Products Catalog

Tyco Fire & Building Products is a leading manufacturer and distributor of water-based fire suppression systems and components, offering one ofthe broadest lines of fire protection system equipment worldwide.Continually expanding its capabilities through aggressive research and product development, it provides its customers effective fire protection and construction solutions for residential, commercial, industrial, and institutional buildings. Tyco Fire & Building Products serves a diverse group of specifiers, including architects, engineers, contractors, and associated industries with a nationwide network of distribution and manufacturing facilities. Tyco takes pride in the introduction of new and innovative products, technologies and product application extensions.With over 150 years in the industry, Tyco Fire & Building Products is uniquely qualified to provide and developcost effective solutions customized to any building configuration and fire protection application. Our patented solutions provide significant performance advantages with lower installation and maintenance costs.Tyco Fire & Building Products also offers theindustry’s most complete fire protection designsoftware package through its SprinkCAD® programs.TaBle oF ConTenTs AUTOMATIC SprInklerSStandard Spray Sprinklers .................7 – 10 Extended Coverage Sprinklers.............11 – 16 Storage Sprinklers.......................17 – 22 Rapid Response™ Sprinklers ..............23 – 26 Dry Sprinklers .........................27 – 30 Special Purpose Sprinklers................31 – 36 Sprinkler Accessories ....................37 – 38 Nozzles & Nozzle Accessories .............39 – 42 SySTeM VAlVeS & DeVICeSWet System Valves & Devices .............43 – 46 Dry System Valves & Devices..............47 – 50 Deluge & Preaction Systems ..............51 – 56 General Purpose Valves ..................57 – 60 Specialty Items.........................61 – 64 pIpInG & eleCTrICAl prODUCTSGrooved Piping Products.................65 – 68 CPVC Pipe & Fittings....................69 – 70 Electrical Devices.......................71 – 76 SpeCIAlTy SySTeMSFoam Systems..........................77 – 82 Aquamist® Systems .....................83 – 85In 1881, industry pioneer FrederickGrinnell patented the first “sensitive”automatic fire sprinkler incorporating anumber of features still found in modernday units. Since that time, many of themajor advancements in firesprinkler technology canbe attributed to Grinnelland other leading namesin the industry that arenow part of Tyco Fire &Building Products.The history of our companyis one of tremendous growththrough organic developmentand acquisition with over 150 years in the industry,to create a single powerful global resource for owners,and those to whom they turn for engineering advice andsupport. Today our company is proud tobe associated with our corporate andWe stand behind every product we manufacture leading The Way For More Than 150 years T Yco Fire & Building ProducTs Fire ProTecTion general Products catalog TyCO FIre & BUIlDInG prODUCTSThe indusTry leaderBest-in-class solutions start with best-in-class technology,and only Tyco Fire & Building Products offers more ofboth. That’s how we are able to simplify installationand improve the performance of fire protection andmechanical systems, providing the owner with thelowest installed cost. Here are just some of theindustry-leading technologies we have developed:• Storage Fire Protection Solutions such as K-14,K-25 and K-17 ESFR Technology. It was the firstof the ESFR technology, and we pioneered it.• Extended Coverage Ordinary and Light HazardFire Sprinkler Technology• The First Residential Sprinklers for Life SafetyTyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalog• Office Buildings • Banks • Factories • Theaters • Light &Ordinary Hazard OccupanciesA p p l I C A T I O n S:TyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalogPainted, customY3551, TY3531TyCO FIre & BUIlDInG prODUCTSFire ProTecTion general Products catalogatural Brass, chrome10TyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalogTyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalog 11• Office Buildings • Hotels • Hospitals • High-Piled Storage • “Big-Box” RetailingA p p l I C A T I O n S :a g ePolyester, chrome PlatedTyCO FIre & BUIlDInG prODUCTS13Fire ProTecTion general Products catalog1TyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalogright White, chromePainted, Bright White, offTyCO FIre & BUIlDInG prODUCTS1Fire ProTecTion general Products catalogTyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalog 1 s P r i n k l e r s • High-Piled Storage • In-Rack Storage • Warehouse• High Challenge Occupancies A p p l I C A T I O n S :1TyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalogthe frame shadow effects that often produceTyCO FIre & BUIlDInG prODUCTS1Fire ProTecTion general Products catalog20TyCO FIre & BUIlDInG prODUCTS Fire ProTecTion general Products catalogatural Brass, lead coated, atural Brass, lead coated Y3133, TY3231, TY4133,g4/s3 with shieldg4 s1g2Ws-2 shield• Single Family Homes• Apartments • Student • Hotels• Beamed Ceilings• Sloped CeilingsA p p l I C A T I O n S:Always refer to the product’s Technical Data Sheet for a complete description of all Listing and Approval criteria, design parameters, installation instructions, care and maintenance guidelines, and our limited warranty.• Unheated Warehouses• Freezing Conditions • Loading DocksA p p l I C A T I O n S :n k l e r sdesigned for use in applications requiring dryPendent shown" nPT (standard order)hite coated, chromeHsW shown" nPT (standard order)A p p l I C A T I O n S:s P rBack-To-Back ApplicationBack-To-BackHip ApplicationHipSingle DirectionalApplicationBBSingleAREA3WITH APSPRINKLERSApAtticAttic PlusCombustible Concealed sprinkler discharge Patternstandard spray sprinkler discharge Pattern3mm bulb shown3mm bulb shownsignal White, grey White,Always refer to the product’s Technical Data Sheet for a complete description of all Listing and Approval criteria, design parameters, installation instructions, care and maintenance guidelines, and our limited warranty.• Improve Appearance • ConcealClearance Holes• Onsite Emergency Storage Supply • Protection from Mechanical or A p p l I C A T I O n S :i n k l e r a c c e s sstyle 65 style 401style 60• Flammable Liquid Tanks & Operations • Equipment or Processes that Require Special Designs • Cable Trays • Clean Rooms • Computer Rooms• Conveyors • Fuel Storage • Gas Turbines • Historic Sites & Museums • Industrial Process Equipment • Machining Centers • Ferries • Offshore Platforms A p p l I C A T I O n S :c c e s s o r i e sk=1.8 (25,9) k=3.0 (43,2) k=5.6 (80,6) k=1.8 (26,0) k=4.6 (66,2) k=6.0 (86,4)43Fire Protection General Products catalogTyco Fire & Building ProducTs • HeatedWarehouses • Factories • Hospitals • Stores• Apartment or Condominium Complexes • Single Family Residencesa P P l i c a T i o n s :S t e m V a L V e S & DaV-1 alarm ValveButterfly Valve to44Tyco Fire & Building ProducTs Fire Protection General Products catalogTyco Fire & Building ProducTs45Fire Protection General Products catalog46Tyco Fire & Building ProducTs Fire Protection General Products catalog47Fire Protection General Products catalogTyco Fire & Building ProducTs • Unheated Warehouses • Parking Garages • Attic Spaces • Loading Docks, & Other Areas Exposed To Freezinga P P l i c a T i o n s :L V e S & D e V i c e STyco Fire & Building ProducTsFire Protection General Products catalog 48Butterfly Valve to control Water supply dPV-1 dry Pipe Valveair50Tyco Fire & Building ProducTs Fire Protection General Products catalog。

