当前位置：文档之家 › P6SMAFJ5.0CA,600W贴片超薄性TVS瞬变抑制二极管

P6SMAFJ5.0CA,600W贴片超薄性TVS瞬变抑制二极管

  • 格式：pdf
  • 大小：932.58 KB
  • 文档页数：5

P6SMAFJ5.0A(CA) - P6SMAFJ440A(CA)VOLTAGE RANGE: 5.0 - 440 VPOWER: 600Wa t Maximum Ratings@ T A = 25°C unless otherwise specifiedNotes:1. Valid provided that terminals are kept at ambient temperature.2. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum.3. Unidirectional units only.SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODEGlass Passivated Die ConstructionUni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response TimePlastic Material: UL Flammability Classification Rating 94V-0Features!!!!!Polarlty : Color band denotes cathode end Weight:0.0011 ounces , 0.0328 gramsMethod2026Terminals: Solder plated,solderable per MIL-STD,Case:SMAF, PlasticSee Page 2Mechanical DataMarking: Date Code and Marking Code!!!!!Dimensions in inches and (millimeters)SMAFP6SMAFJ7.0CA P6SMAFJ7.5C P6SMAFJ7.5 P6SMAFJ7.0A P6SMAFJ7.0C P6SMAFJ7.0 P6SMAJ6.5CA P6SMAFJ6.5A P6SMAFJ6.5 P6SMAFJ6.0A P6SMAFJ6.5C P6SMAFJ6.0CA P6SMAFJ6.0C P6SMAFJ6.0 P6SMAJ5.0CA P6SMAJ5.0A P6SMAFJ5.0C P6SMAFJ5.0 9.09.08.07.57.56.56.05.028.926.720.016.711.1 1.01.0(BI)(Uni)Breakdown Marking ReverseStand-Off VoltageVoltage Min. @I TBreakdown Voltage Max. @ I TTestCurrent Maximum Clamping Voltage @I PPPeak Pulse Current Reverse Leakage @V RMW (Uni) (Bi) V RMW (V) V BR MIN (V) V BR MAX (V)I T (mA)V C (V) I PP (A) I R(uA) KD AD 5.0 6.40 7.55 10 9.6 62.5 800.0 KE AE 6.40 7.25 10 9.2 65.2 800.0 KF AF 6.67 8.45 10 11.4 52.6 800.0 KG AG 6.0 6.67 7.67 10 10.3 58.3 800.0 KH AH 6.5 7.22 9.14 10 12.3 48.8 500.0 KK AK 7.22 8.30 10 11.2 53.6 500.0 KL AL 7.0 7.78 9.86 10 13.3 45.1 200.0 KM AM 7.0 7.78 8.95 10 12.0 50.0 200.0 KN AN 8.33 10.67 1.0 14.3 42.0 100.0 P6SMAFJ7.5CA KP AP 8.33 9.58 1.0 12.9 46.5 100.0 P6SMAFJ8.0 P6SMAFJ8.0C KQ AQ 8.89 11.3 1.0 15.0 40.0 50.0 P6SMAFJ8.0A P6SMAFJ8.0CA KR AR 8.0 8.89 10.23 13.6 44.1 50.0 P6SMAFJ8.5 P6SMAFJ8.5C KS AS 8.5 9.44 11.92 1.0 15.9 37.7 20.0 P6SMAFJ8.5A P6SMAFJ8.5CA KT AT 8.5 9.44 10.82 14.4 41.7 20.0 P6SMAFJ9.0 P6SMAFJ9.0C KU AU 10.0 12.6 1.0 16.9 35.5 10.0 P6SMAFJ9.0A P6SMAFJ9.0CA KV AV 10.0 11.5 1.0 15.4 39.0 10.0 P6SMAFJ10 P6SMAFJ10C KW AW 10 14.1 1.0 18.8 31.9 5.0 P6SMAFJ10A P6SMAFJ10CA KX AX 10 11.1 12.8 1.0 17.0 35.3 5.0P6SMAFJ11 P6SMAFJ11C KY AY 11 12.2 15.4 1.0 20.1 29.9 5.0P6SMAFJ11A P6SMAFJ11CA KZ AZ 1112.2 14.0 1.0 18.2 33.0 5.0P6SMAFJ12 P6SMAFJ12C LD BD 12 13.3 16.9 1.0 22.0 27.3 5.0 P6SMAFJ12A P6SMAFJ12CA LE BE 12 13.3 15.3 1.0 19.9 30.2 5.0P6SMAFJ13 P6SMAFJ13C LF BF 13 14.4 18.2 1.0 23.8 25.2 5.0P6SMAFJ13A P6SMAFJ13CA LG BG 13 14.4 16.5 1.0 21.5 27.9 5.0P6SMAFJ14C LHBH 14 15.6 19.8 1.0 25.8 23.3 5.0 P6SMAFJ14CA LK BK 14 15.6 17.9 1.0 23.2 25.9 5.0P6SMAFJ14 P6SMAFJ14A P6SMAFJ15 P6SMAFJ15C LL BL 15 21.1 1.0 26.9 22.3 5.0P6SMAFJ15A P6SMAFJ15CA LM BM 15 16.7 19.2 1.0 24.4 24.6 5.0P6SMAFJ16 P6SMAFJ16C LN BN 16 17.8 22.6 1.0 28.8 20.8 5.0 P6SMAFJ16A P6SMAFJ16CA LP BP 16 17.8 20.5 1.0 26.0 23.1 5.0P6SMAFJ17 