CHAPTER 1 AUTOMOTIVE BASICS
Principal Components
Today's average car contains more than 15,000 separate, individual parts that must work together. These parts can grouped into four major categories: engine, body, chassis and electrical equipment.
Engine
The engine acts as the power unit. The internal combustion engine is most common: this obtains its power by burning a liquid fuel inside the engine cylinder. There are two types of engine :gasoline(also called a spark-ignition engine) and diesel(also called a compression-ignition engine).Both engines are called heat engines; the burning fuel generates heat which causes the gas inside the cylinder to increase its pressure and supply
power to rotate a shaft connected to the transmission.
Body
An automobile body is a sheet metal shell with windows, doors, a hood, and a trunk deck built into it. It provides a protective covering for the engine, passengers, and cargo. The body is designed to keep passengers safe and comfortable. The body styling provides an attractive, colorful, modern appearance for the vehicle.
Chassis
The chassis is an assembly of those systems that are the major operating part of a vehicle. The chassis includes the transmission, suspension, steering, and brake systems. Transmission syst ems ― conveys the drive to the wheels. The main components are clutch, gearbox, driveshaft, final drive, and differential.
Suspension― absorbs the road shocks.
Steering― controls the direction of the movement.
Brake― slows down the vehicle.
Electrical Equipment
The electrical system supplies electricity for the ignition, horn, lights, heater, and starter. The electricity level is maintained by a charging circuit. This circuit consists of the battery, alternator (or generator). The battery stores electricity. The alternator changes the engine's mechanical energy into electrical energy and recharges the batte
Engine and power
Engine is used to produce power. The chemical energy in fuel is converted to heat by the burning of the fuel at a controlled rate. This process is called combustion. If engine combustion occurs with the power chamber. ,the engine is called internal combustion engine. If combustion takes place outside the cylinder, the engine is called an external combustion engine.
Engine used in automobiles are internal combustion heat engines. Heat energy released in the combustion chamber raises the temperature of the combustion gases with the chamber. The increase in gas temperature causes the pressure of the gases to increase. The pressure developed within the combustion chamber is applied to the head of a piston to produce a usable mechanical force, which is then converted into useful mechanical power.
Engine Terms
Linking the piston by a connecting rod to a crankshaft causes the gas to rotate the shaft through half a turn. The power stroke “uses up” the gas , so means must be provided to expel the burnt gas and recharge the cylinder with a fresh petrol-air mixture :this control of gas movement is the duty of the valves ;an inlet valve allows the new mixture to enter at the right time and an exhaust valve lets out the burnt gas after the gas has done its job. Engine terms are :
TDC(Top Dead Center):the position of the crank and piston when the piston is farther away from the crankshaft.
BDC(Bottom Dead Center):the position of the crank and piston when the piston is nearest to the crankshaft.
Stroke : the distance between BDC and TDC; stroke is controlled by the crankshaft.
Bore : the internal diameter of the cylinder.
Swept volume : the volume between TDC and BDC.
Engine capacity : this is the swept volume of all the cylinder e.g. a four-stroke having a capacity of two liters(2000cm) has a cylinder swept volume of 50cm.
Clearance volume: the volume of the space above the piston when it is at TDC. Compression ratio = (swept vol + clearance vol)\(clearance vol)
Two-stroke : a power stroke every revolution of the crank.
Four-stroke : a power stroke every other revolution of the crank..
The Four-stroke Spark-ignition Engine Cycle
The spark-ignition engine is an internal-combustion engine with externally supplied in ignition , which converts the energy contained in the fuel to kinetic energy.
The cycle of operations is spread over four piston strokes. To complete the full cycle it takes two revolutions of the crankshaft.
The operating strokes are :
This stroke introduces a mixture of atomized gasoline and air into the cylinder. The stroke starts when the piston moves downward from a position near the top of the cylinder. As the piston moves downward, a vacuum, or low-pressure area, is created.
During the intake stroke, one of the ports is opened by moving the inlet valve. The exhaust valve remains tightly closed.
Compression stroke
As the piston moves upward to compress the fuel mixture trapped in the cylinder, the valves
are closed tightly. This compression action heats the air/fuel mixture slightly and confines it
within a small area called the combustion chamber.
Power stroke
Just before the piston reaches the top of its compression stroke, an electrical spark is introduced from a spark plug screwed into the cylinder head.
The spark ignites the compressed, heated mixture of fuel and air in the combustion chamber to cause rapid burning. The burning fuel produces intense heat that causes rapid expansion of the gases compressed within the cylinder. This pressure forces the piston downward. The downward stroke turns the crankshaft with great force.
Exhaust stroke
Just before the bottom of the power stroke, the exhaust valve opens. This allows the piston, as it moves upward, to push the hot, burned gases out through the open exhaust valve. Then, just before the piston reaches its highest point, the exhaust valve closes and the inlet valve opens. As the piston reaches the highest point in the cylinder, known as TDC, it starts back down again. Thus, one cycle ends and another begins immediately.
Engine Overall Mechanics
The engine has hundreds of other parts . The major parts of engine are engine block , engine heads, pistons, connecting rods, crankshaft and valves. The other parts are joined to make systems. These systems are the fuel system, intake system, ignition system, cooling system, lubrication system and exhaust system. Each of these systems has a definite function. These systems will discussed in detail later.
Engine Block
The engine block is the basic frame of the engine. All other engine parts either fit inside it or fasten to it. It holds the cylinders, water jackets, and oil galleries. The engine block also holds the crankshaft, which fastens to the bottom of the block. The camshaft also fits inside the block, except on overhead-cam engines (OHC). In most cars, this block is made of gray iron, or an alloy (mixture) of gray iron and other metals, such as nickel or chromium. Engine blocks are castings.
