下载文档原格式
Performance & UseThe NETGEAR Difference - JNR1010Overview• N150 WiFi speed—Perfect for surfing the Internet, email, and online chat• External 5dBi antenna for improved WiFi coverage• WiFi range for medium-sized homes• Push ’N’ Connect • Guest network accessN150 Wireless RouterData Sheet JNR1010The NETGEAR N150 Wireless Router enables N150 WiFi speed for surfing the Internet, email and online chat. Features include an external 5dBi antenna for improved WiFi coverage, guest network access and Push ’N’ Connect.for a fast connected home.WiFi RangeRANGE—For medium-sized homesGood WiFi Range Homes come in all shapes and sizes and the N150 WiFi Router provides good WiFi connectivity throughout your home for your Internet-enabled devices.N150 Wireless RouterData Sheet JNR1010Relive memories and share them with others. Enjoy photos, videos and music. If it's secure and shared storage access you want NETGEAR has easy ways to do it.SharingWIRELESS-N —Email, chat, surf,music, videoShare & stream your movies, music, photos Start enjoying your router faster than ever.NETGEAR wants to make sure installation and management is simple and easy, so you canconnect quickly and make sure you stay that way!Maintain the highest security across your networkto ensure your Internet experience is safe. Whether it’s preventing phishing and spyware or just limiting access for guests, NETGEAR has you covered.With the N150 Wireless Router create a better home network with a fast reliable connection to the Internet and a secure wireless connection.Ease Of UseSecurityApplicationsEASY INSTALL—Easy setup for iPad ®, tablets, smartphones & computersEMAIL, CHAT, SURF, MUSIC, VIDEO—Enjoy a fast, reliable and secure wireless connection to the InternetGUEST NETWORK ACCESS—Separate & secure WiFi access for guests PUSH ‘N’ CONNECT —Easy push button WiFi connections (WPS)1SECURE WIFI CONNECTIONS—Highest level wireless security with WPA/WPA2Simple network management Safeguard your network Ideal UsesN150 Wireless Router Data SheetJNR1010 Connection DiagramPowerBroadbandmodemWPS/ResetDesktop PCsand notebooksThis product comes with a limited warranty that is valid only if purchased from a NETGEAR authorised reseller.*24/7 basic technical phone support provided for 90 days from purchase date.†Maximum wireless signal rate derived from IEEE 802.11 specifications. Actual data throughput and wireless coverage will vary and may be lowered by network and environmental conditions, including network traffic volume and building construction. NETGEAR makes no representations or warranties about this product’s compatibility with future standards.1Works with devices supporting Wi-Fi Protected Setup ® (WPS).The country settings must be set to the country where the device is operating. Intended for indoor use only in EU member states, EFTA states, and Switzerland.NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. ©2014 NETGEAR, Inc. All rights reserved. NETGEAR,Inc.350E.PlumeriaDrive,SanJose,CA95134-1911USA,1-888-NETGEAR(638-4327),E-mail:****************,D-JNR1010v2-1N150 Wireless RouterData Sheet Package Contents• N150 Wireless Router (JNR1010v2)• Quick Start Guide• Power adapter, localized to country of salePhysical Specifications• Dimensions: 177 x 139 x 30 mm (6.9 x 5.5 x 1.2 in)• Weight: 217 g (0.48 lb)Warranty• Warranty localized to country of saleSupport• 24/7 basic technical phone support for 90 days from date of purchaseSystem Requirements• B roadband (cable, DSL) Internet service and modem with Ethernet connection • 802.11 b/g/n 2.4GHz wireless a dapter or Ethernet