P6SMAFJ17C LQ BQ 17 18.9 23.9 1.0 30.5 19.7 5.0P6SMAFJ17A P6SMAFJ17CA LR BR 17 18.9 21.7 1.0 27.6 21.7 5.0P6SMAFJ18 P6SMAFJ18C LS BS 18 25.3 1.0 32.2 18.6 5.0 P6SMAFJ18A P6SMAFJ18CA LT BT 18 20.0 23.3 1.0 29.2 20.5 5.0P6SMAFJ20 P6SMAFJ20C LU BU 20 22.2 28.1 1.0 35.8 16.8 5.0P6SMAFJ20A P6SMAFJ20CA LV BV 20 22.2 25.5 1.0 32.4 18.5 5.0P6SMAFJ22 P6SMAFJ22C LW BW 22 24.4 30.9 1.0 39.4 15.2 5.0 P6SMAFJ22A P6SMAFJ22CA LX BX 22 24.4 28.0 1.0 35.5 16.9 5.0P6SMAFJ24 P6SMAFJ24C LY BY 24 33.8 1.0 43.0 14.0 5.0P6SMAFJ24A P6SMAFJ24CA LZ BZ 24 26.7 30.7 1.0 38.9 15.4 5.0P6SMAFJ26 P6SMAFJ26C MD CD 26 36.6 1.0 46.6 12.9 5.0 P6SMAFJ26A P6SMAFJ26CA ME CE 26 28.9 33.2 1.0 42.1 14.3 5.0TYPEP6SMAFJ28 P6SMAFJ28C MF CF 28 31.1 39.4 1.0 50.0 12.0 5.0P6SMAFJ28A P6SMAFJ28CA MG CG 28 31.1 35.8 1.0 45.4 13.2 5.0Note:( 1 ) V BR measured after I T applied for 300 µs., I T= square wave pulse or equivalent. ( 2 ) Surge Current Waveform per Figure 5 and Derate per Figure 1( 3 ) A Transient suppressor is normally selected according to the reverse " Stand-off Voltage " (V WM ) which should be equal to or greater then the D.C. or continuous peak operating voltage level.P6SMAFJ7.5A83.077.871.166.756.753.350.096.893.687.182.477.472.769.4100(BI)(Uni)Breakdown Marking Reverse Stand-Off Voltage Voltage Min. @I T Breakdown Voltage Max. @ I T TestCurrentMaximum Clamping Voltage @I PPPeak Pulse Current Reverse Leakage @V RMW(Uni) (Bi)V RMW (V) V BR MIN (V)V BR MAX (V)I T (mA)V C (V) I PP (A) I R (uA) P6SMAFJ43A P6SMAFJ43CA MT CT 43 47.8 54.9 1.0 8.6 5.0P6SMAFJ45 P6SMAFJ45C MU CU 45 63.3 1.0 80.3 7.5 5.0P6SMAFJ45A P6SMAFJ45CA MV CV 45 50.0 57.5 1.0 8.3 5.0P6SMAFJ48 P6SMAFJ48C MW CW 48 67.5 1.0 85.5 7.0 5.0 P6SMAFJ48A P6SMAFJ48CA MX CX 48 53.3 61.3 1.0 7.8 5.0P6SMAFJ51 P6SMAFJ51C MY CY 51 71.8 1.0 91.1 6.6 5.0P6SMAFJ51A P6SMAFJ51CA MZ CZ 51 56.7 65.2 1.0 7.3 5.0P6SMAFJ54 P6SMAFJ54C ND DD 54 60.0 76.0 1.0 96.3 6.2 5.0P6SMAFJ54A P6SMAFJ54CA NE DE 54 60.0 69.0 1.0 6.9 5.0P6SMAFJ58 P6SMAFJ58C NF DF 58 64.4 81.6 1.0 103 5.8 5.0P6SMAFJ58A P6SMAFJ58CA NG DG 58 64.4 74.1 1.0 6.4 5.0P6SMAFJ60 P6SMAFJ60C NH DH 60 84.5 1.0 107 5.6 5.0 P6SMAFJ60A P6SMAFJ60CA NK DK 60 66.7 76.7 1.06.2 5.0P6SMAFJ64 P6SMAFJ64C NL DL 64 90.1 1.0 114 5.3 5.0P6SMAFJ64A P6SMAFJ64CA NM DM 64 71.1 81.8 1.0 103 5.8 5.0P6SMAFJ70 P6SMAFJ70C NN DN 70 98.6 1.0 125 4.8 5.0 P6SMAFJ70A P6SMAFJ70CA NP DP 70 77.8 89.5 1.0 113 5.3 5.0P6SMAFJ75 P6SMAFJ75C NQ DQ 75 83.0 105.7 1.0 134 4.5 5.0P6SMAFJ75A P6SMAFJ75CA NR DR 75 95.8 1.0 121 5.0 5.0P6SMAFJ90 P6SMAFJ90C NW DW 90 100 126.5 1.0 160 3.8 5.0P6SMAFJ90A P6SMAFJ90CA NX DX 90 100 115.5 1.0 146 4.1 5.0P6SMAFJ100 P6SMAFJ100C NY DY100 111 141.0 1.0 179 3.4 5.0P6SMAFJ100AP6SMAFJ100CA NZ DZ 100 111 128.0 1.0 162 3.7 5.0P6SMAFJ110 P6SMAFJ110C PD ED110 122 154.5 1.0 196 3.1 5.0P6SMAFJ110A P6SMAFJ110CA PE EE 1122 140.5 1.0 177 3.4 5.0P6SMAFJ120 P6SMAFJ120C PF EF 120 133 169.0 1.0 214 2.8 5.0P6SMAFJ120A P6SMAFJ120CA PG EG 120 133 153.0 1.0 193 3.1 5.0P6SMAFJ130 P6SMAFJ130C PH EH 130 144 