Some engine blocks, especially those in smaller cars, are made of cast aluminum. This metal is much lighter than iron. However, iron wears better than aluminum. Therefore, the cylinders in most aluminum engines are lined with iron or steel sleeves. These sleeves are called cylinder sleeves. Some engine blocks are made entirely of aluminum.
Cylinder Head
The cylinder head fastens to the top of the block, just as a roof fits over a house. The underside forms the combustion chamber with the top of the piston. The most common cylinder head types are the hemi, wedge, and semi-hemi. All three of these terms refer to the shape of the engine's combustion chamber. The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by the push-rods. Sometimes the camshaft is fitted directly into the cylinder head and operates on the valves without rockers. This is called an overhead camshaft arrangement. Like the cylinder block, the head is made from either cast iron or aluminum alloy.
Gasket
The cylinder head is attached to the block with high-tensile steel studs. The joint between the block and the head must be gas-tight so that none of the burning mixture can escape. This is achieved by using cylinder head gasket. This is a sandwich gasket, i.e. a sheet of asbestos between two sheets of copper, both these materials being able to withstand the high temperature and pressures within the engine.
Oil Pan or Sump
The oil pan is usually formed of pressed steel. The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft. The oil pump in the lubricating system draws oil from the oil pan and sends it to all working parts in the engine. The oil drains off and runs down into the pan. Thus, there is constant circulation of oil between the pan and the working parts of the engine.
Piston Connecting Rod and Crankshaft
Piston Assembly
The piston is an important part of a four-stroke cycle engine. Most pistons are made from cast aluminum. The piston , through the connecting rod, transfers to the crankshaft the force create by the burning fuel mixture. This force turns the crankshaft .Thin, circular , steel bands fit into grooves around the piston to seal the bottom of the combustion chamber. These bands are called piston rings. The grooves into which they fit are called ring grooves. A piston pin fits into a round hole in the piston . The piston pin joins the piston to the connecting rod . The thick part of the piston that holds the piston is the pin boss.
The piston itself , its rings and the piston pin are together called the piston assembly.
Piston
To withstand the heat of the combustion chamber, the piston must be strong. It also must be light, since it travels at high speeds as it moves up and down inside the cylinder. The piston is hollow. It is thick at the top where it take the brunt of the heat and the expansion force. It is thin at the bottom, where there is less heat. The top part of the piston is the head , or crown . The thin part is the skirt The sections between the ring grooves are called ring lands.
The piston crown may be flat , concave ,dome or recessed . In diesel engine , the combustion chamber may be formed totally or in part in the piston crown , depending on the method of injection . So they use pistons with different shapes.
As Fig.2-9 shows , piston rings fit into ring grooves near the of the piston. In simplest terms, piston rings are thin, circular pieces of metal that fit into grooves in the tops of the pistons.
