DTA123JKAT146中文资料

Motor control and protectionICON familyStart easily Protect preciselyIntroducing Eaton’s new contactor range for AC-3 applications to 170A. Perfectly suited for applications in the commercial and industrial segments for panel builders and machinery OEMs.The contactor has a smaller footprint than the existing xStart series and offers application adjusted ratings.Icon Contactors SeriesCoil voltages available are 24V50/60HZ, 110V50/60HZ, 230V50/60HZ, 400V50/60HZ, DC24V .Basic devices Rated operational current Max. motor rating for three-phase motors 50 - 60 Hz Conventional thermal current I th = I e AC-1at 40°C A Open Contact AC-3AC-3AC-4380 V 400 V I e220 V 230 V P 380 V 400 V P 660 V 690 V P 220 V 230 V P 380 V 400 V P 660 V 690 V P N/O = Normallyopened contact N/C = Normally 4 pole, 3 poleConnection type: Screw terminals9 2.5 4 4.5 1.5 2.5 3.6 20 – 1 N/C 12 3.5 5.5 6.5 2 3 4.4 20 1 N/O –12 3.5 5.5 6.5 2 3 4.4 20 – 1 N/C 15 4 7.5 7 2 3 4.4 20 1 N/O –154 7.5 7 2 3 4.4 20 – 1 N/C 3 poleConnection type: Screw terminals1857.511 2.5 4.56.5 401 N/O–18 5 7.511 2.5 4.5 6.5 40 – 1 N/C 257.51114 3.5 68.5 401 N/O–25 7.5 1114 3.5 6 8.5 40 – 1 N/C 32101515 4 710 451 N/O–32 10 1515 4 710 45 – 1 N/C 381118.515 4 710 451 N/O–3811 18.5 15 4 710 45 – 1 N/C 3 poleConnection type: Screw terminals40 12.5 18.523 5 912 60 1 N/O 1 N/C 50 15.5 2230 6 1014 80 1 N/O 1 N/C 65 20 3035 7 1217 98 1 N/O 1 N/C 7222 3735 7 1217 98 1 N/O 1 N/C 3 poleConnection type: Screw terminals80 25 3737112015110 1 N/O 1 N/C 95304545 1120151301 N/O1 N/C3 poleConnection type: Screw terminals115 37 5590 17 2843 160 ––150 48 75 96 20 3348 190 ––1705290140 20 3348 203––CMN00027DILM9-01N CMN00038DILM12-10N CMN00049DILM12-01N CMN00060DILM15-10N CMN00071DILM15-01N CMN00082DILM18-10N DILM18-01N CMN00104DILM25-10N DILM25-01N(CMN00126DILM32-10N DILM32-01N CMN00148DILM38-10N DILM38-01N CMN00170DILM40-11N DILM50-11N DILM65-11N DILM72-11N DILM80-11N DILM95-11N DILM115N DILM150N DILM170N (...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)(...)• Phase failure sensitivity and temperature compensation • Reset pushbutton manual/auto • Test/off pushbutton• Auxiliary contact (1 N/O + 1 NC)•Fitted directly on the contactor of the maximum current to 175AIcon Overload relays ZB..N series0.1 – 0.16CMN00333CMN00335ZB12N-1,6CMN00336ZB12N-2,4CMN00337ZB12N-4CMN00338ZB12N-6CMN00339ZB12N-10CMN00340ZB12N-12CMN00341ZB12N-161 – 1.5CMN00352ZB32N-24CMN00353ZB32N-30CMN00354ZB32N-36CMN00355ZB32N-38CMN00356Setting range of overload releasesCircuit symbolAuxiliary contactFor use withI r AN/O = normally open contact N/C = normally closed contact0.4 – 0.6 1 N/O 1 N/C 0.6 – 1 1 N/O 1 N/C 1 – 1.6 1 N/O 1 N/C 1.6 – 2.4 1 N/O 1 N/C 2.4 – 4 1 N/O 1 N/C 4 – 6 1 N/O 1 N/C 6 – 10 1 N/O 1 N/C 9 – 12 1 N/O 1 N/C 12 –161 N/O1 N/C 17 – 24 1 N/O 1 N/C 22 – 30 1 N/O 1 N/C 29 – 36 1 N/O 1 N/C 33 – 381 N/O1 N/COverload relaysIcon Overloads ZB…N seriesSetting range of overload releasesCircuit symbolAuxiliary contactFor use withI r AN/O = normally open contact N/C = normally closed contact63 – 80 1 N/O 1 N/C 77 – 971 N/O1 N/C50 – 70 1 N/O 1 N/C 70 – 100 1 N/O 1 N/C 95 – 125 1 N/O 1 N/C 120 – 150 1 N/O 1 N/C 145 – 1751 N/O1 N/COverload relays Part no.Article no.