Spiral chute
1、product description
Spiral chute is integrated spiral separator, spiral chute, shaker, centrifugal concentration machine characteristics of the equipment, mining, mineral processing is the best equipment, especially the seaside, riverside, sand beach, the stream of placer mining is more ideal. The product has the advantages of reasonable structure, simple installation, covers an area of small, simple operation, stable ore beneficiation, clear, large processing capacity, high efficiency enrichment ratio high, high recovery rate, reliable operation characteristics. Have weight light, moisture-proof, rust-proof, corrosion resistance, of the feeding quantity and concentration, particle size, quality of volatility adaptability is strong, no noise.
2、Separation principle
Spiral chute is a membrane flow gravity separation equipment, the selection principle is the use of useful minerals and gangue in proportion, particle size, shape differences, in rotating inclined flow by gravity, centrifugal force, hydrodynamic pressure and friction force with different groove face, realize the useful minerals and gangue stratification, branch tape sorting. Heavy, coarse granularity, fast sedimentation of particles gradually moved towards the spiral groove inner edge, the proportion of small, fine particle size, particle sedimentation slow gradually moved to the spiral groove edge, gradually banding, culminating in the spiral groove end by cutting ore tank is respectively connected out, to realize separation.
3、Application
The sorting equipment for grain size mm fine iron ore, titanium ore, chromite, pyrite, zircon, monazite, rutile , phosphorus ore, tungsten, tin, B mine of tantalum niobium ore with the difference of specific gravity, and other non-ferrous metals, rare metals and non-metallic mineral. The sorting process with a stable, easy to control, to allow changes to the mineral concentration range, high enrichment, high recovery rate, small occupation area, little water consumption, simple structure, no need of power, large processing quantity, simple installation, convenient operation, small investment, quick advantages.
4、The method of use
The spiral chute is erected, calibrated vertical line, with metal or wood fixed in position, by the sand pump will ore to spiral top two inlet, adding supplemental water, mineral ore concentration regulation paddle, paddle down naturally from high swirl, in rotating inclined flow produces a kind of inertial centrifugal force, with ore proportion, particle size, shape differences, swirl through the action of gravity and centrifugal force, will be mine and sand separating, concentrate into
the concentrate pipe connected with a hopper, tailings into tailing bucket a pipeline is connected to a sand pool, then the pump discharge, finished processing the whole process.
5、Structure and technical parameter
Mainly by the ore separator, cross, to mine groove, helical groove, cutting trough, pick ore bucket and slot pillar of seven components. The helical groove is spiral chute of the main components, each spiral chute is 2 -- 4 head spiral groove, each head spiral groove is composed of 5 spiral plates (according to mineral properties and beneficiation process need, after tests also consider 4 circles, in order to reduce the equipment height) spiral plate by bolts are fixed together, spiral sheet is made of glass fiber reinforced plastic (FRP) made, light weight, anti-corrosion, moisture-proof, anti deformation and strength.
6、Installation
Spiral chute installation procedures and requirements:
1)First check the glass steel spiral slice quality (especially the work surface
quality), size and shape to meet the requirements for assembly
2)Screw plate connecting bolt hole by the general factory in advance with a drill.
If the manufacturer has no processing is required, according to the same template drilling, in order to ensure good interchangeability.
3)Bolt the five coil sheet are connected into a group of spiral groove, level set,
two adjacent flange connection within the surface smooth transition is connected, special attention should be paid on the surface may not be lower than the corresponding lower sheet surface. Along the diameter direction.(the slot width direction) to edge alignment as the standard, do not allow plate rim inside, so the installation is intended to prevent the occurrence of ore fluid splash.
Joint gap, with putty.
4)The coupled five of a group of four (or two or three) spiral groove rotating
together into a desired shape, distribution.
5)The four roots (three) column is respectively arranged in four (or three, two)
spiral groove, bolt the spiral groove and the pillar is fixed, then install the cross (tripod), so that each spiral along the park are cloth, then all bolts.
After installation, spiral plate to maintain the natural shape, with no obvious variant.
6)Would give mine groove and product interception groove are respectively arranged
in the spiral groove of the head end and the tail end to ensure that the connection of close water leakage. If there is a gap, by coating sealing. To ensure the smooth transition of groove surface.
7)To mine even divider and product assemble bucket and the slot bracket is not
connected, free placed on the bracket, the installation should pay attention to in the chart are position. Each row of tube to distributor are respectively aligned with corresponding to the ore tank.
6-S shaking table
1、Application
The 6-S shaking table is one of the main equipment of gravity concentration, it is widely used in separating tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ore. Can be used for roughing, concentration, scavenging different operations, separating coarse sand fine sand, clay (- of different grain grade It can also be used to separate iron, manganese ore and coal. When processing tungsten, tin ore, the table effective recycling particle size range for the mm.
2、Performance
The shaking table is in the beneficiation process is complex a tilt bed plane, ore particle swarm from the bed surface angle to the trough into, at the same time by lateral flushing water supply to the water tank, and the mineral particles in gravity, lateral flow momentum, bed reciprocating asymmetric motion produced by the inertia and friction effects next, according to the proportion and hierarchical granularity, and along the bed surface for longitudinal movement along the inclined bed surface and transverse motion. Therefore, specific gravity and particle size of different mineral particles along the direction of movement of the respective gradually by the A side to side B fan-shaped shed, concentrate and tailings from the end side of the discharging end is divided into different, concentrate, middling and tailings.
6-s has a double high rich ore ratio, high separation efficiency, safeguards easily, convenient for adjusting the stroke. In change cross fall and stroke is still maintain the surface of bed movement balance, the spring is placed in the box body, compact structure, and can in turn draw final concentrate and tailings.
3、Classification
1）According to the different position of ore, shaker can be divided into right and left type cradle type cradle two forms. The right type cradle for the ore location for the rocking mechanism is on the right side, left type cradle to mine is located in the left.