adapter and cable for each computer •M icrosoft ®Windows ®7, 8, Vista ®, XP, 2000, Mac ® OS, UNIX ®, or Linux ®•M icrosoft ® Internet Explorer ® 5.0, Firefox ® 2.0or Safari ® 1.4 or higher • U se with an N150 Wireless Adapter (WNA1100) for maximum performanceTechnical Specifications• Memory: 4 MB flash and 32 MB RAM • Five (5) (1 WAN, 4 LAN) Fast Ethernet ports • Multiple SSID guest networks(separate security and access restrictions)Security• WiFi Protected Access ® (WPA/WPA2-PSK) and WEP • Double firewall protection (SPI and NAT firewall)• Denial-of-service (DoS) attack preventionStandards• IEEE ® 802.11 b/g 2.4GHz with some n features • F ive (5) 10/100 (1 WAN and 4 LAN) Fast Ethernet p orts with auto-sensing technologyJNR1010。
EMC TESTING PRODUCT OVERVIEWCUSTOMER BASE FOR EMC TESTINGCOMPACT TESTERThe AXOS is an ultra-compact immunity tester that performs all the most commonly used transient immunity tests, including Surge, EFT, Dips/Interrupts, AC/Surge Magnetic Field, Ring Wave and Telecom Surge. Full Compliance and Pre-Compliance tests are performed to meet the requirements of a wide variety of transient immunity standards, including IEC 61000-4-x “CE Mark” Basic standards, IEC 60601 for Medical equipment, and many other IEC, ANSI, ITU, UL and specific product standards.P C D 126AD E C 5D E C 6D E C 7I P 4BP A T 50 AP A T 1000Surge 1.2/50 & 8/20, 5.0kV EFT / Burst 5.0kV Dips & InterruptsSurge magnetic field 61000-4-9Insulation testing 1.2/50, 15kV 3-phase surge 32A 3-phase surge 100A 3-phase EFT/Burst 32A 3-phase EFT/Burst 100ACDNs symmetrical data & control lines CDNs asymmetrical data & control lines Capacitive coupling clampsELECTROSTATIC DISCHARGEThe ONYX simulators by HAEFELY HIPOTRONICS have been specially designed to meet all latest international standards, including IEC61000-4-2 Ed. 2 and are the most ergonomic battery and AC power operated 30kV guns on the market. 16kV and 30kV models available, along with a complete range of accessories that ensure a complete ESD test setup (verification equipment, test tables, coupling planes etc).FEATURESSTANDARDS a 16kV and 30kV models a Touch screen operation a Modulara Automatic polarity switching a Remote control software a Remote triggera Bleed-of Functionalitya Lightweight and portable design a Battery and AC operation a Environmental monitoring a Onboard LED EUT light a Smart key functionsa Contact discharge current flow detection a Self-test functiona IEC 61000-4-2 Ed. 2a IEC613402-1/-2a IEC 801-2a IEC 60571a EN 50155 a ANSI C63.16a ISO 10605a ISO 14304a ITU-T K20a MIL-STD-1512/-1514/-750D/-883a RTCA/DO-160a JEDEC 22-A114A a GR-78/1089-COREThe self test function is a built-in self test routine which checks the HV supply, the impulse capacitor, the HV discharge relays, and the insulation of the entire HV circuitry.Bleed-off functionalityThe so called bleed-off functionality of the ONYX simulator ensures via an integrated relay that the EUT is completely discharged before the next ESD pulse is initiated. This functionality ensures a maximum of test accuracy to the user without the need for a discharge brush.Smart Key OperationThe smart key button is integrated at the upper part of the discharge trigger and has various functions which are defined by the user, enabling you to run a sequence of events according to your testing requirements, and simplify test procedures.The functions include user defined discharge voltages steps, sweep voltage, On/Off LED light, Polarity Switching, control and report function.Compliance & ModularityThe design is based on the requirements