文阳木业_合丽拼花系列产品报表
- 格式:xls
- 大小:27.50 KB
- 文档页数:2
100种常用木材木纹大全[名称]: 桦木Brich/Betula spp.(高加索桦Betula Medwediewii 白桦Betula platyphylla 西南桦Betula alnoides)[来源]: 欧洲大陆,地中海地区除外;北美;温带亚洲:印度、巴基斯坦、斯里兰卡[林地]: 桦树是先锋物种,很容易在次生林地中萌发。
但仍有部分桦木来自斯堪的纳维亚、俄罗斯和加拿大的原始森林。
[用途]: 地板/胶合板; 装饰面板;家具[提示]: 有FSC认证产品[介绍]: 桦木为冰川退却後最早形成的树木之一。
耐寒、速生,对病虫害较有免疫力。
桦木年轮略明显,材质结构细腻柔和光滑,质地较软或适中。
桦木富有弹性,干燥时易开裂翘曲,不耐磨。
加工性能好,切面光滑,油漆和胶合性能好。
常用于雕花部件,现在较少用。
易分特征是多“水线”(黑线)。
桦木属中档木材,实木和木皮都常见。
[名称]: 黑胡桃(黑核桃)Black Walnut/Juglans nigra[来源]: 北美洲[林地]: 次生林和人工林[用途]: 家具;地板/胶合板[提示]: 有FSC认证产品[介绍]: 黑胡桃木盛产于北美洲、北欧等地。
胡桃木的边材是乳白色,心材从浅棕到深巧克力色,偶尔有紫色和较暗条纹。
胡桃木无特殊气味和滋味,纹理直,结构细至略粗,均匀。
黑胡桃呈浅黑褐色带紫色,弦切面为美丽的大抛物线花纹(大山纹)。
黑胡桃比一般的木材要昂贵一点,主要用于家具、地板和拼板。
[名称]: 樱桃木(红樱桃、黑樱桃、黑稠李、红稠李)Cherry /Prunus serotina[来源]: 欧洲,地中海地区除外;北美洲[林地]: 红樱桃在全球温带地区都有种植;西欧和美国的樱桃木几乎都来自次生林;东欧的樱桃木有可能来自原始森林[用途]: 家具;地板/胶合板;乐器[提示]: 有FSC认证产品[介绍]: 樱桃木主要产地为北美,商品材来自以美国为主的东部各个地区。
樱桃木的心材颜色由艳红色至棕红色,日晒后颜色变深。
胶合木设计制作与质量控制周先雁;曹磊;周佳乐;曾丹【摘要】Glulam is an engineering wood composite which is high ratio of strength to mass, beauty, biodegradable and widely applied in engineering fields such as bridge, building. Larch is widely spread in China and not only abundant in production and storage, but also it has properties of high strength and is suitable for industrial processing and utilization. According to the status of manufacturing and utilizing of domestic larch glulam for structure and combining manufacturing test in the factory, the production process of glulam and quality control from the choice of layer board, finger technology, gluing technology, assembly technology and quality inspection and so on were introduced, and the technological parameters and requirements of the whole manufacturing process were briefly described. Finally, the existing problems and suggestions on the glulam manufacture promotion in our country are put forward.%胶合木是一种强质比高、美观、可降解的工程复合材,且被广泛应用于桥梁、建筑等工程领域。
客户回馈活动方案优秀7篇感恩节回馈客户的活动方案篇一活动时间:11月xx日——11月xx日活动主题:感恩豪送暖冬行动活动内容:1、首届会员感恩节:(1)会员特惠区:一、二、三楼分别设立会员特惠区,让拥有尊贵的华联zz会员卡的顾客,充分享受到“高品质、低价位”的服务。
(2)感恩会员,双倍积分返还:11月25日感恩节当天,在指定专厅消费均享受双倍积分返还。
(3)感恩迎新友:活动期间消费无论金额多少均可办理会员卡一张。
(4)会员感恩兑奖日:11月xx日感恩节起,至11月xx日,为会员感恩兑奖日,凡持有阜阳华联xx百货会员卡顾客均可凭卡内积分均可兑奖。
2、美的变频、载誉领航:买美的变频柜机送美的挂机一台,买美的变频还可获得名牌液晶电视!买美的冰箱,价格一步到位。
美的三门超节能冰箱,一步到位1999元,享受12年免费保修。
3、百万好礼相送:羽绒服49元至99元,满百就送、多卖多送、礼品丰厚。
4、感恩“蜂”抢价:各品牌专厅限时限量回馈顾客。
活动氛围营造:1、商场橱窗换成节日新妆,xx日开始进行布置;2、开始进行中厅、迎宾大厅吊灯重新进行更换、布置;3、晚报一期(xx日),1号门右侧做一喷绘,2号门左侧做一喷绘,写真两幅活动细则(分别方在迎宾大厅和三楼摸奖台),会员短信群发,彩虹门布副一条(xx日前)。
客户回馈活动方案篇二为感谢广大客户长期以来对本支行的关心和支持,进一步提升本支行的市场影响力,本支行以感恩之心举办以下营销活动,努力回报客户的信任,致力提升客户价值,和客户共谋发展,分享创造硕果。
一、活动内容(一)开展“xx”主题活动1、活动对象:支行全体存款客户。
2、活动时间:20xx年9月x日—20xx年x月x日。
3、活动规则:活动期间,凡是到支行办理存款业务满xx元的。
客户即可获得一次抽奖资格。
活动期末抽取x名幸运客户,分别赢取价值xx元的x商品。
(二)开展“xx”主题活动1、活动对象:支行全体贷款客户。
附表:建筑安装材料场外运输损耗率表常用建筑材料重量损耗率参考表序号名称规格(㎜)用于部位单位重量(㎏)运输途中损耗(%)场内搬运损耗(%)损耗率(%)一、砖瓦类1 统一砖240×115×53 基础墙块 2.6 0.5 0.5 0。