2）6-S shaker can be divided into fixed shaking table，channel bar shaking table, big channel steel shaking table.
3）According to the concentration particle size, divided into coarse sand table,
sand table and slimmer three.
4、Structure
This table is mainly composed of a bed head, motor, adjustable slope, the bed surface,
mine shafts, sink, and reflex and lubrication system of eight components.
The surface of bed longitudinal reciprocating motion through a crank connecting rod
type driving mechanism to realize. The electric motor through the belt drive to make
the big belt wheel drives the crankshaft to rotate, the rocker made subsequently
moves up and down, rocker downwards, elbow board drive rear axle and the
reciprocating rod moves backwards, the spring being compressed. The bed surface is
through linkage seat and a reciprocating lever connected, so this is also so the
bed surface for backward movement, when the rocker upward movement, due to the
tension spring drive, the bed surface will move forward.
5、Specification
6、Installation and cautions
1) On the basis of drawing, reserved anchor screw holes or pouring good foundation plate, drilling, hole expansion, the construction of concrete foundation.
2) The shaker frame placed on the basis, make each place, calibration and pad frame beam level.
3) The Department of anchor screws tightening, the cradle is fixed on the basis of.
4) Mounted on the drag device, bed surface, bedside and bed and the bed surface connecting rod, attention should be to the front to bedside flywheel.
5) Connect the switch of the motor insurance, check whether the motor leakage, and then good motor wire.
6) The bed surface is not strong beat, collision; not in high temperature and heavy pressure; avoid oil pollution and sun and rain, prevent degeneration.
7) After the installation, a detailed examination, the confirmation, removal of equipment and surrounding sundries.
8) Roller with 10-20 G oil, not to splash as well. The seat sliding rack injection oil to drown the sliding bearing and the lower bearing contact fit; lever type rocking frame bearing has been manufactured with good lithium grease.
9）Put the washing water air machine test machine operation, observation and examination: starting and operation, the moving parts are not loose fever or unusual sounds.
10）Empty test machine to normal, can load test machine, according to the selected minerals, inspection and adjustment of the stroke, stroke, springs, bed longitudinal slope and transverse slope so as to achieve the optimal separation effect. After normal cleaning, it can be put into production.
7、operation and maintenance
1）Feeding volume and concentration of proper, if give mine too large volume, concentration, recovery
rate.
2）The bed surface transverse slope large, flushing water should be smaller; slope is small, flushing water shall be selected.
3) Stroke and frequency of stroke should be adjusted properly. Stroke is too small too big, affected grain stratification. To change the diameter of a motor belt pulley, adjustable stroke Adjusting spindle and the set of eccentric combination, can have different stroke,
Permanent magnetic separator
1、Range of application
The series of magnetic separator for sorting magnetic minerals, non-metallic
materials and waste materials deironing. Such as: reduction of titanium magnetite,
iron ore smelting in front of the purifying selection, ceramic clay, feldspar, quartz,
iron ore, coal and other materials in addition to iron.
2、The structure and working principle
CT series cylinder type permanent magnetic separator, drum body and a groove near
the magnetic system parts are made of non-magnetic material of stainless steel,
cylinder end cap cast in aluminum, and other ordinary steel production. Equipment
structure is composed of a machine frame, body, a cylinder, a magnetic system, power
plant, feed, water, discharging part. The groove body and cylinder distance
according to the mineral separation of lifting adjustment, magnetic angle can be
adjusted at.(no water supply device of dry type)
1）CTC dry magnetic separator: dry aggregate from the hopper into the cylinder
directly to the upper or lower portion of the drum, magnetic mineral particles are
magnetic in the surface of the drum, winding drum rotates to the edges of the natural
unload magnetic system. Non magnetic mineral particles by the action of gravity and
centrifugal force and magnetic products into different ore bucket. Magnetic products
magnetic products and is arranged in the middle of ore isolation plate, according
to the mineral material selected to adjust the situation.
2）CTB semi-counter current magnetic separator magnetic lines in the lower part of
drum. Pulp from the tank into the lower part of the lower roller, non-magnetic
minerals in the direction of movement and the rotation of the drum in the opposite
direction, magnetic minerals moving direction and rollers rotate in the same
direction. The lower part of the spray pipe body is inserted, is used to adjust the
separating operation of slurry concentration, the slurry dispersed into loosely
suspended state into the separation space. The magnetic particles in the magnetic
system of magnetic field force, is absorbed on the surface of the roller, roller
together with the upwardly mobile. In the moving process, because the magnetic lines
of alternating polarity, so that the magnetic mineral particles into a chain of
turning, in the turning process, the inclusions in the magnetic mineral particles
in non magnetic mineral impurities is cleared, so as to effectively improve the purpose of magnetic products. Semi countercurrent magnetic separator for mineral slurry concentration and granularity is sensitive to change, when the concentration is too large or grain through the metropolitan influence index of mineral processing.
3）CTS downstream separator: feeding direction and the direction of rotation of the drum or magnetic mineral moving direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from beneath the tank bottom roller two and the gap between the discharge, magnetic mineral particles are sucked on the surface of the cylinder, with the roller to rotate together to the magnetic system edge discharge, magnetic ore discharging position is provided with a discharging water pipe. Downstream separator on mineral beneficiation of wide adaptability, easy separating space is smooth without obstruction, particularly applicable to contain magnetic minerals a larger proportion of the magnetic separation process.
