UR-T DRB TRAY KIT 改造作业手册

东芝服务便携手册——凤e-STUDIO2505/2505H/2505FV4.1中国事业总部服务支持统括部东芝泰格信息系统（深圳）有限公司2014-04目录一、基本清单 (2)（一）基本规格清单 (2)（二）耗材清单 (2)（三）常用电路板及零件清单 (3)（四）选购件清单 (4)（五）PM零件清单 (4)二、错误代码及故障排错参考 (5)（一）卡纸类错误代码 (5)（二）维修请求错误代码 (7)（三）E-MAIL相关错误代码 (10)（四）文件共享相关错误代码 (10)（五）其他错误 (10)三、维修模式列表 (11)四、辅助维修模式（3C） (12)五、SRAM清除模式（6C） (12)六、列表打印模式（9S） (13)七、PM支持模式（6S） (14)（一）操作流程 (14)（二）菜单列表 (14)（三）基本操作过程 (15)八、输入测试模式（03） (16)九、输出测试模式（03） (17)十、打印测试模式（04） (17)十一、05/08代码 (18)（一）常用05调整代码 (18)（二）05模式打印测试图 (21)（三）常用08设置代码 (21)（四）图像尺寸相关调整代码表 (30)（五）图像质量调整代码表（复印相关） (30)（六）图像质量调整代码表（打印相关） (31)（七）图像质量调整代码表（扫描相关）（仅2505H/F） (31)（八）ADF相关调整 (31)十二、传真错误代码及排错参考（仅2505F） (32)（一）传真卡电路相关错误代码（仅2505F） (32)（二）传真发送相关错误代码（仅2505F） (32)（三）传真接收相关错误代码（仅2505F） (34)十三、传真相关的自诊断模式（仅2505F） (36)（一）03测试模式（仅2505F） (36)（二）08设置模式（仅2505F） (36)（三）13传真功能模式（仅2505F） (36)（四）1*传真清除模式（仅2505F） (37)十四、F/W升级 (38)（一）使用USB进行F/W (38)（二）使用PC升级工具进行F/W升级 (39)十五、电路板更换 (40)（一）主板更换步骤 (40)（二）主板的EEPROM更换步骤 (40)附录 (41)（一）电器元件布局图 (41)（二）电器元件符号及功能表 (43)（三）纸路布局图 (44)（四）驱动电器布局图 (44)（五）ADF布局图 (45)（六）交流线束图 (45)（七）直流线束图（2505） (46)（八）直流线束图（2505H/F） (47)一、基本清单（一）基本规格清单注意：随机包装的墨粉容量为2K。

ADJUSTABLE CARGO CARRIERWITH RAMPSOWNER’S MANUALWARNING:Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.Thank you very much for choosing an ULTRA-TOW™ Product! For future reference, please complete the owner’s record below:Model: _______________ Purchase Date: _______________Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.This product is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this product not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use this product until you have first contacted the distributor to determine if it can or should be performed on the product.For technical questions please call 1-800-222-5381.IMPORTANT SAFETY INSTRUCTIONS!Safety Warnings and PrecautionsWARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.Read all instructions before using this product!1. Keep work area clean. Cluttered areas invite injuries.2. Observe work area conditions. Keep work area well lighted.3. Store idle equipment. When not in use, the Cargo Carrier must be stored in a safe and cleanlocation. Always lock up products and keep out of reach of children.4. Use the right product for the job. There are certain applications for which the Cargo Carrier wasdesigned. Do not modify the Cargo Carrier and do not use the Cargo Carrier for a purpose for which it was not intended.5. Check for damaged parts. Before using any product, any part that appears damaged should becarefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately.6. Replacement parts and accessories. When servicing, use only identical replacement parts. Useof any other parts will void the warranty.7. Do not operate product if under the influence of alcohol or drugs. Read warning labels onprescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product.8. Use eye protection. Always wear ANSI-approved impact safety goggles when setting up, loadingand unloading the Cargo Carrier. Wear gloves and avoid sharp edges when assembling and when loading and unloading the Cargo Carrier.9. Do not allow children to play on, stand upon or climb into the Cargo Carrier. The CargoCarrier is not for carrying people or animals.10. Always check hardware and assembled parts after assembling. All connections should be tightand hardware tightened.11. Always distribute objects in the Cargo Carrier evenly. Uneven weight distribution could causetipping.12. Be aware of dynamic loading! Suddenly dropping or bouncing a load on the Cargo Carrier maycreate, for a brief instant, an excess load, which may result in damage to the product and/or personal injury. Additionally, if the vehicle hits a bump, a slight play in the receiving hitch or a movement in the load could result in a momentary dynamic loading effect that could dramatically increase the actual weight load. Check the hitch-to-Carrier connection for any looseness. This momentary dynamic loading effect could result in damage to the Cargo Carrier, the load and possible personal injury.WARNING! Be aware of the possible risk of fire and damage to property resulting from the vehicle’s exhaust system pointing at or running near the cargo put in this Cargo Carrier. Before installing the Cargo Carrier, check to make sure that the exhaust pipe is not pointing in the direction of the cargo. Flammable cargo can ignite from exposure to heat. Other cargo can be damaged from the heat. Always be aware of this potential danger, and never use the Cargo Carrier if the risk exists.13.Follow DOT guidelines for installation and use.14.Do not exceed 55 MPH while carrier is attached.WARNING: The warnings, cautions, and instructions discussed in this instruction manual can not cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.AssemblyIt is important that you read the entire manual to become familiar with the product BEFORE you assemble and use the Cargo Carrier. Before assembling and operating the Cargo Carrier, be sure that you have all parts described in the Parts List and Assembly Diagram located on the last pages of this manual.REFER TO PARTS LISTING PAGE1. Attach the Stop Plate (2) onto the end of Front Platform (5) by using Bolts (1), Washers (3) andLock Nut (4), repeat on Rear Platform (9).2. Attach Front Platform (5) onto the Support Frame (10) by using Bolts (11), Washer (12) and LockNuts (13); attach Rear Platform (9) onto the Support Frame (10) by using Short Pin (14) and R-pin(6). Make sure the two Stop Plates are on the same side and side rails on both platforms are face toface as shown on the Assembly Diagram.3. Attach the Ramp Head (15) onto the Ramp (8) with Bolt (16) and Lock Nut (4), Slide ramp set intothe channel under Front Platform (5) and Rear Platform (9), and secure with Long Pin (7) and R-pin(6).Note: The Ramp set can be assembly in two direction. One is to keep ramp rail upside-A (see figure in next page), another is to keep ramp rail downside-B (see figure in next page). You should always attempt ramp rail upside assembly-A when using, this will make your loading safe and easily by using the ramp rail as a guide. Sometime the mobility you are to load is with very low off ground height less than rail height, under this situation, you must make sure ramp rail downside-B to make ramps workable when loading.nuts are tight.Operation1. Obtain the assistanceof another adult to helplift the Cargo Carrier.2. Lift the Cargo Carrierand place the 2in.S quare Tube End onSupport Frame (10)into the 2in. HitchReceiver mounted toyour vehicle.3.Line up the hole in the2in. S quare Tube Endwith the hole in yourhitch, slide a 5/8in.Hitch Pin (not included)through the holes and insert a Lock Pin (not included) to hold in place.4.Remove the Short Pins (14) and R-pins (6) and adjust to the desired width, then replace the ShortPins (14) and R-pins (6).5. Remove Long Pins (7) and R-pin (6) and pull ramps out from the channel under Front Platform (5)and Rear Platform (9), then hook onto the end of Front Platform (5) and Rear Platform (9).Note: The Ramp set can be used in two direction. One is to keep ramp rail upside, another is tokeep ramp rail downside. You should always attempt ramp rail upside when using, this will make your loading safe and easily by using the ramp rail as a guide. Sometime the mobility you are to load is with very low off ground height less than rail height, under this situation, you must make sure ramp rail downside to make ramps workable when loading. You also must be very careful and slowly when loading to keep mobility wheels on center of the ramps. (see above figure)6. Load equipment onto Carrier using included Ramps.7. Slide Ramps back into storage position and secure with Long Pins (7) and R-pin (6)8. Secure the equipment to Platforms with enough tie-down straps (not provided) beforetransportation.9. Reverse above procedures for unloading equipment.laws.Parts and Assembly DiagramNote:Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.Distributed byNorthern Tool + Equipment Co., Inc.Burnsville, Minnesota 55306-6936Made in CHINA。

