模具专业术语-中英文对照

模具术语中英文对照模具(Mold) - A shaped cavity or matrix into which molten or uncured material is poured so thatupon solidification it will take on the shape of the cavity.注射模(Injection mold) - A molding cavity created by injecting material into a mold via a runner system.常用于塑料件注塑。

压铸模(Die casting mold) - A metal mold created for die casting processes, usually zinc, copper or aluminum based alloys.充型范(Pattern) - A full sized model of the desired casting, used to create the mold cavity in processes like sand casting.冒口(Sprue) - The primary vertical channel through which liquid material is poured into mold cavities.冒口通过主要供料道向模板腔内引入熔融金属。

气孔(Vent) - A small channel allowing the gases formed (by vaporization,chemical reaction etc.) to escape from mold cavity.用来排出模具腔内气体的小通道。

流道(Gate) - The channel that conveys molten metal from the sprue into the mold cavity.将熔融金属从主流道(冒口)引入模腔的小槽道。

模具常用术语中英文对照模芯Parting Core局部视图Partial View冷料# Cold Slag线切割 Wire E.D.M轮廊Contour螺纹孔 Tapping Hole连接件 Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press 水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针 Sub-Leaderd Pin镶件Mold Insert加硬Harden唧嘴Sprue设计筒图Design Preliminary名称块表Title Block版本标识Revision Level材料清单Stock List制模Build Mold手动滑块Hand Slide漏水测试Leak Test流道排气Runner V ents抛光Draw Polish侧抽芯 Side Action加强筋 Reinforcing三角撑 Gusset柱子Bossed出模斜度Draft外廊Contour落单会议Kick-Off Meeting 装卸孔 Handling Hole运输安全带 Moldstrap码模槽 Clamp Slot撑头Support Pillar螺牙1/2-13 Eye Bolt 1/2-13Tap 导柱位 Leader Pin Location耐落胶 Teflon Paste偏移量 Offset水塞Water Line Plug撬模脚 Ppy Slot重新加工Reworked配件Components补偿Compensation平面度 Parallel倒角Chamfer模胚Mold Base热嘴Hotnozzle火花机 Edm熔接线 Weildline压机Press晒纹Texturing梯形Trapezoid凸缘、法兰 Flange方铁 Spacer Block顶针板 Ejector Plate顶针底板Ejector Retainer Plate垫板 Retainer Plate后模镶针Core Pin拉圾钉 Stop Pin有托顶针Shoulder Ejector Pin顶针板导套 Guided Ejection Bushing针板导柱Guided Ejection Leader Pin唧嘴 Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套 Runner Stripper Plate Bushing定位圈（法兰） Locating Ring管钉（定位销） Dowel Pin管状管钉 Tubular Dowel吊环 Safety Hoist Ring日期印 Dating Insert环保印 Recycling Insert气顶 Air Poppet V alve截水口镶件 Runner Shut-Off Insert早回 Early Ejector Return加速项 Accelerated Ejector客户 Client产品名 Part Name产品编号Part No缩水Shrinkage版本Rev模胚Mold Base下模镶件Core Block上模镶件Cavity Block小镶件 Sub-Insert下模小镶件 Core Sub-Insert上模小镶件 Cavity Sub-Insert行位Slide行位镶件Slide Insert压条Gib压紧块（铲机） Jaw硬片（摩擦片） Wear Plate水口铁 Runner Bar上模水口铁 Upper Runner Bar下模水口铁 Lower Runner Bar弹簧Spring水口勾针Sprue Puller Pin顶针Ejector Pin撑头Support Pillar直身锁 Side Lock斜度锁 Interlock锁模板 Safety Bar‘O’令（密封圈） O'Ring喉塞Plug隔水片 Baffle波子螺丝（行位定位螺丝） Ball-Catch斜顶Lifter控制开关Switch回针 Return Pin斜导柱 Angle Pin推板 Stripper PlateA’板A'PlateB’板B'Plate方铁（垫铁）Spacer Block顶针板 Ejector Plate顶针底板Ejector Retainer Plate垫板 Retainer Plate垃圾钉 Stop Pin有托顶针 Shoulder Ejector Pin顶针板导套 Guided Ejection Bushing针板导柱Guided Ejection Leader Pin唧嘴 Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套 Runner Stripper Plate Bushing定位圈（法兰） Locating Ring管钉（定位销） Dowel Pin管状管钉 Tubular Dowel吊环 Safety Hoist Ring日期印 Dating Insert环保印 Recycling Insert气顶 Air Poppet V alve截水口镶件 Runner Shut-Off Insert早回 Early Ejector Return加速顶 Accelerated Ejector扁顶 Blade出模斜波Draft手动滑块模具Hand Slide-In Type Mold 回针板 Backup合模Shutoff空隙槽 Clearance Slot导柱及导套 Leader Pin Bushing水口拉钩Spuer Puller模框镶件Pocket Insert成型热固性塑胶模具 Thermoset Mold三板模 3-Plat Mold分型面 Parting Line司筒Ejector Sleeve垫圈Washer熔接线（夹水纹）Weldline吸针Sucker Pin回针板 Retainer Plate顶出板 Knock -Out Plate电动安全开关Electrical-Safety Switch 脱开Cut Of Position预先决定Preload缓冲器 Bumper衬垫Cushion公差Tolerance突然性动作 Slam销针Dowel钩槽Gib精磨Finished通框Through Window粘后模 Sticking Core粘水口 Sticking Sprue夹水纹 Weld Line变形 Warpage走水不平均 Filling Uneven走不齐 Short Shot挂成品 Part Hanging漏水 Water Leakage刮花（擦伤）Galling困气 Air Trapping温度 Temperature注塑模※※※※ction Mold 入水 Gate试板 Sampling压力 Pressure倒圆 Fillet顶棍 Ejector顶白 Stress Mark粘前模 Sticking Cav名称块表Title Block版本标识Revision Level材料清单Stock List斜导柱（斜边） Angle PinA板 A'plateB板 B'plate倒扣 Under-Cut披峰 Flash缩水 Sink Mark氮化 Nitride不规则四边形Trapezoid连续的 Consecutive雕刻 Engrave出模角 Draft分模面 Parting Surface擦位 Shut-Off(S/0)导套 Bushing回针 Return Pin加硬 Harden唧嘴 Sprue设计筒图Design Preliminary丝印 Silkprint不干胶 Adhesive Sticker导向针 Guide Din公差 Tolerance线切割 Wire-Cut电火花 Edm抛光 Polishing蚀纹 Texture探热针 Thermocouple三打螺丝毫（限螺丝）Stripper Bolt 盖板 Cover Plate齿轮 Gear油唧 Hydraulic Cylinder司筒 Ejector Sleeve导柱 Leader Pin冷料# Cold Slag线切割 Wire E.D.M.轮廓 Contour螺纹孔 Tapping Hole连接件 Fittings斜针 Angle Pin接合 Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹 Eyebolt Thread回针 Stop Pin二级顶出针 Sub-Leader Pin镶件 Mold Insert锁定位 Lock楔子(铲鸡) Wedge高产量模量 High V olume Running Mold 剖面图 Cross Section模具结构Mold Construction 模芯 Parting Core局部视图Partial View热流道 Manifold热嘴 Hot Nozzle型腔数 Cav No模号 Mold No胶料 Material尺寸 Dimension重要尺寸Critical Dimension 雕刻 Engrave托司 EJ.GUIDE PIN。

