - 33.75")$260CCT3PLS-10CCT3PLS-10CCT3PLS-10Pelvis Lock Harness (Medium) (23" - 39.5")$260CCT3PLM-10CCT3PLM-10CCT3PLM-10Pelvis Lock Harness (Large) (25" - 46")$260CCT3PLL-10CCT3PLL-10CCT3PLL-10^Growth specifications with listed extensions:Seat depth: 9.8" - 22.3" / Backrest height: 11.8" - 22.8".*Rodded Seat Extension or Rodded Footrest required. 2" & 4" Seat Extensions cannot be used simultaneously when using Rodded Seat Extension.˅7" Rodded Seat Extenstion required.Foot & Leg PositioningPrice Black Blue RedRodded Footrest - Small [Gray (Adjusts from 10"-12")]*$335CCT3FRS-00CCT3FRS-00CCT3FRS-00Rodded Footrest - Medium [Gray (Adjusts from 12"-16")]*$335CCT3FRM-00CCT3FRM-00CCT3FRM-00Rodded Footrest - Large [Gray (Adjusts from 14"-18")]*$335CCT3FRL-00CCT3FRL-00CCT3FRL-00*Not available with Rodded Seat Extension.Small Support KitPrice Small Support Kit$480 Small Head Support: 7.25" x 8.5" (H x L)$0 Small Chest Support: Width 6.9"$0AccessoriesPrice Black Blue Red Upper Extremity Support (Tray) (crash tested)$180CCT3ST0-10CCT3ST0-20CCT3ST0-303D Body Balance Pads L/R Set $157CCT3BBP-00CCT3BBP-00CCT3BBP-00Air-Mesh Cushions/Pads Set$287CCT3AMC-10CCT3AMC-10CCT3AMC-10Anti-Escape Vest (Small) (Circum: 24.75" Height: 10.75")$167CCT3AVS-00CCT3AVS-00CCT3AVS-00Anti-Escape Vest (Medium) (Circum: 31.5" Height: 12")$167CCT3AVM-00CCT3AVM-00CCT3AVM-00Anti-Escape Vest (Large) (Circum: 37.5" Height: 13")$167CCT3AVL-00CCT3AVL-00CCT3AVL-00Removeable Incontinence Cover $209CCT3RIR-00CCT3RIR-00CCT3RIR-00Hinge Lock Belt$44CCT3HLB-00CCT3HLB-00CCT3HLB-00FAA Fixing Strap to Aircraft Seat $209CCT3FSA-00CCT3FSA-00CCT3FSA-00Booster Kit$1,200CCRT3BK-199CCRT3BK-299CCRT3BK-399Effective:4/28/2023OF0200-ENG-REV.07Convaid Carrot 3 Child Restraint SystemRetail Price List / Order FormStandard Domestic Shipping Rate: $40Prices in USD & subject to change, ex works Torrance, California.Retail Price List / Order Form Convaid Carrot 3 Child Restraint System CLIENT M EASUREMENTS:Carrot 3 Base Model Specifications:User Measurement Guide:Seat Width: 11.5" Minimum User Weight:30 lbs.Seat Depth Adjustment:9.8" - 11.3" Maximum User Weight:108 lbs.Backrest Height Adjustment:11.8" - 12.8" Minimum User Height:37"Head Support Height:8.5" Maximum User Height:60"Recline Adjustment:90 - 180° Recommended User Age:Ages 3-15Weight:19.1 lbs.Carrot 3 Specifications with Extensions:Seat Depth Adjustment:9.8" - 22.3"Backrest Height Adjustment:11.8" - 22.8"Shoulder Wing Height:6"Shoulder Wing Width Adjustment:15.25" - 19.25"Base Model Measurements: * ^Seat Depth: 9.8" - 11.3"Backrest Height: 11.8" - 12.8"Head Support Height:8.5"* Measurements do not include head support & growth extensions^ Base model includes 1.5" of seat depth growth (A) & 1" of backrest growth (B)Growth Extensions:Inches1a. Rodded seat extension - large7"1b. Rodded seat extension - small2"2.Seat extension - 4"4"3. Seat extension - 2"2"4.Backrest extension - 2" 2"5. Backrest extension - 4" 4"6. Shoulder protector wings6"Note: The same type of 2" & 4" extensions cannot be used simultaneously.。