of all latest international standards, including the latest IEC 61000-4-2 Ed. 2. R/C module values are available from 50-5000 Ohms and 50-1000pF , which enables users to fully test according to many international standards.Contact Discharge Current Flow Detection & Self T estThe unique NO CONTACT detection circuit function continuously monitors whether ESD pulses are discharged to the EUT , ensures users the test was successful and prevents incorrect test results.ONYX 16n16kV Electrostatic Discharge Simulatorn16kV Air & Contact Dischargen150pF/330Ω standard discharge networkn Exchangeable RC modules to meet variousstandard requirements (IEC, ISO, ANSI, MIL)n Ergonomic design and operation (touch screen) n Rechargeable battery or mains operatedn Smart key functionsn Automatic polarity switchingn Remote triggern Self test functionn Includes: Light rigid carrying case, contact and air discharge tips, mains supply, 2 x rechargeable battery pack with chargerSOFTWAREWhy should you use software to perform ESD tests?Because it makes your life easier and helps to make tests more reliable and reproducible. Benefitsn Windows XP, Windows Vista and Windows 7 compatibilityn Support of USB and optical USB interfacesn Easy-to-use and intuitive creator for test plans and test proceduresn Enhanced and highly flexible reporting capabilitiesn Up-to-date design and navigationn Intuitive operationn Independent test station n High end componentsn Very high result accuracy and precision n Higher voltage level of 7.3kV n Spike frequency up to 110 kHz n IEC/EN61000-4-4 Ed. 3n Unique windows based control and reporting software n Distinctive safety features n Ideal for over testingn Multi-test stationn Covers EFT/Burst, Surge, Dips & Interrupts, Magnetic Field, and Insulation Tests n 5.0kV EFT/Burstn Fully meets all latest standards including IEC/EN61000-4-4 Ed. 3n Ideal for pre-compliance testing and CE markingNOTE: Please refer to the COMPACT section on page 3 for details.All our EFT/Burst generators are 100% compliant to the latest standards, including IEC/EN 61000-4-4 Ed. 3, which is mandatory from April 2012.DISTINCTIVE FEATURESSTAND-ALONECOMPACTEFT/BURSTBursts or EFTs (Electrical Fast Transients) are caused by operation of electro-mechanical switches, motors and distribution switch-gear connected to the power distribution network. A typical burst consists of a large number of recurring impulses at high frequency for a short time period.V 90%50%10%FlexibilityDepending on the actual testing requirements, we offer our customers the choice between stand alone and compact testing equipment.Stand alone equipment allow users to test at levels higher than what is usually required within the standards, making such testers ideal for over-testing purposes.Compact solutions allow users to not only cover the latest eft/burst requirements, but also to carry out surge, dips & interrupts, magnetic field, and insulation tests.EFT SOLUTIONSn 5kV Burst Test Systemn Built according to IEC/EN 61000-4-4 Ed. 2 & 3 as well as to ANSI/IEEE C62.41/45 and C37.90.1n Impulse voltage up to 5kVn Frequency range from 1Hz to 1MHzn IEC, random, continuous and real burst mode n Ramp functionsn Integrated automated single-phase CDN for AC and DC up to 16A EUT mains current n Burst parameters editable during testingn 7.3kV Burst Test Systemn Built according to IEC/EN 61000-4-4 Ed. 2 & 3 as well as to ANSI/IEEE C62.41/45 and C37.90.1n Impulse voltage up to 7.3kVn Frequency range from 1Hz to 100kHzn IEC, random, continuous and real burst mode n Ramp functionsn Integrated automated