English中文常见词义bolt螺栓die钢模injection注塑mould模具spring弹簧lower die base下模座mould strength模具强度packing materials包材padding block垫块semi-finished product半成品sink mark缩水slide block滑块spare die模具备品thin steel薄钢位weak steel area薄钢位upper die base上模座upper padding plateblank上垫板upper supporting blank上承板buffle隔板bush衬套灌木bushing衬套管cross四通elbow弯头肘部insert镶件latch锁扣lifter斜顶升降机metallurgy冶金plate压条盘子，板材screw螺丝slide滑块ball catch波子弹弓？？choke plug堵头die spring模具弹簧dowel pin管钉guided injection bushing顶针板套管latch lock弹键锁leader pin边钉lever arm杠杆臂locating ring定位圈mold base模胚movable core活动铁芯movable joint活接头parting lock set核膜定位器pipe cap管帽ply bar scot开模槽push bar推杆stripper plate推板bend折弯blanking下料空白burr毛边dome凸圆factor系数gap间隙groove压线reducer减速器tee三通cavity insert上内模die height range适用模高draw hole抽孔ejector pin顶针ejector plate guide顶针板导柱ejector retainer plate顶针板forming die成型模material thickness材料厚度plain die简易模press specification冲床规格progressive die连续模riveting die铆合模shearing die剪边模side stretch测冲压平sprue bushing唧嘴stamp mark冲记号support pillar撑头support plate撑板turned-over edge翻边abrasion磨损adhesive黏附的break断裂brittleness脆性。

assemble mould合箱assembling mould装配铸型baked mould干型bar mould多穴压模big-end-up mould上大下小钢锭模black mould of rice 黑变病blank mould turnover 雏型模翻转blowing mould吹模blue mould of citrus 柑桔青霉病cap mould压顶线脚car type mould conveyor 小车式铸型输送机case mould plaster 母模用石膏casting mould铸型centrifugal casting mould离心铸造铸型ceramic mould casting 陶瓷模注法channel mould槽模chill mould冷铸型(模)close mould封闭铸型close mould (铸造用) 合箱closed mould闭式模; 闭式压模cold-punching mould冷冲模collapsible mould分室模composite ceramic mould复合陶瓷型composite mould casting 复合型铸造copper mould base 铜模底copper mould wall 铜坩埚壁corrugated mould波形铸模cover mould压缝线脚covered floor mould盖箱地面铸型cylinder mould machine 圆网造纸机double-mould-broad ridging plough 双壁起垄犁draw mould薄壁模子driel mould干型drip mould滴水线脚dry sand mould干型ear mould耳模electric pole mould hanger 电杆模型吊架end mould端模Erical mould可压锭模; 挤压锭模evacuated mould空腔模face mould面模fall wheat snow mould冬小麦雪霉病falling mould曲型线条female mould阴模fixed mould固定模flaskless mould无箱铸型floating-point mould浮点模型floor mould地铸模fluted mould波形模foam sponge mould泡沫胶硫化模footed mould压印底圈的模型forging mould锻模front mould前模full-mould casting process 实型铸造gang mould成组模; 成组模板garden mould园土get in the mould垫平铸型glass mould玻璃型; 玻璃铸型glass mould diode 玻璃模二极管graphite mould石墨型grass mould腐草土gray mould灰霉green mould绿霉病green mould of citrus 柑桔绿霉病ground mould地面铸型; 堆土木模gypsum mould石膏型hair mould毛霉hair mould sprout 毛霉芽half mould半型hoist for mould board carrier 模板车升降机hump mould压坯用阳模ice mould冰铸ingot mould钢锭模; 铸锭模; 铸锭型; 锭模ingot mould milling machine 钢锭模铣床ingot slab mould扁钢锭模insulating mould coating 隔热涂料integral mould整模型invested mould熔模铸型iron mould铁锈迹leaf mould叶霉; 腐叶土loam mould泥型lower mould half 下模; 凹模male mould凸模; 阳模master mould母型; 原模mismatch in mould铸型错箱mould印模; 模; 模板; 模具; 模筛样板; 模塑; 模子; 成型模具; 圆网; 造型模板; 塑模; 霉; 霉病; 霉菌; 纸型mould addition 钢锭模添加剂mould and die milling machine 模具铣床mould assembling 合箱mould assembling and closing 铸型合箱mould assembly 合型mould blower 吹型机mould board 造型板; 样板mould boardless plough 无壁犁mould buggy 钢锭模车mould case 模制壳mould clamp 卡具mould clamps 模型紧固夹mould cleaner 模具清洁剂mould closer 合箱机; 合箱装置mould coating material 钢锭模涂料mould core 模芯mould cover 腐殖质层mould cure 模塑硫化; 模型硫化mould dam aged sweet potato poisoning 黑斑甘薯中毒mould dimension 铸型尺寸mould drag 下半箱mould drying 铸型烘干mould efficiency 模塑效率mould emptier 脱模机构mould erosion 铸型冲蚀mould facing 涂料mould fitter 合箱工mould flat gauge 样板mould form 模型型腔mould fungus 霉菌mould growth test 长霉试验mould half 半型mould hardness 铸型硬度mould impression 模型内腔; 模型型腔; 模穴mould in a snap flask 无箱造型mould in the pit 地坑造型mould inoculation 型内孕育mould jacket 型套mould kernel 模芯mould life 模型寿命mould lifting 铸型起模mould lining 坩埚衬里mould loft 放样间mould loft floor 放样台mould lofter 放样工; 放样工人mould loftsman 放样工; 放样工人mould machine 模塑机mould machine of cereal seed selection 谷物选种机mould mark 模缝条痕mould matrix cathode 模制阴极mould oil 脱模油mould on end 垂直分型造型mould pig iron 型铁mould plaster 模型用石膏mould plate 模型板mould plunger 阳模mould plunger force plug 凸模mould preparation bay 钢锭模准备跨mould press 模压机mould pressing 旋压成形mould proofing 防霉mould rains 梅雨mould release 分型粉mould relese 脱模mould rollover unit 翻箱装置mould sand 型砂mould seam 模缝mould setting-and-stripping bay 钢锭模准备和脱锭跨mould shift 错箱mould shrinkage 模内收缩; 模压收缩; 脱模后的收缩mould splits 模组分mould stripping 铸型起模; 拆模mould susceptibility 感霉性mould test chamber 霉菌试验箱mould train 模组mould turnover 翻箱mould unloading 出模; 脱模; 卸模mould veining 铸型裂纹mould vibrator 模板振动器mould vulcanization 模塑硫化mould wash 脱模涂料mould wash mixer 涂料搅拌机multiple cavity mould多型腔铸型; 多巢模multiple mould多件石膏模multiple-part mould多箱铸型needle mould针模one-piece mould整体铸型open bottom mould底开式钢锭模open mould明浇铸型; 敞口铸型open sand mould明浇砂型optical instrument mould and fog auto-detector 光学仪器霉雾自动检测仪ornamental mould艺术造型pallet conveyer mould machine 滑板输送式造型机paper mould纸型paste mould衬碳模paste mould ware 衬碳模成形的制品peat mould泥炭土permanent mould永久铸型pig mould锭模plural mould operation 多模操作porous mould多孔模型positive mould阳模; 阳压模press mould压模press mould ware 模压器皿pressing mould压模process of unconventional heat treatment of mould模具非常规热处理工艺quadrant mould四开木压条real mould实模型rectal suppository mould肛门栓剂模refractory shell mould耐火材料壳型removal of the mould拆模reverse mould倒模; 倒型revesing permanent mould双面金属型ring mould瓶颈模ring-shaped mould环型铸模risk of mould发霉险roast sand mould干砂型rubber mould橡胶皮模running mould模筛样板; 模饰样板saccharifying mould糖化霉sealing of a mould铸型密封section mould型模sectional mould镶合砂型semi-automatic mould半自动模; 半自动塑模semi-chilled mould casting 半金属型铸造; 半冷模铸造semi-permanent mould半永久型; 半永久性模semiclosed top mould半封顶锭模shell mould machine 壳型造型机shiftable mould-board 可拆换的刀片sign mould符号模型single cavity mould整体铸型single mould单件模型skin dried mould面干铸型skin drying mould表干型sleeper steel mould轨枕钢模slime mould粘菌slip flask mould脱箱铸型snap flask mould活箱造型; 无箱铸型snapflask mould脱箱造型snow mould雪霉病; 雪疫病soap mould皂模sooty mould烟霉; 煤污病sooty mould of rice plant 水稻煤病sooty mould of tea 茶叶煤污病spacing mould隔膜split mould对开模stagnant mould不动模型standard steel ingot mould标准钢锭模steel mould钢锭模; 钢模steel mould for electric pole 电杆钢模stock mould定型模stripper-plate mould脱模板塑模sweeping loam mould刮泥型swell of a mould胀砂symbol mould符号模型tape of mould模型锥度thin-walled metal mould薄壁金属型thin-walled mould薄壁结晶器three-cavity mould三开箱铸型tilt-mould billet 可倾模锭坯tire recapping mould轮胎翻修硫化机tomato leaf mould番茄叶霉病top mould half 凸模two-cavity mould双型腔铸型variable-point-mould变点模型vegetable mould腐殖土verge mould山墙檐口线脚waste mould gypsum 废模石膏watch-case mould表壳式压模water mould水霉wood casting mould木质铸造模型X-mould machine 多模成型机。

