(SGS-2011AL)200908

美容仪RoHS检测怎么办理？随着科学技术的发展，美容仪生产技术不断提高，价格降低，美容仪开始进入寻常百姓家。

美容仪RoHS检测可以检测其有害物质含量。

上海世通检测化学实验室拥有CNAS和CMA资质，可以帮您办理美容仪RoHS测试。

RoHS代表有害物质限制，并影响整个电子行业和许多电子产品。

现行的RoHS 测试标准是RoHS2.0，也称为指令2011/65/EU。

RoHS 2.0实际是RoHS指令的修正版，俗称RoHS2.0，其中(Pb 铅，Hg 汞，Cd 镉，Cr6+ 六价铬，PBB 多溴联苯，PBDE 多溴联苯醚，DIBP 领苯二甲酸二异丁酯，DEHP 邻苯二甲酸二(2-乙基己基)酯，BBP 邻苯二甲酸甲苯基丁酯，DBP 领苯二甲酸苯基丁基酯)每一种有害物质的含量不能超过限定数值0.1%;新RoHS为2011/65/EU指令，属于CE认证的一部分，直接进入欧洲产品需要有RoHS2.0认证(CE-RoHS认证)。

美容仪RoHS测试需要提交的资料：1.完整填写申请表及保证书，注明出报告种类(中文或英文)，并提供报告上相应的中英文。

2.成品样品两个，用于核对报告。

3.零部件测试报告和整机测试报告;4.提供产品测试报告一览表。

5.材料清单(BOM)。

6.成品的结构简单剖视图(建议提供，以便核对)。

7、产品说明书或规格性能描述，产品质量控制图(如有)8、整机RoHS符合性声明(DoC)。

美容仪RoHS测试申请流程：1、项目申请——向检测机构监管递检测申请。

2、资料准备——根据检测要求，企业准备好相关的文件。

3、产品测试——企业将待测样品寄到实验室进行测试。

4、编制报告——认证工程师根据合格的检测数据，编写报告。

5、递交审核——工程师将完整的报告进行审核。

6、签发报告——审核无误后，出具报告。

海关总署公告2009年第11号－－关于4项海关化验标准的
公告
【法规类别】海关综合规定
【发文字号】海关总署公告2009年第11号
【发布部门】海关总署
【发布日期】2009.02.19
【实施日期】2009.04.01
【时效性】现行有效
【效力级别】XE0303
海关总署公告
（2009年第11号）
根据《中华人民共和国海关行业标准管理办法（试行）》，海关总署批准《萘含量的测定气相色谱法》、《酒花浸膏中α-酸和β-酸的测定方法液相色谱-串联质谱法》、《聚酯纤维中二氧化钛含量的测定法》和《甲苯二异氰酸酯中同分异构体含量的测定气相色谱法》4项海关化验标准，现予以公布（标准名称见附件，标准文本由中国海关出版社出版），自2009年4月1日起实施。

特此公告。

附件：海关标准编号名称表
二○○九年二月十九日
附件
海关标准编号名称表。

sgs检测报告样本sgs检测报告样本SGS logoSGS 是Societe Generale de Surveillance 的简称，译为“通用公证行”。

其总部在瑞士的日内瓦，中国分支机构叫“通标标准技术服务有限公司”真正的SGS报告含义1、“SGS报告”中的报告，仅仅是test report，即检测报告，所以SGS报告的意思是“SGS出具的检测报告”，不单是指SGS机构出具的RoHS报告(RoHS只是SGS千百种检测中的一种)。

(关于ROHS，RoHS是一个标准，是由欧盟制定的，SGS仅对样品判断是否符合RoHS标准，并按客户需要决定在报告上是否下RoHS结论，即在报告上说明是否符合RoHS标准。

RoHS仅仅是限用物质测试中的一个普遍性的标准，它只检验四种重金属和两种阻燃剂，它不是限用物质测试的全部，也不是测试的全部。

总的来说，概念从大到小是：检测-> 化学检测-> 限用物质检测-> RoHS标准检测)2、“SGS报告”仅对送样提及的检测项目的数据可靠性负责，而不能对产品符合RoHS指令要求负责;3、对送样提及的检测项目的数据而言，、“SGS报告”是永久有效的;(如果客户问所谓有效期，是在商业上的有效概念，这不在SGS控制范围内;客户送检的样品之检测报告是不会随着时间而改变的)4、“SGS报告”(就是RoHS报告)不仅仅是“无铅测试”，RoHS标准的目的在于消除电机电子产品中的铅、汞、镉、六价铬、多溴联苯和多溴联苯醚共6项物质，并重点规定了铅的含量不能超过%;5、“SGS”是SGS 是Societe Generale de Surveillance 的简称，译为“通用公证行”，“SGS报告”也不是RoHS 指令要求测试的唯一机构;还有如：ITS 报告、CQC报告.......6、“SGS报告”不仅仅开展RoHS指令要求的6项，还开展各国法规所列举的“环境有害物质”检测、/zt/jcbg/安全测试及其他(例如REACH等)。

奶粉中双氰胺的检测方法（HPLC-UV 和HPLC-MS/MS 法）北京时间1月25日凌晨消息，新西兰牛奶中发现了有害物质——双氰胺。

双氰胺又名二氰二胺，缩写DICY 或DCD 。

虽然国际标准未对食品中的双氰胺限量，但高剂量的双氰胺对人体是有毒的。

本文采用 Cleanert ® MAS-QuChERS-双氰胺净化管和Venusil ® HILIC 液相色谱柱，建立了奶粉中双氰胺的MAS-QuEChERS 快速前处理方法和LC-UV 以及LC-MS/MS 检测方法。