single-phase CDN for AC and DC up to 16A EUT mains current n Burst parameters editable during testingAXOS SERIESPEFT 8010MANUAL 32A THREE-PHASE COUPLING-DECOUPLING NETWORK FOR EFT TESTING100A THREE-PHASE COUPLING/DECOUPLING NET-WORK FOR EFT TESTINGFP-EFT 32MFP-EFT 100M2n Built according to IEC/EN 61000-4-4 Ed. 2 & 3 and ANSI C62.41/45n Superposition of EFT impulses onto three- phase power lines and DC power lines n 8kV maximum impulse voltage n EUT voltage up to 690V/400V ACn EUT mains current up to 100A per phase n Manual coupling path switchingnSynchronization with power supply possiblen Built according to IEC/EN 61000-4-4 Ed. 2 & 3 as well as to ANSI C62.41/45n Superposition of EFT impulses onto three- phase power lines and DC power linesn 8kV maximum impulse voltagen EUT mains voltage up to 690V/400V AC, 110V DC n EUT mains current up to 32A per phase n Synchronization with power supply possible nEUT over-current protectionEFT VERIFICATION SETWAVEFORM VERIFICATION SETOPTIONSn Built according to IEC/EN 61000-4-4 Ed. 2 & 3 and ANSI C37.90.1n 40mm maximum cable size n Up to 8kV impulse voltage n Handy carrying handlen Optional transducer plate for clamp calibration/ verificationn Built according to IEC/EN 61000-4-4 Ed. 2 & 3n For verification/calibration of EFT generators (PEFT 4010, PEFT 8010, AXOS Series)n Combined 50Ω load, 54 dB attenuator n Combined 1 k Ω load, 60 dB attenuator n Required cables includedn Supplied with detailed application noten IEEE 488 interface optionn Three phase verification adaptersn Warning lamps and emergency switches n Fibre optic links (EUT fail)n Test tablesn Dedicated software WinFEAT&R n Upgrade kits for older modelsnReal burst functional extensionn Optical decoupling fibre optic links (RS232)n AC and DC adaptersn Near field test probes (E&H)n Vertical operation stands VOSSURGE - TRANSIENT / LIGHTNINGPRODUCTS AND APPLICATIONSStand-alone, compact, and modular Surge impulse generators are available up to 30kV , which cover a range of EMC surge tests including the classical IEC defined “Combination Wave“ 1.2/50 & 8/20, “Hybrid waves“ defined for telecommunications testing, 10/700, ring wave, damped oscillating wave, magnetic field, and many more.Typical standard applications include IEC, EN and ANSI for power line testing, FCC, Bellcore, ITU and ETSI for telecom testing.Our modular Surge Platform can also be used for product safety testing to UL standards and also ITE requirements. A wide range of accessories from single and three phase CDNs up to 100A and telecoms coupling units, make these systems the most modular and flexible test equipment on themarket.32A THREE-PHASE COUPLING/DECOUPLING NETWORK FOR SURGE TESTINGFP-COMB 32n Built according to IEC/EN 61000-4-5 Ed. 2 & 3n EUT voltage up to 480Vn EUT current up to 32A per phasenTest level max. 7.0kV / 3.5kA n Fully automatic test routinesn Automatic synch source switching n Test object power line bypass mode n Test object overcurrent protection15KV VOLTAGE SURGE GENERATORPS 1500n Built according to IEC/EN 60065,IEC/EN 60950-1 and UL 1414n Impulse voltage up to 15kV n Up to 24 discharges per minute n Positive and Negative Polarity n External trigger inputn Automatic selection of 4M Ω/100 M Ω parallel resistor n Impulse voltage monitor n Includes test pistol n Flash measurement n Insulation/safety testing n Component testingn Small and compact design30KV SURGE TEST SYSTEMSINGLE-PHASE COUPLING/DECOUPLING NETWORKFOR SURGE TESTING UP TO 30KV / 15KAPSURGE 30.2FP-SURGE 3010n Single-phase EUT powering n EUT mains voltage up to 480V n EUT mains current