HD74AC02P中文资料

HD74LS02Quadruple 2-Input Positive NOR GatesREJ03D0389–0200Rev.2.00Feb.18.2005 Features• Ordering InformationPart Name Package Type Package Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74LS02P DILP-14pin PRDP0014AB-B(DP-14AV)P —HD74LS02FPEL SOP-14 pin (JEITA) PRSP0014DF-B(FP-14DAV)FP EL (2,000 pcs/reel)HD74LS02RPEL SOP-14 pin (JEDEC) PRSP0014DE-A(FP-14DNV)RP EL (2,500 pcs/reel)Note: Please consult the sales office for the above package availability. Pin ArrangementCircuit Schematic (1/4)Absolute Maximum RatingsUnitRatingsItem SymbolSupply voltage V CC Note 7 VInput voltage V IN 7 V Power dissipation P T 400 mW Storage temperature Tstg –65 to +150 °CNote: Voltage value, unless otherwise noted, are with respect to network ground terminal.Recommended Operating ConditionsUnitMaxItem SymbolMinTypSupply voltage V CC 4.75 5.00 5.25 VI OH — — –400 µAOutput currentI OL — — 8 mA°C7525–20Operating temperature ToprElectrical Characteristics(Ta = –20 to +75 °C)ItemSymbol min. typ.* max. Unit Condition V IH 2.0 — — V Input voltageV IL — — 0.8 V V OH 2.7 — — V V CC = 4.75 V, V IL = 0.8 V, I OH = –400 µA— — 0.5 I OL = 8 mAOutput voltageV OL— — 0.4 V I OL = 4 mAV CC = 4.75 V, V IH = 2 V I IH — — 20 µA V CC = 5.25 V, V I = 2.7 V I IL — — –0.4 mA V CC = 5.25 V, V I = 0.4 VInput current I I — — 0.1 mA V CC = 5.25 V, V I = 7 V Short-circuit outputcurrent I OS –20— –100 mA V CC = 5.25 V I CCH — 1.6 3.2 mA V CC = 5.25 VSupply currentI CCL — 2.8 5.4 mA V CC = 5.25 VInput clamp voltage V IK — — –1.5 V V CC = 4.75 V, I IN = –18 mA Note: * V CC = 5 V, Ta = 25°CSwitching Characteristics(V CC = 5 V, Ta = 25°C)Item Symbol min. typ. max. Unit Conditiont PLH — 10 15 nsPropagation delay time t PHL — 10 15 ns C L = 15 pF, R L = 2 k ΩNote: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D0005-0100)".Package Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001。

HD74HC09Quad. 2-input AND Gates (with open drain outputs)ADE-205-409 (Z)1st. EditionSep. 2000 Features• High Speed Operation: t pd = 8 ns typ (C L = 50 pF)• High Output Current: Fanout of 10 LSTTL Loads• Wide Operating Voltage: V CC = 2 to 6 V• Low Input Current: 1 µA max• Low Quiescent Supply Current: I CC (static) = 1 µA max (Ta = 25°C)Pin ArrangementHD74HC092DC CharacteristicsTa = 25°CTa = –40 to +85°CItem Symbol V CC (V)Min Typ Max MinMax Unit Test ConditionsInput voltageV IH2.0 1.5—— 1.5—V4.5 3.15—— 3.15—6.04.2—— 4.2—V IL2.0——0.5—0.5V 4.5—— 1.35—1.356.0——1.8— 1.8Output voltageV OL2.0—0.00.1—0.1VVin = V IH or V IL I OL = 20 µA4.5—0.00.1—0.16.0—0.00.1—0.14.5——0.26—0.33I OL = 4 mA 6.0——0.26—0.33I OL = 5.2 mAOff-state output current Io (off) 6.0——±0.5—±5.0µA Vin = V IH or V ILVout = V CC or GND Input current Iin 6.0——±0.1—±1.0µA Vin = V CC or GNDQuiescent supply currentI CC6.0——1.0—10µAVin = V CC or GND, Iout = 0 µAAC Characteristics (C L = 50 pF, Input t r = t f = 6 ns)Ta = 25°CTa = –40 to +85°CItem SymbolV CC (V)Min Typ Max MinMax Unit Test ConditionsPropagation delay t PLH2.0——90—115nstime4.5—1018—236.0——15—20t PHL 2.0——90—115ns 4.5—618—236.0——15—20Output fall timet THL2.0——75—95ns 4.5—515—196.0——13—16Input capacitanceCin——510—10pFHD74HC09 Package Dimensions3HD74HC094HD74HC095Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Hitachi Asia Ltd. Hitachi Tower16 Collyer Quay #20-00, Singapore 049318Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : .sg URLNorthAmerica : /Europe : /hel/ecg Asia : Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.(Taipei Branch Office)4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TPURL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre,Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong KongTel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281URL : Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 585160Hitachi Europe GmbHElectronic Components Group Dornacher Stra βe 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:Colophon 2.0。

HD74HC240Octal Buffers/Line Drivers/Line Receivers(with inverted 3-state outputs)REJ03D0594–0200(Previous ADE-205-471)Rev.2.00Jan 31, 2006 DescriptionThe HD74HC240 is an inverting buffer and has two active low enables (1G and 2G). Each enable independently controls 4 buffers. This device does not have schmitt trigger inputs.Features• High Speed Operation: t pd = 10 ns typ (C L = 50 pF)• High Output Current: Fanout of 15 LSTTL Loads• Wide Operating Voltage: V CC = 2 to 6 V• Low Input Current: 1 µA max• Low Quiescent Supply Current: I CC (static) = 4 µA max (Ta = 25°C)• Ordering InformationPart Name Package TypePackage Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74HC240P DILP-20pin PRDP0020AC-B(DP-20NEV)P —HD74HC240FPEL SOP-20 pin (JEITA) PRSP0020DD-B(FP-20DAV)FP EL (2,000 pcs/reel)HD74HC240RPEL SOP-20 pin (JEDEC) PRSP0020DC-A(FP-20DBV)RP EL (1,000 pcs/reel)HD74HC240TELL TSSOP-20pin PTSP0020JB-A(TTP-20DAV)T ELL (2,000 pcs/reel)Note: Please consult the sales office for the above package availability.Function TableInputs OutputG A YH X ZL H LL L HH : high levelL : low levelX : irrelevantZ : off (high-impedance) state of a 3-state outputPin ArrangementLogic DiagramAbsolute Maximum RatingsItem Symbol Ratings UnitSupply voltage range V CC –0.5 to 7.0 V Input / Output voltage V IN , V OUT –0.5 to V CC +0.5 V Input / Output diode current I IK , I OK ±20 mA Output current I O ±35 mA V CC , GND current I CC or I GND ±75 mA Power dissipation P T 500 mW Storage temperature Tstg –65 to +150 °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two ofwhich may be realized at the same time.Recommended Operating ConditionsItem Symbol Ratings Unit ConditionsSupply voltage V CC 2 to 6 V Input / Output voltage V IN , V OUT 0 to V CC V Operating temperature Ta –40 to 85 °C 0 to 1000 V CC = 2.0 V0 to 500 V CC = 4.5 V Input rise / fall time *1 t r , t f 0 to 400 ns V CC = 6.0 V Notes: 1. This item guarantees maximum limit when one input switches.Waveform: Refer to test circuit of switching characteristics.Electrical CharacteristicsTa = 25°C Ta = –40 to+85°CItem Symbol V CC (V)Min Typ Max Min MaxUnitTest Conditions2.0 1.5 — — 1.5— 4.5 3.15 — — 3.15 — V IH6.0 4.2 — — 4.2 —V 2.0 — — 0.5 — 0.5 4.5 — — 1.35 — 1.35Input voltageV IL6.0 — — 1.8 — 1.8V 2.0 1.9 2.0 — 1.9 — 4.5 4.4 4.5 — 4.4 — 6.0 5.9 6.0 — 5.9 — I OH = –20 µA 4.5 4.18 — — 4.13 — I OH = –6 mA V OH6.0 5.68 — — 5.63— V Vin = V IH or V IL I OH = –7.8 mA2.0 — 0.0 0.1 —0.1 4.5 — 0.0 0.1 — 0.1 6.0 — 0.0 0.1 — 0.1 I OL = 20 µA 4.5 — — 0.26 — 0.33 I OL = 6 mA Output voltage V OL6.0 — — 0.26 —0.33 V Vin = V IH or V IL I OL = 7.8 mA Off-state output currentI OZ 6.0— — ±0.5 — ±5.0 µA Vin = V IH or V IL ,Vout = V CC or GNDInput current Iin 6.0 — — ±0.1 — ±1.0 µA Vin = V CC or GNDQuiescent supply current I CC 6.0— — 4.0 — 40 µA Vin = V CC or GND, Iout = 0 µASwitching Characteristics(C L = 50 pF, Input t r = t f = 6 ns)Ta = 25°C Ta = –40 to +85°CItem Symbol V CC (V)Min Typ Max Min MaxUnitTest Conditions2.0 — — 90 — 115 4.5 — 10 18 — 23 t PHL6.0 — — 15 — 20 ns 2.0 — — 90 — 115 4.5 — 10 18 — 23 Propagation delaytimet PLH6.0 — — 15 — 20 ns 2.0 — — 150 — 190 4.5 — 11 30 — 38 t ZL6.0 — — 26 — 33 ns 2.0 — — 150 — 190 4.5 — 12 30 — 38 Output enable time t ZH6.0 — — 26 — 33 ns 2.0 — — 150 — 190 4.5 — 16 30 — 38 t LZ6.0 — — 26 — 33 ns 2.0 — — 150 — 190 4.5 — 19 30 — 38 Output disabletimet HZ6.0 — — 26 —33 ns 2.0 — — 60 —75 4.5 — 4 12 — 15 Output rise/fall timet TLH t THL 6.0 — — 10 — 13 ns Input capacitance Cin— — 5 10—10 pFTest CircuitWaveformsPackage Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology (Shanghai) Co., Ltd.Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, ChinaTel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> (2) 796-3115, Fax: <82> (2) 796-2145Renesas Technology Malaysia Sdn. BhdUnit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.。

