固定式LED灯具说明书

Address: 3F Building 3, Landwind Industrial Zone, Shiyan Town,ModelPictureDiscriptionSize (LxW)mmLED Q'ty (pcs)Power (W)Voltage&FrequencyColor&KelvinLuminousFlux(lm)Unit price (100-1000pcs)(USD) Unit price>1000pcs)(USD)XH-LPR120-5WAl frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter120mm Cut diameter 105mm 25PCSSMD2835 LEDs5WAC85-265V 50-60Hz warm white/white 2800-7000K400-450 4.44 4.23XH-LPR145-8W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter145mm Cut diameter 130mm 40PCSSMD2835 LEDs8WAC85-265V 50-60Hz warm white/white 2800-7000K650-700 6.89 6.56XH-LPR160-9W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter160mm Cut diameter 145mm 45PCSSMD2835 LEDs9WAC85-265V 50-60Hz warm white/white 2800-7000K750-8007.447.09XH-LPR180-12W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter180mm Cut diameter 160mm 60PCSSMD2835 LEDs12WAC85-265V 50-60Hz warm white/white2800-7000K950-10008.117.72XH-LPR200-14W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter200mm Cut diameter 180mm 70PCSSMD2835 LEDs14WAC85-265V 50-60Hz warm white/white2800-7000K1100-11509.118.68XH-LPR220-16W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter220mm Cut diameter 200mm 80PCSSMD2835 LEDs16WAC85-265V 50-60Hz warm white/white2800-7000K1250-130010.449.95XH-LPR225-18W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter250mm Cut diameter 205mm 90PCSSMD2835 LEDs18WAC85-265V 50-60Hz warm white/white2800-7000K1450-140010.6710.16XH-LPR240-20W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter240mm Cut diameter 220mm 100PCSSMD2835 LEDs20WAC85-265V 50-60Hz warm white/white2800-7000K1650-170012.3311.75XH-LPR300-24W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter300mm Cut diameter 280mm120PCSSMD2835 LEDs24WAC85-265V 50-60Hz warm white/white2800-7000K1950-200015.6714.92ModelPictureDiscriptionSize(LxW)mmLED Q'ty (pcs)Power (W)Voltage&FrequencyColor&KelvinLuminousFlux(lm)Unit price (100-1000pcs)(USD) Unit price>1000pcs)(USD)XH-LPS110-5WAl frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter110x110mm Cut diameter 90x90mm 20PCSSMD2835 LEDs5WAC85-265V 50-60Hz warm white/white 2800-7000K400-450 4.67 4.44XH-LPS160-12W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter160x160mm Cut diameter 140x140mm 60PCSSMD2835 LEDs12WAC85-265V 50-60Hz warm white/white2800-7000K950-10008.337.94XH-LPS180-12W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter180x180mm Cut diameter 160x160mm 60PCSSMD2835 LEDs12WAC85-265V 50-60Hz warm white/white2800-7000K950-10008.568.15XH-LPS200-14W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter200x200mm Cut diameter 180x180mm 72PCSSMD2835 LEDs14WAC85-265V 50-60Hz warm white/white2800-7000K1100-11509.679.21XH-LPS220-16W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter220x220mm Cut diameter 200x200mm 80PCSSMD2835 LEDs16WAC85-265V 50-60Hz warm white/white2800-7000K1250-130010.8910.37XH-LPS240-16W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter240x240mm Cut diameter 180x180mm80PCSSMD2835 LEDs16WAC85-265V 50-60Hz warm white/white2800-7000K1250-130012.3311.75Square Ultra thin LED Downlight seriesRound Ultra thin LED Downlight seriesXINGHUO LED TECH LIMITEDTel : 0086-0755-********-805 Fax: 0086-0755-********Web:Email:**************MSN:**************************:johnzuo88Bao'an District, Shenzhen, China 518108Ultra thin LED Downlight catalogue with pricelistXH-LPS300-20WAl frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter300x300mmCut diameter280x280mm100PCSSMD2835 LEDs20WAC85-265V50-60Hzwarm white/white2800-7000K1650-170015.6714.92Note: 1.LED light source:LumenMax SMD2835 LEDs, 20-22lm/pc LEDs CRI>802.Warranty: 3years3. Price Term: EXW Shenzhen5.Lead time: 3-5 working days for samples, 12-15days for large quantity6.Validity: 30days, the final price should be confirmed with Xinghuo LED7.The MOQ is 100pcs ( No requirements for new customers)Company Name:Account No.:Bank Code: SWIFT Code: Bank address: 004HSBCHKHHHKHHSBC, No. 1 Queen’s Road Central, Central, Hong Kong4. Certification: CE, ROHS, Erp approvedBy T/T payment in advance, kindly write the company name correctly.XINGHUO LED TECH LIMITED561-718396-838。

LED蝴蝶灯IRDE-70031C4-00D-11使用说明书在安装产品之前请仔细阅读说明书，并保存起来以后参考。

注意腐蚀性或溶解性的化学药品会使灯具外壳的防护遭到破坏.正常使用环境温度不超过40℃，湿度为0~95％，如果超出此规定范围，将对产品寿命产生不利的影响。

室内使用警告当产品在包装盒内，请不要接通电源，除非该产品是作为展示用；在安装之前请不要连接高压电源,确保装置完全接地；用户不可拆开灯具, 如有问题，应请专业人员维修。

电源输入电压应与灯体选择输入电压相符。

技术参数1．电源: AC 220-240V 50Hz 功率:25W 保险丝：250V/0.5A2．光源: 3颗3W 3合1 LED3．工作模式：DMX，声控，自动，手动,自联机4．接口：DMX(三芯卡哝接口/XLR)5．净重：3.5kg6. 外型尺寸：L323xW266xH275mm功能设置1．四种工作模式：声控模式——接受声音控制, 发送从机数据自动模式——不接受外界控制,发送从机数据手动模式——不接受外界控制,发送从机数据DMX512模式——接收DMX512控台以及主机发送的数据2.本产品采用按键+数码管设置功能：2-1、操作面板如图1所示：图1 图22-2、数码管数位说明：如图2所示：本产品采用四位数码管显示方式。

2-3、功能设置及显示说明：本产品上电后直接进入DMX模式，初试显示“A001”。

按操作面板上按键，将进入不同工作模式，详细如下表1：表1 “FUNC键模式 数码管初试显示“MODI/RUN”键“UP”键 “DOWN”键 “MODI/RUN”DMX模式 A*** A.001-A.512（DMX地址选择）A.001-A.512 （DMX地址选择）AP.01-AP.11 (样式选择) AP.11-AP.01 (样式选择)F.000-F.008 (频闪速度选择)F.008-F.000 (频闪速度选择)自动模式 AP**S.000-S.008 (马达速度选择)S.008-S.000 (马达速度选择)r.000-r.008 （红色选择）r.008-r.000 （红色选择）g.000-g.008 （绿色选择）g.008-g.000 （绿色选择）b.000-b.008 （蓝色选择）b.008-b.000 （蓝色选择）F.000-F.008 (频闪速度选择)F.008-F.000 (频闪速度选择)手动模式 coLorS.000-S.008 (马达速度选择)S.008-S.000 (马达速度选择)SP.00-SP.01 (声控样式选择)SP.01-SP.00 (声控样式选择)声控模式 Sound S.000-S.008(马达速度选择)S.008-S.000(马达速度选择)保存设定值并显示Obey3模式 Ob-3 修改按键无作用 按键无作用 按键无作用3．功能说明：3-1、自动模式：在此模式下有11种样式，分别为AP01-AP11，每种样式都可以设置频闪速度F.000-F.008和马达转动速度S.000-S.008。