公司产品目录模板英语作文Company Product Catalog Template。

Introduction。

Our company is proud to present our latest product catalog, featuring a wide range of innovative and high-quality products. We specialize in providing solutions for various industries, including healthcare, education, hospitality, and more. Our products are designed to meet the needs of our customers and exceed their expectations. We are committed to delivering the best products and services to our clients, and we are confident that you will find what you are looking for in our catalog.Healthcare Products。

Our healthcare products are designed to improve patient care and enhance the efficiency of healthcare facilities. We offer a range of products, including hospital beds,patient lifts, medical carts, and more. Our products are made from high-quality materials and are designed to meetthe strictest healthcare standards.Education Products。

Frequently used distribution and control products available from distributor stockEATON 2Questions to ask ..................................19Catalog numbering ...............................20General-purpose transformers ..............22Sizing tables .. (24)Pow-R-Stock panelboardsSafety switches/disconnectsTransformersTable of contentsQuestions to ask .....................................5Catalog numbering ..................................6Interiors, EZ Boxes and EZ Trims .............8Branch circuit breakers ............................10Universal main circuit breaker kits—top or bottom mounting ..........................11Lug kits and accessories . (13)Questions to ask ...................................14Catalog numbering ................................15General-duty safety switches ................16Heavy-duty safety switches ..................17Safety switch kits . (18)EATON 3Enclosed controlPushbutton stations and pushbuttonsQuestions to ask .......................................25Catalog numbering ....................................26NEMA non-combination,non-reversing starters, Type 1 ...................26NEMA combination, non-reversingstarters, non-fusible disconnect, Type 1 ....26NEMA accessories .....................................27Lighting contactors (28)Questions to ask .....................................2930 mm pushbutton stations ....................3022 mm pushbutton stations ....................30Individually packaged 30 mmpushbuttons and operators (31)Manual startersQuestions to ask (32)Manual motor switches without overload (33)Single-phase manual starter with overload protection (33)Single- and three-phase manual starters withoverload protection (33)4EATON EATON 5Step 1Select an interior What is your voltage?— 120/240 V single-phase, three-wire — 208Y/120 V three-phase, four-wire — 480Y/277 V three-phase, four-wireWhat is your busbar rating?— 100 A (aluminum or copper)— 225 A (aluminum or copper)— 400 A (aluminum or copper)— 600 A (aluminum or copper)What is the number of branch circuits/poles?— 18— 30— 42Step 2Enclosure typeWhat enclosure is required?— NEMA T 1 indoor — NEMA 3R outdoorStep 3Trim typeFor NEMA 1 indoor panels, will the panel be mounted recessed in the wall or mounted directly to the wall?— Flush — SurfaceStep 4What is the cable entry locations for the incoming feeder?— Top — BottomStep 5Main deviceMain lugs only (MLO) or main circuit breaker?— MLO— MCB (choose amperage and top or bottom)Q A Q A QA QA QA Q A QAPow-R-Stock panelboards(unassembled)Questions to askEATON 6Catalog numbering system— Pow-R-Stock panelboard interiorsCatalog numbering system—EZ Panel factory-assembled stock panelboardsA These items are not part of the initial launch. Please consult VISTA or your Eaton salesengineer for product availability.N Not all combinations may be valid. Please verify availability of catalog otess:number created. Refer to PA014007EN for more information on the EZ Panel.EATON 7EATON 8Pow-R-Stock panelboards—EZ E Boxes and EZ TrimsAmpere rating Max. number of poles CapabilityCatalog numbers Main lugs Main breaker Through- feed lugs Sub-feedbreaker (225 A max.)Interiors(less main device)Aluminum busA S = Short—no TFL or SFB provisions.EATON 9BoxesTrims (NEMA 1)NEMA 3R enclosuresCopper busNEMA 1SurfaceFlushotes:N The colors shown in the tables correspond to the color coding on the trim, interior and box product packaging labels. Be sure that all three parts match when delivering to your customer.otes:N Distributors can purchase boxes in quantities via the Distributor toolbox.EATON 10Branch circuit breakersSummary of branch breakers available No. of AmperekAICPanel A BAB, QBHW, GHQ and GHB breakers installed in PRL1a and PRL2a are available with shunt trip, i.e., BAB1020S.B BAB-H and GHB 50–100 A available as chassis-mounted main device.Universal main circuit breaker kits—top or bottom mountingKits—main circuit breaker (includes circuit breaker and terminals)Max.Ampere Breaker Mounting Wire rangeAI/Cu CatalogA Order optional lug kit catalog no. 3TA225FDK for 175–225 A ED- and FD-Frame three-pole circuit breakers to provide terminations for (1) #6–300 kcmil. otes:N KD kits are to be used on 400 A and 600 A panels only.Universal main circuit breaker kits—top or bottom mountingKits—main circuit breaker (includes circuit breaker and terminals)Max. Ampere Breaker Mounting Wire rangeAI/Cu CatalogLug kits and accessoriesStandard main/sub-feed breaker lug capacitiesMain/through-feed lug kitsKitsCatalog numberA Applicable for use with MLO, SE panels only.B Only applicable for SE PRL1a with chassis-mounted BAB, QBH main breaker.C Only applicable for SE PRL2a with chassis-mounted GHB main breaker.D Main breaker panels only—includes barrier kit and bonding jumper.E To be used with F-frame main breaker.FTo be used with K- and L-frame main breaker.Accessories A Each PRS panel comes with 50% filler plates, e.g., 18 circuit interior contains 9 filler plates.B Series rating kit includes series rating book and adhesive sleeve and series rating sticker.If panelboard is being series rated higher than the base rating, an SRK is required.Step 1Which type of switch do you need?— Heavy-duty (DH)— General-duty (DG)— Double-throw (DT)Step 2What current (ampere) rating do you need?— 30, 60, 100, 200, 400, 600, 800, 1200Step 3Should it be fused, non-fused or fusible with neutral?— F = Fusible without neutral — U = Non-fusible— N = Fusible with neutralStep 4How many poles?— 1, 2, 3, 4, 6Step 5Choose the maximum circuit voltage.— 240 Vac — 600 VacStep 6What type of enclosure do you need?— NEMA 1— NEMA 3R — NEMA 12— NEMA 4 painted steel — NEMA 4X stainless steel — NEMA 4X non-metallicQ A Q A Q A Q A Q A QASafety switches/disconnectsQuestions to askCatalog numbering system—safety switchesGeneral-duty safety switches (disconnects)Two-pole—240 Vac (suitable for service entrance use with a neutral or ground kit)Current rating Enclosure Max. hp ratingsCatalog Single-phaseThree-pole—240 Vac (suitable for service entrance use with a neutral or ground lug kit)Current rating EnclosureMax. hp ratings ACatalogSingle-phaseThree-phaseA Maximum hp ratings for fusible units apply only when dual element time-delay fusesare used.Neutral and ground lug kitsClass R fuse adapter kitsHeavy-duty safety switches (disconnects)Three-pole—480–600 Vac (suitable for service entrance use with a neutral or ground lug kit below)Current ratingEnclosure Max. hp ratingsCatalog Single-phase Three-phaseA For 30 A switches requiring Class J fusing, switch must be ordered with the Class J clipsfrom the factory by adding a suffix “J” on the end.Safety switch kitsNeutral and ground lug kits AA A factory-installed ground lug is supplied on all NEMA 4, 4X and 12 safety switches, as well as all 400 A and higher NEMA 1 and 3R safety switches. A factory-installed ground lug is also supplied on all heavy-duty NEMA 1 and 3R 30–200 A switches that do not have a factory installed neutral.Class R fuse adapter kitsClass J fuse adapter kit AA 30 A switches must be ordered from the factory with Class J fuse provisions by adding suffix “J” at the end of the switch catalog number. 