HD74LS03Quadruple 2-Input Positive NAND Gates(with Open Collector Outputs)REJ03D0390–0200Rev.2.00Feb.18.2005 Features• Ordering InformationPart Name Package Type Package Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74LS03P DILP-14pin PRDP0014AB-B(DP-14AV)P —HD74LS03FPEL SOP-14 pin (JEITA) PRSP0014DF-B(FP-14DAV)FP EL (2,000 pcs/reel)Note: Please consult the sales office for the above package availability. Pin ArrangementCircuit Schematic (1/4)Absolute Maximum RatingsItem Symbol Ratings UnitSupply voltage V CC Note 7 V Input voltage V IN 7 V Power dissipation P T 400 mW Storage temperature Tstg –65 to +150 °C Note: Voltage value, unless otherwise noted, are with respect to network ground terminal.Recommended Operating ConditionsItem Symbol Min Typ Max UnitSupply voltage V CC 4.75 5.00 5.25 V Output voltage V OH — — 5.5 V Output current I OL — — 8 mA Operating temperature Topr –20 25 75 °CElectrical Characteristics(Ta = –20 to +75 °C)ItemSymbol min. typ.* max. UnitConditionV IH 2.0 — — V Input voltage V IL — — 0.8 V — — 0.5I OL = 8 mA Output voltageV OL— — 0.4VI OL = 4 mAV CC = 4.75 V, V IH = 2 VI IH — — 20 µA V CC = 5.25 V, V I = 2.7 VI IL — — –0.4 mA V CC = 5.25 V, V I = 0.4 VInput current I I —— 0.1 mA V CC = 5.25 V, V I = 7 V Output current I OH — — 100 µA V CC = 4.75 V, V IH = 0.8 V, V OH = 5.5 VI CCH — 0.8 1.6 mA V CC = 5.25 VSupply currentI CCL — 2.4 4.4 mA V CC = 5.25 VInput clamp voltage V IK — — –1.5 V V CC = 4.75 V, I IN = –18 mA Note: * V CC = 5 V, Ta = 25°CSwitching Characteristics(V CC = 5 V, Ta = 25°C)Item Symbol min. typ. max. Unit Conditiont PLH — 17 32 nsPropagation delay timet PHL — 25 28 ns C L = 15 pF, R L = 2 k Ω Note: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D0005-0100)".Package Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001。

元器件交易网Hitachi CodeJEDECEIAJWeight (reference value)DP-14ConformsConforms0.97 gUnit: mm元器件交易网Hitachi CodeJEDECEIAJWeight (reference value)FP-14DA —Conforms 0.23 g*Dimension including the plating thickness Base material dimension° – 8°Hitachi CodeJEDEC EIAJWeight (reference value)FP-14DN Conforms Conforms 0.13 g° – 8°*Pd platingCautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。

HD74LS00Quadruple 2-Input NAND GatesREJ03D0387–0200Rev.2.00Feb.18.2005 Features• Ordering InformationPart Name Package Type Package Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74LS00P DILP-14pin PRDP0014AB-B(DP-14AV)P —HD74LS00FPEL SOP-14 pin (JEITA) PRSP0014DF-B(FP-14DAV)FP EL (2,000 pcs/reel)HD74LS00RPEL SOP-14 pin (JEDEC) PRSP0014DE-A(FP-14DNV)RP EL (2,500 pcs/reel)Note: Please consult the sales office for the above package availability. Pin ArrangementCircuit Schematic (1/4)Absolute Maximum RatingsUnitRatingsItem SymbolSupply voltage V CC Note 7 VInput voltage V IN 7 V Power dissipation P T 400 mW Storage temperature Tstg –65 to +150 °CNote: Voltage value, unless otherwise noted, are with respect to network ground terminal.Recommended Operating ConditionsUnitMaxItem SymbolMinTypSupply voltage V CC 4.75 5.00 5.25 VI OH — — –400 µAOutput currentI OL — — 8 mA°C7525–20Operating temperature ToprElectrical Characteristics(Ta = –20 to +75 °C)ItemSymbol min. typ.* max. Unit Condition V IH 2.0 — — V Input voltageV IL — — 0.8 V V OH 2.7 — — V V CC = 4.75 V, V IL = 0.8 V, I OH = –400 µA— — 0.5 I OL = 8 mAOutput voltageV OL— — 0.4 V I OL = 4 mAV CC = 4.75 V, V IH = 2 V I IH — — 20 µA V CC = 5.25 V, V I = 2.7 V I IL — — –0.4 mA V CC = 5.25 V, V I = 0.4 VInput current I I — — 0.1 mA V CC = 5.25 V, V I = 7 V Short-circuit outputcurrent I OS –20— –100 mA V CC = 5.25 V I CCH — 0.8 1.6 mA V CC = 5.25 VSupply currentI CCL — 2.4 4.4 mA V CC = 5.25 VInput clamp voltage V IK — — –1.5 V V CC = 4.75 V, I IN = –18 mA Note: * V CC = 5 V, Ta = 25°CSwitching Characteristics(V CC = 5 V, Ta = 25°C)Item Symbol min. typ. max. Unit Conditiont PLH — 9 15 nsPropagation delay time t PHL — 10 15 ns C L = 15 pF, R L = 2 k ΩNote: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D0005-0100)".Package Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001。