1 实验部分1.1 仪器、试剂与材料高效液相色谱仪，涡旋振荡器，超声波清洗机，氮吹仪。

双氰胺标准品（CAS ： 461-58-5；FW=84.08），Cleanert ® MAS-QuChERS-双氰胺净化管，Venusil ® HILIC 液相色谱柱，微孔滤膜，乙酸铵、乙酸、乙腈为色谱纯，实验用水为超纯水。

图1双氰胺分子式1.2 实验步骤提取、净化：称取1g 试样于50mL 具塞离心管中，加入2mL 水溶解后，加乙腈定容至10mL ，超声10min ，8000r/min 离心5min ，取2mL 上清液加入Cleanert ® MAS-QuChERS-双氰胺净化管填料，涡旋0.5min ，8000r/min 离心5min ，取上清液过0.22µm 滤膜，待测。

1.3 实验条件1.3.1高效液相色谱法（HPLC 法）：色谱柱：Venusil ® HILIC （5μm ，100Å，4.6*250mm ）； 流动相： 10mmol/L 乙酸铵（pH=4.0）：乙腈=10: 90；波长：220nm ；进样量：10µl ；柱温：30℃；流速：1mL/min 。

1.3.2 LC-MS/MS 法： （1）色谱条件：色谱柱：Venusil ® HILIC （ 5μm ，100Å，2.1*150mm ）；流动相： 0.5mmol/L 乙酸铵（pH=4.0）：乙腈=10:90；进样量：10µL ；柱温：30℃；流速：0.2 mL/min 。

*This SDS for user in China - Not correspond to the regulation of other regions.梯希爱(上海)化成工业发展有限公司修订日期修订日期：： 11/09/2021化学品安全技术说明书修改号码修改号码：： 2修订日期修订日期：： 11/09/2021Page 1 of 42. 危险性概述G H S 分类物理性危害未分类 健康危害皮肤腐蚀/刺激1B 类 严重损伤/刺激眼睛第1级 环境危害未分类 G H S 标签元素图标或危害标志信号词危险 危险描述造成严重的皮肤灼伤和眼损伤 防范说明[预防]请勿吸入粉尘或雾。

作业后彻底洗手和洗脸。

戴防护手套、防护服、面部防护。

[急救措施]如果吞咽：漱口。

请勿催吐。

立刻呼叫中毒控制中心或者医生。

如果皮肤(或头发)沾染：立刻脱掉所有受沾染的衣物。

用水冲洗皮肤或者淋浴。

立刻呼叫中毒控制中心或者医生。

受沾染的衣物清洗后方能再次使用。

如果吸入：将受害者移到新鲜空气处，保持呼吸通畅。

立刻呼叫中毒控制中心或者医生。

如果进入眼睛：用水小心冲洗几分钟。

如果戴有隐形眼镜且可方便取出，取出隐形眼镜。

继续冲洗。

立刻呼叫中毒控制中心或者医生。

[储存]存放处须加锁。

[废弃处置]内容物和容器的废弃处置，请遵守当地、地区和国家的法律法规。

1. 化学品及企业标识产品名称产品名称：：四丁基氢氧化铵 (40%于水中)T C I 产品编码产品编码：：T1685公司:梯希爱(上海)化成工业发展有限公司地址:上海化学工业区普工路96号部门:营业部电话号码:************传真号码:************e-mail:*************************应急电话应急电话：：*************修改号码修改号码：：2梯希爱(上海)化成工业发展有限公司修改号码修改号码：：2修订日期修订日期：：11/09/2021Page 2 of 4 3.成分/组成信息单一物质/混合物混合物化学名(中文名)：四丁基氢氧化铵 (40%于水中)百分比百分比：：....CAS RN：2052-49-5俗名俗名：：TBAOH (40% in Water)分子式分子式：：C16H37NO4.急救措施吸入吸入：：将受害者移到新鲜空气处，保持呼吸通畅，休息。

国家质量监督检验检疫总局关于2011年玩具等3类产品质量国家监督专项抽查情况的通报【法规类别】产品质量监督【发文字号】国质检监函[2011]340号【发布部门】国家质量监督检验检疫总局【发布日期】2011.05.26【实施日期】2011.05.26【时效性】现行有效【效力级别】XE0303国家质量监督检验检疫总局关于2011年玩具等3类产品质量国家监督专项抽查情况的通报(2011年5月26日国质检监函[2011]340号)各省、自治区、直辖市及新疆生产建设兵团质量技术监督局：近期国家质检总局组织对玩具、海水及苦咸水利用膜、机动车辆制动液等3类产品开展了产品质量国家监督专项抽查(以下简称专项抽查)。

现将主要情况通报如下：一、基本情况(一)玩具等3类产品共抽查309家企业生产的338批次产品(不涉及出口产品)，产品抽查批次合格率为93．2％，具体抽查产品和企业名单见公告。

其中，玩具共抽查了212家企业生产的242批次产品，有20家企业生产的20批次产品不合格；海水及苦咸水利用膜共抽查了25家企业生产的25批次产品，有2家企业生产的2批次产品不合格，另有1家企业拒绝接受国家监督抽查，机动车辆制动液共抽查了 71家企业生产的71批次产品，有1家企业生产的1批次产品不合格。