up to 10An Manual selection of coupling path and coupling capacitor n Test level up to 15kV/30kA n EUT overcurrent protection n Large integrated test cabinetn Built according to IEC/EN61000-4-5, IEC/EN 61010, IEC/EN 61643-1 and ANSI C62.41/45n Impulse voltage up to 30kV (combination wave)n Impulse current up to 30kA (8/20 µs)n Combination wave (1.2/50 µs & 8/20 µs)n 8/20 µs, 10/350 µs, 10/1000 µs current pulse n Impulse voltage & current measurement n Automatic polarity switching n Integrated test cabinetPIM 100PIM 110COMBINATION WAVE IMPULSE MODULERING WAVE IMPULSE MODULEn Built according to IEC/EN 61000-4-5 Ed. 1 & 2 and ANSI C62.41/45n 1.2/50 µs open circuit up to 7.4kV n 8/20 µs short circuit up to 3.7kAnImpulse voltage and current monitors n *1° Phase synchronizationn Reliable semiconductor HV-switchn Positive, negative and alternating polarity n Up to 12 pulses per minuten Built according to IEC/EN 61000-4-12 and ANSI C62.41/45n 100 kHz frequency, 0.5 µs rise time n Imp. voltage up to 7.8kV / 12 Ω, 30 Ω and 200 Ωn Impulse voltage and current monitors n *1° phase synchronizationn Positive, negative and alternating polarity n Up to 12 pulses per minuten Reliable semiconductor HV-switch100A THREE-PHASE COUPLING/DECOUPLING NETWORKMANUAL SURGE COUPLING UNIT FOR SYMMETRICAL DATA AND CONTROL LINESPCD 121n Built according to IEC/EN 61000-4-5 Ed. 2 Fig. 14 & Ed. 3 Fig. 10n Coupling of Combination Wave impulses n Up to 2 pairs / 4 wires can be testedn Serial resistors included, 4 x 40/80/160 Ohm n Gas arrestors and Avalanche Breakdown Diodes coupling elements included n Can be used with any surge generator n Impulse voltage up to 6.6kVnSignal Bandwidth up to > 10 MHzPCD 122MANUAL SURGE COUPLING UNIT FOR SYMMETRICAL DATA AND CONTROL LINESn Built according to IEC/EN 61000-4-5 Ed. 2 Fig. 14 & Ed. 3 Fig. 10n Coupling of 10/700 µs impulsesn Up to 2 pairs / 4 wires can be testedn Serial resistors included, 4 x 25/50/100 Ohmn Gas arrestors and Avalanche Breakdown Diodes coupling elements included n Can be used with any surge generator n Impulse voltage up to 6.6kVn Signal Bandwidth up to > 10 MHz.MANUAL SURGE COUPLING/DECOUPLING UNIT FOR DATA AND SURGE DECOUPLING UNIT FOR SYMMETRICAL DATAn Signal Bandwidth up to some 10MHzDEC 7SURGE DECOUPLING UNIT FOR ASYMMETRICAL DATA AND CONTROL LINESn Built according to:IEC/EN 61000-4-5 Ed. 2 Fig. 11, 12 & 13 & Ed. 3 Fig. 9IEC 61000-4-12:1995 Fig. 9, 10, 13 & 14 Array n Decoupling of Combination wave impulsesn Decoupling of Ring Wave (100kHz) impulsesn Up to four wire can be tested simultaneousn Decoupling: Inductors 20mH not compensatedn Protection elements are Varistors and Breakdown avalanche diodesn Can be used with any surge generatorn Impulse voltage up to 6.6kVn Signal Bandwidth up to some 100 HzLOW ENERGY IMPULSE TRANSFORMER FOR INSULATION TESTING NETWORK FOR SURGE PLATFORMPOWER FREQUENCY MAGNETIC FIELD TEST SYSTEMMAG 1000n Built according to IEC/EN 61000-4-8n 1m x 1m antenna included w/ stand n Up to 1100A/m field strength n Horizontal and Vertical testingn Continuous and short duration testing n Built in power supply at 50/60Hz n Simple interfaceMSURGE-APULSE MAGNETIC FIELD TEST SYSTEMnBuilt according to IEC/EN 61000-4-9n 8/20µs magnetic field wave shape n Up to 3000A/m field strength n Sturdy constructionn Horizontal and vertical testingn Control from HAEFEL Y surge generators n Single turn coil with 1m x 1m square area n Optional 2m x 2.6m magnetic coilDip: decrease of the mains VoltageSOFTWAREThe WinFEAT&R software is the latest generation of control and reporting software, based on