TransairØOD (in) ØOD (mm) Length (ft)1013A50 04 2 50 101016A50 04 2 50201013A63 04 2 1/2 63 101016A63 04 2 1/2 63 20Transair ØOD (in) ØOD (mm) Length (ft)TA16 L1 04 3 76 20TA16 L3 04 4101 20TA16 L8 04 6 168 20Blue pipeBlue pipeBlue pipeTransairØOD (in) ØOD (mm) Length (ft) 1013A17 04 00 1/2 16.5 91014A17 04 1/2 16.5 151013A25 04 00 1 25 91016A25 04 00 1 25 201013A40 04 00 1 1/2 40 91016A40 04 00 1 1/2 40 20R i g i d A l u m i n u m P i p eGray pipeGray pipeGray pipeTransairØOD (in) ØOD (mm) Length (ft)1013A17 06 00 1/2 16.5 101016A25 06 00 1 25201016A40 06 00 1 1/2 40 20Transair ØOD (in) ØOD (mm) Length (ft)1016A50 06 2 50 201016A63 06 2 1/2 63 20Transair ØOD (in) ØOD (mm) Length (ft)TA16 L1 06 3 76 20TA16 L3 06 4 101 20R i g i d A l u m i n u m P i p e / F l e x i b l e H o s eGreen pipeGreen pipeGreen pipeTransairØOD (in) ØOD (mm) Length (ft)1014A17 02 1/2 16.5 151016A25 02 00 1 25201016A40 02 00 1 1/2 40 20TransairØOD (in) ØOD (mm) Length (ft)1016A50 06 2 50 201016A63 06 2 1/2 63 20Transair ØOD (in) ØOD (mm) Length (ft)TA16 L1 02 3 76 20TA16 L3 02 4 101 20TransairØOD (in) ØOD (mm) ØID (in) Length (ft)1001E25 00 01 1 1/2 38 7/8 1' 10"1001E25 00 03 1 1/2 38 7/8 5'1001E25 00 04 1 1/2 38 7/8 6' 7"1001E40 00 02 2 1/8 54 1 1/2 3' 3"1001E40 00 04 2 1/8 54 1 1/2 6' 7"1001E40 00 052 1/854 1 1/2 9' 10"TransairØOD (in) ØOD (mm) ØID (in) Length (ft)1001E50 00 09 2 1/2 63 2 3' 3"1001E50 00 04 2 1/2 63 2 6' 6"1001E63 00 08 3 1/8 79 2 1/2 4' 7"1001E63 00 05 3 1/8 79 2 1/2 9' 10"1001E63 00 063 1/879 2 1/2 13' 1"Transair ØOD (in) ØOD (mm) ØID (in) Length (ft)FP01 L1 01 3 9/16 91 3 4' 11"FP L1 02 3 9/16 91 3 6' 6"FP01 L3 02 4 1/2 116 4 6' 6"FP01 L3 034 1/2116 4 9' 10"Flexible hose for compressed air systemsFlexible hose forcompressed air systemsFlexible hose for compressedair systems and vacuum systemsTransair Length (ft) Length (m)6698 99 03 3' 3" 1Anti whip-lash strapP i p e -t o -P i p e a n d T h r e a d e d C o n n e c t o r sPipe-to-pipe connector Pipe-to-pipe connectorwith vent Pipe-to-pipe connector with ventPipe-to-pipe connectorPipe-to-pipe connector(clamp and cartridge)ØOD ØOD Transair (in) (mm)6606 17 00 1/2 16.56606 25 00 1 256606 40 00 1 1/2 40ØOD ØOD Transair (in) (mm)6676 25 00 1 256676 40 00 1 1/2 40ØOD ØOD Transair (in) (mm)6676 50 00 2 506676 63 00 2 1/2 63ØOD ØODTransair (in) (mm)6606 50 00 2 506606 63 00 2 1/2 63ØOD ØOD Transair (in) (mm)RR01 L1 00 3 76RR01 L3 00 4 101RR01 L8 00 6 168ØOD ØOD Transair (in) (mm)RR00 L1 00 3 76RR00 L3 00 4 101Cartridge (spare part)90° elbow90° elbowØOD ØOD Transair (in) (mm) 6602 17 00 1/2 16.5 6602 25 00 125 6602 40 00 1 1/2 40ØOD ØOD Transair (in) (mm) 6602 50 00 2 50 6602 63 00 2 1/263ØOD ØOD Transair (in) (mm) RX02 L1 00 3 76 RX02 L3 00 4101ØOD ØOD Transair (in) (mm) RA02 L8 00 6 168ØOD ØOD NPT Transair (in) (mm) (in) 6609 17 14 1/2 16.5 1/4 6609 17 22 1/2 16.5 1/2 6609 25 22 1 25 1/2 6609 25 28 1 25 3/4 6609 25 35 1 25 1 6609 40 35 1 1/2 40 1 6609 40 43 1 1/2 40 1 1/4 6609 40 50 1 1/2 40 1 1/4 6609 40 44 1 1/2 40 2ØOD ØOD NPT Transair (in) (mm) (in) 6609 50 50 2 50 1 1/2 6609 50 44 2 50 2 6609 63 41 2 1/2 63 2 1/2 6609 63 46 2 1/2 63 390° elbow90° elbowMale 90° elbow, NPT Male 90° elbow, NPTP i p e -t o -P i p e a n d T h r e a d e d C o n n e c t o r s45° elbow 45° elbow45° elbowØOD ØOD Transair (in) (mm)6612 25 00 1 256612 40 00 1 1/2 40ØOD ØOD Transair (in) (mm)6612 50 00 2 506612 63 00 2 1/2 63ØOD ØOD Transair (in) (mm)RR12 L1 00 3 76RR12 L3 00 4 101ØOD ØOD Transair (in) (mm)RA12 L8 00 6 16845° elbowØOD ØOD NPT Transair (in) (mm) (in)6619 25 22 1 25 1/26619 25 28 1 25 3/46619 25 35 1 25 16619 40 35 1 1/2 40 16619 40 43 1 1/2 40 1 1/46619 40 50 1 1/2 40 1 1/26619 40 44 1 1/2 40 2ØOD ØOD NPT Transair (in) (mm) (in)6619 50 50 2 50 1 1/26619 50 44 2 50 26619 63 44 2 1/2 63 2Male 45° elbow,NPT Male 45° elbow,NPTEqual tee Equal teeØOD ØOD Transair (in) (mm) 6604 17 00 1/2 16.5 6604 25 00 125 6604 40 00 1 1/2 40ØOD ØOD Transair (in) (mm) 6604 50 00 2 50 6604 63 00 2 1/263ØOD ØOD Transair (in) (mm) RX04 L1 00 3 76 RX04 L3 00 4101 RX04 L8 00 6168ØOD1 ØOD1 ØOD2 ØOD2Transair (in) (mm) (in) (mm) RX24 L1 40 3 76 1 1/2 40 RX24 L1 50 376 2 50 RX24 L1 63 376 2 1/2 63 RX24 L3 40 4101 1 1/2 40 RX24 L3 63 4101 2 1/2 63 RX04 L3 L1 4101 3 76ØOD1 ØOD1 ØOD2 ØOD2 Transair (in) (mm) (in) (mm) 6604 50 25 2 50 7/8 25 6604 50 