182.5 1.0 231 2.6 5.0 P6SMAFJ130A P6SMAFJ130CA PK EK 130144 165.5 1.0 209 2.9 5.0P6SMAFJ150 P6SMAFJ150C PL EL 150 167 211.5 1.0 268 2.2 5.0P6SMAFJ150A P6SMAFJ150CA PM EM 150 167 192.5 1.0 243 2.5 5.0P6SMAFJ160 P6SMAFJ160C PN EN 160 178 226.0 1.0 287 2.1 5.0 P6SMAFJ160A P6SMAFJ160CA PP EP160 178205.0 1.0 259 2.3 5.0TYPE44.444.440.036.733.3P6SMAFJ30 P6SMAFJ30C MH CH30 42.2 1.0 53.5 11.2 5.0 P6SMAFJ30A P6SMAFJ30CA MK CK 30 33.3 38.3 1.0 48.4 12.4 5.0P6SMAFJ33 P6SMAFJ33C ML CL 33 36.7 46.5 1.0 59.0 10.2 5.0P6SMAFJ33A P6SMAFJ33CA MM CM 33 42.2 1.0 53.3 11.3 5.0P6SMAFJ36C P6SMAFJ36 MN CN 36 50.7 1.0 64.3 9.3 5.0 P6SMAFJ36A P6SMAFJ36CA MP CP 36 40.0 46.0 1.0 58.1 10.3 5.0P6SMAFJ40 P6SMAFJ40C MQ CQ 40 56.3 1.0 71.4 8.4 5.0P6SMAFJ40A P6SMAFJ40CA MR CR 40 51.1 1.0 64.5 9.3 5.0Note:( 1 ) V BR measured after I T applied for 300 µs., I T = square wave pulse or equivalent. ( 2 ) Surge Current Waveform per Figure 5 and Derate per Figure 1( 3 ) A Transient suppressor is normally selected according to the reverse " Stand-off Voltage " (V WM ) which should be equal to or greater then the D.C. or continuous peak operating voltage level.P6SMAFJ78 P6SMAF78C NS DS 78 86.0 109.8 1.0 139 4.3 5.0 P6SMAFJ78A P6SMAFJ78CA NT DT 78 86.0 99.7 1.0 126 4.8 5.0P6SMAFJ85 P6SMAFJ85CNU DU 8594.0 119.2 1.0 151 4.0 5.0P6SMAFJ85A P6SMAFJ85CA NV DV 8594.0 108.2 1.0 137 4.4 5.0(BI)(Uni)Breakdown Marking Reverse Stand-Off VoltageVoltage Min. @I T Breakdown Voltage Max. @ I T TestCurrent Maximum Clamping Voltage @I PPPeak Pulse Current Reverse Leakage @V R MW (Uni) (Bi)V RMW (V)V BR MIN (V)V BR MAX (V)I T (mA)V C (V) I PP (A) I R (uA) P6SMAFJ190 P6SMAFJ190C PU EU 190 211 267.9 1.0 339 1.8 5.0P6SMAFJ190A P6SMAFJ190CA PV EV 190 211 243.2 1.0 306 2.0 5.0P6SMAFJ200 P6SMAFJ200C PW EW 200 222 282.0 1.0 356 1.7 5.0 P6SMAFJ200A P6SMAFJ200CA PX EX200 222 256.0 1.0 322 1.9 5.0P6SMAFJ210P6SMAFJ210C PY EY 210 233296.1 1.0 375 1.6 5.0P6SMAFJ210A P6SMAFJ210CA PZ EZ 210 233 268.8 1.0 339 1.8 5.0P6SMAFJ220 P6SMAFJ220C QD FD 220 244 310.2 1.0 392 1.5 5.0 P6SMAFJ220A P6SMAFJ220CA QE FE 220 244 281.6 1.0 355 1.7 5.0P6SMAFJ250 P6SMAFJ250C QF FF 250 278 342.5 1.0 447 1.3 5.0P6SMAFJ250A P6SMAFJ250CA QG FG 250 278 309.0 1.0 403 1.5 5.0P6SMAFJ300 P6SMAFJ300C QH FH 300 333 411.0 1.0 535 1.1 5.0 P6SMAFJ300A P6SMAFJ300CA QK FK 300 333 371.0 1.0 484 1.2 5.0P6SMAFJ350 P6SMAFJ350C QL FL 350 389 479.5 1.0 624 1.0 5.0P6SMAFJ350A P6SMAFJ350CA QM FM 350 389 432.0 1.0 565 1.1 5.0P6SMAFJ400 P6SMAFJ400C QN FN 400 444 548.0 1.0 687 0.9 5.0 P6SMAFJ400A P6SMAFJ400CA QP FP 400 444 494.0 1.0 645 0.9 5.0P6SMAFJ440 P6SMAFJ440C QQ FQ 440 489 602.8 1.0 786 0.8 5.0P6SMAFJ440A P6SMAFJ440CA QR FR440 489543.0 1.0 710 0.8 5.0TYPEP6SMAFJ180 P6SMAFJ180C PS ES 180200253.8 1.0 321 1.9 5.0P6SMAFJ180A P6SMAFJ180CA PT ET 180 200230.4 1.0 290 2.1 5.0P6SMAFJ170 P6SMAFJ170C PQ EQ 170 189 239.5 1.0 304 2.0 5.0P6SMAFJ170A P6SMAFJ170CA PR ER 170 189 217.5 1.0 275 2.2 5.0Ratings and Characteristic Curves T A=25°C unless otherwise noted。

