2009年土耳其石材出口量下降超过10%

能感受M Q A魅力的靓声CD机Luxman D-03CD播放机文/田野图/小路产品代理：骏韵音响 市场零售价：¥22,500元/台 鸣谢新地影音提供器材试听!EClUIPlTiEiMT REVEUJ 点指#现在数字音乐成为了主流，几年前就已经有人认为CD 即将消亡，但直到现在CD 依然坚挺，各大厂牌继续推出各种CD ,而Hi -R 厂商也仍在努力制造更精准的CD 机。

高清音乐确实是高品质的音乐格式，很多厂商CD 播放和高 清解码两手抓，推出许多满足现在听音需求的播放机。

Luxman 新一代的中价位CD 播放机D -03X 就包括许多新功能，支持M Q A ，播放常规CD 和MQA CD ,也可通过USB 连接播放11.2[\/1比050文件及3841<也/32他？〇\/1数据 文件。

>配置在H i-R 音响企业中，有能力自行设计、生产CD 拾讯 机芯的品牌屈指可数，Luxman 是其中之一。

用于D -03X 身 上的，更是集品牌以往技术成果之大成，每项细节都尽善 尽美。

D -03X 的拾讯机芯特别考虑压抑共振和重量平衡， 再加上钢制顶板厚达8m m 的铝制底座、盒形金属罩，形成 一个超高刚性结构，将整个机芯以相关电路作全面覆盖。

在防止自身起震的同时，亦有效抵御外来震动传入，同时 全面屏蔽外来干扰，确保讯号正确而纯净。

Luxman 为D -03X 配置了每声道一片德州仪器 PCM 1975解码芯片并配置一个高精度时钟模块。

为了获得 最大的保真度，解码部分的差分输出向电压转换放大器提 供一组四个相同的电流，在平衡双单声道模式下工作。

而 低通滤波器与放大器以低阻抗驱动输出。

D -03X 使用一个 大尺寸变压器而且各部分电路都有独立的滤波电容器。

复 合无环底盘结构机器与接地阻抗和底盘电流隔离，同时屏 蔽磁场和数字噪声。

> Bulk Pet 増强USB 解码支持MQA 是D -03X 的一大亮点，而这个支持也十分全面， 除了播放MQA -CD 外，D -03X 还能通过同轴光纤和USB 解 码去播放MQA 的音乐文件，这是很难得的。

戴尔PowerEdge T310 塔式服务器配置参数及技术规格—成都美联诚科技有限公司合适的大小，灵活的技术和业务价值PowerEdge T310旨在通过提供比基本的入门级服务器更多的功能和更高的性能，满足不断成长的小型企业或远程办公室的需求。

T310可利用可选的高级系统管理功能（包括远程管理）进行自定义，拥有小巧的20.5英寸机箱、冗余性（如果需要）以及经济实惠的RAID选项，是理想的、强健且可靠的单插槽塔式服务器。