模具专业词汇中英文对照中文英文中文英文中文凸模punch拉延模drawing die材料凹模die切边模triming die板料压边圈binder（Blankholder）翻边模flang die外板件压料器PAD整形模restrike die内板件氮气缸Gas cylinder分模线punch profile基准孔料厚限位块Balancer block下料模blank die一般孔打死块Bottom block斜锲CAM制造滑板Wear plate拉延面die face数控加工导柱Guide post翻边线Flange line铸造导套Guide bush切边线Trim line厚度铸件casting孔径/孔位Holes dia & position试模拉延筋Draw bead夹具孔Joggle position热处理Heat treatment顶杆孔cushion (Air) pins排气孔Air vent hole标准件Standard parts到底标记bottomingmark冲压方向Pressing direction铸件镶块Cast steel送料方向feed direction锻件镶块Steel insert type背推back up堆焊Weld bolt材料 material定位销dowel废料Scrap cutter减轻孔lightening hole球锁冲头Ball lock punch冲孔pierce冲孔凹模button die废料盒Scrap box侧销SIDE PIN回程钩positive return英文material blankouter panel inner panel Manufacture CNC casting Thickness try-out。

模具专业词汇中英文对照表部分机械类词汇Piping work: 铺管工程Steam trace: 加热蒸汽管道Cutting: 切割socket weld承插焊接fillet weld角焊,填角焊branch connection分支接续fabrication tolerance.制造容差local heat treatment 局部热处理threaded pipe螺纹管seal welding.密封焊接flange joint 凸缘接头undercut 底切feeder馈电线conduit outlet电线引出口seal fitting 密封接头, 密封配件Screw thread lubricant螺纹润滑剂Seal: 绝缘层weld reinforcement 焊缝补强lock washer 锁紧[止动, 防松]垫圈electrical panel.配电板,配电盘nipple螺纹接头zinc plated.镀锌的ring joint 环接, 围缘接合bolt 螺栓control: 操纵器National Electrical Code 全国电气规程master schedule 要紧图表, 综合图表, 设计任务书, 要紧作业表torque wrench 转矩扳手job site 施工现场flange connection.凸缘联接Hard hat：安全帽Goggles：护目镜stockpile贮存packing list装箱单crate: 柳条箱purchased material list原材料进货单back-feed反馈wire coil线盘，线卷，NPT thread. 美国标准锥管螺纹cable gland 电缆衬垫terminal block线弧, 接头排接线盒, 接线板, 线夹power drill机械钻connector. 接线器insulated sleeve绝缘套管wire connector接线器wire terminal电线接头control wiring操纵线路motor lead电动机引出线power wiring电力布线tender document．提供证件orifice plate.挡板nut 螺母flange gasket 法兰垫片dimensional inspection 尺寸检验burn through 烧蚀piping system.管道系统reinforcement of weld加强焊缝fabrication.制造dye penetrant examination染料渗透试验法magnetic particle examination 磁粉检验girth weld环形焊缝cement lined piping 水泥衬里weld joint 焊缝, 焊接接头spool drawing 管路图, 管路详图spot test 抽查, 当场测试butt weld 对接焊缝Random Radiography随机射线照相检查radiographic examination 射线照相检查assembly.装配erection 架设examination试验cable tray.电缆盘rigid steel conduit 钢制电线管power control 功率操纵arc welding 电弧焊control cable操纵电缆操纵索normal bend 法向[法线]弯管cable glands: 电缆衬垫exfoliation剥落power receptacle 电力插座grounding conductor 接地导体lighting fixture照明器材junction box 分线箱race way 电缆管道terminal box接线盒distribution board配电盘, 配电屏receptacle 插座tumble switch.翻转开关,拨动式开关cathodic protection system 阴极保护系统Circuit breaker断路开关amplifier panel 放大器盘control console 操纵台electrical material电气材料convenience receptacle.电源插座cable gland 电缆衬垫TIG：Tungsten-arc Inert-Gas welding 钨极电弧惰性气体保护焊filler rod焊条tensile strength 抗张强度shield gas 保护气体shield jig保护夹具high frequency generator.高频发电机welding rod 焊条filler metal 焊料, 焊丝shop fabrication 车间制造field installation 现场安装welding bead 焊道both sides welding.双面焊接residual stress 残余应力electrode 电焊条condensation 冷凝longitudinal.纵向的horizontal line 水平线circumferential joint 周圈接缝nondestructive examination.非破坏性检验, qualification: 合格性construction work施工工程welded joint焊接缝焊接节点gas cutting.气割arc cutting电弧切割grind off 磨掉metallic luster 金属光泽Screwed Piping Joints螺丝状的管接头gouging .刨削槽Bending: 挠曲witness test订货人在场的试验Welding: 焊接Threading: 车缧纹Leveling：校平color identification 彩色识别Alignment：对准,定位调整check against 检查, 核对Fixing：固定Console：操纵台cubicle室,箱audit 审计material certificate.材料合格证vertical panel竖直面板power distribution panel 配电盘gauge board仪表板beveling 磨斜棱,磨斜边local panel 现场配电盘grouting 灌浆fabrication 加工,制造instrument rack 计测器支架tank gauge 液面计flushing 冲洗，填缝analyzer分析器piping管道敷设tubing敷设管道cable fitting电缆配件elbow.弯管接头main pipe 主管道bend.弯管弯头solvent 溶剂postweld heat treatment 焊后热处理jig.夹具arc gouging 电弧刨削chipping修琢machining 机械加工bridges.管式桥clamp.夹钳tack welding 点焊butt welding 对接焊grinder. 磨床commencement.开始gusset plate角撑板, 加固板process pipe 工艺管道land 纹间表面tee 三通管丁字钢T形梁opening 开口reinforcing pad.补强垫,增强衬板flux 焊剂wet developer 湿显像剂blowhole气泡,气孔inclusion 杂质imperfection 缺陷limitation 限度valve 阀,闸门structural attachment 结构附件tapered allowance 削尖余量tack welding 平头焊接sputter 喷溅scale 废料lateral translation侧向平移weld joint 焊缝, 焊接接头plug.塞fusion 熔融base material基底材料lead foil 铅箔intensifying screen 增光屏, 光增强屏pressure test.压力试验film density.影片密度line number行数leak test漏泄试验plate thickness 筛板厚度restoration修理field fabricated 工地制造的,现场装配的junction box.接线盒flow sheet 流程图vent 放气孔, 通风孔drain 排水管instrument air仪表气源blind挡板pipe arrangement 管配置civil engineer.土木工程师bus duct 母线槽substation分站flow instrument 流量计power distribution panel 配电盘level instrument 位面计, 水平仪pressure instrument 压力仪表/压力计level switch (信号)电平开关,gage glass 液位玻璃管pilot tube指示灯line check 小检修recalibration.复校,重新校准blinding plate盲板expansion joint 伸缩接头hydrostatic pressure test静水压试验pneumatic pressure 气压scaffolding脚手架check valve止回阀liquid penetrant examination液体渗透探伤test pump试验泵witnessed inspections 现场检测hanger吊架control valve操纵阀,fabrication drawing 制造图纸,制作图schedule number表示管壁厚度系列的号码hydrostatic test .流体静力学试验,水压试验design pressure 设计压力disposition notice 处罚通知书pipe stanchion 管支柱bellow type 波纹管式expansion joint 伸缩接头vibration stopper：减震器subcontractor 转包商WPS Works Process Specification 典型工艺规程piping.管道系统flange.凸缘,sleeve 套筒ferritic .铁素体的identification mark 识别标志stencil.模绘片版,镂花模板stamping .冲压silicone paint硅树脂油漆weld bead 焊缝automatic temperature recorder 温度自动记录器penetrameter 透度计film viewer底片观察用光源civil works土建工程，建筑工程lump sum price 混合价格,统包价格scrap material废料caulking metal填隙合金[金属](材料) application drawing操作图, 应用图cable routing电缆路由选择channel bases沟渠基底vertical panel竖直面板local panel 现场配电盘power distribution panel 配电盘gauge board样板, 模板规准尺anchor bolt 锚定螺栓expansion bolt 伸缩栓, 扩开螺栓field instrument.携带式仪表instrument rack 计测器支架,计测器框架tank gauge 油箱液位计guide wire 尺度[定距]索,准绳name plate名牌, 商标lead pipe铅管take-off valve输出阀sub-header分联箱air header 集气管pneumatic signal气动信号steam trace 加热蒸汽管道electric heat tracing.电伴随加热cable trunk 电缆管道stop end封端fire barriers防火间隔bonding wire 接合线, 焊线conduit box [电]导管分线匣刚性导管rigid conduitsflexible conduit软管conduit entry 导管引入装置平交道口管道组road crossing duct bank Capping ends顶盖末端电缆铠装cable armor电缆包皮层Cable sheathsealing compound电缆膏coaxial cable同轴电缆loop test环路测试sequence test.联锁顺序试验lintel beam 水平横楣梁flash plate闪熔镀层anchor bolt 地脚螺栓expansion bolt伸缩栓, 扩开螺栓shim plate 垫板push button station按钮式操纵站logic diagram逻辑图calculation sheet计算书flow instrument流量计level instrument 位面计, 水平仪layout drawing 布置图tie band捆扎用带材加热室Heating boxes切孔cutting openingcontrol valve actuator 阀控传动机构air set空气中凝固, 常温自硬自然硬化solenoid valve.