52 统一砖240×115×53 地面、屋面,空斗墙块 2.6 0。
5 0。
5 1.53 统一砖240×115×53 烟囱、水塔块2。
6 0。
5 1 34 统一砖240×115×53 方砖块2。
6 0。
5 0。
5 3柱5 统一砖240×115×53 圆砖柱块2。
6 0。
5 0。
5 76 统一砖240×115×53 墙体块 2.6 0.5 0.5 0.47 八五砖220×105×43 墙体块1。
76 0。
5 0.5 0。
48 多孔砖(20孔)240×115×90 墙体块3。
45 0.5 0。
5 19 ㎏300×200×115 墙体块7。
3 0。
5 0。
5 110 耐火砖230×115×65 墙体块3。
7 0。
5 0.5 211 麻石砖197×76 地坪块0.5 0.5 212 劈裂墙地砖194×94×11 地坪块0。
57 0。
5 0。
5 2。
513 广场砖100×100×18 地坪100块 36.35 0.5 0。
5 1.514 硅酸盐砌块C型,190 墙体立方米1600 0。
25 0.25 0.515 加气砌块200×300×600 墙体立方米600 1.5 1。
5 416 加气混凝土块200×300×600墙身保温立方米600 1。
5 1.5 217 混凝土空心小型砌块立方米600 1。
产业科技创新 Industrial Technology Innovation42Vol.2 No.4产业科技创新 2020,2(4):42~43Industrial Technology Innovation 三种木质纤维/PVC基木塑复合材料性能比较段国燕1,何春霞2,王 敏1,杨星星1(1东南大学成贤学院 机械与电气工程学院,江苏 南京 210088;2南京农业大学工学院,江苏 南京 210031)摘要:为比较桉木、竹粉和稻壳/PVC复合材料性能,选用桉木、竹粉和稻壳三种木质纤维与PVC制备木塑复合材料,试验和分析他们的拉伸强度、硬度及摩擦磨损性能,结果表明:桉木/PVC复合材料拉伸强度较竹粉/PVC复合材料拉伸强度高出58.89%,较稻壳/PVC复合材料拉伸强度高出77.08%,桉木/PVC复合材料硬度的硬度最高,为65.57HRR,桉木/PVC复合材料摩擦学性能最优。
三种木质纤维/PVC复合材料中,桉木/PVC复合材料具有较好的拉伸性能、耐磨损性及耐热性。
关键词:木质纤维;木塑复合材料;摩擦磨损;力学性能中图分类号:TS653.6 文献标识码:A 文章编号:2096-6164(2020)04-0042-02木塑复合材料符合资源节约型、环境友好型要求,以其高性价比及高适用性广泛应用于各类产品中,代替了实木、塑料等材料的使用,能更好的保护环境、节约资源,木塑复合材料广泛用于栈道、座椅及护栏等,这就要求其具有良好的力学性能和耐磨损性能。
赵娟等人研究表明木质纤维的种类对木塑复合材料力学性能有一定程度影响。
钟鑫等人在研究中提出植物纤维种类影响木塑复合材料性能,以及采取各种物理、化学方法,以及复合材料的成型方法可提高界面相容能力。
赵义平等人研究表明植物纤维的中了及预处理方式提高木塑复合材料界面相容能力。
杨培权研究发现,两摩擦物之间有硬质颗粒或摩擦物表面有硬凸起物造成摩擦过程中材料表面脱落的现象。
为了研究木质纤维对PVC基木塑复合材料摩擦磨损性能的影响,选取桉木、竹粉及稻壳与PVC以1∶1混合并添加钙锌稳定剂、PE蜡、马来接枝聚乙烯,制备试样,对其进行各项性能分析。
附表:建筑安装材料场外运输损耗率表常用建筑材料重量损耗率参考表序号名称规格(㎜) 用于部位单位重量(㎏)运输途中损耗(%)场内搬运损耗(%)损耗率(%)一、砖瓦类1 统一砖240×115×53 基础墙块2。
6 0。
5 0。
5 0。
52 统一砖240×115×53 地面、屋面,空斗墙块2。
6 0。
5 0。
5 1。
53 统一砖240×115×53 烟囱、水塔块2。
6 0。
5 1 34 统一砖240×115×53 方砖块2。
6 0。
5 0。
5 3柱5 统一砖240×115×53 圆砖柱块 2.6 0。
5 0。
5 76 统一砖240×115×53 墙体块2。
6 0。
5 0.5 0.47 八五砖220×105×43 墙体块 1.76 0。
5 0。
5 0.48 多孔砖(20孔)240×115×90 墙体块3。
45 0。
5 0。
5 19 ㎏300×200×115 墙体块7。
3 0。
5 0。
5 110 耐火砖230×115×65 墙体块3。
7 0。
5 0.5 211 麻石砖197×76 地坪块0.5 0。
5 212 劈裂墙地砖194×94×11 地坪块0.57 0。
5 0。
5 2.513 广场砖100×100×18 地坪100块 36。
35 0.5 0.5 1。
514 硅酸盐砌块C型,190 墙体立方米1600 0。
25 0。
25 0.515 加气砌块200×300×600 墙体立方米600 1。
5 1。
5 416 加气混凝土块200×300×600墙身保温立方米600 1。
5 1.5 217 混凝土空心小型砌块立方米600 1。
Mohawk Finishing ProductsDivision of RPM Wood Finishes Group, Inc.Product Data SheetEpoxy Putty StickM743- all colorsProduct Description: The Mohawk Epoxy Stick is a compound that will make a permanent repair and create the reshaping/replacing of wooden parts for general restoration. After a 20 minute cure time (3-6 minutes working time, depending on color) the repaired area is hard enough to be subjected to sanding, drilling, staining and general finishing. Advantages:1.Makes durable and permanent repairs.2.Three to six minute working time.3.No shrinkage.4.Excellent adhesion.Characteristics:Appearance: solid putty, color(s)Shrinkage: <1%Flash