a modern Drag and Drop concept. With such ease of use, even users with minimum technical experience will be carrying out tests in no time.This unique software allows users to run user specified or pre-defined tests according to the latest standards, and monitors and displays real time output current and voltage values.Communication between software and oscilloscope monitoring allows screenshots to be added to the test report.The software runs up to Windows 7 and is compatible with all stand-alone HAEFEL Y HIPOTRONICS test generators.FEATURESn Control and reporting for stand-alone EFT/Burst, Surge, Dips& Interrupts generators.n Drag and Drop applicationn User defined tests can be added and pre-defined tests arealready included (according to the standards).n Output Current/Voltage monitoring during test.n EUT supervision (max/min V/I levels).n User friendly, designed for use by users with minimumtechnical experience.n Automatic synchronization between software and PC.n Test setup uploaded to Oscilloscope.n User defined test report with oscilloscope screenshotoption.n Fully compatible with Windows 7 (32-bit/64-bit)A u g u s t 2013EuropeChinaNorth America Haefely T est AG Haefely T est AG Representative Beijing OfficeHipotronics, Inc.Birsstrasse 300 8-1-602, Fortune Street1650 Route 22 N 4052 Basel No. 67, Chaoyang Road, Chaoyang DistrictBrewster, NY 10509SwitzerlandBeijing, China 100025United States☎ + 41 61 373 4111 ☎ +86 10 8578 8099 ☎ +1 845 230 9245 + 41 61 373 4912+86 10 8578 9908 +1 845 279 2467emc-**********************************.cn*********************HAEFEL Y HIPOTRONICS has a policy of continuous product improvement. We therefore reserve the right to change design and specification without notice.OFFICES:。
漫步者原子豆编解码【最新版】目录1.漫步者原子豆编解码器介绍2.编解码器的原理与特点3.应用范围与实际效果4.总结正文漫步者原子豆编解码器是一款性能出色的音频处理设备，适用于音乐制作、影视后期制作等领域。
它能够实现音频信号的高质量编解码，提供高品质的音频体验。
编解码器的原理是通过对音频信号进行数字信号处理，将模拟音频信号转换成数字信号，以便于存储和传输。
在播放时，再将数字信号转换回模拟信号。
这种处理方式能够有效地降低音频信号在传输过程中的损耗，保证音频质量。
漫步者原子豆编解码器采用了先进的数字信号处理技术，确保了音频信号的高保真度。
漫步者原子豆编解码器具有如下特点：1.高采样率：编解码器支持高达 32 位的采样率，使得音频信号的细节表现更加丰富，提高了音频质量。
2.高比特深度：比特深度是指音频信号的数字量化精度，漫步者原子豆编解码器支持高达 24 位的比特深度，使得音频信号的表现更加细腻，降低了数字失真。
3.多种格式支持：编解码器支持多种音频格式，包括 MP3、WAV、FLAC 等，满足用户不同的需求。
4.便捷的操作：漫步者原子豆编解码器采用一体化的设计，用户只需连接音频设备即可使用，无需复杂的设置。
漫步者原子豆编解码器在音乐制作、影视后期制作等领域有广泛的应用。
在音乐制作中，编解码器能够提供高品质的音频信号，使得音乐作品的表现更加细腻丰富。
在影视后期制作中，编解码器能够确保音频信号的高质量，提升观众的观影体验。
总的来说，漫步者原子豆编解码器是一款性能出色的音频处理设备，能够实现音频信号的高质量编解码，提供高品质的音频体验。
![声雅CD―S10CSHDCD播放机A10CS胆石混血合并式放大器[Word文档]](https://uimg.taocdn.com/8edf1935182e453610661ed9ad51f01dc381575e.webp)
声雅CD―S10CS HDCD播放机+A10CS胆石混血合并式放大器关键字：声雅CD―S10CS HDCD播放机+A10CS胆石混血合并式放大器本文为Word文档，感谢你的关注！用来欣赏纯音乐的音响器材无非是三大件：音箱、放大器、CD播放机。
但是，最终由三大件搭配之后产生的音质，并不象算术题1+1+1=3那么简单，要在不同品牌不同型号的各类器材之间找到恰恰合适的并不容易。
不过呢，倒是有一个比较轻松省心、搭配结果又有保证的方法，那就是：购买同一厂家的音箱、放大器、CD播放机，象这样的“一套西装”不仅声音上面已经经过原厂的调声确保音质，另外在外观和价格方面也是同一风格和同一档次，而且试听起来也非常方便，可以说是十分合理的一种购买、使用的方式。
在国内的音响厂家中，有能力同时提供音箱、放大器、CD播放机的并不多，声雅公司便是其中的少数之一，这次试用的便是CD机和放大器的组合：CD-S10CS CD播放机和A10CS合并式放大器。
这两个型号是否似曾相识呢？没错，它们实际是原CD-S10播放机（评介参见本刊2002年10期）和A10放大器（评介参见本刊2002年3期）的改进型号。
CD-S10和A10作为同一系列的产品，最明显的特征便是模拟放大输出部分都采用了真空电子管。
在“胆输出”和“胆石混合放大”这一方面，声雅公司是国内音响厂家中坚持得最好的之一，利用电子管输出或放大所特有的透明、细腻、自然的声音表现来提升整机的音质，起到调音的作用，由于效果明显，受到不少好评。
CD-S10CS和A10CS作为CD-S10和A10的升级改进版，在保持原有基本电路设计不变的前提下，除了外观上略有改动之外，内部的一些元器件使用了更为高级的型号，整体性能指标大大提高，而售价也较原型机增加了1/2，应该算是两款有实际意义的升级版。
下足猛料的CD播放机首先来看看CD-S10CS，与原型CD-S10相比，外观没有多大的变动，也是正中一个可以看到内部电子管的圆形窗口，再加上左右两侧的长条形镜面，轻触式操作按键设在面板下部。
ioLogik E2200系列具備Click&GO邏輯的智慧乙太網路遠端I/O特色與優點•具備專利Click&Go控制邏輯的前端智慧，多達24項規則•與MX-AOPC UA伺服器進行的主動通訊•透過點對點通訊節省時間和接線成本•支援SNMP v1/v2c/v3•透過網頁瀏覽器輕鬆完成配置•使用Windows或Linux版MXIO程式庫簡化I/O管理•支援寬溫工作環境，適合-40至75°C（-40至167°F）環境認證簡介Moxa的ioLogik E2200系列乙太網路遠端I/O是PC型資料擷取和控制裝置，使用基於事件的主動報告來控制I/O裝置，並採用Click&Go程控介面。