HD74AC283/HD74ACT2834-bit Binary Full Adder with Fast CarryADE-205-388 (Z)1st. EditionSep. 2000 DescriptionThe HD74AC283/HD74ACT283 high-speed 4-bit binary full adder with internal carry lookahead acceptstwo 4-bit binary works (A0 – A3, B– B3) and a Carry input (C). It generates the binary Sum outputs (S–S 3) and the Carry output (C4) from the most significant bit. The HD74AC283/HD74ACT283 will operatewith either active High or active Low operands (positive or negative logic). Features• Outputs Source/Sink 24 mA• HD74ACT283 has TTL-Cmpatible InputsPin ArrangementHD74AC283/HD74ACT2832Logic SymbolPin NamesA 0 – A 3 A Operand InputsB 0 – B 3 B Operand InputsC 0Carry Input S 0 – S 3Sum Outputs C 4Carry OutputFunctional DescriptionThe HD74AC283/HD74ACT283 adds two 4-bit binary words (A plus B) plus the incoming Carry (C 0).The binary sum appears on the Sum (S 0 – S 3) and outgoing carry (C 4) outputs. The binary weight of the various inputs and outputs is indicated by the subscript numbers, representing powers of two.20 (A 0 + B 0 + C 0) + 21 (A 1 + B 1) + 22 (A 2 + B 2) + 23 (A 3 + B 3) = S 0 + 2S 1 + 4S 2 + 8S 3 + 16C 4Where (+) = plusInterchanging inputs of equal weight does not affect the operation. Thus C 0, A 0, B 0 can be arbitrarily assigned to pins 5, 6 and 7 for DIPS. Due to the symmetry of the binary add function, the HD74AC283/HD74ACT283 can be used either with all inputs and outputs active High (positive logic) or with all inputs and outputs active Low (negative logic). See Figure a. Note that if C 0 is not used it must be tied Low for active High logic or tied High for active Low logic.Due to pin limitations, the intermediate carries of the HD74AC283/HD74ACT283 are not brought out for use as inputs or outputs. However, other means can be used to effectively insert a carry into, or bring a carry out from, an intermediate stage. Figure b shows how to make a 3-bit adder. Tying the operand inputs of the fourth adder (A 3, B 3) Low makes S 3 dependent only on, and equal to, the carry from the third ing somewhat the same principle Figure c shows a way of dividing the HD74AC283/HD74ACT283 into a 2-bit and a 1-bit adder. The third stage adder (A 2, B 2, S 2) is used merely as a means of getting a carry (C 10) signal into the fourth stage (via A 2 and B 2) and bringing out the carry from the second stage on S 2.Note that as long as A 2 and B 2 are the same, whether High or Low, they do not influence S 2. Similarly,when A 2 and B 2 are the same the carry into the third stage does not influence the carry out of the thirdHD74AC283/HD74ACT2833stage. Figure d shows a method of implementing a 5-input encoder, where the inputs are equally weighted.The outputs S 0, S 1 and S 2 present a binary number equal to the number of inputs I 1 – I 5 that are true. Figure e shows one method of implementing a 5-input majority gate. When three or more of the inputs I 1 – I 5 are true, the output M 5 is true.Fig. a Active HIGH varsus Active LOW InterpretationC 0A 0A 1A 2A 3B 0B 1B 2B 3S 0S 1S 2S 3C 4Logic levels L L H L H H L L H H H L L H Active HIGH 00101100111001Active LOW1111111Active HIGH: 0 + 10 + 9 = 3 + 16Active LOW: 1 + 5 + 6 = 12 + 0Fig. b 3-bit AdderFig. c 2-bit and 1-bit addersHD74AC283/HD74ACT283Fig. d 5-Input EncoderFig. e 5-Input Majority Gate 4HD74AC283/HD74ACT2835Logic DiagramDC Characteristics (unless otherwise specified)ItemSymbol Max Unit ConditionMaximum quiescent supply current I CC 80µA V IN = V CC or ground, V CC = 5.5 V,Ta = Worst caseMaximum quiescent supply current I CC 8.0µA V IN = V CC or ground, V CC = 5.5 V,Ta = 25°CMaximum I CC /input (HD74ACT283)I CCT1.5mAV IN = V CC – 2.1 V, V CC = 5.5 V,Ta = Worst caseHD74AC283/HD74ACT2836AC Characteristics: HD74AC283Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pF ItemSymbol V CC (V)*1Min Typ Max Min Max Unit Propagation delay t PLH3.3 1.011.515.0 1.016.5nsC 0 to S n5.0 1.09.511.5 1.012.5Propagation delay t PHL 3.3 1.010.514.0 1.015.5ns C 0 to S n5.0 1.08.510.5 1.011.5Propagation delay t PLH 3.3 1.014.017.0 1.018.5ns A n or B n to S n 5.0 1.011.513.5 1.014.5Propagation delay t PHL 3.3 1.013.516.5 1.018.0ns A n or B n to S n 5.0 1.011.013.0 1.014.0Propagation delay t PLH 3.3 1.09.512.5 1.015.5ns C 0 to C 45.0 1.07.59.5 1.010.5Propagation delay t PHL 3.3 1.010.013.0 1.014.0ns C 0 to C 45.0 1.08.010.0 1.011.0Propagation delay t PLH 3.3 1.011.514.5 1.016.0ns A n or B n to C 4 5.0 1.09.511.5 1.012.5Propagation delay t PHL 3.3 1.012.015.0 1.016.5ns A n or B n to C 4 5.01.010.012.01.013.0Note:1.Voltage Range 3.3 is 3.3 V ± 0.3 VVoltage Range 5.0 is 5.0 V ± 0.5 VHD74AC283/HD74ACT2837AC Characteristics: HD74ACT283Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pF ItemSymbol V CC (V)*1Min Typ Max Min Max Unit Propagation delay C 0 to S nt PLH 5.0 1.011.513.5 1.014.5ns Propagation delay C 0 to S nt PHL 5.0 1.010.012.0 1.013.0ns Propagation delay A n or B n to S n t PLH 5.0 1.013.015.0 1.016.5ns Propagation delay A n or B n to S n t PHL 5.0 1.012.014.0 1.015.5ns Propagation delay C 0 to C 4t PLH 5.0 1.09.011.0 1.012.0ns Propagation delay C 0 to C 4t PHL 5.0 1.010.012.0 1.013.0ns Propagation delay A n or B n to C 4t PLH 5.0 1.011.013.0 1.014.0ns Propagation delay A n or B n to C 4t PHL5.01.011.513.51.014.5nsNote:1.Voltage Range 5.0 is 5.0 V ± 0.5 VCapacitanceItemSymbol Typ Unit Condition Input capacitanceC IN 4.5pF V CC = 5.5 V Power dissipation capacitanceC PD60.0pFV CC = 5.0 VHD74AC283/HD74ACT283 Package Dimensions8HD74AC283/HD74ACT2839HD74AC283/HD74ACT28310Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Hitachi Asia Ltd. Hitachi Tower16 Collyer Quay #20-00, Singapore 049318Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : .sg URLNorthAmerica : /Europe : /hel/ecg Asia : Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.(Taipei Branch Office)4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TPURL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre,Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong KongTel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281URL : Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 585160Hitachi Europe GmbHElectronic Components Group Dornacher Stra βe 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:Colophon 2.0。