VSC8584 Evaluation BoardUser GuideVPPD-03500Revision 1.0January 2014 Vitesse Proprietary and ConfidentialVitesseVitesse Semiconductor Corporation (“Vitesse”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Vitesse for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under the patent right of any manufacturer.Vitesse products are not intended for use in products or applications, including, butnot limited to, medical devices (including life support and implantable medical devices), nuclear products, or other safety-critical uses where failure of a Vitesse product could reasonably be expected to result in personal injury or death. Anyone using a Vitesse product in such an application without express written consent of an officer of Vitesse does so at their own risk, and agrees to fully indemnify Vitesse for any damages that may result from such use or sale.Safety of Laser Products, IEC 60825. While Vitesse products support IEC 60825, use of Vitesse products does not ensure compliance to IEC 60825. Buyers are responsible for ensuring compliance to IEC 60825. Buyers must fully indemnify Vitesse for any damages resulting from non-compliance to IEC 60825.Vitesse Semiconductor Corporation is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders.Copyright © 2014 Vitesse Semiconductor CorporationContentsRevision History (4)1Introduction (5)1.1References (6)2General Description (6)2.1Key Features (6)2.1.1Copper Port RJ45 Connections (6)2.1.2SGMII/QSGMII MAC SMA (6)2.1.3Switch Block Control (7)2.1.4Zarlink ZL30343 SyncE G.8262/SETS (7)2.1.5External 1588 Clock Option (7)2.1.6External RefClk Option (7)2.1.71588 Daisy-Chain SPI Time-Stamping Connection (8)2.1.8Network Interface Microcontroller Card (9)3Quick Start (9)3.1Connecting the Power Supply (9)3.2PC Software Installation (10)3.3Connecting the Board to the PC (10)3.3.1Changing the IP Address of the Board (10)3.4Using the Control Software (11)3.4.1Board Initialization and Running PHY Scripts (13)3.4.2Copper Media Operation (1000BASE-T) (15)3.4.3Fiber Media Operation (1000BASE-X) (16)3.4.4Fiber Media Operation (100BASE-FX) (16)3.5Useful Registers (16)3.5.1Ethernet Packet Generator (16)3.5.2Copper PHY Error Counters (17)3.5.3Fiber PHY Error Counters (17)3.5.4Configuring 1588 Daisy-Chain SPI Time-Stamping (17)4Additional Information (17)FiguresFigure 1.VSC8584EV Evaluation Board (5)Figure 2.SW1 Switch Control (7)Figure 3.1588 Daisy-Chain SPI Interconnect (8)Figure 4.1588 Daisy-Chain SPI Traffic Pattern (PHY port 3 egress) (9)Figure 5.GUI Connection Window (12)Figure 6.MII Registers GUI Window (13)Figure 7.Run PHY Script GUI Window (after script is loaded) (14)Figure 8.Run PHY Script GUI Window (after script is executed) (15)Revision HistoryRevision Date Description Rev 1.0January 15, 2014 First release1IntroductionThe VSC8584 device is a low-power, quad-port Gigabit Ethernet transceiver with fourSerDes interfaces for quad-port dual media capability. It also includes an integratedquad port I2C multiplexer (MUX) to control SFPs or PoE modules. The VSC8584supports IEEE 802.1AE 128/256-bit MACsec protocols to meet the securityrequirements for protecting data traversing Ethernet LANs, and also includes Vitesse’spatent-pending distributed timing technology VeriTime™ that delivers the industry’smost accurate IEEE 1588v2 timing implementation. The VSC8584 device offers aseamless integration between IEEE 1588v2 and the MACsec engine with no loss ofprecision. The VSC8584 also supports a ring resiliency feature that allows a1000BASE-T connected PHY port to switch between master and slave timing withouthaving to interrupt the 1000BASE-T link.This document describes the architecture and usage of the VSC8584 Evaluation Board(VSC8584EV). The VSC8584EV may be used to evaluate a family of devices whichinclude VSC8584. These devices vary with respect to the number of ports, supportedinterfaces, and available features. This document specifically addresses the VSC8584device. The Quick Start section describes how to bring-up the evaluation board alongwith install and run the graphical user interface (GUI), used to control the evaluationboard.Figure 1.VSC8584EV Evaluation Board1.1ReferencesThe following reference documents provide additional information about the operationof the VSC8584 evaluation board.•VSC8564 Datasheet( https:///products/product.php?number=VSC8564 )•VSC8582 Datasheet( https:///products/product.php?number=VSC8582 )•VSC8575 Datasheet( https:///products/product.php?number=VSC8575 )•VSC8584 Datasheet( https:///products/product.php?number=VSC8584 )•IEEE1588v2 and SyncE – Applications and Operation Using Vitesse’sSynchronization Solution( /products/download.php?fid=4767&number=VSC8574 ) •VSC8584 GUI( https:///products/product.php?number=VSC8584 )2General DescriptionThe evaluation board in Figure 1 provides the user a way to evaluate the VSC8584device in multiple configurations. Four RJ-45 connectors are provided for coppermedia interfaces. The four SFP cages allow for evaluation of the fiber mediainterconnects. The MAC interface is provided via SMA connectors.For access to all of the features of the device, an external microcontroller is used toconfigure the on-board clock chip via a two wire serial bus and the VSC8584 via theMDIO bus. The graphical user interface (GUI) enables the user to access the registers.The evaluation board uses a Zarlink device to synthesize a 125MHz reference clocksignal from a 20MHz crystal which serves as the REFCLK input.2.1Key Features2.1.1Copper Port RJ45 ConnectionsPHY Ports 2 and 3 use UDE RTA 1648BAK1A with integrated magnetic while PHYPorts 0 and 1 use generic RJ45 connectors with discrete Pulse H5008 magnetics.2.1.2SGMII/QSGMII MAC SMASGMII SMA connections are provided for all PHYs while the QSGMII SMA connection isavailable only on PHY0.2.1.3Switch Block ControlSet the SW1 switch as shown in the figure below.Figure 2.SW1 Switch Control2.1.4Zarlink ZL30343 SyncE G.8262/SETSThe Zarlink ZL30343 is initialized by default to provide a 125MHz differential LVPECLclock to VSC8584 REFCLK inputs. (Note: the ZL30343 can be programmed to provideLVDS differential clock in conjunction with an LVDS termination provided for REFCLK,please refer to the Zarlink manual for programming its output drive.)Also, the ZL30343 can support synchronization with the VSC8584 PHY recovered clockfor SyncE operation. The ZL30343 is initialized to lock to a recovered clock output ifone is enabled and available from the VSC8584 PHY. If no recovered clock signal isavailable, then the ZL30343 will select the crystal oscillator (U16) as default referencesource for holdover operation. ZL30343 will indicate locked versus holdover status bydriving LED D33 or D34. See the Zarlink documentation for more discussionconcerning its operation. See the VSC8584 datasheet for configuring recovered clockoutput pin behavior.Please ensure three-way resistive connections R19 and R22 are appropriatelyconnected to feedback the VSC8584’s recovered clock outputs into the ZL30343device, if synchronization to a recovered clock source is desired.2.1.5External 1588 Clock OptionThe user may choose to provide an external 1588 REFCLK via SMA connections to J65and J66. Zero Ohm jumpers may need to be removed and or installed to connect viathese clock inputs. The board is built with connections for external 1588 REFCLK,unless otherwise indicated in documentation accompanying the specific boarddelivered.2.1.6External RefClk OptionThe user may choose to provide an external PHY REFCLK via SMA connections to J21and J23. Zero Ohm jumpers may need to be removed and or installed to connect viathese clock inputs. As per section 2.1.4 and unless otherwise indicated indocumentation accompanying the specific board, the board is built with a REFCLKconnection driven by the ZL30343, instead of using an external REFCLK source.2.1.71588 Daisy-Chain SPI Time-Stamping ConnectionThe VSC8584 device enables daisy-chaining multiple devices to reduce the number ofpins required to transmit time stamping information to system ASICs gathering IEEE1588 time stamps. For users with two or more 8584EV boards, the following single-ended connections shown below are required from the master device to slave device: •J75 pin 6 to J77 pin 6 (1588_SPI_CLK output → input)•J75 pin 4 to J77 pin 4 (1588_SPI_CS output → input)•J75 pin 2 to J77 pin 2 (1588_SPI_MISO output → 1588_SPI_MOSI input) See section 3.5.4 for register programming to enable this interface.Recommendation: for SPI daisy chaining use a Molex 10 pin ribbon cable with one-to-one connections.Figure 3.1588 Daisy-Chain SPI InterconnectOnce enabled along with proper initialization of the 1588 IP block, time-stamped 1588traffic in the egress direction will generate a similar sequence on the serializedtimestamp daisy-chain as shown in Figure 4. See the VSC8584 datasheet sectionabout Serial Time Stamp Output Interface for a more detailed functional description.Figure 4.1588 Daisy-Chain SPI Traffic Pattern (PHY port 3 egress)PHYADD= 32.1.8Network Interface Microcontroller CardA “Rabbit” microcontroller card is included to facilitate a software interface to theregisters on the VSC8584. The controller card has a hard coded static IP address.Refer to the label on the card for the value. This address is required by the user toinitiate communications via the board and the GUI.NOTE: The factory programmed Rabbit board IP address is: 10.9.70.193.3Quick Start3.1Connecting the Power SupplyThe evaluation board uses +5VDC to power the on-board regulators creating the+3.3V, +2.5V, and +1.0V rails which drive the devices as well as modules. Theevaluation board can be powered up using the power pack which provides the +5VDC.Simply plug the AC adaptor into a