ALPS电位器RK12L123000E选型手册

滑动电位器旋钮操作型金属轴中空轴本款产品没有推荐产品，需要制作新的定位零件。

注托盘包装规格焊接条件▲P.349/product/alps/ＡＬＰＳ产品选型资料来源：344旋转电位器旋钮操作型329金属轴绝缘轴旋转电位器滑动电位器型9mm size 11mm size 12mm size 14mm size 型号RK09K11RK09D11RK09K12RK09Y11LRK11KRK12L12RK12L115RK14K 单联2联单联2联单联2联照片端子安装方向Vertical / HorizontalHorizontal Vertical / Horizontal Vertical Vertical /Horizontal 轴套无有/无无有有/无使用温度范围－10℃ to ＋ 70℃－40℃ to ＋ 85℃－10℃ to ＋ 70℃操作寿命5,000cycles10,000cycles1,000,000 cycles 15,000cycles 车用产品-----●-生命周期电性能总阻值（kΩ）5, 10, 20, 50, 100, 200105, 10, 20, 50, 100, 2005, 10, 20, 50, 1005, 10, 20, 50, 100, 200电阻规律15A, 1B, 3B, 15C 1B15A, 1B, 3B, 15C15A, 1B, 3B15A, 1B, 3B, 15C总阻值允许差±20％±30％±20％额定功率0.05W 0.03W 0.01W 0.05W最高使用电压50V AC 20V DC50V AC for AC only 50V AC 5V DC50V AC 20V DC50V AC for AC only 50V AC 20V DC50V AC for AC only 相互偏差-－40dB to0dB 3dB max.--音量在ｰ40dB to 0dB 3dB max.音质用 在中心 2dB max.-音量在ｰ40dB to 0dB 3dB max.音质用 在中心 2dB max.绝缘电阻100MΩ min.250V DC 100MΩ min.500V DC 100MΩ min.250V DC 耐电压250V AC for 1minute500V AC for 1minute 300V AC for 1minute 中间输出端子无有/无无无 / 有(音质用)機械的性能定位无, 中央无无, 中央特别定做无, 中央终端止挡强度0.3N ・m -With out bushi n g 0.5N ・mWith bushing 0.6N ・m0.5N ・m 0.6N ・m轴推拉强度50N max.30N max.80N max.耐振性能10 to 55 to10Hz / 分、全振幅1.5mm, X, Y, Z 3方向各2小时轴形状平轴, 齿轴, 螺丝刀型平轴端子形状插入式页330336337341344345● 绝缘轴电位器焊接条件 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・349● 电位器 使用时的注意事项 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・404● 电位器 测量方法·试验方法 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・406● 电位器 电阻规律 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・408注表中的●符号表示适用于系列内的全部产品。

12型绝缘轴铰接型 RK12L系列电阻体数2联安装方向Vertical type操作部形状平轴操作部长度 LM125mm中央定位有总阻值20kΩ电阻规律1B使用温度范围-10℃ to +70℃电性能总阻值允许差±20%额定功率0.05W最高使用电压50V AC for AC only相互偏差在中心2dB以内绝缘电阻100MΩ min. 250V DC耐电压300V AC for 1 minute机械性能全旋转角度300°±5°旋转扭矩 2 to 15mN·m终端止挡强度0.5N·m轴推拉强度80N max.耐振性能10 to 55 to 10Hz/分, 全振幅1.5mm, X.Y.Z 3方向各2小时耐久性能操作寿命15,000 cycles最小订货单位(pcs.)日本800出口1,600外形图安装孔尺寸图自插入侧看端子排列/电路图包装规格托盘包装数(pcs.)1箱/日本8001箱/出口包装1,600出口包装箱尺寸(mm)543×377×250焊接条件浸焊方式的参考举例预热焊接面表面温度100℃ max.加热时间 1 min. max.浸焊焊接温度260℃ max.焊接时间5s max.焊接次数 2 time max.手工焊接方式的参考举例烙铁头温度350℃ max.焊接时间3s max.焊接次数 1 time表示本系列共通的注释。