戴尔的目标是通过提供您需要的功能，为您的企业增值。

我们的目标是通过基于行业标准按需定制、经过创新设计且有针对性的解决方案，为您提供价值。

有针对性的设计PowerEdge T310是第11代PowerEdge服务器产品组合中的一个成员，它具有系统设计通用性和可靠性。

所有第11代服务器均以方便用户使用为构建理念。

所有外部端口、电源、LED指示灯和液晶屏幕都保持在原来的位置，用户不会觉得陌生，且易于安装和部署。

PowerEdge T310有针对性的设计可提供安静的运行环境，可选的交互式液晶屏幕位于面板的前侧，便于进行监控（有的型号不提供）。

坚固的金属材料硬盘托架以及整齐的布线旨在简化对服务器内部组件的维护并加快服务器内部的空气流动。

PowerEdge T310的机箱深度仅为20.5英寸，非常适合用在内勤办公室、零售店或小型办公室等需要小巧机箱和安静运行环境的场所。

能源优化技术智能节能技术应用到了PowerEdgeT310的核心系统级别。

这些能源优化的技术旨在提高服务器内的能效，同时继续提供您的业务需要的性能。

与前代产品相比，PowerEdge T310使用的电源功耗较低，并提供高效的有线或冗余电源选项。

T310还配有低气流风扇，可根据服务器工作负载需求提供更高的转速，尽可能减少不必要的噪音。

除此之外，内部组件布局合理，有利于气流流通，确保服务器低温运行。

T310还包括智能节能的电源管理功能，包括功率封顶、电源清点和电源预算，以便最好地管理您的特定环境中的电源。

型号品牌封装年份产地IRF510PBF IR TO-22007+无铅原装正品，中国产地IRF520N IR TO-22006+有铅原装正品，中国产地IRF530NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF530PBF IR TO-22007+无铅原装正品，墨西哥产地IRF540NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF540NSTRLPBF IR TO-22007+无铅原装正品，墨西哥产地IRL540NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF610PBF IR TO-22007+无铅原装正品，墨西哥产地IRF620PBF IR TO-22007+无铅原装正品，墨西哥产地IRF630NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF630PBF IR TO-22007+无铅原装正品，墨西哥产地IRF634PBF IR TO-22006+无铅原装正品，墨西哥产地IRF640N IR TO-22007+有铅原装正品，墨西哥产地IRF640NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF640NSTRL IR TO-26305+有铅原装正品，墨西哥产地IRF640PBF IR TO-22007+无铅原装正品，墨西哥产地IRF644PBF IR TO-22007+无铅原装正品，墨西哥产地IRF710PBF IR TO-22004+有铅原装正品，菲律宾产地IRF720PBF IR TO-22007+无铅原装正品，墨西哥产地IRF730PBF IR TO-22007+无铅原装正品，墨西哥产地IRF730IR TO-22004+有铅原装正品，墨西哥产地IRF740PBF IR TO-22007+无铅原装正品，韩国产地IRF820IR TO-22005+有铅原装正品，墨西哥产地IRF830PBF IR TO-22007+无铅原装正品，韩国产地IRF840PBF IR TO-22007+无铅原装正品，韩国产地IRF1010EPBF IR TO-22007+无铅原装正品，墨西哥产地IRF1310NPBF IR TO-22007+无铅原装正品，菲律宾产地IRF1404PBF IR TO-22007+无铅原装正品，墨西哥产地IRF1405PBF IR TO-22007+无铅原装正品，墨西哥产地IRF1405STRR IR TO-26306+有铅原装正品，墨西哥产地IRF1407PBF IR TO-22007+无铅原装正品，墨西哥产地IRF2807PBF IR TO-22007+无铅原装正品，墨西哥产地IRF2807S IR TO-26306+有铅原装正品，墨西哥产地IRF3205PBF IR TO-22007+无铅原装正品，墨西哥产地IRF3315IR TO-22004+有铅原装正品，墨西哥产地IRF3415PBF IR TO-22007+无铅原装正品，菲律宾产地IRF3710PBF IR TO-22007+无铅原装正品，墨西哥产地IRF4905PBF IR TO-22007+无铅原装正品，墨西哥产地IRF4905SPBF IR TO-26307+无铅原装正品，墨西哥产地IRF4905L IR TO-26205+有铅原装正品，墨西哥产地IRF5210PBF IR TO-22005+无铅原装正品，墨西哥产地IRF5210S IR TO-26305+有铅原装正品，墨西哥产地IRFR5035TRPBF IR SOT-25207+无铅原装正品，墨西哥产地IRF5305STRLPBF IR TO-26307+无铅原装正品，墨西哥产地IRF6216TRPBF IR SOP-807+无铅原装正品，印度产地IRF9510IR TO-22004+有铅原装正品，墨西哥产地IRF9520IR TO-22004+有铅原装正品，墨西哥产地IRF9530PBF IR TO-22007+无铅原装正品，墨西哥产地IRF9530NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF9540PBF IR TO-22007+无铅原装正品，墨西哥产地IRF9540NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF9610IR TO-22004+有铅原装正品，墨西哥产地IRF9630PBF IR TO-22007+无铅原装正品，墨西哥产地IRF9640PBF IR TO-22007+无铅原装正品，墨西哥产地IRF9640STRL IR TO-22005+有铅原装正品，墨西哥产地IRFZ24NPBF IR TO-22007+无铅原装正品，墨西哥产地IRLZ24NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ34NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ44NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ44RPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ44VPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ44ZPBF IR TO-22007+无铅原装正品，墨西哥产地IRLZ44NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ46NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ46N IR TO-22006+有铅原装正品，墨西哥产地IRFZ46ZPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ48VPBF IR TO-22007+无铅原装正品，墨西哥产地IRFZ48NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF9Z24NPBF IR TO-22007+无铅原装正品，墨西哥产地IRF9Z34NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFBC30PBF IR TO-22007+无铅原装正品，墨西哥产地IRFBC40PBF IR TO-22007+无铅原装正品，墨西哥产地IRFBC40IR TO-22004+有铅原装正品，墨西哥产地IRFIBC40GLC IR TO-22004+有铅原装正品，墨西哥产地IRFBE30PBF IR TO-22007+无铅原装正品，墨西哥产地IRFBG20PBF IR TO-22007+无铅原装正品，墨西哥产地IRFBG30PBF IR TO-22007+无铅原装正品，墨西哥产地IRFBG30IR TO-22006+有铅原装正品，墨西哥产地型号品牌封装年份产地HFA08TB60IR TO-22007+有铅原装正品，墨西哥产地8ETH06IR TO-22007+有铅原装正品，墨西哥产地IRFB3207PBF IR TO-22007+无铅原装正品，墨西哥产地IRFB4212PBF IR TO-22006+无铅原装正品，墨西哥产地IRFB4310PBF IR TO-22007+无铅原装正品，墨西哥产地IRFB4710PBF IR TO-22007+无铅原装正品，墨西哥产地IRFB11N50APBF IR TO-22007+无铅原装正品，墨西哥产地IRFB18N50KPBF IR TO-22007+无铅原装正品，墨西哥产地IRFB31N20DPBF IR TO-22007+无铅原装正品，墨西哥产地IRFB38N20DPBF IR TO-22006+无铅原装正品，墨西哥产地IRFB260NPBF IR TO-22007+无铅原装正品，墨西哥产地IRFP054NPBF IR TO-24707+无铅原装正品，中国产地IRFP064NPBF IR TO-24707+无铅原装正品，中国产地IRFP140NPBF IR TO-24707+无铅原装正品，墨西哥产地IRFP150IR TO-24705+有铅原装正品，中国产地IRFP150NPBF IR TO-24707+无铅原装正品，中国产地IRFP240PBF IR TO-24707+无铅原装正品，墨西哥产地IRFP250NPBF IR TO-24707+无铅原装正品，中国产地IRFP254N IR TO-24705+有铅原装正品，墨西哥产地IRFP260NPBF IR TO-24707+无铅原装正品，中国产地IRFP260N IR TO-24704+有铅原装正品，墨西哥产地IRFP264PBF IR TO-24707+无铅原装正品，墨西哥产地IRFP264NPBF IR TO-24707+有铅原装正品，中国产地IRFP350PBF IR TO-24706+无铅原装正品，中国产地IRFP360PBF IR TO-24706+无铅原装正品，中国产地IRFP448IR TO-24705+有铅原装正品，墨西哥产地IRFP450IR TO-24705+有铅原装正品，中国产地IRFP450PBF IR TO-24707+无铅原装正品，中国产地IRFP450LC IR TO-24705+有铅原装正品，墨西哥产地IRFP460LCPBF IR TO-24706+无铅原装正品，墨西哥产地IRFP460A IR TO-24705+有铅原装正品，中国产地IRFP460APBF IR TO-24707+无铅原装正品，墨西哥产地IRFP460PBF IR TO-24707+无铅原装正品，墨西哥产地IRFP2907PBF IR TO-24707+无铅原装正品，墨西哥产地IRFP3710IR TO-24705+有铅原装正品，墨西哥产地IRFP9140NPBF IR TO-24707+无铅原装正品，墨西哥产地IRFP9240PBF IR TO-24707+无铅原装正品，墨西哥产地IRFP90N20DPBF IR TO-24707+无铅原装正品，墨西哥产地IRFPC50PBF IR TO-24707+无铅原装正品，墨西哥产地IRFPC60PBF IR TO-24707+无铅原装正品，墨西哥产地IRFPE40PBF IR TO-24707+无铅原装正品，墨西哥产地IRFPE50PBF IR TO-24707+无铅原装正品，墨西哥产地IRFPF50PBF IR TO-24707+无铅原装正品，墨西哥产地IRFPG50PBF IR TO-24707+无铅原装正品，墨西哥产地IRFPS37N50APBF IR TO-24707+无铅原装正品，墨西哥产地IRG4PC30FPBF IR TO-24707+无铅原装正品，墨西哥产地IRG4PC40S IR TO-24705+有铅原装正品，墨西哥产地IRG4BC20UDPBF IR TO-22007+无铅原装正品，墨西哥产地IRG4BC30KDPBF IR TO-22007+无铅原装正品，墨西哥产地IRG4BC40U IR TO-22005+有铅原装正品，墨西哥产地IRG4BC40W IR TO-22005+有铅原装正品，墨西哥产地IRG4PF50WPBF IR TO-24707+无铅原装正品，墨西哥产地40TPS12APBF IR TO-24707+无铅原装正品，中国产地IR2101IR DIP-806+有铅原装正品，马来西亚产地IR2101STR IR SOP-805+有铅原装正品，马来西亚产地IR2103IR DIP-806+有铅原装正品，马来西亚产地IR2103PBF IR DIP-806+无铅原装正品，马来西亚产地IR2103STRPBF IR SOP-807+无铅原装正品，马来西亚产地IR2104STRPBF IR SOP-807+无铅原装正品，马来西亚产地IR2108IR DIP-806+有铅原装正品，马来西亚产地IR2110PBF IR DIP-1407+无铅原装正品，马来西亚产地IR2110STRPBF IR SOP-1407+无铅原装正品，马来西亚产地IR2111IR DIP-805+有铅原装正品，马来西亚产地IR2111STR IR SOP-805+有铅原装正品，马来西亚产地IR2111STRPBF IR SOP-807+无铅原装正品，马来西亚产地IR2112IR DIP-805+有铅原装正品，马来西亚产地IR2112STR IR SOP-806+有铅原装正品，马来西亚产地IR2112STRPBF IR SOP-807+无铅原装正品，马来西亚产地IR2113IR DIP-805+有铅原装正品，马来西亚产地IR2113S IR SOP-806+有铅原装正品，马来西亚产地IR2117IR DIP-805+有铅原装正品，马来西亚产地IR2117S IR SOP-806+有铅原装正品，马来西亚产地IR2151IR DIP-805+有铅原装正品，马来西亚产地IR2130S IR SOP-2805+有铅原装正品，马来西亚产地IR2132STR IR SOP-2805+有铅原装正品，马来西亚产地IR2153PBF IR DIP-806+无铅原装正品，马来西亚产地IR2520D IR DIP-806+有铅原装正品，马来西亚产地IR2520DPBF IR DIP-807+无铅原装正品，马来西亚产地IR2520DSTR IR SOP-806+有铅原装正品，马来西亚产地IRLZ24NPBF IR TO-22004+有铅原装正品，墨西哥产地型号品牌封装年份产地IR2153IR DIP-806+有铅原装正品，马来西亚产地IR2153STR IR SOP-805+有铅原装正品，马来西亚产地IR2153STRPBF IR SOP-807+无铅原装正品，马来西亚产地IR2155IR DIP-805+有铅原装正品，马来西亚产地IR2156PBF IR DIP-1406+无铅原装正品，马来西亚产地IR2156STRPBF IR SOP-1407+无铅原装正品，马来西亚产地IR2166IR DIP-1605+有铅原装正品，马来西亚产地IR2166S IR SOP-1606+无铅原装正品，马来西亚产地IR2184STRPBF IR SOP-807+无铅原装正品，马来西亚产地IRFD110PBF IR DIP06+无铅原装正品，马来西亚产地IRFD120PBF IR DIP07+无铅原装正品，马来西亚产地IRFD220IR DIP05+有铅原装正品，马来西亚产地IRFD9110IR DIP05+有铅原装正品，马来西亚产地IRFD9120PBF IR DIP07+无铅原装正品，马来西亚产地IRFD9220IR DIP05+有铅原装正品，马来西亚产地IRFR120NTRPBF IR SOT-25207+无铅原装正品，马来西亚产地IRFR024NTR IR SOT-25205+有铅原装正品，马来西亚产地IRFR024NTRPBF IR SOT-25207+无铅原装正品，马来西亚产地IRFR220NPBF IR SOT-25207+无铅原装正品，马来西亚产地IRFR420TR IR SOT-25206+有铅原装正品，马来西亚产地IRFR420TRPBF IR SOT-25207+无铅原装正品，马来西亚产地IRFR9024NTRPBF IR SOT-25207+无铅原装正品，马来西亚产地IRFR9120NTRPBF IR SOT-25207+无铅原装正品，马来西亚产地IRFU120NPBF IR TO-25107+无铅原装正品，墨西哥产地IRFU220NPBF IR TO-25107+无铅原装正品，墨西哥产地IRFU430A IR TO-25104+有铅原装正品，墨西哥产地IRFU9120NPBF IR TO-25107+无铅原装正品，墨西哥产地IRF7413TR IR SOP-806+有铅原装正品，马来西亚产地IRF7314TRPBF IR SOP-807+无铅原装正品，马来西亚产地IRFL9110TRPBF IR SOP-806+无铅原装正品，马来西亚产地IRL2203NPBF IR TO-22007+无铅原装正品，墨西哥产地IRL2703PBF IR TO-22007+无铅原装正品，墨西哥产地IRL3103PBF IR TO-22007+无铅原装正品，中国产地IRL3705N IR TO-22005+有铅原装正品，墨西哥产地IRL3803PBF IR TO-22007+无铅原装正品，墨西哥产地IRLML2402TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML2502TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML2803TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML5103TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML5203TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML6302TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML6401TRPBF IR SOT-2307+无铅原装正品，马来西亚产地IRLML6402TRPBF IR SOT-2307+无铅原装正品，马来西亚产地30CPQ060PBF IR TO-24707+无铅原装正品，中国产地30CPQ100PBF IR TO-24707+无铅原装正品，中国产地40CPQ045PBF IR TO-24707+无铅原装正品，中国产地40CPQ060PBF IR TO-24707+无铅原装正品，中国产地40CPQ100IR TO-24705+有铅原装正品，中国产地40CPQ100PBF IR TO-24707+无铅原装正品，中国产地MBR20100CTKPBF IR TO-22007+无铅原装正品，中国产地MBR6045WTPBF IR TO-24707+无铅原装正品，中国产地MUR420RLG ON DO-20107+无铅原装正品，菲律宾产地MUR460RLG ON DO-20107+无铅原装正品，菲律宾产地MUR860G ON TO-22007+无铅原装正品，菲律宾产地MUR8100EG ON TO-22007+无铅原装正品，菲律宾产地MUR1560G ON TO-22007+无铅原装正品，菲律宾产地MUR1620CTG ON TO-22007+无铅原装正品，菲律宾产地MUR1660CTG ON TO-22007+无铅原装正品，菲律宾产地MUR3020PTG ON TO-3P07+无铅原装正品，菲律宾产地MUR3040PTG ON TO-3P07+无铅原装正品，菲律宾产地MUR3060PTG ON TO-3P07+无铅原装正品，菲律宾产地MBR1545CTG ON TO-22007+无铅原装正品，菲律宾产地MBR2045CTG ON TO-22007+无铅原装正品，菲律宾产地MBR2545CTG ON TO-22007+无铅原装正品，菲律宾产地MBR20100CTG ON TO-22007+无铅原装正品，菲律宾产地MBR20200CTG ON TO-22006+无铅原装正品，菲律宾产地FQPF2N60C Fairchild TO-22007+无铅原装正品，韩国产地FQPF5N60C Fairchild TO-22007+无铅原装正品，韩国产地FQP5N60C Fairchild TO-22007+无铅原装正品，韩国产地FQPF8N60C Fairchild TO-22007+无铅原装正品，韩国产地FQP8N60C Fairchild