In modern engines ,each piston has three rings. (Piston in older engines sometimes had four rings, or even five.) The ring’s outside surface presses against the cylinder walls. Rings provide the needed seal between the piston and the cylinder walls. That is, only the rings contact the cylinder walls. The top two rings are to keep the gases in the cylinder and are called compression rings. The lower one prevents the oil splashed onto the cylinder bore from entering the combustion chamber , and is called an oil ring. Chrome-face cast-iron compression rings are commonly used in automobile engines. The chrome face provide a very smooth , wear-resistant surface.During the power stoke , combustion pressure on the combustion rings is very high.
汽车的组成
现代一般的汽车包含超过一万五千个零件，每个独立的部分必须一起工作，这些零件可以分为四个主要的部分：发动机，车身，底盘，和电器系统发动机作为能量总成，内燃机最为普遍，这是由于其能量来源于汽缸内的燃料燃烧，一般有两种类型的发动机，汽油机（点燃式发动机），柴油机（压燃式）这两种内燃机都叫热机。燃烧的燃料产生的炙热气体增加汽缸的压力，提供能量推动曲轴旋转
汽车车身是由一块带窗口的金属板，车门，发动机罩，和行李箱盖构成，它们为发动机，乘客，货物提供一个防护罩，车身的设计保证旅客安全和舒适，车身的样式为车辆提供一个吸引人的，多彩的，时尚的外型。
底盘是汽车运动部分的总成，底盘包括传动系统，悬挂系统，转向系统，和制动系统。传动系统主要推动车轮运转，其主要部件是离合器，变速箱，传动轴，后桥，和差速器。悬挂系统减少来自路面的冲击。转向系统控制运动的方向。制动系统使汽车减速和停车
电器部分，电器系统为汽车的点火，加热，照明，喇嘛，和启动机提供电能。电器系统的好坏主要由充电电路决定，电路由电瓶，交流发电机组成。电瓶存储电能，交流发电机产把机器的机械能转化为电能并且给电瓶充电。
内燃机的作用是做功，把燃料中的化学能转化为热能通过燃料的一定规律燃烧，这个过程叫做燃烧，如果引擎的燃烧在燃烧室内部这种机器叫内燃机，如果在外部燃烧叫外燃机。
普遍运用到汽车上的引擎是内燃机，能量通在燃烧室的燃烧提高在燃烧室的压力和温度，压力通过活塞产生机器的能量，从而转化为有益的机器能量。
活塞通过曲轴和连杆连接从而把上下运动转化为曲轴的旋转运动。做功行程消耗汽油燃料，所以必须提供排除燃烧过的废气和更换新鲜空气和汽油燃料混合气，控制燃气的运动的任务由气阀担当，一个进气阀允许燃烧完的气体排出来，引擎的术语如下：
上止点的是指曲柄和活塞离曲轴最远的距离是的位置，下止点是指曲柄和活
塞的位置离曲轴距离最远的时候，缸径是指汽缸的内壁直径，有效容积是指上止点和下止点之间的有效容积，发动机排量是指汽缸的全部有效容。积燃烧室的容积是指活塞处于上止点和下止后上面的所有空间。压缩比是指有效容积加上燃烧室的容积比上燃烧室的容积。两冲程是指发动机做功冲程一次发动机的曲轴旋转一周。四冲程是指发动机做功冲程一次曲轴旋转两周。
点燃式四冲程发射极的循环过程
点燃式发动机是内燃机另外提供一个点火装置，用来把燃料的化学能转换为机器的动能。一个完整的循环包扩四个活塞冲程，一个完整的活塞冲程曲轴旋转两周。
循环过程如下：吸汽冲程把混合好的空气和汽油混合物吸入汽缸内部，这个冲程开始于活塞的向下运动从汽缸的最高点，当活塞向下运动时一个真空或者比较低的气压产生了。
在进汽冲程期间，一个开口打开了通过运动的阀门，排汽阀仍然紧紧闭合，压缩冲程，活塞向上运动压缩充满汽缸内的空气燃料混合物，气门全部紧紧关闭。压缩运动使空气燃料混合物变热并不它压进入一个很小的空间叫燃烧室。做功冲程，活塞还没到达压缩冲程的最高点时，汽缸顶部的火花塞开始点火放出火花，火花塞使燃烧室的高温，高压下的空气燃料混合物急速的燃烧起来，燃烧的燃料迅速在汽缸内产生高压气体，高压的气体推动活塞向下运动，向下运动的冲程给曲轴一个很大的推动力。
排气冲程，在做功冲程还没结束前，排气阀门打开允许活塞向上运动把炙热的，燃烧过的废气通过排气阀门排出来。就在排气筏门达到汽缸的最高点之前。也就是上止点，它开始向下运动，这是一个完整的冲程结束并且迅速的开始下一个循环。
引擎还有数百个其他部件组成，引擎的主要不件有发动机缸体，发动机盖，活塞，连接销钉，曲轴和气门组成，其他的零部件和它们参与一起构成整个系统。其它系统包括燃油系统，进汽系统，点火系统，冷却系统，润滑系统和排汽系统。每个系统都有特定的作用。
汽缸体的构成
缸体是发动机的最基本的部件，发动机的其他部件都安装在都安装在它的内
部或外部，它包含汽缸体，水管，油路。缸体上还留有曲轴孔用来把它固定在汽缸体的底部，凸轮轴也安装在缸体上，在绝大多数汽车上，缸体由灰色铸铁或者铸件和其他的金属混合制造而成，例如镍，铬等，缸体都是铸件。
有些发动机缸体特别是在一些小型汽车上，大部分由铸铝制造，铝比铸铁要轻很多，然而铁的疲劳强度要比铝高的多，因此汽缸大部分由铝和铁或刚混合在一起，其他的金属叫做缸体的刚架，有些缸体全部有铝来制造而成。
汽缸盖，汽缸盖固定在缸体的顶部，就象房子的屋顶一样，它的下面部分和活塞的上部共同组成燃烧室，一般的普通汽缸盖有半球形，楔形，双球形，这三种分类是根据发动机燃烧室的外型来分的，汽缸盖包含汽阀，阀孔，摇背连接销钉，推动气门工作是靠推杆来完成。有时凸轮轴也直接固定在汽缸盖上，以一定的规律推动气门工作，这种叫做顶置式，和汽缸体一样，汽缸盖也有铸铁或者铝制造。
汽缸垫，汽缸盖以很大的压紧力固定在缸体上的，在两者之间必须密封很好以防止燃汽溢出，这由汽缸垫来完成下图是三层式汽缸垫，，它由一层石棉夹在两片铜片之间构成，这两种材料都能够承发动机受高温高压的环境。
油底壳一般由冲压而成，油底壳和汽缸体的下面部分组成曲轴箱。它们把曲轴围在里面。机油泵把机油从油底壳传送到工作部件的各个地方，机油不断在油底壳中进进出出，，因此，机油保持不停的循环在油底壳和工作零件之间。
活塞是一个很重要的零件在四冲程发动机上，大部分活塞由铝制造，活塞通过活塞销钉把燃汽的能量传递给曲轴，推动曲轴运动，圆形的铁毂环安装在活塞上的槽内用来密封燃室。这些铁毂叫做金属环，活塞销钉把活塞和连杆固定在一起，活塞最厚的地方叫活塞顶部。活塞体，金属环和活塞头部共同构成活塞。
如图片2-9所示，活塞放进靠近顶部的金属槽中，活塞环是几片很薄的金属环。在现代汽车中发动机中，每个活塞有三个活塞环，活塞环的外部紧靠汽必要的防护层，顶部的两片金属环防止气体进入，承受压力，叫做压力，下面的防止环机油进入燃烧室，叫做油环。表面镀银的气环一般应用在汽车引擎上，镀银的表面提供一个非常光滑的表面。在做工冲环程，气环承受很大的压力。
On the vehicle sideslip angle estimation through neural networks: Numerical and experimental results. S. Melzi,E. Sabbioni Mechanical Systems and Signal Processing 25 (2011)：14~28 电脑估计车辆侧滑角的数值和实验结果 S.梅尔兹,E.赛博毕宁 机械系统和信号处理2011年第25期：14~28