1. 本产品目录中产品的颜色，与实物的颜色有所差异。

2. 请以最小订购单位的N(整数）倍来订货。

3. 除了产品一览之外，还备有丰富的可适用产品规格。

ALPS电位器测量试验方法电位器是一种用来调节和测量电压的仪器，它有两个或多个连接点，可以通过旋转或滑动来改变电压分配。

在ALPS电位器测量试验中，主要包括电位器测量原理、实验器材和测量步骤。

一、电位器测量原理电位器的测量原理基于电压分压定律，即在电路中，电压与电阻成正比。

电位器通过改变电路中的电阻来改变电压分配，从而实现电压的测量和调节。

二、实验器材1.电源：用来提供电压源的设备。

2.ALPS电位器：实验中使用的电位器，可以是旋转式或滑动式。

3.滑动变阻器：用来改变电阻值，模拟实际应用场景。

4.数字万用表：用来测量电压和电阻的仪器。

5.连接线：用于连接电路元件。

三、测量步骤1.连接电路：将电源、ALPS电位器、滑动变阻器和数字万用表等设备按照电路图连接起来。

注意正确连接正负极。

2.调零：将ALPS电位器旋转到最小值，调整滑动变阻器使得万用表读数为零，以保证测量的准确性。

3.测量电压：以一定的步长旋转ALPS电位器，记录每个步长的电压值，并绘制出电压随电位器角度的变化曲线。

4.分析数据：根据测量结果，可以计算出电位器的电压分配系数和滑动变阻器的电阻值等。

可以通过数据拟合来得到电位器的非线性特性和滑动变阻器的阻值范围。

5.调节电压：根据需求，可以通过旋转或滑动电位器来调节电路中的电压分配。

四、注意事项1.在测量过程中，尽量采用小功率电源，以防止过载或烧坏电路元件。

2.在测量电流的时候，必须按照安全规定进行操作，并且避免短路和高电压情况。

3.在测量过程中，应注意保持电路的稳定性，避免外界因素对测量结果的影响。

4.在连接电路的时候，应注意正确的连接方式和正确的电压极性。

通过以上的测量步骤和注意事项，可以有效进行ALPS电位器的测量试验，获得准确的测量结果并进行电压的调节和控制。

12型绝缘轴铰接型 RK12L系列面向混频器市场电阻体数2联安装方向Vertical type操作部形状平轴操作部长度 LM130mm中央定位无总阻值20kΩ电阻规律15A使用温度范围-10℃ to +70℃电性能总阻值允许差±20%额定功率0.05W最高使用电压50V AC for AC only相互偏差-40dB to 0dB 3dB以内绝缘电阻100MΩ min. 250V DC耐电压300V AC for 1 minute机械性能全旋转角度300°±5°旋转扭矩 2 to 15mN·m终端止挡强度0.5N·m轴推拉强度80N max.耐振性能10 to 55 to 10Hz/分, 全振幅1.5mm, X.Y.Z 3方向各2小时耐久性能操作寿命15,000 cycles最小订货单位(pcs.)日本800出口1,600外形图安装孔尺寸图自插入侧看端子排列/电路图包装规格托盘包装数(pcs.)1箱/日本8001箱/出口包装1,600出口包装箱尺寸(mm)543×377×250焊接条件浸焊方式的参考举例预热焊接面表面温度100℃ max.加热时间 1 min. max.浸焊焊接温度260℃ max.焊接时间5s max.焊接次数 2 time max.手工焊接方式的参考举例烙铁头温度350℃ max.焊接时间3s max.焊接次数 1 time表示本系列共通的注释。