– 25CMN00363– 50– 35– 25 – 50ZB95N-50 – 35ZB150N-35Icon Contactor Relays DILA…N seriesWiring method: Screw terminals Basic devices with interlocked opposing contacts ContactRated operational current AC – 15Conventional thermal current at 55°CN/O = Normally opened contact N/C = Normally closed contact220 V 230 V 240 V I e A380 V 400 V 415 V I e AI th A4 N/O – 4 416 3 N/O 1 N/C 4 4 16 2 N/O 2 N/C 4 4 16 1 N/O 3 N/C 4416–4 N/C4416DILA-40N DILA-31N DILA-22N DILA-13N DILA-04N(Coil voltages available are 24V50/60HZ, 110V50/60HZ, 230V50/60HZ, 400V50/60HZ, DC24V .• Varied 4-pole contact configurations • Conventional thermal current (Ith): 16A• Identical construction sizes for AC- and DC-operated contactor relays •Integrated surge suppressors for DC-operated contactor relaysA complete range of accessories are available for the Icon series, such as:• Auxiliary contacts (top mount)• Auxiliary contacts (side mount)• RC Suppressors• Varistor Suppressors• Pneumatic timer modules • Mechanical Interlocks • Sealable Shrouds•External Reset Button(...)(...)(...)(...)(...)E a t o n10 Kent RoadMascot NSW 2020Tel: 1300 332 866Fax: (02) 9693 1258Email: ************************ Eaton is a registered trademarkof Eaton Corporation.All trademarks are property of their respective owners.For more information about Eaton visit: Eaton’s mission is to improve the quality of life and the environment through the use of power management technologies and services. We provide sustainable solutions that help our customers effectively manage electrical, hydraulic, and mechanical power – more safely, more effi ciently, and more reliably. Eaton’s 2019 revenues were $21.4 billion, and we sell products to customers in more than 175 countries. We have approximately 95,000 employees.For more information about Eaton visit: 。

UNISONIC TECHNOLOGIES CO., LTDDTA123E PNP EPITAXIAL SILICON TRANSISTORDIGITAL TRANSISTORS(BUILT- IN BIAS RESISTORS)FEATURES* Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input.EQUIVALENT CIRCUITOUTGNDOUTININ*Pb-free plating product number:DTA123ELORDERING INFORMATIONOrder NumberPin AssignmentNormal Lead Free Plating Package 1 2 3 PackingDTA123E-AE3-6-R DTA123EL-AE3-6-R SOT-23 G I O TapeReel DTA123E-AL3-6-R DTA123EL-AL3-6-R SOT-323 G I O Tape Reel DTA123E-AN3-6-R DTA123EL-AN3-6-R SOT-523 G I O Tape ReelMARKINGABSOLUTE MAXIMUM RATINGS (Ta=25°C)PARAMETER SYMBOL RATINGS UNITSupply Voltage V CC -50 V Input Voltage V IN -12 ~ +10 V Output Current I OUT -100 mASOT-523 150 mWPower Dissipation SOT-23/SOT-323P D200 mWJunction Temperature T J +150 °C Storage Temperature T STG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL SPECIFICATIONS (Ta=25°C)PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITV IN(OFF) V CC =-5V, I OUT =-100µA -0.5Input Voltage V IN(ON) V OUT =-0.3V, I OUT =-20mA -3VOutput Voltage V OUT(ON) I OUT /I IN =10mA/-0.5mA -0.1 -0.3V Input Current I IN V IN =-5V -3.8mA Output Current I OUT(OFF) V CC =-50V, V IN =0V -0.5µA DC Current Gain G IN V OUT =-5V, I OUT =-20mA 20Input Resistance R 1 1.54 2.2 2.86K ΩResistance Ratio R 2/R 1 0.8 1 1.2 Transition Frequency f T V CE =-10V, I E =−5mA, f=100MHz * 250 MHz * Transition frequency of the deviceTYPICAL CHARACTERISTIC521Output Current, I OUT (A)Input Voltage vs. Output Current(ON Characteristics)I n p u t V o l t a g e , V I N (O N ) (V )Input Voltage , VI(OFF) (V)Output Current vs. Input Voltage(OFF Characteristics)1K 500-200μ-1mOutput Current, I OUT (A)200100502010521D C C u r r e n t G a i n , G IDC Current Gain vs. Output Current1500m Output Current, I OUT (A)200m100m 50m 20m 10m 5m 2m 1mO u t p u t V o l t a g e , V O U T (O N ) (V )Output Voltage vs. Output Current-100μ-200μ-1m-2m -5m -10m -20m -100m-500μ-50m。