TO-22007+无铅原装正品，韩国产地FQPF10N60C Fairchild TO-22007+无铅原装正品，韩国产地FQPF12N60C Fairchild TO-22007+无铅原装正品，韩国产地FQP50N06Fairchild TO-22007+无铅原装正品，韩国产地IRF630A Fairchild TO-22003+有铅原装正品，韩国产地IRF630B Fairchild TO-22006+无铅原装正品，韩国产地IRF634B Fairchild TO-22006+无铅原装正品，韩国产地IRF640B Fairchild TO-22005+有铅原装正品，韩国产地FGA25N120ANTDTU Fairchild TO-3P07+无铅原装正品，韩国产地STP19NB20FP ST TO-220F04+有铅原装正品，摩洛哥产地STW60N10ST TO-3P05+有铅原装正品，摩洛哥产地STTH1602CT ST TO-22007+无铅原装正品，摩洛哥产地STP55NF06ST TO-22007+无铅原装正品，中国产地STP60NF06ST TO-22007+无铅原装正品，摩洛哥产地STP75NF75ST TO-22007+无铅原装正品，中国产地L6561ST DIP-807+无铅原装正品，中国产地L6562ST DIP-807+无铅原装正品，中国产地L6562DTR ST SOP-807+无铅原装正品，中国产地2SC3320SC FUJI TO-3P07+无铅原装正品，菲律宾产地2SC2625-34SC FUJI TO-3P07+无铅原装正品，菲律宾产地ESAD92-02FUJI TO-3P07+无铅原装正品，菲律宾产地2SK2645FUJI TO-220F07+无铅原装正品，菲律宾产地 型 号品牌封装 年份产地IRFS630B FAIRchild TO-220F07+有铅原装正品，韩国产地IRFS640A FAIRchild TO-220F04+有铅原装正品，韩国产地IRF644B FAIRchild TO-22007+无铅原装正品，韩国产地IRF730FAIRchild TO-22004+有铅原装正品，韩国产地IRF740FAIRchild TO-22003+有铅原装正品，韩国产地IRF830FAIRchild TO-22003+有铅原装正品，韩国产地IRF840FAIRchild TO-22003+有铅原装正品，韩国产地MUR2020IR TO-22002+有铅原装正品，墨西哥产地STPS3045CP ST TO-24702+有铅原装正品，摩洛哥产地STPS30L40CW ST TO-24702+有铅原装正品，摩洛哥产地STPS40L40CW ST TO-24702+有铅原装正品，摩洛哥产地STPS40L45CW ST TO-24702+有铅原装正品，摩洛哥产地STPS4045ST TO-24702+有铅原装正品，摩洛哥产地SSS4N60B FAIRchild TO-220F05+无铅原装正品，韩国产地STP4NE60FP ST TO-220F03+有铅原装正品，摩洛哥产地BTA06-600B ST TO-22007+无铅原装正品，摩洛哥产地 BTA08-600B ST TO-22007+无铅原装正品，摩洛哥产地BTA12-600B ST TO-22007+无铅原装正品，摩洛哥产地BTA16-600B ST TO-22007+无铅原装正品，摩洛哥产地BTA26-600B ST TO-22007+无铅原装正品，菲律宾产地BTA41-600B ST TO-22007+无铅原装正品，菲律宾产地STTH5R60D ST TO-22004+有铅原装正品，摩洛哥产地BUK474-200A PHILIPS TO-220F02+有铅原装正品，菲律宾产地BYV74W-400PHILIPS TO-3P05+无铅原装正品，菲律宾产地TIP110ST TO-22005+无铅原装正品，摩洛哥产地BYV34-500PHILIPS TO-220F04+有铅原装正品，菲律宾产地PSMN009-100P PHILIPS TO-22004+有铅原装正品，菲律宾产地F20JC10新电元TO-220F05+无铅原装正品，日本产地ER1002FCT PEC TO-220F04+有铅原装正品，台湾产地F5KQ60新电元TO-220F03+有铅原装正品，日本产地K2611TOS TO-3P07+无铅原装正品，泰国产地K2837TOS TO-3P07+无铅原装正品，泰国产地K2698TOS TO-3P07+无铅原装正品，泰国产地K2699TOS TO-3P07+无铅原装正品，泰国产地K2645-01MR FUJI TO-220F07+无铅原装正品，菲律宾产地K2761-01MR FUJI TO-220F07+无铅原装正品，菲律宾产地K787NEC TO-3P05+无铅原装正品，日本产地K790TOS TO-3P05+无铅原装正品，泰国产地K791TOS TO-22005+无铅原装正品，泰国产地K793TOS TO-3P05+无铅原装正品，泰国产地K727-01FUJI TO-3P07+无铅原装正品，菲律宾产地K792TOS TO-220F07+无铅原装正品，泰国产地K851TOS TO-3P07+无铅原装正品，泰国产地K962FUJI TO-3P07+无铅原装正品，日本产地K956FUJI TO-3P07+无铅原装正品，日本产地K955FUJI TO-3P07+无铅原装正品，菲律宾产地K1018FUJI TO-3P07+无铅原装正品，菲律宾产地K1020FUJI TO-3PL07+无铅原装正品，菲律宾产地K1058HIT TO-3P07+无铅J162HIT TO-3P07+无铅K1081-01FUJI TO-3P07+无铅原装正品，菲律宾产地K1082FUJI TO-220F07+无铅原装正品，菲律宾产地K1117TOS TO-220F07+无铅原装正品，泰国产地K1118TOS TO-220F07+无铅原装正品，泰国产地K1119TOS TO-220F07+无铅原装正品，泰国产地K1120TOS TO-3P07+无铅原装正品，泰国产地K1180SAK TO-3P07+无铅K1358TOS TO-3P07+无铅原装正品，泰国产地K1507-01MR FUJI TO-220F07+无铅原装正品，菲律宾产地K1522HIT TO-3PL07+无铅K2545TOS TO-220F07+无铅原装正品，泰国产地K2662TOS TO-220F07+无铅原装正品，泰国产地K2750TOS TO-220F07+无铅原装正品，泰国产地K2746TOS TO-3P07+无铅原装正品，泰国产地K30-GR TOS TO-9207+无铅原装正品，泰国产地K1794HIT TO-3P07+无铅原装正品，菲律宾产地K1940-01FUJI TO-3P07+无铅原装正品，菲律宾产地BT169D PHILIPS TO-9208+无铅原装正品，中国产地BT136-600E PHILIPS TO-22008+无铅原装正品，中国产地BT137-600E PHILIPS TO-22008+无铅原装正品，中国产地BT138-600E PHILIPS TO-22008+无铅原装正品，中国产地BT139-600E PHILIPS TO-22008+无铅原装正品，中国产地BT151-500R PHILIPS TO-22008+无铅原装正品，中国产地BT152-600R PHILIPS TO-22008+无铅原装正品，中国产地BT131-600PHILIPS TO-9208+无铅原装正品，中国产地BT134-600E PHILIPS T0-25108+无铅原装正品，中国产地参数IRF510:100V,540mO,5.6A,43W IRF520N:100V,200mO,9.7A,48W IRF530N:100V,90mO,17A,79W IRF530:100V,160mO,14A,88W IRF540N:100V,44mO,33A,140W IRF540NS:100V,44mO,33A,130WIRL54N:100V,44mO,30A,94W IRF610:200V,1500mO,3.3A,36W IRF620:200V,800mO,5.2A,50W IRF630N:200V,300mO,9.5A,82WIRF630:200V,400mO,9A,74W IRF634:250V,450mO,8.1A,74W IRF640N:200V,150mO,18A,150W IRF640N:200V,150mO,18A,150W IRF640NS:200V,150mO,18A,150W IRF640:200V,180mO,18A,125W IRF644:250V,280mO,14A,125W IRF710:400V,3600mO,2A,36W IRF720:400V,1800mO,3.3A,50W IRF730:400V,1000mO,5.5A,74W IRF730:400V,1000mO,5.5A,74W IRF740:400V,550mO,10A,125W IRF820:500V,3KmO,2.5A,50W IRF830:500V,1500mO,4.5A,74W IRF840:500V,850mO,8A,125W IRF1010E:60V,12mO,81A,170W IRF1310N:100V,36mO,42A,160W IRF1404:40V,4mO,162A,200W IRF1405:55V,5.3mO,160A,310W IRF1405S:55V,5.3mO,131A,200W IRF1407:75V,7.8mO,130A,330W IRF2807:75V,13mO,82A,200W IRF2807S:75V,13mO,82A,230WIRF3205:55V,8mO,98A,150W IRF3315:150V,82mO,21A,94W IRF3415:150V,42mO,43A,200W IRF3710:100V,23mO,57A,200W IRF4905:-55V,20mO,-74A,200W IRF4905S:-55V,20mO,-64A,150W IRF4905:-55V,20mO,-74A,200W IRF5210:-100V,60mO,-40A,200W IRF5210S:-100V,60mO,-40A,200WIRF5305:-55V,60mO,-30A,110W IRFR5305:-55V,65mO,-31A,110W IRF5305S:-55V,60mO,-31A,110WIRF9510:-100V,1200mO,-4A,43W IRF9520:-100V,600mO,-6.8A,60W IRF9530:-100V,300mO,-12A,88W IRF9530N:-100V,200mO,-14A,79W IRF9540:-100V,200mO,-19A,150W IRF9540N:-100V,117mO,-23A,140W IRF9610:-200V,3000mO,-1.8A,20W IRF9630:-200V,800mO,-6.5A.74W IRF9640:-200V,500mO,-11A,125W IRF9640S:-200V,500mO,-11A,125W IRFZ24N:60V,70mO,17A,60WIRLZ24N:60V,60mO,17A,60WIRFZ34N:55V,40mO,26A,56W IRFZ44N:55V,17.5mO,41A,83WIRFZ44R:60V,28mO,50A,150W IRFZ44V:60V,16.5mO,55A,115W IRFZ44Z:55V,13.9mO,51A,90WIRLZ44N:60V,39mO,50A,150W IRFZ46N:55V,16.5mO,46A,88W IRFZ46N:55V,16.5mO,46A,88W IRFZ46Z:55V,13.6mO,51A,82WIRFZ48V:60V,12mO,72A,150WIRFZ48N:55V,14mO,64A,94W IRF9Z24N:-55V,175mO,-12A,45W IRF9Z34N:-55V,100mO,-17A,56W IRFBC30:600V,2200mO,3.6A,74W IRFBC40:600V,1200mO,6.2A,125W IRFBC40:600V,1200mO,6.2A,125W25IRFBE30:800V,3000mO,4.1A,125W IRFBG20:1000V,11000mO,1.4A,54W IRFBG30:1000V,5KmO,3.1A,125W IRFBG30:1000V,5KmO,3.1A,125W参数HFA08TB60:600V,8A,55ns8ETH06:600V,8A,30nsIRFB3207:75V,3.6mO,180A,330W IRFB4212:100V,72.5mO,18A,60W IRFB4310:100V,5.6mO,140A,330WIRFB4410:100V,8mO,96A,250W IRFB4710:100V,14mO,75A,200W IRFB11N50A:500V,520mO,11A,170W IRFB18N50K:500V,260mO,17A,220W IRFB31N20D:200V,82mO,31A,200W IRFB38N20D:200V,54mO,44A,320W IRFB260N:200V,40mO,56A,380WIRFP054N:55V,12mO,72A,130WIRFP064N:55V,8mO,98A,150WIRFP140N:100V,52mO,27A,94WIRFP150:100V,55mO,41A,140W IRFP150N:100V,36mO,39A,140W IRFP240:200V,180mO,20A,150W IRFP250N:200V,75mO,30A,214W IRFP254N:250V,125mO,23A,220W IRFP260N:200V,40mO,49A,300W IRFP260N:200V,40mO,49A,300WIRFP264:250V,75mO,38A,280W IRFP264N:250V,60mO,44A,380W IRFP350:400V,400mO,16A,190W IRFP360:400V,200mO,23A,280W IRFP448:500V,600mO,11A,180W IRFP450:500V,400mO,14A,190W IRFP450:500V,400mO,14A,190W IRFP450LC:500V,400mO,14A,190W IRFP460LC:500V,270mO,20A,280W IRFP460A:500V,270mO,20A,280W IRFP460A:500V,270mO,20A,280W IRFP460:500V,270mO,20A,280W IRFP2907:75V,4.5mO,177A,330W IRFP3710:100V,250mO,51A,180W IRFP9140N:-100V,117mO,-21A,120W IRFP9240:-200V,500mO,-12A,150W IRFP90N20D:200V,23mO,94A,580W IRFPC50:600V,600mO,11A,180W IRFPC60:600V,400mO,16A,280W IRFPE40:800V,2000mO,5.4A,150W IRFPE50:800V,1200mO,7.8A,190W IRFPF50:900V,1600mO,6.7A,190W IRFPG50:1000V,2000mO,6.1A,190W IRFPS37N50A:500V,130mO,36A,446W IRG4PC30F:600V,31A,100WIRG4PC40S:600V,60A,160WIRG4PC40W:600V,40A,160W IRG4BC20UD:600V,13A,60W IRG4BC30KD:600V,28A,100W IRG4BC40U:600V,40A,160W IRG4BC40W:600V,40A,160W IRG4PF50W:900V,51A,200W 40TPS12A:1200V,55AIRLZ24N:60V,60mO,17A,60W参数IRFD110:100V,540mO,1A,1.3WIRFD120:100V,270mO,1.3A,1.3WIRFD220:200V,800mO,0.8A,1.3W IRFD9110:-100V,1200mO,-0.7A,1.3W IRFD9120:-100V,600mO,-1A,1.3W IRFD9220:-200V,1500mO,-0.56A,1.3W IRFR120N:100V,210mO,9.1A,48WIRFR024N:55V,75mO,16A,38WIRFR024N:55V,75mO,16A,38WIRFR220N:200V,600mO,5A,43WIRFR420:500V,3000mO,2.4A,42WIRFR420:500V,3000mO,2.4A,42W IRFR9024N:-55V,0.175mO,-11A,38W IRFR9120N:-100V,480mO,6.6A,40WIRFU120N:100V,210mO,9.1A,48WIRFU220N:200V,600mO,5A,43WIRFU430A:500V,1700mO,5A,110W IRFU9120N:-100V,480mO,-6.5A,39WIRL2203N:30V,7mO,116A,180WIRL2703:30V,40mO,24A,45WIRL3103:30V,12mO,64A,94WIRL3705N:55V,10mO,89A,170WIRL3803:30V,9mO,120A,150W IRLML2402:20V,350mO,1.2A,0.54WIRLML2502:20V,80mO,4.2A,1.3W IRLML2803:30V,400mO,1.2A,0.54W IRLML5103:-30V,1KmO,-0.61A,0.54W IRLML5203:-30V,165mO,-3A,1.25W IRLML6302:-20V,900mO,-0.62A,0.54W IRLML6401:-12V,125mO,-4.3A,1.3W IRLML6402:-20V,135mO,-3.7A,1.3W30CPQ060:60V,30A30CPQ100:100V,30A40CPQ045:45V,40A40CPQ060:60V,40A40CPQ100:100V,40A40CPQ100:100V,40AMBR20100CTK:100V,20AMBR6045WT:45V,60AMUR420:200V,4AMUR460:600V,4AMUR860:600V,8AMUR8100E:1000V,8AMUR1560:600V,15AMUR1620CT:200V,16AMUR1660CT:600V,16AMUR3020PT:200V,30AMUR3040PT:400V,30AMUR3060PT:600V,30AMBR1545CT:45V,15AMBR2045CT:45V,20AMBR2545CT:45V,25AMBR20100CT:100V,20AMBR20200CT:200V,20A FQPF2N60C:600V,4700mO,2A,23W FQPF5N60C:600V,2500mO,4.5A,33W FQP5N60C:600V,2500mO,4.5A,100W FQPF8N60C:600V,1200mO,7.5A,48W FQP8N60C:600V,1200mO,7.5A,147W FQPF10N60C:600V,730mO,9.5A,50W FQPF12N60C:600V,650mO,12A,51WFQP50N06:60V,22mO,50A,120WIRF630A:200V,400mO,9A,72WIRF630B:200V,400mO,9A,72W IRF634B:250V,450mO,8.1A,74W IRF640B:200V,180mO,18A,139WFGA25N120AN:1200V,25A,125W STP19NB20FP:200V,150mO,10A,125W STW60N10:100V,25mO,60A,200WSTTH1602CT:200V,16ASTP55NF06:60V,17mO,50A,110W STP60NF06:60V,14mO,60A,110W STP75NF75:75V,11mO,80A,300W2SC3320:500V,15A,80W2SC2625:450V,10A,80WESAD92-02:200V,20A2SK2645:600V,1200mO,9A,50W参数IRFS630B:200V,400mO,9A.72WIRFS640A:200V,180mO,18A139WIRF644B:250V,280mO,14A,125WIRF730:400V,1000mO,5.5A,74WIRF740:400V,550mO,10A,125WIRF830:500V,1500mO,4.5A,74WIRF840:500V,850mO,8A,125WMUR2020：20A，200VSTPS3045：30A，45VSTPS30L40：30A，40VSTPS40L40：40A，40VSTPS40L45：40A，45VSTPS4045：40A，45VSSS4N60B:4A,600V，2.5Ω，33W STP4NE60FP：4A。