线条灯使用说明书和使用心得1.产品简介E/CS-LK-00是公司出品的LED装饰照明灯具。

主要适用于建筑墙面、桥梁、橱窗、绿化等景观装饰照明。

E/CS-LK-00是可以在室内、户外安装的密封型灯具。

灯体采用压铸铝与挤压铝外壳，美观、耐腐蚀。

清晰钢化玻璃透光率高。

整体灯具外形美观整体灯具外形美观，防水、散热性能优秀。

采用高可靠散热设计，灯具更稳定，寿命更长久。

采用超亮度大功率LED光源。

灯具的恒流驱动线路保证光源的稳定工作。

灯具寿命可达到50000小时。

2.产品规格3.结构安装示意图所有安装必须由相关专业的人员完成（请妥善保管说明书等相关技术资料）。

将灯具支架安装在墙壁指定位置，用高强度螺栓锁紧（如上图）.将灯具卡入支架内部，按照下图连接线路。

4.接线示意图5.常见故障处理中科宇泰E/CS-LK-12LED线条灯中科宇泰光能科技有限公司地址：南通市通州开发区杏园路299号电话：(0513)68856269传真：(0513)68856039室外使用外拍灯的基本用光原理和室内影棚差不多。

但在技术上，效果控制上有其特殊性。

首先，相机的曝光设定必须是全手动的（m档），任何相机的自动测光和自动曝光程序都无法感应出闪光瞬间的曝光量。

在使用闪光时，摄影者必须对闪光灯的曝光特性原理有所掌握。

闪光灯的瞬间发光持续时间很短，一般为千分之一秒以内。

所以控制闪光灯曝光量的相机控制只和光圈以及感光度设定有关，和快门速度无关。

快门速度只要保证处在闪光同步范围内，无论如何变化，只要光圈和感光度设置不变，闪光曝光量是一样的。

其实在某些环境中，快门的选择是会带出不同的效果的．．由于（（闪光灯的瞬间发光持续时间很短，一般为千分之一秒以内。

利用这点，我们慢速拍时，后段时间主体会受到自然光的影响．在拍人像是，我们是黄种人，渗点自然光，刚好会有更好的肤色．快门速度只要保证处在闪光同步范围内，无论如何变化，只要光圈和感光度设置不变，闪光曝光量是一样的。

and reliability.如产品需要用在有特殊质量要求及可靠性要求的地方，请提前咨询瑞丰的销售人员以取得相关信息。

disassemble and analyzein written form.在取得瑞丰的同意前，客户不应该对产品进行拆解分析，如发现失效产品，请直接书面通知瑞丰。

Features 特征Extremelywide viewing angle.发光角度大Suitable for all SMT assembly and solder process.适用于所有的SMT 组装和焊接工艺 Moisture sensitivity level:Level 3.防潮等级Level 3 Package:4000pcs/reel.包装每卷4000pcs RoHS compliant.满足RoHS 要求Description 描述The Colour LED which was fabricated by using a green chip 该产品为绿光LED ，是由绿光芯片封装形成Applications 应用Optical indicator.光学指示Switch and Symbol,Display.开关和标识、显示器等 General use.其他应用RF-GNS150TS-CFPackage Dimension外观尺寸NOTES:1.All dimensions units are millimeters.(所有尺寸标注单位为毫米)2.All dimensions tolerances are 0.2mm unless otherwise noted.(除特别标注外，所有尺寸公差为±0.2毫米)Electrical/Optical Characteristics at Ts=25°C电性与光学特性Note:备注Vr=5V For test conditions.Vr=5v为测试分选条件。

灯具使用说明书一、产品概述本产品是一款高性能的灯具，适用于家庭、办公室、商场等各种室内空间。

采用先进的LED技术，具有高亮度、省电、长寿命等优点，是一种环保节能的照明产品。

二、注意事项1. 请勿将本产品暴露在潮湿或有腐蚀性气体的环境中，以免影响正常使用。

2. 请确保电源电压符合产品标识上的要求，过高或过低的电压都会对产品产生不良影响。

3. 请勿频繁开关灯具，过度开关会缩短产品的使用寿命。

4. 在更换灯泡或维修时，请确认灯具已断电，并等待一段时间以保证温度降低，避免触电的危险。

三、安装步骤1. 在安装前，请确保灯具的电源已经关闭，以免发生电击事故。

2. 找到合适的安装位置，并用螺丝固定好灯具底座。

3. 将灯具的配件按照说明书所示进行组装，并保持固定。

4. 将灯具插座与电源线连接，注意正负极的对应关系。

5. 将灯具的灯泡安装好，并确保连接牢固。

6. 检查安装好的灯具，确保各个部件牢固可靠，然后进行通电测试。

四、操作说明1. 开启：打开电源开关，灯具将亮起。

2. 调整亮度：本产品支持调节亮度功能，请根据具体需求使用对应的调光开关进行调节。

3. 灯光模式切换：本产品支持多种灯光模式，可通过开关或遥控器进行切换。

4. 关闭：关闭电源开关，灯具将熄灭。

五、保养与维护1. 定期清洁：使用柔软的布擦拭灯具表面，不要使用有腐蚀性的清洁剂。

2. 安全检查：定期检查灯具的线路、插头等部件，如有损坏或漏电现象，请停止使用并联系专业维修人员。

3. 注意防水：本产品适合室内使用，切勿将灯具放置在潮湿的环境中，以免发生触电或短路事故。

六、常见问题解答Q: 灯具无法开启怎么办？A: 请检查电源是否正常连接，确认电路没有故障后再尝试开启灯具。

Q: 灯光亮度无法调节怎么办？A: 请确保使用的调光开关与灯具兼容，并检查灯具的亮度调节功能是否正常。

Q: 灯具发出杂音怎么办？A: 杂音可能来自灯具的电源或线路，建议停止使用并联系专业维修人员进行检修。

LED灯产品说明书
一、产品概述
LED灯是一种高效、环保、节能的照明产品，采用最新的LED技术，具有长寿命、低能耗、高亮度等优点。

本产品适用于家庭、办公室、商场、酒店等场所的照明需求。

二、产品特点
1.长寿命：LED灯的使用寿命长达5万小时以上，比传统白炽灯和荧光灯更耐用。

2.低能耗：LED灯的能耗仅为传统白炽灯的1/10，具有极高的节能效果。

3.高亮度：LED灯的亮度比传统白炽灯更高，能够提供更明亮的照明效果。

4.环保：LED灯不含有害物质，对环境和人体健康无害。

5.易于安装：LED灯采用标准接口，可以方便地安装到各种灯具上。

三、使用方法
1.安装：请按照说明书中的步骤正确安装LED灯，确保电源连接稳定。

2.使用：打开电源开关，LED灯即可正常工作。

可以根据需要调节亮度。

3.维护：定期清理灯具表面灰尘，保持灯具清洁。

如遇故障，请联系专业维修人员。

四、注意事项
1.请勿在潮湿环境下使用LED灯。

2.请勿在高温环境下长时间使用LED灯。

3.请勿在电源不稳定的环境下使用LED灯。

4.请勿拆卸或自行维修LED灯。

五、售后服务
本产品自购买之日起享受一年质保服务。

如有质量问题或使用不当导致的损坏，可凭购买凭证免费维修或更换。

第8页光源系列 LAMP Series闪射系列 FLASHING SERIES外形设计美观、烟尘式散热排气孔Beautiful and decent appearance design, Smoke-Dust cooling exhaust hole产品特性 PRODUCTS FEATURES灯体采用6063航空铝材，冷锻式一体成型，外形新颖，美观大方；独有烟尘式散热设计，通过散热排气孔能更快的带走热量，散热效率高；电源采用美国BCD方案设计，高精度智能控制电路，具有过载欠压等保护，使用更安全；进口一体化透镜，透光率高达93%，表面鳞面设计，更好的防止眩光；新型EMC超导热大功率灯珠，具有高光效，高显指，采用陶瓷支架，散热效果更好，将低光衰。