4）CTN upstream separator: feeding direction and drum rotation direction or magnetic material moves in the opposite direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from tank bottom hole discharging tailings, magnetic mineral particles with the roller against the feed direction to give mine is discharged to the magnetic ore groove, for the reduction of magnetic products with non-magnetic mineral, in magnetic ore unloading mounted before the cleaning water pipe, magnetic ore discharging position is provided with a discharging flushing pipe. Countercurrent separation machine due to the magnetic ore discharge end distance to mine mouth close, magnetic turning effect is poor, so the magnetic ore grade to be slightly lower, but its tailings ore export far away from the mouth, the pulp after longer divided districts, increases the magnetic mineral particles are magnetically attracted to opportunity, all the magnetic separator magnetic product recovery rate is quite high, counter flow type magnetic separator suitable for only require nonmagnetic product precision of various minerals.
3、Specification
4、Installation and use
1) At first machine installed must check the transport loading and unloading is loose, damaged.
2) The horizontal position, implement, conventionally grounded.
3) Check, adjust the magnetic system to the fixed position processing and working
distance.
4) Before the first test machine, drum empty running again, water supply, feeding, everything is normal, and then evenly feeding load test machine. According to the material separation requirements for adjusting the output, quality, recovery rate.
5、Preventive maintenance
1) Removing: drum removable from the frame, standing on a stable level of supporting frame. Have a head driving device placed below.
2) When hoisting drum magnetic parts do not close to the strong magnetic tool or magnetic materials.
3) Will fixed aluminum cover fastening screw removal. The 4 screw mount aluminum end cover removing hole. Parallel to the rotating 4 pearl will cover up after unloading, and then remove the lower end cover fastening screw, can come up with a stainless steel cylinder. Aluminum cover middle small iron cover for the bearing cover and cover solid screw.
4) The assembly must be completely to the magnetic surface and stainless steel inner cylinder of clean.
5) Transmission gears, bearings, reducer shall be regularly maintained and filling
calcium base grease lubricating oil.
6、Cautions
1) Strong magnetic tools, articles shall not be close to the magnetic system.
2) Do not beat, collision stainless steel tube.
3) Super size mineral, not into the machine, so as not to get stuck or wear of stainless steel copper cylinder.
4) Abnormal sound, should be excluded.
Ball mill
1、Purpose and use scope
Ball mill is the material being broken, and then smash the key equipment. Mill widely used in cement, silicate products, new building materials, refractory materials, fertilizer, black and non-ferrous metal processing and glass ceramic production industry, for all kinds of ores and other materials may be grinding of dry or wet grinding.
2、Working principle
This machine is a horizontal cylinder rotating device, outer gear transmission, the warehouse has stepped lining board or corrugated liner, built in different specifications of steel balls, the rotation of the cylinder to generate centrifugal force will bring the steel ball to a certain height after the fall, the material produces severe impact and abrasive. Powder through the discharge grate discharge, then finish grinding operation.
3、Structure
The equipment consists of feeding, discharging part, turning part, a transmission part (reducer, small transmission gear, motors, electrical control) and other major parts. Hollow shaft with steel castings, the liner is detachable, rotary gear hobbing with casting, cylinder liner wear studded body, has good abrasion resistance. The machine running stable, reliable work.
4、Specification
5、Installation and adjustment
1）The basic requirements of installation：
A、Bill mill should be installed on a solid concrete foundation;
B、Ball mill cylinder should be installed after the ground with sufficient height, so as to facilitate the replacement of cylinder liner and grinding body, and a screw bolt lining board;
C、Our generation base map, there are parts of a machine center line and the center line and the installation of anchor bolt anchor bolt size, random supply, base map size only remaining user base design reference, not for construction of.
2）General requirements for the installation
A、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.
B、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.
C、All the connecting bolts should be uniform, firmly tightened。
D、Level check ball mill level, both ends of the horizontal shaft neck of the error is not more than 2 mm.
E、In strict accordance with the procedures for ball mill electrical grounding.
F、φ1200, φ900 to start directly, for more thanφ1500 of star delta starting, the user should according to the load and power capacity for electrical design and installation of wiring.
3）Adjustment of the machine
A、Empty running
After ball mill installation should be carried out 2 hours of empty empty operation before the operation, should be generally examined once all parts are properly installed, and pay attention to the following points:
Check all the connecting bolts are tightened, the lubricating oil is sufficient.
Check the electrical wiring is correct, whether on the safe side, whether the safety grounding.
Actuate the ball should pay attention to the direction of rotation of the
rotating spoon set.
B、Load operation
Running no-load as well, can be used to load test machine. Load should be increased gradually, running, the cylinder shall be loaded into the material quantity specified load 40%, run 2-44 hour, then every 1 hours until 20% increase in load, full load, full load and then continue to run the 8-12 hours.
C、Load operation shall conform to the following requirements, can be formally put into production.
Cylinders in the screw hole into the hole, and the flange is not allowed to have water leakage phenomenon.
Transmission parts no abnormal sound.
Lubrication without flaw.
Reducer gear oil temperature not exceeding 75 Celsius degree.
Main bearing the highest temperature shall not exceed 60 Celsius degree.
Stable gear transmission, the machine had no drama vibration, liner without knocking.
No special fluctuation energy.
Yield and material particle size to meet the requirements.
6、Use and maintenance
1）Requirements for the use of ball mill
A、Use unit should according to the actual situation formulation of ball mill operation system, so as to ensure the normal operation and safety production of ball mill.
B、Before starting the machine should be strictly check the cylinder liner are intact, all bolts shall be tightened, grinding body loading capacity should be consistent with the requirements, lubricating device, electric equipment, auxiliary equipment must be working.
C、Should be timed to cylinder body abrasive body.
D、The rotation should always pay attention to whether it meets the requirements of the discharging granularity.
E、Lubrication for gear oil should ensure clean, and often to check the oil surface position (see compliance with standard oil), general oil temperature shall not be higher than 40 Celsius degree, the highest temperature shall not exceed 75 Celsius degree.
F、If ball mill stop working for long-term, it should support except for feeding and discharging part within the remaining abrasive, and clean the barrel and other parts of the aggregate.
2) The following conditions ball mill must stop.
A、Transmission of the abnormal sound and shock she advised.