40 250 1 1/2 40 6604 63 40 2 1/263 1 1/2 40 6604 63 50 2 1/263 2 1/2 50ØOD1 ØOD1 ØOD2 Transair (in) (mm) (in) 6604 50 25 2 50 1 6604 50 40 2 50 1 1/2 6604 63 40 2 1/2 63 1 1/2 6604 63 50 2 1/2 63 2Equal tee Reducing tee Reducing teeReducing teeP i p e -t o -P i p e a n d T h r e a d e d C o n n e c t o r sThreaded tee Lateral teePlug-in reducerPlug-inreducerØOD ØOD NPT Transair (in) (mm) (in)RX20 L1N04 3 76 1/2RX20 L3N04 4 101 1/2ØOD ØOD Transair (in) (mm)RX05 L1 00 3 76RX05 L3 00 4 101ØOD1 ØOD1 ØOD2 ØOD2 Transair (in) (mm) (in) (mm)6666 17 25 1251/216.56666 25 40 1 1/2 40 7/8 25ØOD1 ØOD1 ØOD2 ØOD2 Transair (in) (mm) (in) (mm)RA66 L8 L3 6 168 4 101RA66 L8 L1 6168376ØOD1 ØOD1 ØOD2 ØOD2 Transair (in) (mm) (in) (mm)6666 40 63 2 1/2 63 1 1/2 406666 40 50 2 501 1/2 406666 50 63 2 1/2 63250ØOD1 ØOD1 ØOD2 ØOD2 Transair (in) (mm) (in) (mm)RX64 L1 50 3 76 250RX64 L1 63 3 762 1/2 63RX64 L3 63 4 101 2 1/2 63RX66 L3 L1 4101 376Plug-in reducer Plug-in reducerVented end cap Vented end capØOD ØOD Transair (in) (mm) 6625 17 00 1/2 16.5 6625 25 00 125 6625 40 00 1 1/2 40ØOD ØOD Transair (in) (mm) 6625 50 00 2 50 6625 63 00 2 1/263ØOD ØOD Transair (in) (mm) RX25 L1 00 3 76 RX25 L3 00 4101ØOD ØOD Transair (in) (mm) RA25 L8 00 6 168ØOD ØOD NPT Transair (in) (mm) (in) 6605 17 14 1/2 16.5 1/4 6605 17 22 1/2 16.5 1/2 6605 25 22 1 25 1/2 6605 25 28 1 25 3/4 6605 25 35 1 25 1 6605 40 35 1 1/2 40 1 6605 40 43 1 1/2 40 1 1/4 6605 40 50 1 1/2 40 1 1/2 6605 40 44 1 1/2 40 2ØOD ØOD NPT Transair (in) (mm) (in) 6605 50 50 2 50 1 1/2 6605 50 44 250 2 6605 63 44 2 1/263 2 6605 63 41 2 1/263 2 1/2 6605 63 46 2 1/263 3End capMale NPT connector End capMale NPT connectorP i p e -t o -P i p e a n d T h r e a d e d C o n n e c t o r sMale NPT connector Male NPT connectorMale NPT stud nutMale NPT adapterØOD ØOD NPT Transair (in) (mm) 6615 25 22 1 25 1/26615 25 28 1 25 3/46615 25 35 1 25 1 6615 40 43 1 1/2 40 1 1/46615 40 50 1 1/2 40 1 1/2ØOD ØOD NPT Transair (in) (mm) (in)6615 50 50 2 50 1 1/26615 50 44 2 50 2ØOD ØOD NPT Transair (in) (mm) (in)RR21 L1N20 3 76 2 1/2RR21 L1N24 3 76 3ØOD ØOD NPT Transair (in) (mm) (in)6611 17 22 1/2 16.5 1/26611 25 22 1 25 1/26611 25 28 1 25 3/46611 25 35 1 25 16611 40 35 1 1/2 40 16611 40 43 1 1/2 40 1 1/46611 40 50 1 1/2 40 1 1/26611 40 44 1 1/2 40 26611 63 44 2 1/2 63 26611 63 41 2 1/2 63 2 1/2ØOD ØOD NPT Transair (in) (mm) (in)6621 17 22 1/2 16.5 1/26611 25 22 1 25 1/26611 25 28 1 25 3/46611 25 35 1 25 16611 40 43 1 1/2 40 1 1/46611 40 50 1 1/2 40 1 1/2Male NPT adapter4 port manifold 6 port manifoldØOD ØOD Transair (in) (mm) 6651 25 12 04 125 6651 40 12 04 1 1/2 40ØOD ØOD Transair (in) (mm) 6653 25 22 06 1 25 6653 40 22 06 1 1/240ØOD ØOD Transair (in) (mm) RX30 L1 00* 3 76 RX31 L1 00** 376 RX30 L3 00* 4 76 RX31 L3 00 4101 RA31 L8 00 6168ØOD ØOD Transair (in) (mm) EW06 00 01 3, 4 76, 101 EW06 00 05 6 168ØOD ØOD Transair (in) (mm) EW05 L1 00 3 76 EW05 L3 00 4 101 EW05 L8 00 6 168Flange* DIN** A NSIFlange bolt kitFlange gasketS i m p l e r e d u c i n g b r a c k e t s / Q u i c k a s s e m b l y b r a c k e t sSimple reducing bracket Simple reducing bracketSimple bracket, NPTSimple bracket, NPTSimple bracket, NPTSimple bracket, NPTØOD ØOD Transair (in) (mm)RA69 25 17 1 25RA69 40 25 1 1/2 40ØOD ØOD Transair (in) (mm)RA69 50 25 2 50ØOD ØOD NPTTransair (in) (mm) (in)RA68 25N04 1 25 1/2RA68 40N04 1 1/2 40 1/2ØOD ØOD Transair (in) (mm)RR63 L1N08 3 76RR63 L3N08 4 101 ØOD ØOD NPT Transair (in) (mm) (in)RA68 50N04 2 50 1/2RA68 50N08 2 50 1/2ØOD ØOD Transair (in) (mm)RR63 L8N12 6 168RR63 L8N16 6 168Quick assembly bracketQuick assembly mini-bracket with female thread,NPTQuick assembly bracket with pre-assembled ball valve, NPT Quick assembly bracket with pre-assembled ball valve, NPTQuick assemblybracketQuick assemblybracketQuick assemblymini-bracketwith femalethread,NPTTransairØOD1 ØOD2 6662 25 17 11/2 6662 25 00 17/8 6662 40 17 1 1/2 1/2 6662 40 25 1 1/2 7/8ØOD ØOD NPT Transair (in) (mm) (in) 6663 25 22 125 1/2 6663 40 22 1 1/2 40 1/2ØOD C NPT Transair (in) (in) (in) 6668 25 22 11/2 1/2 6668 40 22 1 1/2 1/2 1/2ØOD C NPT Transair (in) (in) (in) 6668 50 22 21/2 1/2 6668 63 22 2 1/2 1/2 1/2 6668 63 28 2 1/2 3/4 3/4 TransairØOD1 ØOD2 6662 50 25 2 1 TransairØOD1 ØOD2 6662 50 25 2 1ØOD ØOD Transair (in) (mm) 6663 63 22 2 1/2 63 6663 63 28 2 1/2 63P r e s s u r i z