螺线管阀,电磁阀calorimeter热量计odometer历程标tachometer转速计chronometer精密计时表单价unit price工日合计Man-day total/work-day total 人工费cost of labor材料费materials expenses机械的mechanical检查接线connection test发电机generator调相机phase regulator周波cycle减负荷装置load-shedding equipment 断路器柜circuit breaker cabinet单母线single busbar互感器transformer每相电流Current by Phase封闭式插接close type socket joint发电机操纵面板generator control panel分级卸载sorted unloading同步操纵synchronization control调速器speed governor信号屏signal screen继电器relay高压柜high pressure cabinet油浸电力变压器oil-immersed power transformer空气断路器air circuit breaker操纵屏control panel直流馈电屏direct current feed control panel电容器electric condenser计量盘metering panel成套配电箱whole set of distribution box落地式floor model操纵开关Control switches铜芯电力电缆Copper core power cable操纵电缆actuating cable热缩式电力电缆终端头pyrocondensation power cable terminal 钢结构支架配管steel structure bracket tubing万用槽钢versatile U-steel电缆托架cable bracket钢制托盘式桥架steel Tray-type cable support system waterproof socket 防水插座防爆插座Explosion-proof socket接地绞线earthing twisted pair接地母线earthing bus接地极lightning conductor硬质聚氯乙烯管rigid polyvinyl chloride pipe航空集散站air terminal水银灯具Mercury Lamp金属卤化物灯metal halide lamp高压钠灯High Pressure Sodium Lamp额定电压Rated Voltage额定功率Rated Power光源Light Source防护等级Grade of Protection高压汞灯High Pressure Mercury Lamp高压钠灯High Pressure Sodium Lamp金属卤化物灯Metallic Halide Lamp照明电缆lighting cable单线mongline穿线threading接地跨接线earthing jumper分线箱junction box接线盒connection box圆钢round steel扁钢flat steel插座socket配电盘switchboard转换开关alternation switch自动指令呼叫装置automatic instruction calling device扬声器loudspeaker明装Unfold Install暗装Conceal Install感温探测器Thermal Detector恒温·干燥器/恒温恒湿器Drying Ovens/Humidity Chambers---(在重庆有OEM生产)送风定温恒温器Forced Convection Constant Temperature Ovens惰性气体恒温器Inert Gas Ovens精密恒温器Precision Constant Temperature Ovens洁净恒温器Clean Ovens送风定温干燥器Forced Convection Constant Temperature Drying Ovens空气幕送风定温恒温器Forced Convection Ovens With Air Curtain定温干燥箱Constant Temperature Drying Ovens角形真空定温干燥器Vacuum Drying Ovens恒温恒湿器Constant Temperature and Humidity Chambers流水线设备In-Line System for Underfill Adhesive and Encapsulation恒温培养器Constant Temperature Incubators---可程式低温培养器Low Temperature Program Type Incubators低温培养器Low Temperature Incubators低温稳固性培养器Low Temperature Stability Incubators培养器IncubatorsCO2培养器CO2 Incubators振荡培养器Shaking Incubators冻结干燥器Freeze Dryers---冻结干燥器Freeze Dryers离心形冻结干燥器Centrifugal Freeze Dryers灭菌器Sterilizers---干热灭菌器Drying Sterilizers高压灭菌器Autoclaves Sterilizers低温等离子灭菌器Low Temperature Plasma Sterilizers环形燃烧管灭菌器Loop Cinerator纯水制造装置Water Purifiers---纯水制造装置Water Stills超纯水制造装置Ultra-pure Water Purifiers简易纯水制造装置Water Purifiers超纯水制造装置系统Ultra-pure Water Purifier System大容量纯水制造装置Water Purifiers System洗净器Washers---实验室玻璃器皿清洗机Laboratory Glassware Washers超声波清洗机Ultrasonic Cleaners大型超声波清洗机Aqueous Ultrasonic Cleaning Systems超声波试管清洗机Ultrasonic Pipet Washers超声波清洗机Ultrasonic Cleaners恒温液槽Constant Temperature Baths---投入式恒温装置Constant Temperature Devices油槽Oil Baths振荡式低温水槽Low Constant Temperature Shaking Baths 深槽形恒温水槽Constant Temperature Water Baths粘度测定槽Kinematic Viscosity Baths液压式恒温水槽Constant Temperature Water Baths精密低温恒温水槽Precision Low Constant Temperature Water Baths 低温恒温水槽Low Constant Temperature Water Baths试验管加热板Heating Blocks冷却液体循环器Cooling Liquid Circulators冷却水循环器Cooling Water Circulators便携式冷却器Immersion Cooler寒流捕获器Cooling Trap冷却水外部循环器Cooling Water Circulators试验槽Thoughs高温炉High Temperature Furnaces Heating Apparatus---马弗炉Muffle Furnaces超高温电气炉Ultra-High Temperature Electric Furnaces高温电气炉High Temperature Electric Furnaces真空气体置换炉Gas Replacement Vacuum Furnaces造粒干燥装置Granulating and Drying Apparatus for Wet Powder Body and Liquid---喷雾干燥器Spray Dryer有机溶剂喷雾干燥器Spray Dryer生产线喷雾干燥器Spray Dryer for Product Line浓缩器Evaporators---旋转蒸发仪Rotary Evaporators溶媒回收装置Solvent Recovery Unit乳化·搅拌·振荡器Homogenizers, Stirrers, Shakers---磁力搅拌器Magnetic Stirrers加热板Hot Plates振荡器Shakers送液·减压·加压装置Aspirators, Pumps, Compressors搅拌器Stirrers实验室自动乳钵Laboratory Mill/Universal Ball Mill粉碎器Cutting MillsYAMATO电子厂关连仪器Electronics Facilities Related Devices等离子装置Low Temperature Ashers, Cleaners, Etchers---气体等离子蚀刻机Gas Plasma Etcher “Plasma Reactor”气体等离子清洗机Gas Plasma Dry Cleaner气体等离子灰化机Gas Plasma Asher半导体基板自动机器Automatic Machine电子半导体/材料关连仪器Electronics Facilities Related Devices---桌上小型探测显微镜Desk-Top Small Probe Microscope “Nanopics”半导体制造用检查装置Yield Management for Semiconductor Ptoducts非破坏评价解析装置Nondestructive Testing System紫外线洗净·改质装置Ultra-Violet Curing System尘埃计数器Particle Counters风速计Anemometers去静电风机、风幕及静电测定计Auto Balanced Over Head Ion Blower环境试验设备Temperature,Humidity Testing Chamber防湿保管库Moisture-proof StorageNanotechnology半导体用设备ANELVA日本电子制品Jeol振动试验装置Vibration Test Systems冲击试验装置Shock Testing SystemsYAMATO生命科学关连仪器Life-Science Related Instruments生物技术关连仪器·食品分析仪器Bio-Technology Related Instruments, Food Analysises Instruments—形态观察分析系统Mapping Analyzer生物分子间相互作用分析系统Biomioleculer Interaction Analysis System 高速液相色谱仪LC-CE/CEC System血管壁细胞混合培养系统Dynamic Coculture System动植物破碎机基因检查仪器Genopattern AnalyzerATP测定器ATP Measuring Instrument分光光度计Microplate Spectrophotometer细胞培养·发酵用自动分析系统Automated Chemistry Analyzer for Monitoring Cell Culture and Fermentation Processes细胞生死判别系统Cell Vital Analyzer细胞计数分析装置Cell Scaler/Analyzer2元电泳仪荧光Spot Cutter高速冷却离心机High Speed Refrigerated,Centrifuges微量高速离心机High Speed micro-Centrifuges液体中微生物简单测试仪Simple Germ Test Kit “simple Tester” 试料混合器Blender防爆冷藏柜Explosion proof Freezer and Refrigerator杀菌水生成系统Sterilization Water Production Device膜式脱气装置Filter-type Air Extractor抗酸化机能水制造装置Acid-Resistant Water Purifier高性能净水器反渗透式高性能净水器分析仪器Analytical Instruments---分光光度计Spectrophotometer元素分析装置Atomic Absorption SpectrophotometerICP发光分光分析ICP Atomic Emission SpectrophotometerX线光分析计X-Ray Fluorescence Analysis气体分析计Gas Analyzers回折/散乱式粒度分布测定装置Analyzer,Particle Size Distribution Laser Diffraction Device低真空走查电子显微镜Scanning Probe Micro Scope高速液相色谱仪Liquid Chromatograph滴定装置Automatic Titration大塚电子制品电位计膜厚计散乱光光度计LCD测定·评价装置热量计天平Balances物性试验·测定器Physical Properties Measuring Apparatus, Testing, and Measuring Apparatus---近红外分析装置Fourier Transform Near Infrared Spectrometer融点测定仪Melting Point Measuring Instrument热分析系统Thermo System自动反应装置Automatic Reactor水分计Moisture Analyzer引张压缩试验机Tester,Tension and Compression数字粘度计Digital Viscometer振动式粘度计Vibro Viscometer浸透压测定装置Osmotic Pressure Meters超临界水酸化系统Small SCWO Systems重金属排液处理装置Heavy Metal Eliminator简易水质检查试验纸Water Quality Tester StripsPH计Phmeter导电率计Conductivity Meters湿度计Hygrothermometers过滤器FilterYAMATO试验研究设备Laboratory Design and Engineering---通风柜Fume Hoods排风机Blowers实验台Laboratory Furniture保管柜Storage Cabinets实验台用附属器具Carts and Laboratory Table Attachments环境制御设施Research Facilities, Product Lines, Environment control Devices---生物安全柜Biohazard Safety Equipment废水处理系统Waste Water Treatment试验动物饲养室Bio Clean Room for Animal experiment环境实验设施Research Facilities, Product Lines, Environment Experiment Facilities---电磁波室隔音室恒温室/恒温恒湿室Constant Temperature and Humidity Facilities低温室Constant Low Temperature Facilities人工气候室Artificial Atmospheric Phenomena Simulator动物研究用高压蒸汽灭菌装置Sterilization Systems, for Animal Research。