合集下载

双向瞬态抑制TVS二极管型号大全

双向瞬态抑制TVS二极管型号大全

双向瞬态抑制TVS⼆极管型号⼤全过电压防浪涌保护器件TVS瞬态电压抑制⼆极管，是⼀种⾼效新型的电路保护元件，凭借其⾃⾝独有的优势：半导体⼯艺、稳定可靠、玻璃钝化⼯艺、导通电压精准、PS秒级响应速度、瞬态功率⼤、击穿电压偏差⼩、低漏电流、低动态内阻、箝位电压易控制、封装形式多样、⼩体积易安装等等，被⼴泛应⽤于敏感电⼦产品中，如汽车电⼦、⼯业设备、通讯设备、消防电⼦、家电等等。

TVS⼆极管种类很多，根据⽅向可分为单向TVS和双向TVS；根据极性可分为单极性TVS和双极性TVS；根据外形可分为贴⽚TVS和直插TVS；根据功率可分为⼤功率TVS和⼩功率TVS……接下来，TVS⼆极管⼚家东沃电⼦DOWOSEMI重点要分享的是有关双向TVS⼆极管的话题。

双向TVS⼆极管和单向TVS有什么区别呢？如何区分双向TVS⼆极管？双向TVS⼆极管型号有哪些？双向TVS⼆极管和单向TVS⼆极管的区别单向和双向TVS管伏安特性曲线和相关参数说明如下图：从上图可以看出，双向TVS⼆极管伏安特性曲线在第⼀象限与第三象限极性相反，特性相似、当单向TVS⼆极管反向偏置时，它有两种⼯作模式：待机（⾼阻抗）或钳制（相对的低阻抗），详见单向TVS⼆极管伏安特性曲线第三象限。