HD74HC292/HD74HC294Programmable Frequency Divider/Digital TimerDescriptionThis device divides the incoming clock frequency by a number (a power of 2) that is preset by the Programming inputs. It has two Clock inputs, either of which may be used as a clock inhibit. The device also has an active-low Reset, which initializes the internal flip-flop states. Test Point outputs (TP1, TP2, TP3) are provided with HD74HC292 to facilitate incoming inspections.Test Point output is provided with HD74HC294 to facilitate incoming inspections.Features• High Speed Operation: t pd (Clock to Q) = 16 ns typ (C L = 50 pF)• High Output Current: Fanout of 10 LSTTL Loads• Wide Operating Voltage: V CC = 2 to 6 V• Low Input Current: 1 µA max• Low Quiescent Supply Current: I CC (static) = 4 µA max (Ta = 25°C)Function TableCLR CLK1CLK2Q Output ModeL X X Cleared to LH H X InhibitH X H InhibitHD74HC292/HD74HC294HD74HC292ProgrammingInputs Frequency DivisionQ Out TP1TP2TP3E D C B A Binary Decimal Binary Decimal Binary Decimal Binary DecimalL L L L L Inhibit Inhibit Inhibit Inhibit Inhibit Inhibit Inhibit Inhibit L L L L H Inhibit Inhibit Inhibit Inhibit Inhibit Inhibit Inhibit Inhibit L L L H L22429512217131,07222416,777,216 L L L H H23829512217131,07222416,777,216 L L H L L241629512217131,07222416,777,216 L L H L H253229512217131,07222416,777,216 L L H H L266429512217131,07222416,777,216 L L H H H2712829512217131,07222416,777,216 L H L L L2825629512217131,072224 L H L L H2951229512217131,072224 L H L H L2101,02429512217131,0722416 L H L H H2112,04829512217131,0722416 L H H L L2124,09629512217131,0722664 L H H L H2138,19229512217131,0722664 L H H H L21416,38429512Disabled LOW28256 L H H H H21532,76829512Disabled LOW28256 H L L L L21665,536295122382101,024 H L L L H217131,072295122382101,024 H L L H L218262,1442951225322124,096 H L L H H219524,2882951225322124,096 H L H L L2201,048,576295122712821416,384 H L H L H2212,097,152295122712821416,384 H L H H L2224,194,304Disabled LOW2951221665,536 H L H H H2238,388,608Disabled LOW2951221665,536 H H L L L22416,777,2162382112,048218262,144 H H L L H22533,554,4322382112,048218262,144 H H L H L22667,108,86425322138,1922201,048,576 H H L H H227134,217,72825322138,1922201,048,576 H H H L L228268,435,4562712821532,7682224,194,304 H H H L H229536,870,9122712821532,7682224,194,304 H H H H L2301,073,741,82429512217131,07222416,777,216 H H H H H2312,147,483,64829512217131,07222416,777,2162HD74HC292/HD74HC294HD74HC294Programming Inputs Frequency DivisionQ Output TP OutputD C B A Binary Decimal Binary DecimalL L L L Inhibit Inhibit Inhibit Inhibit L L L H Inhibit Inhibit Inhibit Inhibit L L H L22429512 L L H H23829512 L H L L241629512 L H L H253229512 L H H L266429512 L H H H27128Disabled LOW H L L L28256224 H L L H29512238 H L H L2101,0242416 H L H H2112,0482532 H H L L2124,0962664 H H L H2138,19227128 H H H L21416,38428256 H H H H21532,768295123HD74HC292/HD74HC294 Pin ArrangementHD74HC292HD74HC2944HD74HC292/HD74HC294 Logic DiagramHD74HC2925HD74HC292/HD74HC294 HD74HC2946HD74HC292/HD74HC2947DC CharacteristicsTa = 25°CTa = –40 to +85°CItem Symbol V CC (V)Min Typ Max MinMax Unit Test ConditionsInput voltageV IH2.0 1.5—— 1.5—V4.5 3.15—— 3.15—6.04.2—— 4.2—V IL2.0——0.5—0.5V 4.5—— 1.35—1.356.0——1.8— 1.8Output voltageV OH2.0 1.9 2.0— 1.9—VVin = V IH or V IL I OH = –20 µA4.5 4.4 4.5— 4.4—6.05.96.0— 5.9—4.5 4.18—— 4.13—I OH = –4 mA 6.05.68——5.63—I OH = –5.2 mAV OL2.0—0.00.1—0.1VVin = V IH or V IL I OL = 20 µA4.5—0.00.1—0.16.0—0.00.1—0.14.5——0.26—0.33I OL = 4 mA 6.0——0.26—0.33I OL = 5.2 mAInput current Iin 6.0——±0.1—±1.0µA Vin = V CC or GNDQuiescent supply currentI CC6.0——4.0—40µAVin = V CC or GND, Iout = 0 µAHD74HC292/HD74HC2948AC Characteristics (C L = 50 pF, Input t r = t f = 6 ns)Ta = 25°CTa = –40 to +85°CItemSymbol V CC (V)Min Typ Max MinMax Unit Test ConditionsMaximum clock f max2.0——5—4MHzfrequency4.5——27—216.0——31—24Propagation delay t PLH 2.0——600—750nsClock to outputtime4.5—16120—1506.0——100—125Removal timet rem2.0100——125—ns 4.520–4—25—6.017——21—Pulse widtht w2.080——100—ns 4.51614—20—6.014–—17—Output rise/fall t TLH 2.0——75—95ns timet THL 4.5—515—196.0——13—16Input capacitanceCin——510—10pFHitachi CodeJEDECEIAJWeight (reference value)DP-16 Conforms Conforms 1.07 gHitachi Code JEDEC EIAJWeight (reference value)FP-16DA —Conforms 0.24 g*Dimension including the plating thicknessBase material dimension° – 8°Hitachi CodeJEDECEIAJWeight (reference value)FP-16DNConformsConforms0.15 gUnit: mm*Dimension including the plating thickness Base material dimension° – 8°元器件交易网Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。