不同於被動而且必須輪詢資料的傳統PLC，Moxa的ioLogik E2200系列與我們的MX-AOPC UA伺服器配對時，將使用主動訊息與SCADA系統進行通訊，該訊息僅在發生狀態變更或配置事件時推送到伺服器。
此外，ioLogik E2200配備使用NMS（網路管理系統）進行通訊和控制的SNMP，IT專業人員可以將裝置配置為按照已配置的規格推送I/O狀態報告。
這種在例外狀況發生時進行報告的方法是基於PC的監控的新方法，相較於傳統輪詢方法，這需要的頻寬更少。
免PC告警和控制智慧這個裝置支援簡單而強大的Click&Go™技術，可配置透過電子郵件、TCP/UDP或SNMP陷阱傳送的事件驅動報告和告警，為您提供強大而有效的工具，以即時傳送有時間戳記的狀態更新。
藉由內建的Click&Go™智慧，可以對於與簡單輸入觸發條件配對的簡單輸出配置這個裝置，而不需要PC控制器。
這個裝置由於這項特點而能夠按照使用者指定的條件自動報告I/O事件。
用於乙太網路裝置管理的SNMP藉由使用SNMP，IT工程師可以將裝置配置為針對特定I/O事件傳送告警(SNMP trap)，或用來直接讀取或寫入I/O暫存器。
TW10a10寸2路全频有源专业扬声器系统CN产品说明书UM-T W10a-20180423V e r B感谢您购买 产品！请仔细阅读本手册，它将帮助你妥善设置并运行您的系统，使其发挥卓越的性能。
并保留这些说明以供日后参照。
警告：为了降低火灾与电击的风险，请不要将产品暴露在雨中或潮湿环境中。
警告：为了降低电击的风险，非专业人士请勿擅自拆卸该系统。
仅供专业人士操作。
等边三角形中的闪电标记，用以警示用户该部件为非绝缘体，系统内部存在着电压危险，电压。
可能足以引起触电。
可能足以引起触电如系统标有带惊叹号的等边三角形，则是为提示用户严格遵守本用户指南中的操作与维护规定。
注意：请勿对系统或附件作擅自的改装。
未经授权擅自改装将造成安全隐患。
警告：燃不得将明火源(如点的蜡烛)放在器材上面。
1. 请先阅读本说明。
2. 保留这些说明以供日后参照。
3. 注意所有警告信息。
4. 遵守各项操作指示。
5. 不要在雨水中或潮湿环境中使用本产品。
6. 不要将产品靠近热源安装，例如暖气管、加热器、火炉或其它能产生热量的装置（包括功放机 ）。
7. 不要破坏极性或接地插头的安全性设置。
如果提供的插头不能插入插座，则应当请专业人员更换插座。
8. 保护好电源线和信号线，不要在上面踩踏或拧在一起（尤其是插头插座及穿出机体以外的部分 ）。
9. 使用厂商规定及符合当地安全标准的附件。
10.雷电或长时间不使用时请断电以防止损坏产品。
12. 不要让物体或液体落入产品内——它们可能引起火灾或触电。
13. 请注意产品外罩上的相关安全标志。
. 仅与厂商指定或与电器一同售出的推车、架子、三脚架、支架或桌子一起使用。
推动小车电/器时，应谨防翻倒。
11注意事项产品的安装调试须由专业人士操作。
在使用非本厂规定的吊装件时，要保证结构的强度并符合当地的安全规范。
警告：1扬声器及扬声器系统的产品有限保修期为自正式购买日起的3年。
由于用户不合理的应用而导致音圈烧毁或纸盆损坏等故障，不包含于产品保修项目。
海康威视IP SAN/NAS监控存储解决方案海康威视IP SAN/NAS存储解决方案杭州海康威视数字技术有限公司杭分公司二〇〇九年六月目录1.基本需求 (5)1.1DVR/DVS需求 (5)1.2容量计算公式 (5)1.3容量计算 (5)1.4集中式共享存储 (6)1.5数据可靠性 (6)1.6可扩展性 (7)1.7高性能 (7)1.8网络需求 (7)2.解决方案 (8)2.1.方案选择 (8)2.1.1.DVR直接存储 (8)2.1.2.NAS附网存储 (8)2.1.3.IP存储网络 (8)2.2.方案描述 (9)2.2.1.系统原理图 (10)2.3.存储技术参数 (11)2.3.1.存储配置 (11)2.4.方案分析 (17)2.4.1.监控专用存储系统，充分满足性能要求 (17)2.4.2.同时提供IP SAN和NAS (17)2.4.3.极易管理（全中文） (18)2.4.4.独有安全技术 (18)2.4.5.高可扩充性 (18)2.4.6.高性价比 (19)2.4.7.数据存储的高可靠性和可用性 (19)3.DS-A20系列IP SAN/NAS存储产品 (20)4.DS-6X00HC/HF视频服务器 (23)4.1.产品概述 (23)4.2.订货型号 (23)4.3.硬件接口 (23)4.4.技术参数 (24)5.DS-6X00HC/HF-ATA视频服务器 (26)5.1.产品概述 (26)5.2.订货型号 (26)5.3.物理接口 (26)5.4.技术参数 (27)5.5.DS-2DF1-6XY系列网络球机 (28)1. 基本需求某银行需要64路视频监控系统，7*24小时监控，数据保存3个月便可以覆盖。
存储方案采用IP SAN/NAS 集中存储。
采用4CIF 格式，1Mbps 码流。
1.1 DVR/DVS 需求➢ 64路➢ 图象分辨率: 1Mpbs➢ 7*24小时➢ 保存时间：90天1.2 容量计算公式第一步：根据式（1）计算单个通道每小时所需要的存储容量i q , 单位MByte 。
DVS-N1010网络视频编解码服务器使用说明书友讯电子设备（上海）有限公司目录一、前言 (3)二、产品规格及说明 (3)三、产品的安装 (5)(一)硬件安装 (5)( 二 )IP地址分派 (6)( 三 )显卡器设置 (8)( 四 )安装ActiveX控件 (9)四、操作模式 (10)五、DVS-N1010设置 (13)网络设定 (13)PPPOE设定 (14)DDNS设定 (15)无线网络设定 (15)视频接收设定 (17)影像调整设置 (18)影像格式和声音设定 (19)邮件及FTP设定 (20)事件设定 (21)时间日期设置 (22)SD卡设定 (23)I/O输入输出 (24)注销 (24)系统设置 (25)系统备份和复位 (26)系统更新 (27)注销 (27)设备基本状态 (28)系统操作历史记录浏览 (28)注销 (29)六、网络配置 (29)七、恢复出厂设置 (30)八、联系方式 (31)一、前言z DVS-N1010为一Mpeg4 Video Server 1 channel双功能的安控产品。
DVS-N1010本身内建网络服务器。
z就Video Server而言，它将传统的摄影机模拟信号数字化，使用者可透过浏览器实时浏览远程影像。
MPEG-4压缩格式可提供流畅的影像质量压缩。
内建SD储存媒体的功能也可以储存影像，并提供远程回放的功能。
双向语音也可以当作一简易型视讯会议的工具。
使用者可以透过简易的图形接口远程管理此一Video Server，可轻松的架构一居家型安全监控系统。
二、产品规格及说明z使用MPEG4压缩格式z支持SD卡远端录影功能z远程云台控制z无线网络连接 (802.11b/g)（支持）z双向语音z支持线上软体更新z支持网上即时A VI动态录影z兼容Microsoft Windows Media Player产品规格HardwareCPU ARM 9 ,32 bit RISCRAM 64MBROM 8MBVideo in / Video Server 1-ch BNC type, (CBVS Camera input)Video out / Video Decoder 1-ch BNC type (CBVS Monitor output)Audio in/ out 1 in/ 1 out (RCA type)Alarm I/O 2 in/ 4 outRS-485 2-pin Terminal, for PTZ controlPower Consumption Lan: 12V, 300mA Wlan: 12V, 400mADimensions (W×H×D) 133×42×107mmNetworkEthernet 10/ 100 Base-TWireless (Optional) 802.11b/gWEP 64/ 128 bitNetwork Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP, DDNS, NTPVideo