The lamp body is made of 6063 aviation aluminum with novel and beautiful appearance. Product Category: Cold Forging, Integrated molding.Cooling Design: Unique Smoke-Dust Type, it can take away heat faster through the vent holes, so the cooling efficiency is very high.Power source: Using BCD solution design from US with precision smart control circuit, overload & under voltage protection, keeps it more secure.Lens: Integrated lens imported from abroad, light transmission rate is as high as 93%, and the surface design uses Scaly surface, so it can prevent glare much better;New EMC Lamp beads: superconducting heat and high power, high luminance, and high color render index.Ceramic bracket: provides better heat dissipation and low light decay.应用范围商业重点照明、酒店重点照明、装饰照明、专卖店、咖啡厅、KTV、超市、写字楼、书房、面包店、书店、家居等场所。

灯具使用说明书灯具使用说明书1、产品介绍1.1 产品概述此文档用于提供灯具的使用说明。

灯具是一种先进的照明设备，采用最新的LED技术，具有高亮度、低能耗、长寿命等特点。

本说明书将详细介绍灯具的各项功能和使用方法。

1.2 产品特性- 高亮度：灯具采用高亮度LED芯片，可以提供明亮而舒适的照明效果。

- 低能耗：相对于传统灯具，灯具能够节省大量能源，降低用电成本。

- 长寿命：灯具具有较长的使用寿命，可持续使用数万小时以上。

- 节能环保：采用无汞、无紫外线和无辐射的LED光源，符合环保要求。

- 多功能控制：支持多种控制方式，可以通过开关、遥控器、智能方式等进行灯具的开关和亮度调节。

- 安装便捷：灯具采用简单的安装方式，可以方便地安装在天花板、墙壁或地面等位置。

2、使用方法2.1 安装1）将灯具安装座固定在需要安装的位置。

2）将灯具与安装座连接，确保连接紧固可靠。

3）通过连接线将灯具与电源连接。

2.2 开关与亮度调节灯具支持多种开关方式和亮度调节方式。

1）开关方式：- 通过壁挂开关：将灯具与壁挂开关连接，按下开关即可打开或关闭灯具。

- 通过遥控器开关：使用配套的遥控器，按下开关键即可打开或关闭灯具。

- 通过智能方式开关：并安装灯具的智能APP，在方式上进行开关控制。

2）亮度调节方式：- 通过壁挂开关：将灯具与壁挂开关连接，在打开灯具的状态下，多次按下开关，可以调节灯具的亮度。

- 通过遥控器：在灯具打开的状态下，使用遥控器上的亮度调节按钮，可以调节灯具的亮度。

- 通过智能方式：在灯具打开的状态下，打开灯具的智能APP，在APP上选择亮度调节选项，可以调节灯具的亮度。

2.3 其他功能灯具还具有以下其他功能：- 定时开关：支持通过遥控器或智能方式APP进行定时开关设置。

- 色温调节：支持通过遥控器或智能方式APP进行灯具的色温调节。

- 情景模式：支持多种情景模式的切换，如阅读模式、休闲模式、轻松模式等。

- 色彩变换：支持多种颜色的切换，可以根据个人喜好自由调节。

Micropoint 2Product luminaires comply with EN60598-2-22 and are suitable for use in normal interior conditions.o oThis luminaire has an ambient temperature range of 5C to 25COnce installed in the ceiling, the luminaire face is rated IP441. Check the rating label for voltage and frequency before connecting this luminaire to the electrical supply.2. Ensure that the mains supply is switched off when working on this luminaire, whether installing or carrying out any other servicing.3. Manual testing can be carried out by isolating the appropriate un-switched supply sub-circuit by use of a key operated switch.4. To prevent damage to driver, do not mix with conventional magnetic ballasts on the same electrical circuit.5. Where use in more onerous situations is required, e.g. In part-completed buildings before “drying-out” is completed, or areas where ambient temperatures are outside the normal temperature range, then consult our Sales Office.6. This product must only be installed in locations where accidental disconnection of the head interconnection lead is not possible.Servicing and Disposal1. At commissioning and handing over of installation ensure that a copy of these instructions is presented to the authority responsible for the operation and maintenance of the luminaries.2. Servicing, e.g. cleaning, must only be carried out after the electricity supply has been switched off. It must not be assumed that luminaries with lamps not lit are switched off-always check before servicing.3. Cleaning should be carried out at regular intervals to ensure that dirt does not accumulate to an extent that will impair the thermal safety or optical performance of the luminaire. Regular cleaning will also ensure that the optical performance of the luminaries is maintained.4. Avoid touching the LED array surface. To clean - Blow surface with either dry air or nitrogen gas.5. At the end of life the luminaire is classed as WEEE under directive 2012/19/EU and should be disposed of in accordance with local legislation.Note : The LED's are non-replaceable and the whole luminaire should be replaced at the end of life but the batteries can be replaced by a competent person and must be replaced when they no longer meet the rated duration.K1074V2EatonWheatley Hall Road, Doncaster, South Yorkshire, DN2 4NBSalesT: +44 (0)1302 303303 F: +44 (0)1302 367155 E:*******************General+44 (0)1302 321541+44 (0)1302 303220***********************International Sales+44 (0)1302 303250+44 (0)1302 303251********************Instruction Manual - K1074V2June 2019Micropoint 2。

SMS三色照明固定式LED灯具使用说明书安徽省三色照明股份有限公司安徽省铜陵市狮子山区曹山路358号感谢贵单位使用固定式LED 类灯具，请在使用本公司的产品前请仔细阅读本使用说明书。

一、 产品的使用方法：1、 安装前先确认电源的额定输入电压是否在市电压范围内，如电源的输入电压为AC170~265V 时，电网电压不能超出265V 和小于170V ，因为当电网长时间超出265V 时则会损坏电源，当电网电压小于170V 时，电源可能会出现不能正常工作的情况。

2、 注意电源的输入与输出线的区分，避免接反线所引起的电源损坏或不必要的安全事故，接线图如下（实际以各类驱动电源的电路接线图为准。

）：A 、黑色护套线为输入线，棕色和兰色接电网电压，黄/绿线为接地线；B 、白色护套线为输出线，接LED 灯具，棕色接正极，兰色接负极。

3、为了保证使用的安全性和减少干扰，请确保接地线（FG ）可靠接地。

4、不要在超载、极轻负载下使用，电源输出功率尽量与灯具功率棕兰输入线（黑色） 输出线（白色）黄/合理匹配。

在匹配时应使用电源输出功率的80%。

5、对于功率因数为0.4~0.6的驱动器灯具，当多台电源在三相四制系统中以平衡配置时,由于输入电流波形畸变,使零线上的电流不能相抵。

因此在一般情况下，建议将零线的规格设置为相线的1.5—2倍，最好以实测电流方式进行配置。

6、在三相四线380/220V 中性点接地的系统中，零线不允许安装保险或空气开关，如果零线装上保险，当保险熔断时，断点后面的线路上如果三相不平衡，负荷少的一相将出现较高的电压，从而引起烧坏用电设备，特别是发生单相接地时，情况更为严重。