在应⽤⽅⾯的区别，⼀般⽽⾔，单向TVS应⽤在直流电路中，双向TVS应⽤在交流电路中，具体详情建议咨询专业的技术员。

如何区分双向TVS⼆极管？双向：bi-directional unit，简称Bi；单向：uni-directional unit，简称Uni。

关于TVS⼆极管如何区分单双向这个问题，最可靠的⽅法就是查看对应料号的产品⼿册，其中Bi列表中表⽰的是单向，Uni列表中表⽰的是双向。

当然还可以根据型号更直观地辨别，TVS⼆极管型号尾缀CA是双向，A的话是单向，如3KP33CA是双向TVS⼆极管，3KP33A是单向TVS。

当然，不同品牌供应商对TVS⼆极管型号命名⽅式还是略有差异的，⼀般⽽⾔，都是国标统⼀的型号，不会存在太⼤的差异。

P6KE350A,TVS瞬变抑制二极管中文资料

P6KE350A,TVS瞬变抑制二极管中文资料

POWER: 600Wa t VOLTAGE RANGE: 6.8 - 440VP6KE6.8A(CA)-P6KE440A(CA)Classification Rating 94V-OFeaturesGlass Passivated Die ConstructionUni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response TimePlastic Case Material has UL Flammability Mechanical DataCase: JEDEC DO-15 Low Profile Molded Plastic Terminals: Axial Leads, Solderable per MIL-STD-202, Method 208Polarity: Cathode Band or Cathode Notch Weight: 0.40 grams (approx.)Maximum Ratings and Electrical Characteristics@T A =25°C unless otherwise specifiedCharacteristicSymbol ValueUnit Peak Pulse Power Dissipation at T A = 25°C (Note 1, 2, 5) Figure 3P PPM 600 MinimumW Peak Forward Surge Current (Note 3)I FSM 100A Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 1I PPM See Table 1A Steady State Power Dissipation (Note 2, 4)P M(AV) 5.0W Operating and Storage Temperature RangeT j , T STG-65 to +175°CNote: 1. Non-repetitive current pulse, per Figure 1 and derated above T A = 25°C per Figure 4.2. Mounted on 40mm 2 copper pad.3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum.4. Lead temperature at 75°C = T L .5. Peak pulse power waveform is 10/1000µS.AXIAL LEADED TRANSIENT VOLTAGE SUPPERSSOR DIODE!!!!!!!!P6KE440CA10.5 14.513.412.186.577.971.364.658.953.248.544.740.934.231.428.525.722.820.919.017.115.214.312.49.508.657.797.136.45(uA)R RMW RMW@V leakage Reverse CurrentPulse Peak (A)Vc(V)(mA)BR MAX CurrentMax.BR MIN @I Min.Volgtage Breakdown (V)(BI)(Uni)Voltage Stand-Off Reverse Maximum Clamping V T PP(V)V @I Volgtage Breakdown Test (V)V T Volgtage @I PP P6KE6.8A P6KE6.8CA 5.80 7.14 10.0 57.1 1000.0P6KE7.5A P6KE7.5CA 6.40 7.88 10.0 11.3 53.1 500.0 P6KE8.2A P6KE8.2CA 7.028.61 10.0 49.6 200.0 P6KE9.1A P6KE9.1CA 7.78 9.55 1.0 44.8 50.0 P6KE10A P6KE10CA 8.55 10.5 1.0 41.4 10.0P6KE11A P6KE11CA 9.40 10.5 11.6 1.0 15.6 38.5 5.0 P6KE12A P6KE12CA10.2 11.412.6 1.0 16.7 35.9 5.0P6KE13A P6KE13CA11.1 13.7 1.0 18.2 33.0 5.0 P6KE15A P6KE15CA 12.8 15.8 1.0 21.2 28.3 5.0 P6KE16A P6KE16CA 13.6 16.8 1.0 22.5 26.7 5.0P6KE18A P6KE18CA 15.3 18.9 1.0 25.2 23.8 5.0 