EncodingVideo Resolution NTSC: 720x480, 704x480, 352x240, 176x120 PAL: 720x576, 704x576, 352x288, 176x144Image snapshot YesFull screen monitoring YesCompression format MPEG-4/JPEGVideo bit rate adjust CBR, VBRMotion Detection Yes, 3 different areasTriggered action Mail, FTP, Save to SD cardPre/ Post alarm Yes, configurableRemote PTZ control YesVideo DecodingVideo Output Resolution D1/ VGA/ CIF/ QCIFDecompression Format MPEG4/ M-JPEGTV Out YesOutput OSD YesStream Server IP Camera, Video Server, DVRSystemSecurity Password protectionFirmware upgrade HTTP mode, can be upgraded remotelySimultaneous connection Up to 10SD card managementRecording trigger Motion Detection, IP check Network down (Wire connection only) Video format AVI, JPEGVideo playback YesFile Management Yes, can be deleted or overwriteWeb browsing requirementOS Windows 2000, XP, 2003, IE 6 or above HardwareSuggested Intel-C 2.0G, RAM: 512MB, Graphic card: 64MB Minimum Intel-C 1.6G, RAM: 256MB, Graphic card: 32MB三、产品的安装(一)硬件安装1.连接电源2.连接网线3.架设网络环境。
ZXV10 W908无线控制器用户手册ZXV10 W908用户手册资料版本20090925 R1.0产品版本V1.0策划中兴通讯学院文档开发部编著××（写作者的名字）审核××（写审稿人员的名字）测试××（写测试人员的名字）* * * *中兴通讯股份有限公司地址：深圳市高新技术产业园科技南路中兴通讯大厦邮编：518057技术支持网站：客户支持中心热线：（0755）26770800 800-830-1118传真：（0755）E-mail：* * * *编号：×××××××声明本资料著作权属中兴通讯股份有限公司所有。
未经著作权人书面许可，任何单位或个人不得以任何方式摘录、复制或翻译。
侵权必究。
和是中兴通讯股份有限公司的注册商标。
中兴通讯产品的名称和标志是中兴通讯的专有标志或注册商标。
在本手册中提及的其他产品或公司的名称可能是其各自所有者的商标或商名。
在未经中兴通讯或第三方商标或商名所有者事先书面同意的情况下。
本手册不以任何方式授予阅读者任何使用本手册上出现的任何标记的许可或权利。
本产品符合关于环境保护和人身安全方面的设计要求，产品的存放、使用和弃置应遵照产品手册、相关合同或相关国法律、法规的要求进行。
由于产品和技术的不断更新、完善，本资料中的内容可能与实际产品不完全相符，敬请谅解。
如需查询产品的更新情况，请联系当地办事处。
若需了解最新的资料信息，请访问网站见反馈表为提高中兴通讯用户资料的质量，更好地为您服务，希望您在百忙之中提出您的建议和意见，并请传真至：0，或邮寄至：深圳市高新技术产业园科技南路中兴通讯大厦中兴通讯学院文档开发部收，邮编：518057，邮箱：。
对于有价值的建议和意见，我们将给予奖励。
手册说明本手册是用于工程人员在施工过程中参考使用。
内容介绍主要介绍设备的安装，上电，板卡安装等内容。
龙源期刊网 便携的全能机:三星QX410笔记本电脑测试作者：顾国林来源：《计算机世界》2011年第07期这是一款简洁而全能的产品。
简洁指其外观设计，C面（键盘面）和D面（底部）都为一体式材料成型，非常平顺，加上采用内置锂电池，底部更加简洁。
全能指其功能全、性能好，采用酷睿i5-560M处理器和NVIDIA GeForce GT 420M独立显卡（可自动切换到英特尔整合显卡，获得更好的能效平衡），拥有4GB内存和500GB硬盘空间，并内置光驱，WorldBench 6综合性能测试得分高达112。
过秤显示，这款产品的重量是2.27kg，这意味着，三星QX410是一款性能优异、能玩3D游戏、在同类产品中携带方便的精致笔记本电脑。
从价位看，三星QX410是一款中高定位的产品，材质方面上有体现，采用金属材质的部位包括整个顶盖和键盘一面的上沿，金属材料显示出档次。
三星QX410的屏幕最大张开角度约135°，和大部分产品相似。
屏幕周围是黑框，不过其材质很容易印上难看的指纹。
屏幕下边沿厚达3cm，意味着还有瘦身空间，如果追求更完美的便携性，下一代产品可考虑将体型设计得再窄一些。
14英寸1366×768分辨率的屏幕，明亮而清晰，给人不错的印象。
三星QX410采用流行的巧克力键盘，并在键盘上方设有音量快捷按键。
其触控板面积很大，操控起来很舒服。
重新安装系统后，屏幕亮度快捷键失效，需要安装驱动程序。
三星QX410没有锁定装置来固定合上的屏幕，目前很多消费类产品都没有锁定装置，但我希望在大屏幕、中高端产品上配备，因为长期使用后，屏幕转轴难免会松动，锁定装置可弥补这个不足。
在充满电后，系统预估的电池时间接近6小时，实际使用中，看完一部时长1小时48分钟的高清电影，用了约1/3电量，保守估算，这款产品拥有5小时的电池时间是没有问题的。
XVO大容量语音宽带复用设备介绍
第一，大容量传输。
XVO设备可以支持大量的语音通路并进行高效的宽带复用。
它能够处理多个语音通信同时进行的情况，实现多路语音的同时传输，从而大大提高了通信的效率。
第三，灵活可扩展。
XVO设备具有灵活可扩展的特点，可以根据用户需求进行定制。
它支持多种接口类型，包括模拟语音接口、数字语音接口和IP语音接口等，与不同的通信设备兼容性强。
同时，它还支持多种信号链路的接入和多种传输协议的适配，满足不同场景下的通信需求。
第四，安全可靠性强。
XVO设备具有安全可靠性强的特点，能够保障通信系统的正常运行。
它采用了先进的数据传输和控制技术，能够实现不丢包、不丢音的高质量语音传输。
同时，它还具有多重故障保护功能，当通信链路出现故障时，能够自动切换到备用链路，保证通信的连续性和稳定性。
综上所述，XVO大容量语音宽带复用设备是一种高效、可靠的语音通信设备。
它具有大容量传输、高质量语音传输、灵活可扩展和安全可靠性强等特点，适用于各种语音通信场景。
无论是企业内部通信还是公共通信网络，都可以通过XVO设备实现高效、稳定的语音通信。
全能产品——Sanyo Xacti HD1010
佚名
【期刊名称】《数码》
【年(卷),期】2008(000)007
【摘要】在越来越多的厂商开始推出超小型的DV之时，一直倡导该理念的Sanyo推出了这款XactiHD1010。
关于这个系列的产品我们曾做过介绍，它不但可以拍摄高清画质的视频，还可以拍摄高分辨率静态照片，是一款便携多能产品。
新推出的HD1010采用1／2，5英寸CMOS传感器，可录制1920×1080像素视频．可拍摄800万像素静态照片，以SD／SDHC卡作为存储介质。
【总页数】1页(P29)
【正文语种】中文
【中图分类】TB852.1
【相关文献】
1.Sanyo Xacti VPC-WH1 [J],
2.掌上全高清：Sanyo Xacti VPC-HD2000 [J],
3.Sanyo Xacti VPC—FH1 [J],
4.带着高清去潜水：Sanyo Xacti VPC-CA9 [J],
5.Panasonic接手Sanyo Xacti枪型摄相机产品线，一连推出3款新机 [J],
因版权原因，仅展示原文概要，查看原文内容请购买。