"R，L Co.,Ltd"模具常用术语中英文对照模芯 Parting Core 局部视图Partial View 冷料# Cold Slag线切割 Wire E.D.M 轮廊Contour 螺纹孔 Tapping Hole连接件 Fittings 斜针 AnglePin 接合 Engage 替 换 镶 件InterchangeableInserts 指定吨位的注塑机Specific水嘴接头 Water Fittings 漏水测试 Leak Test流道排气 Runner Vents抛光 Draw Polish螺纹 Eyebolt Thread侧抽芯 Side Action回针 Stop Pin二级顶出针 Sub-Leaderd Pin镶件 Mold Insert加硬 Harden唧嘴 Sprue设计筒图 Design Preliminary名称块表 Title Block版本标识 Revision Level材料清单 Stock ListMold 制模 Build Mold手动滑块 Hand Slide Press加强筋Reinforcing三角撑Gusset 柱子Bossed 出模斜度Draft 外廊Contour 落单会议Kick-Off Meeting 装卸孔Handling Hole 运输安全带Moldstrap 码模槽Clamp Slot 撑头Support Pillar 螺牙1/2-13 Eye Bolt 1/2-13Tap 导柱位Leader Pin Location 耐落胶Teflon Paste偏移量Offset水塞Water Line Plug撬模脚Ppy Slot重新加工Reworked配件Components补偿Compensation平面度Parallel 倒角Chamfer模胚Mold Base热嘴Hotnozzle火花机Edm熔接线Weildline压机Press晒纹Texturing梯形Trapezoid凸缘、法兰Flange方铁Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate 环保印Recycling Insert后模镶针Core Pin 气顶Air Poppet Valve拉圾钉Stop Pin 截水口镶件Runner Shut-Off Insert 有托顶针Shoulder Ejector Pin 早回Early Ejector Return 顶针板导套G uided Ejection Bushing 加速项Accelerated Ejector针板导柱Guided Ejection Leader 客户ClientPin产品名Part Name唧嘴Sprue Bushing产品编号Part No三板模延伸式唧嘴Extension Nozzle缩水Shrinkage Bushing版本Rev 水口板导套Runner Stripper PlateBushing 模胚Mold Base定位圈（法兰）Locating Ring 下模镶件Core Block管钉（定位销）Dowel Pin 上模镶件Cavity Block管状管钉Tubular Dowel 吊环Safety Hoist Ring小镶件Sub-Insert下模小镶件Core Sub-Insert日期印Dating Insert 上模小镶件Cavity Sub-Insert行位 Slide喉塞 Plug行位镶件 Slide Insert压条 Gib 压紧块（铲机） Jaw 硬片（摩擦片） Wear Plate 水口铁 Runner Bar 上模水口铁 Upper Runner Bar 下模水口铁Lower Runner Bar 弹簧 Spring 水口勾针Sprue Puller Pin 顶针 Ejector Pin 撑头Support Pillar 直身锁 Side Lock顶针底板 Ejector Retainer Plate 斜度锁Interlock垫板Retainer Plate锁模板 Safety Bar垃圾钉Stop Pin'O'令（密封圈）O'Ring有托顶针 Shoulder Ejector Pin 隔水片 Baffle波子螺丝（行位定位螺丝）Ball-Catch斜顶 Lifter控制开关 Switch回针Return Pin斜导柱Angle Pin推板Stripper PlateA '板A'PlateB '板B'Plate方铁（垫铁） Spacer Block顶针板 Ejector PlateEjectionBushing针板导柱 Guided Ejection Leader Pin 唧嘴 Sprue Bushing三板模延伸式唧嘴 Extension NozzleBushing水口板导套 Runner Stripper Plate加速顶Accelerated Ejector扁顶Blade出模斜波 Draft手动滑块模具 Hand Slide-In TypeMold回针板 Backup合模 Shutoff空隙槽 Clearance SlotMold日期印Dating Insert三板模 3-Plat Mold环保印Recycling Insert分型面 Parting Line气顶Air Poppet Valve司筒 Ejector Sleeve截水口镶件 R unner Shut-Off Insert垫圈 Washer早回Early Ejector Return吊环 Safety Hoist Ring顶针板导套GuidedBushing定位圈（法兰）Locating Ring导柱及导套 Leader Pin Bushing管钉（定位销） Dowel Pin 水口拉钩 Spuer Puller管状管钉Tubular Dowel模框镶件 Pocket Insert成型热固性塑胶模具 Thermoset吸针 Sucker Pin 回针板 Retainer Plate顶出板 Knock -Out Plate电 动 安 全 开 关 Electrical-Safety Switch脱开 Cut Of Position预先决定 Preload缓冲器 Bumper衬垫 Cushion公差 Tolerance突然性动作 Slam销针 Dowel钩槽 Gib精磨 Finished通框 Through Window夹水纹Weld Line变形Warpage走水不平均FillingUneven走不齐Short Shot挂成品Part Hanging漏水 Water Leakage刮花（擦伤） Galling漏电Ele Leakage困气Air Trapping温度Temperature注塑模Injection Mold入水Gate试板Sampling压力 Pressure倒圆Fillet粘后模 Sticking Core熔接线（夹水纹） Weldline粘水口 StickingSprue顶棍Ejector 雕刻Engrave顶白Stress Mark 出模角Draft粘前模Sticking Cav 分模面Parting Surface名称块表Title Block 擦位Shut-Off(S/0)版本标识Revision Level 导套Bushing材料清单Stock List 回针Return Pin斜导柱（斜边）Angle Pin 加硬HardenA板A'plate 唧嘴SprueB板B'plate 设计筒图Design Preliminary 倒扣Under-Cut 丝印Silkprint披峰Flash 不干胶Adhesive Sticker 缩水Sink Mark 导向针Guide Din氮化Nitride 公差Tolerance不规则四边形Trapezoid 线切割Wire-Cut缩水Shrinkage 电火花Edm连续的Consecutive 抛光Polishing蚀纹Texture Inserts探热针Thermocouple 指定吨位的注塑机Specific Press三打螺丝毫（限螺丝）Stripper 水嘴接头Water FittingsBolt螺纹Eyebolt Thread盖板Cover Plate回针Stop Pin齿轮Gear二级顶出针Sub-Leader Pin油唧Hydraulic Cylinder镶件Mold Insert司筒Ejector Sleeve锁定位Lock导柱Leader Pin楔子（铲鸡） Wedge冷料# Cold Slag高产量模量High Volume Running Mold线切割Wire E.D.M.剖面图Cross Section轮廓Contour模具结构Mold Construction螺纹孔Tapping Hole模芯Parting Core连接件Fittings局部视图Partial View斜针Angle Pin热流道Manifold接合Engage热嘴Hot Nozzle替换镶件Interchangeable Mold型腔数Cav No模号Mold No 胶料Material 尺寸Dimension重要尺寸Critical Dimension雕刻Engrave 托司EJ.GUIDE PIN。