e d s y s t e m o u t l e t s / W a l l b r a c k e t sPressurized system bracket Pressurized system bracketPressurized systembracket Pressurized system drilling tool, BSPPØOD ØOD BSPP Transair (in) (mm) (in)EA98 06 01 1 25 1/2EA98 06 02 1 1/2 40 1/2ØOD ØOD BSPP Transair (in) (mm) (in)EA98 06 04 2 50 1/2ØOD ØOD BSPP Transair (in) (mm) (in)EA98 06 03 2 1/2 63 1/2 ØOD ØOD Transair (in) (mm)EA98 06 00 1/2 16.51 port 45° wall bracket,NPT2 port 90° wall bracket1 port 45° threaded wallbracket, NPT2 port 45° wall bracket,NPT2 port 90° threaded wallbracket, NPT2 port 45° threaded wallbracket, NPTØOD ØOD C Transair (in) (mm) (in)6640 17 22 1 25 1/26640 25 221 1/2 40 1/2ØOD ØOD C Transair (in) (mm) (in)6684 17 22 1/2 16.5 1/26684 25 221 25 1/2C1 C2 Transair (in) (in)6688 22 22 1/2 1/2ØOD ØOD C Transair (in) (mm) (in)6689 17 22 1/2 16.5 1/26689 25 221 25 1/2C1 C2 Transair (in) (in)6642 22 22 1/2 1/2C1 C2 Transair (in) (in)6691 22 22 1/2 1/2CCC C2OD OD OD C1C2C2C1C1W a l l b r a c k e t s / B a l l v a l v e s3 port wall bracket, NPT3 port threaded wall bracket, NPT1 port 45° wall bracket with ball valve, NPT2 port 45° wall bracket with ball valve, NPT2 port 90° wall bracket with ball valve, NPT3 port wall bracket with ball valve, NPTØOD ØOD CTransair (in) (mm) (in)6696 25 22 1 25 1/2C1 C2 Transair (in) (in)6636 28 22 3/4 1/2ØOD ØOD CTransair (in) (mm) (in)6679 17 22 1/2 16.5 1/26679 25 22 1 25 1/2ØOD ØOD C Transair (in) (mm) (in)6694 17 22 1/2 16.5 1/26694 25 22 1 25 1/2ØOD ØOD C Transair (in) (mm) (in)6675 17 22 1/2 16.5 1/26675 25 22 1 25 1/2ØOD ØOD CTransair (in) (mm) (in)6638 25 22 1 25 1/2CC C CCODODODODODC2C1Double female, vented Double female valve Lockable valve, ventedDouble female valveDouble female valve Ball valveØOD ØODTransair (in) (mm)4002 40 00 1 1/2 40 ØOD ØODTransair (in) (mm)4092 50 00* 2 50 ØOD ØODTransair (in) (mm)4002 63 00 2 1/2 634012 63 00* 2 1/2 63 ØOD ØOD Transair (in) (mm)4089 17 00 1/2 16.54089 25 00 1 25 ØOD ØODTransair (in) (mm)4099 17 00 1/2 16.54099 25 00 1 25ØOD ØOD Transair (in) (mm)VR01 L1 00 3 76VR01 L3 00 4 101*lockable*lockableV a l v e s / T o o l sButterfly valve Butterfly valveRemote controlshut-off valveTool casePipe cutterReplacement cutter wheelsPilot kitDrilling jig for rigid aluminum pipeØOD ØOD Transair (in) (mm)VR03 L1 00 3 76ØOD ØOD Transair (in) (mm)VR03 L3 00 4 101VR03 L8 00 6 168ØOD ØOD Transair (in) (mm)4230 40 00 1 1/2 40Transair 4299 03 01Transair 6698 01 03Transair 6698 00 05Transair 6698 03 01 Ø 1/2" - 3"EW08 00 03Ø 4" - 6"TransairEW08 00 99 6698 03 01EW08 00 04EW08 00 03Used for Transair pipe Used for pipe cutterDrilling tool for aluminum pipe Drilling tool for aluminumpipeDrilling tool for aluminum pipeDeburring tool for aluminum pipeChamfer tool for aluminumpipeMarking tool for aluminum pipeØOD ØOD Transair (in) (mm)EW09 00 22 1 22EW09 00 30 1 3/16 30EW09 00 51 2 50EW09 00 64 2 1/2 63Transair 6698 04 02ØOD ØOD Transair (in) (mm)6698 02 02 5/8 16ØOD ØODTransair (in) (mm)6698 02 01 1 22Transair 6698 04 01Transair 6698 04 03Spanner wrenchesTransair 6698 05 03T o o l s / F i x t u r e a c c e s s o r i e sPortable tool kit 14V battery for portabletoolJaws for portable toolFixing clip for rigid pipeFixing clip for rigid pipeFixing clip for rigid pipeTransair EW01 00 02Transair EW03 00 01ØOD ØOD Transair (in) (mm)EW02 L1 00 3 76EW02 L3 00 4 101EW02 L8 00 6 168ØOD ØODTransair (in) (mm)6697 63 01 2 1/2 63ØOD ØODTransair (in) (mm)6697 17 01 1/2 16.56697 25 01 1 256697 40 01 1 1/2 40ØOD ØOD Transair (in) (mm)6697 50 01 2 50Fixing clip for rigid pipeØOD ØOD Transair (in) (mm)ER01 L1 00 3 76ER01 L3 00 4 101ER01 L8 00 6 168Fixing clip for rigid pipeØOD ØOD Transair (in) (mm)EX01 L1 00 3 76EX01 L3 00 4 101SpacerThreaded rod adapterU-channel U-channel fixing bracketTransair 6697 00 03Transair0169 00 05 00Length Transair (ft)6699 01 01 6' 5"Transair 6699 01 02Light series hose reel Light series hose reelLength Transair (ft)6698 11 11 25 LengthTransair (ft)6698 11 12 50ISO B 3/8"ISO B 3/8"ISO B 1/4"ISO B 1/4"ISO B 1/4"C o m p o s i t e a u t o m a t i c s a f e t y c o u p l e r sMale NPTMale NPTMale NPTARO 1/4"ARO 1/4"ISO B 3/8"ARO 1/4"Female NPTFemale NPTFemale NPTCoupler with hosetailCoupler with hosetailCoupler with hosetailC Transair (in)CP05 U1N02 1/4CP05 U1N03 3/8CP05 U1N04 1/2 C Transair (in)CP15 U1N02 