BMW 120i AT技术参数最大功率/ 转速： 115千瓦 / 156匹马力 / 6400 转每分气缸数 / 容积： 4 / 1995毫升最高车速： 213公里 / 小时0 – 100 公里加速时间： 9.2 秒标准配置铝合金轮圈，V式轮辐229，16英寸，7Jx16，205/50 R16，防爆轮胎，布料座椅，带手动换档方式的6档自动变速箱，动态稳定控制系统DSC，包括牵引力控制（DTC），功能，头部安全气囊，双前座正面及侧面安全气囊，浅钛内饰，BMW专业级收音机，附CD播放机，运动型真皮方向盘，报警系统附遥控器，雨量探测器含自动大灯控制，电动玻璃天窗，电动后车窗升降机，警告标志及急救包，吸烟配套，杯座，雾灯，车载电脑，与车身同色外部组件，车轮螺栓锁，未系安全带警告音，高级手动空调，行车自动落锁，“Elektra”布料，金属漆。

Technical dataCylinders / Capacity : 4 / 1995 mlFuel Consumption : 7.6 ltr / 100 kmStandard equipment Light alloy wheel 16'' V spoke 229, Runflat tires, 7Jx16, 205/50 R16,Automatic Transmission with Steptronic, Dynamic Stability Control (DSC), ASC+T function integrated,finishers Titanium light, BMW Professional Radio, Sport Leather Steering Wheel, Alarm system withremote control, Automatic Headlight and Rain Sensor, Glass Sunroof, Warning triangle and first aid kit,lock when driving away,BMW 120i MT技术参数最大功率/ 转速： 115千瓦 / 156匹马力 / 6400 转每分气缸数 / 容积： 4 / 1995毫升最高车速： 215公里 / 小时0 – 100 公里加速时间： 8.6 秒标准配置铝合金轮圈，双轮辐222，16英寸，7Jx 16， 205/55 R16，防爆轮胎，布料座椅，6档手动变速箱，动态稳定控制系统DSC，包括动态牵引力控制（DTC），气囊，双前座正面及侧面安全气囊，浅钛内饰，运动型真皮方向盘，报警系统附遥控器，电动玻璃天窗，行车自动落锁，警告标志及急救包，车轮螺栓锁，与车身同色外部组件，电动后车窗升降机，未系安全带警告音，吸烟配套，杯座，雾灯，高级手动空调，车载电脑，BMW商用级收音机，附CD播放机，“Elektra”布料，金属漆。

06/01/2013松下MD编年史松下MD的历史。

06/01/2013MD作为儿时音乐播放器的终极梦想，曾伴随我们无数个音乐相伴的日日夜夜。

作为音频大厂的松下，也在sony开发出MD系统后，加入这一阵营。

下面这段历史是我在网上收集的文字资料，加上我多年珍藏的图片形成的一个历史总结，希望能勾起MD玩家对于那段美好时光的共鸣。

（部分资料来自本坛，其余网上搜索，不过集众家所长，有的也是转的，无法一一表明出处，总之文字部分基本是网上搜集的汇总。

）在MD 刚萌芽的93-94 年，松下的子公司JVC（胜利）推出了一台可以携带，但是很大很重的MD 录音机，造形像是后来Sony 的MZ-R4ST/R5ST ，是一个编辑台式的设计。

子公司的政治立场好象总是比较不敏感，所以后来松下要放弃DCC 而就MD ，也是JVC 先有动作。

在大约94-95 年的时候JVC 推出了XM-R1 ，是他们第一部MD 随身听。

这台XM-R1 被挂上Panasonic 的牌子，型号变成SL-MR10 ，就是松下第一台MD 随身听。

1.松下SL-MR10(94-95)JVC XM-R1(94-95)请注意啦，这个型号的开头是SL ，不是今天用的SJ 。

SL 最早是代表唱盘的一个开头，后来也囊括了CD 的器材；这是不是也暗示松下当时对MD 的心态，还不是很认真呢？它的线控设计是直接采用Panasonic 录音带随身听的样式，耳机则是当时松下第二高级的RP-HV530/HJ530 。

后来JVC 又出了一台XM-R2，正面备有类似PDA 般，用stylus 点就可以输入曲名的面版，不过松下就没有OEM 这旷世奇才了。

松下的第二项MD 产品是手提的家用音响，细节真的已不可考喽... 之后Panasonic 就好久没有MD 的新闻。

1997 年秋天，是个满火热的季节。

Sony 发表了后来很多人奉为名机的MZ-R50 ，Sharp 也发表了让很多人第一次接触MD 的MD-MS701/702 。

2009 年天津市高考英语试题及答案第 I 卷第一部分：英语知识运用（共两节，满分45 分）第一节：单项填空（共15 小题；每题 1 分，满分15 分）从 A、 B、C、D 四个选项中，选出能够填入空白处的最正确选项。

例： Stand over there ______ you’ll be able to see it better.A. orB. andC. butD. while答案是 B。

1. I ’m trying to break the _______ of getting up too late.A. traditionB. convenienceC. habitD. leisure2.My parents _____ in Hong Kong. They were born there and have never livedanywhere else.A. liveB. livedC. were livingD. will live3. ---- We’re organizing a party next Saturday, and I ’d like you to come. ---- _______! I have another one that day. Thank you just the same.A. Good luckB.What a pityC.Never do it againD.Welldone4. ______ the project in time, the staff were working at weekends.A. CompetingB. Having completedC. To have completedD. To complete5. A person ______ e- mail account is full won’t be able to send or receiveany e-mails.A. whoB. whomC. whoseD. whoever6. ----Sorry, I have to ______ now. It’s time for class.----OK, I ’ll call back later.A. hang upB. break upC. give upD. hold up7. It is obvious to the students ______ they should get well prepared fortheir future.A. asB. whichC. whetherD. that8.Don ’t worry if you don’t understand teacher will ______ the mainpoints at the end.A. recoverB. reviewC. requireD. remember9. _____ by the advances in technology, manyfarmers have set up wind farmson their land.A. Being encouragedB. EncouragingC. EncouragedD. Having encouraged10. The art show was _______ being a failure; it was a great success.A. far fromB.along withC. next toD. regardless of11.---- Putting on a happy face not only helps us make friends butalso makes us feel better.----_______.A. I ’d love toB. I ’m with you on thatC. It ’s upto you D. It ’s my pleasure12. It was a nice house, but _______ too small for a family of live.13.I ’m not surprised that he became a writer. Even as a child he hada _____ imagination.14. I travel to the Binhai New Area by light railway every day, _____ domany businessmen who live in downtown Tianjin.15.This printer is of good quality. If it _______ break down within thefirst year, we would repair it at our expense.A. wouldB. shouldC. couldD. might第二节：完形填空（共 20 小题；每题分，满分30 分）阅读下边短文，掌握其粗心，而后从16-35 各题所给的 A、B、C、D四个选项中，选出最正确选项。