100 A and 200 A switches can be field modified by moving the load side fuse base.Step 1How many phases?— Single-phase — Three-phaseStep 2What type of enclosure is required?— Ventilated — EncapsulatedStep 3What is the primary voltage? (input voltage)— Single-phase is 240 V x 480 V— Three-phase is 480 V delta (three-phase, three-wire)Step 4What is the secondary voltage? (output voltage)— Single-phase — 120/240— Three-phase— 208Y/120 (three-phase, four-wire) or 240 V deltaStep 5What kVA transformer is required?— If single-phase encapsulated, kVAs are: 0.05, 0.075, 0.1, 0.15, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 5, 7.5, 10, 15, 25, 37.5— If single-phase ventilated, kVAs are: 15, 25, 37.5, 50, 75, 100, 167— If three-phase encapsulated, kVAs are: 3, 6, 9, 15, 30, 45, 75— If three-phase ventilated, kVAs are: 15, 30, 45, 75, 112.5, 150, 225, 300Step 6If a ventilated transformer was selected— Field kits: lug kits or weathershields — Select from selection tablesQ A Q A Q A Q A QAQATransformersQuestions to askCatalog numbering system—DOE 2016 ventilated transformersA Typically used with single-phase transformers.Catalog numbering system—encapsulated transformersA Typically used with single-phase transformers.B Single-phase 0.25–2 kVA encapsulated transformers only.General-purpose transformersThree-phase ventilated, 480 delta—208 Y/120, 150 °C rise, aluminum windings, DOE 2016Frame Wiring Typical CatalogA Suitable for use with wall-mounted bracket WMB05.B Suitable for use with wall-mounted bracket WMB04.Three-phase ventilated, 480 delta—240/120 lighting tap,150 °C rise, aluminum windings, DOE 2016Frame Wiring Typical CatalogA Suitable for use with wall-mounted bracket WMB05.B Suitable for use with wall-mounted bracket WMB04.Three-phase encapsulated, 480 delta—208 Y/120, 115 °C riseFrame Wiring CatalogN For frame drawings and wiring diagrams, refer tootes:/transformers.General-purpose transformersSingle-phase ventilated, 240 x 480—120/240, 150 °C rise, aluminum windings, DOE 2016Frame Wiring Typical CatalogA Suitable for use with wall-mounted bracket WMB01.B 480 V primary only.Single-phase encapsulated 240 x 480—120/240, 115 °C riseFrame Wiring Catalogotes:N For frame drawings and wiring diagrams, refer to/transformers.General-purpose transformers sizing tables Three-phase transformer full load currentRated line–line voltageN Line current = (kVA x 1000) / (line voltage x 1.732). otes:Single-phase transformer full load currentRated line–line voltageN Line current = (kVA x 1000) / line voltage.otes:Step 1What type of enclosure do you need?— NEMA 1 (general-duty)— NEMA 3R (rain-tight)— NEMA 12 (dust-tight)— NEMA 4X (wash-down)Step 2What type of starter do you need?— NEMA non-combination— NEMA combination, non-fusible or fusible — NEMA combination, breaker — Lighting contactorStep 3What is the horsepower and voltage of the motor? (Note: this will determine the NEMA starter size)— Horsepower: 1, 5, 10, 25 hp etc.— Motor voltage: 200, 230, 460, 575 VStep 4What is the control voltage for the coil?— 120 Vac — 240 Vac — 480 VacStep 5What size overload relay is needed?— 1–5 FLA — 4–20 FLA — 9–45 FLAStep 6What additional accessories do you need?— Cover control kits, such as HAND/OFF/AUTO selector switch or STOP/START pushbuttons — CPT kits — Fuse kitsQ A Q A Q A Q A Q A QAQuestions to askEnclosed controlCatalog numbering system—non-combination and combination NEMA enclosed startersStartersNEMA non-combination, non-reversing starters, Type 1NEMA Motor Maximum Magnetcoil SSOL CatalogNEMA combination, non-reversing starters, non-fusible disconnect Type 1NEMA Motor Maximum Magnetcoil SSOL CatalogStartersNEMA enclosures with CPT modifications To order an enclosure with CPT :1. Change ECN05 to ECN07 for non-combination units,and ECN16 to ECN18 for combination units.2. Change the “A ” in the 7th catalog string to the correctletter based on the below table:CatalogNEMA accessories—CPT and fuse kitsNEMA accessories—cover control kitsCatalog number Non-combination Type 1, Non-combination Type 1, Combination Type 1 and all Type 3R ,Catalog numbering system—enclosed lighting contactorsLighting contactorsLighting non-combination contactors, Type 1Number Ampere Coil CatalogStep 1Do you need an assembled pushbutton station or loose components in clam-shell packaging?— Assembled pushbutton station— Loose components in clam-shell packageStep 2For pushbutton stationsWhat size of pushbutton station do you need?— 22 mm — 30 mmHow many elements (operators) do you want?— 1— 2— 3Step 3For loose componentsWhat type of operator do you need?— Emergency stop operator — Momentary pushbutton — Indicating light— Illuminated pushbutton — Selector switchesQ A Q A QA QAQuestions to askPushbutton stations and pushbuttonsPushbutton stations30 mm pushbutton stationsDescription Catalog number22 mm pushbutton stationsDescription Catalog numberPushbutton componentsIndividually packaged 30 mm pushbuttons and operators NEMA 4, 4X, 12 13DescriptionCatalognumberEATON 31EATON 32Step 1What is the motor nameplate information?— System (AC or DC) and voltage?— If AC, is the motor single-phase or three-phase?— What is the motor horsepower?Step 2What type of enclosure is needed?— No enclosure (will be mounted in separate enclosure)— NEMA 1 enclosureStep 3Is overload protection required?— No— Yes. If yes, what is the motor full load amperes (FLA)?Step 4What type of operator does the customer want?— Button — ToggleQ A Q A Q A QAQuestions to askManual startersEATON 33Manual startersManual motor switches without overload Pole Maximum motor (hp)Catalog numberSingle-phase manual starters with overload protection— Type MS series starters APole Maximum motor (hp)Catalog number AC voltage A Use MSH heaters for MS series starters.BWith pilot light.Single- and three-phase manual starters with overload protection— Type B100 APole NEMA Maximum motor (hp)Catalog number AC voltage120 208– 480–Pole NEMA Maximum motor (hp)Catalog numberDC voltageA Use FH heaters for Type B100 starters.B NEMA 1.Product contact informationCall 877-ETN-CARE (877-386-2273)Notes: _______________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ 34EATON EATON 35Eaton is a registered trademark. All other trademarks are property of their respective owners. Eaton1000 Eaton Boulevard Cleveland, OH 44122United States © 2018 EatonAll Rights Reserved Printed in USAPublication No. CA08307001E / Z20429February 2018At Eaton, we believe that power is a fundamental part of just about everything people do. Technology, transportation, energy and infrastructure—these are things the world relies on every day. That’s why Eaton is dedicated to helping our customers find new ways to manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. To improve people’s lives, the communities where we live and work, and the planet our future generations depend upon. Because that’s what really matters. And we’re here to make sure it works.See more at /whatmatters*。