1/4CP15 U1N03 3/8CP15 U1N04 1/2 C Transair (in)CP15 U2N02 1/4CP15 U2N03 3/8CP15 U2N04 1/2 C Transair (in)CP15 A1N02 1/4CP15 A1N03 3/8CP15 A1N04 1/2 C Transair (in)CP05 U2N02 1/4CP05 U2N03 3/8CP05 U2N04 1/2ØOD Transair (mm)CP21 U1 08 8CP21 U1 10 10CP21 U1 13 13ØOD Transair (mm)CP21 U2 08 8CP21 U2 10 10CP21 U2 13 13ØOD Transair (mm)CP21 A1 08 8CP21 A1 10 10CP21 A1 13 13C Transair (in)CP05 A1N02 1/4CP05 A1N03 3/8CP05 A1N04 1/2ISO B 3/8"ISO B 3/8"ISO B 1/4"ISO B 1/4"ISO B 1/4"Male Plug NPTMale Plug NPTMale Plug NPTARO 1/4"ARO 1/4"ISO B 3/8"Female Plug NPTFemale Plug NPTFemale Plug NPTPlug with hosetailPlug with hosetailC Transair (in)9084 23 14 1/49084 23 18 3/8 C Transair (in)9083 23 14 1/49083 23 18 3/8C Transair (in)9083 30 14 1/49083 30 18 3/8C Transair (in)9083 22 14 1/4C Transair (in)9084 30 14 1/49084 30 18 3/8 ID Transair (in)9085 23 14 1/49085 23 08 5/169085 23 60 3/8ID Transair (in)9085 30 08 5/169085 30 60 3/89085 30 62 1/2C Transair (in)9084 22 14 1/49084 22 18 3/8ISO B 3/8’’SafetyISO B 1/4’’ARO 1/4’’Pipe-to-pipe connector with temperature sensorTransmitter with current transformerTemperature sensorØOD ØOD Transair (in) (mm)6676 25 00 T 1 256676 40 00 T 1 1/2 406676 50 00 T 2 636676 63 00 T 2 1/2 63Current Transair (amps)SNC-050-2-8MP-KY 50SNC-100-2-8MP-KY 100SNC-150-2-8MP-KY 150SNC-200-2-8MP-KY 200SNC-250-2-8MP-KY 250SNC-300-2-8MP-KY 300SNC-400-2-8MP-KY 400SNC-600-2-8MP-KY 600SNC-800-2-8MP-KY 800TransairSNT-10-2-4FP-KYT r a n s a i r p o w e r e d b y S C O U T ® T e c h n o l o g yPipe-to-pipe connector with pressure sensor Pipe-to-pipe connector with humidity sensorPressure sensorHumidity sensorØOD ØOD Transair (in) (mm)6676 25 00 PT 1 256676 40 00 PT 1 1/2 406676 50 00 PT 2 636676 63 00 PT 2 1/2 63 ØOD ØOD Transair (in) (mm)6676 25 00 HT 1 256676 40 00 HT 1 1/2 406676 50 00 HT 2 636676 63 00 HT 2 1/2 63TransairSNPT-10-2-4FP-KYTransairSNHT-10-2-4FP-KYCollection serverPrimary Receiver NodeTransair SN-CS-1 X XSN-CS-2 X X XSN-CS-3 X X XTransair SNPRN-2Simple reducing bracket with sensorØOD ØOD Transair (in) (mm)RA68 25 FL 1 25RA68 25 FL 1 1/2 40RA68 25 FL 2 50Simple reducing bracket with sensorOptional enclosureSimple reducing bracket with sensorCollection server – mounting kitØOD ØOD Transair (in) (mm)EA98 63 FL2 1/2 63Transair SN-CS-ENØOD ØOD Transair (in) (mm)RR63 L1 FL 3 76RR63 L3 FL 4 100Transair SN-CS-MKEt h e r n e tW i f i C D M A G P R SParker Hannifin CorporationFluid System Connectors Division 7205 E. Hampton Ave.Mesa, AZ 85209phone 480 830 7764fax 480 325 /transairYour complete source for quality tube fittings, hose & hose fittings, brass & composite fittings, quick-disconnect couplings, valves, and assemblytools, locally available from a worldwide network of authorized distributors.Fittings:Available in inch and metric sizes covering SAE, BSP , DIN, GAZ, JIS, and ISO thread configurations, manufactured from steel, stainless steel, brass, aluminum, nylon, and thermoplastic.Hose, Tubing, and Bundles:Available in a wide variety of sizes and materials including rubber, wire-reinforced, thermoplastic, hybrid and custom compounds.Worldwide Availability:Parker operates FluidConnectors manufacturing locations and sales offices throughout North America, South America, Europe, and Asia-Pacific.For information, call toll-free:1-800-C-PARKER (1-800-272-7537)Parker Fluid Connectors GroupNorth American Divisions & Distribution Service CentersNorth American Divisions Fluid System Connectors Division Otsego, MI phone 269 694 9411fax 269 694 4614Hose Products Division Wickliffe, OH phone 440 943 5700fax 440 943 3129Industrial Hose Division Wickliffe, OH phone 440 833 2120fax 440 833 2230Parflex Division Ravenna, OH phone 330 296 2871fax 330 296 8433Quick Coupling Division Minneapolis, MN phone 763 544 7781fax 763 544 3418Tube Fittings Division Columbus, OH phone 614 279 7070fax 614 279 7685Distribution Service Centers Buena Park, CAphone 714 522 8840fax 714 994 1183Conyers, GA phone 770 929 0330fax 770 929 0230Louisville, KY phone 502 937 1322fax 502 937 4180Portland, OR phone 503 283 1020fax 503 283 2201Toledo, OH phone 419 878 7000fax 419 878 7001fax 419 878 7420(FCG KitOperations)CanadaGrimsby, ONT phone 905 945 2274fax 905 945 3945(Contact Grimsby for other Service Center locations.)BUL.3526-TRN 1/17© 2017 Parker Hannifin Corporation。