摘要 将稳定控制系统应用于差动制动内/外轮胎是现在对客车车辆的标准（电子稳定系统ESP、直接偏航力矩控制DYC）。这些系统假设将两个偏航率(通常是衡量板)和侧滑角作为控制变量。不幸的是后者的具体数值只有通过非常昂贵却不适合用于普通车辆的设备才可以实现直接被测量,因此只能估计其数值。几个州的观察家最终将适应参数的参考车辆模型作为开发的目的。然而侧滑角的估计还是一个悬而未决的问题。为了避免有关参考模型参数识别/适应的问题,本文提出了分层神经网络方法估算侧滑角。横向加速度、偏航角速率、速度和引导角,都可以作为普通传感器的输入值。人脑中的神经网络的设计和定义的策略构成训练集通过数值模拟与七分布式光纤传感器的车辆模型都已经获得了。在各种路面上神经网络性能和稳定已经通过处理实验数据获得和相应的车辆和提到几个处理演习(一步引导、电源、双车道变化等)得以证实。结果通常显示估计和测量的侧滑角之间有良好的一致性。 1 介绍 稳定控制系统可以防止车辆的旋转和漂移。实际上，在轮胎和道路之间的物理极限的附着力下驾驶汽车是一个极其困难的任务。通常大部分司机不能处理这种情况和失去控制的车辆。最近,为了提高车辆安全，稳定控制系统(ESP[1,2]; DYC[3,4])介绍了通过将差动制动/驱动扭矩应用到内/外轮胎来试图控制偏航力矩的方法。 横摆力矩控制系统（DYC）是基于偏航角速率反馈进行控制的。在这种情况下,控制系统使车辆处于由司机转向输入和车辆速度控制的期望的偏航率[3,4]。然而为了确保稳定，防止特别是在低摩擦路面上的车辆侧滑角变得太大是必要的[1,2]。事实上由于非线性回旋力和轮胎滑移角之间的关系，转向角的变化几乎不改变偏航力矩。因此两个偏航率和侧滑角的实现需要一个有效的稳定控制系统[1,2]。不幸的是,能直接测量的侧滑角只能用特殊设备(光学传感器或GPS惯性传感器的组合)，现在这种设备非常昂贵,不适合在普通汽车上实现。因此, 必须在实时测量的基础上进行侧滑角估计，具体是测量横向/纵向加速度、角速度、引导角度和车轮角速度来估计车辆速度。 在主要是基于状态观测器/卡尔曼滤波器(5、6)的文学资料里, 提出了几个侧滑角估计策略。因为国家观察员都基于一个参考车辆模型,他们只有准确已知模型参数的情况下，才可以提供一个令人满意的估计。根据这种观点,轮胎特性尤其关键取决于附着条件、温度、磨损等特点。 轮胎转弯刚度的提出就是为了克服这些困难,适应观察员能够提供一个同步估计的侧滑角和附着条件[7,8]。这种方法的弊端是一个更复杂的布局的估计量导致需要很高的计算工作量。 另一种方法可由代表神经网络由于其承受能力模型非线性系统，这样不需要一个参
机械设计 摘要：机器是由机械装置和其它组件组成的。它是一种用来转换或传递能量的装置，例如：发动机、涡轮机、车辆、起重机、印刷机、洗衣机、照相机和摄影机等。许多原则和设计方法不但适用于机器的设计，也适用于非机器的设计。术语中的“机械装置设计”的含义要比“机械设计”的含义更为广泛一些，机械装置设计包括机械设计。在分析运动及设计结构时，要把产品外型以及以后的保养也要考虑在机械设计中。在机械工程领域中，以及其它工程领域中，所有这些都需要机械设备，比如：开关、凸轮、阀门、船舶以及搅拌机等。 关键词：设计流程设计规则机械设计 设计流程 设计开始之前就要想到机器的实际性，现存的机器需要在耐用性、效率、重量、速度，或者成本上得到改善。新的机器必需具有以前机器所能执行的功能。 在设计的初始阶段，应该允许设计人员充分发挥创造性，不要受到任何约束。即使产生了许多不切实际的想法，也会在设计的早期，即在绘制图纸之前被改正掉。只有这样，才不致于阻断创新的思路。通常,还要提出几套设计方案，然后加以比较。很有可能在这个计划最后决定中,使用了某些不在计划之内的一些设想。 一般的当外型特点和组件部分的尺寸特点分析得透彻时，就可以全面的设计和分析。接着还要客观的分析机器性能的优越性，以及它的安全、重量、耐用性，并且竞争力的成本也要考虑在分析结果之内。每一个至关重要的部分要优化它的比例和尺寸，同时也要保持与其它组成部分相协调。 也要选择原材料和处理原材料的方法。通过力学原理来分析和实现这些重要的特性，如那些静态反应的能量和摩擦力的最佳利用，像动力惯性、加速动力和能量；包括弹性材料的强度、应力和刚度等材料的物理特性，以及流体润滑和驱动器的流体力学。设计的过程是重复和合作的过程，无论是正式或非正式的进行，对设计者来说每个阶段都很重要。 最后，以图样为设计的标准，并建立将来的模型。如果它的测试是符合事先要
旅游服务贸易外文翻译文献(文档含英文原文和中文翻译)
旅游服务贸易的国际竞争力：罗马尼亚的案例 引言 旅游业是唯一的可以为任何发展水平的国家提供贸易机会的服务活动。然而，它也是一个很大程度因为国家的能力和在全球经济中的表现而又有明确的利益分配不均行业，而这又需要提高自己的竞争力。 自20世纪90年代初，罗马尼亚旅游业经历了出口量，生长速率和结构的重大变化。这些不同的波动都影响了罗马尼亚在国际旅游市场上相对的竞争地位并引起了其旅游贸易平衡的变化。同时，新的和更多的错杂的欧式建筑，引起了罗马尼亚的区域旅游竞争力的显著变化。 在此背景下，本文试图提出一个框架，以竞争力和旅游贸易表现之间的关系为重点，来评估罗马尼亚的旅游服务贸易的国际竞争力。 一、国际竞争力视角：国际竞争力之与国际旅游业的相关性 国际竞争力的概念，尽管有争议，难以捉摸，但现在已经得到认可，并继续吸引世界各地的学者和决策者的关注。 到目前为止，为提高国际竞争力已采取措施，都被认为是在经济层面进行的(加瑞利，2003)通常是指一个国家生产的商品和服务，以满足国际市场的考验，并同时保持和增加公民的收入的能力(欧洲委员会，2007)。 由于竞争力最终取决于一国企业在国内和国际的市场成功，所以对竞争力的注意力都集中在企业层面的竞争力上(波特，1990)，对于此的普遍理解是指“……该公司保持，并更好的是，扩大其全球市场份额，增加和扩大利润的能力” (克拉克和盖，1998, 经济合作与发展组织，1993)。 因此，虽然广泛流传但是国际竞争力作为与国家经济和其国际贸易相关
的理论基础已经不太在学术文献进行分析。因此，一个国家国际竞争力的性质，效益和局限性仍然含糊不清(科尔德威尔，2000,克鲁格曼，1994, 1996)。 国际竞争力，是指一个国家在货物和服务贸易方面巩固和保持贸易优势相对于世界其他地区的贸易优势。 每当一个国家的经济福利通过贸易流量的增加，或通过从初始平衡状态的贸易条件的改变而增加，他的国际竞争力都会得到提高(科尔德威尔，2000)。 贸易理论表示，经济福利依赖于一个国家有比较优势的货物和服务的生产。这实际上意味着当生产符合一国的比较优势的情况时国际竞争力能得到保障。如果一国能在国际上表现良好并在出口市场竞争成功，这可能就是他们健全的国际竞争力的标志。 因此，在国际上，竞争力定义为一个经济体能够吸引其出口需求和投资供给需求的能力和在所有社会规范内提升公民生活水平的能力。这反过来又取决于宏观和微观经济政策，影响生产的经济生产率要素和经营成本的法规和制度。 一个可用的文献回顾和实证证据支持国际竞争力可以解释为在一定程度上，一个国家的出口能力这一观点(道乐和沃尔夫，1993, 格博格等. 2004)。还有就是，事实上，是出口表现和国际竞争力之间的循环关系。出口是国际竞争力的第一衡量指标。出口情况的改善会导致了一个国家的竞争力提升。这种效果是一个企业的技能，知识，创新和运用新技术并能够在一个成功的商业方式中利用技术机会等的结果。 另一方面，为了在竞争激烈的全球市场努力成功实现出口，一个国家被迫提高竞争力。更具竞争力的国家，它的经济更强大。因此，它更有能力在全球市场竞争，以吸引具有较高的知识，技能，水平人们去购买新技术等，
The development of automobile As the world energy crisis and the war and the energy consumption of oil -- and are full of energy in one day someday it will disappear without a trace. Oil is not inresources. So in oil consumption must be clean before finding a replacement. With the development of science and technology the progress of the society people invented the electric car. Electric cars will become the most ideal of transportation. In the development of world each aspect is fruitful especially with the automobile electronic technology and computer and rapid development of the information age. The electronic