point: none observedDry/Cure time: Air dry @ 72° F, 35% relative humidityWorking time: 3-6 minutes (depending on color)Cure time: 20 minutesNon-Volatile Content: 100%VOC’s (coating): 0.0 lbs/gal (0.0 g/l)VOC’s (material): 0.0 lbs/gal (0.0 g/l)Package life: Two years minimum from date of shipment when stored in original, unopened container in a dry area at temperatures below 75°F (24°C)”HMIS: Health – 2, Flammability – 1, Reactivity – 0, Personal Protection – X Specifications:Directions: Surface preparation – For best adhesion sand to roughen surface and to remove any loose paint, dirt or other contaminants. Although dry surfaces are preferred, Epoxy Putty Stick will adhere to damp surfaces.Mixing & Application:1.Trim end and discard. Break/cut off required amount.2.Knead in the hands (see cautions*) or mix with putty knife until a uniform color isachieved. Mix only what can be used in 6 minutes.3.Apply mixed compound within 6 minutes for optimum adhesion and to avoid prematurehardening. Firmly work into the surface.4.Wet fingers with tap water and rub into putty surface for maximum workability. Shapeas desired. Strike off nail holes and the like with wet putty knife.5.May be sanded and stained or painted after material has hardened, within 20 minutes.NOTE: Sanding greatly increases stainability. Sanding is easiest within first few hoursof application.Safety and Other Precautions: Read MSDS for precautions before using product. MSDS:If Material Safety Data Sheet is required, contact:Mohawk Finishing ProductsDivision of RPM Wood Finishes Group, Inc.P.O. Box 22000 Phone: 1-800-545-0047Hickory, NC 28603 Fax: 1-800-721-1545INFORMATION and LIMITED WARRANTY DISCLAIMERTo the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Mohawk Finishing Products to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We assume no responsibility for coverage, performance or injuries resulting from use. The data on this sheet represents estimated and typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. We sell the products without warranty. Users assume all responsibility and liability for use. Loss or damage arising from the use of our products whether used alone or in combination with our products is the responsibility of the user. MOHAWK FINISHING PRODUCTS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. MOHAWK FINISHING PRODUCTS WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTALE DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its purchase price, at our option. The information on this sheet, as well as the products referenced herein, shall be considered “Confidential Information”. Wet samples and uncured samples of these products shall be maintained as confidential and shall not be disclosed to any third party without the prior written permission of Mohawk Finishing Products.。