PNP PRE-BIASED SMALL SIGNAL SOT23 SURFACE MOUNT TRANSISTORFeatures• Epitaxial Planar Die Construction• Complementary NPN Types Available (DDTC) • Built-In Biasing Resistors, R1 = R2• “Lead Free”, RoHS Compliant (Note 1)• Halogen and Antimony Free "Green" Device (Note 2) • Qualified to AEC-Q101 Standards for High ReliabilityMechanical Data• Case: SOT23 • Case material: Molded Plastic. “Green” Molding Compound. • Classification Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020 • Terminals: Matte Tin Finish • Weight: 0.008 grams (approximate)Part Number R1, R2 (NOM)DDTA123ECA 2.2K Ω DDTA143ECA 4.7K Ω DDTA114ECA 10K Ω DDTA124ECA 22K Ω DDTA144ECA 47K Ω DDTA115ECA 100K ΩOrdering Information (Note 3 & 4)Product Grade Marking Reel size (inches) Tape width (mm)Quantity per reelDDTA123ECA-7-F Commercial P04 7 8 3,000 DDTA143ECA-7-F Commercial P08 7 8 3,000 DDTA114ECA-7-F Commercial P13 7 8 3,000 DDTA114ECAQ-7-F Automotive P13 7 8 3,000 DDTA114ECAQ-13-F Automotive P13 13 8 10,000 DDTA124ECA-7-F Commercial P17 7 8 3,000 DDTA144ECA-7-F Commercial P20 7 8 3,000 DDTA115ECA-7-F Commercial P24 783,000Notes: 1. No purposefully added lead.2. Diodes Inc's "Green" policy can be found on our website at .3. For packaging details, go to our website at .4. Products with Q-suffix are automotive grade. Automotive products are electrical and thermal the same as the commercial, except where specified.Marking InformationDate Code KeyYear 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017Code N P R S T U V W X Y Z A B C D EMonth Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov DecCode 1 2 3 4 5 6 7 8 9 O N DDevice Schematic Top View SOT23XXX = Product Type Marking Code, See Ordering Information YM = Date Code Marking Y = Year (ex: X = 2010) M = Month (ex: 9 = September) 132GND (0)C BIN OUTEEquivalent Inverter CircuitINGND(+)XXX Y MMaximum Ratings @T A = 25°C unless otherwise specifiedCharacteristic SymbolValue UnitSupply Voltage <Pin: (3) to (2)> V CC50 VInput Voltage <Pin: (1) to (2)> DDTA123ECADDTA143ECADDTA114ECADDTA124ECADDTA144ECADDTA115ECAV IN+10 to –12+10 to –30+10 to –40+10 to –40+10 to –40+10 to –40VOutput Current DDTA123ECADDTA143ECADDTA114ECADDTA124ECADDTA144ECADDTA115ECAI O-100-100-50-30-30-20mAOutput Current I C (Max) -100 mAThermal Characteristics @T A = 25°C unless otherwise specifiedCharacteristic SymbolValue UnitPower Dissipation (Note 5 & 6) P D200 mW Thermal Resistance, Junction to Ambient Air (Note 5) RθJA625 °C/W Operating and Storage Temperature Range T J, T STG-55 to +150 °CNotes: 5. Mounted on FR4 PC Board with minimum recommended pad layout6. 