DRBD安装手册目录1概述 (3)2镜像要求 (3)3准备工作 (3)3.1编译 (3)3.2安装 (3)3.3创建硬件设备drbd (4)3.4DRBD 协议说明 (4)4配置drbd (4)4.1修改/etc/drbd.conf (4)4.2注意：两台机器drbd.conf完全一样 (7)5启动drbd (7)5.1在99服务器执行: (8)5.2在101服务器执行 (8)6设置权限 (8)7drbd测试 (9)7.1写入2个g大文件测试 (9)7.2写入50000个20k的小文件测试 (10)8几点注意的地方 (10)1概述DRBD 是由内核模块和相关脚本而构成，用以构建高可用性的集群。

其实现方式是通过网络来镜像整个设备。

您可以把它看作是一种网络RAID。

Drbd 负责接收数据，把数据写到本地磁盘，然后发送给另一个主机。

另一个主机再将数据存到自己的磁盘中。

源码下载/drbd/0.7/drbd-0.7.19.tar.gz核心参考文档：/drbd-howto.html2镜像要求实现vmware虚拟机192.168.10.99磁盘/dev/sdb1镜像到vmware虚拟机192.168.10.101磁盘/dev/sdb1。

主服务器为192.168.10.99 (dingwy-as4-vmware-nod1)简称为99；备份服务器为192.168.10.101(dingwy-as4-vmware-nod2) 简称为101；平常对数据读写都在99上实现，当99 down掉后可以启动101，实现数据的热备份。

真正的热切换需要才用HA 来实现。

3准备工作安装环境：Red Hat Enterprise Linux AS release 4，内核版本：2.6.9-55.ELsmpdrbd内核源码存在,可到/drbd/去载.下载源码注意：当前最新的drbd-8.0pre3，配置文件无法正常配置，出现一大堆错误，所以下载以前的稳定版本。

Document ID: UM-IT-1581-20171004Index TableModel 1581Installation, Operating and Maintenance InstructionsBlack & Webster Products Division545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204Phone: (517- 787-9444 Fax: (517) 787-7585Email:**********************2009Table of Contents Warranty (3)Table Hook-Up (3)Sequence of Operation (3)Table Adjustments (4)Maintenance (5)Tool Mounting Instructions (5)Parts List........................................................................................................6-8 Dimensions......................................................................................................9-10 Piping Schematic.. (11)Table Motion Lay out (12)Document ID: UM-IT-1581-20171004Revision: AWarrantyAir-Hydraulics, Inc. warrants to the original user that all products manufactured will be free from defects in material and workmanship and will possess the characteristics represented in writing. Claim for breach of the above warranty must be made within a period of one year from date of delivery to the user. Upon satisfactory proof of claim, we will make any necessary repairs or corrections, or at our discretion, replace defective parts at the factory, transportation charges prepaid. Charges for correcting defects will not be allowed, nor can we accept goods returned for correction unless we are notified in writing and the return or correction is authorized by Air-Hydraulics, Inc. in writing. The foregoing is in lieu of all other warranties, expressed or implied, including any warranties that extend beyond the description of the product. This paragraph sets forth the extent of our liability for breach of any warranty in connection with the sale or use of our products. It is understood we will not be liable for consequential damages such as loss of profit, or expense, whether based on tort or contract. This warranty is void if the articles covered by the warranty have not been properly installed, maintained and used.Table Hook-UpAir-Hydraulics Inc. recommends that the air line supplying the table be at least 1/2” pipe or 1/2” ID hose. The maximum pressure is 110 p.s.i. Anything above this could be dangerous to the machine operator and/or other personnel.Refer to the schematic on page when plumbing controls for table hook-up. One 1/2” NPT 2-position, 4-way valve controls the index cylinder and locking cylinder. Care should be taken not to restrict flow to the table.When checking the table to operation after hook-up, make sure the table is held securely (clamped or bolted). The table can shift or jump if left loose on bench.Sequence of Operation1.The directional control valve is shifted by the pilot or solenoid signal. This causes the lockingcylinder to retract, unlocking the table. Note: The signal to the solenoid or pilot must bemaintained until the table top has completed its movement.2.With the locking cylinder clear of the index ring, the index cylinder retracts, moving the index armwhich then turns the table top.3.After the index cylinder is fully retracted, the directional control valve is shifted back which forcesthe locking cylinder forward and locks the table into position. When the locking cylinder locksthe table into place, it pushes the index pawl out of the index ring.4.With the index pawl clear of the index ring, the index cylinder moves forward until it hits the stoprod. With the stop rod adjusted properly, the index pawl is spring actuated into the next slot on the index ring and the index cycle is complete.5.The index table is now ready for the next index cycle.Note: If using a manual operation to shift the directional control valve that controls the index cylinder, insure to hold the valve fully shifted until the table stops moving as a built-in cushion for the index cylinder slows the movement of the table just before the cylinder is fully retracted. If the valve is released too soon, the locking cylinder may not be able to engage the locking ring. If the table is not locked, the table top will return to its original position.Table AdjustmentsAir-Hydraulics, Inc. index tables are built, tested and adjusted at the factory prior to shipment. After receipt of the table, you may find minor adjustments are required to meet your operational requirements.The first adjustment should be in the general speed of the table during the index. To increase the indexing speed of the table, turn the speed control on the index cylinder counter-clockwise & clockwise to decrease. Care must be taken not to set the speed of the table so high that the cushion will not be able to slow the cylinder.The second adjustment is the cushion. Turning the cushion adjustment screw in the clockwise direction increases the amount of cushioning and counter-clockwise decreases the amount of cushioning. The cushion should be set so a visible slowing of the table top occurs just prior to stopping. Do not operate the index table with the cushion not functioning. Possible damage can occur if there is insufficient cushioning of the tabletop.The third adjustment is the override stop. This stop aligns the notch in the index ring with the locking cylinder plunger. If movement in the table is detected when the locking cylinder plunger engages into the index ring, loosen the large jam nut on the override stop-bolt. Make minor changes clockwise or counter-clockwise until the movement is eliminated and then re-tighten the jam nut.Adjustment of the stop-rod should not be necessary as it has been adjusted at the factory. In the event of the table being disassembled for repair or maintenance, it may become necessary to adjust. The stop-rod is used to adjust the point where the index pawl drops into a slot in the index ring and is ready to index the table top. If the stop-rod is inadvertently moved, use the following procedure to readjust the stop-rod. Remove connections for the power source from the index table; loosen the jam nut on the stop-rod until there is approximately 1-1/2” of threads showing. Make sure the table is in position to be locked and then apply power to the back of the locking cylinder. With the signal maintained to the locking cylinder, pressurize the back of the index cylinder and slowly turn the stop-rod in a clockwise direction until the pawl drops into a slot in the ring. If the table is locked up, the stop-rod will not be able to be turned when the pawl drops in the slot. Turn the stop-rod in a counter-clockwise direction ¼ to ½ turns and tighten the jam nut. The index cylinder stroke should be correct, allowing the pawl to drop into a slot every cycle.MaintenanceIn order to extend the life of the table and achieve maximum efficiency, it is recommended that all seals and gaskets be changed on a yearly basis. When changing seals and gaskets it is also recommend that the index pawl and pawl return spring be changed at the same time. After repeated index cycles, the effectiveness of the pawl return spring is lessened.A regular lubrication schedule is recommended to maintain accuracy and reliability in the index table. Grease fittings are supplied and should be greased (1-2 pumps) with a good quality lithium grease on a weekly basis to start. Take care not to over lubricate the table. Excess grease will accumulate inside of the table and will cause internal parts to move slower due to increased friction.It is recommended that at least one complete seal kit be stocked to repair your table. Seals and gaskets are sold in complete sets only.If any problems are encountered with your table, feel free to call Air-Hydraulics, Inc., Jackson, Michigan, and someone in our service department will be glad to assist you. If a comprehensive maintenance program suited for your application is desired, we can also help you set up a program.Instructions for Mounting Tooling to Air-Hydraulics Inc. Indexer1.Mount table to the machine where the drilling, tapping, reaming, etc. is to be done. If the sub-plate has already been installed by the factory, remove it from the index table.2.Connect the power source to the table with the proper valving according to the schematic andinstructions provided.3.Index the table to insure proper operation. The table must be in the locked position prior tomachining.4.Indicate sub-plate mounting holes from the center hole of the table spindle (.750” dia.). Locate thebolt and dowel pin holes from the drawing provided by Air-Hydraulics, Inc.Caution: Holes in the table top must not break through to the table base. A maximum depth of 7/8” is recommended. Use a bottom tap for 3/8-16 UNC tapped holes.5.Install the sub-plate on the table.6.Perform the work required to install tooling, tooling nests, clamps, etc. on the sub-plate at theposition required.7.Index the table and repeat step (#6) until all tooling holes are installed.8.After all holes are drilled, tapped, reamed, etc., install tooling.9.Remove the table from the drilling machine and position on the machine where it is to be used.With the table in the locked position, locate it in the desired location for machine operation.Attach the table to the plate of the machine.Note: Air-Hydraulics, Inc. recommends that the table and fixtures be doweled in place to insure repeatability.Model 1581 Parts Drawing/List1581 Index Table Parts ListNote: When ordering replacement parts for this table, specify Model 1581 and serial number. Air-hydraulics cannot be held responsible for parts shipped in error if the model and serial number are not supplied.Continued on next page.1581 Index Table Parts List – Continued* All O-rings and gaskets and seals are sold collectively as a kit. The part number is: T1581-CS.Model 1581 DimensionsModel 1581 Dimensions ContinuedDocument ID: UM-IT-1581-20171004。

