SCI论文模板
- 格式:doc
- 大小:102.00 KB
- 文档页数:10
Title:论文题目×××Zhang Qingke1,Yang Bo,Chen Yuehui,Wang lin(作者的隶属单位)Abstract:。
(约250words)Keywords:xxxx;xxxx;xxxx;xxxxxx;xxxxxxxx;xxx;xxxxxxxxxx; (6-7个)1 Introduction写完Results和Discussion,你会对这篇文章内容有着更深入的理解。
这个时候,才回过头写Introduction。
这样做的目的是便于你在Introduction部分提出的一些假设或者预设的问题与Discussion的主要讨论问题前后呼应。
第一段:笼统的介绍该方向研究的意义第二段:综述前人的工作,提出目前的不足或相关的信息,引出该工作的工作动机第三段:根据分析提出某种假设第四段:简单介绍该工作开展的思路,方法,目标,和可能的结论2 Materials and Methods这部分中最好写的。
实事求是地描叙自己的实验材料,实验设计、实验过程、测定方法,数据的采集,分析、计算及其统计方法等。
当然,你也不要一字不漏地描写你的材料与实验过程。
过细,容易造成后面的结果与讨论部分显的单薄,文章整体看上去就会头大身子小,不协调。
过粗,读者看不明白,甚至怀疑你的结果。
因此,这个部分需要有分寸。
原则是主要结果的材料与方法可以偏细,而基本状等次要的部分一笔带过。
实验材料,实验设计,实验过程,数据采集,分析技术及其统计方法。
实事求是地描叙自己的实验材料,实验设计、实验过程、测定方法,数据的采集,分析、计算及其统计方法等。
3 Result在写之前,先列几个subsections,把相对应的图表放进去。
描写一张表或者一副图,第一句应该是交代这个表或者图所表达的主题,然后依次述说。
可以从大到小,可以由特征A到特征B……。
这里需要注意的是条理清楚,重点突出。
一般在Results中,我不喜欢讨论。
sci论文格式模板篇一:优秀SCI论文结构范例优秀SCI论文结构范例1、Abstract——对自己工作及其贡献的总结:a)阐述问题;b)说明自己的解决方案和结果。
2、Introduction——背景,以及文章的大纲:a)题X是重要的;b)前人的工作A、B曾经研究过这个问题;c)A、B有一些缺陷;d)我们提出了方法D;e)D的基本特征,和A、B进行比较;f)实验证明D比A、B优越;g)文章的基本结构,大纲。
3、PreviousWork——说明自己与前人的不同:a)将历史上前人的工作分成类别;b)对每项重要的历史工作进行简短的回顾(一到几句),注意要回顾正确,抓住要点,避免歧义;c)和自己提出的工作进行比较;d)不要忽略前人的重要工作,要公正评价前人的工作,不要过于苛刻;e)强调自己的工作和前人工作的不同,最好举出各自适用例子。
4、OurWork——描述自己的工作,可分成多个部分:a)从读者角度阐明定义和表示法;b)提供算法的伪码,图解和相应解释;c)用设问的方式回答读者可能提出的潜在问题;d)复杂的冗长的证明和细节可以放在附录中,这里关键是把问题阐述清楚;e)特例和例外应该在脚注中给予说明。
5、Experiments——验证提出的方法和思路:a)合理地设计实验(简洁的实验和详尽的实验步骤)b)必要的比较,突出科学性;c)讨论,说明结果的意义;d)给出结论。
6、Conclusion——总结、前景及结文:a)快速简短的总结;b)未来工作的展望;c)结束全文。
7、References——对相关重要背景文献全面引用:a)选择引文(众所周知的结论不必引用,其他人的工作要引用);b)与前文保持一致。
8、Others——致谢、附录、脚注。
篇二:SCI论文的五种类型SCI论文的五种类型来源:医学论文发表——达晋医学编译我们要投SCI期刊,首先当然先要了解SCI期刊接受SCI 论文的类型了,由于我国SCI论文的现状使得很多作者不是很清楚SCI期刊接受文章的类型,那么接下来达晋医学编译小编给大家说说期刊接受的五大类型。
sci 投稿cover letter写作模板尊敬的SCI杂志编辑:
我谨提交我研究团队的最新论文,题目为《XXX》。
我们深信这篇论文将为贵刊的读者带来新的视角和启发,希望能够得到您的审阅和考虑。
我们的研究主要围绕XXX展开,经过长时间的实验和数据分析,我们得出了令人振奋的结果。
通过本研究,我们不仅深化了对XXX的理解,同时也为相关领域的未来研究提供了有益的参考。
我们选择将这篇论文提交给贵刊,是因为我们深知贵刊在该领域的权威和影响力。
我们期待着能够借助贵刊的平台,与广大同行分享我们的研究成果,并为学术界的发展贡献自己的力量。
在此,我代表全体作者感谢您对我们论文的重视和关注。
我们将非常乐意听取您的意见和建议,希望能够与您携手共同推动学术研究的进步。
再次感谢您抽出时间来审阅我们的论文,期待早日收到您的回复。
谢谢!