B、The occurrence of safety accidents.
C、Manhole cover the cracks or seal failure.
D、The cylinder was found to have cracks.
E、Attachment bolt looseness.
F、Electrical auxiliary equipment failure or lubricating oil temperature is higher than the prescribed.
G、By grinding materials supply.
H、Cylinder liner off.
I、Found foundation cracks or sink.
3）Maintenance
A、Ball mill in the process of operation, does not allow for the maintenance and repair. The transmission part shall be free gas.
B、Every week to check a liner bolts are loose.
C、To open into the bore liner wear inspection every half month.
D、Monthly repair, including temporary emergency repair, mainly small change, minor wearing parts, such as the lining board, a mine feeder spoon head, repair all broken.
E、Once a year in the repair of equipment, parts of major cleaning and adjustment, replacement of large number of vulnerable parts.
F、According to the specific circumstances, in addition to finish, small tasks, focusing on the main parts for repair and replacement.
7、Wearing number
电器、电子产品说明书英译的特点和技巧。 (参考教材P202-210) 1 概述 电器、电子产品说明书是科技文体的一种，它以传递产品的有用信息为主要目的，内容主要包括： 前言、部件、基本功能、使用指南，故障排除等。 其中，基本功能和使用指南是主体部分。 一些简单易用的电器、电子产品，其说明书也相对简略。电器、电子产品说明书译文的预期功能主要是提供商品特点和使用信息，通过让译语用户了解产品的性能、特点、用途、使用和保管等方面，促使其完成购买行为。 2 电器、电子产品说明书英译的特点 特点概括起来包括： 准确性(accuracy)、 简明性(conciseness)、 客观性(objectivity)等。 2.1 准确性 电器、电子产品说明书是为了指导读者正确使用产品而写，它传递的信息（例如：各种数据、图表）首先必须科学准确。在英译过程中，必须
把信息内容如实准确地翻译出来，显化原文隐含的信息，消除歧义。一些专业术语、固定用语和习惯说法必须表达得准确、地道，例如在翻译数码相机说明书时会遇到这样一些术语： 镜头后盖（ear lens cap）、 三角架（tripod）、 数码变焦（digital zoom）、 快门帘幕（shutter curtain）、曝光不足（under exposure）、取景器（view finder）等，需按专业说法表达出来，不可任意生造。 2.2 简明性 简明性特点表现为： (1)内容条目简洁明了，步骤清晰，逻辑性强。 (2)常用缩略形式。例如：液晶显示（Liquid Crystal Display) 常缩写成LCD; 发光二极管(Light Emitting Diode) 常缩写成LED; 中央处理器(Central Processing Unit) 常缩写成CPU; 自动对焦（Auto focus）常缩写成AF; 手动对焦（Manual focus）常缩写成MF 2.3 客观性 电器、电子产品说明书将该产品的相关内容客观地呈现出来，引导读者按照一定的思维逻辑循序渐进，知道该做什么，怎么做，进而了解和正确使用该产品。这些内容带有描述说明的性质，客观而不带有感情色彩。例如：原文：紧急退出功能键可让使用者在电源故障时，以手动方式打开
目前，我国的产品说明书的翻译有许多不尽如人意的地方，概括起来，是由于不懂英语说明书的句型和选词不当所致。以下，我们就来讨论一下说明书的句型和选词问题。 一、产品说明书的若干句型 句型是语言结构的要素。无论英译汉还是汉译英都离不开句型。学习、掌握和使用句型是翻译工作者的必由之路。现将英文产品说明书的若干常见句型说明如下： 1．（情态动词）be＋形容词（或过去分词）＋目的状语 这种句型用语文章开头，说明该产品是做什么用的，例如： 1）本冲床主要用于冲孔、落料、弯曲、浅拉伸、剪切等冷冲工艺。 This press is mainly suitable for cold working operations, such as punching, blanking, bending, shallow drawing, cutting and so on. 2）该产品用于温度225℃以下的热水管或蒸汽管道上。 1
This product can be used in hot water or steam line with the temperature limited to 225℃. 类似常见的类型还有： ... is used for... ... is used to ... ... is used as... ... is designed to... ... is suitable to be used in... ...is available for (to)... ...may be applicable to... ...may be used to... ...can be used as... ...can be designed as... ...is adapted for (to)... 2
产品说明书英文版V HEN system office room 【HEN16H-HENS2AHENS8Q8-HENH1688】
X-Link PRODUCT MANUALS FOR MULTIVIEW CONTROLER
This manual applies to the following models: 3UA Multiview CONTROLER ( Optional Front Panal,LCD Console ) 3UB Multiview CONTROLER ( Optional Front Panal,LCD Console ) 8U Multiview CONTROLER ( Optional Front Panal ) 8U-S Multiview CONTROLER( Optional Front Panal ) 12U Multiview CONTROLER LED Very-large Dot Matrix Screen Multiview CONTROLER ( K Series ) Monitoring Multiview CONTROLER ( N Series ) 3D Multiview CONTROLER ( 3D Series ) 4K Multiview CONTROLER (4k Series ) IMPORTANT NOTICE The company reserves the right to update the manual according to improvement of products without any prior notice. In the process of using, if any content in this manual is inconsistent with actual products or there is any further question during use, please contact document information department of our company. Please read this manual carefully before using the CONTROLER and properly file it after reading for future reference. Pictures are for reference only, subject to our available products. Please pay close attention to those with the Icon of in the article.