HD74ALVCH16227012-bit to 24-bit Registered Bus Exchanger with 3-state OutputsADE-205-178A (Z)2nd. EditionMarch 1998 DescriptionThe HD74ALVCH162270 is used in applications where data must be transferred from a narrow high speed bus to a wide lower frequency bus. The device provides synchronous data exchange between the two ports. Data is stored in the internal registers on the low to high transition of the clock (CLK) input when the appropriate CLKEN inputs are low. The select (SEL) line selects 1B or 2B data for the A outputs. For data transfer in the A to B direction, a two stage pipeline is provided in the A to 1B path, with a single storage register in the A to 2B path. Proper control of the CLKENA inputs allows two sequential 12-bit words to be presented synchronously as a 24-bit word on the B port. Data flow is controlled by the active low output enables (OEA, OEB). The control terminals are registered to synchronize the bus direction changes with CLK. Active bus hold circuitry is provided to hold unused or floating data inputs at a valid logic level. All outputs, which are designed to sink up to 12 mA, include 26 Ω resistors to reduce overshoot and undershoot.Features• V CC = 2.3 V to 3.6 V• Typical V OL ground bounce < 0.8 V (@V CC = 3.3 V, Ta = 25°C)• Typical V OH undershoot > 2.0 V (@V CC = 3.3 V, Ta = 25°C)• High output current ±12 mA (@V CC = 3.0 V)• Bus hold on data inputs eliminates the need for external pullup / pulldown resistors• All outputs have equivalent 26 Ω series resistors, so no external resistors are required.HD74ALVCH1622702Function TableInputs Outputs CLK OEA OEB A 1B, 2B ↑H H Z Z ↑H L Z Active ↑L H Active Z ↑LLActiveActiveOutput enableInputs Outputs CLKENA1CLKENA2CLK A 1B 2B X H ↑L 1B 0 *1, 22B 0 *1X H ↑H 1B 0 *1, 22B 0 *1L L ↑L L *2L L L ↑H H *2H H L ↑L 1B 0 *1L H L ↑H 1B 0 *1H HHXX1B 0 *12B 0 *1A-to-B storage (OEB = L)Note:This functional table describes the case of transferring the same data for A to 1B path. For the caseof transferring different data, see logic diagrams.HD74ALVCH1622703Inputs Output ACLKEN1B CLKEN2B CLK SEL 1B 2B H X X H X X A 0 *1X H X L X X A 0 *1L X ↑H L X L L X ↑H H X H X L ↑L X L L XL↑LXHH B-to-A storage (OEA = L)H : High level L : Low level X : ImmaterialZ : High impedance↑ : Low to high transitionNotes: 1.Output level before the indicated steady state input conditions were established.2.Two CLK edges are needed to propagate data.HD74ALVCH162270 Pin Arrangement4HD74ALVCH1622705Absolute Maximum RatingsItemSymbol Ratings Unit ConditionsSupply voltage V CC –0.5 to 4.6V Input voltage *1, 2V I –0.5 to 4.6VExcept I/O ports –0.5 to V CC +0.5I/O ports Output voltage *1, 2V O –0.5 to V CC +0.5V Input clamp current I IK –50mA V I < 0Output clamp current I OK ±50mA V O < 0 or V O > V CC Continuous output current I O±50mA V O = 0 to V CCV CC , GND current / pin I CC or I GND ±100mA Maximum power dissipation at Ta = 55°C (in still air) *3P T 1W TSSOP Storage temperature Tstg–65 to 150°CNotes:Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.1.The input and output negative voltage ratings may be exceeded if the input and output clampcurrent ratings are observed.2.This value is limited to 4.6 V maximum.3.The maximum package power dissipation is calculated using a junction temperature of 150°Cand a board trace length of 750 mils.Recommended Operating ConditionsItemSymbol Min Max Unit ConditionsSupply voltage V CC 2.3 3.6V Input voltage V I 0V CC V Output voltageV O 0V CC V High level output currentI OH—–6mAV CC = 2.3 V —–8V CC = 2.7 V —–12V CC = 3.0 V Low level output currentI OL—6mA V CC = 2.3 V —8V CC = 2.7 V —12V CC = 3.0 V Input transition rise or fall rate ∆t / ∆v 010ns / V Operating temperatureTa–4085°C Note:Unused control inputs must be held high or low to prevent them from floating.HD74ALVCH162270 Logic Diagram6HD74ALVCH1622707Electrical Characteristics (Ta = –40 to 85°C)Item Symbol V CC (V)MinMax Unit Test Conditions Input voltageV IH 2.3 to 2.7 1.7—V2.7 to3.6 2.0—V IL2.3 to 2.7—0.72.7 to3.6—0.8Output voltageV OH2.3 to3.6V CC –0.2—VI OH = –100 µA2.3 1.9—I OH = –4 mA, V IH = 1.7 V 2.3 1.7—I OH = –6 mA, V IH = 1.7 V3.0 2.4—I OH = –6 mA, V IH = 2.0 V 2.7 2.0—I OH = –8 mA, V IH = 2.0 V 3.02.0—I OH = –12 mA, V IH = 2.0 V V OL2.3 to3.6—0.2I OL = 100 µA2.3—0.4I OL = 4 mA, V IL = 0.7 V 2.3—0.55I OL = 6 mA, V IL = 0.7 V3.0—0.55I OL = 6 mA, V IL = 0.8 V 2.7—0.6I OL = 8 mA, V IL = 0.8 V 3.0—0.8I OL = 12 mA, V IL = 0.8 V Input currentI IN 3.6—±5µA V IN = V CC or GND I IN (hold)2.345—V IN = 0.7 V 2.3–45—V IN = 1.7 V3.075—V IN = 0.8 V 3.0–75—V IN = 2.0 V 3.6—±500V IN = 0 to 3.6 V *1Off state output currentI OZ 3.6—±10µA V OUT = V CC or GND Quiescent supply current I CC3.6—40µA V IN = V CC or GND∆I CC3.0 to 3.6—750µA V IN = one input at (V CC –0.6) V,other inputs at V CC or GND Note:1.This is the bus hold maximum dynamic current required to switch the input from one state toanother.HD74ALVCH1622708Switching Characteristics (Ta = –40 to 85°C)ItemSymbol V CC (V)Min Typ Max Unit FROM (Input)TO(Output)Maximum clock frequency f max2.5±0.2135——MHz2.7135——3.3±0.3135——Propagation delay timet PLH 2.5±0.2 2.5— 6.9nsCLKBt PHL2.7—— 6.43.3±0.3 1.7— 5.62.5±0.2 2.2— 6.4CLKA2.7—— 6.03.3±0.3 1.6— 5.22.5±0.2 2.4—7.2SELA2.7——7.03.3±0.31.6— 6.0Output enable timet ZH 2.5±0.2 2.1—7.9nsCLKA or Bt ZL2.7——7.43.3±0.3 1.6— 6.5Output disable timet HZ 2.5±0.2 3.0—7.8nsCLKA or Bt LZ2.7——7.13.3±0.3 1.7— 6.2Input capacitance C IN 3.3— 3.5—pF Control inputs Output capacitanceC IN / O3.3—9.0—pFA orB portsHD74ALVCH1622709Switching Characteristics (Ta = –40 to 85°C) (cont)Item Symbol V CC (V)Min Typ Max Unit FROM (Input)Setup timet su2.5±0.2 4.1——nsA data before CLK ↑2.73.8——3.3±0.3 3.1——2.5±0.20.9—— B data before CLK ↑2.7 1.2——3.3±0.30.9——2.5±0.2 3.5——CLKENA1 or2.73.2——CLKENA2 before CLK ↑3.3±0.3 2.7——2.5±0.2 3.4——CLKEN1B or2.73.0——CLKEN2B before CLK ↑3.3±0.3 2.6——2.5±0.24.4——OE before CLK ↑2.7 3.9——3.3±0.33.2——Hold timet h2.5±0.20——nsA data after CLK ↑2.70——3.3±0.30.2——2.5±0.2 1.4——B data after CLK ↑2.7 1.0——3.3±0.3 1.7——2.5±0.20——CLKENA1 or 2.70.1——CLKENA2 after CLK ↑3.3±0.30.3——2.5±0.20——CLKEN1B or 2.70——CLKEN2B after CLK ↑3.3±0.30.6——2.5±0.20——OE after CLK ↑2.70——3.3±0.30.1——Pulse widtht w2.5±0.23.3——nsCLK “H” or “L”2.7 3.3——3.3±0.33.3——HD74ALVCH16227010HD74ALVCH16227011HD74ALVCH16227012HD74ALVCH162270 Package DimensionsUnit : mm13Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。

HD74HC08Quad. 2-input AND GatesADE-205-408 (Z)1st. EditionSep. 2000 Features• High Speed Operation: t pd = 9 ns typ (C L = 50 pF)• High Output Current: Fanout of 10 LSTTL Loads• Wide Operating Voltage: V CC = 2 to 6 V• Low Input Current: 1 µA max• Low Quiescent Supply Current: I CC (static) = 1 µA max (Ta = 25°C)Pin ArrangementHD74HC082DC CharacteristicsTa = 25°CTa = –40 to +85°CItem Symbol V CC (V)Min Typ Max MinMax Unit Test ConditionsInput voltageV IH2.0 1.5—— 1.5—V4.5 3.15—— 3.15—6.04.2—— 4.2—V IL2.0——0.5—0.5V 4.5—— 1.35—1.356.0——1.8— 1.8Output voltageV OH2.0 1.9 2.0— 1.9—VVin = V IH or V IL I OH = –20 µA4.5 4.4 4.5— 4.4—6.05.96.0— 5.9—4.5 4.18—— 4.13—I OH = –4 mA 6.05.68——5.63—I OH = –5.2 mAV OL2.0—0.00.1—0.1VVin = V IH or V IL I OL = 20 µA4.5—0.00.1—0.16.0—0.00.1—0.14.5——0.26—0.33I OL = 4 mA 6.0——0.26—0.33I OL = 5.2 mAInput current Iin 6.0——±0.1—±1.0µA Vin = V CC or GNDQuiescent supply currentI CC6.0——1.0—10µAVin = V CC or GND, Iout = 0 µAHD74HC083AC Characteristics (C L = 50 pF, Input t r = t f = 6 ns)Ta = 25°CTa = –40 to +85°CItem SymbolV CC (V)Min Typ Max MinMax Unit Test ConditionsPropagation delay t PHL2.0——90—115nstime4.5—1018—236.0——15—20t PLH 2.0——90—115ns 4.5—818—236.0——15—20Output rise timet TLH2.0——75—95ns 4.5—515—196.0——13—16Output fall timet THL2.0——75—95ns 4.5—515—196.0——13—16Input capacitanceCin——510—10pFHD74HC08 Package Dimensions4HD74HC085HD74HC086Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Hitachi Asia Ltd. Hitachi Tower16 Collyer Quay #20-00, Singapore 049318Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : .sg URLNorthAmerica : /Europe : /hel/ecg Asia : Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.(Taipei Branch Office)4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TPURL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre,Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong KongTel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281URL : Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 585160Hitachi Europe GmbHElectronic Components Group Dornacher Stra βe 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:Colophon 2.0。