P6KE20A P6KE20CA 17.1 21.0 1.0 27.7 21.7 5.0 P6KE22A P6KE22CA 18.8 23.1 1.0 30.6 19.6 5.0 P6KE24A P6KE24CA 20.5 25.2 1.0 33.2 18.1 5.0 P6KE27A P6KE27CA 23.1 28.4 1.0 37.5 16.0 5.0 P6KE30A P6KE30CA 25.6 31.5 1.0 41.4 14.5 5.0 P6KE33A P6KE33CA 28.2 34.7 1.0 45.7 13.1 5.0P6KE36A P6KE36CA 30.8 37.8 1.0 49.9 12.0 5.0P6KE39A P6KE39CA 33.3 37.1 41.0 1.0 53.9 11.1 5.0 P6KE43A P6KE43CA 36.8 45.2 1.0 59.3 10.1 5.0 P6KE47A P6KE47CA 40.2 49.4 1.0 64.8 9.3 5.0 P6KE51A P6KE51CA 43.6 53.6 1.0 70.1 8.6 5.0P6KE56A P6KE56CA 47.8 58.8 1.077.0 7.8 5.0P6KE62A P6KE62CA 53.0 65.1 1.0 85.07.1 5.0 P6KE68A P6KE68CA 58.1 71.4 1.0 92.06.5 5.0 P6KE75A P6KE75CA 64.1 78.81.0 103 5.8 5.0P6KE82A P6KE82CA70.1 86.1 1.0 1135.3 5.0P6KE91A P6KE91CA 77.8 95.5 1.0 1254.85.0 P6KE100A P6KE100CA 85.5 95.0 105 1.0 137 4.4 5.0 P6KE110AP6KE110CA 94.0 105 116 1.0 1523.9 5.0 P6KE120AP6KE120CA102 114 126 1.0 165 3.6 5.0 P6KE130A P6KE130CA 111 124 137 1.0 179 3.4 5.0 P6KE150A P6KE150CA 128 143 158 1.0 207 2.9 5.0 P6KE160A P6KE160CA 136 152168 1.0 219 2.7 5.0 P6KE170A P6KE170CA 145 162 179 1.0 234 2.6 5.0 P6KE180A P6KE180CA 154 171 189 1.0 246 2.4 5.0 P6KE200A P6KE200CA 171 190 210 1.0 274 2.2 5.0 P6KE220A P6KE220CA 185 209 231 1.0 328 1.8 5.0 P6KE250A P6KE250CA 214 237 263 1.0 344 1.7 5.0 P6KE300A P6KE300CA 256 285 315 1.0 414 1.4 5.0 350 310 380 P6KE350A P6KE350CA 1.0 482 1.2 5.0 P6KE400A P6KE400CA 342 380 420 1.0 548 1.1 5.0 P6KE440A 3764184621.06021.05.0TYPERating at = 25 °C ambient temperature unless otherwise specified255075100125150175200100755025T ,AMBIENT TEMPERATURE (°C)Fig.4Pulse Derating CurveA P K P U L S E D E R A T I N G (%P K P W R O R C U R R E N T )25507510012515017520002.55.0T ,LEAD TEMPERATURE (°C)Fig.5,Steady State Power DeratingLP ,S T E A D Y S T A T E P O W E R D I S S I P A T I O N (W )d 0.11.0T ,PULSE WIDTH (µs)Fig.3Pulse Rating Curvep 0.1101001.010100100010000P ,P E A K P U L S E P O W E R (k W )P0123I ,P E A K P U L S E C U R R E N T (%)P p pt,TIME (ms)Fig.1Pulse Waveform110100100010100100010,000V ,REVERSE STANDOFF VOLTAGE (V)Fig.2Typical Junction CapacitanceRWM C ,C A P A C I T A N C E (p F )j。

tvs二极管型号

tvs二极管型号

tvs二极管型号TVS二极管型号引言TVS（Transient Voltage Suppressor）二极管是一种用来保护电路免受过电压冲击的特殊二极管。

在电子设备和电路中，电压的突然变化可能会对电路元件和系统造成严重的损害。

TVS二极管旨在通过瞬时吸收过大的电压和电流，从而限制过电压在设备内部的传播。

本文将介绍一些常见的TVS二极管型号，以及其特点和应用领域。

一、SMAJ系列SMAJ系列是一种非常常见的TVS二极管型号，它具有以下特点：1. 反向工作电压范围广：SMAJ系列的反向工作电压范围从5V到440V不等，可以满足不同电路和系统的需求。