wall socket and the barrel end into J67 (see theupper right corner of Figure 1). Immediately the user should see several LEDs turnon.The user may alternately connect the board to a bench style power supply byconnecting the red banana plug to +5VDC and the black banana plug to ground. Ifthe supply provides 3A the board should come alive as described above.3.2PC Software Installation1.Download the ZIP file to the PC’s root directory, normally C:\.2.Extract to C:\3.Double click the icon to launch the GUI (It is acceptable to drag the icon tothe desktop)3.3Connecting the Board to the PCThe Rabbit board can interface with a PC either through a direct connection to the PC orif configured properly through a local area network. The latter option requires the userto configure the Rabbit’s IP address so as to properly reside on the user’s network.The IP address of the board should be written on the Rabbit network interfacedaughter board card. The default value should be 10.9.70.193. You will need to usethis IP address to initially access the board for operation or to change its IP address.3.3.1Changing the IP Address of the Board1.Determine and write down the new unique IP address you wish to change theboard to.2.Directly connect an Ethernet cable from a PC to the Rabbit board.NOTE: Some older PCs do not support auto-crossover on the Ethernet connectionso a cross-over cable may be needed.unch a DOS command window by clicking on the Start->Run button and typing“cmd”.4.Within the DOS command window type “Telnet”.5.In Telnet, connect to the Rabbit board’s address using the open command bytyping “open^10.9.70.XXX”.6.10.9.70.xxx where xxx is the value on your board from the factory (typically 193).7.You should have a prompt and be able to type help to get a list of commandsavailable on the Rabbit.a)If you are unable to connect, then most likely you will need to change the IPaddress of the connected PC to have the first 3 octets similar to the board byfollowing the subsequent steps.b)On the PC under Windows -> Control Panel ->Network Connections -> LocalArea Connection, right mouse click for Properties. Under the General tabhighlight Internet Protocol (TCP/IP) and click on Properties. From there enterthe new PC IP address such as 10.9.70.yyy where yyy is a unique value andNOT the same as the Rabbit board. Once complete, return to step 4.mand the board to change its IP address to the new one by typing into Telnetnow connected to the board the command: set ip <new IP address> <Enter>where <new IP address> is in the form xxx.xxx.xxx.xxx. Once you hit <Enter>the IP address will be changed and the Rabbit will save the value and reboot whichmay take approximately 1 minute. The Telnet session will disconnect from theboard.9.Change your PC IP address to the same IP network as the Rabbit board.10.Telnet to the Rabbit board.e the following commands to complete configuration of the Rabbit board:a)set netmask xxx.xxx.xxx.xxxb)set gateway xxx.xxx.xxx.xxxc)save env12.Please record and inform Vitesse of the new IP address of the board when youreturn so that Vitesse can connect to and reconfigure the board.13.Re-label the Rabbit board with the new IP.3.4Using the Control SoftwareConnect the VSC8584EV Rabbit microcontroller RJ-45 directly to the PC or through anetwork switch if properly configured. Apply +5VDC to the EVB.Launch the GUI by double-clicking the GUI shortcut located in C:\ViperGUI_4_67 or onthe desktop if it has been moved there. The GUI Connection window shown in Figure5 should appear.Figure 5.GUI Connection WindowTo make a connection to the EVB, click “Rabbit” and enter the IP address of the EVB,then click on “Connect”. The display next to the IP address window should change to“Connected”. If it does not, check the IP address, or your network configuration untilconnection with the EVB can be successfully established.Double-click on “MII Registers” and the window shown in Figure 6 should appear:Figure 6.MII Registers GUI WindowVerify the device is up and running by reading MII Register 0. It should read back0x1040. Reading back all 0’s or all 1’s indicates a problem. A checked box means thebit is set to “1,” if unchecked it is “0”.3.4.1Board Initialization and Running PHY ScriptsOnce the evaluation board connectivity has been established and confirmed, the PHYshould be initialized. Initialization can be accomplished by running an init-scriptsequence, such as performed by the pre- and post-reset functions of the PHY APIstandalone app.While the init-script sequence may not required for specific operational modes, an init-script sequence is highly recommended to ensure correct performance over thegreatest set of user scenarios for the PHY. After initialization is performed, refer tothe PHY Datasheet section on Configuring of the PHY and PHY Interfaces for thedesired application.In order to execute an init-script, double-click on “Run PHY Script” within the GUIConnection Window to launch the Run PHY Script window as shown in Figure 7. Thisenables a user to load a script to configure the device rather than navigating throughRegisters pages. Click “Load” button, browse to a desired script file via the pop-uppanel, finally click “Run” button. After execution is completed, you should see read-back values in decimal as shown in Figure 8.The script syntax is command, phy address (in decimal), register address (in decimal),and register content (in either hexadecimal or decimal).Figure 7.Run PHY Script GUI Window (after script is loaded)Figure 8.Run PHY Script GUI Window (after script is executed)3.4.2Copper Media Operation (1000BASE-T)A single register write and some external coax cables enables 1G Ethernet traffic to bereceived by the VSC8584 RJ-45 port, routed through the VSC8584 and externally viacoax loopback cables through the SGMII interface and transmitted back to the trafficsource on the same copper port. First configure the SerDes in SGMII mode by writingto Micro page 18’d. This is a global setting and does not need to be applied per port.Steps for external SGMII loopback:1.Set up the Copper traffic source (i.e., IXIA or Smartbits)2.Connect an Ethernet cable to an RJ-45 Port 0.3.Connect two matched coax cables, J1 – J4 and J2 – J5.4.Write using the “Micro Page Registers” window: 18’d 0x80F0.5.When “Micro Page” 18’d is read back, bit 15 will clear.6.Linkup bit is in MII Reg 1, bit 2 (MII 1.2), read twice to updateTraffic should be flowing.Steps for SGMII forwarding port 0 ↔ port 1:1.Set up the Copper traffic source (i.e., IXIA or Smartbits)2.Connect one Ethernet cable to RJ-45 Port 0, second cable to RJ-45 Port 1.3.Connect four matched coax cables as follows:J1 <TDIN0+> to J6 <RXDOUT1+>J2 <TDIN0-> to J7 <RXDOUT1->J5 <RXDOUT0-> to J10 <TXDIN1->J4 <RXDOUT0+> to J9 <TXDIN1+>4.Write using the “Micro Page Registers” window: 18’d 0x80F0.5.When “Micro Page” 18’d is read back, bit 15 will clear.6.Linkup bit is in MII Reg 1, bit 2 (MII 1.2), read twice to updateTraffic should be flowing.3.4.3Fiber Media Operation (1000BASE-X)Follow all steps in section 3.4.2 with fiber media connection to (IXIA) and add thefollowing steps.1.Write using the “Micro Page Registers” window: 18’d 0x8FC1. (Global)2.When “Micro Page” 18’d is read back, bit 15 will clear.3.Write “MII Register” (PHY 0) 23’d 0x0204 (Sets Media Mode)4.Write “MII Register” (PHY0) 0’d 0x9040 (SW Reset for media mode setting tohave effect)5.Write “Extended MII Register” (PHY0) 19’d 0x0001 (Flip SIGDET polarity ifnecessary)6.Write “MII Register” (PHY0) 0’d 0x0004 (Disable Auto Neg if necessary)Traffic should be flowing.3.4.4Fiber Media Operation (100BASE-FX)Follow all steps in section 3.4.2 with fiber media connection to (IXIA) and add thefollowing steps.1.Write using the “Micro Page Registers” window: 18’d 0x8FD1. (Global)2.When “Micro Page” 18’d is read back, bit 15 will clear.3.Write “MII Register” (PHY 0) 23’d 0x0304 (Sets Media Mode)4.Write “MII Register” (PHY0) 0’d 0x9040 (SW Reset for media mode setting tohave effect)5.Write “Extended MII Register” (PHY0) 19’d 0x0001 (Flip SIGDET polarity ifnecessary)6.Write “MII Register” (PHY0) 0’d 0x0004 (Disable Auto Neg if necessary)Traffic should be flowing.3.5Useful Registers3.5.1Ethernet Packet GeneratorExtMII 29E is the Ethernet Packet Generator register. Refer to the datasheet forconfiguration options.A Good CRC packet counter is in ExtMII 18.13:0. A read of the register reads back thegood CRC packets and then clears the register so the subsequent reads will be 0 if notraffic has been received. If traffic has been received since the last read, bit 15 will beset.3.5.2Copper PHY Error CountersIdle errors = MII 10.7:0RX errors = MII 19.7:0False carrier = MII 20.7:0Disconnects = MII 21.7:0CRC errors = ExtMII 23.7:03.5.3Fiber PHY Error CountersGood RX CRC packets = Ext3MII 28.13:0Bad RX CRC packets = Ext3MII 29.7:0Good TX CRC packets = Ext3MII 21.13:0Bad TX CRC packets = Ext3MII 22.7:03.5.4Configuring 1588 Daisy-Chain SPI Time-StampingFor Master VSC8584EV, run these instructions for each port 0-3, as indicated by the“phy” variable below:smiwrite phy 31 4smiwrite phy 17 133smiwrite phy 18 0smiwrite phy 16 45088smiwrite phy 17 133smiwrite phy 18 0smiwrite phy 16 47136smiwrite phy 31 0Note the accesses above can be pasted into a text file and loaded via the customerGUI “Run PHY Script” feature, after substituting the desired port number 0-3 for “phy”above.For Slave VSC8584EV, run the same instructions listed above for Master VSC8584EVfor each port 0-3. Then, run the following write only on port 0:smiwrite 0 31 4smiwrite 0 26 0xc0f7smiwrite 0 31 04Additional InformationFor any additional information or questions regarding the device(s) mentioned in thisdocument, contact your local sales representative.。