此致
作者:XXX
XXX大学
日期:XXXX年XX月XX日。
cover lettersci写作模板在学术和科研领域,SCI(科学引文索引)论文的发表是展示研究成果和学术水平的重要方式。
而在投稿过程中,一封专业、规范的Cover Letter能够给期刊编辑留下良好的第一印象,提高论文被录用的可能性。
本文为您提供一份实用的Cover Letter SCI写作模板,助您顺利发表学术论文。
[您的姓名][您的职位/学历][您的单位/学校][您的地址][您的邮箱][您的电话][日期][期刊名称][期刊地址]尊敬的[期刊名称]编辑:您好!我代表我的研究团队,向您提交一篇题为“[论文标题]”的研究论文,希望能在贵刊发表。
以下是我们论文的主要创新点和亮点:1.[创新点1]2.[创新点2]3.[创新点3]我们相信,这篇论文的研究成果将对[相关领域]产生积极影响,为后续研究提供新的思路和方向。
在此,我们诚挚地邀请贵刊的同行专家对这篇论文进行审阅。
以下是我们论文的简要介绍:[论文摘要或研究背景]根据贵刊的投稿要求,我们已确保论文格式符合规定,并按照期刊的审稿流程进行了认真修改。
此外,我们承诺论文未在其他期刊或会议投稿,不存在一稿多投现象。
我们深知贵刊在学术界的重要地位,以及严谨的审稿流程。
因此,我们希望能得到贵刊专家的宝贵意见和建议,以进一步提高论文的质量。
在此,我们感谢贵刊在审稿过程中所付出的辛勤努力。
如有需要,请随时通过以下方式与我们联系:[您的邮箱][您的电话]再次感谢您对这篇论文的关注和支持。
期待您的回复,祝好!顺祝商祺![您的姓名]附件:[论文全文]结束语:请根据您的实际情况,修改和完善这份Cover Letter模板,使其更加符合您的论文和投稿需求。
在撰写过程中,注意保持礼貌、简洁和专业性,以提高论文被录用的概率。
sci附录格式范例1.引言1.1 概述在SCI论文中,概述部分是文章的开篇部分,用于引导读者了解研究的背景和目的。
概述将简要介绍研究问题、研究动机以及该研究的重要性。
以下是概述部分的一般内容模板,供参考:概述在科学研究领域中,围绕xxx问题的研究一直备受关注。
随着科技发展和人类社会的进步,xxx问题在xxx领域中扮演着重要的角色。
然而,迄今为止,对于xxx问题的深入研究仍然存在各种挑战和未解之谜。
因此,本文的目的是通过对xxx问题的深入探索,以期揭示其内在机理并提出可能的解决方案。
通过对xxx问题的系统分析与研究,将有助于拓宽我们对xxx的认知,并为未来相关领域的研究提供有益的参考。
为了实现这一目标,我们将着重讨论以下方面:首先,我们将回顾历史上对于xxx问题的研究进展,并总结已有研究的不足之处。
通过对过去研究的回顾,我们可以更好地理解研究问题的重要性和复杂性。
其次,我们将详细介绍本文的方法和实验设计。
我们将采用xxx方法和技术来解决xxx问题,并结合大规模数据和有力的实验证据进行分析。
通过严格的实施实验和科学的数据分析,我们期望能够得出准确可靠的结论。
最后,我们将对本文的结构进行简要概述。
本文将分为以下几个部分:第二部分将介绍xxx问题的背景及其相关研究。
第三部分将详细介绍研究方法和实验设计。
第四部分将展示实验结果和数据分析。
最后,第五部分将对实验结果进行讨论,并提出未来的研究展望。
通过对xxx问题的深入研究,我们期望能够为相关领域的学者和研究人员提供更多的见解和启发,并为xxx问题的解决做出积极的贡献。
以上是概述部分的内容。
根据具体研究内容和论文结构的需要,您可以对模板进行适当修改和调整,以使其更符合您的研究内容和写作风格。
1.2 文章结构文章结构是指文章的整体框架和组织方式,在写作过程中对整篇文章进行了合理的分章节和段落,使读者更易于理解和阅读。
本文将按照以下结构进行论述:引言部分、正文部分和结论部分。
sci pre-submission 模板sci presubmission 模板标题:A Step-by-Step Guide to Writing a Successful SCI Paper [SCI 论文撰写成功的一步一步指南]引言:SCI (Science Citation Index)是世界上最权威、最有影响力的科技文献数据库之一,SCI论文的发表对学术界和科研工作者来说至关重要。
然而,许多人在撰写SCI论文时感到困惑和挫败。
本文将为您提供一份详尽的指南,帮助您一步一步撰写成功的SCI论文。
1. 研究主题选择选择一个适当和有价值的研究主题是SCI论文撰写的关键。
首先,了解当前学术界的研究热点和前沿,选择与之相关的主题。
其次,确保题目具有一定的科学价值和创新性,即您的研究内容能够为学术界和社会做出新的贡献。
2. 文献综述在撰写SCI论文之前,进行文献综述是必不可少的步骤。
阅读相关领域的文献,了解已有研究的进展和不足之处。
文献综述将有助于您确定研究的目标和方法,同时还能使您对该领域的现状有更深入的理解。
3. 研究设计和实验根据您的研究目标,设计合适的实验方案。
确定要使用的材料、方法和研究过程。
确保您的实验设计能够合理、可靠地回答您的研究问题,并且结果具有统计学意义。
4. 数据收集和分析在实验过程中,收集相关数据,并进行适当的数据分析。
选择适当的统计方法,确保您的数据分析结果能够支持您的研究结论和假设。
同时,保持数据的准确性和可重复性,以便其他研究者可以验证您的结果。
5. 结果和讨论根据数据分析的结果,撰写SCI论文的结果和讨论部分。
确保结果的准确性和清晰度,同时对研究结果进行详尽的解释和分析。
讨论部分应对您的研究目标进行细致的说明,并与已有的文献进行比较和讨论。
6. 引言和方法撰写SCI论文的引言和方法部分。
引言部分应介绍您的研究背景、目的和意义。
方法部分应详细描述您的实验设计、材料和方法步骤,以及数据分析方法。
sci论文标准格式sci题目:题目应能概括整个论文最重要的内容、简明、恰当,引人注目,力求简短,一般不宜超过20字,可用小标题加以说明。
sci中文摘要与关键词:论文摘要是论文的缩影,应以精练、准确的语言,简单论述论文的选题价值、编写目的、主要观点、研究方法等,要突出本论文的创造性成果或新见解。
尽可能地保留论文的基本信息。
标题“摘要”设置成字体:黑体,水平居中对齐;字号:三号;行距:固定值20磅;段前、段后均为自动。
摘要正文后,列出3-8个关键词。
关键词与内容摘要之间空一行。
标题“关键词”设置为黑体、小四。
关键词间用分号间隔,末尾不加标点。
字体:宋体;字号:小四。
sci英文摘要与关键词:内容应与中文“内容摘要”对应。
使用第三人称,最好采用现在时态编写。
标题“Abstract” (内容摘要) 设置成字体:Times New Roman,加粗;居中;三号;行距:固定值20磅;段前、段后均为自动。