a09n03n场效应管参数A09N03N场效应管参数场效应管是一种常用的电子元件，具有很多种类和型号。

本文将重点介绍A09N03N场效应管的参数特性及其应用。

一、参数特性1. 额定参数A09N03N场效应管的额定参数包括最大漏源电压（VDS）、最大漏源电流（ID）和最大功耗（PD）。

这些参数定义了场效应管在正常工作条件下的最大电压、电流和功率。

2. 阈值电压（Vth）阈值电压是指当场效应管的栅极电压达到一定值时，漏源电流开始显著增加的电压。

A09N03N场效应管的阈值电压一般为2-4V，不同型号的场效应管具有不同的阈值电压。

3. 静态工作点静态工作点是指场效应管在直流电路中的工作状态，通常由栅极电压（VGS）和漏源电流（ID）确定。

静态工作点的选择对于电路的性能和稳定性非常重要。

4. 开关特性A09N03N场效应管具有优良的开关特性，能够在较低的栅极电压下实现漏源电流的开关控制。

这使得场效应管在数字电路和功率控制电路中得到广泛应用。

二、应用领域1. 电源管理A09N03N场效应管在电源管理电路中扮演重要角色，用于电压稳压、电流控制和功率开关等功能。

通过控制场效应管的导通和截止状态，可以实现对电路的高效能量管理。

2. 电机驱动场效应管在电机驱动电路中广泛应用，能够实现对电机的精确控制。

A09N03N场效应管具有低导通电阻和快速开关速度，适用于高效率和高精度的电机控制。

3. 信号放大场效应管具有较高的输入阻抗和较低的输出阻抗，能够实现对信号的放大和驱动。

A09N03N场效应管的参数特性使其在音频放大、射频放大和功率放大等应用中具有良好的性能。

4. 光电耦合场效应管与光电耦合器结合使用，能够实现光电信号的放大和隔离。

这种应用广泛用于光电耦合器的输出级驱动和信号隔离等领域。

总结A09N03N场效应管是一种性能优良的电子元件，具有多种参数特性和广泛的应用领域。

了解和掌握场效应管的参数特性，能够更好地应用于电路设计和电子系统的开发。

HP 2009fBrighview超亮屏技术响应时间3 ms 分辨率1600*900亮度300 nits 对比度(典型值)1000:1 动态对比度(典型值)3000:1色域72%接口VGA and DVI 水平视角（典型值）160 度 (典型值)垂直视角（典型值）160 度 (典型值)屏幕垂直旋转无前后倾斜-5 到 +25 度底座旋转支持Height Adjustable 支持支持 HDCP支持 HDCP摄像头无服务3-3-1price1200无5ms 1366 * 768VGA 900无无无1-1-1Compaq Presario Q1859无160 度 (典型值)160 度 (典型值)无250 nits -5 到 +25 度1000:1无72%Compaq Presario Q2159HP 2309pCompaq Presario Q2009(For Rural PC)无Brighview 超亮屏技术无5ms3ms 5 ms 1920*10801920*10801600*900 300 nits300 nits300 nits 1000:1 1000:1 1000:1 无3000:1无72%72%72%VGAVGA , DVI and HDMI VGA160 度 (典型值)160 度 (典型值)160 度 (典型值) 160 度 (典型值)160 度 (典型值)160 度 (典型值)无支持无-5 到 +25 度支持-5 到 +25 度无支持无无支持无无支持 HDCP无无无无1-1-13-3-11-1-1120017001100HP 2159m Compaq Presariow185q(For Rural PC)Brighview 超亮屏技术无3 ms5ms1920*10801366 * 768300 nits200 nits1000:1 600 : 13000:1无72%57%VGA , DVI and HDMIVGA and DVI 160 度 (典型值)45度左/45度右160 度 (典型值)15度上/35度下无无-5 到 +25 度-5 到 +20 度支持无支持无支持 HDCP无无无3-3-11-1-11399900。

Debug with Confidence200 MHz – 500 MHzTeledyne Test Tools T3AFG200 / T3AFG350 / T3AFG500 range of function/arbitrary generators are a series of dual-channel waveform generators with specifications of up to 500 MHz maximum bandwidth, 2.4 GSa/s maximum sampling rate and 16-bit vertical resolution. The proprietary Arbitrary & Pulse techniques used in the T3AFG200 / T3AFG350 / T3AFG500 models helps to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms. With the above advantages the T3AFG200 / T3AFG350 / T3AFG500 generators can provide users with a variety of high fidelity and low jitter signals, which can meet the growing requirements of a wide range of complex applications.Tools for Improved Debugging●Deep Memory – 20 Mpts/Ch. G enerate complex arbitrary waveforms.●Wide Range of Modulation Types – AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst, and PSK. Q uickly set up modulated waveforms.●High Resolution – 16 bit resolution. G enerate waveforms with low noise, low spurious signal content and high dynamic range. ●Bandwidth Models up to 500 MHz. W ide choice of bandwidths.●Built In Arbitrary Waveforms. L oad and replay built in Arbitrary Waveforms. ●PRBS, I/Q and user Defined Waveform capability. S upport for complex applications.●Single and dual channel models also available, starting from 5 MHz. I nquire about the T3AFG5, T3AFG10, T3AFG40, T3AFG80 and T3AFG120.Key Specifications2FunctionT3AFG200, T3AFG350, T3AFG500Excellent Performance●Bandwidths from 200 MHz to 500 MHz ●All Models have 2 Channels ●20 Mpts/Channel memoryGreat Connectivity●USB host port for mass storage ●USB device port (USBTMC) ●LAN port on 2 channel modelsThe rise/fall times can be set independently to a minimum of 1 ns (2 ns on T3AFG200) at any frequency and to a maximum of 75 s.The T3AFG range of Function/Arbitrary Waveform Generators support a wide range of modulation types including AM, FM, PM, FSK, ASK, PSK, PWM and DSB-AM.Burst mode supports ‘N Cycle’ and ‘Gated’ modes with the Burst source being configured as ‘Internal’, ‘External’ or ‘Manual’.Output amplitude into a high impedance load can be as high 20 Vpp depending on frequencyand waveform type.Ordering Information3Smart Capabilities●Sweep output carrier can be Sine, Square, Ramp and Arbitrary waveforms. Linear or Log sweep. ●Burst output under internal or external signal control ●Waveforms types include PRBS (PRBS3 – PRBS32) ●Frequency Resolution 1 µHz●DSB-AM: Double Sideband AM modulation Function ●10 Order Harmonic Function ●Optional IQ Modulation (T3AFG-IQ)●Multi-Language User InterfaceThe counter functionality, accessed via the rear panel BNC, gives a DC or AC coupled counter capability from 100 mHz to 400 MHz.The Teledyne Test Tools T3AFG200, T3AFG350 and T3AFG500, with its low jitter design, can generate waveforms with exceptional edge stability. With better jitter performance comes better edge stability, and higher confidence in your circuit design.Sweep mode supports ‘Linear’ and ‘Log’ sweep, with ‘Up’ and ‘Down’ direction, and Sweep sourcecan be configured as ‘Internal’, ‘External’ or ‘Manual’.High Fidelity output with 80 dB dynamic range. Sine wave non-harmonic spurious artifacts are-60 dBc ≤ 350 MHz and -55 dBc > 350 MHz.4Gaussian noise with adjustable bandwidth up to 500 MHz, depending on model. Wide bandwidth Gaussian noise can be added to other waveforms to simulate real-world scenarios in which the signal contains a large degree ofnoise.The T3AFG200, T3AFG350 and T3AFG500 optionally supports IQ signal generation with symbol rates between 250 Symbols/s to 37.5 MSymbols/s, providing ASK, PSK, QAM, FSK, MSK and multi-tone signals.The built-in quadrature modulator provides the possibility to generate IQ signals from baseband to 500 MHz intermediate frequency (depending on T3AFG model).The EasyIQ software is necessary to generate an IQ waveform when using the T3AFG-IQ option.The EasyIQ software is a PC program used to download IQ baseband waveform data to the T3AFG200, T3AFG350 or T3AFG500 through a USB or LAN device interface.T3AFG-IQ, Optional IQ Signal GenerationPhase Locked Operation ModeThe ‘Phase-Locked’ mode automatically aligns the phases of each output. While ‘Independent’ mode permits the two output channels to be used as twoindependent waveform generators.5The T3AFG200, T3AFG350 and T3AFG500 havewaveform combining capability whereby Channel 1 and Channel 2 can be combined to a user selected output. The combined waveform can be output on both Ch 1 and Ch 2 simultaneously, or just on a single output,Waveform CombiningCh 1 or Ch 2, whilst the other channel outputs the un-combined waveform for that channel. Easily combine basic waveforms (sine, square, ramp, pulse, etc), random noise, modulation signals, burst signals and Arb waveforms.The harmonics function gives the user the ability to add higher-order elements to the signal being generated.Harmonic FunctionThe PRBS capability gives the flexibility to generate PRBS waveforms from PRBS3 to PRBS32 at up to 300 Mbps with edge rates from 1 ns to 1 µs. An added differential mode provides an easy way to generatePRBSdifferential PRBS signals using both output channels. Easily set outputs to common logic levels such as TTL, ECL, LVCMOS, LVPECL and LVDS using built-inpresets.616 Bit Resolution●T3AFG200 / T3AFG350 / T3AFG500 are all16 bit resolution●4 x higher resolution than 14 bit systems ●Lower levels of Harmonic Distortion●Lower levels of non-harmonic spurious signals ●Improved dynamic range ●Enhanced signal fi delityI/O Connectivity●LAN and USB connection●10 MHz Reference Input and Output●The Aux Input/Output BNC Connector supports the Trigger Input, Trigger/Sync Output,external modulation input, external sweep/burst trigger input and external gate input ●External Counter input14 Bit Resolution 16 Bit Resolution14 Bit ResolutionLess accurate w aveform generation78910Ordering information11© 2020 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders.T3 stands for Teledyne Test Company ProfileTeledyne LeCroy is a leading provider of oscilloscopes, protocolanalyzers and related test and measurement solutions thatenable companies across a wide range of industries to designand test electronic devices of all types. Since our foundingin 1964, we have focused on creating products that improveproductivity by helping engineers resolve design issuesfaster and more effectively. Oscilloscopes are tools used bydesigners and engineers to measure and analyze complexelectronic signals in order to develop high-performancesystems and to validate electronic designs in order to improvetime to market.The Teledyne Test Tools brand extends the Teledyne LeCroyproduct portfolio with a comprehensive range of testequipment solutions. This new range of products deliversa broad range of quality test solutions that enable engineersto rapidly validate product and design and reduce time-to-market. Designers, engineers and educators rely on TeledyneTest Tools solutions to meet their most challenging needs fortesting, education and electronics validation.Location and Facilities Headquartered in Chestnut Ridge, New York, TeledyneTest Tools and Teledyne LeCroy has sales, service anddevelopment subsidiaries in the US and throughoutEurope and Asia. Teledyne Test Tools and Teledyne LeCroyproducts are employed across a wide variety of industries,including semiconductor, computer, consumer electronics,education, military/aerospace, automotive/industrial, andtelecommunications.Teledyne LeCroy (US Headquarters)700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Phone: 800-553-2769 or 845-425-2000Fax Sales: 845-578-5985Phone Support: 1-800-553-2769Email Sales: *******************************Email Support: ************************** Web Site: /Teledyne LeCroy (European Headquarters)Teledyne LeCroy GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: +49 6221 82700Fax: +49 6221 834655Phone Service: +49 6221 8270 85Phone Support: +49 6221 8270 28 Email Sales: *******************************Email Service: *******************************Email Support: t ********************************Web Site: /germanyWorld wide support contacts can be found at:https:///support/contact/#Distributed by:24july20。