HD74AC240/HD74ACT240Octal Buffer/Line Driver with 3-State OutputADE-205-381 (Z)1st. EditionSep. 2000 DescriptionThe HD74AC240/HD74ACT240 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density.Features• 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers• Outputs Source/Sink 24 mA• HD74ACT240 has TTL-Compatible InputsPin ArrangementHD74AC240/HD74ACT2402Truth TablesInputs Outputs (Pins 12, 14, 16, 18)OE 1A Y L L H L H L H XZInputs Outputs (Pins 3, 5, 7, 9)OE 2A Y L L H L H L H X ZH :High Voltage Level L :Low Voltage Level X :ImmaterialZ:High ImpedanceDC Characteristics (unless otherwise specified)ItemSymbol Max Unit ConditionMaximum quiescent supply current I CC 80µA V IN = V CC or ground, V CC = 5.5 V,Ta = Worst caseMaximum quiescent supply current I CC 8.0µA V IN = V CC or ground, V CC = 5.5 V,Ta = 25°CMaximum additional I CC /input (HD74ACT240)I CCT1.5mAV IN = V CC – 2.1 V, V CC = 5.5 V,Ta = Worst caseHD74AC240/HD74ACT2403AC Characteristics: HD74AC240Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pF ItemSymbol V CC (V)*1Min Typ Max Min Max Unit Propagation delay t PLH3.3 1.0 6.08.0 1.09.0nsData to output 5.0 1.0 4.5 6.5 1.07.0Propagation delay t PHL 3.3 1.0 5.08.0 1.08.5ns Data to output 5.0 1.0 4.5 6.0 1.0 6.5Output enable time t ZH 3.3 1.0 6.010.5 1.011.0ns 5.0 1.0 5.07.0 1.08.0Output enable time t ZL 3.3 1.07.010.0 1.011.0ns 5.0 1.0 5.58.0 1.08.5Output disable time t HZ 3.3 1.07.010.0 1.010.5ns 5.0 1.0 6.59.0 1.09.5Output disable time t LZ 3.3 1.07.510.5 1.011.5ns 5.01.06.59.01.09.5Note:1.Voltage Range 3.3 is 3.3 V ± 0.3 VVoltage Range 5.0 is 5.0 V ± 0.5 VAC Characteristics: HD74ACT240Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pF ItemSymbol V CC (V)*1Min Typ Max Min Max Unit Propagation delay Data to output t PLH 5.0 1.0 6.08.5 1.09.5ns Propagation delay Data to output t PHL 5.0 1.0 5.57.5 1.08.5ns Output enable time t ZH 5.0 1.07.08.5 1.09.5ns Output enable time t ZL 5.0 1.07.09.5 1.010.5ns Output disable time t HZ 5.0 1.08.09.5 1.010.5ns Output disable time t LZ5.01.06.510.01.010.5nsNote:1.Voltage Range 5.0 is 5.0 V ± 0.5 VHD74AC240/HD74ACT2404CapacitanceItemSymbol Typ Unit Condition Input capacitanceC IN 4.5pF V CC = 5.5 V Power dissipation capacitanceC PD45.0pFV CC = 5.0 VHD74AC240/HD74ACT240 Package Dimensions5HD74AC240/HD74ACT2406HD74AC240/HD74ACT2407Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Hitachi Asia Ltd. Hitachi Tower16 Collyer Quay #20-00, Singapore 049318Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : .sg URLNorthAmerica : /Europe : /hel/ecg Asia : Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.(Taipei Branch Office)4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TPURL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre,Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong KongTel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281URL : Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 585160Hitachi Europe GmbHElectronic Components Group Dornacher Stra βe 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:Colophon 2.0。

元器件交易网Hitachi Code JEDEC EIAJWeight (reference value)DP-20N —Conforms 1.26 gUnit: mm元器件交易网Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。

HD74HC00Quad. 2-input NAND GatesREJ03D0531-0200(Previous ADE-205-403)Rev.2.00Oct 06, 2005 Features• High Speed Operation: t pd = 8.5 ns typ (C L = 50 pF)• High Output Current: Fanout of 10 LSTTL Loads• Wide Operating Voltage: V CC = 2 to 6 V• Low Input Current: 1 µA max• Low Quiescent Supply Current: I CC (static) = 1 µA max (Ta = 25°C)• Ordering InformationPart Name Package TypePackage Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74HC00P DILP-14pin PRDP0014AB-B(DP-14AV)P —HD74HC00FPEL SOP-14 pin (JEITA) PRSP0014DF-B(FP-14DAV)FP EL (2,000 pcs/reel)HD74HC00RPEL SOP-14 pin (JEDEC) PRSP0014DE-A(FP-14DNV)RP EL (2,500 pcs/reel)HD74HC00TELL TSSOP-14pin PTSP0014JA-B(TTP-14DV)T ELL(2,000pcs/reel)Note: Please consult the sales office for the above package availability.Function TableInputs OutputA B YL L HL H HH L HH H LH : High levelL : Low levelPin ArrangementAbsolute Maximum RatingsItem Symbol Ratings UnitSupply voltage range V CC –0.5 to 7.0 V Input / Output voltage Vin, Vout –0.5 to V CC +0.5VInput / Output diode current I IK , I OK ±20 mAOutput current I O±25 mAV CC , GND current I CC or I GND ±50 mAPower dissipationP T 500 mWStorage temperature Tstg –65 to +150 °CNote: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two ofwhich may be realized at the same time.Recommended Operating ConditionsItem Symbol Ratings Unit ConditionsSupply voltage V CC 2 to 6 V Input / Output voltage V IN , V OUT 0 to V CC V Operating temperature Ta –40 to 85 °C 0 to 1000 V CC = 2.0 V 0 to 500V CC = 4.5 V Input rise / fall time *1t r , t f0 to 400nsV CC = 6.0 VNote: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics.Electrical CharacteristicsTa = 25°CTa = –40 to+85°CItem Symbol V CC (V) Min Typ Max Min Max UnitTest Conditions2.0 1.5 — — 1.5 — 4.53.15 — — 3.15 —V IH 6.0 4.2 — — 4.2 —V2.0 — — 0.5 — 0.5 4.5 — — 1.35 — 1.35Input voltage V IL6.0 — — 1.8 — 1.8 V 2.0 1.9 2.0 — 1.9 — 4.5 4.4 4.5 — 4.4 — 6.0 5.9 6.0 — 5.9 — I OH = –20 µA 4.5 4.18 — — 4.13 — I OH = –4 mA V OH6.0 5.68 — — 5.63 —V Vin = V IH or V IL I OH = –5.2 mA2.0 — 0.0 0.1 — 0.1 4.5 — 0.0 0.1 — 0.1 6.0 — 0.0 0.1 — 0.1 I OL = 20 µA 4.5 — — 0.26 — 0.33I OL = 4 mAOutput voltage V OL6.0 — — 0.26 — 0.33 V Vin = V IH or V IL I OL = 5.2 mA Input current Iin6.0 — — ±0.1 — ±1.0 µA Vin = V CC or GNDQuiescent supplycurrent I CC 6.0 — — 1.0 — 10 µA Vin = V CC or GND, Iout = 0 µASwitching Characteristics (C L = 50 pF, Input t r = t f = 6 ns)Ta = 25°CTa = –40 to +85°CItem Symbol V CC (V) Min Typ Max MinMax UnitTest Conditions2.0 — — 90 — 115 4.5 — 9 18 —23 t PLH 6.0 — — 15 —20 ns 2.0 — — 90 —115 4.5 — 8 18 — 23 Propagation delay time t PHL 6.0 — — 15 —20ns 2.0 — — 75 —95 4.5 — 7 15 — 19 Output rise time t TLH 6.0 — — 13 —16ns 2.0 — — 75 —95 4.5 — 7 15 — 19 Output fall time t THL 6.0 — — 13 —16 ns Input capacitance Cin — — 5 10 — 10 pFTest CircuitWaveformsPackage Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> 2-796-3115, Fax: <82> 2-796-2145Renesas Technology Malaysia Sdn. Bhd.Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510。