control technology in the car on a wide range of applications the application of the electronic device cars and electronic technology not only to improve and enhance the quality and the traditional automobile electrical performance but also improve the automobile fuel economy performance reliability and emission spurification. Widely used in automobile electronic products not only reduces the cost and reduce the complexity of the maintenance. From the fuel injection engine ignition devices air control and emission control and fault diagnosis to the body auxiliary devices are generally used in electronic control technology auto development mainly electromechanical integration. Widely used in automotive electronic control ignition system mainly electronic control fuel injection system electronic control ignition system electronic control automatic transmission electronic control ABS/ASR control system electronic control suspension system electronic control power steering system vehicle dynamic control system the airbag systems active belt system electronic control system and the automatic air-conditioning and GPS navigation system etc. With the system response the use function of quick car high reliability guarantees of engine power and reduce fuel consumption and emission regulations meet standards. The car is essential to modern traffic tools. And electric cars bring us infinite joy will give us the physical and mental relaxation. Take for example automatic transmission in road can not on the clutch can achieve automatic shift and engine flameout not so effective improve the driving convenience lighten the fatigue strength. Automatic transmission consists mainly of hydraulic torque converter gear transmission pump hydraulic control system electronic control system and oil cooling system etc. The electronic control of suspension is mainly used to cushion the impact of the body and the road to reduce vibration that car getting smooth-going and stability. When the vehicle in the car when the road uneven road can according to automatically adjust the height. When the car ratio of height low set to gas or oil cylinder filling or oil. If is opposite gas or diarrhea. To ensure and improve the level of driving cars driving stability. Variable force power steering system can significantly change the driver for the work efficiency and the state so widely used in electric cars. VDC to vehicle performance has important function it can according to the need of active braking to change the wheels of the car car motions of state and optimum control performance and increased automobile adhesion controlling and stability. Besides these appear beyond 4WS 4WD electric cars can greatly improve the performance of the value and ascending simultaneously. ABS braking distance is reduced and can keep turning skills effectively improve the stability of the directions simultaneously reduce tyre wear. The airbag appear in large programs protected the driver and passengers safety and greatly reduce automobile in collision of drivers and passengers in the buffer to protect the safety of life. Intelligent electronic technology in the bus to promote safe driving and that the other functions. The realization of automatic driving through various sensors. Except some smart cars equipped with multiple outside sensors can fully perception of information and traffic facilities