Shaoguan Qujiang Lishengde Alloy Steel Co.Ltd.韶关市曲江利胜德合金钢有限公司TEL：86-751-6680688FAX：86-751-6660398URL:Add:PINGTIAN VILLAGE,INDUSTRY AVENUE,MABA TOWN,QUJIANG DISTRICT,SHAOGUAN CITY, GUANGDONG,CHINA.地址：中国广东省韶关市曲江区马坝镇工业大道坪田村IntroductionSituated in Shaoguan,Guangdong Province,China,our company is an expert manufacturer specializing in special steel making(Tool&Die Steel)with a certificate of ISO9001:2000.We have the following equipment:EAF,ESR,Forging equipment,Annealing furnace,Milling machine,and so on.And we produce our steel strictly according to the European standard, especially the German standard.We have exported steels to many foreign countries,like USA, UK,CZ,Cyprus,Brazil,India,Malaysia,Iran,Turkey,Singapore, ect.The quality of the product is still awarded with the customer's endorsement.Hot work Tool Steel1.Hot work Tool Steel Round Round/Flat /Flat bar (H13/1.2344(H13/1.2344/SKD61)/SKD61)High level toughness,good high temperature strength,mainly used in tools for dies,dies inserts,extrusions,hot shearing knives,plastic processing.High w ear resist resistence,ence,toughness and hot hardness.It is mainly used for extrusi extrusing,ng,die-casting mould and complex-shape complex-shaped d mould mould,,etc.Chemical Composition:Grade StandardC Si Mn CrMo V P 、S ≤H13ASTM 0.32-0.450.80-1.200.20-0.50 4.75-5.50 1.10-1.750.80-1.200.0301.2344DIN 0.35-0.420.80-1.200.25-0.50 4.80-5.50 1.20-1.500.85-1.150.03、0.024Cr5MoSiV1GB 0.32-0.420.80-1.200.20-0.50 4.75-5.50 1.10-1.750.80-1.200.030SKD61JIS 0.35-0.420.80-1.200.25-0.50 4.80-5.501.00-1.500.80-1.150.03、0.022.Hot work Tool Steel (1.27141.2714//L6L6/5CrNiMo//5CrNiMo//5CrNiMo/SKT4SKT4SKT4))It is mainly u sed for manufacturing hot-extrusion die ,wage hammers hammers,etc.,etc.Chemical Composition Composition::Grade Standar d C Si Mn Cr Mo NiVP/S ≤L6ASTM 0.65-0.750.10-0.500.25-0.800.60-1.20≤0.50 1.25-2.00/0.0301.2714DIN 0.50-0.600.10-0.400.60-0.900.80-1.200.35-0.55 1.50-1.800.05-0.150.030SKT4JIS0.50-0.600.10-0.400.60-0.900.80-1.200.35-0.55 1.50-1.800.05-0.150.03/0.023.Hot work Tool Steel FDACHigh toughness with red hardness steel.It is widelyused in manufactur manufacturinging hot extrusion mold,the core rod,die hammer's hammer mold,large-scale or complex shape mold.Chemical Composition:Grade Standar d CSiMnCrMoVP ≤S ≤FDACJIS0.38-0.430.90-1.100.38-0.65 4.85-5.40 1.10-1.250.40-0.550.0300.08/0.154.Hot work steel 1.23431.2343//H11H11/SKD6/4Cr5MoSiV/SKD6/4Cr5MoSiVH igh thermal strength,hardness ，wear resistance and toughness.It is mainly used for t ools for extrusion;molds for plastics;tools for cold punching and hot sharing sharing..Chemical Composition:Grade Standar d C Si Mn Cr Mo V P 、S ≤H11ASTM 0.33-0.430.80-1.200.20-0.50 4.75-5.50 1.10-1.600.30-0.600.0301.2343DIN 0.33-0.410.80-1.200.25-0.50 4.80-5.50 1.10-1.500.30-0.500.03、0.024Cr5MoSiV GB 0.33-0.430.80-1.200.20-0.50 4.75-5.50 1.10-1.600.30-0.600.030SKD6JIS0.32-0.420.80-1.20≤0.504.50-5.50 1.00-1.500.30-0.500.03、0.02Cold Work Tool Steel1.1.Cold Cold Work Tool Steel (1.2379/D2/Cr12Mo1V1(1.2379/D2/Cr12Mo1V1/SKD11/SKD11/SKD11))High w ear resist resistence,ence,necessary toughness and high chromium steel.It is mainly used for h igh-output pressing mould,circuit board mould etc.Chemical Composition:Grade Standard C Si Mn Cr Mo V P 、S ≤D2ASTM 1.40-1.600.10-0.600.20-0.6011.0-13.00.70-1.200.50-1.100.0301.2379DIN 1.45-1.600.10-0.600.20-0.6011.0-13.00.70-1.000.70-1.000.030Cr12Mo1V1GB 1.40-1.60≤0.6011.0-13.00.70-1.200.50-1.100.030SKD11JIS1.40-1.60≤0.40≤0.6011.0-13.00.80-1.200.20-0.500.0302.Cold work tool steel (1.2510/(1.2510/O1O1O1/9CrWMn)/9CrWMn)3.High w ear resist resistenceence and n o t liable to be deformed steel.It is maily used for thin pressing mould,edging mould,ornaments empaistic mould mould,,etc.Chemical Composition:Grade Standar d CSiMnCrVWP 、S ≤O1ASTM 0.85-1.000.10-0.50 1.00-1.400.40-0.60≤0.300.40-0.600.0301.2510DIN 0.90-1.050.15-0.35 1.00-1.200.50-0.700.05-0.150.50-0.700.0359CrWMnGB 0.85-0.95≤0.400.90-1.200.50-0.80/0.50-0.800.0303.Cold Work Tool Steel (D3/1.2080/Cr12/SKD1)High wear-resist wear-resistence ence and high Chrome steel steel..It is mainly used for punching tools for thin sheets,profile rolls,knives for paper and plastics,shear knives for thin sheets.Chemical Composition:Grade Standar d C Si Mn Cr W V P 、S ≤D3ASTM 2.00-2.350.10-0.600.20-0.6011.0-13.5≤1.00≤1.000.0301.2080DIN 1.90-2.200.10-0.600.20-0.6011.0-13.0//0.030Cr12GB 2.00-2.30≤0.4011.5-13.0//0.030SKD1JIS1.90-2.200.10-0.600.20-0.6011.0-13.0/≤0.300.0304.Cold work steel O2O2/1.2842/9Mn2V/1.2842/9Mn2V Nice quenching intensity,dimensional stabilityand good wear resistance resistance..It is mainly used for precision instruments,small-sized cold pressing mould,ornaments.Chemical Composition:Grade Standar d CSiMnCrMo V P 、S ≤O2ASTM 0.85-0.95≤0.50 1.40-1.80≤0.50≤0.30≤0.300.0301.2842DIN 0.85-0.950.10-0.40 1.80-2.200.20-0.50/0.05-0.150.0309Mn2VGB0.85-0.95≤0.40 1.70-2.00//0.10-0.250.0305.5.ColdCold Work Tool Steel(1.2436/D6/Cr12W)Very good hardenability,wear resistence.Mainly used in cutting tools,shearingknives,rollers,deep drawing tools,drawingPlastic mold steel1.Plastic mold steel (1.(1.231623162316/3Cr17Mo)/3Cr17Mo)h igh-grade mirror mould in weak acid or moisture environment.It is mainly used for die steel for plasticindustry ，optical instrumen instrument t ,PVS,etc etc..Chemical Composition:Grade Standard C Si Mn Cr Mo Ni P 、S ≤1.2316DIN 0.33-0.45≤1.00≤1.5015.5-17.50.80-1.30≤1.000.0303Cr17MoYB0.28-0.35≤0.80≤1.0016.0-18.00.75-1.25/0.0302.Plastic mould steel (1.2311/(1.2311/P20P20P20/618/3Cr2Mo)/618/3Cr2Mo)O ne of plastic mould steel steels.s.It possess fine polishing property and easy processing.It is mainly used for die diess in plastic industry ，such as various large-sized or medium-sized precision plastic mould and lowmelting point alloy parts parts..Chemical Composition:Grade Standard C Si Mn Cr Mo P 、S ≤P20ASTM 0.28-0.400.20-0.800.60-1.00 1.40-2.000.30-0.550.0301.2311DIN 0.35-0.450.20-0.40 1.30-1.60 1.80-2.100.15-0.250.0353Cr2Mo GB 0.28-0.400.20-0.800.60-1.00 1.40-2.000.30-0.550.030618ASSAB0.28-0.400.20-0.800.60-1.001.40-2.000.30-0.550.0303.Plastic Mould Steel (1.2738/(1.2738/718718718/3Cr2NiMnMo)/3Cr2NiMnMo)Mirror surface p lastic m ould steel.It is mainly u sed for manufacturing oversize and large plastic mould,delicate and long-lifetime mould mould,,ect.Chemical Composition:Grade Standar d C Si Mn Cr Mo Ni P 、S ≤718ASSAB 0.32-0.400.20-0.40 1.10-1.50 1.70-2.000.25-0.400.85-1.150.0301.2738DIN 0.35-0.450.20-0.401.30-1.601.80-2.100.15-0.250.90-1.200.0303Cr2MnNiMoGB0.32-0.400.20-0.40 1.10-1.50 1.70-2.000.25-0.400.85-1.150.0304.Plastic Mould Steel (1.(1.208320832083/S-136/SUS420J2/4Cr13)/S-136/SUS420J2/4Cr13)and h igh-grade mirror mould in weak acid or moisture environment,mainly used for PVC,optical instrument instrument,,etc.Chemical Composition:Grade Standard C Si Mn Cr Mo V P 、S ≤S-136ASSAB 0.35-0.45≤1.00≤0.8012.0-14.0//0.0301.1.20832083DIN 0.36-0.45≤1.00≤1.0012.5-14.5//0.0304Cr13YB 0.35-0.45≤0.60≤0.8012.0-14.0//0.030SUS420J2JIS0.26-0.40≤1.00≤1.0012.00-14.00//0.04、0.03Alloy structural steel1.Alloy structual steel 42CrMo CrMo/4140//4140//4140/SCM440SCM440High quality structural alloy steel steel..It is mainly used for making various kinds of machinery,automobile,mining spare part.Chemical Composition:Grade Standar d C Si Mn Cr Mo P 、S ≤42CrMo GB 0.38-0.450.17-0.370.50-0.800.90-1.200.15-0.250.03542CrMo4NF 0.39-0.460.10-0.400.60-0.900.85-1.150.15-0.300.0304140AISI 0.38-0.430.15-0.350.75-1.000.80-1.100.15-0.250.035、0.0401.7225DIN 0.38-0.45≤0.400.60-0.900.90-1.200.15-0.300.025、0.035SCM440①JIS0.38-0.430.15-0.350.60-0.900.90-1.200.15-0.300.030①Ni ≤0.252.bearing steel 100CrMo7E xcellent hardening penetration and can r eache high hardness values after hardening as well as being characterized by good wear resistance.Mainly used for sectors for rolls of profiling tools,straightenerrolls of continuous cutting lines,small rolls of cold strip strip,,etc.Chemical Composition:Grade Standard C Si Mn CrMo Ni P 、S ≤100CrMo7DIN0.90-1.500.20-0.400.25-0.45 1.65-1.950.15-0.25≤0.300.015High Speed Tool Steel 1.HSS M2/1.3343/SKH51/W6Mo5Cr4V2steel..It isMedium-carbon toughness Cr-base steelmainly used for h eavy load and complex-shape pressingmould,cutting knives etcChemical Composition:。