1. 本产品目录中产品的颜色，与实物的颜色有所差异。

2. 请以最小订购单位的N(整数）倍来订货。

3. 除了产品一览之外，还备有丰富的可适用产品规格。

Eaton 121733Eaton Moeller® series PKE12 Motor-protective circuit-breaker,Complete device with standard knob, Electronic, 3 - 12 A, Withoverload releaseGeneral specificationsEaton Moeller® series PKE System-protective circuit-breaker1217334015081195435101 mm102.5 mm45 mm0.42 kgIEC/EN 60947ULCSACSA Class No.: 3211-05IEC/EN 60947-4-1CSA-C22.2 No. 60947-4-1-14 UL 60947-4-1CECSA File No.: 165628VDE 0660UL Category Control No.: NLRV UL File No.: E36332PKE12/XTU-12Product Name Catalog NumberEANProduct Length/Depth Product Height Product Width Product Weight Certifications Model CodeTurn buttonPhase-failure sensitivity (according to IEC/EN 60947-4-1, VDE 0660 Part 102)Standard knobMotor protectionPhase failure sensitiveOverload releaseMotor protection for heavy starting dutyThree-pole 1000 (Class 20) AC-4 cycle operation, Main conducting paths 700 (Class 10) AC-4 cycle operation, Main conducting paths For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods.Note: Going below the minimum current flow time can cause overheating of the load (motor).500 (Class 5) AC-4 cycle operation, Main conducting paths900 (Class 15) AC-4 cycle operation, Main conducting paths≤ 500 ms, main conducting paths, AC-4 cycle operationTerminals: IP00IP2050,000 operations (at 400V, AC-3)50,000 Operations (Main conducting paths)60 Operations/h3 A12 AIII3Motor protective circuit breakerFinger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)6000 V ACActuator type FeaturesFitted with: FunctionsNumber of poles Current flow times - minCut-out periods - minDegree of protectionLifespan, electricalLifespan, mechanicalOperating frequencyOverload release current setting - min Overload release current setting - max Overvoltage categoryPollution degreeProduct categoryProtectionRated impulse withstand voltage (Uimp)Also motors with efficiency class IE3-5 - 40 °C to IEC/EN 60947, VDE 0660 -25 - 55 °C, Operating range 25 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 msMax. 2000 m-25 °C55 °C-25 °C40 °C-40 °C80 °CDamp heat, cyclic, to IEC 60068-2-30Damp heat, constant, to IEC 60068-2-782 x (1 - 6) mm², ferrule to DIN 46228 1 x (1 - 6) mm², ferrule to DIN 462282 x (1 - 6) mm²1 x (1 - 6) mm²14 - 1010 mm 50 Hz 60 Hz 12 A 3 kWSuitable forTemperature compensation Shock resistanceAltitudeAmbient operating temperature - minAmbient operating temperature - maxAmbient operating temperature (enclosed) - minAmbient operating temperature (enclosed) - maxAmbient storage temperature - minAmbient storage temperature - maxClimatic proofingTerminal capacity (flexible with ferrule) Terminal capacity (solid)Terminal capacity (solid/stranded AWG) Stripping length (main cable)Rated frequency - minRated frequency - maxRated operational current (Ie)Rated operational power at AC-3, 220/230 V, 50 Hz Rated operational power at AC-3, 380/400 V, 50 Hz1.7 Nm, Screw terminals, Main cable 1 Nm, Screw terminals, Control circuit cables690 V690 V12 A100 A, Class J, 600 V High Fault, max. Fuse, SCCR (UL/CSA) 100 kA, 600 V High Fault, Fuse, SCCR (UL/CSA)Basic device fixed 15.5 x Iu, Trip Blocks Delayed approx. 60 ms, Trip blocks ± 20% tolerance, Trip blocks Trip block fixed 15.5 x Ir12 A, General use UL/CSA 12 A, AC-3 up to 690 V1 HP3 HP1.5 HP3 HP7.5 HP10 HPScrew terminals3.6 W0 W1.2 WRated operational voltage (Ue) - min Rated operational voltage (Ue) - max Rated uninterrupted current (Iu)Short-circuit current rating (group protection)Short-circuit releaseSwitching capacityAssigned motor power at 115/120 V, 60 Hz, 1-phase Assigned motor power at 200/208 V, 60 Hz, 3-phase Assigned motor power at 230/240 V, 60 Hz, 1-phase Assigned motor power at 230/240 V, 60 Hz, 3-phase Assigned motor power at 460/480 V, 60 Hz, 3-phase Assigned motor power at 575/600 V, 60 Hz, 3-phase Connection Equipment heat dissipation, current-dependent Pvid Heat dissipation capacity Pdiss Heat dissipation per pole, current-dependent Pvid Rated operational current for specified heat dissipation (In)0 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Motor-Protective Circuit-Breaker PKE - brochureMotor Starters in System xStart - brochurePKE – Communication module Modbus RTUProduct Range Catalog Switching and protecting motorseaton-manual-motor-starters-pke65-characteristic-curve-003.eps 1210DIA-57eaton-manual-motor-starters-pke65-characteristic-curve.eps eaton-manual-motor-starters-pke65-characteristic-curve-005.epsDA-DC-00004945.pdfDA-DC-00004950.pdfeaton-manual-motor-starters-dimensions-002.epseaton-manual-motor-starters-mounting-3d-drawing.epseaton-manual-motor-starters-3d-drawing-002.epseaton-general-ie-ready-dilm-contactor-standards.epsETN.PKE12_XTU-12IL034011ZUIL03402019ZIL034003ZUWIN-WIN with push-in technologyVideo Motor Protective Circuit Breaker PKEMN03402004Z_DE_ENDA-CD-pke12_xtuDA-CS-pke12_xtuStatic heat dissipation, non-current-dependent Pvs10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength BrochuresCatalogues Characteristic curveDeclarations of conformity DrawingseCAD modelInstallation instructions Installation videos Manuals and user guides mCAD modelEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaIs the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.9.3 Impulse withstand voltage 10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical function。

电阻体数2联总阻值20kΩ电阻规律15C 焊接方法Manual 型10型操作部种类旋转径: φ14板厚: t0.9颜色: 黑安装板种类插入(2mm)可用于直流不可AC 专用使用温度范围-10℃ to +60℃电性能总阻值允许差±30%额定功率0.03W 最高使用电压50V AC 最大衰减量70dB min.绝缘电阻100MΩ min. 100V DC 耐电压100V AC for 1 minute 机械性能全旋转角度270°±10°旋转扭矩0.5 to 10mN・m 终端止挡强度70mN·m 轴推拉强度5N 耐久性能操作寿命10,000 cycles 最小订货单位(pcs.)日本3,000出口2,400 外形图带旋钮型 RK10J/RK14J系列ｗｗｗ．ｊｅｐｓｕｎ．ｃｏｍ深圳市捷比信实业有限公司安装孔尺寸图自插入侧看端子排列ｗｗｗ．ｊｅｐｓｕｎ．ｃｏｍ深圳市捷比信实业有限公司电路图包装规格散装包装数(pcs.)1箱/日本3,0001箱/出口包装2,400出口包装箱尺寸(mm)371×250×190焊接条件手工焊接方式的参考举例烙铁头温度350℃ max.焊接时间3s max.焊接次数 1 time表示本系列共通的注释。

1. 本产品目录中产品的颜色，与实物的颜色有所差异。

2. 请以最小订购单位的N(整数）倍来订货。

3. 除了产品一览之外，还备有丰富的可适用产品规格。

4. RK14J,可用浸焊需要时请指定「浸焊品」。