二、 安装注意事项：1、 为了延长灯具的使用寿命，尽量安装在利于散热的环境下工作：A 、严禁将灯具安装在高温环境下工作；B 、尽量在流通的空气中； 2、环境与灯具的作用关系图：020406080100(100%)输出功率环境温度（℃）◆随着环境温度升高。

LED灯具使用说明书
警告:
为了使灯具安装正确，开箱后请详细阅读本说明书，并妥善保管
一、灯具主要结构和适用范围
1.壳体均采用铝合金材料制成，表面抛光拉丝及静电氧化处理，恒温固化，附着力强，具有防水、防尘、结构新颖等特点。

2。

主要适用于办公场所，商场共公场所作照明。

二、主要结构参数
1.额定电压:85-—265V～50/60Hz
2。

额定功率：30W□ 60W□ 90W□ 120W□ 140W□ 160W□
3.防触电保护等级：I类
4.外壳防护等级:IP65
5.LED颗数:
6.产品尺寸
7。

光通量:90LM/W□ 100LM/W □ 110LM/W
8.发光角度；60 °□ 90°□ 120°□
9.使用环境:温度:≥90%；工作温度:—40℃～+55℃
三、安装要求及维护
1、首先整理灯具配套用的各种零部件和附件。

2、安装前必须先切断电源。

3、如使用本产品更换普通灯具，请仔细检查产品接口与旧灯座的符合性,切勿误用。

4、把灯体所带的电线连接在相配的电源线上.
5、确定本产品紧固在被安装物表面在进行以下操作，最后接通电源点亮。

四、注意事项
◆未按照说明书操作可能会有危险.
◆违章操作可能损坏你的物品,甚至会危害到您的人身安全。

灯具说明书格式范文
---。

产品名称， LED吸顶灯。

产品概述，本产品是一款现代简约风格的LED吸顶灯，适用于客厅、卧室等家居环境。

产品特点：
1. 高亮度LED光源，节能环保。

2. 铝合金材质，耐用不易变形。

3. 可调光设计，满足不同场景需求。

4. 简约外观，搭配各种家居风格。

安装说明：
1. 请在安装前断电。

2. 将安装底座固定在吸顶上。

3. 连接电源线，注意接线正确。

4. 将灯具固定在安装底座上。

使用说明：
1. 通电前请确认电源线连接正确。

2. 使用遥控器可进行调光操作。

3. 避免长时间在高亮度状态下使用。

维护保养：
1. 定期清洁灯具表面，避免灰尘积累影响光线效果。

2. 注意防水防潮，避免灯具受潮损坏。

注意事项：
1. 请勿私自拆卸灯具，以免造成安全隐患。

2. 使用过程中如发现异常情况，请及时断电并联系售后服务。

---。

以上是一个简单的灯具说明书格式范文，具体的说明书内容可以根据实际产品特点和要求进行调整和完善。

希望对你有所帮助。

Proof 1 — December 28, 2021 12:34 PMExpand your dimming universeEaton’s W iring Devices Universal dimmers2Eaton’s Wiring Devices Universal dimmersDimming done right.Eaton’s universal dimmers are ergonomically designed and provide flicker-free dimming for seamless ambiance.Highly versatileCompatible with dimmable LED/CFL, INC, HAL, dimmable FLR, EL V and ML V light sources.Adjustable high and low-end trimSet the minimum and maximum light levels for each switch using a simple control Flicker-free dimmingLatest technology enhances performance and delivers seamless dimming.Visit /led-dimming for compatibility informationUniversal dimmer familyUniversal dimmers intro 4Universal decorator dimmer 5Universal full slide dimmer 6Universal slide dimmer7Universal phase selectable slide dimmer 8Universal toggle dimmer 9Universal dimmer sensors10Universal decorator dimmer Universal full slide dimmer Universal slide dimmer Universal toggle dimmer Universal phase selectable dimmer Universal dimmer sensor3Eaton’s Wiring Devices Universal dimmersRated for common lighting loadsDimmable Light-Emitting Diodes (LED)Dimmable Compact Fluorescent (CFL)Electronic & Magnetic Low-Voltage (ELV & MLV)Incandescent/Halogen (INC/HAL)Fluorescent (FLR)Eaton's Wiring Devices Universal dimmers offer a versatile option for any dimming application - fine tune the dimming performance to match your exact needs and change colors as needed to suit any décor.Flexibility & innovationColor flexibility•Single pole or 3-way wiring in one unit •Separate ON/OFF and DIM/BRIGHT controls allow easy return to favorite light levels •Interchangeable faceplates available in 3 different color change kit optionsColor change kits come with three color faceplates, offering design flexibility within one product. Select models are available in 4 different color combination packs.Enjoy flexibility and optimal dimming performance with a variety of light sources and functionalityUniversal dimmers provide rating flexibilityDUL06P SUL06P SUF7Dimmer featuresDecoratordimmer (DUL06P)Slidedimmer (SUL06P)Phase selectable dimmer (SUF7)T oggledimmer (TUL06P)Full slidedimmer (FSUL06)Adjustable low-end trim ✓✓✓✓✓Adjustable high-end trim ✓✓–✓–Wiring configurations Single pole or 3-waySingle pole or 3-waySingle pole or 3-way Single pole or 3-waySingle pole Color change kits ✓✓–✓–De-rating required––– (LED/CFL)–– (INC/FLR/HAL)TUL06P Eaton’s universal dimmers offer flexibility in design with the latest dimming technologyLA (Light Almond), W (White), V (Ivory)LA C2 Color Change KitC6 Color Change KitSG (Silver Granite), W (White), RB (Oil Rubbed Bronze)WC7 Color Change KitBK (Black), B (Brown), GY (Gray)BKFSUL064 Eaton’s Wiring Devices Universal dimmerssingle pole/3-way preset back and side wireDUL06P-___600120INC, HAL, FLR, MLV, ELV _________DUL06P Color change faceplateB, BK, GY, LA, V, WDCK1-___See instruction sheet for de-rating informationColor ordering informationFor ordering devices, include Catalog no. followed by the Color suffix: B (Brown), BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White), C2 (Color Change Kit: LA, W, V), C6 (Color Change Kit: W, RB, SG), C7 (Color Change Kit: BK, B, GY)DUL06PSingle pole and 3-way•Preset feature allows user to return to previous light level when turning lights ON•Adjustable high and low level trim setting for additional energy savings and optimal lamp compatibility •Integrated full-slide control for easy, precise operationUniversal decorator dimmersFeatures• Device can be wired into either 3-way location (load side or line side)• Radio frequency interference filtering is standard on all models • Neutral is not required for installation of device• Compatible with most common dimmable light loads (Forward phase-cut)• Compatible with any decorator wallplate or screwless decorator wallplate •Color change kits are available with packout of 3 different colors for increased flexibility and convenience • Soft gradual ON feature •CA Title 24 compliantDUL06P(PJS26W wallplate sold separately)Universal series dimmersLA (Light Almond), W (White), V (Ivory)C2 Color Change Kit(Brown)(Black)(Gray)(Light Almond)(Ivory)(White)C6 Color Change KitC7 Color Change KitC7 Color Change Kit(Black, Brown, Gray)(Light Almond, White, Ivory)(White, Silver Granite, Oil Rubbed Bronze)W (White), RB (Oil Rubbed Bronze),SG (Silver Granite)BK (Black), B (Brown), GY (Gray)5Eaton’s Wiring Devices Universal dimmersFSUL06Single pole• Neutral is not required for installation of device • Integrated full-slide control for easy, precise operation •Adjustable low- level trim setting for additional energysavings and optimal lamp compatibilityCompatible lamp typesDimmable LED/CFL and side wire FSUL06-___600120INC, HALSee instruction sheet for de-rating informationColor ordering informationFor ordering devices, include Cat. no. followed by the color code: LA (Light Almond), W (White)Universal full slide dimmersFeatures• Radio frequency interference filtering is standard on all models• Compatible with any decorator wallplate or screwless decorator wallplate • Compatible with incandescent, halogen, LED, and CFL (forward phase-cut)• Soft gradual ON feature •CA Title 24 CompliantFSUL06P(PJS26W wallplate sold separately)Full slide series dimmers(Lt. Almond)(White)6 Eaton’s Wiring Devices Universal dimmersSUL06P(PJS26W wallplatesold separately)SUL06PSingle pole and 3-way•Adjustable high and low- level trim setting for additional energy savings and optimal lamp compatibility •Integrated ergonomic full-slide control for easy, precise operation•Reduced ON/OFF switch size for a more aesthetic designUniversal slide dimmersFeatures• Compatible with any decorator wallplate or screwless decorator wallplate • Soft gradual ON feature • No de-rating required• Compatible with most common dimmable lighting loads (Forward phase-cut)• Radio frequency interference filtering is