外贸函电-接受第一篇：外贸函电-接受Dear Sirs,Thank you for your letter of May 12, with which you sent us details of PLASTIC WARE.We have now seen samples of these goods and decided to place an order for 3000 pieces of PLASTIC WARE, provided you can guarantee delivery on or before July 1.Please note that 12 pieces to a box and 100 boxes to a wooden case,2% more or less in weight.We hope that everything will turn out to our entire satisfaction.Yours truly,第二篇：外贸函电——接受Dear Mr.Zhao,We thank you for your emaile and accept your counteroffer of Oct.19th and are pleased to confirm all prices and items.We are now enclosing here with our order NO.NE0911.We are looking forward to more cooperation in the future.Your faithfully.第三篇：外贸函电外贸函电范文范文一：敬启者；我们从阿里巴巴得知贵公司的名称。

我们公司是一个专营纺织品的大规模的公司，在世界市场上享有良好的声誉。

现在，我方公司将会每月为贵公司能提供新的设计。

我方公司将写信与贵公司建立直接的业务关系。

ENGINE MANAGEMENT CATALOGABOUT DENSOAn OE HeritageDENSO is one of the world’s largest automotive component suppliers with over $40.2 billion in annual sales. We supply every major auto manufacturer in the world, providing them with the quality and innovation they need to remain on the leading edge of automotive technology. In addition to our automotive customers, we also supply components to virtually all OE manufacturers worldwide. For decades we have helped all of our customers to become giants in their industries.Unsurpassed QualityAt DENSO we know that one of the major keys to success for our company and our customers is an unwavering commitment to quality. We strive for, and achieve, zero defects for parts manufactured in the millions in DENSO facilities that are ISO9000 and ISO14000 certified. This dedication to quality is clearly recognized by the industry as DENSO has received such prestigious awards as the Deming Award for Quality, the J.D. Power and AssociatesChairman’s Award and numerous supplier awards for quality from companies like Toyota, Lexus, General Motors and Chrysler.Bringing It All To The AftermarketIn the 1980s, DENSO became the first to mass-produce the platinum spark plug and offer it in the aftermarket. A decade later we introduced the world’s most advanced spark plug, Iridium Power®, which revolutionized the concept of the aftermarket performance plug. By the late 1990s, the world watched with great interest as DENSO unveiled a line ofOE-standard premium replacement components under the FirstTime Fit® brand. Today, the First Time Fit line of products includesA/C compressors, cabin air filters, condensers, evaporators, radiators, receiver driers, expansion devices, starters, alternators, oxygen sensors, fuel pumps, oil and air filters, ignition wire sets, tire pressure monitoring system sensors, engine management sensors and wiper blades.Better By DesignAs you can see, we’ve spent decades perfecting our craft — a claim few automotive component manufacturers can make. Clearly the DENSO commitment to quality, innovation, and advanced technology is the reason our automotiveand heavy-duty components truly are better by design.SAFETY PRECAUTIONS•Mixtures of gasoline and air can result in combustion when exposed to an ignition source. Maintain a suitable work environment for gasoline fuel system repairs to reduce the chance for combustion.•Always wear safety goggles.•Avoid skin contact with gasoline.•Always work in a well-ventilated area.•Never perform the fuel pump replacement procedures where fuel vapors may come in contact with an ignition source including static electricity.•Always use OSHA approved gasoline storage containers.•Always use an OSHA approved transfer pump for gasoline.•When performing fuel system repairs, always have a class ABC Multipurpose Dry Chemical fire extinguisher within easy reach at all times.•Do not smoke or work near an open flame or sparks when working on the fuel system.•The fuel system may be under pressure. Opening a fuel system under pressure may allow fuel and fuel vapor to reach a possible ignition source or come in contact with you.•Follow the vehicle manufacturer’s recommended procedures to relieve pressure in the fuel system. Be sure that pressure has been relieved from the delivery side of the fuel system as well as the return side.•Disconnect the negative (-) cable from the battery and position it so it cannot accidentally make contact with the negative (-) battery post during the fuel pump replacement procedure.•It may not be possible to relieve fuel pressure completely. When opening the fuel system, always take precautions to reduce the chance of fuel or fuel vapor reaching a possible ignition source or coming in contact with you.•NOTE: Some vehicles require “Idle Learn Procedure.” The ECM needs to relearn the IAC valve position. Refer to the appropriate workshop manual for the necessary procedures.LIMITED WARRANTY POLICYDENSO Products and Services Americas, Inc. (“DENSO”) warrants to the end user that the DENSO First Time Fit® brand automotive products contained in this catalog and identified below, shall be free of defects in materials and workmanship and will function in accordance with DENSO’s published specifications, under ordinary intended use and service, for a period of twelve (12) months, unlimited miles, after delivery to the end-user. DENSO shall replace any defective Product covered by this warranty. Such remedy shall be the end-user’s sole remedy with respect to any covered defect in the Products.This warranty does not cover defects or malfunctions, which result from causes beyond DENSO’s control, including, without limitation, (i) unusual physical or electrical stress; (ii) accident, neglect, abuse, misuse or other abnormal use; (iii) failure to perform routine maintenance in accordance with specific vehicle manufacturer’s recommended procedures; (iv) normal wear and tear; (v) Product repairs or attempted Product repairs by an unauthorized person; (vi) alterations or modifications to the Product; (vii) improper installation or servicing, (viii)applications for which the product was not intended, (ix) defects or malfunctions caused by other vehicle components or, (x) defects or malfunctions caused by the vehicle itself. This warranty shall extend only to the original end-user and shall be void if any labels or other identifying marks, permanently affixed to Products when shipped from DENSO, are removed, altered, defaced or obliterated.The aforesaid warranty is the only warranty made by DENSO with respect to the Products and is in lieu of all obligations or liabilities on the part of DENSO for damages arising out of or in connection with the sale, useor performance of the Products, including, without limitation, any lost profits or any other consequential, incidental, special or exemplary damages of any kind. DENSO DISCLAIMS ALL OTHER WARRANTIES WITH REGARD TO THE PRODUCTS, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN.This warranty does not cover labor costs incurred in the diagnosis of defect or in the removal or reinstallation of any product, nor does it cover any other contingent expenses such as car rental or towing. A dated proof of purchase receipt may be required to validate any warranty claim. This warranty supersedes any other warranty statement and may also give you specific legal rights which may vary from state to state.DIRECT IGNITION COILDENSO has masterfully designed and built OE components for over 60 years and is the leader in direct ignition