日产骊威2009说明书一、车辆介绍日产骊威是一款由日本汽车制造商日产公司生产的小型多功能车型，于2009年推出。

该车型外观简洁大方，车身线条流畅，具有较高的辨识度，是一款非常受消费者喜爱的车型。

二、车辆外观骊威2009采用了时尚的外观设计，车身长宽高分别为4250mm、1695mm、1595mm，轴距为2490mm。

车头设计动感，前脸造型犀利，大灯组采用了卤素光源，提供良好的照明效果。

车身侧面线条简洁流畅，造型动感，车尾部分采用了时尚的设计元素，增加了整车的运动感。

三、车辆内饰骊威2009的内饰采用了简洁实用的设计风格，车内空间宽敞舒适。

座椅采用高质量材料制成，提供了良好的支撑力和舒适性。

仪表盘采用了直观简洁的设计，各种功能按钮布局合理，易于操作。

中控台布局合理，各种功能配置齐全，提供了良好的驾驶体验。

四、动力系统骊威2009搭载了一台1.6升直列四缸发动机，最大功率为82千瓦，最大扭矩为153牛·米。

发动机采用了双顶置凸轮轴结构，提供了较高的燃烧效率和动力输出。

传动系统方面，车型配备了5速手动变速器和4速自动变速器可选，以满足不同消费者的需求。

五、安全配置骊威2009在安全配置方面表现出色。

车型配备了ABS防抱死制动系统、EBD制动力分配系统和刹车辅助系统，提供了良好的制动性能。

此外，车型还配备了驾驶员和副驾驶座椅的正面、侧面和安全气帘等多重安全气囊，提供了全方位的安全保护。

六、驾驶性能骊威2009的悬挂系统采用了前麦弗逊式独立悬挂和后扭力梁非独立悬挂，提供了较好的操控性和驾驶稳定性。

车辆配备了电动助力转向系统，提供了轻盈的转向感觉。

此外，车型还配备了ESP车身稳定控制系统和牵引力控制系统，提供了更高的行驶安全性。

七、舒适配置骊威2009在舒适配置方面表现出色。

车型配备了空调系统，提供了良好的空调效果。

此外，车辆还配备了音响系统、导航系统和倒车雷达等功能配置，提供了更加便利的驾驶体验。

__________________________________________________________________________________________________________________________________________SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright © 2009 SAE InternationalAll rights reserved. N o part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerService@ SAE WEB ADDRESS: h ttp://Issued Revised 2009-03 Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall WidthRATIONALE• Photometric tables were removed and Figure1 and Figure 2 added. • Section 2.2.2 revised. • Section 6.1.5.1 revised. •Section 6.5.1 revised.1. SCOPEThis SAE Standard provides test procedures, requirements, and guidelines for sidemarker lamps for vehicles less than2032 mm in overall width. 2. REFEREN CES2.1 Applicable PublicationsThe following publications form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply. 2.1.1 SAE PublicationsAvailable from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), .SAE J567 Lamp Bulb Retention SystemSAE J575 Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than2032 mm in Overall WidthSAE J576 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices SAE J578 Color Specification SAE J759Lighting Identification Code--``,```,``,```,,,,`,,````,`,,`,-`-`,,`,,`,`,,`---SAE J1889 L.E.D. Signal and Marking Lighting DevicesSAE J2042 Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall WidthSAE J2139 Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width2.2 Related PublicationsThe following publications are provided for information purposes only and are not a required part of this document.Publications2.2.1 SAEAvailable from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), .SAE J387 Terminology—Motor Vehicle LightingPublications2.2.2 FederalAvailable from the Superintendent of Documents, U. S. Government Printing Office, Mail Stop: SSOP, Washington, DC 20402-9320,/cfr/index/html.CFR Title 49 Part 571.108 Lamps, Reflective Devices and Associated Equipment (FMVSS108)3. DEFIN ITION S3.1 Sidemarker LampsLighting devices used to indicate the presence and length of the vehicle when viewed from the side.4. LIGHTING IDENTIFICATION CODESidemarker lamps which meet the requirements of this document may be identified by the code “P2” in accordance with SAE J759.5. TESTS5.1 SAE J575 and SAE J1889 are a part of this document. The following tests are applicable with the modifications asindicated. Alternatively, sidemarker lamps may be tested according to SAE J2139.5.1.1 Vibration5.1.2 Moisture5.1.3 Dust5.1.4 Corrosion5.1.5 Photometry5.1.5.1 The photometric tests shall be made at a distance of at least 3 m between the lighting device and thephotometer.5.1.5.2 The H-V axis of a sidemarker lamp in a position as it will be mounted on a vehicle shall be taken asperpendicular to a vertical plane passing through the longitudinal axis of the vehicle.--``,```,``,```,,,,`,,````,`,,`,-`-`,,`,,`,`,,`---5.1.6 Warpage5.2 ColorSAE J578 is a part of this document.5.3 Plastic MaterialsSAE J576 is part of this document.6. REQUIREMEN TS6.1 Performance RequirementsThe device when tested in accordance with the test procedures of this document shall meet the requirements of SAE J575 and, if applicable, SAE J1889. Alternatively, if tested according to SAE J2139, sidemarker lamps shall meet the requirements of SAE J2139.NOTE: Sidemarkers conforming to requirements of SAE J2042 meet requirements of SAE J592.6.1.1 Vibration6.1.2 Moisture6.1.3 Dust6.1.4 Corrosion6.1.5 Photometry6.1.5.1 The lamp shall be designed to conform to the zone total photometric requirements of Figures 1 and 2. Thesummation of the luminous intensity measurements at the test points in a zone shall be at least the value shown.6.1.5.2 The inboard angle requirements for sidemarkers may be met alternatively for inboard test points at a distanceof 4.6 m from the vehicle on a vertical plane that is perpendicular to the longitudinal axis of the vehicle and located midway between the front and rear sidemarker lamps.6.1.6 Warpage6.2 Color6.2.1 The color of light from front and intermediate sidemarker lamps shall be yellow per SAE J578.6.2.2 The color of light from rear sidemarker lamps shall be red per SAE J578.6.3 Plastic Materials RequirementsPlastic materials used in optical parts shall meet the requirements of SAE J576.--``,```,``,```,,,,`,,````,`,,`,-`-`,,`,,`,`,,`---Minimum Luminous Intensity (cd)FIGURE 2 - PHOTOMETRIC REQUIREMENTS (YELLOW)Minimum Luminous Intensity (cd)--``,```,``,```,,,,`,,````,`,,`,-`-`,,`,,`,`,,`---6.4 Design Requirements6.4.1 A sidemarker lamp may be an independent lamp or grouped, combined, or reciprocally incorporated with anyother lamp or reflective device if the requirements for sidemarker lamp and the associated equipment are met. 6.4.2 If a sidemarker lamp is reciprocally incorporated or combined with a turn signal lamp or a stop lamp and areplaceable multiple (e.g., two filament) light source is used, the light source retention system shall be designed with an indexing feature in order to insure that the light source without such indexing feature cannot be used. Removable light source retention systems (sockets) shall have an indexing feature so that they cannot be reinserted into lamp housings in random positions, unless the lamp will perform its intended function with random light source orientation. 6.5 Installation Requirements 6.5.1 As installed on the vehicle, with all vehicular obstructions considered, sidemarker lamps, shall meet photometricrequirements of Figures 1 and 2.6.5.2 Sidemarker lamps shall be mounted on the permanent structure of the vehicle not less than 380 mm above the road surface measured from the center of the device at the vehicle curb weight.6.5.3 Sidemarker lamps shall be mounted as near as practicable to the front and rear edges of the vehicles to indicate the overall length of the vehicle.6.5.4Intermediate yellow sidemarker lamps shall be mounted near the midpoint on vehicles 7.6 m or more in overall length.7. GUIDELIN ES7.1 Installation GuidelinesThe following guidelines apply to sidemarker lamps as used on the vehicle and shall not be considered part of the requirements.7.1.1 The luminous intensity of a lighting device may vary with applied voltage. The electrical wiring in the vehicleshould be adequate to supply design voltage to the light source of a lighting device. 7.1.2 Performance of lighting device may deteriorate significantly as a result of dirt, grime, ice, and/or snowaccumulation on its optical surfaces. Installation of a device on a vehicle should be considered to minimize the effect of these factors. 7.1.3Where it is expected that lighting device must perform in extremely severe environments, such as in off- highway, mining, fuel haulage, or where it is expected that they will be totally immersed in water, the user should specify lamps specifically designed for such use. 7.2Socket Design GuidelineFor requirements and gages to be used in socket design, refer to SAE J567.--``,```,``,```,,,,`,,````,`,,`,-`-`,,`,,`,`,,`---8. N OTES8.1 Marginal IndiciaA change bar (l) located in the left margin is for the convenience of the user in locating areas where technical revisions, not editorial changes, have been made to the previous issue of this document. An (R) symbol to the left of the document title indicates a complete revision of the document, including technical revisions. Change bars and (R) are not used in original publications, or in documents that contain editorial changes only.PREPARED BY THE SAE SIGNAL AND MARKING DEVICES SUBCOMMITTEEOF THE SAE LIGHTING COMMITTEE--``,```,``,```,,,,`,,````,`,,`,-`-`,,`,,`,`,,`---。

TDA2009高保真BTL放大器来源:3721电子网作者:电路概述:这里介绍一种无需调试、保真度高、成本低廉的BTL功率放大电路，并且可以根据自己的情况选取末级功放集成电路，由于通用性强，给音响爱好者制作带来极大方便。

工作原理:该装置电路工作原理见图1。

这里只给出了其中一个通道的电路图，另一个通道完全相同。

音频信号从电路的A端输入，经运算放大器IC1放大后（放大倍数由R1、R2决定），一路经IC2作反相放大，其增益为1；另一路经IC3、IC4作两次反相放大，增益仍然为1，其实质是IC3、IC4共同构成增益为1的正相放大器，所以在IC2的B端和IC4的C端得到的是两个大相等而相位相反的音频信号。

这两个互为反相的音频信号分别通过R9、C5和R10、C6加到双音频功率放大集成电路IC5（TDA2009）的①和⑤脚端，这两个输入端是同相输入和反相输入端，因此在IC5的内部进行功率放大后，分别从IC5的⑩脚和⑧脚输出，推动扬声器BL。