(二)按企业生产规模划分，抽查的大、中、小型企业分别占抽查企业总数的8．1％、10．1％、 81．8％，产品抽样合格率分别为100．0％、96．8％、91．3％。

抽查结果显示大中型企业质量较好，玩具和海水及苦咸水利用膜的大、中型生产企业抽查批次合格率达到100％，小型企业抽查批次合格率较低，影响行业整体质量水平。

(三)扩大覆盖面，突出对集中产区企业的抽查。

机动车辆制动液抽查覆盖了16个省、自治区、直辖市，抽查企业数占全国获证生产企业的67．6％。

玩具抽查突出了塑胶、电动玩具生产企业最集中的广东省，共抽查了172批次产品，占抽查产品总数的62．7％。

（家电企业管理）小家电成
品检验标准
目录
前言
Q/GAL00GL08C019—2009《赠品检验标准要求》是广东格兰仕集团有限公司质量管理标准之一。

本标准在修订时根据体系运行的实际情况并征求了各相关部门的意见，在符合性及可操作性等方面进一步完善。

本标准由广东格兰仕集团有限公司标准化委员会提出。

本标准由广东格兰仕集团有限公司全质办归口。

本标准起草单位：集团全质办。

本标准所述赠品暂分为七大类（后续可再增补）：
●A类：电器类，主要包括电风扇、电饭煲、豆浆机等；
●B类：玻璃陶瓷类，主要包括烹调玻璃碗等；
●C类：塑料件类，主要包括保鲜盒、饭勺、汤勺等；
●D类：刀具类，主要包括厨具六件套、刀具组合等；
●E类：布料类，主要包括床上用品、沙滩椅等；
●F类：金属类，主要包括蒸锅、奶锅、汤锅等。