Abstract正文选用设置成每段落首行缩进2字(4字母位),字体:Times New Roman,字号:小四,行距:固定值20磅;段前、段后均为0行;取消网格对齐选项。
Key words与Abstract之间空一行。
Key words与中文“关键词”一致。
标题“Key words”设置为Times New Roman、四号、加粗;关键词间用分号间隔,末尾不加标点,3-8个,Times New Roman,小四。
sci论文目录:标题“目录”设置成字体:黑体,居中;字号:三号;行距:1.5倍行距;段前、段后均为自动;目录结构为25磅行距,两端对齐;一级标题设置为四号字,黑体;二级标题设置为小四,宋体;目录所含正文结构一般列至二级标题即可。
所含内容摘要页可选标为罗马字符页码(如I,II……)标注;正文须重新以阿拉数字设起始页(如1,2……)标注。
sci论文序言(导论):内容为本研究领域的国内外现状,本论文所要解决的问题,该研究工作在经济建设、科技进步和社会发展等基本方面的应用价值与理论意义。
SCI论文发表格式模板本文档格式为WORD,感谢你的阅读。
最新最全的学术论文期刊文献年终总结年终报告工作总结个人总结述职报告实习报告单位总结演讲稿SCI论文发表格式模板目前我国科技界对SCI论文概念模式,小部分研究者误认为SCI是一本期刊,而由于南京大学率先引用并愈来愈成为各大高校和科研机构学术评价和奖惩的一类刊物,以下是SCI格式模板,供大家阅读查看。
AbstractAbstract:整体要求简练,言简意赅,因为绝大部分journal对Abstract都有字数限制,一般150~250 words。
先简单描述一下自己工作的前沿背景,几句话,然后引出自己的实验(“In this paper….”; “Herein...” or “Here, we…”),主要陈述实验结果,可稍带提一下所用到的重要方法的名称,然后说明你的结果的意义“There data suggest….”;最后总结拔高“In a word….”or “in summary…..”。
摘要中谓语动词的时态基本上分一般现在时和一般过去时两种。
由于科研通常采用一般现在时,所附摘要自然也多用一般现在时态。
(1) 叙述研究方法和目的时,使用一般现在时态。
A. This article sets out four of the main misconcepts, discusses why they have arisen, and why they can be so described.B. To answer this, the author explores two new algorithms:a.keep in the cache documents that take the longest to retrieve; and e a hybrid of several factors…(2)推导研究结果时用一般现在时态。
A.The results show that the period of induction and the patent period of stressor can be initially confirmed by the electrical conductivity of medium and the variability of soluble protein in tomato.B.A method for stiffness calculation undervertical load is devised.(3) 回顾研究过程时,用一般过去时态。
【sci论文格式模板】sci期刊论文格式模板sci是由美国科学信息研究所(ISI)1961 年创办出版的引文数据库,它的论文格式是怎么样的呢?下面是小编精心推荐的一些sci论文格式模板,希望你能有所感触!sci论文格式模板1、题目:应简洁、明确、有概括性,字数不宜超过20个字。
2、摘要:要有高度的概括力,语言精练、明确,中文摘要约100200字;3、关键词:从论文标题或正文中挑选3~5个最能表达主要内容的词作为关键词。
4、目录:写出目录,标明页码。
5、正文:论文正文字数一般应在3000字以上。
论文正文:包括前言、本论、结论三个部分。
前言(引言)是论文的开头部分,主要说明论文写作的目的、现实意义、对所研究问题的认识,并提出论文的中心论点等。
前言要写得简明扼要,篇幅不要太长。
本论是论文的主体,包括研究内容与方法、实验材料、实验结果与分析(讨论)等。
在本部分要运用各方面的研究方法和实验结果,分析问题,论证观点,尽量反映出自己的科研能力和学术水平。
结论是论文的收尾部分,是围绕本论所作的结束语。
其基本的要点就是总结全文,加深题意。
6、谢辞:简述自己通过做论文的体会,并应对指导教师和协助完成论文的有关人员表示谢意。
7、参考文献:在论文末尾要列出在论文中参考过的专著、论文及其他资料,所列参考文献应按文中参考或引证的先后顺序排列。
8、注释:在论文写作过程中,有些问题需要在正文之外加以阐述和说明。
9、附录:对于一些不宜放在正文中,但有参考价值的内容,可编入附录中。
关于sci的论文范文二级单位SCI发表文章情况统计与分析方法摘要:SCI文章发表情况的统计与分析对于科管部门非常重要。
作为二级单位的科管部门对于统计隶属于本单位发表的文章存在一定难度,目前尚缺乏相关介绍。
本文以重庆医科大学附属第二医院为例,详细介绍了如何利用ISI-Web of Science工具统计二级单位SCI 文章发表情况。
关键词:SCI文章发表情况;ISI-Web of Science;统计与分析Secondary Department SCI Published Articles Statistics and Analysis MethodsLU Yi(Chongqing Medical University Second Affiliated Hospital Research Department,Chongqing 400010,China)Abstract:Statistical analysis of paper publication is a critical work to the department of research. However,it is difficult to identify its SCI papers to a subordinate organization. To address this problem,we use the Affiliated Hospital 2 of Chongqing Medical University as an example to illustrate how to Statisticalanalysis of SCI-paper-publication of subordinate organization by using ISI-Web of Science tools.Key words:SCI articles published case; Statistics and analysis; ISI-Web of Science文章发表情况,特别是SCI文章发表情况是衡量一个单位科研水平的一个非常重要的指标。