standard on all models • Neutral is not required for installation of device•Device can be wired into either 3-Way location (load side or line side)• Preset feature allows user to return to previous light level when turning lights ON •CATile 24 compliantCompatible lamp TypesDimmable LED/CFL single pole/3-way preset,back and side wireLA, W SUL06P-___600120INC, HAL, FLR, MLV, ELVSee instruction sheet for de-rating informationUniversal series dimmersColor ordering informationFor ordering devices, include Cat. no. followed by the color code: B (Brown), BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White)C2 (Color Change Kit: LA, W, V), C7 (Color Change Kit: BK, B, GY)(Brown)(Black)(Gray)(Lt. Almond)(Ivory)(White)C7 Color Change KitLA (Light Almond), W (White), V (Ivory)C2 Color Change KitBK (Black), B (Brown), GY (Gray)7Eaton’s Wiring Devices Universal dimmersUniversal series dimmers450277LA, V, W 6501000120277INC, HAL, ELVSUF7Universal phase selectable slide dimmersFeatures• Compatible with most common dimmable lighting loads (Forward or Reverse phase-cut)• Neutral is required for installation of device• Radio frequency interference filtering is standard on all models • Precise color matching•Preset feature allows user to return to previous light level when turning lights ONSingle pole and 3-way•Select between forward and reverse phase cut dimming for the most optimal dimming compatibility. Integrated full-slide control for easy, precise operation•Adjustable low-level trim setting for additional energy savings and optimal lamp compatibility•Dual rated for 120V/AC and 277V/AC. Suitable for commercial and residential applicationsSUF7(PJS26W wallplate sold separately)Color ordering informationFor ordering devices, include Cat. no. followed by the color code: B (Brown), BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White)B(Brown)Compliances, specifications and availability are subject to change without notice.8 Eaton’s Wiring Devices Universal dimmersUniversal series dimmersTUL06PSingle pole and 3-way•Preset feature allows user to return to previous light level when turning lights ON• Integrated full-slide control for easy, precise operation •Adjustable high and low- level trim setting for additional energy savings and optimal lamp compatibilityColor change kit optionsC2 Color Change Kit(Light Almond/White/Ivory)C7 Color Change Kit(Black/ Brown/Gray)Compatible lamp typesDimmable LED/CFL single pole/3-way preset, back and side wire600120INC, HAL, FLR, MLV, ELV _________TUL06P Color change faceplateB, BK, GY, LA, V, WSee instruction sheet for de-rating informationColor ordering informationFor ordering devices, include Cat. no. followed by the color code: B (Brown), BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White), C2 (Color Change Kit: LA, W, V), C7 (Color Change Kit: BK, B, GY)Universal toggle dimmersFeatures• Soft gradual ON feature• Device can be wired into either 3-way location (load side or line side)• Neutral is not required for installation of device • Faceplate is removable to allow for color changes• Radio frequency interference filtering is standard on all models•Compatible with any traditional toggle wallplate or screwless toggle wallplate • Compatible with most common dimmable lighting loads (Forward phase-cut)••CA TUL06P(PJS1W wallplate sold separately)(Brown)(Black)(Gray)(Lt. Almond)(Ivory)(White)C7 Color Change KitLA (Light Almond), W (White), V (Ivory)C2 Color Change KitBK (Black), B (Brown), GY (Gray)9Eaton’s Wiring Devices Universal dimmersOSUL06D/VSUL06USingle pole and 3-way•Provides 180 degree field of view and 1000 sq. ft. of major motion coverage•Preset light level change is easily shown with horizontal row of green LEDs•Single green LED indicates load status and motion detectionUniversal series dimmersMotion sensorsRating W/VA V/ACCompatible lamp loadsDescriptionColor suffixCatalog no.300600120120LED/CFL/Fluorescent INC, HAL, ELV, MLV Motion sensor with dimmer C2, C4, C5, C7 OSUL06D-__•300600120120LED/CFL/Fluorescent INC, HAL, ELV, MLVVacancy sensor with dimmerC2, C4, C5, C7VSUL06D-__•Note: Sensors are rated for 120V/AC unless otherwise noted. cULus Listed to UL773A, file no. E1916390SUL06D(PJS26W wallplate sold separately)Universal dimmer sensorsFeatures• Soft ON/fade OFF• Convenient patented built-in wire strippers allow for fast installation•Selectable time delay of 5 seconds (test), 5 minutes, 10 minutes and 20 minutes for lights to remain ON after room is vacated•Occupancy Sensors time delay default set to 5 minutes; Vacancy Sensors time delay default set to 20 minutes•Occupancy Sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light•Occupancy Sensor allows to toggle between Auto ON/Auto OFF or Manual ON/Auto OFF mode with a simple press and hold of switch•Occupancy Sensor provides for a bypass feature to allow the sensor to perform as a traditional switch (Manual ON/Manual OFF)• Electrostatic discharge protection • No leakage to load in OFF mode• Color change faceplate kits provide for a simple in field change • Neutral required for installation of device •CA Title 24 compliantLA (Light Almond), W (White), V (Ivory)LAWVC2 Color Change KitC4 Color Change KitBK (Black), W (White), V (Ivory)BKWVC5 Color Change KitW (White), BK (Black), GY (Gray)WBKGYC7 Color Change KitBK (Black), B (Brown), GY (Gray)BKBGYColor ordering information:For ordering devices, include Catalog no. followed by the Color suffix: C2 (Color Change Kit: LA, W, V), C4 (Color Change Kit: BK, W, V), C5 (Color Change Kit: W, BK, GY), C7 (Color Change Kit: BK, B, GY)Compliances, specifications and availability are subject to change without notice.CA Title 24 compliant10 Eaton’s Wiring Devices Universal dimmers11 Eaton’s Wiring Devices Universal dimmersAt Eaton, we believe that power is a fundamental part of just about everything people do. Technology, transportation, energy and infrastructure-these are things the world relies on every day. That’s why Eaton is dedicated to helping our customers find new ways to manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. To improve people’s lives, the communities where we live and work, and the planet our future generations depend upon. Because that’s what really matters. And we’re here to make sure it works.See more at /whatmatters*We make what matters work.*Follow us on social media to get thelatest product and support information.Eaton is a registered trademark. All other trademarks are property of their respective owners.Eaton 1000 Eaton Boulevard Cleveland, OH 44122United States © 2021 Eaton All Rights Reserved Printed in USA Publication No. BR610065EN June 2021Electrical Sector 203 Cooper Circle Peachtree City, GA 30269United States /wiringdevices Electrical Sector Canada Operations 5925 McLaughlin Road Mississauga, Ontario, L5R 1B8Canada EatonCanada.ca /wiringdevices Electrical Sector Mexico Operations Carr. Tlalnepantla -Cuautitlan Km 17.8 s/n Col. Villa Jardin esq.Cerrada 8 de Mayo Cuautitlan, Mexico CP 54800Mexico Eaton.mx /wiringdevices。