150mW per element must not be exceeded.Electrical Characteristics@T A = 25°C unless otherwise specifiedCharacteristic SymbolMinTypMaxUnitTestConditionInput Voltage V l(off)-0.5 -1.1 ⎯VV CC = -5V, I O = -100μAV l(on)⎯-1.9 -3V O = -0.3V, I O = -20mA, DDTA123ECAV O = -0.3V, I O = -20mA, DDTA143ECAV O = -0.3V, I O = -10mA, DDTA114ECAV O = -0.3V, I O = -5mA, DDTA124ECAV O = -0.3V, I O = -2mA, DDTA144ECAV O = -0.3V, I O = -1mA, DDTA115ECAOutput Voltage V O(on)⎯-0.1 -0.3 V I O/I l = -10mA/-0.5mA DDTA123ECA I O/I l = -10mA/-0.5mA DDTA143ECA I O/I l = -10mA/-0.5mA DDTA114ECA I O/I l = -10mA/-0.5mA DDTA124ECA I O/I l = -10mA/-0.5mA DDTA144ECA I O/I l = -5mA/-0.25mA DDTA115ECAInput Current DDTA123ECADDTA143ECADDTA114ECADDTA124ECADDTA144ECADDTA115ECAI l⎯⎯-3.8-1.8-0.88-0.36-0.18-0.15mA V I = -5VOutput Current I O(off)⎯⎯-0.5 μA V CC = -50V, V I = 0VDC Current Gain DDTA123ECADDTA143ECADDTA114ECADDTA124ECADDTA144ECADDTA115ECAG l202030566882⎯⎯⎯V O = -5V, I O = -20mAV O = -5V, I O = -10mAV O = -5V, I O = -5mAV O = -5V, I O = -5mAV O = -5V, I O = -5mAV O = -5V, I O = -5mAInput Resistor Tolerance ΔR1-30 ⎯+30 % ⎯Resistance Ratio Tolerance ΔR2/R10.8 1 1.2 % ⎯Gain-Bandwidth Product f T⎯250 ⎯MHz V CE = -10V, I E = -5mA,f = 100MHzTypical Characteristics – DDTA143ECA-5050100150250200150501000T , AMBIENT TEMPERATURE (C)Fig. 1 Derating CurveA °P , P O W E R D I S S I P A T I O N (m W )d 0.0010.010.111020304050V , C O L L E C T O R E M I T T E R V O L T A G E (V )C E (S A T )I , COLLECTOR CURRENT (mA)Fig. 2 V vs. IC CE(SAT) C101,0001001110100h , D C C U R R E N T G A I NF E I , COLLECTOR CURRENT (mA)Fig. 3 DC Current GainC0246102030C , C A P A C I T A N C E (p F )O B V , REVERSE BIAS VOLTAGE (V)Fig. 4 Output CapacitanceR 12105152580.010.111010012348910I , C O L L E C T O R C U R R E N T (m A )C V , INPUT VOLTAGE (V)Fig. 5 Collector Current vs. Input Voltage in 56701101020304050I , COLLECTOR CURRENT (mA)Fig. 6 Input Voltage vs. Collector CurrentC V , I N P U T V O L T A G E (V )i nPackage Outline DimensionsSuggested Pad LayoutSOT23Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.0130.10 0.05 K 0.903 1.10 1.00 K1 - - 0.400 L 0.45 0.61 0.55 M 0.0850.18 0.11α0° 8°- All Dimensions in mmDimensions Value (in mm)Z2.9 X 0.8 Y 0.9 C 2.0 E 1.35X EYCZIMPORTANT NOTICEDIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.LIFE SUPPORTDiodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:A. Life support devices or systems are devices or systems which:1. are intended to implant into the body, or2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in thelabeling can be reasonably expected to result in significant injury to the user.B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.Copyright © 2011, Diodes Incorporated分销商库存信息:DIODESDDTA114ECA-7-F DDTA143ECA-7-F DDTA144ECA-7-F DDTA124ECA-7-F DDTA115ECA-7-F DDTA123ECA-7-F DDTA124ECA-7DDTA144ECA-7DDTA115ECA-7 DDTA123ECA-7DDTA114ECA-7DDTA143ECA-7。

PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9861601Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9861601QEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 5962-9861601QFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 74AHCT123ADGVRE4ACTIVE TVSOP DGV162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123AD ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123ADBR ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123ADBRE4ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123ADE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123ADGVR ACTIVE TVSOP DGV162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123ADR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123ADRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123AN ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74AHCT123ANE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74AHCT123APWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT123APWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ54AHCT123AFK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54AHCT123AJ ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SNJ54AHCT123AW ACTIVE CFP W161TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网元器件交易网元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。

13.06.2016 ­ 05:12:41hDatasheet ­ AZM 161SK­12/03RIA­024­B6LSolenoid interlock / AZM 161I / AZM 161I­B6L(Minor differences between the printed image and the original product may exist!)• Compact design • left­hand model• Interlock with protection against incorrect locking.• For very smal actuating radii in line with or at 90° to the plane of the actuator• Individual coding• Coding level "High" according to ISO 14119 • Double­insulated • High holding force • Long life• 130 mm x 90 mm x 30 mm • 1 Cable entry M 20 x 1.5• Screw connection• Manual release, lateralOrdering detailsProduct type description AZM 161SK­12/03RIA­024­B6L Article number101217541EAN code 4030661412481eCl@ss 27­27­26­03ApprovalApprovalBG USA/CAN CCCClassificationStandardsEN ISO 13849­1B 10d Normally­closed contact (NC) 2.000.000Mission time 20 Y earsnoticeGlobal PropertiesProduct name AZM 161IStandards EN 60947­5­1, BG­GS­ET­19Compliance with the Directives (Y/N) Y esNumber of actuating directions3 pieceActive principle electromechanical­ Individual coding­ Coding level "High" according to ISO 14119Duty cycle Magnet 100 %Materials­ Material of the housings glass­fibre reinforced thermoplastic, Plastic self­extinguishing,­ Material of the actuator Stainless steel­ Material of the contacts SilverHousing coating NoneWeight465 gMechanical dataDesign of electrical connection Screw connectionCable section­ Min. Cable section1 x 0,25 mm²­ Max. Cable section1 x 1.5 mm², flexibleMechanical life> 1.000.000 operationsnotice All indications about the cable section are including the conductorferrules.Emergency unlocking device (Y/N)NoManual release (Y/N)Y esEmergency release (Y/N)NoLatching force30 NPositive break force30 Npositive break travel10 mmClamping force F2000 NMax. Actuating speed2 m/sMinimum actuating radius95 mmActuating frequency max. 1000 / hAmbient conditionsAmbient temperature­ Min. environmental temperature−25 °C­ Max. environmental temperature+60 °CProtection class IP67 to IEC/EN 60529Electrical dataDesign of control element Normally open contact (NO), Opener (NC)Switching principle Creep circuit elementNumber of auxiliary contacts1 pieceNumber of safety contacts5 piecePower to unlock NoPower to lock Y esRated control voltage U s24 VAC/DCPower consumption max. 10 WRated impulse withstand voltage U imp4 kVRated insulation voltage U i250 VThermal test current I the6 AUtilisation category AC­15: 230 V / 4 ADC­13: 24 V / 2,5 AMax. fuse rating6 A gG D­fuse To DIN EN 60269­1ATEXExplosion protection categories for gases NoneExplosion protected category for dusts NoneMiscellaneous dataApplicationssliding safety guard,removable guard,hinged safety guardDimensionsDimensions of the sensor­ Width of sensor130 mm­ Height of sensor90 mm­ Length of sensor30 mmnoticeActuating radius adjustable, minimum 95 mm, using an hexagonal key wrench 2 mm A/F (a)The actuator is not available separately.The axis of the hinge should be 11 mm above the top edge of the safety switch and in the same plane Manual release• For maintenance, installation, etc.