本标准主要起草人：宋振威、陈永柱、翟谦章、林波、陈天柱、任秋云、曾卫欢、苏永诚等。

本标准是在本公司现行的管理基础上进行编制，自2009年11月25日首次按标准化要求发布。

一次抽样检验方案：。

的产品要符合UL或CSA标准测试指（刚性、有关节）、试验探棒、试验销冲击球、力矩螺刀、力矩扳手、拉/压力计等设备容性(EMC)试验-10%及≤300 +20%+15%或60W（取大）7位逐渐升到测试电压的一半，然后迅速升到规定值1min,观察有无闪络或击穿逐渐降低电压至零0.5(0I类)/3.5(I类)3.5最后受力)至少由2层组成,且任一层可通过SI的耐压测试;RI至层可通过RI的耐压测试.胶带破损度应小于50%.的规范性境温度间隙它金属件之间强度起痕General checking Item1.1 Carton and gift box•Carton and giftbox shall be firmly and up corrugation wave direction. No damaged, no wetted and no dirty.•All marks shall clear and correct.•Check if the item No, model No and pork ……are correct and no missing.1.2 Packing polybag•No damaged, no dirty and shall drying.•Shall have related warning words and punch hole on polybag.Note: No need warning words and punch hole on polybag if the polybag is less than 100x100mm2and open perimeter is less than 380mm.1.3 PackageCheck if the carton and giftbox packed the unit fitly. Too large and too small willreduce the protection for unit.All carton or giftbox shall stand packing and placing along corrugation direction.Otherwise, package will reduce its protection function.General checking Item1.4 Label and manual•The marking shall be clearly legible and durable.Rubbing test for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with petroleum spirit.•To check if there are following marking marked on appliances.--rated voltage (ranges)--rated frequency--rated input--maker’s or responsible vendor’s name, trade mark or identification mark.--maker’s model or type reference.--symbol for class II construction, for class II appliances only.--symbol for degree of protection against ingress of water, other than IPX0.•Generally, appliance shall be with a manual to tell how to use the appliance. It shall be clearly and correct.General checking Item1.5 Power cord•No damaged and all marks shall be clearly legible and durable.•Check if there are related safety approved marks and related license No. Actual record all marks in inspection report.•For UL product:The power cord shall be withstand a pull of 155.68N (35 pounds) for 1 minute without displacement•For EN product:The power cord shall have a cord anchorage and shall be withstand a pull of 30N for mass less than 1 kg, of 60N for mass less than 4kg, for 25 times withdisplacement within 2mmGeneral checking Item1.6 PlugNo damaged and no burr. The pins shall be not loosen.Check if there are related safety approved marks and related license No. Actual record all marks in inspection report.•For UK plug:Level II internal check UK plug. No wire strand protruding from connector. Check the manufacturer marks on plug, such as PMS, MS, scolmore.The fuse holder shall attached to the live pin correctly.Check if it is a counterfeit fuse. Check the manufacturer marks, such as Bussmann ASTA.The weight of genuine fuse is normally between 2.3 –2.4g and with a small central hollow at end cap.General checking Item1.7 Cosmetic check All inspections shall be conducted at a distance of 15 to 20 inches (38 to 50cm)or refer to client ’s specification.Refer to related product W1.8Safety checkRefer to related product WI1.9Function checkRefer to related product WI1.10 Internal check1) Internal wiring--Wireways shall be smooth and free from sharp edges.--Beads and similar ceramic insulators on live wires shall be fixed and cannot change their position.--Sleeving on internal wiring shall be retained in position by positivemeans.--Green/yellow wires shall only be used for earthing conductors.--Stranded conductors shall not be soldering where they are subjected to contact pressure, unless the clamping means is constructed so that there is no risk of bad contact due to cold flow of solder.--Earthing line shall not be solder alone on the dead metal parts of product.General checking ItemFor screwless-type clamping:IEC998-2-2 point 14.102Each conductor is subjected to a pull of the value shown in the following table. The pull is applied without jerks for 1 min in the direction of the axis of the conductor.5040353030Pull force (N) 2.51.51.00.750.5Cross-sectional area mm 2During the test the conductor shall not slip out of the terminal.General checking Item2)Screws and connections--Screws and nuts transmitting contact pressure or which are like ly to be tightened during user maintenance .The screw or nuts are tightened and loosened:-10times for screws in engagement with a thread of insulatingmaterial.-5times for nuts and other screws.--Screw and nuts which make a mechanical connection between different parts of the appliance shall be secured against looseningif they also make electrical connections or provide earthing continuity.Spring washers, lock washers and crown type locks as part of thescrew head are means which may provide satisfactory security.General checking Item1.11Construction--Handles, knobs levers and similar parts shall be fixed in a reliablemanner so that they will not work loose in normal use if looseningcould result in a hazard.Apply an axial force for 1 min-if the shape of these parts is such that an axial pull is unlikely tobe applied in normal use, the force is 15N-if the shape is such that an axial pull is likely to be applied, theforce is 30N.--If handles, knobs and similar parts are used to indicate the position of switches or similar components, it shall not be possible to fixthem in a wrong position if this could result in a hazard.1.12Running testRefer to related product WINote: Some running test are abnormal operation and need to refer to related test procedure in related EN or UL standard.Defects classification* Critical : Defects which could result in hazardous or unsafe conditions for individuals using or maintaining the product as well as defects contravening legal regulations.* Major : Functional defects reducing the usability or solidity of theproduct as well as obvious visual defects reducing the sales value of the product.* Minor : Defects that are unlikely to reduce the use of the product,butnevertheless may influence the sale.For random inspection, the following rules apply:--If the same sample has several defects, only the most serious defect is counted.--Samples with major defects have to be replaced or repaired before re-packing of the shipping cartons opened for inspection.--In the case of critical defects, the entire shipment must be rejected as a matter of principle and clients consulted for a decision.AQL SAMPLING PLAN :BS6001 & ANSI/ASQC Z1.4-1993 AQL single sampling plan for normal inspection is the most widely accepted method of sampling by attributes.4.01.5N/A II FRI MinorMajor Critical Sampling plan Type of service EXPORT CARTON SAMPLING :According to our general method on export carton quantity sampling are apply“Square root of total export carton quantity ”or“Maximum export carton quantity equal to sample size ”General checking Item for Household ApplianceII 1.Export carton / Gift box check, if it is well packed without any torn /extrude /heave found. 2.Accessory contents check, if all accessories are retainand right in place.3.Literature check, ( print quality, spelling error,detailed description to avoid wrong operation,necessary warning information)A) Packaging check Sample sizeDescription contents Check Item SamplesizeDescription contents Check Item II 1.Product identification mark and labels 2.Visual appearance and workmanshipC) Visual appearancecheck II1. Hi-pot test --for European market products: Class I products: 1375Vac 2S, Leakage current <5mA--For North America market products: 1200 Vac 2S,Leakage current < 8 mA2. Earthing continuity test: Resistance < 0.1 Ohm, Current>25A3. Internal check for UK plug ( BS1363)4. Input test (less than 115% of rating power)5. Polarity check for North America products (for switchshould be in live cord)B) Safety testSample sizeDescription contents Check Item S-3S-31111111.Power cord length measurement2.Strain relief test3.Noise check4.Cooling capacity check (if applicable)5.Cooling media check (Weight, leakage , type)6.Internal check (fan type, heat-sink construction, weldering)7.EER check ( if applicable )8.Temperature accuracy check9.Delay restart protection checkF) Special data &measurement II 1. Normal function check according to manual 2. 85% rating voltage running checkE) Functional check II Mechanical check for all assembly parts D) Mechanicalcheck Defects classificationExport carton / Gift Box checkXLoose part, foreign, extra material inside carton XBar code on gift box not compliace with unit.XOld, second hand material used X Length of center security gummed tape less than 2 cm but still secured XSecurity gummed tapes missing or not secured / fully sealed / open end X Color fade on carton / gift box XWrong color on carton / gift box XWrong barcode or serial number (on unit, gift box, carton) X Labels off position / slant or not align XMissing, wrong label or peel off on carton / gift box X Smudge (dirty) printing on carton / gift box but still readable XSmudge (dirty) printing on carton / gift box found not readable X Export carton unimportant marking off position / poor cutting / slant XExport carton important marking wrong, incomplete, off position / poor cutting / slant (Brand name, shipping mark …) X Export carton box wet / damaged / torn but not through inside gift box XExport carton box wet / damaged / torn through inside gift box XWrong type, deformed carton or gift box XAny non-compliance with client ’s sample MinorMajor DescriptionXXX Dimension out of specification according to Client’s drawingsX Cosmetic coating bubble, uneven, strip away X Old / second hand components used XX Other missing or wrong material parts affect safety problemLabeling, text on the labels, gift box and polybag Packing, folding methodDimensions (L x W x H) (cm)(8 -59) x (8 -46) x (5 -40)at first page.Carton weight not exceed 20 kgA density of 450 g/m2Corrugation must be placed in vertical position to ensure the optimal strength.refer to sample as attachment.both in power cord and plugInner carton label and color box label for Korea orderGB=English。