精心整理AD-Diameter Thetreaddiameteratthecenterlineofthetread(EU);also:"T-Diameter"(GT)?AD 直径：指胎面中心线直径（EU ）。

又叫T 直径（GT ）Auto-lockEar ALugontheconeringusedtomountthemold/containerinthetophalfofa60“NRMAuto -lo ckpress.??导环上的突缘，用于和60“NRMAuto -lock 硫化机上半部连接。

BeadRing Thetirebeadformingring(also:toering)???????分离钩：座帮助花纹块和轮胎进行分离。

BreakerHookGuidePieceAblockboltedtothebreakerhookthatalignsthetreadsegmentwithaslotinthebottomcontainerplate. ??分离钩导块：用螺栓固定在BreakerHook 上，定位花纹块和模壳底座上槽的定位块。

BronzeWearPlates Anysacrificialmetalplateplacedunder,overorbehindacomponenttokeeptheco mponentsfromwearingoneachother(greasing)?青铜耐磨板(油润滑的)Casting Anun-machinedcastmetaltreadringorSegment?铸件：未加工的金属花纹圈或花纹块铸件。

CenteringRing Theringmountedonthebottompressplatentolocatethemold/containerconcentrically tothepress;also:"Pressregister"??定中环,也称“Pressregister”ClampRings Thebladderclampingassembly??胶囊夹盘ConeRing Theouterringthattransformstheaxialmovementofthepressinaradialoneofthesegments;a??Conicity?锥度?模壳,??rea????DEVADowelPins Thepinsthatkeepthemoldhalvesandpartsaligned(containersorHKKmolds)?定位销：用来对模具的半模或零件定位的销（模壳或HKK模具）。

以下是30 个模具常用语的中英文对照：1.模具：mold2.模具设计：mold design3.模具制造：mold manufacturing4.模具加工：mold processing5.模具寿命：mold life6.模具维护：mold maintenance7.模具成本：mold cost8.模具材料：mold material9.模具结构：mold structure10.模具零件：mold part11.模具装配：mold assembly12.模具调试：mold debug13.模具成型：mold forming14.模具分型面：mold parting surface15.模具型腔：mold cavity16.模具型芯：mold core17.模具滑块：mold slider18.模具斜顶：mold lifter19.模具顶针：mold ejector pin20.模具冷却系统：mold cooling system21.模具浇注系统：mold gating system22.模具排气系统：mold venting system23.模具尺寸公差：mold dimensional tolerance24.模具表面粗糙度：mold surface roughness25.模具硬度：mold hardness26.模具钢：mold steel27.模具加工工艺：mold processing technology28.模具检测：mold inspection29.模具修改：mold modification30.模具报废：mold scrap。

模具术语中英文对照表模具是制造行业中重要的零部件之一，不同的国家或地区对于模具的称呼和术语有着不同的表述。

下面是模具术语的中英文对照表，供大家参考。

一、模具结构及零部件1.凸模：punch/upper die2.凹模：die/lower die3.合页模：hinge die4.活动凸模：movable punch5.固定凸模：fixed punch6.活动凹模：movable die7.固定凹模：fixed die8.下座：bottom plate/bottom clamping plate9.定位销：locating pin10.定位套：locating sleeve/bushing11.导柱：guide pillar12.导套：guide bush13.顶杆：ejector rod/knockout rod14.顶针：ejector pin/knockout pin15.顶出板：ejector plate/knockout plate16.压簧：compression spring17.弹簧：tension spring18.滑块：slide block19.顶针板：ejector plate/knockout plate二、模具材料1.冷/热作模钢：cold/hot work die steel2.合金工具钢：alloy tool steel3.模具钢：mould steel4.不锈钢：stainless steel5.硬质合金：hard alloy/cemented carbide6.铝：aluminum7.铜：copper8.铜合金：copper alloy9.镁合金：magnesium alloy三、模具表面处理1.硬化：hardening2.淬火：quenching3.氮化：nitriding4.喷涂：spraying5.镀铬：chrome plating6.抛光：polishing7.喷砂：sandblasting四、模具制造工艺1.车削：turning2.铣削：milling3.磨削：grinding4.电火花加工：electric discharge machining (EDM)5.线割加工：wire-cut EDM6.钻孔：drilling7.铰孔：reaming8.螺纹加工：threading9.组装：assembly10.检验：inspection以上是模具术语的中英文对照表，本表可供参考，希望对有需要的读者有所帮助。