sci投稿修改模板当你需要修改SCI(Science Citation Index)投稿时,以下是一个可以参考的模板:尊敬的编辑(或者指定的编辑姓名):我是提交的论文(论文标题)的作者之一,编号为(论文编号)。
非常感谢您和审稿人对我们的研究工作给予的宝贵意见和建议。
在此,我按照您的要求进行了修改,并将修改后的论文重新提交给您。
首先,我针对审稿人提出的每一条意见进行了详细的回复,并在论文中进行了相应的修改。
以下是我对每个问题的回答和修改的概述:1. 问题1,(描述问题1)。
回答,(我对问题1的回答,解释为什么我做出了这样的修改)。
修改,(详细说明我对问题1的修改,包括具体的修改内容和位置)。
2. 问题2,(描述问题2)。
回答,(我对问题2的回答,解释为什么我做出了这样的修改)。
修改,(详细说明我对问题2的修改,包括具体的修改内容和位置)。
以此类推,我对每个问题进行了类似的回答和修改。
在修改过程中,我尽量保持了原文的逻辑和结构,并对问题进行了全面的修正和改进。
除了审稿人提出的问题,我还对论文的其他方面进行了进一步的修改和完善。
以下是我对论文的其他修改概述:1. 结构调整,我对论文的结构进行了调整,使其更加清晰和易读。
我重新组织了段落和章节,确保了论文的逻辑流畅性。
2. 文字表达,我对论文中的文字表达进行了精细的修改,修正了语法错误、句子结构和词汇选择。
我还对论文中的科技术语进行了统一和准确的使用。
3. 图表优化,我重新设计了论文中的图表,使其更加清晰易懂。
我修正了图表中的标注和单位,并调整了图表的尺寸和位置,以提高其可读性。
4. 文献引用,我对论文中的文献引用进行了仔细的检查和修正,确保其与正文内容的一致性和准确性。
我还添加了一些新的参考文献,以支持论文的观点和结论。
总的来说,我对论文进行了全面的修改和完善,以回应审稿人的意见和建议。
我相信这些修改能够进一步提升论文的质量和可读性,并使其更加适合发表在SCI期刊上。
Running title: Li et al. On….An improved shuffled frog-leaping algorithm for knapsack problem Authors’ nameAffiliationCorrespondence autuor(通讯作者:): tel/fax XXX; e-mail: XXXAbstractShuffled frog-leaping algorithm (SFLA) has long been considered as new evolutionary algorithm of group evolution, and has a high computing performance and excellent ability for global search. Knapsack problem is a typical NP-complete problem. For the discrete search space, this paper presents the improved SFLA, and solves the knapsack problem by using the algorithm. Experimental results show the feasibility and effectiveness of this method.Keywords: shuffled frog-leaping algorithm; knapsack problem; optimization problem0 IntroductionKnapsack problem(KP) is a very typical NP-hard problem in computer science, which was first proposed and studied by Dantzing in the 1950s. There are many algorithms for solving the knapsack problem. Classical algorithms for KP are the branch and bound method (BABM), dynamic programming method(分支界定法和动态规划法), etc. However, most of such algorithms are over-reliance on the features of problem itself, the computational volume of the algorithm increases by exponentially, and the algorithm needs more searching time with the expansion of the problem. Intelligent optimization problem for solving NP are the ant colony algorithm, greedy algorithm, etc. Such algorithms do not depend on the characteristics of the problem itself, and have the strong global search ability. Related studies have shown that it can effectively improve the ability to search for the optimal solution by combining the intelligent optimization algorithm with the local heuristic searching algorithm.Shuffled frog-leaping algorithm is a