Test ReportNo. CANEC1208348501 Date: 02 Jul 2012 Page 1 of 7测试报告ZHAOQING HAOMING ORGANIC SILICON MATERIAL C O.,LTD 肇庆皓明有机硅材料有限公司LIANTANG I NDUSTRIAL DISTRICT,LIANHUA TOWN,DINGHU DISTRICT,ZHAOQING CITY,GUANGDONG PROVINCE CHINA中国 广东 肇庆市 肇庆鼎湖莲花镇莲塘工业区The following sample(s) w as/were s ubmitted and identified on behalf o f the clients as : SILICONE INDUSTRIAL SEALANT以下测试之样品是由申请者所提供及确认：电子阻燃密封胶SGS Job N o. : CP12-010448 - GZ SGS 工作编号Tested S ample Info. : HMG-628测试样板信息 Client R ef. Info. :HMG-628, HM-40, HMG-628B, HMG-628C, HMG-628E, HMG-628X, HMG-636, HM-656, HM-40D, HM-240, HM-2577, HMG-301, HMG-301T, HM-399, HM-618, HM-623, HM-624, HM-626, HM-627, HM-629, HM-631, HM-642, HM-645, HM-648, HM-662, HM-665, HM-668, HM-822, HM-825, HM-818, HM-828, HM-828T, HM-832, HM-835, HM-838, HM-704, HM-705, HM-706Date of Sample Received : 26 Jun 2012样板接收时间 Testing Period : 26 Jun 2012 - 02 Jul 2012测试周期Test Requested : Selected t est(s) a s requested by client.测试要求 Test Method : 测试方法 Test Results : 测试结果 Conclusion :根据客户要求测试Please refer to next p age(s). 请参看下一页Please refer to next p age(s).请参见下一页A:Based o n the performed tests o n submitted samples, the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) comply with t he limits as set by RoHS Directive 2011/65/EU Annex I I; recasting 2002/95/EC. 根据客户提供的样品测试其铅，汞，镉，六价铬，多溴联苯PBB 和多溴二苯醚的测试结果符合ROHS 指令（2011/65/EU ）和（2002/95/EC ）修定指令的要求Signed f or and on behalf o f 签名 SGS-CSTC Ltd.客户产品信息结论Test ReportNo. CANEC1208348501 Date: 02 Jul 2012 Page 2 of 7Test Results :测试结果Test Part Description : 测试部件描述Specimen N o. 样品数量SGS Sample ID SGS 样品ID 号Description 描述 1CAN12-083485.001Black p aste黑色膏状Remarks : 备注(1) 1 mg/kg = 1 ppm = 0.0001% (2)MDL = Method D etection Limit (3) ND = Not Detected ( < MDL ) (4) "-" = Not RegulatedA:RoHS Directive 2011/65/EU ROHS 指令（2011/65/EU ）Test Method : With reference to IEC 62321:2008 使用IEC 62321:2008标准(1) Determination of Cadmium by ICP-OES.镉测试使用ICP-OES(2) Determination of Lead by ICP-OES.铅测试使用ICP-OES(3) Determination of Mercury by ICP-OES. 汞测试使用ICP-OES(4) Determination of Hexavalent Chromium by Colorimetric Method u sing UV-Vis. 六价铬测试使用UV-VIS(5) Determination of PBBs / PBDEs content by GC-MS. PBBs / PBDEs 测试使用GC-MSTest Item(s) 测试项目 Limit 限值 Unit MDL 001Cadmium (Cd) 镉 100 mg/kg 2 ND Lead (Pb) 铅 1000 mg/kg 2 ND Mercury (Hg) 汞1000 mg/kg 2 ND Hexavalent Chromium (CrVI) 六价铬 1000 mg/kg 2 ND Sum of PBBs 多溴联苯测试之和值 1000 mg/kg - ND Monobromobiphenyl 单溴联苯 - mg/kg 5 ND Dibromobiphenyl 二溴联苯 - mg/kg 5 ND Tribromobiphenyl 三溴联苯-mg/kg5ND方法检测限 未检出 (< MDL)测试方法Tetrabromobiphenyl四溴联苯-mg/kg5ND Pentabromobiphenyl五溴联苯-mg/kg5ND Hexabromobiphenyl六溴联苯-mg/kg5ND Heptabromobiphenyl七溴联苯-mg/kg5ND Octabromobiphenyl八溴联苯-mg/kg5ND Nonabromobiphenyl九溴联苯-mg/kg5ND Decabromobiphenyl十溴联苯-mg/kg5ND Sum of PBDEs多溴二苯醚测试之和1000mg/kg-ND Monobromodiphenyl ether单溴二苯醚-mg/kg5NDTest Report No.CANEC1208348501Date:02Jul2012Page3of7Test Item(s)Limit Unit MDL001Dibromodiphenyl ether 二溴二苯醚-mg/kg5NDTribromodiphenyl ether 三溴二苯醚-mg/kg5NDTetrabromodiphenyl ether四溴二苯醚-mg/kg5NDPentabromodiphenyl ether 五溴二苯醚-mg/kg5NDHexabromodiphenyl ether 六溴二苯醚-mg/kg5NDHeptabromodiphenyl ether 七溴二苯醚-mg/kg5NDOctabromodiphenyl ether 八溴二苯醚-mg/kg5NDNonabromodiphenyl ether 九溴二苯醚-mg/kg5NDDecabromodiphenyl ether 十溴二苯醚-mg/kg5NDNotes:注释(1)The maximum permissible limit is quoted from d irective2011/65/EU,Annex I I最大限值引用指令2011/65/EU,Annex I IB:Hexabromocyclododecane (HBCDD) 六溴环十二烷（HBCDD）Test Method:Determination of HBCDD by GC-MS based on IEC62321:2008.测试方法：测试HBCDD使用GC-MS基于IEC 62321:2008的标准Test Item(s) 测试项目 Limit Unit MDL 001Hexabromocyclododecane (HBCDD) -不可有 mg/kg 10 NDNotes:注释(1) Reference I nformation:Directive2011/65/EU recasting RoHS directive2002/95/EC:参考方法：ROHS指令（2011/65/EU）和（2002/95/EC）修定指令的要求(2) Hexabromocyclododecane(HBCDD)is considered as a priority for risk e valuation and substancerestriction.六溴环十二烷（HBCDD）被认为是一个优先进行风险评估和物质限制C:Phthalate邻苯二甲酸盐(或邻苯二甲酯)Test Method:Determination of phthalates by GC-MS based on EN14372:2004.测试方法：测试使用GC-MC 基于EN14372:2004标准Test Item(s)测试项目单位 Unit MDL001Dibutyl Phthalate(DBP)%(w/w)0.003NDBenzylbutyl Phthalate(BBP)%(w/w)0.003NDBis-(2-ethylhexyl)Phthalate(DEHP)%(w/w)0.003NDNotes 注释(1)Reference I nformation:Directive2011/65/EU recasting RoHS directive2002/95/EC:参考方法：ROHS指令（2011/65/EU）和（2002/95/EC）修定指令的要求Bis(2-ethylhexyl)phthalate(DEHP),Butyl benzyl p hthalate(BBP)and Dibutyl phthalate(DBP)areconsidered as a priority for risk e valuation and substance restriction.DEHP,BBP,DBP,被认为是一个优先进行风险评估和物质限制Remark:T he result(s)shown is/are o f the total w eight of wet sample.备注：结果显示是湿样的总重量Test Report No.CANEC1208348501Date:02Jul2012Page4of7 ATTACHMENTS附件RoHS Testing Flow Chart1)Name of the person who made testing:Bella Wang/Cutey Yu 测试人员名字2)Name of the person in charge of testing:Adams Yu/Ryan Yang 审核人员名字3)These samples were dissolved totally by pre-conditioning method according to below flow chart6+Sample PreparationSample MeasurementPb/Cd/Hg PBBs/PBDEs Cr6+Acid digestion withmicrowave/hotplateF i ltration Solution R e s i d ueSample solventextractionConcentration/Dilution of extractionsolutionNo n m eta ll icmateri a lAdding d i gest i onreag e n tHeating toPositiveMetallicmaterialSpot testNegativeF i ltration90~95℃forextractionBoiling waterextracti on1)Alkali Fusion/Dry A s h i ng2)Acid todissolveICP-OES/AA SD A T A GC-MSDATAFiltration a ndpH a d j ustmentAdding 1,5-diphenylcarbazidefor colordevelopmentUV-V i sAdding 1,5-diphenylcarbazidefor colordevelopmentA red colorindicates thepresence of Cr6+.If n ecessary,confirm withUV-V i s.D A T A DATATest Report No.CANEC1208348501Date:02Jul2012Page5of7ATTACHMENTS附件HBCDD Testing Flow C hartHBCDD测试流程1)Name of the person who made testing:Cutey Yu 测试人员2)Name of the person in charge of testing:Ryan Yang 测试负责人Sample cutting/preparation 样品切开和预处理Sample Measurement 样品测量Solvent extraction 溶解萃取Concentration/Dilution 浓缩和稀释F i ltration 过滤GC-MS 气相色谱-质谱联用分析D A T A 数据结果Test Report No.CANEC1208348501Date:02Jul2012Page6of7 ATTACHMENTS附件Phthalates Testing Flow Chart邻苯二甲酸盐的测试流程图1)Name of the person who made testing:T i na Zhao 测试人员2)Name of the person in charge of testing:Ryan Yang 审核人员Sample cutting/preparation 样板预处理Sample Measurement 样板测量Solvent extraction 溶解萃取Concentration/Dilution浓缩和稀释F i ltration过滤GC-MS 气相色谱-质谱联用分析仪D A T A 测试结果数据Test Report No.CANEC1208348501Date:02Jul2012Page7of7 Sample photo:样品图片CANEC1208348501CAN12-083485.001SGS authenticate the photo o n original report only***End of Report***。