模芯Parting Core 耐落胶Teflon Paste局部视图Partial View 偏移量Offset冷料Cold Slag 水塞Water Line Plug线切割Wire E.D.M 撬模脚Ppy Slot轮廓Contour 重新加工Reworked螺纹孔Tapping Hole 配件Components连接件Fittings 补偿Compensation斜针Angle Pin 平面度Parallel接合Engage 倒角Chamfer替换镶件Interchangeable Mold Inserts 模胚Mold Base指定吨位的注塑机Specific Press 热嘴Hotnozzle水嘴接头Water Fitting 火花机Edm螺纹Eyebolt Thread 熔接线Weildline回针Stop Pin 压机Press二级顶出针Sub-Leaderd Pin 嗮纹Texturing镶件Mold Insert 梯形Trapezoid加硬Harden 凸缘、法兰Flange唧嘴Sprue 方铁Spacer Block设计筒图Design Preliminary 顶针板Ejector Plate名称块表Title Block 顶针底板Ejector Retainer Plate版本标识Revision Level 垫板Retainer Plate材料清单Stock List 后模镶针Core Pin制模Build Mold 垃圾钉Stop Pin手动滑块Hand Slide 有托顶针Shoulder Ejector Pin漏水测试Leak Test 顶针板导套Guided Ejection Bushing流道排气Runner Vents 针板导柱Guided Ejection Leader Pin抛光Draw Polish 唧嘴Sprue Bushing侧抽芯Slide Action 三板模延伸式唧嘴Extension Noozzle Bulishing 加强筋Reinforcing 水口板导套Runner Stripper Pin三角撑Gusset 定位圈（法兰）Locating Ring柱子Bossed 管钉（定位销）Dowel Pin出模斜度Draft 管状管钉Tubular Dowel外廊Contour 吊环Safety Hoist Ring落单会议Kick-off 日期印Dating Insert装卸孔Handing Hole 环保印Recycling Insert运输安全带Moldstrap 气顶Air Poppet Valve码模槽Clamp Slot 截水口镶件Runner Shut-Off Insert撑头Support Pillar 早回Early Ejector Return螺牙1/2-13 Eye 1/2-13Tap 加速项Accelerated Ejector导柱位Leader Pin Location 客户Client产品名Part Name 产品编号Part No缩水Shrinkage 版本Rev下模镶件Core Block 上模镶件Cavity Block小镶件Sub-Insert 下模小镶件Core Sub-Insert上模小镶件Core Sub-Insert 行位Slide行位镶件Slide Insert 压条Gib压紧块（铲机）Jaw 扁顶Blade硬片（摩擦片）Wear Plate 出模斜波Draft水口铁Runner Bar 手动滑块模具Hand Slide-In Type Mold 上模水口铁Upper Runner Bar 回针板Backup下模水口铁Lower Runner Bar 合模Shutoff弹簧Spring 空隙槽Clearance Slot水口钩针Sprue Puller Pin 导柱及导套Leader Pin Bushing顶针Ejector Pin 水口拉钩Spuer Puller撑头Support Pillar 模框镶件Pocket Insert直身锁Side Lock 成型热固性塑料模具Thermoset Mold 斜度锁Inter Lock 三板模3-Plat Mold锁模板Safty Bar 分型面Parting Line‘O’令（密封圈）O’Ring 司筒Ejector Sleeve喉塞Plug 垫圈Washer隔水片Baffrle 烙接线（夹水纹）Weldlin波子螺丝（行为定位螺丝）吸针Sucker Pin斜顶Lifter 回针板Retainer Plate控制开关Switch 顶出板Knock-Out Plate回针Return Pin 电动安全开关Electrical-Safety Switch 斜导柱Angle Pin 脱开Cut Of Position推板Stripper Plate 预先决定PreloadA’板A’Plate 缓冲器BumperB’板B’Plate 衬垫Cushion方铁（垫铁）Spacer Block 公差Tolerance顶针板Ejector Plate 突然性动作Slam顶针底板Ejector Retainer Plate 销针Dowel垫板Retainer Plate 钩槽Gib精磨Finished 有托顶针Shoulder Ejector Pin通框Through Window 顶针板导套Guided Ejector Bushing粘后模Stricking Core 针板导柱Guided Ejector Leader Pin粘水口Sticking Sprue 不干胶Adhesive Sticker夹水纹Weld Line 线切割Wire-Cut变形Warpage 电火花Edm走水不平均Filling 抛光Polishing走不齐Short Shot 蚀纹Texture挂成品Part Hanging 探热针Thermocouple漏水Water Leakage 三打螺丝毫（限螺丝）Stripper Bolt 刮花（擦伤）Galling 盖板Cover Plate漏电Ele Leakage 齿轮Gear困气Air Trapping 油唧Hydraulic Cylinder温度Temperature 司筒Ejector Sleeve注塑模Injection Mold 导柱Leader Pin入水Gate 冷料Cold Slag试板Sampling 压力Pressure倒圆Fillet 螺纹孔Tapping Hole顶棍Ejector 连接件Fitting顶白Stress Mark 粘前模Sticking Cav名称块表Title Block 替换镶件Interchangeable Mold Insert版本标识Revision Level 制定吨位的注塑机Specific Press材料清单Stock List 水嘴接头Water Fitting斜导柱（斜边）Angle Pin 螺纹Eyebolt Thread分模面Parting Surface 倒扣Under-Cut披峰Flash 锁定位Lock缩水Sink Mark 楔子（铲机）Wedge氮化Nitride 高产量模量High Volume Running Mold 不规则四边形Trapezoid 剖面图Cross Section缩水Shrinkage 模具结构Mold Construction连续的Consecutive 出模角Draft热流道Manifold 擦位Shut-Off(S/O)型腔数Cav No 导套Bushing模号Mold No 导向针Guide Pin回针Return Pin 胶料Material加硬Harden 尺寸Dimension唧嘴Sprue 重要尺寸Critical Dimension设计筒图Design Preliminary 雕刻Engrave丝印Silkprint 托司EJ.Guide Pin。

上模：Upper Die上模座：Upper die holder下模：Lower die下模座：Lower die bottom环模：Holder die压料板：Pad安全护板：Safety Guard耐磨板：Wearplate吊耳：Hook插入式吊耳：Insert hook搬运固定板：Fix in Plates防呆装置：Fool Proofing快速定位：Quick Clamp安全侧销：Retainer pin sets(Safety) 保管垫块：Blocks平衡垫块：Balancer block停止垫块：Stoper block氮气缸：NiirogenSpring到底记号：Check Buttons镶块：Insert Block素材定位器：Nest Guide进退料支架：SKID Brackets脱料板：Stripper die顶料块：lift block零件详细：Parts detail检具：Checking Fixture气缸：Cylinder接头：Adapter(Augmture)快速接头：Quick Nipple三向接头：Three-Way Connector万向接头：Universal-Joint adapterL型快速接头：L JointT型快速接头：T Joint阀：Valve调速阀：Covernor Valve方向调节阀：Directional Control Valve 定位销：Location Pin开口销：Split Pin带头销：Pin with head固定销：Doweel Pin夹：Clamp管：Pipe连接管：Connector排气孔：Air Vent轴：Shaft连杆轴：Link shaft下模钢块：Lower Steel行程定位：Stroke end block 废料刀：Scrap cutter废料盒：Scrap Box定位键：locating key凸轮组件：Cam Unit凸轮滑动座：Cam Slide凸轮驱动座：Cam driver凸轮侧滑块：Cam side slide 切刀块：Cutter Nlock分块：Sectional Block导柱：Guide Post导套：Guide bush导柱组：Guide Post Set缓冲垫块：Cushion Plate挡板(块)：Baffle垫块：Plate垫圈：Washer焊接：Welding树脂：Resin消音器：Muffle螺帽：Nut有槽螺帽：Slotted Nut销规：Guage承盘：Retainer柱塞：Plunger端子箱：Cable connecting Box集头座：Connector Support内六角螺栓：SHC Screw内螺纹圆柱销：DOWEL PIN吊挂：Retainer Bolt弹簧导销：Spring Guide retainers 工法图：Die layout上模面：Upper die of plan view 下模面：Lower die of plan view 断面：Section冲头：Punch固定块：Fix Plate作用套管：Spool Retainer滚轮：Rubber roller衬套：Bushing冲头固定座：Retainer 盖板：Safety Guard托架：Bracket曲柄：Crank。