运作整合 供应链协作的首要问题是提高运作整合的程度。供应链协作课达到的好处，直接关系到捕捉效率之间的职能的企业，以及全国的企业，构成了国内或国际供应链。本章重点阐述的挑战，一体化管理，由研究为什么一体化创造价值，并通过详列的挑战，双方的企业集成和供应链整合。必不可少的供应链流程是确定的。注意的是，然后向信息技术提供，以方便集成化供应链规划。本章最后审查了定价。在最后的分析，定价的做法和政府是至关重要的供应链的连续性。 为什么整合创造价值 基本的优点与挑战的综合管理介绍了在第1章。进一步解释整合管理的重要性，有用的指出客户都至少有三个角度的价值。 传统的角度来看，价值是经济价值。第二个价值的角度来看，是市场价值。 实现双方经济和市场价值是很重要的客户。然而，越来越多的企业认识到商业上的成功也取决于第三个角度来看，价值，被称为关联性。 物流一体化目标 为实现物流一体化的供应链背景下，6个业务目标必须同时取得：（ 1 ）响应，（ 2 ）差额减少，（ 3 ）库存减少，（ 4 ）托运巩固，（ 5 ）质量，（ 6 ）生命周期支持。的相对重要性，每个直接关系到公司的物流战略。 响应 一公司的工作能力，以满足客户的要求，及时被称为反应。作为一再指出，信息技术是促进反应为基础的战略，允许业务的承诺被推迟到最后可能时间，其次是加速投放。实施对应策略服务，以减少库存承诺或部署在预期客户的需求。响应服务转向业务重点从预测未来的需求，以容纳顾客对快速订单到出货的基础上。理想的情况是，在一个负责任的系统中，库存是没有部署，直到客户承诺。支持这样的承诺，公司必须有物流的属性，库存的可用性和及时交付，一旦客户订单收到。 差异减少 所有经营领域的物流系统很容易受到差额。方差结果从未能履行任何预期的层面后勤业务不如预期。举例来说，毫不拖延地在客户订单处理，意想不到的干扰，以便选择，抵港货物损坏，在客户的位置，和/或未能提供在适当的位置上的时间，所有创造无计划的差异，在订单到交货周期。一个共同的解决办法，以保障对不利的差异是使用库存安全库存，以缓冲行动。这亦是共同使用的首选运输，以克服意想不到的差异延误交货计划。这种做法，鉴于其相关的成本高，可以尽量减少使用资讯科技，以维持积极的物流控制。向程度的差异是最小化，物流的生产力将提高。因此，差异减少，消除系统中断，是一个基本的目标，综合物流管理。 库存减少 要达到的目标，库存减少，一个综合物流系统必须控制资产的承诺，并把速度。资产的承诺，是财政的价值部署清单。把速度，反映了利率，这是充实库存随着时间的推移。高转率，再加上预期的库存供货，平均资产用于库存正在迅速而有效利用，这就是整体资产承诺支持一个综合运作减至最低。 库存能够而且确实方便可取的好处这是很重要的要请记住。库存是至关重要的实现规模经济，在制造业和采购。目的是要减少和管理存货，以尽可能最低的水平，同时实现整体供应链绩效的目标。
附录 Modern car’s design always stresses people-oriented, so safety, comfort, Environmental protection and energy saving have been the design theme And target in car design. Ergonomics layout design is not only relate to the effective use of internal space and improve car’s comfort and safety Performance, but it will also impact internal and external modeling results, and further affects the vehicle's overall performance and marketability.Soergonomics’application and research during car design and development process occupy an important position.After more than 50 years of construction and development, China’s Automobile industry has become the leading power of automobile production and consumption in the world. In particular, with the rise and rapid de velopment of independent brand’s vehicles, we pay more attention To the development processes and the technical requirements of hard Points’ layout. Through the three typical processes such as modern vehicle developing Process, body development process and using ergonomic to progress Inner auto-body layout, describe ergonomic layoationship between design, Aunt design in which stage of the process of vehicle development, the red The importance of working steps. The automobile body total arrangement is the automobile design most initial is also the most essential step, is other design stage premise and the foundation, to a great extent is deciding the body design success or failure. Picks generally in the actual design process With by forward and reverse two design method (1) to design (from inside to outside law) to design method namely "humanist", is coming based on the human body arrangement tool to define the pilot and the crew member gradually rides the space and the vehicle comes to pay tribute each article the arrangement, take satisfies the human body to ride with the driving comfortableness as the premise, said simply is determined first satisfies the human body to ride under the comfortable premise, carries on the indoor arrangement first, then carries on the complete bikes external styling design again. The concrete method and the step are as follows: ①Determine 5% and 95% manikin H position and the chair by the SAE recommendation's enjoyable line or the region law adjustment traveling schedule, seat
汽车保险中英文对照外文翻译文献(文档含英文原文和中文翻译)