工商局手表专项检查内容
此次智能儿童手表商品检验主要依据GB/T 22450.1-2008《900/1800MHz TDMA数字蜂窝移动通信系统电磁兼容性限值和测量方法第1部分：移动台及其辅助设备》、GB/T 19484.1-2013《800MHz/2GHz cdma2000 数字蜂窝移动通信系统的电磁兼容性要求和测量方法第1部分：用户设备及其辅助设备》、GB4943.1-2011《信息技术设备安全第1部分：通用要求》、GB31241-2014《便携式电子产品用锂离子电池和电池组安全要求》，检验项目主要包括标志和说明、电击和能量危险的防护、电气间隙、爬电距离和绝缘穿透距离、结构设计（直插式设备）、接触电流和保护导体电流、抗电强度、防火防护外壳的材料、标识和警示说明、外部短路、应力消除、辐射杂散、静电放电。

此次检验中不合格项目主要包括辐射杂散，电气间隙、爬电距离，防火防护外壳的材料，标识和警告说明。

根据此次商品质量抽检情况，工商部门向选购智能儿童手表的消费者发布以下消费提示：
一是查看认证。

具有通讯功能的儿童智能手表，其定位手表与手机类似，体积虽小，确保产品质量却很重要。

要注意选择品牌，并查阅是否有正规检测机构出具的合格检测报告，是否具有工信部颁发的电信设备进网许可，以及CCC认证、无线电发射设备型号核准等权威机构认证。

二是正确使用。

勿将手表浸泡在水中，远离火源、高温高热等极端环境，还要提醒儿童不要误食、摔打手表。

应避免接触重物或尖锐金属部件，防止内部电池被重物压变形或被尖锐金属刺穿，导致内部电池短路。

严禁使用其他充电器给智能儿童手表充电，充电时若手表发烫应立即停止充电。

若显示已充电完毕应及时取下，防止过度充电。

人工汗液(碱性,ATTS标准)说明书
本产品仅供体外研究使用，不得用于临床诊断
产品简介：
适用于文玩、首饰、电脑、手机等各行业的耐汗牢度和耐腐蚀性的模拟实验,用于检测人体接触物的使用寿命。

又称人工汗液模拟液、人工汗水、人工汗、人体汗液、人工合成汗水、人工合成汗液、人工模拟汗液、人工耐汗测试试剂等人工汗液与真实的人体汗液相似度大于99.5%,pH值4.7较常用,亦可根据客户需求定制：2.6、4.0、4.5、4.7、5.0、5.5、8.0、8.58.7.8.8。

符合以下标准：ISO 3160-2,ISO 105-E04,ISO 12870,EN 1811：2011,EN6128:2011等。

仅用于科研，不能用于临床诊断！所有产品仅供科研使用，不得用于人或动物的治疗等任何其他用途，不为任何个人提供产品和服务。

Test ReportNo. 2191680/JL Date : Nov 15 2010 Page 1 of 6This d ocument is issued by the Company subject to its General Cond itions of Service printed overleaf, available on request or accessible at /terms_and _cond itions.htm and , for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction d ocuments. This d ocument cannot be reprod uced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content orThis report supersedes all previous documents bearing the test report number 2190370/JL.The following sample was submitted and identified on behalf of the client as ECOTANKA STAINLESS STEEL DRINK BOTTLE.SGS Job No. : 3654867 Style / Item No. : ORIGINAL TANKA RANGE Country of Origin : CHINA Country of Destination : GLOBAL Sample Receiving Date : NOV 02 2010 Testing Period : NOV 02 – 08 2010Test Requested : Please refer to the result summary. Test Method & Results : Please refer to next page(s). Result Summary :Test RequestedConclusion 1. US FDA 21 CFR 177.1520 (Olefin Polymers)-- Polypropylenehomopolymer --a) Density PASSb) Melting point PASSc) Extractable fraction PASSd ) Soluble fraction PASS 2. US FDA 21 CFR 175.300 – Determination ofAmount of ExtractivesPASS 3. US FDA 21 CFR 177.1210 (Closure with SealingGaskets) – Determination of Amount of Net Chloroform Soluble ExtractivesPASS 4. US FDA 21 CFR 177.2600 (Rubber Articles) –Determination of Amount of ExtractivesPASS 5. US FDA General Recognized As Safe (GRAS)Specifications –Total Chromium content in stainless steelPASSSigned for and on behalf of SGS Hong Kong Ltd.Chan Yu Yan, Cyrus Section ManagerTest ReportNo. 2191680/JL Date : Nov 15 2010 Page 2 of 6This d ocument is issued by the Company subject to its General Cond itions of Service printed overleaf, available on request or accessible at /terms_and _cond itions.htm and , for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction d ocuments. This d ocument cannot be reprod uced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content orTest Results :1) US FDA 21 CFR 177.1520 (Olefin Polymers)Polypropylene homopolymera) DensityMethod : With reference to 21 CFR 177.1520 (c)(1.1a), determined at 23ºC.Result (g/mL)Test Item1 Permissible Limit (g/mL)Density at 23ºC0.8830.880 – 0.913Comment PASS --Sample Description : 1. Black Plastic (Lid)Note : g/mL = gram per milliliterb) Melting pointMethod : With reference to 21 CFR 177.1520 (c)(1.1b).Result (ºC)Test Item1 Permissible Limit (ºC)Melting Point 160 – 161 160 – 180Comment PASS --Sample Description : 1. Black Plastic (Lid)Note : °C = degree CelsiusTest ReportNo. 