new intelligent optimization algorithm, it combines the advantages of meme algorithm based on genetic evolution and particle swarm algorithm based on group behavior. It has the following characteristics: simple in concept, few parameters, the calculation speed, global optimization ability, easy to implement, etc. and has been effectively used in practical engineering problems, such as resource allocation, job shop process arrangements, traveling salesman problem, 0/1 knapsack problem, etc. However, the basic leapfrog algorithm is easy to blend into local optimum, and thus this paper improved the shuffled frog-leaping algorithm to solve combinatorial optimization problems such as knapsack problem. Experimental results show that the algorithm iseffective in solving such problems.1 The mathematical model of knapsack problemKnapsack problem is a NP-complete problem about combinatorial optimization, which is usually divided into 0/1 knapsack problem, complete knapsack problem, multiple knapsack problem, mixed knapsack problem, the latter three kinds can be transformed into the first, therefore, the paper only discussed the 0/1 knapsack problem. The mathematical model of 0/1 knapsack problem can be described as:00max (x 10,1,2,...,)n i i i n i i i i x v x w C or i n ==⎧⎪⎪⎨⎪≤==⎪⎩∑∑ where: n is the number of objects; w i is the weight of the i th object(I = 1, 2…n ); v i is the value of the i th object; x i is the choice status of the i th object; when the i th object is selected into knapsack, defining variable x i = 1,otherwise x i = 0; C is the maximum capacity of knapsack.2 The basic shuffled frog-leaping algorithmIt generates P frogs randomly, each frog represents a solution of the problem, denoted by U i , which is seen as the initial population. Calculating the fitness of all the frogs in the population, and arranging the frog according to the descending of fitness. Then dividing the frogs of the entire population into m sub-group of, each sub-group contains n frogs, so P =m*n. Allocation method: in accordance with the principle of equal remainder. That is, by order of the scheduled, the 1, 2, ..., n frogs were assigned to the 1,2, ...., N sub-groupsseparately, the n+1 frog was assigned to the first sub-group, and so on, until all the frogs were allocated.For each sub-group, setting U B is the solution having the best fitness, U W is the solution having the worst fitness, U g is the solution having the best fitness in the global groups. Then, searching according to the local depth within each sub-group, and updating the local optimal solution, updating strategy is:{}{})min int((),,0max max int(()),,0max rand U U S U U B W B W rand U U S U U B W B W S --≥---≤⎧⎪=⎨⎪⎩ q w U U S =+where, S is the adjustment vector of individual frog, S max is the largest step size that is allowed to change by the frog individual. Rand