coil technology. DENSO developed the world’s first stick coil that employed a cylindrical ignition coil. The stick coil eliminates ignition wires and utilizes wasted space by fitting in the plug hole. Also, a newly developed small-size driving circuit has been integrated into the top of the coil and diagonal windings eliminate sectioned bobbin — reducing the size and weight.Innovator for Stick Coil TechnologyAs the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality of DENSO’s stick coil. Inferior aftermarket replacement coils do not meet the strict DENSO standards for reliability and durability, which cost time and money for warranty returns. So don’t be fooled by imitations — look for the DENSO name to be sure you’re getting the best.Feature & Benefits•Compact design•High temperature reliability•Superior materials create quality coils•Integrated igniter eliminates high tension wiring •Unsurpassed durability•Outstanding RFI noise suppression•OE Product adapted for the Aftermarket2.DENSO uses diagonal windings to eliminatesectioned bobbin reducing size and weight.4.DENSO has conducted superior testing and inspection processes to ensure the highest quality.DIRECT IGNITION COILDENSO tested many aftermarket ignition coils and found that none of them meet DENSO’s high standards for reliability and durability. Many aftermarket ignition coils can output the correct voltage but do not perform for the long haul. The difference comes with prolonged exposure to extreme temperature variations seen under the hoods of today’s cars and trucks.Constant improvements in weight reduction, emission standards and fuel efficiency all contribute to increased demands on our vehicles engines. DENSO ignition coils are OE grade or better and are built to give you the performance and durability needed in today’s vehicles. When the job needs to be done right the first time – you can rely on DENSO ignition coils.IMITATORS IGNITION COILSDURABILITY TEST RESULTS Application: Toyota Camry Stick CoilDURABILITY TEST RESULTSApplication: Ford Crown Victoria Coil-on-PlugIGNITION WIRE SETDENSO First Time Fit® ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceed OE/OES standards.All-silicone wiresThe 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40º to 428º F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.Pre-cut to exact lengths Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box.Identical OE end capsDesigned to “click” into place for easy installation and a secure fit. This allows the installer to “feel and hear” that a solid connection has been made, even when the connection is in a difficult-to-see location.Strong connectionsThrough a patented process, the terminals are attached to provide an extremely strong connection ensuring the cable and boot will not separate during removal and installation.1. C arbon impregnated fiberglass core for superior conductivity.2. F iberglass braid for maximum strength.3. C onductive silicon layer for hightemperature performance and EMI/RFI noise suppression.4. S ilicone insulation for superior dielectric and heat performance.5. R einforcing member for added strength and terminal retention.6. H igh temperature “Class E” silicone jacket to withstand heat, cold, chemicals and moisture.7. C ore reinforced with KEVLAR®.8.Ferrite impregnated layer.9. W ire-wound layer to suppressEMI/RFI noise.378945621FUEL INJECTORSAs a leading OE supplier, DENSO’s advancedfuel injector technology provides the highestdynamic range and the smallest dropletsize. Built with all-new components used inOE production, DENSO gives you the bestinjector for the vehicle. DENSO fuel injectorsdo away with clogged nozzles, worn internalparts and faulty electrical components left bya rebuilt injector.Application Coverage•Part Numbers: 62•Makes: Acura, Ford, Honda, Hyundai,Infiniti, Jeep, Kia, Lexus, Lincoln, Mazda,Mercury, Mitsubishi, Nissan, Scion,Subaru, Suzuki and Toyota•Over 34% coverage of Toyota/Lexusapplications with just 15 part numbers.Features & Benefits•Smooth engine operation– improves gasmileage and produces fewer emissions.•Versatile dynamic range and droplet size:Droplet size – the smaller the particle,the easier the fuel is to ignite providinga cleaner more fuel efficient burn in thecombustion chamber.Dynamic range – the wider the dynamicrange, the more versatile the injectorcan be providing the fuel demand forhigh output engines and stable idle.The DENSO Difference•First Time Fit philosophy.•OE technology adapted for theaftermarket.•Brand name synonymous with quality.•Lowest return rate in the industry.ENGINE MANAGEMENT SENSORSIn an effort to reduce emissions, in the late ‘90s, manufacturers started addingsensors to engines to monitor various functions and emissions. DENSO was oneof the first companies to produce these sensors, and still today, continues tobring new technology to the industry.Mass Air Flow SensorsThe Mass Air Flow Sensor detects the amount of air drawn into the engine.•DENSO created the world’s first plug-in mass air flow sensor in 1996 – thissensor was inserted into the air intake pipe, which was smaller, lighter andeasier to mount than previous sensors.•In 1997, DENSO introduced a new sensing element air bypass structure –this reduced the exposure of the sensing unit to contaminants for higherreliability and improved detection accuracy.•Today, DENSO’s fine platinum wire sensing element is coated with aglass film to further protect it from contaminants, resulting in the highestreliability.Count on DENSO Mass Air Flow Sensors to deliver the highest reliability,durability and precision in real world driving conditions.Camshaft / Crankshaft Position SensorsCamshaft and Crankshaft Position Sensors detect camshaft and crankshaftrotation during one engine-combustion cycle. DENSO produces both MagneticResistant Element (MRE) type and Magnetic Pick-Up (MPU) type sensors.•DENSO MRE sensors have a pair of MREs on an Integrated Circuit (IC) chip–this unique design is extremely accurate, even just after an engine isstarted.•The molded IC chip is installed inside a cylindrical magnet so it ispositioned closer to the gears that rotate with the cam or crank shaft – thisdesign is almost 10 times more sensitive than Hall element type sensors.•DENSO uses a Polyphenylene Sulfide resin coating over the molded ICchip and cylindrical magnet for greater strength and superior resistance tosubstances like fuel, engine oil and emission byproducts.ENGINE MANAGEMENT SENSORSCoolant Temperature SensorsThe Coolant Temperature Sensor detects the temperature of the engine coolant.This sensor is located on the engine or in one of the coolant passages in thecylinder head.•It senses changes in coolant temperature, which gives the ECU vitalinformation to help control fuel injection, ignition timing and transmissionshifting.•A failing sensor can cause the engine to run rich or lean, cause thetransmission to shift incorrectly, or cause the Check Engine Light toilluminate.At DENSO, we’re committed to being the innovator to help reduceemissions while improving performance.Manifold Absolute Pressure Sensors•The manifold absolute pressure sensor measures the pressure of the intakemanifold.•Most engines use MAF or MAP but some engines use both to help loweremissions.•DENSO MAP senosrs offer leading edge sensing technology.•Made from superior materials, which controls fuel injection more precisely.RELAYSDENSO’s First Time Fit relays are no different from the OE relays DENSOhas manufactured for over 60 years — built to be quiet, efficient andreliable. Designed and manufactured to outlast the closest competitorby a minimum of ten times more life cycles, DENSO’s First Time Fit Relayswill most likely out last your car.EfficiencyDENSO’s First Time Fit relays are built to be efficient and produice little tono h eat. The high magnetic efficiency coil reduces heat generated fromthe relay extending the life. Designed with the shortest current path,power consumption is nonexistent.Premium DesignEngineered with a non-solder process, DENSO’s First Time Fit relaysare more resistant to heat-shock, and arcing. The precision controlledcontact force and self-adjusting air gap increase longevity of the internalparts and ensures consistent relay performance to nearly half a millioncycles.Features & Benefits•Controlled contact force•Automatically adjust gap for precise contact•Low-heat generation•Non-Soldered increases heat resistance•Shortest distance for electrical current to travelThe Denso Difference•First Time Fit philosophy•OE technology adapted for the aftermarket•Brand name synonymous with quality•Lowest return rates in the industryDiscover other ignition parts on our website.。