2191680/JL Date : Nov 15 2010 Page 3 of 6This d ocument is issued by the Company subject to its General Cond itions of Service printed overleaf, available on request or accessible at /terms_and _cond itions.htm and , for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction d ocuments. This d ocument cannot be reprod uced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content orTest Results (Cont’d) :c) Extractable fractionMethod : With reference to 21 CFR 177.1520 (c)(1.1a). Sample preparation in n-hexane at refluxtemperature for 2 hours.Result (% w/w) Test Item1Detection Limit (% w/w) Permissible Limit(% w/w) Extractable fraction 1.6 0.1 6.4 Comment PASS -- --Sample Description : 1. Black Plastic (Lid)Note : % w/w = percentage of weight by weightd) Soluble fractionMethod : With reference to 21 CFR 177.1520 (c)(1.1a). Sample preparation in xylene at 25oC for 2 hours.Result (% w/w) Test Item1Detection Limit (% w/w) Permissible Limit(% w/w) Soluble fraction 3.3 0.1 9.8 Comment PASS -- --Sample Description : 1. Black Plastic (Lid)Note : 1. % w/w = percentage of weight by weight 2. °C = degree CelsiusTest ReportNo. 2191680/JL Date : Nov 15 2010 Page 4 of 6This d ocument is issued by the Company subject to its General Cond itions of Service printed overleaf, available on request or accessible at /terms_and _cond itions.htm and , for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction d ocuments. This d ocument cannot be reprod uced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content orTest Results (Cont’d) :2) US FDA 21 CFR 175.300 – Determination of Amount of ExtractivesMethod : With reference to US FDA 21 CFR 175.300.For repeated use :Result (mg/inch 2) Extractants Test Con d ition 1DetectionLimit (mg/inch 2) Permissible Limit (mg/inch 2) Distilled Water 120oF for 24 hours ND 1.0 188% Alcohol 120oF for 24 hours ND 1.0 18n-Heptane 70oF for 30 minutes ND 1.0 18 Comment -- PASS -- --Sample Description : 1. Silvery Metal (Bottle)Note : 1. mg/inch 2= milligram per square inch2. ºF = degrees Fahrenheit3. ND = Not Detected3) US FDA 21 CFR 177.1210 (Closure with Sealing Gaskets) – Determination of Amount of NetChloroform Soluble ExtractivesMethod : With reference to US FDA 21 CFR 177.1210.For preformed overall discs or annular rings from vulcanized plasticized polymers including rubber :Result (ppm) Extractants Test Con d ition1DetectionLimit (ppm) Permissible Limit(ppm)Distilled Water 120oF for 24 hours ND 5 508% Alcohol 120oF for 24 hours ND 5 50n-Heptane 70oF for 30 minutes ND 5 50 Comment -- PASS -- --Sample Description :1. Translucent Silicone Rubber (Ring)Note : 1. ppm= parts per million2. ºF = degrees Fahrenheit3. ND = Not DetectedTest ReportNo. 2191680/JL Date : Nov 15 2010 Page 5 of 6This d ocument is issued by the Company subject to its General Cond itions of Service printed overleaf, available on request or accessible at /terms_and _cond itions.htm and , for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction d ocuments. This d ocument cannot be reprod uced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content orTest Results (Cont’d) :4) US FDA 21 CFR 177.2600 (Rubber Articles) – Determination of Amount of ExtractivesMethod : With reference to US FDA 21 CFR 177.2600.For use in contact with aqueous foods :Result (mg/inch 2) Extractants Test Con d ition 1DetectionLimit (mg/inch 2) Permissible Limit (mg/inch 2) Reflux temperature for 7 hours 0.6 0.1 20Distilled WaterSucceeding 2 hours of extraction 0.3 0.1 1Comment -- PASS -- --Sample Description :1. Black Rubber (Mouth Piece)Note : mg/inch 2= milligram per square inch5) US FDA General Recognized As Safe (GRAS) Specifications –Total Chromium content in stainless steelMethod : Acid d igestion followed by analysis with Ind uctively Coupled Argon Plasma – Atomic EmissionSpectrometry.Result (%) Test Item1DetectionLimit (%) Requirement Chromium (Cr) 18.0 0.005 Not less than 16% Comment PASS -- --Sample Description : 1. Silvery Metal (Bottle)Note : % = Percentage by weightTest ReportNo. 2191680/JL Date : Nov 15 2010 Page 6 of 6This d ocument is issued by the Company subject to its General Cond itions of Service printed overleaf, available on request or accessible at /terms_and _cond itions.htm and , for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction d ocuments. This d ocument cannot be reprod uced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or*** End of Report ***。