is a random number between 0 and 1.3 The improved shuffled frog-leaping algorithm for KPA frog is on behalf of a solution, which is expressed by the choice status vector of object, then frog U = ( x 1, x 2, …, x n ), where, x i is the choice status of the i-th object; when the i-th object is selected into knapsack, defining variable x i = 1,otherwise x i = 0; f (i), the fitnessfunction of individual frog can be defined as:3.1 The local update strategy of frogThe purpose of implementing the local search in the frog sub-group is to search the local optimal solution in different search directions, after searching and iterating a certain numberof iterations, making the local optimum in sub-group gradually tend to the global optimum individual.Definition 1 Giving a frog’s status vector U, the switching sequence C(i,j) is defined:where, U i said the state of object i becomes from the selected to the cancel state, or in turn; U i= U j, object i and object j exchange places, that object i and object j are selected or deselected at the same time. U i≠U j, object i is selected or canceled, or in turn. Then the new vector of switching operation is:Definition 2 Selecting any two vectors U i and U j of frog from the group, D, the distance from U i to U j is all exchange sequences that U i is adjusted to U j.where, m is the number of adjusting.Based on the above definition, the update strategy of the individual frog is defined as follows:where, l is the number of switching sequence D(U B,U W) for updating U W; l max is the maximum number of switching sequence allowed to be selected; s is the switching sequence required for updating U W.3.2 The global information exchange strategyDuring the execution of the basic shuffled frog-leaping algorithm, the operation of updating the feasible solution was is executed repeatedly, it is usually to meet the situation that updating fail, the basic shuffled frog-leaping algorithm updates the feasible solution randomly, but the random method often falls into local optimum or reduces the rate of convergence of the algorithm.Obviously, the key that overcoming the shortcomings of basic SFLA in evolution is: it is necessary to keep the impact of local and global best information on the frog jump, but also pay attention to the exchange of information between individual frogs. In this paper, first two jumping methods in basic SFLA are improved as follows:P n= P X + r1*(P g-Xp1 (t)) +r2*(P W-Xp2 (t)) ( 5)P n= P b + r3*(P g-Xp3 (t)) ( 6)Where, Xp1(t),Xp2(t),Xp3(t) are any three different individuals which are different from X. Meanwhile, removing the sorting operation according to the fitness value of frog individual from basic SFLA, and appropriately limiting the third frog jump. Thus, we get anefficient modified SFLA basing on the improvements of above. In the modified algorithm, the frog