数据种类内容
基板数据包括基板的外形尺寸和BOC 标记的坐标
位置等有关基板整体的数据。

贴片数据包括贴片点的坐标和贴片元件名称等。

元件数据包括元件的尺寸、包装方式等定心时所需的数据
吸取数据包括带状送料器及管状送料器等元件供应位置的数据。

图像数据包括QFP、BGA 等图像识别所需的数据。

注意事项：
3】基板数据
基板数据由
路设置
A 基本设置：
B 尺寸设置：
本设置”中的指定改变显示项目。

C 电路配置：
仅当“基本设置”中已设置“多电路非矩阵”时，方可选择。

4】基本设置
基本设置中有
操作过程中选择符合生产基板的相应的项目。

切换基本设置
排)
切换基板数据
厦门技师学院现代制造工程系编号： REV. 注意事项：
厦门技师学院现代制造工程系编号： REV.
图一
厦门技师学院现代制造工程系编号： REV.
图三
图一
图二
厦门技师学院现代制造工程系编号： REV.
图一图二
图二
厦门技师学院现代制造工程系编号： REV. 厦门技师学院现代制造工程系编号： REV.
厦门技师学院现代制造工程系编号： REV.
（专业文档资料素材和资料部分来自网络，供参考。

可复制、编制，期待你的好评与关注）。

For the latest Parts manuals and other language Operator manuals,visit:/manuals*9016490*9016490Rev.06(01-2020)North America /InternationalModel Part No.:1231845-Machine w/Battery &Charger,Blue Brushes 1235203-Machine w/Battery &Charger,Red Brushes9016402-Machine w/Extra Battery &Charger,Blue Brushes 1232547-Battery ChargerBARef Part No.Serial Number Description Qty.182681(000000-)Bracket Wldt,Lpg Mount1 o263810(000000-)Latch Assy,Lpg Tank Mtg,W/Nut4 Y351839(000000-)Nut Adjustable,Lpg Tank Mtg2 449263(000000-)Tie,Cable3 582556(000000-001039)Bracket,Vaporizer1654930(000000-)Vaporizer,LPG1CDHOW TO ORDER PARTS-See diagram aboveOnly use TENNANT Company supplied or equivalent parts.Parts and supplies may be orderedby phone,by fax or by mail.Follow the steps below to ensure prompt delivery.1.(A)Identify the machine model.2.(B)Identify the machine serial number from the data label.3.(C)Ensure the proper serial number is used fromthe parts list.4.Identify the part number and quantity.Do not order by page or reference numbers.5.Provide your name,company name,customer ID number,billing and shipping address,phone number andpurchase order number.6.Provide detail shipping instructions.Please fill out at time of future reference. Model No.-Serial No.-Machine Options-Sales Rep.-Tennant CompanyPO Box1452Minneapolis,MN55440USAPhone:(800)553-8033Specifications and parts are subject to change without notice. Copyright E2020TENNANT Company,Printed in U.S.A.TABLE OF CONTENTST ennant i-mop XL (01-2020)3STANDARD PARTSGENERAL RECOMMENDED MAINTENANCE ITEMS 5...................................HANDLE ASSEMBLY 6........................HANDLE ASSEMBLY -CONT’D 8..............CONTROL CONSOLE ASSEMBLY 10............CLEAN WATER TANK ASSEMBLY 12............DIRTY WATER TANK ASSEMBLY 14.............SCRUB HEAD ASSEMBLY 16...................BRUSH MOTOR ASSEMBLY 18.................BRUSH DRIVER ASSEMBLY 20.................PAD DRIVER ASSEMBLY 22....................SQUEEGEE ASSEMBLY 24.....................MAIN LEVER ASSEMBLY 26....................BATTERY PACK ASSEMBLY 28.................BATTERY CHARGER ASSEMBLY 30............I-CART TROLLEY ASSEMBLY (OPTION)32.....WALL CHARGERS (OPTION)34................ELECTRICAL DIAGRAM 36.....................TABLE OF CONTENTS4T ennant i-mop XL(05-2017)RECOMMENDED MAINTENANCE ITEMST ennant i-mop XL (03-2019)5GENERAL RECOMMENDED MAINTENANCE ITEMS1232582(300000-)Motor,Brush,Lh 11232669(300000-)Circuitboard,Cntrl11232670(300000-)Circuitboard,Cntrl,Bat11232482(300000-)Valve Assy,Copper,W/Connectors(Includes Fixation Plate and Mounting Screws)11232481(300000-)Connector Assy,Upt,Sigar (Incl Clip and Mount Screw)11232673(300000-)Caster Assy,Sqge31232674(300000-)Fan,Vac (Assembly Complete -Includes Seals)11232675(300000-)Cover,Brush,Motor 11232590(300000-)Hinge Assy,Lever11232698(300000-)Transport Kit,Caster,Rh 11232700(300000-)Transport Kit,Caster,Lh 11232676(300000-)Clip,Retaining,Tank 11232519(300000-)Coupling,Water11232677(300000-)Connector,Hose,Sqge 11232684(300000-)Knob,Cntrl (Silver)11232587(300000-)Hose Assy,Stretch11237769(300000-)Filter,Recovery Tank,Cassette [Xxl](Dirty Tank Filter)11232492(300000-)Filter Assy,Foam Replace By 1237769(See Dirty Water Tank Assembly For New Location)11246484(300000-)Grip,Handle [Set Of 2Xl Imop]1STANDARD PARTST ennant i-mop XL (03-2019)6HANDLE ASSEMBLY355575STANDARD PARTSHANDLE ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)T ennant i-mop XL(03-2019)7STANDARD PARTST ennant i-mop XL (09-2017)8HANDLE ASSEMBLY -CONT’D355581STANDARD PARTST ennant i-mop XL (02-2018)9HANDLE ASSEMBLY -CONT’DRef.Part No.Serial Number Description Qty.