汽车保险 汽车保险是在事故后保证自己的财产安全合同。尽管联邦法律没有强制要求，但是在大多数州（新罕布什和威斯康星州除外）都要求必须购买汽车保险；在各个州都有最低的保险要求。在鼻腔只购买汽车保险的两个州，如果没有足够的证据表明车主财力满足财务责任法的要求，那么他就必须买一份汽车保险。就算没有法律规定，买一份合适的汽车保险对司机避免惹上官和承担过多维修费用来说都是非常实用的。 依据美国保险咨询中心的资料显示，一份基本的保险单应由6个险种组成。这其中有些是有州法律规定，有些是可以选择的，具体如下： 1.身体伤害责任险 2.财产损失责任险 3.医疗险或个人伤害保护险 4.车辆碰撞险 5.综合损失险 6.无保险驾驶人或保额不足驾驶人险 责任保险 责任险的投保险额一般用三个数字表示。不如，你的保险经纪人说你的保险单责任限额是20/40/10，这就代表每个人的人身伤害责任险赔偿限额是2万美元，每起事故的热身上海责任险赔偿限额是4万美元，每起事故的财产损失责任险的赔偿限额是1万美元。 人身伤害和财产损失责任险是大多数汽车保险单的基础。要求汽车保险的每个州都强令必须投保财产损失责任险，佛罗里达是唯一要求汽车保险但不要求投保人身伤害责任险的州。如果由于你的过错造成了事故，你的责任险会承担人身伤害、财产损失和法律规定的其他费用。人身伤害责任险将赔偿医疗费和误工工资；财产损失责任险将支付车辆的维修及零件更换费用。财产损失责任险通常承担对其他车辆的维修费用，但是也可以对你的车撞坏的灯杆、护栏、建筑物等其他物品的损坏进行赔偿。另一方当事人也可以决定起诉你赔偿精神损失。
文献出处：Barattieri A. The mechanism of service trade liberalization[J]. Journal of International Economics, 2014, 92(1): 1-13. （声明：本译文归百度文库所有，完整译文请到百度文库。） 原文 The mechanism of service trade liberalization Barattieri A Abstract In this paper, Service trade liberalization is the key areas of the United States to promote the TPP negotiations, the United States in the negotiations are pushing mechanism of a high standard of service trade liberalization. In this paper the progress of the TPP negotiations and services trade issues important position, on the basis of the acceptance, architecture design, focus on services, regulatory consistency four aspects in the TPP uncovers the "high standards" service trade liberalization mechanism establishment. American "high standards" service trade liberalization mechanism is tailored to the interests of the United States, actually services in the service of the United States. These mechanisms are through to strengthen and promote the TPP platform, forming reversed transmission to other countries. Key words: the TPP; The United States; Service trade liberalization; High standards; Mechanism design America is the first largest exporter global trade in services, and for many years, continues to service trade surplus. Competitive advantage based on service industry and service industry The importance of promoting American exports, jobs and economic growth, the United States in the multilateral, bilateral and regional multiple layers jointly promoting service trade liberalization. In the Uruguay round negotiations, the United States has overcome many obstacles, for the first time to include the Service Trade in multilateral negotiations, contributed to the general Agreement on Trade in services (the Genre - al Agreement on Trade and Service,
汽车变速器设计 ----------外文翻译 我们知道，汽车发动机在一定的转速下能够达到最好的状态，此时发出的功率比较大，燃油经济性也比较好。因此，我们希望发动机总是在最好的状态下工作。但是，汽车在使用的时候需要有不同的速度，这样就产生了矛盾。这个矛盾要通过变速器来解决。 汽车变速器的作用用一句话概括，就叫做变速变扭，即增速减扭或减速增扭。为什么减速可以增扭，而增速又要减扭呢？设发动机输出的功率不变，功率可以表示为 N = w T，其中w是转动的角速度，T是扭距。当N固定的时候，w与T是成反比的。所以增速必减扭，减速必增扭。汽车变速器齿轮传动就根据变速变扭的原理，分成各个档位对应不同的传动比，以适应不同的运行状况。 一般的手动变速器内设置输入轴、中间轴和输出轴，又称三轴式，另外还有倒档轴。三轴式是变速器的主体结构，输入轴的转速也就是发动机的转速，输出轴转速则是中间轴与输出轴之间不同齿轮啮合所产生的转速。不同的齿轮啮合就有不同的传动比，也就有了不同的转速。例如郑州日产ZN6481W2G型SUV车手动变速器，它的传动比分别是：1档3.704:１；2档2.202:1；3档1.414:1；4档1:1；5档（超速档）0.802:1。 当汽车启动司机选择1档时，拨叉将1/2档同步器向后接合1档齿轮并将它锁定输出轴上，动力经输入轴、中间轴和输出轴上的1档齿轮，1档齿轮带动输出轴，输出轴将动力传递到传动轴上（红色箭头）。典型1档变速齿轮传动比是3:1,也就是说输入轴转3圈，输出轴转1圈。 当汽车增速司机选择2档时，拨叉将1/2档同步器与1档分离后接合2档齿轮并锁定输出轴上，动力传递路线相似，所不同的是输出轴上的1档齿轮换成2档齿轮带动输出轴。典型2档变速齿轮传动比是2.2:1，输入轴转2.2圈，输出轴转1圈，比1档转速增加，扭矩降低。
毕业论文外文文献翻译 毕业设计（论文）题目关于企业内部环境绩效审计的研究翻译题目最高审计机关的环境审计活动 学院会计学院 专业会计学 姓名张军芳 班级09020615 学号09027927 指导教师何瑞雄