System Configuration and Order-information GuideTX150S6March2009®Back View Inside View5inch BayDVD-ROM DriveFloppy Disk DriveHard DiskBayKeyboardDisplay10/100/1000BASE-T Connector5inch BayPower Supply DIMM SlotCPU10/100/1000BASE-TX Connector (for Remote Management Controller)PCI SlotMouse Serial PortParallel Port (optional )Power SupplyHard Disk Bay PCI Slotfront sideThis document contains basic product and configuration information that will enable you to configure your system.Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.You can configure your individual PRIMERGY servers in order to meet your specific requirements.Please follow the lines.If there is a junction,you can choose which way or component you would like to take.Go through the configurator by following the lines from the top to the bottom.The color of the junction means as follows.Data SheetType Mono-Processor Tower ServerModel Base Unit Core TM 2Duo E7300(2.66GHz)CPUFrequencies Second-Level-CacheNumber of processors 1(max.1)Number of coresFront-Side-BusChipsetIntel®3210TPM (Trusted Platform Module)standard (onboard)*9MemoryStandard 1GB (1GB ECC DDR2SDRAM DIMM x 1)Maximum *18GB (2GB ECC DDR2SDRAM DIMM x 4)Graphics Controller incl.Remote Management Controller,VRAM :8MB Resolution *2640x480/800x600/1024x768/1280x1024dotInternal Bays Number of bays 4(hot plug)3.5inch Available HDD *33.5inch,SAS,15krpm,73.4GB (PG-HDB75A) 3.5inch,SATA,7.2krpm,80.0GB (PG-HDF87B)HDD 3.5inch,SAS,15krpm,146.8GB (PG-HDB45A) 3.5inch,SATA,7.2krpm,160.0GB (PG-HDF67B)(SAS/SATA)3.5inch,SAS,15krpm,300.0GB (PG-HDB35A) 3.5inch,SATA,7.2krpm,500.0GB (PG-HDF57B)3.5inch,SAS,15krpm,450.0GB (PG-HDB55A)Maximum *31.8TB (450.0GB x 4)*102.0TB (500.0GB x 4)Internal Bays 5inch 3(1free bay)DVD-ROM Max 16DVD-ROM /Max 40CD-ROM (SATA)PCI SlotsPCI Express (x8)[x8]2(SAS Controller occupies one slot.)PCI Express (x4)[x8]1PCI (32bit/33MHz)[5.0V]3(3x Full Size)RAIDstandard (SAS Controller,with RAID1function)*10Software RAID SAS /SATA Interface SAS x 4portsSATA x 4ports Internal FDD3.5inch (1.44MB/720KB)Network Interface (onboard)1port (1000BASE-T/100BASE-TX/10BASE-T)InterfacesDisplay (Analog RGB),Serial Port x 1(D-SUB 9pins)(2when Serial Port (PG-COM04)is applied.)Parallel Port (optional D-SUB 25pins)Keyboard (PS/2type Mini DIN 6pins),Mouse (PS/2type Mini DIN 6pins),USB x 6(ver.2.0)(Internal :x 1,External :x 5)Server Management Software ServerView (standard)Remote Service functionstandard (onboard,Remote Management Controller)connector1port (100BASE-TX/10BASE-T)Power supplyVoltageAC 100-127V (50/60Hz)/AC 200-240V (50/60Hz)x 1(max.1)Power consumption 280W /1008kJ/h (max.)Redundant power supply-Redundant Fan -Dimensions (mm)Tower:205(W)x615(D)x444(H)Rackmount (when Rack Conversion kit (PG-R1CK22/PGBR1CK22)is applied.):440(482incl.protruding parts ）(W)x562(617incl.protruding parts ）(D)x221.2(5U)(H)WeightTower:26kg (max.)/Rackmount:26kg (28kg incl.rack rails)(max.)Environmental Conditions Temperature10-35°C /Humidity 20-80%(non condensing ）OS Support *4Windows Server®2008Standard (32-bit)/Windows Server®2008Standard (64-bit)Windows Server®2003R2,Standard Edition (SP2)/Windows Server®2003,Standard Edition (SP2)Windows Server®2003R2,Standard x64Edition (SP2)/Windows Server®2003,Standard x64Edition (SP2)Windows®Small Business Server 2003R2(SP2)/Windows®Small Business Server 2003(SP2)Red Hat Enterprise Linux ES (v.4for x86)*11/Red Hat Enterprise Linux 5(for x86)*11*12Red Hat Enterprise Linux ES (v.4for EM64T)*11/Red Hat Enterprise Linux 5(for Intel64)*11*12Attached tool (Standard)ServerStart (Setup Support tool)*13*1.Available memory capacity will be changed by the type of OS.Please find more details in Notes [Memory OS Compatibility List].*2.Resolution is determined by functions of the display monitor and OS.*3.HDD capacity is calculated according to the formulas 1GB=10003byte and 1TB=10004byte.*4.Drivers for Linux are not attached.Please download and use drivers of the following URL./global/services/computing/server/ia/driver/*5.CPU Conversion kit:Core 2Duo E7300(2.66GHz)->Xeon X3320(2.50GHz)(PGBFU51N)is available for upgrading to Intel®Xeon®X3320(2.50GHz).*6.CPU Conversion kit:Core 2Duo E7300(2.66GHz)->Xeon X3220(2.40GHz)(PGBFU51M)is available for upgrading to Intel®Xeon®X3220(2.40GHz).*7.CPU Conversion kit:Core 2Duo E7300(2.66GHz)->Xeon E3120(3.16GHz)(PGBFU51L)is available for upgrading to Intel®Xeon®E3120(3.16GHz).*8.CPU Conversion kit:Core 2Duo E7300(2.66GHz)->Xeon E3110(3GHz)(PGBFU51K)is available for upgrading to Intel®Xeon®E3110(3GHz).*9.TPM is available for BitLockerTM Drive Encryption of Windows Server®2008.*10.In case that SAS Controller installed as standard is used for RAID configuration,only 2HDDs of same capacity and same rpm can be connected.*11.Regarding supported kernel versions of Linux,please refer to the following list./downloads/PRMRGY/linux-os-kernel-compatibility-list.pdf *12.VM (Virtual Machine)function is not supported.*13.ServerStart doesn't support Linux.*.Noise level is 34dB.PGUT1566APGUT1566B1333MHz (Intel®Xeon®X3320(2.50GHz)/Intel®Xeon®E3120(3.16GHz)/E3110(3GHz))1066MHz (Intel®Xeon®X3220(2.40GHz)/Intel®Core TM 2Duo E7300(2.66GHz))Intel®Xeon®X3320(2.50GHz)*5/X3220(2.40GHz)*6/Intel®Xeon®E3120(3.16GHz)*7/E3110(3GHz)*8/Intel®Core TM 2Duo E7300(2.66GHz)2x4MB (Intel®Xeon®X3220(2.40GHz))/6MB (Intel®Xeon®X3320(2.50GHz)/Intel®Xeon®E3120(3.16GHz)/E3110(3GHz))/3MB (Intel®Core TM 2Duo E7300(2.66GHz))3.5inch SAS model 3.5inch SATA model4per processor (Intel®Xeon®X3320(2.50GHz)/X3220(2.40GHz))/2per processor (Intel®Xeon®E3120(3.16GHz)/E3110(3GHz)/Intel®Core TM 2Duo E7300(2.66GHz))Configuration Diagram [3.5inch SAS model]*Components installed as standard configuration marked in grey.[3.5inch SATA model]*Components installed as standard configuration marked in grey.Mountable I/O Options[3.5inch SAS model ]*[n]:Installation Priority *#:standard*-:cannot be installed[3.5inch SATA model ]*[n]:Installation Priority *-:cannot be installedNotes on SATA HDD1.TX150S6(3.5inch SATA model)can be used on a small scale without frequent data access about eight hours a day,for five years.2.If you would like to use server 24hours a day,every day,or for database with frequent data access,or for mission-critical tasks which require high reliability,please purchase another SAS model.3.Please backup data on a regular basis to prevent loss of data.4.Dump function of Linux is not available for TX150S6(3.5inch SATA model).If you would like to use dump function of Linux,please purchase another SAS model.Connection TableRack Conversion kit(Tower to Rackmount (5U))PG-R1CK22PGBR1CK22(for CTO)*.In case that Rack Conversion kit is ordered by CTO,mouse is not attached with base unit.*CPU Conversion Kit (available only for a Configure to Order (CTO)option;no separate shipment is possible)NotesCPU Conversion kit:Intel®Core TM 2Duo E7300(2.66GHz/3MB)->Intel®Xeon®X3320(2.50GHz/6MB)Core 2Duo E7300(2.66GHz)Convert the CPU installed as standard in the base unit to the other.