individual in the subgroup generates a new individual ( the first jump)by using formula (5),if the new individual is better than its parent entity then replacing the parent individual. otherwise re-generating a new individual (the frog jump again)by using (6).If better than the parent ,then replacing it. or when r4 ≤ FS (the pre-vector, its components are 0.2≤ FSi≤ 0.4),generating a new individual (the third frog jump ) randomly and replacing parent entity.The new update strategy will enhance the diversity of population and the search through of the worst individual in the iterative process, which can ensure communities’evolving continually, help improving the convergence speed and avoid falling into local optimum, and then expect algorithm both can converge to the nearby of optimal solution quickly and can approximate accuracy, improved the performance of the shuffled frog-leaping algorithm.4 Simulation experimentTwo classical 0/1 knapsack problem instances were used in the paper, example 1 was taken from the literature [11], example 2 was taken from the literature [12]. The comparison algorithm used in the paper was branch and bound method for 0/1 knapsack problem. Under the same experimental conditions, two instances of simulation experiments were conducted 20 times, the average statistical results were shown in Table 1 and Table 2.5 ConclusionThe shuffled frog-leaping algorithm is a kind of search algorithm with random intelligence and global search capability, this paper improved shuffled frog-leaping algorithm and solved the 0/1 knapsack problem by using the algorithm. Experiments show that the improved algorithm has better feasibility and effectiveness in solving 0/1 knapsack problem.AcknowledgementsThis work was supported by XXX(基金号). Our special thanks are due to Prof. XXX (name), XXX (affiliation), for his helpful discussion with preparing the manuscript.References:[7] Eusuff MM, Lansey KE. Optimization of water distribution network design using theshuffled frog leaping algorithm[J]. Water Resource Planning and Management, 2003, 129(3): 210~225[8] Ying-hai LI, Jian-zhong ZHOU, Jun-jie YANG. An improved shuffled frog-leapingalgorithm based on the selection strategy of threshold[J].Computer Engineering and Applications, 2007, 43(35): 19~21[9] Xue-hui LUO, YANG Ye, LI Xia. Improved shuffled frog-leaping algorithm for TSP[J].Journal of Communication, 2009, 30(7): 130~135[10] Zong-yi XUAN, Cui-jun ZHANG. Solving the KP based on shuffled frog-leapingalgorithm[J].Science Technology and Engineering,2009,9(15): 4363~4365[11] Zhao-yang, Shan-juan. A binary shuffled frog-leaping algorithm for 0/1 KP[11] Yi-chao HE.Greedy genetic algorithm and its application for KP[J].ComputerEngineering and Design,2007,28(11): 19~22[12] Ze-hui WU. Algorithm Design and Analysis[M]. Beijing: Higher EducationPress,1993:251~252。