Product Manual - Operation and Maintenance Manual Product Name:API 6D Ball Valve January 2012
1Scope This manual covers manually/motor/pneumatic operated seat supported /trunnion supported ball valve having tow/three pieces body with nominal sizes DN 15mm-1200mm (1/2”-48”) and class ranges PN1.6MPa-10MPa(ANS1 class 150-2500). Valve ends may be threaded, flanged, butt-welded or socket 2 Applications 2.1 Ball valves are used to open/close the flow in pipeline. 2.2 The nature of applicable fluid depends on valve material: 2.2.1 Carbon steel valve applies to non-corrosive fluid, such as water, vapor or oil etc. 2.3 Temperature range depend on sent material: PTFE ≤130℃ RPTFE ≤160℃ PPL ≤300℃ NYLON ≤121℃ 3. standard： Basic design API 6D-2008 Inspe crlon tesring BS EN 12266.1-2003 End flange ASME B16.5-2009 TEMP. & PRESSURE ASME B16.34-2009 Face toface ASME B16.10-2009 Main parts and materials ASME materials, see Table 1 Figure 1:Trunnion Ball Valve 4 Structure 4.1 Ball Valve structure is shown in Fig. 1.
Product characteristics: It replenishes sufficient water to creat a moisturizing and water-locking membrane on the skin to maintain the normal water content of the cuticle ,banlance the PH value of the skin and keep the skin healthier. Containing rich fibroin extract and varirties of valued herbal essences,it strengthens the whitening function as well as tone the dark complexion and soften the coticle to build sparking,white ,bright,hydrous and transparent skin. 活肌盈白滋润爽肤水 产品特点：外界的污染，日光的照射，生活和工作的压力另肌肤干燥粗糙，色素沉浊，暗沉无光泽，各种肌肤问题也随之而来，需要及时为肌肤补充大量水分，促进美白营养成分的吸收。 活肌盈白滋润爽肤水触感清爽、柔滑，为肌肤注入充足的水分，并形成保湿锁水薄膜，维持角质层正常含水量，平衡皮肤酸碱值，另肌肤更健康；富含蚕丝蛋白、甘草、海藻精华，提升肌肤美白原动力，改善暗沉肤色，软化角质，重塑肌肤的盈白亮丽，水凝通透。 product characteristics: Being refreshing,it slowers the oxidation caused by free radicals and blocks kinds of radiation to strengthen the resistivity of the skin. Containing rich fibroin extract and varieties of valued herbal essences, it strengthens the whitening funtion as well as concealing the dark and rough state of the skin and marking it white, smooth and fine naturally. 活肌盈BB霜 产品特点：偏黄，暗沉等肌肤问题给生活带来尴尬，需要咋打造清新裸妆的同时给肌肤提供一层保护伞，让你时刻保持自信妆容。 肌活盈白BB霜含有丰富蚕丝蛋白、甘草萃取精华能修复问题肌肤，呈现最时尚的薄透裸妆。添加高保湿美容圣品的霍霍巴油，让基督保有水润明亮，智慧型的抑油功能，维持整天完美的轻透亮。 ACTIVE WHITE MOISTURIZING LOTION Product Charateristics:with natural moisturizing factors,it keeps replenishing water an increase the elasticty of the skin to keep it more moisturized. Containing rich fibroin extract and varieties of valued herbal essences,it strenthens whitening funtion as well as toning the dark and unevening complexion to keep it moisturized,white,graceful and attractive. 肌活盈白润肤乳 产品特点：质地清透幼滑，迅速渗透，持续给予肌肤充分滋养，让干燥粗糙的肌肤变得明亮润滑，显着改善肤色，用后肌肤清透柔亮，犹如出水芙蓉般水润透白。 蕴含蚕丝蛋白、洛神花和透明质酸，深层保湿，并在肌肤表明形成锁
产品说明书范文英文版 电子产品说明书——媒体音响英文说明书范例(中英) 便携式多媒体音响 Portable Multimedia Acoustics 使用说明书User’s Manual 专注于完美音质的追求?? Concentrate on perfect sound pursuit? 感谢您使用本公司出品的数码产品，为了让您轻松体验 产品，我们随机配备了内容详尽的使用说明，您从中可以获 取有关产品的介绍，使用方法等方面的知识。在您开始使用 本机之前请先仔细阅读说明书，以便您能正确的使用本机， 如有任何印刷错误或翻译失误望广大用户谅解，当涉及内容 有所更改时，恕不另行通知。 Thank you for using this digital product of our company. In order to let you experience the product swimmingly, detailed instruction is provided which you can find the product’s introduction, usage and other information. Before using this product, please read the manual carefully, so that you can correctly use it. In case of any printing or translation error, we apologize for the inconvenience. As for the content change, we are sorry for no further notice. 一、产品概述 General Information 本机是一款外观小巧，设计精美、携带方便多媒体小音响， 适用于家居、户外旅游、办公室等场所，随时随地享受音乐
