Foxconn English
-----教育训练部
一:常用术语
Hon Hai 鸿海
CMM Component module move 机动组件整合
CEM Contract Manufaction service 合约委托代工
IBSC Internet Business Solution Center 国际互联网应用中心
PCEG Personal Computer Enclosure group 个人计算机外设事业群(FOXTEQ)CCBG Connector&cable business group
CPBG Competition business group
ESBG Enterprise system business group 鸿富锦事业群
SABG system assembly business group 系统组装事业群
NWE Net W ork Enclosure
NSE Network system enclosure
NSG Network system group
NFE Network flexible enclosure
Foxcavity = HZ = Hong Zhun 鸿准
Stamping tool shop I 冲模一厂
Stamping tool shop II 冲模二厂
Prototype workshop 样品中心
Steel factory 裁剪厂
PCE molding tooling workshop PCE塑模厂
Hua Nan test and measurement center 华南检测中心
MPE mobile phone enclosure MPE
MBE mobile phone and notebook enclosure 明塑厂
MGE Alloy magnesium alloy enclosure 镁合金
Engineer standard 工标
Document center (database center)数据中心
Design Center 设计中心
Painting 烤漆(厂) Assembly组装(厂)
Stamping 冲压(厂)
Education and Training教育训练
proposal improvement/creative suggestion提案改善
Technological exchange and study 技术交流研习会
Technology and Development Committee 技术发展委员会
BS Brain Storming 脑力激荡
QCC Quality Control Circle 品质圈
PDCA Plan Do Check Action 计划执行检查总结DCC delivery control center 交货管制中心
3C
Computer 计算机类产品
Consumer electronics 消费性电子产品
Communication 通讯类产品
Core value(核心价值)
Love 爱心
Confidence 信心
Decision 决心
Corporate culture(公司文化)
Integration 融合
Responsibility 责任
Progress 进步
3T STRATEGY
Time to market 及时切入生产
Time to volume 及时大量生产
Time to money 及时大量交货
FOUR CONTROL SYSTEM 四大管制系统
Engineering control system 工程管制系统
Quality control system质量管理系统
Manufacturing control system生产管制系统
Management control system经营管制系统
7S
Classification整理(sorting, organization)-seiri
Regulation整顿(arrangement, tidiness)-seiton
Cleanliness清扫(sweeping, purity)-seiso
Conservation清洁(cleaning, cleanliness)-seiktsu
Culture教养(discipline)-shitsuke
Save 节约
Safety安全
二:英文缩写
质量人员名称类
QC quality control 质量管理
FQC final quality control 成品检验
IPQC in process quality control 制程质量检验
OQC output quality control 出货检验
IQC incoming quality control 进料检验
TQC total quality control 全面质量管理
POC passage quality control 段检人员
QA quality assurance 质量保证
OQA output quality assurance 出货质量保证
QE quality engineering 质量工程
质量保证类
FAI first article inspection 新品首件检查
FAA first article assurance 首件确认
CP capability index 能力指数
CPK capability process index 模具制程能力参数SSQA standardized supplier quality audit 合格供货商质量评估FMEA failure model effectiveness analysis 失效模式分析
FQC运作类
AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收
REE Reject 拒收
CR Critical 极严重的
MAJ Major 主要的
MIN Minor 轻微的
Q/R/S Quality/Reliability/Service 质量/可靠度/服务
P/N Part Number 料号
L/N Lot Number 批号
AOD Accept On Deviation 特采
UAI Use As It 特采
FPIR First Piece Inspection Report 首件检查报告
PPM Percent Per Million 百万分之一
制程统计品管专类
SPC Statistical Process Control 统计制程管制
SQC Statistical Quality Control 统计质量管理
GRR Gauge Reproductiveness & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸
DIA Diameter 直径
N Number 样品数
其它质量术语类
QIT Quality Improvement Team 质量改善小组
ZD Zero Defect 零缺点
QI Quality Improvement 质量改善
QP Quality Policy 品质政策