∇11232694(300000-)Hinge Kit,Lever1Y 2N/A (300000-)Count Sunk Screw N3.5x13Philips Head 2Y∇ASSEMBLYYINCLUDED IN ASSEMBLYN/A =NOT AVAILABLE SEPARATELY -MUST ORDER ASSEMBLY (∇)STANDARD PARTST ennant i-mop XL (03-2019)10CONTROL CONSOLE ASSEMBLY355584CONTROL CONSOLE ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)CLEAN WATER TANK ASSEMBLY355576CLEAN WATER TANK ASSEMBLYRef.Part No.Serial Number Description Qty.∇11232514(300000-)Tank Assy,Sol[Blue Cap](Standard)1∇11232603(300000-)Tank Assy,Sol[Red Cap](Option)1∇11232605(300000-)Tank Assy,Sol[Yellow Cap](Option)1∇11232606(300000-)Tank Assy,Sol[Green Cap](Option)1 Y2N/A(300000-)Clean Water Compartment1 Y∇31232663(300000-)Cap Kit,Tank,Sol[Blue](Standard)1 Y∇31232665(300000-)Cap Kit,Tank,Sol[Red](Option)1 Y∇31232666(300000-)Cap Kit,Tank,Sol[Yellow](Option)1 Y∇31232667(300000-)Cap Kit,Tank,Sol[Green](Option)1 YY4N/A(300000-)Sleeve Cap Holder Clean Tank1 YY5N/A(300000-)Cap With Hole1 YY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)DIRTY WATER TANK ASSEMBLY355582DIRTY WATER TANK ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)SCRUB HEAD ASSEMBLYSCRUB HEAD ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)BRUSH MOTOR ASSEMBLY355680BRUSH MOTOR ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)BRUSH DRIVER ASSEMBLY355578BRUSH DRIVER ASSEMBLYYY3N/A(300000-)Brush Locker Red(Option)2 YY3N/A(300000-)Brush Locker Yellow(Option)2 YY3N/A(300000-)Brush Locker Green(Option)2 YY4N/A(300000-)Screw Wn545150x14Ejot Delta Pt6∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)PAD DRIVER ASSEMBLYPAD DRIVER ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)SQUEEGEE ASSEMBLYSQUEEGEE ASSEMBLYRef.Part No.Serial Number Description Qty.∇11232588(300000-)Squeege Assy,Scrbr1∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)MAIN LEVER ASSEMBLY355585MAIN LEVER ASSEMBLY∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)BATTERY PACK ASSEMBLY355583BATTERY PACK ASSEMBLYYY3N/A(300000-)Battery Pack Gray[Right]1 YY41232598(300000-)Connector,Bat,Fem,Rh(Color:Gray)1 Y∇51232544(300000-)Battery,Pack,Lh1 YY6N/A(300000-)Battery Pack Blue[Left]1 YY71232545(300000-)Connector,Bat,Fem,Lh(Color:Blue)1∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)BATTERY CHARGER ASSEMBLY355580BATTERY CHARGER ASSEMBLYRef.Part No.Serial Number Description Qty.∇11232547(300000-)Charger,Bat(3pin)1 Y21232564(300000-)Switch,Chrgr1Y∇31232712(300000-)Light,Voltage1 YY4N/A(300000-)Transparent Cover Voltage Display Right1 YY5N/A(300000-)Voltage Display With Percentage2 YY6N/A(300000-)Screw M2x5Cross Head Self Tapping4 YY7N/A(300000-)Transparent Cover Voltage Display Left1 Y∇81232713(300000-)Receptacle Kit,Chrgr1 YY9N/A(300000-)Fuse6.3a1 YY10N/A(300000-)Fuse6.3a Base1 YY11N/A(300000-)Countersunk Screw M3x152 YY12N/A(300000-)Recept Inlet3p+Two Screw Holes Cb3pin1 YY13N/A(300000-)Nut M3Nylon2 Y∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)I-CART TROLLEY ASSEMBLY(OPTION)355671I-CART TROLLEY ASSEMBLY(OPTION)∇ASSEMBLYY INCLUDED IN ASSEMBLYN/A=NOT AVAILABLE SEPARATELY-MUST ORDER ASSEMBLY(∇)WALL CHARGERS(OPTION)355683WALL CHARGERS(OPTION)ELECTRICAL DIAGRAM。