Page1 Product instructions Intelligent vibration rod Page 2 Contents Overview Button function description Charging note Indicator status Use safety and cleaning Interaction and environment Use flow chart Downloading client Connecting Bluetooth Registration information Adding friend Friend interaction Function modes Page 3 Overview Welcome to buy our adult entertainment products. To make you have a more comprehensive understanding of our products and experience the fun of intelligent interaction, we prepare this manual which describes functions and operations of vibrating rod products. Please read it before your use to ensure your interests and power. Thank you again for your support. Main parts of vibrating rod Vibrating part, heating end, main part of vibrating rod, control button, charging interface Button function description Starting button Temperature control button Mode control button Shut down button Page 4 Starting button: Function 1: start after pressing for 3 seconds Function 2: vibration intensity enhances when pressing in starting mode; Description: default intensity after starting is the weakest, vibration intensity has 10 levels. Temperature control button: Press the button one time- start heating function, press the button again: turn off heating function;
便携式多媒体音响 portable multimedia acoustics 使用说明书 user’s manual 专注于完美音质的追求?? concentrate on perfect sound pursuit? 感谢您使用本公司出品的数码产品，为了让您轻松体验产品，我们随机配备了内容详尽的使用说明，您从中可以获取有关产品的介绍，使用方法等方面的知识。在您开始使用本机之前请先仔细阅读说明书，以便您能正确的使用本机，如有任何印刷错误或翻译失误望广大用户谅解，当涉及内容有所更改时，恕不另行通知。 一、产品概述 general information 本机是一款外观小巧，设计精美、携带方便多媒体小音响，适用于家居、户外旅游、办公室等场所，随时随地享受音乐带来的轻松，为您的电脑、数码音乐播放器、手机等视听产品提供超值完美的音质。 二、功能特点 function overview 【mp3播放】直接播放tf卡及u盘mp3文件。 [mp3 player] enable directly playing mp3 files in tf memory card and u disk. 【fm收音机】fm数字立体声收音机，电台记忆播放。（可选机型，功能以实物为准） [fm radio] a fm digital stereo radio; enable mnemonic radio channel playing. 【外挂耳机】本机配置标准耳机插孔，可选配耳机聆听音乐。 [ext earphone] a standard earphone jack included; enable listening with earphone. 【断点记忆】自动记忆上次退出时的曲目播放。 [memory function] memorize the item played last time automatically. 【可充锂电】内置可充电锂电池，环保、节约、实用。 [chargeable battery] chargeable battery included; environmental, economical and functional. 三、播放音乐操作operation 四、产品的按键、插孔功能定义（以实物为准） definition of button and jack （real object be taken as final） 1、 ：长按开机/关机，播放/暂停。在fm模式可以选择已被 保存的电台。 long press for power on/off, short press for play/pause. in fm mold, protected radio channel can be chosen. 2、 ：短按上一曲，选择上一个收音电台，长按调节音量减 小。short press for last item or last channel, long press for turning down the volume. 3、 ：短按下一曲，选择下一个收音电台，长按调节音量增 大。short press for next item or next channel, long press for turning up the volume. 4、 ：模式转换键，短按转为usb/sd卡模式，再短按为 line in(aux音频输入模式)，在fm收音模式，长按为自动搜台并记忆保存电台。 mode shift button: short press and shift to usb/sd mode, once more to line in (aux audio input mode); in fm mode, long press stands for automatic search and memorizing the radio channel. 5、
英语翻译岗位说明书 【篇一：英语翻译工作职责】 职责一：英语翻译工作职责 1、负责公司日常文字翻译工作； 2、负责公司网站的翻译工作； 3、公司资料的翻译、公司涉外形象设计； 4、负责公司涉外接待工作； 5、协助培训部门做好员工英语基础培训； 6、公司海内外项目资料的翻译及资料的整理、存档工作； 7、记录并做好与国外公司电话会议的会议记录； 8、做好相关部门商务谈判及对外联络的现场翻译工作； 9、协助公司做好产品说明书翻译工作； 10、上级交办的其他工作。 职责二：英语翻译工作职责 1. 配合推广部编写各推广活动的文案编辑（中英版） 2. 翻译公司产品的宣传资料和产品资料（中英互译） 3. 接受上级分配的其他工作。 职责三：英语翻译工作职责 1、负责日常英语业务的翻译； 2、接受主管的分配的翻译任务；
3、保证翻译质量； 4、翻译资料的整理收集、知识管理； 5、翻译并与翻译团队成员沟通协作； 6、参加部门内开展的专业培训与交流，提高翻译的专业水平。 职责四：英语翻译工作职责 1. 公司日常客户英语资料的翻译，对相关中英文资料进行整理并归档保存； 2. 各种生产资料的中外文互译，协助其他部门完成所需的中英文互译工作； 3. 短期访问外国专家的申请审批、签证变更等工作的办理；外籍专家在我公司指导期间的沟通翻译、生活管理、机场接送等工作； 4. 国外客户沟通、交流及公司高层管理人员与外商谈判翻译工作，跟踪国外客户定单； 5. 海外专家来华对员工指导培训内容的翻译，公司各种会议的会务工作，做好记录并整理存档； 6. 督促员工的英语普及学习工作； 【篇二：翻译主管的岗位职责1】 翻译主管的岗位职责 一、在公司总经理的领导下，建立公司各项工作制度，全面主持完成公司里 的各项工作任务。 二．根据公司档口的实际情况制定本公司各项工作计划及管理目标并组织实
药品说明书 药品说明书---药品名称（一） 一、药品英文说明书的结构简介 “药品说明书”的英文表达方式有Instructons，Directions，Descriiption 现在多用Package Insert，或简称Insert，也有用Leeflet或Data Sheets.Insert原意为“插入物，插页”。药品说明书即为附在每种药品包装盒中的一份用药说明。经过注册的进口药品一般是国家承认的有效药物，其说明书是指导医生与患者合理用药的重要依据，具有一定的法律效力。 进口药的英文说明书随药品来源的不同，有以英语为母语的国家，也有以英语为外语的国家。说明书繁简难易不同。短者仅百余词，长者可达上万词。较简单的悦明书仅介绍成分、适应症、禁忌症、用法与用量等内容；较详尽的说明书中除上述内容外还包括：药品性状、药理作用、临床药理、临床前动物试验、临床经验、药代动力学、庄意事项、不良反应或副作用、用药过量、药物的相互作用、警告、有效期、包装、贮存条件、患者须知及参考文献等诸多项目。 为了顺利阅读和正确翻译进口药英文说明书，读者除应具备较好的英语基础，掌握一定的专业知识（如医学、化学、药剂学、药理学、药物代谢动力学等）外，还应熟悉英文药品说明书的结构及语言待点等。大多数英文说明书都包括以下内容；①药品名称（Drug NameS），②性状（Descriiption），③药理作用（Pharmacological Actions），④适应症（Indications），⑤禁忌证（Contraindications），⑥用量与用法（DOsage and Administration）．