LED路灯产品说明书一、产品说明LED路灯是世界上新一代低碳绿色环保节能照明灯，被广泛适用于道路照明及城市景观照明。

传统路灯均存在耗电大、有污染、工作时温度高、灯具寿命短等难以克服的缺点，导致部分城市以缩短路灯照明时间来缓解电资源贫乏带来的压力，不同程度影响了道路照明效果和城市形象。

本公司生产的LED路灯系列产品具有寿命长、节能、绿色环保、高亮度、高稳定性等特性，安装简单且不必维护更换，大大降低了路灯的安装费用和维护成本，是传统路灯的理想换代产品。

与同类的LED路灯相比，本产品工作温升低，效率高，光效高。

二、尺寸规格尺寸：******mm 三、技术参数电压：220V AC 额定功率：**W工作频率：**Hz--**Hz 色温：*****K功率因数：>0.** 显色性：>***CRI电源效率：**%--**% 环境温度：-**℃---**℃工作温升：≤**℃存储温度：***℃---***℃适应湿度：≤**% 灯具效率：≥**%使用寿命：≥50,000小时防护等级：IP65四、产品型号命名规则：□□□- □□□- □①②③●型号说明①产品名称缩写：②光源类别：LED③额定功率：（备注：可根据客户的需求，调制不同的工作电压值，可选。

）●参数说明：外观：*** 色温：K额定功率：***W 光源类别：LED五、安装说明：该路灯外观安装－先将驱动器引线接线标志与电源线相接。

确认接线无误后，松动固定螺栓，将灯杆（Φ**mm）插入灯杆孔，然后紧上固定螺栓，确认无松动，则安装完毕。

六、维护和保养：考虑户外环境影响，为保证路灯照度和美观，须定期对防护玻璃进行清洁。

七、注意事项：安装前应检查产品外观、光源和散热措施是否完好，并对其电性能进行实验，确认后再安装。

12V/24V DC LED 路灯安装过程中灯具的红、黑导线分别与控制器的“+”“－”极连接。

110V/220V AC LED 路灯安装过程中灯具的黄绿线接地线，黑、红线接交流电源。

济源市云州豫伟光电有限公司第一款LED路灯产品尺寸：375*306*70mm玻璃材质：钢化玻璃表面处理：阳极氧化静电喷涂防水胶圈厚度：6mm整灯寿命：＞50000H.颜色可选：银色产品净重：7.6kg★此款功率可做：42W、56W、70W、84W、98W、112W、126W、140W、154W、168W、182W、196W。

★（可随功率的大小改变外壳的长度，宽度与高度不变）第二款路灯产品尺寸：348*300*80mm玻璃材质：钢化玻璃表面处理：阳极氧化静电喷涂防水胶圈厚度：6mm整灯寿命：＞50000H.★此款功率可做：42W、56W、70W、84W、98W、112W、126W、140W。

第三款矿用隔爆型LED灯适用范围本系列灯具适用于有甲烷、煤尘等爆炸性混合物气体的煤层井下巷道及峒室内作固定式局部照明用。

当白炽灯灯具使用下瓦斯矿井下车场场周围、中心变电所、泵房和主要苍道时，这些场所应有新鲜空气流通。

第四款矿用隔爆型LED日光灯适用范围该产品适用于有甲烷、煤尘等爆炸性混合物气体的煤尘井下巷道及峒室内作固定式局部照明用。

当荧光灯具适用于瓦斯矿井下的车场周围、中心变电所，泵房和主要巷道时，这些场所应有新鲜空气流通。

第五款LED日光灯L ED日光灯采用超高亮L ED白光作为发光光源，散热效果好：采用高品质散热铝，表面温度30－40度，提高LED灯管的使用寿命.光效好：独特的异形铝管，发光效果更好，两侧无暗区。

铝合金壳配PC面罩（透明盖、磨砂条纹盖、雾状盖），材质好，不易损坏，经久耐用，使用安全。

设计新颖,节电显著.方便实用,安全可靠,寿命长.该产品是现代最环保,最节能的照明光源. L ED日光灯有着传统的日光灯的外型.尺寸.口径上都一样，长度有60c m,90c m,120c m,150c m等等，其功率分别为8W，12W，15W，18W；而20W 传统日光灯（电感镇流器）实际耗电约为53W，40W传统日光灯（电感镇流器）实际耗电约为68W ；8W L ED日光灯亮度与传统20W日光灯亮度无异, 15W L ED 日光灯与传统40W日光灯亮度一样.LED日光灯亮度尤其显得更柔和更使人们容易接授。

LED平板灯说明书产品概述平板灯采用超高亮度贴片LED作为光源，以液晶电视（LCD-TV）的背光技术为基础，通过光学级导光板和光扩散板将光线均匀、柔和地照射出来，在有效发挥LED节能环保优点的同时，又解决了眩光问题的一款全新时尚灯具。

LED采用低电压恒流驱动方式，保证了面板灯更加安全、节能、长寿命。

面板灯安装形式多样，可镶嵌于天花板墙壁和安装体表面，也可悬挂在天花板或安装体的下方，非常美观、整洁、协调，广泛应用于办公写字楼 led面板灯嵌入式安装在天花板上代替原来的格栅灯，与天花板融为一体; 或悬挂在天花顶上。

产品特性、特点1、节能、环保无眩光、无鸣音，超薄时尚，指向性光源，降低光污染。

2、采用液晶背光技术及高效LED芯片，独特的散热设计,确保LED功效高、光衰低、寿命长。

3、表面光洁亮丽发光均匀,柔和不刺眼。

4、灯具重量轻超薄，易安装。

5、显色指数高，色彩还原性强，视觉清晰，看物体不失真，适合高档商业照明场所使用；6、无频闪，纯直流工作，消除了传统平板灯频闪引起的视觉疲劳；7、侧光源,LED平板发光技术, 亮度均匀, 舒适护眼8、铝边框+有机玻璃导光板+ 有机玻璃扩散板 ,美观耐用。