Performance Chemicals Adding value to metal surfacesChemicals forMetal Surface TreatmentBasotronic ®Golpanol ®.Lugalvan ® Lutron ®.Lutropur®®Lut2BASF is the leading supplier of performance chemicals used in formulations for metal surface mon applications of BASF products are:Electroplating withZn,Sn,Ni,Cu,Cr,Ag,and Alloys Electroless Plating withCu,Ni,Sn and Precious Metals Passivations and Finishes Pre- and Post-treatment Printed Circuit BoardManufacturing and Soldering Electromagnetic Shielding Capacitor and Battery ManufacturingPerformance Chemicals for Metal Surface TreatmentChemicals for the Surface Treatment of MetalsBASF products are involved in all processes:Pre-treatment, metal or conductive polymer deposition and post-treatment.The dedicated product lines for metal surface technology are:Basotronic ®Grades Auxiliaries for manufacturing of printed circuit board Golpanol ®Grades Brightener components for galvanic nickel bathsLugalvan ®GradesBrightener components for galvanic baths: Zinc, tin, copper,and other metals including alloys as well as passivations and finishesLutron ™ GradesFunctional fluids for reflow and hot air leveling in printed circuit board manufacturing, heat-transfer fluidsLutropur ®GradesChelates and high-purity bulk chemicals for plating bathsOther product lines with major importance in metal treatment are:Trilon ®GradesChelating agents useful for alloy plating, precious metal plating, and cleaningKorantin ®Grades Corrosioninhibitors To find out the wide variety of BASF surfactants usedin all areas of metal treatment and printed circuit board manufacturing, please refer to the relevant BASFsurfactants brochures and booklets as well as internet homepage/detergents-formulators ® = R e g i s t e r e d t r a d e m a r k o f B A S F A k t i e n g e s e l l s c h a f t · T M = T r a d e m a r k o f B A S F A k t i e n g e s e l l s c h a f t® Lutropur®3Cleaning and PretreatmentProcess Chemicals BASF Prod u ctBuffing PolishingWaxes,EmulsifiersEmulan ®,Tamol ®,Sokalan ®Grades Pickling Corrosion Inhibitors Korantin ®BH,Golpanol ®GradesCleaning,Degreasing Surfactants,Emulsifiers,Chelating Agents,Lutensol ®,Lutensit ®,Plurafac ®,Dispersing Agents,Corrosion Inhibitors Emulan ®,Trilon ®,Sokalan ®,Tamol ®,Korantin ®Grades Derusting Corrosion Inhibitors,Surfactants,Korantin ®BH,Lutensol ®,Lutensit ®,Chelating Agents,Dispersing Agents Trilon ®,Sokalan ®GradesStripping of Coatings Solvents,Surfactants,Dispersing Agents,Korantin ®BH,Lutensol ®,Plurafac ®,Chelating AgentsPluriol ®,Tamol ®,Trilon ®GradesStripping of Plated MetalOxidizing Agents,Accelerators,AcidsGolpanol ®MBS Granules N*,Lugalvan ®TC-MTC*,Lutropur ®MSAElectroplatingProcess Chemicals BASF Prod u ctElectrolytic Metal Deposition:Acetylenes,Pyridine Derivatives,Thio Compounds,Golpanol ®,Lugalvan ®,Lutensol ®,Nickel,Zinc and Zinc Alloys,Unsaturated Alkysulfonates,Methanesulfonic Acid,Lutensit ®,Trilon ®,Lutropur ®,Copper,Chromium,Aromatic Carbonyl Compounds,Surfactants,Emulan ®,Pluronic ®,Tamol ®,Sokalan ®,Tin and Tin AlloysEmulsifiers,Dispersing Agents,Chelating Agents,Pluriol ®E GradesPolyalkyleneglycols,EO/PO Blockpolymers,etcElectroless Plating:Chelating Agents,Reducing Agents,Trilon ®,Lutropur ®,Basotronic ®,Copper,Nickel,Tin Surface Conditioners,Surfactants,Basic Acids Lutensol ®Grades,Sokalan ®DCS Precious Metals Chelating Agents Trilon ® Grades Chemical Polishing Acetylenes Golpanol ®Grades (Stainless Steel)Aluminum AnodizingAcetylenesGolpanol ®HDPhosphatizing O xidizing Agents Golpanol ®MBS Granules N*Organic Top Coats,Waxes,Styrene/Acrylate CopolymersLugalvan ®GradesDip or Spray Applied Post-treatmentProcess Chemicals BASF Prod u ctPassivating O xidizing Agents Golpanol ®MBS Granules N*Drying Cationic Surfactants Lutensit ®TC-KLC 50*Sealing Aluminium Dispersing Agents Tamol ®NN Grades Passivations and FinishesCopolymersLugalvan ®GradesProcess for Printed Circuit Board Manufacturing Process ChemicalsBASF Prod u ctPretreatment Emulsifiers,Surfactants,Corrosion Inhibitors,Lutensol ®,Lutensit ®,Trilon ®,Lutropur ®,Dispersants,Chelating Agents,Defoamers,Emulan ®,Pluronic ®,Tamol ®,Sokalan ®,Deoxidizing Agents Pluriol ®E Grades Through-Hole PlatingCationic Polymers,Conductive Polymers,Basotronic ®,Lutropur ®,Trilon ®Grades Reducing Agents,ChelatesImaging Defoamers,Surfactants Lutensol ®,Lutensit ®,Emulan ®,Pluronic ®Grades ElectroplatingSee aboveSee above Reflow Soldering,Hot Air Leveling EthoxylatesLutron™ Grades* Distributed by BTC Speciality Chemical Distribution GmbH, Cologne/GermanyApplicationsLugalvan ®LutNickel PlatingProductsProd ct Chemicals Nat u re F u nction Golpanol ®ALS Sodium Allyl SulphonateBasic Brightener Golpanol ®ALS 35Golpanol ®ATPNCarboxyethylisothiuronium BetaineBasic Brightener Golpanol ®BE O 2-Butyne-1,4-DiolethoxylateTop Brightener Golpanol ®BMP 2-Butyne-1,4-Diolpropoxylate Top Brightener Golpanol ®BOZ cryst.2-Butyne-1,4-DiolTop BrightenerGolpanol ®DEP N,N-Diethyl-2-Propyne-1-Amine Top Brightener Golpanol ®HD 3-Hexyne-2,5-Diol BrightenerGolpanol ®MBS Granules.N*Sodium Nitrobenzene SulphonateStripping Agent for Plated MetalGolpanol ®MPA 1,1-Dimethyl-2-Propyyne-1-Amine Top Brightener Golpanol ®PA Propargyl Alcohol Top Brightener Golpanol ®PAP Propargyl Alcohol Propoxylate Top Brightener Golpanol ®PME Propargyl Alcohol Ethoxylate Top Brightener Golpanol ®PS Sodium Propargyl SulphonateBasic and Top Brightener Golpanol ®TC-PHP* 1-(2-Hydroxy-3-Sulfopropyl) Pyridinium Betaine Top Brightener Golpanol ®VSSodium Vinyl SulphonateBasic Brightener4Zinc, Tin, Copper Platingu nctionu re FNatProd ct ChemicalsLugalvan®ANA 4-Methoxybenzaldehyde Top Brightener Alkaline ZincLugalvan®BNO 12 ␤-Naphthol Ethoxylate Basic Brightener Acidic ZincLugalvan®BNO 24 ␤-Naphthol Ethoxylate Basic Brightener Acidic ZincLugalvan®BPC 48 Benzylpyridinium-3-Carboxylate Top Brightener Alkaline ZincLugalvan®DC Aqueous Dispersion of an Ethylene Copolymer Protective CoatingLugalvan®EDC Modified Epoxy Resin in Water Protective CoatingLugalvan®FDC Aqueous Dispersion of an Ethylene Copolymer Protective CoatingLugalvan®EH 158 Ethylhexanol Ethoxylate Basic Brightener Acidic Zinc,TinLugalvan®G 15000 Polyethylenimine Basic Brightener AlkalineHigh Molecular Weight+ Acidic Zinc,Tin,CopperLugalvan®G 20 Polyethylenimine Basic Brightener AlkalineLow Molecular Weight + Acidic Zinc,Tin,CopperLugalvan®G 35 Polyethylenimine Basic Brightener AlkalineLow Molecular Weight + Acidic Zinc,Tin,CopperLugalvan®HS 1000 Thiodiglycol Ethoxylate Basic Brightener Acidic Zinc,TinLugalvan®IMZ Imidazole Top Brightener Alkaline ZincLugalvan®IZE Reaction Product of Imidazole and Epichlorohydrin Top Brightener Alkaline