HD74AC107/HD74ACT107Dual JK Flip-Flop (with Separate Clear and Clock)ADE-205-363 (Z)1st. EditionSep. 2000 DescriptionThe HD74AC107/HD74ACT107 dual JK master/slave flip-flops have a separate clock for each flip-flop. Inputs to the master section are controlled by the clock pulse. The clock pulse also regulates the state of the coupling transistors which connect the master and slave sections. The sequence of operation is as follows: 1) isolate slave from master; 2) enter information from J and K inputs to master; 3) disable J and K inputs;4) transfer information from master to slave.Features• Outputs Source/Sink 24 mA• HD74ACT107 has TTL-Compatible InputsPin ArrangementHD74AC107/HD74ACT1072Logic SymbolPin NamesJ 1, J 2, K 1, K 2Data InputsCP 1, CP 2Clock Pulse Inputs (Active Falling Edge)C D1, C D2Direct Clear Inputs (Active Low)Q 1, Q 2, Q 1, Q 2OutputsTruth TableInputs Outputs @ t n @ t n + 1J K Q L L Qn L H L H L H H HQ nH :High Voltage Level L :Low Voltage Levelt n :Bit time before clock pulse.t n + 1:Bit time after clock pulse.HD74AC107/HD74ACT1073Logic DiagramDC Characteristics (unless otherwise specified)ItemSymbol Max Unit ConditionMaximum quiescent supply current I CC 40µA V IN = V CC or ground, V CC = 5.5 V,Ta = Worst caseMaximum quiescent supply current I CC 4.0µA V IN = V CC or ground, V CC = 5.5 V,Ta = 25°CMaximum additional I CC /input (HD74ACT107)I CCT1.5mAV IN = V CC – 2.1 V, V CC = 5.5 V Ta = Worst caseHD74AC107/HD74ACT1074AC Characteristics: HD74AC107Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pF ItemSymbol V CC (V)*1Min Typ Max Min Max Unit Maximum clock f max3.3125——100—MHzfrequency 5.0150——125—Propagation delay t PLH 3.3 1.09.513.0 1.014.0ns C P to Q or Q 5.0 1.07.510.0 1.011.0Propagation delay t PHL 3.3 1.010.013.5 1.014.5ns C P to Q or Q 5.0 1.08.010.5 1.011.5Propagation delay t PLH 3.3 1.09.513.0 1.014.0ns C D to Q5.0 1.07.510.0 1.011.0Propagation delay t PHL 3.3 1.09.513.0 1.014.0ns C D to Q 5.01.07.510.01.011.0Note:1.Voltage Range 3.3 is 3.3 V ± 0.3 VVoltage Range 5.0 is 5.0 V ± 0.5 VOperating Requirements: HD74AC107Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pFItem Symbol V CC (V)*1Typ Guaranteed MinimumUnit Setup time t su3.3 3.0 5.5 6.0nsJ or k to C P 5.0 2.0 4.0 4.5Hold time t h3.3–1.50.00.0C P to J or k 5.0–0.50.00.0Pulse width t w 3.3 2.0 5.57.0C P or C D5.0 2.0 4.5 5.0Recovery time t rec 3.3 1.5 3.0 3.0C D to C P 5.01.03.03.0Note:1.Voltage Range 3.3 is 3.3 V ± 0.3 VVoltage Range 5.0 is 5.0 V ± 0.5 VHD74AC107/HD74ACT1075AC Characteristics: HD74ACT107Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pF ItemSymbol V CC (V)*1Min Typ Max Min Max Unit Maximum clock frequency f max 5.0100——80—MHz Propagation delay C P to Q or Q t PLH 5.0 1.09.512.5 1.013.5nsPropagation delay C P to Q or Q t PHL 5.0 1.010.513.0 1.014.0Propagation delay C D to Qt PLH 5.0 1.08.511.0 1.012.0Propagation delay C D to Q t PHL5.01.08.511.01.012.0Note:1.Voltage Range 5.0 is 5.0 V ± 0.5 VOperating Requirements: HD74ACT107Ta = +25°C C L = 50 pFTa = –40°C to +85°C C L = 50 pFItem Symbol V CC (V)*1Typ Guaranteed MinimumUnit Setup time J or k to C P t su 5.0 2.57.08.0nsHold time C P to J or k t h 5.00.0 1.5 1.5Pulse width C P or C Dt w 5.0 4.57.08.0Recovery time C D to C P t rec5.0—3.03.0Note:1.Voltage Range 5.0 is 5.0 V ± 0.5 VCapacitanceItemSymbol Typ Unit Condition Input capacitanceC IN 4.5pF V CC = 5.5 V Power dissipation capacitanceC PD35.0pFV CC = 5.0 VHD74AC107/HD74ACT107 Package Dimensions6HD74AC107/HD74ACT1077HD74AC107/HD74ACT1078Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Hitachi Asia Ltd. Hitachi Tower16 Collyer Quay #20-00, Singapore 049318Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : .sg URLNorthAmerica : /Europe : /hel/ecg Asia : Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.(Taipei Branch Office)4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TPURL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre,Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong KongTel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281URL : Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 585160Hitachi Europe GmbHElectronic Components Group Dornacher Stra βe 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:Colophon 2.0。

HD74LS240Octal Buffers / Line Drivers / Line Receivers(inverted three-state outputs)REJ03D0459–0200Rev.2.00Feb.18.2005 Features• Ordering InformationPart Name Package Type Package Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74LS240P DILP-20pin PRDP0020AC-B(DP-20NEV)P —HD74LS240FPEL SOP-20 pin (JEITA) PRSP0020DD-B(FP-20DAV)FP EL (2,000 pcs/reel)HD74LS240RPEL SOP-20 pin (JEDEC) PRSP0020DC-A(FP-20DBV)RP EL (1,000 pcs/reel)Note: Please consult the sales office for the above package availability. Pin ArrangementFunction TableInputs OutputG A YH X ZL H LL L HNote: H; high level, L; low level, X; irrelevant, Z; off (high-impedance) state of a 3-state outputBlock Diagram (1/2)Absolute Maximum RatingsUnitRatingsItem SymbolSupply voltage V CC 7 VInput voltage V IN 7 VPower dissipation P T 400 mWStorage temperature Tstg –65 to +150 °CNote: Voltage value, unless otherwise noted, are with respect to network ground terminal.Recommended Operating ConditionsMaxUnitMinItem SymbolTypSupply voltage V CC 4.75 5.00 5.25 VI OH — — –15 mAOutput currentI OL — — 24 mA°C75Operating temperature Topr–2025Electrical Characteristics(Ta = –20 to +75 °C)ItemSymbol min. typ.* max. Unit Condition V IH 2.0 — — VInput voltageV IL — — 0.8 V Hysteresis V T + – V T –0.2 0.4 — V V CC = 4.75 V2.4 — — V IL = 0.8 V, I OH = – 3 mA V OH 2.0 — — VV IL = 0.5 V, I OH = – 15 mA V CC = 4.75V, V IH = 2 V— — 0.4 I OL = 12 mA Output voltageV OL — — 0.5 VI OL = 24 mA V CC = 4.75 V, V IH = 2 V,V IL = 0.8 V I OZH — — 20 µA V O = 2.7 V Off-state output currentI OZL — — –20 µA V O = 0.4 VV CC = 5.25 V, V IH = 2 V, V IL = 0.8 V I IH — — 20 µA V CC = 5.25 V, V I = 2.7 V I IL — — –0.2 mA V CC = 5.25 V, V I = 0.4 VInput current I I —— 0.1 mA V CC = 5.25 V, V I = 7 V Short-circuit outputcurrentI OS –40— –225 mA V CC = 5.25 V Outputs high— 13 23Outputs low— 26 44Supply current**All outputsdisabledI CC— 29 50mA V CC = 5.25 V Input clamp voltage V IK — — –1.5 V V CC = 4.75 V, I IN = –18 mA Notes: * V CC = 5 V, Ta = 25°C ** I CC is measured with all outputs open.Switching Characteristics(V CC = 5 V, Ta = 25°C)Item Symbol min. typ. max. Unit Conditiont PLH — 9 14Propagation delay time t PHL — 12 18nst ZL — 20 30 nsOutput enable timet ZH — 15 23 ns C L = 45 pF, R L = 667 Ωt LZ — 15 25 nsOutput disable time t HZ — 10 18 ns C L = 5 pF, R L = 667 ΩNote: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D0005-0100)".Package Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001。