TQM Total Quality Management 全面质量管理
RMA Return Material Audit 退料认可
7QCTools 7 Quality Control Tools 品管七大手法
通用之件类
ECN Engineering Change Notice 工程变更通知(供货商)
ECO Engineering Change Order 工程改动要求(客户)
PCN Process Change Notice 工序改动通知
PMP Product Management Plan 生产管制计划
SIP Standard Inspection Procedure 制程检验标准程序
SOP Standard Operation Procedure 制造作业规范
IS Finished product Inspection Specification 成品检验规范
BOM Bill Of Material 物料清单
PS Package Specification 包装规范
SPEC Specification 规格
DWG Drawing 图面
系统文件类
ES Engineering Standard 工程标准
CGOO China General PCE龙华厂文件
IWS International Workman Standard 工艺标准
ISO International Standard Organization 国际标准化组织
GS General Specification 一般规格
部类
PMC Production & Material Control 生产和物料控制
PCC Product control center 生产管制中心
PPC Production Plan Control 生产计划控制
MC Material Control 物料控制
DCC Document Center 文控中心
QE Quality Engineering 质量工程(部)
QA Quality Assurance 质量保证(处)
QC Quality Control 质量管理(课)
PD Product Department 生产部
LAB Laboratory 实验室
IE Industrial Engineering 工业工程
R&D Research & Design 研发部
生产类
PCs Pieces 个(根,块等)
PRS Pairs 双(对等)
CTN Carton 纸箱
PAL Pallet/skid 栈板
PO Purchasing Order 采购订单
MO Manufacture Order 生产单
D/C Date Code 日期编码
ID/C Identification Code (供货商)标识符
SWR Special Work Request 特殊工作需求(专业需求)
L/N Lot Number 批号
P/N Part Number 料号
OEM Original Equipment Manufacture 原设备制造(原装设备)
PC Personal Computer 个人计算机
CPU Central Processing Unit 中央处理器
A.S.A.P As Soon As Possible 尽可能的
E-MAIL Electrical-Mail 电子邮件
N/A Not Applicable 不适用
QTY Quantity 数量
I/O input/output 输入/输出
NG Not Good 不行,不合格
C=0 Critical=0 极严重不允许
APP Approve 核准,认可,承认
CHK Check 确认、审核
ASS'Y Assembly 装配,组装
T/P True Position 真位度
5W1H When, Where, Who, What, Why, How to
6M Man, Machine, Material, Method, Measurement, Message
4MTH Man, Material, Money, Method, Time, How 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略质量保证
DQA Design Quality Assurance 设计质量保证
MQA Manufacture Quality Assurance 制造质量保证(产品质量保证)SSQA Sales and service Quality Assurance 销售及服务质量保证
LRR Lot Reject Rate 批退率
SPS Switching power supply 电源箱
DT Desk Top 卧式(机箱)
MT Mini-Tower 立式(机箱)
DVD Digital Video Disk
VCD Video Compact Disk
LCD Liquid Crystal Display
CAD Computer Aided Design
CAM Computer Aided Manufacturing
CAE Computer Aided Engineering
PCB Printed Circuit Board 印刷电路板
CAR Correction Action Report 改善报告
NG Not Good 不良
WDR Weekly Delivery Requirement 周出货要求
PPM Percent Per Million 百万分之一
TPM Total Production Maintenance 全面生产保养
MRP Material Requirement Planning 物料需求计划
OS Operation System 操作系统
TBA To Be Assured 待定,定缺
D/C Drawing Change 图面更改
P/P Plans & Procedure
EMI Electrical-Music Industry 电子音乐工业
Electrical Magnetic Interference 电子干扰
RFI Read Frequency Input 读频输入
MMC Maximum Material Condition
MMS Maximum Material Size
LMC Least Material Condition
LMS Least Material Size
LED lighting-emitting diode 发光二极管
QBR Quarter Business Record
CIP Continuous improvement process CNC Computerized numeral controller B2C Business to customer
FGI Forecasted Goal Inventory
B2B Business to business
A VL Approved vendor list
POP Procedure of packaging
EOL End of life