元器件选择及调试:IC1－IC4可以用一块四运放集成电路TL084，差分放大器的频响宽、噪声低、瞬态指标高。

功率集成放大器除了采用TDA2009以外，亦可选用其它同类集成电路，不作特别要求。

所用电阻全部采用低噪声、精密型金属膜电阻器，其目的是降低前置级噪声，同时应使得B、C两点的信号幅度相等，所用的前置级耦合电容器也应采用精密型钽电容。

三极管VT的功率应视电路所需电流而定，并有足够的容量储备以期获得良好的瞬态特性和足够的动态范围。

由于本电路设计的通用性，因此，任何OTL或OCL输出的双功率放大集成电路，都可以与差放放大器的B、C两端驳接，从而构成BTL放大器。

读者如果有兴趣的话，还可以插入RC衰减式音调控制电路，将会收到更好的效果。

2009年普通高等学校招生全国统一考试（江苏卷）英语第一部分：听力（共两节，满分20分）做题时，先将答案标在试卷上。

录音内容结束后，你将有两分钟的时间将试卷上的答案转涂到答题卡上。

第一节（共5小题；每小题1分，满分5分）听下面5段对话。

每段对话后有一个小题，从题中所给的A、B、C三个选项中选出最佳选项，并标在试卷的相应位置。

听完每段对话后，你都有10秒钟的时间来回答有关小题和阅读下一小题。

每段对话仅读一遍。

例：How much is the shirt?A. ￡19.15.B. ￡9.15.C. ￡9.18.答案是B。

1. What do the speakers need to buy?A. A fridge.B. A dinner table.C. A few chairs.2. Where are the speakers?A. In a restaurant.B. In a hotel.C. In a school.3. What does the woman mean?A. Cathy will be at the party.B. Cathy is too busy to come.C. Cathy is going to be invited.4. Why does the woman plan to go to town?A. To pay her bills in the bank.B. To buy books in a bookstore.C. To get some money from the bank.5. What is the woman trying to do?A. Finish some writing.B. Print an article.C. Find a newspaper.第二节（共15小题；每小题1分，满分15分）听下面5段对话。

每段对话后有几个小题，从题中所给的A、B、C三个选项中选出最佳选项，并标在试卷的相应位置。

2009年参考价目表 - 塑壳断路器(S型) Isomax S3 塑壳断路器(S型) - 抽出式移动部分
Isomax S5 塑壳断路器(S型) - 抽出式移动部分
Isomax S3 塑壳断路器(S型) - 抽出式移动部分
2009年参考价目表 - 塑壳断路器(S型)
2009年参考价目表 - 塑壳断路器(S型)
S6 塑壳断路器(S型) - 抽出式抽出部份
S7 塑壳断路器(S型) - 抽出式
2009年参考价目表 - 塑壳断路器(S型)
S3X 塑壳断路器(S型) - 插入式抽出部份
S4X 塑壳断路器(S型) - 插入式抽出部份
S3X 塑壳断路器(S型) - 抽出式抽出部份
S4X 塑壳断路器(S型) - 抽出式抽出部份
S6X 塑壳断路器(S型) - 抽出式抽出部份
2009年参考价目表 - 塑壳断路器(S型)
S2X 塑壳断路器(S型) - 插入式抽出部份
2009年参考价目表 - 塑壳断路器(S型)。

NBOG’s Best Practice Guideapplicable for ⌧ AIMD, ⌧ MDD, and ⌧ IVDD 2009-3 Guideline for Designating Authorities to Define the Notification Scope of a Notified Body Conducting Medical Devices Assessments1 IntroductionNANDO [1], published and maintained by the European Commission, is an electronic register that enables interested parties to consult regulatory information of Notified Bodies (NBs). The NANDO register contains scope information of Notified Bodies under the New Approach Directives. Up to now the information provided by Member States is not precise enough to allow the comparisons necessary to promote a free competition between Notified Bodies in the medical devises area.In particular in the medical devices sector, identical designation information appears in the register in a broad variation between NBs. Different Designating Authorities (DAs) use different expressions when they sign up for designation of their NBs. In some Member States (MS) the DAs submit the designation information, the so-called scope, by just take reference to one of the medical devices directives. Other MS try to define and submit a detailed scope according to the existing and monitored competence of their NBs. This can end up in very exhaustive information per directive and NB.The NANDO information provided to interested users like manufacturers, Designating Authorities and Authorities responsible for market surveillance, required an improvement. For Designating Authorities, this guideline aims to describe medical devices scope expressions for Notified Bodies in a comparable and harmonized way.2 Scope of the documentThis guideline provides scope expressions, describing activities of NBs to demonstrate medical devices competence for their notification in the NANDO register. The expressions are defined per directives for DAs to achieve harmonized listings of NBs skills. In addition application for modifications can be submitted in a uniformed way to the European Commission responsible for maintenance the NANDO register.This document is applicable to products according to Directive 93/42/EEC (MDD) concerning medical devices, Directive 90/385 (AIMDD) concerning active implantable medical devices and Directive 98/79/EC (IVDMDD) on in vitro diagnostic medical devices.3 Concept for defining scope expressionsWith this document a collection of existing relevant medical device information has been considered. This guideline takes reference to:– NANDO register [1]– The three main medical devices directives (MDD, AIMDD, IVDMDD)– All modifying or implementing directives to the three main directives– CEN Technical report CEN/TR 15133 : 2005 "Nomenclature – Collective terms and codes for groups of medical devices" [2]– The Designating Authorities Handbook [3]As explained in the Guide to Using [4], the NANDO register contains three levels of information per Directive. With one exception (89/106/EEC) this is handled in the same way for all NBs in all Directives, including the medical devices sector.The list of the register with the description of the tasks performed for one NB and one Directive contains three columns, reflecting the three different levels. They are named “Product families”, “Procedures” and “Articles/Annexes”. Whereas for the level of the “Product families” neither a structure nor a specific wording exists, the information for the two other levels is well defined. This limits automatically any kind of harmonization to the Level of “Product families”. Due to the fact that the NANDO structure should not be modified for individual Directives, particular attention was given to an understandable wording with an adjusted structure of scope expressions.Scope expressions as they are recorded in the NANDO list have to correspond evidently with the competence of a NB. This competence shall be assessed, by taking reference to the DA Handbook [3].At the end a clear statement with regard to the scope of the designation of a NB should be given. This can best be described with the listings in sections 3.1 to 3.6.3.1 Medical devices, non-active, 93/42/EECC ODE MD SCOPE EXPRESSIONS, NON-ACTIVE MEDICAL DEVICESMD 0100 General non-active, non-implantable medical devicesMD 0101 Non-active devices for anaesthesia, emergency and intensive careMD 0102 Non-active devices for injection, infusion, transfusion and dialysisMD 0103 Non-active orthopaedic and rehabilitation devicesMD 0104 Non-active medical devices with measuring functionMD 0105 Non-active ophthalmologic devicesMD 0106 Non-active instrumentsMD 0107 Contraceptive medical devicesMD 0108 Non-active medical devices for disinfecting, cleaning, rinsingMD 0109 Non-active devices for in vitro fertilisation (IVF) and a ssisted r eproductive t echnologies (ART)MD 0200 Non-active implantsMD 0201 Non-active cardiovascular implantsMD 0202 Non-active orthopaedic implantsMD 0203 Non-active functional implantsMD 0204 Non-active soft tissue implantsMD 0300 Devices for wound careMD 0301 Bandages and wound dressingsMD 0302 Suture material and clampsMD 0303 Other medical devices for wound careMD 0400 Non-active dental devices and accessoriesMD 0401 Non-active dental equipment and instrumentsMD 0402 Dental materialsMD 0403 Dental implants3.2 Medical devices, active, 93/42/EECC ODE MD SCOPE EXPRESSIONS, ACTIVE (NON-IMPLANTABLE) MEDICAL DEVICES MD 1100 General active medical devicesMD 1101 Devices for extra-corporal circulation, infusion and haemopheresisMD 1102 Respiratory devices, devices including hyperbaric chambers for oxygen therapy, inhalation anaesthesiaMD 1103 Devices for stimulation or inhibitionMD 1104 Active surgical devicesMD 1105 Active ophthalmologic devicesMD 1106 Active dental devicesMD 1107 Active devices for disinfection and sterilisationMD 1108 Active rehabilitation devices and active prosthesesMD 1109 Active devices for patient positioning and transportMD 1110 Active devices for in vitro fertilisation (IVF) and a ssisted r eproductive t echnologies (ART)MD 1111 SoftwareMD 1200 Devices for imagingMD 1201 Imaging devices utilising ionizing radiationMD 1202 Imaging devices utilising non-ionizing radiationMD 1300 Monitoring devicesMD 1301 Monitoring devices of non-vital physiological parametersMD 1302 Monitoring devices of vital physiological parametersMD 1400 Devices for radiation therapy and thermo therapyMD 1401 Devices utilising ionizing radiationMD 1402 Devices utilising non-ionizing radiationMD 1403 Devices for hyperthermia / hypothermiaMD 1404 Devices for (extracorporal) shock-wave therapy (lithotripsy)3.3 Active implantable medical devices, 90/385/EECC ODE AIMD SCOPE EXPRESSIONSAIMD 0100 General active implantable medical devicesAIMD 0101 Active implantable medical devices for stimulation / inhibitionAIMD 0102 Active implantable medical devices delivering drugs or other substances AIMD 0103 Active implantable medical devices substituting or replacing organ functions3.4 In vitro diagnostic medical devices, 98/79/ECC ODE IVD SCOPE EXPRESSIONSIVD 0100 List AReagents and reagent products, including related calibrators and controlmaterials, for determining the following blood groupsIVD 0101 AB0 systemIVD 0102 Rhesus (C, c, D, E, e)IVD 0103 A nti-KellIVD 0200 List AReagents and reagent products, including related calibrators and controlmaterials, for the detection, confirmation and quantification in humanspecimens of markers ofIVD 0201 HIV infection (HIV 1 and 2)IVD 0202 HTLV I and IIIVD 0203 Hepatitis B, C and DIVD 0300 List BReagents, reagent products and devices for self - diagnosis, including relatedcalibrators and control materials, for determining, detection, quantification,diagnosing, evaluatingIVD 0301 Anti-Duffy and anti-KiddIVD 0302 Irregular anti-erythrocytic antibodiesIVD 0303 Congenital infections: rubella, toxoplasmosisIVD 0304 Hereditary disease: phenylketonuriaIVD 0305 Human infections: cytomegalovirus, chlamydiaIVD 0306 HLA tissue groups: DR, A, BIVD 0307 Tumoral marker: PSAIVD 0308 Risk of trisomy 21 (incl. software)IVD 0309 Device for self-diagnosis: device for the measurement of blood sugarIVD 0400 Devices for self-testingIVD 0401 Clinical chemistryIVD 0402 HaematologyIVD 0403 ImmunologyIVD 0404 Molecular biologyIVD 0405 Pregnancy and ovulationIVD 0406 Specimen receptacles3.5 Specifics of medical devices and active medical devices, 93/42/EEC, 90/385/EECC ODE MD AND AIMD SCOPE EXPRESSIONS, ADDITIONSMDS 7000 MD / AIMD SpecificsMDS 7001 Medical devices incorporating medicinal substances, according to Directive 2001/83/ECMDS 7002 Medical devices utilising tissues of animal origin, including Directive2003/32/ECMDS 7003 Medical devices incorporating derivates of human blood, according to Directive 2000/70/EC, amended by Directive 2001/104/ECMDS 7004 Medical devices referencing the Directive 2006/42/EC on machineryMDS 7005 Medical devices referencing the Directive 89/686/EEC on personal protective equipment (PPE)MDS 7006 Medical devices in sterile conditionMDS 7007 Medical devices utilising micromechanicsMDS 7008 Medical devices utilising nanomaterialsMDS 7009 Medical devices utilising biological active coatings and/or materials or being wholly or mainly absorbed3.6 Specifics of in vitro diagnostic medical devices, 98/79/EC (IVDs)C ODE IVD SCOPE EXPRESSIONS, ADDITIONSMDS 7200 IVD SpecificsMDS 7206 IVDs in sterile conditionMDS 7207 IVDs utilising micromechanicsMDS 7208 IVDs utilising nanomaterialsMDS 7209 IVDs utilising biological active coating and/or materialMDS 7210 IVDs utilising material of human originAny change of or addition to the scope expressions is subject to NBOG endorsement.The scope expressions consider different requirements of different directives, technologies, use of the devices and the risks associated with the devices. With such a demand there is strong requirement for a clear understanding of the content of each expression. To minimize definitiondiscussions and to take in consideration the helpful development of the Technical Committee CEN/TC 257, this guidance uses the collective terms of the technical report CEN/TR 15133 [2] as a source of definition. The report has been prepared to specify terms associated to common technologies, similar manufacturing procedures, similar medical procedures, common materials and specific risk – associated considerations of medical devices. According to the report, these terms are appropriate for providing general groupings to meet particular requirements, such as to identify the range of skills and general technological abilities for which a NB has been approved.Considering the intention of the mentioned report, the lists contain definitions by using or/and grouping collective terms. With such definitions, each list has a manageable quantity of scope expressions and the interested NANDO users have the chance to understand unambiguously the single expressions.The technique of grouping collective terms to scope expressions can be explained with the following example:– The MD 0204 scope expression “Non-active soft tissue implants” is defined by grouping collective terms together. The group contains terms, which could be brought in conjunction with the particular device.– These collective terms can be for “soft tissue implants” (not exhaustive): CT:005, CT:091, CT:234, CT:088, CT: 165, CT:179, CT:143, CT:189, CT:185, CT:160, CT:140, CT:044, CT184, CT:208, CT:207, CT:212, CT:201, CT: 237.Since the NANDO register distinguishes between directives, separate lists for each of the three directives (MDD, AIMD and IVDD) have been set up. The architecture of the lists differs between the directives.The titles support the grouping and formation of structured scope expressions. This results in an improved overview.To have a clear identification and allocation, each expression is assigned with a code. This code can be used as a reference for electronic transmission of data. The codes, ending with values to whole hundreds, are reserved for group titles, e.g. code “AIMD 0100” stands for the title “general active implantable medical devices”. The different expressions within the groups are sequentially numbered. But only the listed terms under each title, and not the titles themselves, are relevant expressions for demonstrating the NB’s competence. The prefixes take reference to the relevant directive and specialities, e.g. “MDS” for “specialities”.The listings have been set up as a consensus result of NBOG. To ensure future consistency of the NANDO data entries, any change of or addition to the scope expressions is subject to NBOG endorsement.4 ImplementationDesignations of new NBs shall take into account the scope description as defined above. DAs forward this information to the European Commission responsible for maintaining the NANDO register as defined within the established electronic notification system.The European Commission will implement the new structure in NANDO rapidly. The DAs shall change the scope of their existing NBs until 21 March 2010. Up to this time, both the new and old NANDO structure will be accessible in parallel.References Directive 93/42/EEC, Directive 90/385/EEC, Directive 98/79/EC[2] CEN/TR 15133 : 2005 "Nomenclature – Collective terms and codes forgroups of medical devices"Keywords Designating Authority, notification, Notified Body, scopeDate of issue March 2009。