2. 低反向漏电流：SMAJ系列的反向漏电流在几个微安到几十个微安之间，可以确保电路的稳定性。

3. 高响应速度：SMAJ系列的响应时间非常快，通常为纳秒级，可以提供有效的过电压保护。

SMAJ系列的应用非常广泛，例如电源供应器、通信设备、工业控制系统等。

二、P6KE系列P6KE系列是另一种常见的TVS二极管型号，它具有以下特点：1. 高浪涌能量吸收能力：P6KE系列的浪涌能量吸收能力通常在600W到1500W之间，可以有效地吸收过电压的能量，保护电路和设备不受损坏。

2. 低反向耗尽电流：P6KE系列的反向耗尽电流在几个微安到几十个微安之间，有助于提高电路的可靠性和稳定性。

3. 多种封装形式：P6KE系列有多种封装形式可供选择，例如DO-15、DO-201、DO-204等，便于在不同的电路板上安装和使用。

P6KE系列常用于电子设备、汽车电子、医疗设备等领域。

三、1.5KE系列1.5KE系列是一种高功率TVS二极管型号，适用于需要大功率过电压保护的应用。

其特点包括：1. 大功率耗尽能力：1.5KE系列的耗尽能力通常在1500W到5000W之间，可以吸收大量的过电压能量。

2. 高响应速度：1.5KE系列的响应时间通常为纳秒级，可以迅速识别并吸收过电压。

3. 多种反向工作电压选择：1.5KE系列提供不同反向工作电压供选择，满足各种应用的需要。

TVS二极管P6KE-600W系列规格书 JKSEMI

TVS二极管P6KE-600W系列规格书 JKSEMI

P6KE Series 600W Transient Voltage SuppressorDESCRIPTION:The P6KE series of high current uni/bi-directional transient suppressors are designed for A.C.line protection and high power DC bus clamping applications.These devices offer uni/bi-directional port protection from 6.8volts to 400volts.They provide a clamping voltage lower than the avalanche voltage.Therefore,any voltage rise due to increased current conduction is contained to a minimum,providing the best possible protection level.They can also be connected in series and/or parallel to create very high capacity protection solutions.FEATURES:✧Low zener impedance.✧Excellent clamping capability.✧Repetition rate (duty cycle):0.01%.✧JEDEC DO-15/DO-204AC Molded Plastic.✧Color band denoted cathode except bidirectional .✧High temperature soldering:260℃/10s at terminals.✧Glass passivated or plannar chip junction in DO-15/DO-204AC package.✧600W Peak Pulse power capability at 10×1000μs waveform.✧Fast response time:typically less than 1.0ps from 0V to V BR min.ABSOLUTE MAXIMUM RATINGS (T A =25ºC,RH=45%-75%,unless otherwise noted)ParameterSymbol Value Unit Peak pulse power dissipation on 10/1000μs waveformP PP 600W Peak pulse current of on 10/1000μs waveformI PP See next tableA Steady state power dissipation at T L =75℃P M(AV) 5.0W Operating junction and Storage temperature rangeT STG,T J -55to +150℃Peak forward surge current,8.3ms single half sine-waveI FSM100ASymbolELECTRICAL CHARACTERISTICS(T A=25℃)Part Number V R I R@V R V BR@I T I T V C@I PP I PP①Uni-Polar Bi-Polar VμA min(V)max(V)mA max(V)A P6KE6.8A P6KE6.8CA 5.8150 6.457.141010.557.2 P6KE7.5A P6KE7.5CA 6.41007.137.881011.353.1 P6KE8.2A P6KE8.2CA7.02507.798.611012.149.6 P6KE9.1A P6KE9.1CA7.78208.659.55113.444.8 P6KE10A P6KE10CA8.55109.5010.50114.541.4 P6KE11A P6KE11CA9.4510.5011.60115.638.5 P6KE12A P6KE12CA10.2211.4012.60116.736 P6KE13A P6KE13CA11.1112.4013.70118.233 P6KE15A P6KE15CA12.8114.3015.80121.228.3 P6KE16A P6KE16CA13.6115.2016.80122.526.7 P6KE18A P6KE18CA15.3117.1018.90125.223.8 P6KE20A P6KE20CA17.1119.0021.00127.721.7 P6KE22A P6KE22CA18.8120.9023.10130.619.7 P6KE24A P6KE24CA20.5122.8025.20133.218.1 P6KE27A P6KE27CA23.1125.7028.40137.516 P6KE30A P6KE30CA25.6128.5031.50141.414.5 P6KE33A P6KE33CA28.2131.4034.70145.713.2 P6KE36A P6KE36CA30.8134.2037.80149.912.1 P6KE39A P6KE39CA33.3137.1041.00153.911.2 P6KE43A