->Xeon X3320(2.50GHz)(Note:This option can be ordered only as coupled with the base unit.(for CTO)A separate shipment is not possible.)CPU Conversion kit:Intel®Core TM 2Duo E7300(2.66GHz/3MB)->Intel®Xeon®X3220(2.40GHz/2x4MB)Core 2Duo E7300(2.66GHz)Convert the CPU installed as standard in the base unit to the other.->Xeon X3220(2.40GHz)(Note:This option can be ordered only as coupled with the base unit.(for CTO)A separate shipment is not possible.)CPU Conversion kit:Intel®Core TM 2Duo E7300(2.66GHz/3MB)->Intel®Xeon®E3120(3.16GHz/6MB)Core 2Duo E7300(2.66GHz)Convert the CPU installed as standard in the base unit to the other.->Xeon E3120(3.16GHz)(Note:This option can be ordered only as coupled with the base unit.(for CTO)A separate shipment is not possible.)CPU Conversion kit:Intel®Core TM 2Duo E7300(2.66GHz/3MB)->Intel®Xeon®E3110(3GHz/6MB)Core 2Duo E7300(2.66GHz)Convert the CPU installed as standard in the base unit to the other.->Xeon E3110(3GHz)(Note:This option can be ordered only as coupled with the base unit.(for CTO)A separate shipment is not possible.)No AFT/ALB Support No AFT/ALB SupportRemarks13[1]No AFT/ALB Support No AFT/ALB Support--23-[3][2][1]2-[1]2Full Height-Max No.of Mount-53Eth.Ctrl 1x1Gbit PCI-E 1000-BASE-TPG-285PCI Express (x1)-Eth.Ctrl 1x1Gbit PCI-E 1000-BASE-TPG-289---PCI/32bit-1-1[1][1]2[3]PCI Express (x1)[2]---[2]-Type[2][1]-Eth.Ctrl 1x1Gbit PCI 1000-BASE-TPG-18535.0Vx8socketlane PCI Slot-Eth.Ctrl 2x1Gbit PCI-E 1000-BASE-TPG-2861PCI Express (x4)---[2]-SCSI Ctrl U320PG-2281PCI Express (x4)-SAS Controller (4ports)-PCI Express (x4)-SAS RAID Ctrl(8ports /512MB /with BBU )PG-248CPCI Express (x4)-Internal array Internal arrayStandard,Internal array [1]Internal/External SCSI Controller-6133[1]-21--#--[2]---[1]Full Height5.0Vx8socketSAS RAID Ctrl(8ports /256MB /without BBU )PG-248B PCI Express (x4)----456PCI PCI Express23Mount PriorityMountable CardsBusPCI Slot32bit/x4x833MHz lanelane 36Internal arrayInternal/External SCSI ControllerMax No.of MountRemarks1234Mountable CardsBus632bit/1x4Product IDMount PriorityPCI PCI Expresslanex833MHz [1]SCSI Ctrl U320PG-2281--Eth.Ctrl 1x1Gbit PCI 1000-BASE-TPG-1853PCI/32bit[3]-[2][1]---[3][2]Eth.Ctrl 1x1Gbit PCI-E 1000-BASE-TSAS RAID Ctrl(8ports /256MB /without BBU )PG-248B PCI Express (x4)PG-285PCI Express (x1)Eth.Ctrl 1x1Gbit PCI-E 1000-BASE-TPG-289PCI Express (x1)----[1]Eth.Ctrl 2x1Gbit PCI-E 1000-BASE-TPG-2861PCI Express (x4)---[3][2][3][2][1]2PGBFU51L PGBFU51N PGBFU51K PGBFU51M PCI Express (x4)-1--Memory Module-1GB (1GB DIMM x 1)PG-RM1BHPGBRM1BH (for CTO)Memory Module-2GB (2GB DIMM x 1)PG-RM2BHPGBRM2BH (for CTO)Memory Module Conversion kit-2GB (2GB DIMM x 1)PGBRU2BH2(for CTO)*.Notes on installing memory1.Memory is installed by one or more DIMMs.2.The memory capacities of the slots should be in ascending order in the following sequence:1A ->1B ->2A ->2B3.Available memory capacity depends on the type of OS and some memory area is used for PCI resource management.The following table shows installed memory capacity and available memory capacity.Windows Server®2008Standard (64-bit)Windows Server®2003R2,Standard x64Edition (SP2)Windows Server®2003,Standard x64Edition (SP2)Red Hat Enterprise Linux ES (v.4for x86)Red Hat Enterprise Linux 5(for x86)Red Hat Enterprise Linux ES (v.4for EM64T)Red Hat Enterprise Linux 5(for Intel64)*1.If installed memory capacity is more than 2.0GB,it is necessary to set "PAE (Physical Address Extension)"of OS.The following (1)and (2)are the ways to set "PAE"of OS,and Fujitsu recommends (1).(1)Set "PAE"of OS.Regarding setting "PAE"of OS,please refer to website of Microsoft.(2)Set "DPE (Data Execution Prevention)"of CPU.If "DPE"of CPU is set as "available"by executing the following procedure,"PAE"of OS is set automatically.[1]Execute "BIOS setup utility".[2]Select "Advanced"menu.[3]Select "Advanced Processor"submenu.[4]Set "NX Memory Protection"as "Enabled".Connecting Internal HDD and Internal Backup DevicesIf you would like to order internal HDD and internal backup devices,please order optional cards/cables according to the following table.(''1)USB Backup Devices:PG-DT5041/PG-RD1021(''2)SCSI Wide Backup Devices:PG-LT302/PG-LT201/PG-LT1022.0GB *1Same as installed memory capacityWindows Server®2008Standard (32-bit)Windows Server®2003R2,Standard Edition (SP2)Windows Server®2003,Standard Edition (SP2)Windows®Small Business Server 2003R2(SP2)Windows®Small Business Server 2003(SP2)OS Same as installed memory capacityInstalled MemoryCapacity~2.0GB2.0GB~4.0GB ~8.0GB Available Memory Capacity[3.5inch SAS model]HDD SAS15k73GB hot plug3.5inchPG-HDB75APGBHDB75A(for CTO)HDD SAS15k147GB hot plug3.5inchPG-HDB45APGBHDB45A(for CTO)HDD SAS15k300GB hot plug3.5inchPG-HDB35APGBHDB35A(for CTO)SAS RAID Ctrl HDD SAS15k450GB hot plug3.5inchPG-HDB55APGBHDB55A(for CTO)SAS RAID Ctrl(8ports/512MB/with BBU)PG-248C*.RAID0/1/1+0/5/6configuration can be set.SAS RAID Ctrl Conversion kit(4ports->8ports/512MB/with BBU)PGB2U48C(for CTO)*.RAID0/1/1+0/5/6configuration can be set.*.SAS RAID Ctrl includes a battery as standard equipment.The battery lifetime is3years.Please purchase the following spare battery and replace the old battery with new onebefore the battery runs out.Battery Backup UnitPG-BBU1[3.5inch SATA model]HDD SATA7.2k80GB hot plug3.5inchPG-HDF87BPGBHDF87B(for CTO)HDD SATA7.2k160GB hot plug3.5inchPG-HDF67BPGBHDF67B(for CTO)HDD SATA7.2k500GB hot plug3.5inchPG-HDF57BPGBHDF57B(for CTO)*.RAID0/1/1+0/5/6configuration can be set.TapeDrv LTO3Ultrium3/Ultrium2400GBPG-LT302PGBLT302(for CTO)*.One internal backup device can be mounted.Tape Drv LTO2Ultrium2200GB PG-LT201PGBLT201(for CTO)*.One internal backup device can be mounted.Tape Drv LTO Ultrium1100GB PG-LT102PGBLT102(for CTO)*.One internal backup device can be mounted.Tape Drv DAT7236GB internalPG-DT5041PGBDT5041(for CTO)*.One internal backup device can be mounted.Internal Data Cartridge Drive Unit PG-RD1021PGBRD1021(for CTO)*.One internal backup device can be mounted.*.If you would like to purchase data cartridges,please refer to the following web site./sales-apac.htmlDVD-RAM /DVD-ROM /CD-ROMUSB Extension Cable PG-CBLU002SCSI Ctrl U320SCSI Cable I/O ModulePRIMERGY SX10S2PG-2281PG-CBLS034PGBIMS01(for CTO)(4bays)SCSI Cable PG-R2BC1PG-CBLS035*.Please find more details in Rackmount [Backup Device Cabinet (PRIMERGY SX10S2)].Eth.Ctrl PG-2861PGB2861(for *Dual PortEth.Ctrl PG-289PGB289(for Eth.Ctrl PG-285PGB285(for *No AFT/ALB *.Supported Eth.Ctrl PG-1853PGB1853(for CTO)*No AFT/ALB SupportSerial Port PG-COM04Parallel Port Option PG-PP06Specifications are subject to change without notice.For the latest detailed information,contact your local representative.All brand names and product names are trademarks and registered trademarks of their respective holders.©2008Fujitsu Limited.All rights reserved.Printed in Japan.Twist Pair Cable (Category 5e)。