HD74HC5928-bit Register/Binary CounterADE-205-513 (Z)1st. EditionSep. 2000 DescriptionThe HD74HC592 consists of a parallel input, 8-bit storage register feeding an 8-bit binary counter. Both the register and the counter have individual positive edge-triggered clocks. In addition, the counter has direct load and clear functions. Expansion is easily accomplished by connecting RCO of the first stage to the count enable of the second stage, etc.Features• High Speed Operation: t pd (CCK to RCO) = 24 ns typ (C L = 50 pF)• High Output Current: Fanout of 10 LSTTL Loads• Wide Operating Voltage: V CC = 2 to 6 V• Low Input Current: 1 µA max• Low Quiescent Supply Current: I CC (static) = 4 µA max (Ta = 25°C)Function TableInputsRCK CLoad CCLR CCKEN CCK FunctionX L H X X Regiater data loaded into counterX H L X X Counter clearX H H H X No contRCO = QA’•QB’•QC’•QD’•QE’•QF’•QG’•QH’• (CCKEN) (QA’ to QH’: Output of Internal Counter)HD74HC592 Pin Arrangement2Logic DiagramHD74HC592HD74HC5924DC CharacteristicsTa = 25°CTa = –40 to +85°CItem Symbol V CC (V)Min Typ Max MinMax Unit Test ConditionsInput voltageV IH2.0 1.5—— 1.5—V4.5 3.15—— 3.15—6.04.2—— 4.2—V IL2.0——0.5—0.5V 4.5—— 1.35—1.356.0——1.8— 1.8Output voltageV OH2.0 1.9 2.0— 1.9—VVin = V IH or V IL I OH = –20 µA4.5 4.4 4.5— 4.4—6.05.96.0— 5.9—4.5 4.18—— 4.13—I OH = –4 mA 6.05.68——5.63—I OH = –5.2 mAV OL2.0—0.00.1—0.1VVin = V IH or V IL I OL = 20 µA4.5—0.00.1—0.16.0—0.00.1—0.14.5——0.26—0.33I OL = 4 mA 6.0——0.26—0.33I OL = 5.2 mAInput current Iin 6.0——±0.1—±1.0µA Vin = V CC or GNDQuiescent supply currentI CC6.0——4.0—40µAVin = V CC or GND, Iout = 0 µAHD74HC5925AC Characteristics (C L = 50 pF, Input t r = t f = 6 ns)Ta = 25°CTa = –40 to +85°CItemSymbol V CC (V)Min Typ Max MinMax Unit Test ConditionsMaximum clock f max2.0——5—4MHzfrequency4.5——25—206.0——29—24Propagation delay t PLH 2.0——200—250nsCCK to RCOtimet PHL 4.5—2440—506.0——34—43t PLH 2.0——200—250nsC Load to RCOt PHL 4.5—2740—506.0——34—43t PLH 2.0——200—250nsCCLR to RCO4.5—2640—506.0——34—43t PLH 2.0——300—375nsRCK to RCOt PHL4.5—2960—756.0——51—64Pulse widtht w2.080——100—ns 4.5168–20—6.014——17—Removal timet rem2.0100——125—nsCCLR to CCK4.52012—25—6.017——21—Setup timet su2.0100——125—nsCCKEN to CCK4.5200—25—6.017——21—2.0200——250—nsCCK to RCK4.54014—50—6.034——43—Output rise/fall t TLH 2.0——75—95ns timet THL 4.5—515—196.0——13—16Input capacitanceCin——510—10pFHD74HC592 Package Dimensions6HD74HC5927Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.Hitachi Asia Ltd. Hitachi Tower16 Collyer Quay #20-00, Singapore 049318Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877URL : .sg URLNorthAmerica : /Europe : /hel/ecg Asia : Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.(Taipei Branch Office)4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TPURL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre,Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong KongTel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281URL : Hitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 585160Hitachi Europe GmbHElectronic Components Group Dornacher Stra βe 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:Colophon 2.0。

HD74AC04Hex InverterREJ03D0241–0200Z(Previous ADE-205-357 (Z))Rev.2.00Jul.16.2004 Features•Outputs Source/Sink 24 mA•Ordering InformationPart Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74AC04P DIP-14 pin DP-14, -14AV P —HD74AC04FPEL SOP-14 pin (JEITA) FP-14DAV FP EL (2,000 pcs/reel)HD74AC04RPEL SOP-14 pin (JEDEC) FP-14DNV RP EL (2,500 pcs/reel)HD74AC04TELL TSSOP-14 pin TTP-14DV T ELL (2,000 pcs/reel)Notes: 1. Please consult the sales office for the above package availability.2. The packages with lead-free pins are distinguished from the conventional products by adding V at the end ofthe package code.Pin ArrangementAbsolute Maximum RatingsItemSymbol RatingsUnit Condition Supply voltageV CC –0.5 to 7V –20mA V I = –0.5V DC input diode current I IK 20mA V I = Vcc+0.5V DC input voltage V I –0.5 to Vcc+0.5V –50mA V O = –0.5V DC output diode current I OK 50mA V O = Vcc+0.5VDC output voltageV O –0.5 to Vcc+0.5V DC output source or sink current I O±50mA DC V CC or ground current per output pin I CC , I GND ±50mA Storage temperatureTstg–65 to +150°CRecommended Operating ConditionsItemSymbol RatingsUnitConditionSupply voltageV CC 2 to 6V Input and output voltage V I , V O 0 to V CC V Operating temperature Ta –40 to +85°C V CC = 3.0V V CC = 4.5 V Input rise and fall time (except Schmitt inputs)V IN 30% to 70% V CCtr, tf8ns/VV CC = 5.5 VDC CharacteristicsTa = 25°C Ta = –40 to +85°C ItemSym-bol Vcc (V)min.typ.max.min.max.UnitCondition3.0 2.1 1.5— 2.1—4.5 3.15 2.25— 3.15—V IH5.53.85 2.75— 3.85—V OUT = 0.1 V or V CC –0.1 V3.0— 1.500.9—0.94.5— 2.25 1.35— 1.35Input Voltage V IL5.5— 2.75 1.65— 1.65VV OUT = 0.1 V or V CC –0.1 V3.0 2.9 2.99— 2.9—4.5 4.4 4.49— 4.4—5.5 5.4 5.49— 5.4—V IN = V IL or V IH I OUT = –50 µA 3.0 2.58—— 2.48—I OH = –12 mA 4.53.94—— 3.80—I OH = –24 mA V OH5.5 4.94—— 4.80—V IN = V IL or V IHI OH = –24 mA3.0—0.0020.1—0.14.5—0.0010.1—0.15.5—0.0010.1—0.1V IN = V IL or V IH I OUT = 50 µA 3.0——0.32—0.37I OL = 12 mA 4.5——0.32—0.37I OL = 24 mA Output voltageV OL5.5——0.32—0.37VV IN = V IL or V IHI OL = 24 mAInput leakage currentI IN 5.5——±0.1—±1.0µA V IN = V CC or GND I OLD 5.5———86—mA V OLD = 1.1 V Dynamic output current *I OHD5.5———–75—mA V OHD = 3.85 V Quiescent supply currentI CC 5.5—— 4.0—40µA V IN = V CC or ground*Maximum test duration 2.0 ms, one output loaded at a time.AC CharacteristicsTa = +25°CCL = 50 pFTa = –40°C to +85°CCL= 50 pFItem Symbol VCC(V)*1Min Typ Max Min Max UnitPropagation delay tPLH3.3 1.04.59.0 1.010.0ns5.0 1.0 4.07.0 1.07.5Propagation delay tPHL3.3 1.04.58.5 1.09.5ns5.0 1.0 3.56.5 1.07.0Note: 1.Voltage Range 3.3 is 3.3 V ± 0.3 VVoltage Range 5.0 is 5.0 V ± 0.5 VCapacitanceItem Symbol Typ Unit ConditionInput capacitance CIN 4.5pF VCC= 5.5 VPower dissipation capacitance CPD 30.0pF VCC= 5.0 VPackage Dimensions RENESAS SALES OFFICESRenesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500 Fax: <1> (408) 382-7501Renesas Technology Europe Limited.Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United KingdomTel: <44> (1628) 585 100, Fax: <44> (1628) 585 900Renesas Technology Europe GmbHDornacher Str. 3, D-85622 Feldkirchen, GermanyTel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11Renesas Technology Hong Kong Ltd.7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong KongTel: <852> 2265-6688, Fax: <852> 2375-6836Renesas Technology Taiwan Co., Ltd.FL 10, #99, Fu-Hsing N. Rd., Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001© 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.Colophon .1.0。