⑦不良反应（Adverse Reactions）。⑧注意事项（Precautions），⑨包装（Package），⑩贮存（Storage），⑾其他项目（Others）。 现将各项专题的表述方法与翻译、结构特点、常用词语及阅读技巧等分述如下。 二、药品名称 英文药品说明书中常见的药品名称有商品名（Trade Name或Proprietary Name），通用名（Generic Name）和化学名（Chemical Name），其中最常见的是商品名。例如，日本田边有限公司生产的熊去氧胆酸片，其商品名为Ursosan（Tablets）：通用名为Ursodesoxycholic Acid（熊去氧胆酸）；化学名为3a,7p dihydroxy-5p-Cholanoic acid（3a，7p二羟基5p胆烷酸）。有时同一种药品，不同的厂家使用不同的商品名称。 药品说明书中的标题药名用其商品名。有时在其右上角（或在上角）有一（R）标记，例如ADRIBLASTNA（R）（阿霉素），TEGRETOL（痛痉宁）。“R”是Register（注册）的缩写，（R）表示该产品已经本国的有关部门核准．取得了此项专用的注册商标（Registered Trade Mark）。有时在商品名之下（或后）又列有通用名或化学名.例如：Rulide（罗力得）之下列有（Roxithromycin，罗红霉素）：Minipress（脉宁平）之后列有（Praxosin HCI，盐酸哌唑嗪）；Nitro-Dur（护心贴片〕之下又列有（Nitroglycerin，硝酸甘油）。 药品名称的翻译可采用音译、意译、音意合译及谐音译意等方法。 1、音译：按英文药品名歌的读音译成相同或相近的汉语。如：Tamoxitn它莫西芬，Ritalin利他林，Am－acin 阿米卡星。音译较为方便，但不能表意。 2、意译：按药品名称所表达的含意译成相应的汉语。例如：cholic Acid 胆酸，Tetracyline四环素;也可其药理作用翻译．如：Minidiab灭糖尿（治疗糖尿病药物），Natulan疗治癌（细胞生长抑制剂），Uraly消石素（治疗尿路结石药物）等。 3、音意合译：药品名称中的一部分采用音译，另一部分采用意译.例如：Coumadin香豆定（coumarin 香豆素），Neo-Octin新握克丁（neo-新）；Medemycin麦迪霉素（－mycin 霉素），Cathinone卡西酮（－one酮）。 4、谐音译意：以音译为原则，选用谐音的汉字，既表音，又表意，音意结合。例如：Antrenyl安胄灵，Doriden多睡丹，Legalon利肝隆，Webilin胃必灵.商品名称可以这样翻洋，而法定名称则规定不可以这样翻译。 药品的化学名称反映出该药品的化学结构组成成分，可借助英汉化学化工词典进行翻译。如果名称很长，可以分解开来，分别查出各个组成部分的名称，组合而成。例如：Catalin（卡他林）的化学名称是1－Hvdroxy- 5－oxo-5H－pyrido（3，2－a）－Phenoxazine－3-carboxylic acid,译成汉语是1-
spiral chute 1、 product description spiral chute is integrated spiral separator, spiral chute, shaker, centrifugal concentration machine characteristics of the equipment, mining, mineral processing is the best equipment, especially the seaside, riverside, sand beach, the stream of placer mining is more ideal. the product has the advantages of reasonable structure, simple installation, covers an area of small, simple operation, stable ore beneficiation, clear, large processing capacity, high efficiency enrichment ratio high, high recovery rate, reliable operation characteristics. have weight light, moisture-proof, rust-proof, corrosion resistance, of the feeding quantity and concentration, particle size, quality of volatility adaptability is strong, no noise. 2、 separation principle spiral chute is a membrane flow gravity separation equipment, the selection principle is the use of useful minerals and gangue in proportion, particle size, shape differences, in rotating inclined flow by gravity, centrifugal force, hydrodynamic pressure and friction force with different groove face, realize the useful minerals and gangue stratification, branch tape sorting. heavy, coarse granularity, fast sedimentation of particles gradually moved towards the spiral groove inner edge, the proportion of small, fine particle size, particle sedimentation slow gradually moved to the spiral groove edge, gradually banding, culminating in the spiral groove end by cutting ore tank is respectively connected out, to realize separation. 3、 application the sorting equipment for grain size 0.3--0.02 mm fine iron ore, titanium ore, chromite, pyrite, zircon, monazite, rutile , phosphorus ore, tungsten, tin, b mine of tantalum niobium ore with the difference of specific gravity, and other non-ferrous metals, rare metals and non-metallic mineral. the sorting process with a stable, easy to control, to allow changes to the mineral concentration range, high enrichment, high recovery rate, small occupation area, little water consumption, simple structure, no need of power, large processing quantity, simple installation, convenient operation, small investment, quick advantages. 4、the method of use the spiral chute is erected, calibrated vertical line, with metal or wood fixed in position, by the sand pump will ore to spiral top two inlet, adding supplemental water, mineral ore concentration regulation paddle, paddle down naturally from high swirl, in rotating inclined flow produces a kind of inertial centrifugal force, with ore proportion, particle size, shape differences, swirl through the action of gravity and centrifugal force, will be mine and sand separating, concentrate into the concentrate pipe connected with a hopper, tailings into tailing bucket a pipeline is connected to a sand pool, then the pump discharge, finished processing the whole process. 5、structure and technical parameter 6、installation spiral chute installation procedures and requirements: 1) first check the glass steel spiral slice quality (especially the work surface