Product inspecting standard -- The first part for all products（PIS0001:2009第一版本）2009-XX-XX发布2009-XX-XX实施前言第一章 GS产品的安全检测—通用部分目次1 范围 (4)2 规范性引用文件 (4)3 定义 (4)4 试验的一般条件 (5)5 标志和说明 (6)6 对触及带电部件的防护 (6)7 输入功率和电流 (6)8 正常温升试验 (6)9 工作温度下的泄漏电流和电器强度 (7)10 耐潮湿 (7)11 泄漏电流和电气强度 (7)12 变压器和相关电路的过载保护 (7)13 非正常工作 (7)14 稳定性和机械危险 (8)15 机械强度 (8)16 结构内部布线 (8)17 电源连接和外部软线 (8)18 外部导线用接线端子 (9)19 接地措施 (9)20 螺钉和连接 (9)21 爬电距离、电气间隙和固体绝缘 (10)22 耐热和耐燃 (11)第一章 GS产品的安全检测—通用部分1 范围本章适用于我司所有GS产品，其额定电压不超过交流250V 。

如本章与相关的国家和国际标准发生冲突时，应以相关的国家和国际标准为准。

2 规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。

凡是注有日期的引用文件有更新时，此标准也应跟着更新；凡是没有标注日期的引用文件,其最新版本适用于本标准。

GB 4706.1 家用和类似用途电器的安全第一部分通用要求；IEC 60335-1家用和类似用途电器的安全第一部分通用要求3 定义本章采用下列定义:3.1在使用电压和电流一词的地方，除非另有规定，否则都是指有效值（r.m.s）。

3.1.1额定电压 rated voltage由制造厂为器具规定的电压。

在产品的名牌上标识。

注：对于三相电源，它是相间电压。

3.1.2额定电压的范围 rated voltage range是由制造厂为器具规定的电压范围，用其上、下限表示。