"R，L Co.,Ltd" 模具常用术语中英文对照模芯Parting Core局部视图 Partial View冷料# Cold Slag线切割Wire E.D.M轮廊Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts指定吨位的注塑机 Specific Press水嘴接头 Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leaderd Pin镶件Mold Insert加硬Harden 唧嘴Sprue设计筒图Design Preliminary名称块表Title Block版本标识Revision Level 材料清单Stock List制模Build Mold手动滑块Hand Slide漏水测试Leak Test流道排气Runner Vents抛光Draw Polish侧抽芯Side Action加强筋Reinforcing三角撑Gusset柱子Bossed出模斜度Draft外廊Contour落单会议Kick-Off Meeting 装卸孔Handling Hole 运输安全带Moldstrap码模槽Clamp Slot撑头Support Pillar螺牙1/2-13 Eye Bolt 1/2-13Tap导柱位Leader Pin Location耐落胶Teflon Paste偏移量Offset水塞Water Line Plug撬模脚Ppy Slot重新加工 Reworked配件Components补偿Compensation平面度Parallel倒角Chamfer模胚Mold Base热嘴Hotnozzle火花机Edm熔接线Weildline压机Press晒纹Texturing梯形Trapezoid 凸缘、法兰Flange方铁Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate后模镶针Core Pin拉圾钉Stop Pin有托顶针Shoulder Ejector Pin顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing水口板导套Runner Stripper Plate Bushing定位圈（法兰）Locating Ring管钉（定位销）Dowel Pin管状管钉Tubular Dowel 吊环Safety Hoist Ring 日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件RunnerShut-Off Insert早回Early Ejector Return加速项Accelerated Ejector客户Client产品名Part Name产品编号 Part No缩水Shrinkage版本Rev模胚Mold Base下模镶件 Core Block上模镶件 Cavity Block小镶件Sub-Insert下模小镶件Core Sub-Insert上模小镶件CavitySub-Insert行位Slide行位镶件Slide Insert压条Gib压紧块（铲机）Jaw硬片（摩擦片）Wear Plate水口铁Runner Bar上模水口铁Upper Runner Bar下模水口铁Lower Runner Bar弹簧Spring水口勾针Sprue Puller Pin顶针Ejector Pin撑头Support Pillar直身锁Side Lock斜度锁Interlock锁模板Safety Bar‘O’令（密封圈）O'Ring喉塞Plug隔水片Baffle波子螺丝（行位定位螺丝）Ball-Catch斜顶Lifter控制开关 Switch回针Return Pin斜导柱Angle Pin推板Stripper PlateA’板A'PlateB’板B'Plate方铁（垫铁）Spacer Block 顶针板Ejector Plate顶针底板 Ejector Retainer Plate垫板Retainer Plate垃圾钉Stop Pin有托顶针Shoulder Ejector Pin顶针板导套Guided Ejection Bushing针板导柱 Guided Ejection Leader Pin唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing水口板导套Runner Stripper Plate Bushing定位圈（法兰）Locating Ring管钉（定位销）Dowel Pin 管状管钉Tubular Dowel 吊环Safety Hoist Ring 日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件RunnerShut-Off Insert早回Early Ejector Return加速顶Accelerated Ejector扁顶Blade出模斜波 Draft手动滑块模具HandSlide-In Type Mold回针板Backup合模Shutoff空隙槽Clearance Slot导柱及导套Leader Pin Bushing水口拉钩 Spuer Puller模框镶件 Pocket Insert成型热固性塑胶模具Thermoset Mold三板模3-Plat Mold分型面Parting Line司筒Ejector Sleeve垫圈Washer熔接线（夹水纹）Weldline 吸针Sucker Pin回针板Retainer Plate顶出板Knock -Out Plate 电动安全开关Electrical-Safety Switch 脱开Cut Of Position预先决定Preload缓冲器Bumper衬垫Cushion公差Tolerance突然性动作Slam销针Dowel钩槽Gib精磨Finished通框Through Window 粘后模Sticking Core 粘水口Sticking Sprue 夹水纹Weld Line变形Warpage走水不平均Filling Uneven走不齐Short Shot 挂成品Part Hanging 漏水Water Leakage 刮花（擦伤）Galling漏电Ele Leakage困气Air Trapping温度Temperature注塑模Injection Mold 入水Gate试板Sampling压力Pressure倒圆Fillet顶棍Ejector顶白Stress Mark粘前模Sticking Cav 名称块表 Title Block版本标识 Revision Level材料清单 Stock List斜导柱（斜边）Angle Pin A板A'plateB板B'plate倒扣Under-Cut披峰Flash缩水Sink Mark氮化Nitride不规则四边形Trapezoid缩水Shrinkage连续的Consecutive 雕刻Engrave出模角Draft分模面Parting Surface 擦位Shut-Off(S/0)导套Bushing回针Return Pin加硬Harden唧嘴Sprue设计筒图Design Preliminary丝印Silkprint不干胶Adhesive Sticker导向针Guide Din公差Tolerance线切割Wire-Cut电火花Edm抛光Polishing蚀纹Texture探热针Thermocouple 三打螺丝毫（限螺丝）Stripper Bolt盖板Cover Plate齿轮Gear油唧Hydraulic Cylinder司筒Ejector Sleeve导柱Leader Pin冷料# Cold Slag线切割Wire E.D.M.轮廓Contour螺纹孔Tapping Hole 连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts指定吨位的注塑机 Specific Press水嘴接头 Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leader Pin 镶件Mold Insert 锁定位Lock楔子(铲鸡) Wedge高产量模量High Volume Running Mold剖面图Cross Section 模具结构Mold Construction 模芯Parting Core局部视图Partial View热流道Manifold热嘴Hot Nozzle型腔数Cav No模号Mold No胶料Material尺寸Dimension重要尺寸Critical Dimension 雕刻Engrave托司EJ.GUIDE PIN。

AD-Diameter The tread diameter at the centerline of the tread (EU); also: "T-Diameter"(GT) AD直径：指胎面中心线直径（EU）。

又叫T直径（GT）Auto-lock Ear A Lug on the cone ring used to mount the mold/container in the top half of a60“ NRM Auto-lock press.导环上的突缘，用于和60“ NRM Auto-lock 硫化机上半部连接。

Bead Ring The tire bead forming ring (also: toe ring)钢圈，也称toe ringBead Ring Register The landing and tapered seat that the bead ring fits into钢圈配合：侧板上，和钢圈配合的平面及锥面Bottom Container Plate The plate that the bottom sidewall plate is bolted to模壳底座Bottom Container Plate Lifting Lug A lug attached to the Bottom Container Plate with Horizontal holes used for lifting.模壳底座吊耳：装配在底座上、有水平的孔，用来吊装的吊耳Bottom Container Plate Dowel Pin Lug A lug attached to the Bottom Container Plate that supports the Dowel Pin Bushing.装配在底座上，用来支承定位销套的突缘Bottom Container Plate Hold Down A lug that is used to fix the Bottom Plate in the Press.用来将底座装配在硫化机上的突缘Breaker Hook A hook fixed to the bottom of the tread segment that catches the bottom container plate only when the segment will not release from the tire during de-molding.分离钩：固定在花纹块底部的钩子，轮胎硫化完后若花纹块不能跟轮胎分离，就用此钩抓住模壳底座帮助花纹块和轮胎进行分离。