P6KE43CA36.8140.9045.20159.310.2 P6KE47A P6KE47CA40.2144.7049.40164.89.3 P6KE51A P6KE51CA43.6148.5053.60170.18.6 P6KE56A P6KE56CA47.8153.2058.80177.07.8 P6KE62A P6KE62CA53.0158.9065.10185.07.1 P6KE68A P6KE68CA58.1164.6071.40192.0 6.6 P6KE75A P6KE75CA64.1171.3078.801103.0 5.9 P6KE82A P6KE82CA70.1177.9086.101113.0 5.4 P6KE91A P6KE91CA77.8186.5095.501125.0 4.8 P6KE100A P6KE100CA85.5195.00105.01137.0 4.4 P6KE110A P6KE110CA94.01105.0116.01152.0 4.0ELECTRICAL CHARACTERISTICS(T A=25℃,continued)Part Number V R I R@V R V BR@I T I T V C@I PP I PP①Uni-Polar Bi-Polar VμA min(V)max(V)mA max(V)A P6KE120A P6KE120CA102.01114.0126.01165.0 3.7 P6KE130A P6KE130CA111.01124.0137.01179.0 3.4 P6KE150A P6KE150CA128.01143.0158.01207.0 2.9 P6KE160A P6KE160CA136.01152.0168.01219.0 2.8 P6KE170A P6KE170CA145.01162.0179.01234.0 2.6 P6KE180A P6KE180CA154.01171.0189.01246.0 2.5 P6KE200A P6KE200CA171.01190.0210.01274.0 2.2 P6KE220A P6KE220CA185.01209.0231.01328.0 1.9 P6KE250A P6KE250CA214.01237.0263.01344.0 1.8 P6KE300A P6KE300CA256.01285.0315.01414.0 1.5 P6KE350A P6KE350CA300.01332.0368.01482.0 1.3 P6KE400A P6KE400CA342.01380.0420.01548.0 1.1①Surge waveform:10/1000μsV R：Stand-off Voltage--Maximum voltage that can be appliedV BR：Breakdown VoltageV C：Clamping Voltage--Peak voltage measured across the suppressor at a specified Ipp I R：Reverse Leakage CurrentRATINGS AND V‐I CHARACTERISTICS CURVES(T A=25ºC,unless otherwise noted) FIG.1:V-I curve characteristics(Uni-directional)FIG.2:V-I curve characteristicsV C V BR V R VV FI PPI PPV C V BR V R I T I R VI R V R V BR V CI TI PPtr=100k value50td00FIG.3:Pulse waveformPPM RSM 150FIG.4:Pulse derating curvePP 1004001.02.03.04.020255075100125150175SOLDERING PARAMETERSReflow Condition Pb-Free assembly (see FIG.5)PreHeat-Temperature Min (T s(min))+150℃-Temperature Max(T s(max))+200℃-Time (Min to Max)(t s )60-180secs.Average ramp up rate (Liquid us Temp (T L )to peak)3℃/sec.Max T s(max)to T L -Ramp-up Rate 3℃/sec.Max Reflow-Temperature(T L )(Liquid us)+217℃-Temperature(t L )60-150secs.Peak Temp (T p )+260(+0/-5)℃Time within 5℃of actual Peak Temp (t p )30secs.Max Ramp-down Rate6℃/sec.Max Time 25℃to Peak Temp (T P )8min.Max Do not exceed+260℃MARKING ＆ORDERING INFORMATIONCathode BandP6KE XX C A (1)(2)(3)(4)(1)Series:600watts series (2)Reverse Stand-off Voltage (3)Bi-directional(4)5%V BR Voltage toleranceProduct TypeLogoP 6KExxCATimetime to peak temperatue (t 25℃to peak)25t sT S(min)PreheatRamp-downT S(max)t LT L Critical Zone T L to T PRamp-upT PtpFIG.5:Reflow conditionT e m p e r a t u r etr =rise time to peak value td =decay t ime to half value10μsPeaHalf valuet(ms)T A (℃)Website:For additional information,pleasecontact your local SalesRepresentative.©Copyright2016,jksemiis a registered trademark of jksemi All rights arereserved PACKAGE MECHANICAL DATARef.DimensionsInches MillimetersMin.Max.Min.Max.A 1.000-25.40-B0.2280.300 5.807.62C0.0270.0350.690.89D0.1180.140 3.00 3.60Part Number Case Type Quantity Packing OptionP6KEXXCA/A DO-15/DO-204AC2000BoxA B ADC。