Philips PowerLifeSteam iron45 g/min continuous steam160 g steam boostSteamGlide soleplateGC2995/80Built to perform, day after day4x longer life with SteamGlide soleplate*For great results day after day, you want an iron that never lets you down. With its anti-scratch SteamGlide soleplate, high consistent steam output and integrated calc-clean, thishigh quality iron gives you performance that lasts.Comfortable ironing•Comfortable, textured handle for easy grip•Drip-stop keeps garments spotless while ironingFast & powerful crease removal•2400 W to heat up quickly•Up to 160 g steam boost blasts stubborn creases•Vertical steaming for hanging fabrics•Steam output up to 45 g/min for strong, steady performanceLong lasting performance•Built-in calc-clean slider, long-lasting steam performance•Tested cord for maximum durability and safety•Scratch resistant SteamGlide soleplate provides good glidingHighlights2400 W to heat up quicklyDelivers a fast warm-up and powerful performance.Steam boost up to 160 g Penetrates deeper into fabrics to easily remove stubborn creases.Continuous steam up to 45g/minStrong and consistent steam output to remove creases faster.Vertical steam The vertical steam function lets you refresh garments right on the hanger and remove creases from curtains as they hang. No ironing board required.SteamGlide soleplateOur special SteamGlide soleplate smoothly glides over any fabric. It's also non-stick, scratch-resistant and easy to clean.Built-in calc-clean sliderThis iron operates with ordinary tap water. Calc-clean is a built-in cleaning function to remove calcium buildup, or limescale, and maintain peak performance.Quality-tested cordAll our steam iron cords are rigorously tested for maximum safety and durability.No more messy drippingOur Drip Stop system lets you iron delicate fabrics at low temperatures with confidence. There’s no need to worry about water droplets causing stains.Comfortable handleA textured handle ensures you a comfortable, ergonomic grip, so you can keep hold of the iron without ever slipping.Issue date 2023-08-22 Version: 1.1.1EAN: 87 10103 88942 7© 2023 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsEasy to use•Water tank capacity: 320 ml •Soleplate name: SteamGlide •Tap water suitable•Drip Stop•Extra stable heel rest •Extra large filling hole Guarantee•2 year worldwide guarantee Fast crease removal •Power: 2400 W •Continuous steam: 45 g/min •Steam boost: 160 g•Water sprayGreen efficiency•User manual: 100% recycled paperScale management•Descaling and cleaning: Built-in Calc Clean SliderSize and weight•Packaging dimensions (WxHxL):33.2x16.7x13.7 cm•Weight of iron: 1.255 kg•Product dimensions (WxHxL): 31.2x14.7x12.7 cm*Tested vs. Philips non-stick soleplate。