9、外置式恒流电源, 瞬间启动, 无噪音; 输入电压 AC100-240V应用场合商业及展览场所酒店、会议室工厂、办公室、住宅机场、地铁站学校、医院等公共场所需要节能和高显色指数的场所。

电器规格安装说明与注意事项：1、产品的安装必须是持证的专业电工。

2、从包装箱里拿出时要检查产品的完整性。

3、产品与易燃材料要保证至少0.2m距离，要保证被安装的天顶有2厘米高的间隙，灯具不能全部安装在天顶的里面，或有热源的墙边，要注意低压与高压电连线分开走线。

4、要确保灯具的电源线有足够的长度，安装灯具的连线时避免过大的拉力，不要使连线打结。

5、安装好后，将灯具低压插头与开关电源低压插头进行连接。

6、非专业人员不得进行拆卸，维修的产品给予更换或保修服务。

照明设备说明书尊敬的用户：感谢您购买我们的照明设备。

为了确保您能正确、安全地使用该设备，我们特别为您提供以下说明书，请仔细阅读并按照说明操作。

一、产品概述本照明设备是一款先进的LED灯具，采用高亮度LED芯片作为光源，具有节能、环保、寿命长的特点。

本设备适用于室内照明，如家庭、办公室、商场等。

二、产品特点1. 高亮度：采用优质LED芯片，亮度高，能够提供明亮而舒适的光照。

2. 节能环保：相较于传统荧光灯，本设备的能耗更低，能有效减少能源浪费，同时也没有含汞等有害物质。

3. 寿命长：所使用的LED芯片寿命长达100,000小时以上，相较于传统灯具寿命有显著提升。

4. 调光功能：本设备支持调光功能，通过开关调节亮度，适应不同场景需求。

三、产品参数1. 输入电压：AC 100-240V2. 频率：50/60Hz3. 功率：20W4. 光通量：2000lm5. 色温：4000K（自然白光）6. 显色指数：Ra > 80四、安装步骤1. 请先确保待安装的照明设备与电源断开连接，以确保您的安全。