• For manual release using M5 triangular key, available as accessoryIncluded in deliveryIncluded in delivery• Individually coded actuator• tamperproof screws• Slot sealing plugsDiagramNote Diagrampositive break NC contactactiveno activeNormally­open contactNormally­closed contactSwitch travel diagramNotes Switch travel diagramContact closedContact openSetting rangeBreak pointPositive opening sequence/­ angleVS adjustable range of NO contactVÖ adjustable range of NC contactN after travelOrdering suffixThe applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 161SK­12/03RIA­024­B6L­1637...­16370,3 µm gold­plated contactsDocumentsOperating instructions and Declaration of conformity (en) 562 kB, 20.01.2016Code: mrl_azm161i_enOperating instructions and Declaration of conformity (jp) 767 kB, 12.04.2016Code: mrl_azm161i_jpOperating instructions and Declaration of conformity (nl) 511 kB, 15.08.2012Code: mrl_azm161i_nlOperating instructions and Declaration of conformity (da) 504 kB, 27.08.2012Code: mrl_azm161i_daOperating instructions and Declaration of conformity (de) 565 kB, 20.01.2016Code: mrl_azm161i_deOperating instructions and Declaration of conformity (pl) 589 kB, 06.04.2016Code: mrl_azm161i_plOperating instructions and Declaration of conformity (es) 444 kB, 09.03.2016Code: mrl_azm161i_esOperating instructions and Declaration of conformity (pt) 510 kB, 27.08.2012Code: mrl_azm161i_ptOperating instructions and Declaration of conformity (sv) 498 kB, 27.08.2012Code: mrl_azm161i_svOperating instructions and Declaration of conformity(cs) 586 kB, 19.04.2016Code: mrl_azm161i_csOperating instructions and Declaration of conformity (it) 562 kB, 19.04.2016Code: mrl_azm161i_itOperating instructions and Declaration of conformity (fr) 567 kB, 28.04.2016Code: mrl_azm161i_frEAC certification (ru) 809 kB, 05.10.2015Code: q_6040p17_ruImagesProduct photoDimensional drawing (actuator)Actuating radiusActuating radiusK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D­42279 WuppertalThe data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 13.06.2016 ­ 05:12:41h Kasbase 3.2.2.F.64I。

ATMEGA16A中文资料高性能,低功耗AVR 8-bit微控制器•高级RISC建筑– 131条指令–绝大多数为单时钟周期执行– 32 x 8通用工作寄存器–全静态工作–高达16吞吐量在MIPS 16 MHz–片2—cycle乘数高耐久性非易失性内存段– 16K字节的程序存储器，在系统内可编程Flash– 512字节的EEPROM– 1K字节内部SRAM–写/擦除周期：10，000闪光/ 100，000的EEPROM–数据保存：在20年85°C/100年在25°C（1)–可选引导具有独立锁定Bits代码段•在系统编程的片上引导程序•真Read-While-Write操作–锁编程软件安全JTAG (IEEE std。

1149.1兼容）接口–边界扫描功能根据JTAG标准–广泛的片上调试支持–编程闪存，EEPROM，熔丝位和锁定Bits通过JTAG接口外设特点–两个8—bit定时器/计数器具有独立预分频器和比较模式–一个16-bit定时器/计数器具有独立预分频器,比较功能和捕捉模式–实时计数器具有独立振荡器–四PWM频道– 8-channel, 10-bit ADC• 8单端通道• 7在TQFP 包装差分通道只有• 2在1x, 10x,差分通道具有可编程增益或200x–面向字节的两线串行接口可编程串行USART的––主/从串行接口SPI–可编程看门狗定时器具有独立片内振荡器–片内模拟比较器单片机的特殊功能–上电复位和可编程的掉电检测–内部振荡器校准RC–外部和内部中断源– 6种睡眠模式：空闲，ADC降噪，省电，省电，待机和扩展待机I / O和封装– 32可编程I / O线– 40—pin PDIP, 44—lead TQFP，和44—pad QFN/MLF 工作电压– 2。

7为- 5。

5V ATmega16A速度等级– 0 —为16 MHz ATmega16A功耗＠ 1 MHz, 3V，和25°C为ATmega16A–活动:0。