The following manual and guides were carefully prepared by the SilverStone engineering team to help you maximize the potential of your SilverStone product. Please keep this manual for future reference when upgrading or performing maintenance on your system. A copy of this manual can also be downloaded from our website at:Installation and system optimization guide:SpecificationAC InputDC OutputProtectionTimingEnvironmentSafetyElectromagnetic compatibility (EMC) MTBFMechanical P.1 P.1 P.2 P.4 P.5 P.6 P.6 P.6 P.7 P.7World’s smallest, full-modular ATX power supplies2.1 DC voltage regulation2.2 Load ranges2.3 Output Ripple2.3.1 Ripple regulation1. Maximum combined load on +3.3V and +5V outputs shall not exceed 150W.2. Maximum combined load on +12V outputs shall not exceed 120A(1440W).3. Maximum continuous total DC output power should not exceed 1500W.4. Peak total DC output power should not exceed 1600W.5. Peak power and current loading shall be supported for 12 second.2. DC OUTPUT Parameter+3.3V+5V+12V1+12V2-12V+5VSB Range +/-3 +/-3 +/-3 +/-3 +/-10 +/-5 Min +3.20+4.85+11.64+11.64-13.20+4.75Nom.+3.30+5.00+12.00+12.00-12.00+5.00Max +3.40+5.15+12.36+12.36-10.80+5.25Unit Volts Volts Volts Volts Volts VoltsParameter+3.3V+5V+12V1+12V2-12V+5VSB Min(optional)0.20.20.20.200Nom.---- --Max 252570700.33.5Unit Amps Amps Amps Amps Amps AmpsParameter+3.3V+5V+12V1+12V2-12V+5VSB Ripple&Noise 505012012012050Unit mVp-p mVp-p mVp-p mVp-p mVp-p mVp-pSTRIDER GOLD S SERIES ST1500-GSWorld’s smallest, full-modular ATX power supplies3.1 Over current protectionThe power supply shall have current limit to prevent the +3.3V,+5V,and +12V outputs from exceeding the values shown in the following Table.If the current limits are exceeded the power supply shall shutdown and latch off.3.0 PROTECTIONVoltage +3.3V +5V+12V1 +12V2Over Current Limit (Iout limit) 30A minimum; 48A maximum 30A minimum; 48A maximum 75A minimum; 100A maximum 75A minimum; 100A maximumVoltage +3.3V +5V+12V Minimum3.905.7013.3Nominal4.206.3015.0Maximum4.507.0016.5UnitVoltsVoltsVolts3.2 Over T emperature ProtectionThe power supply will be protected against over temperature conditions caused by loss of fan coolng or excessive ambient temperature. In an OTP condition the PSU will shutdown. When the power supply temperature drops to within specifide limits, the power supply shall restore power automatically. The OTP circuit must have built in hysteresis such that the power supply will not oscillate on and off due to temperature recovering condition.3.3 Over-power protectionThe power supply will be shutdown and latch off when output power within 105~150% of rated DC output. Note: Assurance machine can work at low voltage,full load won't damage machine.3.4 Under voltage protectionIn an under voltage fault occurs, the supply will latch all DC outputs into a shutdown state when +12V, +5V & +3.3V outputs under 85% of it's maximum value.3.5 Over voltage protectionThe over voltage sense circuitry and reference shall reside in packages that are separate and distinct from the regulator control circuity and reference.No single point fault shall be able to cause a sustained over voltage condition on any or all outputs.The supply shall provide latch-mode over voltage protection as defined in Table.STRIDER GOLD S SERIES ST1500-GSWorld’s smallest, full-modular ATX power supplies5.1 Operation5. ENVIRONMENT6.1 Underwriters Laboratory (UL) recognition.6.2 The power supply must bear the German Bauart Mark from TUV.The power supply designed to meet UL 1950.6. SAFETY7.1 IEC 61000-4-2 ESD LEVEL X20KV4.7.2 IEC 61000-4-3 radiated electrical field requirement.7.3 IEC 61000-4-4 BURST .7.4 IEC 61000-4-5 surge Voltages.7. ELECTROMAGNETIC COMPATIBILITY (EMC)T emperatureRelative Humidity 0 to 40℃10 to 90%, non-condensing 5.2 Shipping and StorageT emperatureRelative Humidity -10 to 50℃5 to 95%, non-condensing5.3 AltitudeOperatingStorage 10,000FT max 50,000FT maxSTRIDER GOLD S SERIES ST1500-GS。