ZincLugalvan®NES Sulfonated and Sulfated Alkylphenol Ethoxylate Basic Brightener Acidic Zinc,TinLugalvan®TC-BAR* Benzylidene Acetone Top Brightener Acidic ZincAcidicZincO CB* 2-Chlorobenzaldehyde TopLugalvan®TC-BrightenerLutropur®MSA Methanesulfonic Acid Base Component for ElectrolytesLutropur®MSA 100and Metal Surface TreatmentLutropur®MSA UP Methanesulfonic Acid Metal Surface Treatment for Electronic Manufacturing Electroless Platingu re Fu nctionNatProd ct ChemicalsBasotronic®PVI Quaternized Polyvinylimidazole Through-Hole Plating,Conditioner,Brightener Acid CopperBasotronic®PYR Pyrrole (electronic grade) Through-Hole Plating,Conditioner,Capacitor Production,High Surface Area Electrodes Lutropur®FEG 28 Formaldehyde (electronic grade) Electroless Copper,Through-Hole PlatingLutropur®Q 75 N,N,N´,N´-Tetrakis-(2-Hydroxypropyl) Chelating Agents,Zinc,Electroless Copper,PlatingLutropur®Q Ethylenediamine Through-HoleSolderingu re Fu nctionNatProd ct ChemicalsLutron™ HF 1 Modified Polyglycol Ether Basic Brightener Acid Zinc,Brightener Copper,Flux,Heat Transfer FluidLutron™ HF 3 Modified Polyglycol Ether Basic Brightener Zinc,Flux,Heat Transfer FluidLutron™ HF 8 Mixture of Various Alkoxylates,Stabilized FluxLutron™ KS 1 Modified Polyglycol Ether Basic Brightener Zinc,Flux,Heat Transfer FluidLutron™ WF 20 D Modified Polyglycol Ether Flux® Lutropur®5 Lutron™ WF 21 D Modified Polyglycol Ether,Stabilized Flux* Distributed by BTC Speciality Chemical Distribution GmbH, Cologne/GermanyAlloy PlatingCopper/Zinc (Brass) Golpanol®BEO and BMP as well as Pluriol®E grades areused as brighteners and crystal-growth inhibitors. Lutropur®Q 75 is used as a chelate to partly replace cyanide. Besidesthese products Lugalvan®alkaline brighteners should beapplied.Nickel/Iron Essentially, the Golpanol®brighteners should be appliedfor this type of alloy plating. Golpanol®PS and ATPN areparticularly useful.Tin/Lead and Leadfree Electrolytes based on Lutropur®MSA results in smoothTin Alloys deposits. Besides this basic acid, Lugalvan®tin brightenerscan be used.Zinc Alloys with Iron,Lugalvan®zinc brightener systems (acid or alkaline), shouldNickel and Cobalt be applied for these processes.Pre- and Post-treatmentPickling, Stainless Steel Combined with acids, Golpanol®BOZ, BMP1), BEO1), PME1)and PAP1)as well as Korantin®BH are used as inhibitors.Their use results in a smooth steel surface with enhancedcorrosion resistance.1) not classified as toxic.Anodizing Golpanol®HD in sulfuric baths is used as an inhibitor.The use of Lutropur®MSA allows color anodizing with agolden shade.Sealing of the aluminum oxide layer can be achieved incombination with cobalt or nickel acetate, Tamol®NN 8906or NN 9401 and Lutensit®TC-KLC 50*.Passivation Lugalvan®Passivation Products are used to make organicconversion layers. They render corrosion protection andpaint adhesion.Finishes Lugalvan®FDC can be used in dip applications and exhibitssuperior corrosion inhibition. It may be used on steel, zinc,aluminum or brass. The use on brass requires the additionof minor amounts of corrosion inhibitors.Lugalvan®FDC may be formulated with corrosion inhibitors,pigments and dyes Lugalvan®EDC is used to formulatecathodic electrodeposition coatings. It is generally appliedto metallised surfaces in the form of a clear or pigmentedcoating.Stripping Lutropur®MSA as acid, Lutensit®TC-KLC 50* as Inhibitor,Golpanol®MBS Granules. N*.Photoresist Stripping Pluronic®RPE 3110 and Plurafac®grades as defoamers,Lutron™ HF 1 as solubilizer.* Distributed by BTC Speciality Chemical Distribution GmbH, Cologne/Germany67®Lutropur®Products for the application of electroless copper plating in the manufacturing of printed circuit boards are listed here.Prod ct Chemicals Nat u re F u nction Lutensol ®Grades Nonionic Surfactants Cleaning,Degreasing Lutensit ®Grades Ionic Surfactants Cleaning,DegreasingPlurafac ®GradesFatty Alcohol AlkoxylatesCleaning,Degreasing,Defoaming Pluronic ®Grades E O /P O Blockpolymers DefoamingTrilon ®Grades AminocarboxylatesChelating Agents Basotronic ®PVI Quaternized Polyvinylimidazole ConditioningBasotronic ®PYR Pyrrole (electronic grade) Generation of Conductive Polymer Layer Lutropur ®FEG 28Formaldehyde (electronic grade)Reducing Agent Lutropur ®Q 75 N,N,N´,N´-Tetrakis-(2-Hydroxypropyl)-Chelating AgentLutropur ®Q EthylenediamineMethanesulfonic AcidLutropur ®MSA, methanesulfonicacid, is being used in a variety of applications due to its unique purity and because of the high solubility of its salts. Further purification is not necessary with Lutropur ®MSA.Methanesulfonic acid is not an oxidizing agent and thus differs from sulfuric acid and nitric acid.Lutropur ®MSA is particularly useful for the following techniques:Continuous tin and tin alloy plating on substrates like strip steel, steel wire and copper. Lutropur ®MSA can be used advantageously to replace tetrafluoroboric acid, phenolsulfonic acid and sulfuric acid due to the high solubility of its salts. Lutropur ®MSA has a lower carbon (TOC) content than other organic acids and thus allows easier wastewater handling.Stripping and Metal Refining Pickling and Electro polishing Ion Exchanger Recycling Acid CleanersLutropur ®MSAReadily biodegradable Low TOCStrong organicacidNon-oxidizingEasy to handleRecyclableHigh thermal stabilityLutropur ®MSAColorless Free of chlorineOdorlessHeavy metals < 1 ppmOxidizable components < 1 ppmSulfate < 50 ppmElectroless Copper Plating,Printed Circuit BoardE V D 0111 e 10.2005The following products may be used for waste water treatment in the electroplating and metal working industry.* Distributed by BTC Speciality Chemical Distribution GmbH, Cologne/GermanyQuality ManagementThe Operating Division Performance Chemicals has implemented and maintains a Quality ManagementSystem which fulfills the requirements of the standard DIN EN ISO 9001:2000.BASF – A reliable supplierThe high degree of backward integra-tion of the BASF production process ensures a reliable source of supply.BASF’s worldwide presence with a network of production and distribu-tion facilities in all important countries ensure that we are able to offer a quick, reliable service to the electro-plating and printed circuit board manufacturing.Waste Water TreatmentNoteThe data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties,nor the suitability of the product for a specific purpose. Any descriptions,drawings, photographs, data, pro-portions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.SafetyWe know of no ill effects that could have resulted from using our products for the purpose for which they are intended and from processing them in accordance with current practice.According to the experience we have gained up to now and other informa-tion at our disposal, our products do not exert any harmful effects on health, provided that they are used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our Safety Data Sheet are observed.LabellingRefer to the latest Safety Data Sheet for detailed information on product safety.EuropeBASF Aktiengesellschaft Performance Chemicals forDetergents and Formulators Europe Carl-Bosch-Straße 3867056 Ludwigshafen GermanyPhone:+49 621 60-000800 FORMULATORFax:+49 621 60-95186e-mail: @basf-ag.de North AmericaBASF Corporation 100 Campus DriveFlorham Park, NJ 07932, USA Phone:800 526-1072+1 973 245-6000Fax:+1 973 245-6002South AmericaBASF S.A.Estrada Samuel Aizemberg, 170709851-550 São Bernardo do Campo São Paulo, BrazilPhone:+55 11 4343-2342Fax:+55 11 .brAsiaBASF East AsiaRegional Headquarters Ltd.45/F, Jardine House 1 Connaught Place Central Hong KongPhone:+852 2731 0 .sg。

121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。