深圳市慧拓鑫科技有限公司 Shenzhen Hui Tuo Xin Technology Co., Ltd. 产品资料 Product information 1、TOP电源防雷箱系列（TOP Power lightning protection box series） 产品介绍Product introduction TOP电源防雷箱系列依据IEC标准设计，8/20波形最大通流容量20KA-100KA，能对电源系统的浪涌电压进行有效的钳制，电源B、C、D级产品均具备。 TOP Power lightning protection box series is designed according to IEC
standard, 8/20 wave maximum flow capacity of 20KA-100KA, to power system voltage surge effectively clamped, power supply B, C, D products have. TOP电源防雷箱配系列具备测试指示灯功能，能有效的指示防雷箱工作电源、浪涌防护状态，并可选备雷击计数、远程遥信监测功能。 TOP Power lightning protection box series Have a test indicator function，Can effectively indicate the lightning protection box power supply、Surge protection status And optional lightning counting、Remote remote monitoring function ★电涌保护器失效报警功能/相零反接及接地不良报警 ★（Surge protection device failure alarm function / Phase zero reverse connection and grounding alarm） ★雷击计数显示、电源指示功能（可选） ★ Lightning counting display，Power indicator function（Optional） ★电浪保护器远程监测功能（失效） ★ Remote monitoring function（Failure） ★残压低、响应时间快 ★ Residual depression and Fast response time ★安装设计人性化、结构严谨 ★ Installation design of humanity and Strict structure ★工作环境温度适应性强 ★ Working environment temperature adaptability
如何翻译英文说明书 【篇一：英语药品说明书的翻译】 英语药品说明书的翻译 英语药品说明书由以下12项内容组成，大多数英语药品说明书结 构基本相同。 1. pakage insert (insert)说明书 2. drug name (medicine) 药品 名称 3. description 性状 4. action 作用 5. indication适应症 6. contraindications 禁忌症 7. precaution注意事项 8. side effects副作用 9. dosage and administration 剂量和用法 10. dacking 包装 11.expiry 失效期 12. manufactring date (manu.date)出厂日期 13.reference 参考文献 药品名称 一、英语药品说明书一般用商品名，由生产厂家向该国政府有关部 门申请注册正式名称，受该国政府法律保护，在药品名称的右上角 有个○r的符号，意思是已经申请注册的法定名称，不可随意改变名称。○r=recive 在药品之后有时issued to(for) the medical profession only短语，意：仅供医界参考。 r例：mobic ○ issued to(for) the medical prfession. 二、译法：分四种译法 1. 音译：按英语读音用相应的汉字译出 例： mobic莫比可 rifampicin利福平 2. 意译：按药品名称各组成部份的英语意义译成汉语 例： streptomycine是由strepto和mycine组成，其中 strepto(链球状)，mycine(霉素)，则按英语意思，译成：链霉素。 因此必须掌握大量前、后缀，才以准确翻译，此种译法多数是抗生 素类药物。 nitroglycerine 由nitro(硝基)+glycerin(甘油)组成，则意为硝酸甘 油 aminophylline由amino+phylline译:氨茶碱 3. 音意并译：按英语药名组成，前面部份按音译，后面部份按意译。例：kanamycine由kama(卡那)+mycine(霉素)组成，按前音后的 方法，译为卡那霉素。
第一节药品名称 一、进口药英文说明书的结构简介 “药品说明书”的英文表达方式有Instructons，Directions，Description 现在多用Package Insert，或简称Insert，也有用Leeflet或Data Sheets。Insert原意为“插入物，插页”。药品说明书即为附在每种药品包装盒中的一份用药说明。经过注册的进口药品一般是国家承认的有效药物，其说明书是指导医生与患者合理用药的重要依据，具有一定的法律效力。 进口药的英文说明书随药品来源的不同，有以英语为母语的国家，也有以英语为外语的国家。说明书繁简难易不同。短者仅百余词，长者可达上万词。较简单的悦明书仅介绍成分、适应症、禁忌症、用法与用量等内容；较详尽的说明书中除上述内容外还包括：药品性状、药理作用、临床药理、临床前动物试验、临床经验、药代动力学、庄意事项、不良反应或副作用、用药过量、药物的相互作用、警告、有效期、包装、贮存条件、患者须知及参考文献等诸多项目。 为了顺利阅读和正确翻译进口药英文说明书，读者除应具备较好的英语基础，掌握一定的专业知识（如医学、化学、药剂学、药理学、药物代谢动力学等）外，还应熟悉英文药品说明书的结构及语言待点等。大多数英文说明书都包括以下内容；①药品名称（Drug NameS），②性状（Description），③药理作用（Pharmacological Actions），④适应症（Indications），⑤禁忌证（Contraindications），⑥用量与用法（DOsage and Administration）．⑦不良反应（Adverse Reactions）。⑧注意事项（Precautions），⑨包装（Package），⑩贮存(Storage），⑾其他项目（Others）。 现将各项专题的表述方法与翻译、结构特点、常用词语及阅读技巧等分述如下。 二、药品名称（第一节) 英文药品说明书中常见的药品名称有商品名（Trade Name或Proprietary Name），通用名（Generic Name）和化学名（Chemical Name），其中最常见的是商品名。例如，***田边有限公司生产的熊去氧胆酸片，其商品名为Ursosan（Tablets）：通用名为Ursodesoxycholic Acid （熊去氧胆酸）；化学名为3a,7p dihydroxy-5p-Cholanoic acid（3a，7p二羟基5p胆烷酸）。有时同一种药品，不同的厂家使用不同的商品名称。 药品说明书中的标题药名用其商品名。有时在其右上角（或在上角）有一(R)标记，例如ADRIBLASTNA(R)（阿霉素），TEGRETOL（痛痉宁）。“R”是Register（注册）的缩写，(R)表示该产品已经本国的有关部门核准．取得了此项专用的注册商标（Registered Trade Mark）。有时在商品名之下（或后）又列有通用名或化学名.例如：Rulide（罗力得）之下列有（Roxithromycin，罗红霉素）：Minipress（脉宁平）之后列有（Praxosin HCI，盐酸哌唑嗪）；Nitro-Dur（护心贴片〕之下又列有（Nitroglycerin，硝酸甘油）。 第二节性状 许多药品说明书的第一项是Description（性状），其原意是“叙述”、“描写”，在药品说明书