是整机保修一年收银系列使用说明书适用型号TM-30A /TM-15A / TM-6AJB-30A / JB-15A / JB-6A2009年7月Version2.30A上海友声衡器有限公司 & 上海精函衡器有限公司沪制00000033号沪制00000319号地址：上海市闵行区莘庄工业区春光路99弄58号邮编：201108厂址：上海市崇明县庙镇经济开发区宏海公路349号邮编：202165 公司总机：（021）54831805/6/7/8 技术部总机：（021）54831858传真：（021）54831803 主页：指定代理与售后服务电话：联系人：感谢您使用上海精函有限公司的产品！在您开始使用本产品前，请务必仔细阅读《前言》中的内容，并严格遵守这些事项！1.1注意事项➢确保电源插头和电源线连接正常，使用三芯电源线进行连接，如果使用了拖线板，则拖线板的插口也要是三芯的，确保三芯的地线妥善的与建筑大地连接，以避免漏电的情况。

➢切勿用沾湿的手插拔电源插头，这样可能导致触电。

➢严禁将身体重力压在秤盘上，以免损坏称重传感器。

➢严禁撞击重压，或用重物冲击秤盘，以免损坏称重传感器，同时勿超过其最大称量范围。

➢严禁淋雨或用水冲洗；如不慎沾水，请用干布擦试干净；若秤体工作异常，请尽速送到经销商处，我们将竭诚为您服务。

➢严禁将条码秤置于极低温、高温或潮湿的场所，这样可能导致秤体工作异常甚至损坏。

➢严禁用有机化学溶剂擦拭外壳和面板。

➢严禁私自打开秤体，也不要让非专业的维修人员修理本秤。

➢严禁将手从打印机旋出位置伸入，该行为可能造成220V触电。

➢在有本公司专业维修人员指导下打开秤体时，请务必提前拔出220V的交流供电。

➢不要试图拆卸秤体内的开关电源，高压电容需要非常长时间才能完全放电，未放电的情况下拆卸可能导致触电。

➢建议使用本厂出售的热敏纸，本秤体对本厂出售的热敏纸进行过长时间的测试与优化，可以较好的保证头片的使用寿命。

Revision HistoryContentsIntroduction 5 Overview (5)Supporting Resources (5)Intended Audience (5)Service Overview 6 Service Purpose (6)Benefits of GetMyPrice Service (6)Valid Request Combinations (6)Positive Extension Proration (6)Premium Multi-Year Anniversary True-up (7)Service Endpoints 8 Staging (8)Production (8)Service Request & Response 9 Request (9)Response (11)Sample Requests / Responses 13 GetMyPrice by Customer number, Part number and date (13)GetMyPrice by Customer number, Part number, date and Agreement number (13)GetMyPrice with Positive Extension proration (14)GetMyPrice with Add Product and future start date (15)Generic error applicable for all request types (15)Formatting Standards 16 Error Messages 17 HTTP Status codes & errors (17)400 Bad Request errors (18)TablesTable 1: Detailed JSON Request Structure (10)Table 2: Detailed JSON Response Structure (12)Table 3: HTTP Status Codes & Errors (17)Table 4: 400 Bad Request Errors (18)FiguresNo table of figures entries found.IntroductionOverviewThe Autodesk Partner Web Services platform is an automation solution for low-touch order placement by partners directly to Autodesk. This platform enables true B2B web service transactions between distribution partners and Autodesk.For partners to effectively implement Autodesk web services, partner developers should be familiar with RESTful web services, OAuth, and the JSON data-interchange format. Supporting ResourcesAutodesk Partner Developer Portal: The Autodesk Partner Developer Portal is a site for partner developers to build and test applications by subscribing to Autodesk Partner Web Services. The portal features a robust repository of service documentation, an ongoing conduit to the services to support partner teams, and a community to allow partner developers to share insights and information with each other. A partner administrator can invite and manage developers and keep track of all applications they create. Developers can learn and test services to help with application integration. For more information, please visit the Autodesk Partner Developer Portal.Authentication API Documentation: The Authentication API Documentation is intended to help partner developers understand and use the OAuth 2.0 industry-standard protocol for authorization required to use Autodesk Partner Web Services. The documentation provides basic information on web service integration and examples of developing a typical application. For more information, please visit the Autodesk Partner Developer Portal for the latest version of the API Authentication Guide.Intended AudienceThis guide is designed to teach architects, consultants, and developers about the Autodesk Partner Web Services platform, the onboarding process, and API implementation guidelines.Service OverviewService PurposeThe purpose of the GetMyPrice service is to allow for the following:•Provide Disti/DVAR with their purchase price•Provide non-direct Partners with SRP•During order creation (via PlaceOrder), provide the price that the Partner is paying on that particular order (e.g. if adding to an existing contract, the price on the order may need to be pro-rated)Benefits of GetMyPrice Service• A lightweight REST web service that can be consumed easily from any application via HTTP(s) connection•Provides correct pricing by Partner and SKU•Assists with order entry and validation•Improves data quality by retrieving real time price informationValid Request CombinationsGetMyPrice API allows different query combinations based on Partner needs. While Customer CSN, Part Number and Price Date are always mandatory, the following combinations are possible (please note that Quantity is optional. If it is not populated, 1 will be assumed):•Only mandatory parameters•Mandatory parameters + agreement number•Mandatory parameter + agreement number + agreement end datePositive Extension ProrationThe Distributor would need to identify the prorated price for extending a customer’s subscription to a new end date in order to accurately quote the Reseller and submit the correct price to Autodesk in order for the order to be accepted. GetMyPrice API provides this functionality following the steps below:•The Distributor can use GetMyPrice API to identify the prorated price of a renewal SKU material in order to successfully submit a positive extension order via PWS.•The prorated price will be calculated based on the following partial term:o Start Date of Partial Extension Term: The current service contract end date + 1 day.o End Date of Partial Extension Term: The new end date requested by the customer.•The prorated price is based on the total number of months (rounded up) the customer wished to extend their service contract for, and the number of months as defined by their servicecontract’s or materials’ contract term.o Possible contract terms:▪Annual▪3-Yearo The total number of months can exceed the materials’ contract term (i.e. total number of months can be 13 for an annual material, therefore 13/12).Premium Multi-Year Anniversary True-upPrice proration for True-up orders are based on anniversary date. Due to this, Partners will need to provide the True-up opportunity number so the system can determine the Anniversary Date and Contract End Date from that opportunity and use them for Price calculations.Service Endpoints Staginghttps:///v1/sku/prices Productionhttps:///v1/sku/pricesService Request & Response RequestThe following tables explain the schema for the Request of the GetMyPrice service.Please note that:•Bold denote objects and arrays•Cardinality: (M) Mandatory, (O) OptionalAutodesk® Partner WebServices GetMyPrice Service Reference Manual • 9* Please refer to https:///contents/files/user-guides/en/pws-api-authentication-guide.pdf for API Authentication details.ResponseThe following information represents the response schema for the GetMyPrice service. Please note that:•Bold denote objects and arrays•Cardinality: (M) Mandatory, (O) OptionalSample Requests / ResponsesThe following information are sample requests and responses to be used as reference. GetMyPrice by Customer number, Part number and dateGetMyPrice by Customer number, Part number, date and Agreement numberGetMyPrice with Positive Extension prorationGetMyPrice with Add Product and future start dateGeneric error applicable for all request typesFormatting StandardsUUID v4 – Unique, randomly generated stringhttps:///wiki/Universally_unique_identifier#Version_4_.28random.29 ISO 8601 – YYYY-MM-DD date format/iso/home/standards/iso8601.htmISO 639-1 – Two letter language code/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=22109 ISO 3166-1 alpha-2 format – two letter country code form/iso/country_codesRFC 1480 – Common Format and MIME Type for Comma-Separated Values (CSV) Files https:///html/rfc4180Error MessagesHTTP Status codes & errorsThe following are all known HTTP status codes, error codes, and messages returned by the service due to a failure to authenticate, bad request, or exceeding maximum traffic allowed by the service.400 Bad Request errorsThe following are all error codes, messages, and the reason for error returned when the service produces a 400 Bad Request or 500 Internal Server Error response.。

price gap 例句1. The price gap between the two products is quite significant.2. The price gap between the two stores is noticeable.3. The price gap between the luxury brand and the generic brand is considerable.4. The price gap between online retailers and physical stores can be significant.5. There is a price gap between the original and discounted price of the product.6. The price gap between different sizes of the productis minimal.7. The price gap between the two competing companies is widening.8. The price gap between the premium and budget optionsis quite substantial.9. The price gap between the two cities is much smaller than expected.10. The large price gap between the two models of the car is due to added features.11. The price gap between the branded and unbranded clothing is substantial.12. The price gap between the high-end and low-end restaurants is noticeable.13. The price gap between the handmade and factory-produced items is significant.14. The price gap between different regions is influenced by varying costs of living.15. The price gap between the two hotel bookings is quite substantial.16. The price gap between the city center and suburbs is noticeable.17. The price gap between different airlines can be quite significant.18. The price gap between organic and regular produce is narrowing.19. The price gap between different car insurance providers is considerable.20. The price gap between different package options is substantial.21. The price gap between the two real estate listings is quite significant.22. The price gap between different medical treatments can be substantial.23. The price gap between the two competitors isaffecting market share.24. The price gap between different models within the same brand can be confusing.25. The price gap between different service providers is noticeable.26. The price gap between the two vacation packages is quite significant.27. The price gap between online and offline shopping is shrinking.28. The price gap between different generations of smartphones is evident.29. The price gap between fair-trade and conventional coffee has narrowed.30. The price gap between the two stocks has widened in recent months.31. The price gap between organic and non-organic beauty products is substantial.32. The price gap between the two clothing brands is quite significant.33. The price gap between the two cellphone plans is noticeable.34. The price gap between different tax brackets is quite substantial.35. The price gap between luxury and economy car rentals is significant.36. The price gap between different energy providers is noticeable.37. The price gap between high-end and budget hotel accommodations is evident.38. The price gap between vegan and non-vegan food options is narrowing.39. The price gap between different internet service providers can be substantial.40. The price gap between different coffee shop chains is noticeable.41. The price gap between the two streaming services is significant.42. The price gap between renewable and non-renewable energy is substantial.43. The price gap between branded and generic medications is noticeable.44. The price gap between the two laptops is quite significant.45. The price gap between luxury and affordable fashion brands is evident.46. The price gap between different cable TV packages can be substantial.。