2. 将照明设备固定在合适位置，可通过螺丝或者其他固定装置进行安装。

3. 将设备的电源线连接到电源插座上，并确保接触牢固。

4. 开启电源，开始使用本照明设备。

五、使用注意事项1. 请勿将本设备放置在潮湿、高温或者高压环境中，以免损坏设备并造成危险。

2. 请勿在使用时长时间直视灯光，以免对眼睛造成不适。

3. 如发现设备发生故障，请立即停止使用并联系售后服务。

4. 请定期检查设备的连接线路，确保其牢固可靠。

六、维护与保养1. 请将设备放置在通风干燥的环境中，避免积灰、水汽等进入设备内部。

2. 定期使用柔软的干布擦拭设备表面，以保持其亮度和清洁。

3. 定期检查设备的散热器，确保其通畅，避免过热。

七、常见问题解答1. 为什么设备无法开启？答：请先检查电源是否连接正常，以及设备是否处于损坏状态。

如确认以上无问题，请联系售后服务。

U S E R ’S M A N U A LWORKLIGHTII_USERS_MANUAL_20210702WORK LIGHT IILED WORKLIGHT LUMINAIREUSER MANUALPage 2Have a question regarding this manual?WorkLight II Luminaire Installation & User’s Manual© Altman Lighting 2021. All rights reserved.Document Number: 49-0416Version as of: 2021 July 02Note: Information contained in this document may not be duplicated in full or in part by any person without prior written approval of Altman Lighting Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this document for all other purposes is specifically prohibited.The material in this manual is for information purposes only and is subject to change without notice. Altman Lighting assumes no responsibility for any errors or omissions which may appear in this manual. For comments and suggestions regarding corrections and/or updates to this manual, please visit the Altman Lighting web site at or contact your nearest Altman Lighting Regional Manager .El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Altman Lighting no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia o corrección con respecto a este manual, favor de dirijirlo a la oficina de Altman Lighting más cercana.Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Altman Lighting uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. FürBemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Altman Lighting Niederlassung aufzunehmen.Should you have a suggestion or question regarding your Altman Lighting product, we would love to hear from you. You can reach us at:Altman Lighting 1400 East 66th Ave. Denver, CO. 80229 +1 (303) 500-7072 ************************************************************************************PrefaceThe document provides basic information on installation and operational instructions for a quali-fied, trained installer. These instructions provide information for the following product:WorkLight IIIncluded Accessories:70-3259 - Color Frame with Diffusing Gel SC-36-BK - Safety Cable510 - Malleable Iron Pipe ClampPCL-PBG-12-5 (5’ 20A power con to Edison male)Additional product information can be found on our web site at or by scanning the QR code to the right.Altman Lighting continually engages in research related to product improvement. New materials, production methods and design refinements are introduced into existing products without notice as a routine expression of the philosophy. For this reason any current Altman Lighting product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise noted.Our CommitmentPage 3When using electrical equipment, basic safety precautions should always be followed including the following:1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.2. Do not mount near gas or electric heaters.3. Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering byunauthorized personnel.4. Operate only in approved environments. Do not operate outside unless product is designed to do so.5. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.6. Do not use this equipment for other than intended use.7. Refer service to qualified personnel.SAVE THESE INSTRUCTIONS.WARNING: You must have access to a main circuit breaker or other power disconnect device before installing any wiring. Be sure that power is disconnected by removing fuses or turning the main circuit breaker off before installation. Installing the device with power on may expose you to dangerous voltages and damage the device. WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to use proper cable can result in damage to equipment or danger to personnel.WARNING: This equipment is intended for installation in accordance with the National Electric Code® andlocal regulations. Before any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid shock or damage to the control. It is recommended that a qualified electrician perform this installation.WARNING: This Lighting Fixture IS NOT for residential installation or use.WARNING: The structure where fixture(s) is to be mounted must be capable of supporting the weight of the fixture and its accessories. This fixture is for temporary, portable mounting only.WARNING: The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE.CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.CONSULTER UN ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE LES CONDUCTEURS DE LA DÉRIVATION SONT ADÉQUATS.Product Safety NoticesWarningsImportant InformationFCC NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to cor-rect the interference at his own expense.Altman Lighting Product WarrantyWarranty TermsAltman Lighting, Inc., a subsidiary of Altman Stage Lighting Company, Inc., herein referred to as Altman, warrants each new product (except for spare parts or products Altman does not manufacture) for a period of FIVE (5) years and ONE (1) day from date of shipment to correct by repair or replacement any part defect due to faulty material or workmanship.Altman warrants for NINETY (90) days any spare part it manufactures. On spare parts or products Altman does not manufacture, including, but not limited to, lamps, sockets, lenses, roundels, electronics, ignitors, ballasts, etc.; Altman will grant the same war-ranty given Altman by its vendors. Altman assumes no responsibility for damage or faulty performance caused by misuse, improper installation, careless handling or where repairs have been attempted by others. This warranty is in lieu of all warranties or guarantees expressed or implied and no representative or person is authorized to assume Altman any other liability with the sale of Altman’s products.Altman assumes no responsibility for damage or faulty performance caused by misuse, improper installation, careless handling or where repairs have been attempted by others.This warranty is in lieu of all warranties or guarantees expressed or implied and no representative or person is authorized to assume Altman any other liability with the sale of Altman’s products.Warranty ServiceThe customer must receive a Return Material Authorization (RMA) number prior to return, return shipment must be visibly marked with the RMA number and the product must be returned (shipping prepaid) to the factory at:1400 East. 66th AvenueDenver, CO 80229 USA+1-303-500-7072**************************The return must be within FORTY FIVE (45) days of receiving the RMA from Altman. Altman warrants for NINETY (90) days any spare part it manufactures. On spare parts or products Altman does not manufacture, such as lamps, sockets, lenses, roundels, electronics, ignitors, ballasts, etc. Altman will grant the same warranty given Altman by its vendors.Page 4Table Of ContentsImportant Information 3 Altman Lighting Product Warranty 4 Table Of Contents 5 Installation And Setup 6 Power Requirements 6 Connecting Power 6 Mains Dimming 6 Mounting 7 Adjusting Tilt 7 Installing C-Clamp 8 Installing Safety Cable 8 Cleaning and Care 9 Special Cleaning and Care Instructions 9 Service and Maintenance 9 Troubleshooting 10 Troubleshooting Guide 10 Specifications 11Page 5Page 6Installation And SetupPower RequirementsWARNING! The maximum allowable input current is 20 Amps. Do not overload circuits! Lumi-naires must be supplied by a branch circuit protected by a maximum 20 Amp circuit protector. Doit être alimenté par un circuit de dérivation protégé par un maximum de 20 ampères circuitprotecteur. Ne surchargez pas les circuits!The LED Work Light operates on 100 to 230VAC, single phase only and draws a maximum of 90 Watts. This luminaire can be connected to a dimmer or a dimmer-controlled circuit or a circuit providing constant power..Connecting PowerUnits are powered via an AC input cable (sold separately) from 100 to 230VAC, 50/60Hz and draw approxi-mately 90 Watts of power. The table below outlines the wire colors and their purpose.WIRE COLOR PURPOSE Brown or Black Main / (L)ine Blue or White(N)eutralGreen/Yellow or GreenGround / EarthThe Work Light II Luminaire must be connected to and properly grounded to an viable earth ground.Neutral LiveTable 1: AC Input WiringThe WorkLight can be wired into a Phase Cut or Triac Dimmer. On each unit there is a Local Dim dial that will allow to locally dim the unit when connected to constant power.Mains DimmingDimming Notes: The WL-90 is designed as a set it and forget it luminaire that employs a local dim. control and mains dim compatible power supply. When running on mains dim power please make sure that the local dimcontrol is set to full.The Work Light II employs dimming technology that is compatible with many dimmer types, The overall performance of the mains dim. functionality is based upon the dimmer type and its resolution. The WL II has been designed as a “set it and forget it” luminaire and has a lower dimming resolution than that of our performance mains dim. products. When both the WLII and the Altman Pegasus or Chalice are connected tothe same dimmer or type they will display dissimilar dimming curves.Phase Cut AC Sine Wave (from dimmer to fixture)Normal AC Sine Wave (from source to dimmer)Note : The Worklight should be connected to Constant Mains power when using the local dim functions. When connected to a remote dimmer the Local Dim should be set to full on. Neutrik PowerCon WiringMountingThe LED Work Light is simple to install and position where work lighting is needed. The unit is supplied with a C-Clamp, Diffuser Frame, and Safety Cable. When mounting the LED Work Light, you must follow all national and local codes for safe installation and use. Unit weight, with accessories is 11 pounds / 4.98Adjusting TiltThe LED Work Light can have its tilt adjusted via the two lock off handles on each side of the luminaire (refer to Figure 1). Simple loosen (but DO NOT REMOVE) each handle so the unit is able to swing up and down. Set tilt as desired and re-tighten the two lock off handles so the unit does not move from the set position.Page 7Page 8To Install the C-clamp:1. With luminaire on a flat, sturdy surface, position yoke assembly for easy access as illustrated in Figure2.2. Place on 1/2-13 hex bolt, in this order, the 1/2-inch lock washer and then the 1/2-inch flat washer.3. Insert bolt into hole on yoke assembly.4. Position c-clamp over bolt and thread bolt into c-clamp.5. Tighten bolt.Safety Cable InstallationThe provided safety cable should be installed in accordance to local and national codes.NOTE : The safety cable (supplied with unit) should be used and may be required by local and/or national codes when hanging this luminaire. The mounting structure must be capable of supporting the weight of the fixture, lens, cabling, any accessories, etc.Cleaning and CareWARNING! All cleaning should be performed with power completely removed from the lumi-naire. Never remove protective covers when luminaire is powered. Wear appropriate protectiveeye wear and gloves when cleaning the fixture. All service and maintenance, other than describedherein, should be performed by a qualified technician or Authorized Service Center. AT NO TIMESHOULD THE LED BE TOUCHED.WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harshsolvents be used on or near the LED Work Light. These types of cleaners or solvents canpermanently damage the fixture.WARNING! Disassembly (other than as described herein), alterations, unauthorized service, etc.will void the product warranty. Contact your local Altman Lighting officeSpecial Cleaning and Care InstructionsBeing a solid-state fixture, and unlike most fixtures, the LED Work Light requires very littleroutine maintenance by the userIf you have any questions regarding the use or care of your LED Work Light, please contactAltman Lighting technical support (**************************) or your local Authorized Dealer.MPORTANT! The Altman Lighting LED Work Light is a solid state, convection cooled luminaire.As with any solid state luminaire it is important that these units not run in a continuous 24/7operation but be allowed sufficient OFF time during their operation.Service and MaintenanceMPORTANT! For all other service and maintenance issues, please contact your local AltmanLighting office at **************************Page 9Page 10TroubleshootingTroubleshooting GuideThe chart below provides possible causes and remedies for various error messages and/or symptoms. If this chart is unable to address your issue, please contact your authorized dealer or Altman customer service forassistance.Any service and maintenance (including troubleshooting), other than described herein should be performed by an Authorized Altman Lighting Dealer or Service Center.DESCRIPTIONISSUE POSSIBLE CAUSE/REMEDYNo light outputFixture will not produce or output light and connected to power Check to see that the Local Dim Switch is set to anything above zero. When plugged into a Dimmer the Local Dim Switch needs to be at Full.Low light outputFixture produces low light output and connected topower.Check to see that the Local Dim Switch is set above zero. When plugged into a Dimmer the Local Dim Switch needs to be at Full. Make sure that the output of the connected dimmer is set to any top end Power limitations.No power at luminaireLuminaire does not power up.Circuit not energized...verify circuit breaker is turned on.Not plugged in...ensure A/C cable is connected to power source.Power cable wired incorrectly...verify power cable and connector are wired correctly.See “Connecting Power” on page 6 for more information.Page 11Work Light II Installation & Users ManualSpecifications Notes:* - Weight was taken with the 510 and Color Frame attached to the Fixture Materials:Corrosion-resistant materials and hardware Housing:Lightweight aluminum constructionControl:Phase Cut or Triac Dimmer, or Constant power with on board local fader control.Light Engine:90W LED Array - Available in 3000K or 5000K Rated Lifespan:Array rating >50,000 hours to L70Input Voltage:100-230 VAC 50/60 HzWattage:90 WattsLED Engine Cooling:Convection, passiveColor Options:Black or White. Custom colors - consult factory Environment:0 - 40°C (32 - 104°F) with humidity of 5-95% non-condensing)Weight:11 lbs. (4.98 kg)*Compliance:cETLus listed for indoor useWarranty:Five (5) years and One (1) daySupport:Supported Forever - free phone and online tech support for the life of your product.。