SU10000RT3UGSmartOnline 200-240V 10kVA 9kWDouble-Conversion UPS, 6U, Extended Run, Network Card Slot, USB, DB9, Bypass Switch,C19HighlightsIncluded maintenance bypassswitch enables live replacement of UPS with zero downtimeexternal battery packsSome external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)Intelligent battery management system with temperature-compensated charging extends battery lifeHighly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costsBattery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacementUSB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from /poweralertHID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS XCompatible Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD support a wide variety of UPS control and monitoring capabilitiesOptional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module)Supports Emergency Power Off (EPO) via built-in interfaceIncluded rail kit supports 6U 19 inch rackmount installation in 4 post racksOptional 2POSTRMKITHD supports installation in 2 post 19 inch racksFront panel LEDs and LCD readout with scroll controls and password option supports visual monitoring of all major UPS functions and advanced UPS settings for charge level, nominal voltage selection, frequency conversion and other operational parametersLED / LCD display panel rotates for viewing in rackmount or tower configurationsNetwork-grade AC surge and noise suppressionIndustrial mode option (factory preset) enables supports high current startup loads by momentarily switching to bypass mode in response to short duration overload conditionsFrequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)External battery packs are field replaceable and hot swappableSpecificationsOUTPUTOutput Volt Amp Capacity (VA)10000Output kVA Capacity (kVA)10Output Watt Capacity (Watts)9000Output kW Capacity (kW)9.0Output Capacity Details Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or lessPower Factor0.9Crest Factor3:1Nominal Output Voltage(s)Supported200V; 208V; 220V; 230V; 240VNominal Voltage Details Voltage selection via front panel LCD interfaceFrequency Compatibility50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversionFrequency Compatibility Details Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to50Hz or 50Hz to 60Hz (No de-rating); Output frequency regulation +/- 0.05Hz (free running)Output Voltage Regulation (Line+/- 2%Mode)Output Voltage Regulation+/- 10%(Economy Line Mode)Output Voltage Regulation (Battery+/- 2%Mode)Output Receptacles(6) C19Output Circuit Breakers20A double-pole (x6) protects 1 C19 outlet eachOutput AC Waveform (AC Mode)Pure Sine waveOutput AC Waveform (Battery Mode)Pure Sine waveINPUTRated input current (Maximum Load)56.1A (200V), 54A (208V), 51A (220V), 48.8A (230V), 46.8A (240V)Nominal Input Voltage(s) Supported200V AC; 208V AC; 220V AC; 230V AC; 240V ACUPS Input Connection Type HardwireUPS Input Connection Description Supports North American 208/240V input (L1,L2,G) and International 230/220/240V (L,N,PE) input wiring Recommended Electrical Service60AVoltage Compatibility (VAC)200; 208; 230; 240; 220Input Phase Single-PhaseBATTERYFull Load Runtime (min.) 4.3 min. (9000w)Half Load Runtime (min.)12.5 min. (4500w)Expandable Battery Runtime Supports extended runtime with optional external battery packsExternal Battery Pack Compatibility BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PHDC System Voltage (VDC)240Battery Recharge Rate (IncludedLess than 8 hours from 10% to 90% (typical, full load discharge)Batteries)Battery Replacement Description Hot-swappable, user replaceable external battery packsExpandable Runtime YesVOLTAGE REGULATIONVoltage Regulation Description2% output voltage regulation in standard online, double-conversion modeOvervoltage Correction Corrects overvoltages up to 300VUndervoltage Correction Corrects undervoltages as low as 100VUSER INTERFACE, ALERTS & CONTROLSFront Panel LCD Display Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual)Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacementAlarm Cancel Operation Alarm cancel switchAudible Alarm Unique audible alarms for all major UPS, environmental and power conditions (see manual)LED Indicators 6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCDscreen offers additional information and control optionsSURGE / NOISE SUPPRESSIONUPS AC Suppression ResponseTimeInstantaneousEMI / RFI AC Noise Suppression YesPHYSICALIncluded Mounting AccessoryDescription2 sets of adjustable 4 post rack rails includedInstallation Form Factors Supportedwith Optional Accessories2 post rackmount(2POSTRMKITHD); Tower(2-9USTAND)Optional Mounting Accessory Notes 2 sets of 2POSTRMKITHD required for 2 post rackmount installation(supports up to 9U in tower format)Primary Form Factor RackmountUPS Power Module Dimensions(hwd, in.)5.14 x 17.5 x 25.82UPS Power Module Dimensions(hwd, cm)13.06 x 44.45 x 65.58Rack Height (U Spaces)6Maximum Device Depth (in.)37.5Minimum Required Rack Depth(inches)33Maximum Device Depth (cm)95.25Minimum Required Rack Depth (cm)83.82UPS Power Module Weight (lbs.)43UPS Power Module Weight (kg)19.50UPS Dimensions Details Includes 3U UPS/power module, 3U external battery pack plus SUPDMB710IEC PDU with bypass; MAXIMUMDEVICE DEPTH specification refers to the whole UPS installed depth with bypass PDU installedIncluded Battery Pack Dimensions(hwd / in.)5.25 x 17.5 x 25Included Battery Pack Weight (lbs.)158.7Included Battery Pack Weight (kg)71.99UPS Shipping Dimensions (hwd / in.)39.8 x 31.5 x 23UPS Shipping Dimensions (hwd /101.09 x 80.01 x 58.42cm)Shipping Weight (lbs.)331Shipping Weight (kg)150.3Cooling Method FanUPS Housing Material SteelMaximum Device Depth (mm)952Minimum Required Rack Depth (mm)838Primary UPS Height (mm)131Primary UPS Width (mm)444Primary UPS Depth (mm)656Shipping Height (mm)1011Shipping Width (mm)800Shipping Depth (mm)584ENVIRONMENTALOperating Temperature Range+32 to +104 degrees Fahrenheit / 0 to +40 degrees CelsiusStorage Temperature Range+5 to +122 degrees Fahrenheit / -15 to +50 degrees CelsiusRelative Humidity0 to 95%, non-condensingAC Mode BTU / Hr. (Full Load)3415AC Economy Mode BTU / Hr. (Full1280Load)Battery Mode BTU / Hr. (Full Load)4593AC Mode Efficiency Rating (100%91%Load)AC Economy Mode Efficiency Rating96%(100% Load)Operating Elevation (ft.)0-3000m (0 to 10,000 ft.)Audible Noise60 dBA at front side 1 meterOperating Elevation (m)0-3000 mCOMMUNICATIONSCommunications Interface USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interfaceNetwork Management Cards SNMPWEBCARD; TLNETCARD; WEBCARDLX; MODBUSCARD; RELAYIOCARDNetwork Monitoring Port Description Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINIinstallation requires removal of panel containing USB portsPowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at/poweralertCommunications Cable USB, DB9 serial and EPO cables includedWatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applicationsLINE / BATTERY TRANSFERTransfer Time No transfer time (0 ms.) in online, double-conversion modeTransfer Time (Economy Mode)8 ms. typical power failure response in optional economy modeLow Voltage Transfer to BatteryPower (Setpoint)100VHigh Voltage Transfer to BatteryPower (Setpoint)300VSPECIAL FEATURESCold Start (Startup in Battery ModeDuring a Power Failure)Cold-start operation supportedEconomy Mode Operation Optional economy mode enables high efficiency bypass operation with a maximum output voltage variation of+/-10%. Double conversion mode is automatically restored as mains voltage varies beyond +/-10% with less than 1 millisecond transfer time between modes.High Availability UPS Features Automatic inverter bypass; Hot swappable batteries; Hot swappable UPS power module; Manual bypass switch Green Energy-Saving Features High efficiency economy mode operation; Schedulable daily hours of economy mode operationCERTIFICATIONSUPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); CE; Meets FCC Part 15 Category A(EMI)UPS Certification Details IEC 61000-4-5 1995 B Surge ImmunityWARRANTYProduct Warranty Period (Worldwide)2-year limited warrantyConnected Equipment Insurance(U.S., Canada & Puerto Rico)$250,000 Ultimate Lifetime Insurance© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:https:///products/product-certification-agenciesSU10000RT3UG。