最高审计机关的环境审计活动 1最高审计机关越来越多的活跃在环境审计领域。特别是1993-1996年期间，工作组已检测到环境审计活动坚定的数量增长。首先，越来越多的最高审计机关已经活跃在这个领域。其次是积极的最高审计机关，甚至变得更加活跃：他们分配较大部分的审计资源给这类工作，同时出版更多环保审计报告。表1显示了平均数字。然而，这里是机构间差异较大。例如，环境报告的数量变化，每个审计机关从1到36份报告不等。 1996-1999年期间，结果是不那么容易诠释。第一，活跃在环境审计领域的最高审计机关数量并没有太大变化。“活性基团”的组成没有保持相同的：一些最高审计机关进入，而其他最高审计机关离开了团队。环境审计花费的时间量略有增加。二，但是，审计报告数量略有下降，1996年和1999年之间。这些数字可能反映了从量到质的转变。这个信号解释了在过去三年从规律性审计到绩效审计的转变（1994-1996年，20％的规律性审计和44％绩效审计;1997-1999：16％规律性审计和绩效审计54％）。在一般情况下，绩效审计需要更多的资源。我们必须认识到审计的范围可能急剧变化。在将来，再将来开发一些其他方式去测算人们工作量而不是计算通过花费的时间和发表的报告会是很有趣的。 在2000年，有62个响应了最高审计机关并向工作组提供了更详细的关于他们自1997年以来公布的工作信息。在1997-1999年，这62个最高审计机关公布的560个环境审计报告。当然，这些报告反映了一个庞大的身躯，可用于其他机构的经验。环境审计报告的参考书目可在网站上的最高审计机关国际组织的工作组看到。这里这个信息是用来给最高审计机关的审计工作的内容更多一些洞察。 自1997年以来，少数环境审计是规律性审计（560篇报告中有87篇，占16％）。大多数审计绩效审计（560篇报告中有304篇，占54％），或组合的规律性和绩效审计（560篇报告中有169篇，占30％）。如前文所述，绩效审计是一个广泛的概念。在实践中，绩效审计往往集中于环保计划的实施（560篇报告中有264篇，占47％），符合国家环保法律，法规的，由政府部门，部委和/或其他机构的任务给访问（560篇报告中有212篇，占38％）。此外，审计经常被列入政府的环境管理系统（560篇报告中有156篇，占28％）。下面的元素得到了关注审计报告：影响或影响现有的国家环境计划非环保项目对环境的影响;环境政策;由政府遵守国际义务和承诺的10％至20％。许多绩效审计包括以上提到的要素之一。 1本文译自：S. Van Leeuwen.(2004).’’Developments in Environmental Auditing by Supreme Audit Institutions’’ Environmental Management Vol. 33, No. 2, pp. 163–1721
关于杭州中心地区服务业竞争力及其发展 战略的评价（节选） 郑建壮，中国浙江省浙江大学城市学院 江海霞，中国浙江省浙江工业大学 摘要：服务行业的竞争力是直接反映在区服务业的发展水平和潜在能力之中的。本文研究了杭州服务行业的发展现状，从中心区的角度构建了一个服务行业的评价指标体系，并分析了杭州每个中心城区服务业的可持续发展的优势和劣势。最后，文章给杭州的服务行业竞争力的提高提出了战略建议。 关键词：中心地区，服务业，竞争力 1. 引言 20世纪80年代以来，全球经济已呈现从“工业经济”转向于“服务经济”的变化趋势。服务业已成为全球经济好转的一个关键的引擎（2005年李和王），它在改善国家经济、增加就业率、调整产业结构和提高生活水平等方面的重要作用是显而易见的。一般来说一个地区的服务行业发展主要集中于中部地区，而不是郊区，因为中心区一般被视为一个城市经济发展的“心脏”，它在地理位置、交通和文化等方面都占有有利因素，不仅可增强生产要素、人口和产业聚集的力量，也有利于市场的发展。因此，中部地区正在成为服务行业的主要区域（李2007）。本文在分析杭州中心城区的服务业竞争力的基础上，进行了相关的评价，旨在寻找到一种有效的策略以提高城市的服务行业发展。 2. 服务产业竞争力的文献研究 大部分关于服务行业的竞争力的学术研究都是基于它们的地区竞争能力之上的。因此，服务业的竞争力可以简单地定义为“服务行业在竞争中获取和利用资源的能力”。国外的研究学者更倾向于特定的服务行业的竞争力分析与研究，如商业服务行业（2001年Rubalcaba和加戈）、保险业（哈德威克和窦1998）、知识密集服务（1999年Windrum和汤姆林森）。然而，在中国，学者们的研究重点则集中于一个特定的区域，而不是一个特定的行业，如中国的31个主要省份（吴2003），中国六大发展先进的省份（2004年刁、庄），中国16个主要省份（2005年苏、张）。由于很多的因素都可以影响服务业的竞争力和复杂性，大多数中国学者认为，我们应该建立一个多层次的综合评价指标体系，如“总目标指导指数”。
Automobile Brake System汽车制动系统 The braking system is the most important system in cars. If the brakes fail, the result can be disastrous. Brakes are actually energy conversion devices, which convert the kinetic energy (momentum) of the vehicle into thermal energy (heat).When stepping on the brakes, the driver commands a stopping force ten times as powerful as the force that puts the car in motion. The braking system can exert thousands of pounds of pressure on each of the four brakes. Two complete independent braking systems are used on the car. They are the service brake and the parking brake. The service brake acts to slow, stop, or hold the vehicle during normal driving. They are foot-operated by the driver depressing and releasing the brake pedal. The primary purpose of the brake is to hold the vehicle stationary while it is unattended. The parking brake is mechanically operated by when a separate parking brake foot pedal or hand lever is set. The brake system is composed of the following basic components: the “master cylinder” which is located under the hood, and is directly connected to the brake pedal, converts driver foot’s mechanical pressure into hydraulic pressure. Steel “brake lines” and flexible “brake hoses” connect the master cylinder to the “slave cylinders” located at each wheel. Brake fluid, specially designed to work in extreme conditions, fills the system. “Shoes” and “pads” are pushed by the slave cylinders to contact the “drums” and “rotors” thus causing drag, which (hopefully) slows the c ar. The typical brake system consists of disk brakes in front and either disk or drum brakes in the rear connected by a system of tubes and hoses that link the brake at each wheel to the master cylinder (Figure). Basically, all car brakes are friction brakes. When the driver applies the brake, the control device forces brake shoes, or pads, against the rotating brake drum or disks at wheel. Friction between the shoes or pads and the drums or disks then slows or stops the wheel so that the car is braked.