VDCS Vender defect correcting sheet
PDCS Process defect correcting sheet
GRN Goods receiving note
A/R Accounting receivable
A/P Accounting payable
三:专业词汇
通用类Director 经理
president董事长
operator作业员
position职务
general manager总经理special assistant 特助
deputy manager |'depjuti|
=vice manager副理
deputy supervisor =vice supervisor副课长
group leader组长
line leader线长
supervisor 课长
responsible department负责单位Human Resources Department
人力资源部
Head count 人头数production department生产部门planning department企划部
QC Section品管课
stamping factory冲压厂painting factory烤漆厂molding factory成型厂administration/general affairs dept./总务部
production unit生产单位meeting minutes会议记录distribution department分发单位subject主题
conclusion结论
decision items决议事项
pre-fixed finishing date预定完成日Color management 颜色管理Visual management 目视管理production capacity生产力
first count初盘
first check初盘复棹
second count 复盘
second check复盘复核quantity of physical inventory
second count 复盘点数量
physical inventory盘点数量
physical count quantity账面数量
difference quantity差异量
spare parts physical inventory
list备品盘点清单
cause analysis原因分析
waste materials废料
description品名
specification 规格
model机种
work order工令
revision版次
remark备注registration登记
registration card登记卡
to control管制
application form for purchase请购单
consume, consumption消耗
to notify通知
to fill in填写
to collect, to gather收集
statistics统计
cosmetic inspection standard
外观检验规范
computer case 计算机外壳(组
件)
personal computer enclosure
计算机机箱产品
front plate前板
rear plate后板
chassis |'∫?si| 基座
bezel panel面板
Hood 上盖
base pan 基座
bezel 面板
riser card 扩充卡
flat cable 扁平电缆
TOP driver cage 上磁架
bottom driver cage 下磁架
resin film 树脂膜
raw materials原料
materials物料
steel plate钢板
roll/coil material卷料
spare parts =buffer备品
plastic parts塑料件
sheet metal parts/stamping parts
冲件
material check list物料检查表
finished product成品
semi-finished product半成品
good product/accepted goods/
accepted parts/good parts良品
defective product/non-good
parts不良品
disposed goods处理品
warehouse/hub仓库
packing material包材
basket蝴蝶竺
plastic basket胶筐
flow chart流程窗体
production tempo生产进度现状
lots of production生产批量
manufacture procedure制程
to revise, modify修订
to switch over to, switch—to,
switching over切换
engineering bottleneck, project
difficulty工程瓶颈
glove(s)手套
glove(s) with exposed fingers割手套
Band-Aid创可贴
Industrial alcohol工业酒精
broom扫把
mop拖把
vacuum cleaner吸尘器rag 抹布
garbage container灰箕garbage can垃圾箱garbage bag垃圾袋liaison联络单
rags抹布
lamp holder灯架
to mop the floor拖地
to clean a table擦桌子air pipe 气管
delivery deadline交货期die worker模工production, to produce生产
equipment设备
resistance电阻
beacon警示灯
coolant冷却液
crusher破碎机
club car高尔夫球车
plate电镀
power button电源按键
reset button重置键
forklift叉车
W orkshop traveler 天车
trailer =long vehicle拖板车
Hydraulic trolley手压车
hydraulic hand jack油压板车
casing = containerization装箱
velocity速度
patent专利
coordinate坐标
supply and demand供求
career card履历卡
barricade隔板
carton box纸箱
to pull and stretch拉深
work cell/work shop工作间
sub-line支线
bottleneck 瓶颈模具工程类
plain die简易模pierce die冲孔模forming die成型模progressive die连续模stage die工程模compound die复合模shearing die剪边模riveting die铆合模feature die公母模male die公模female die母模cavity型控母模core模心公模
die change 换模
to fix a die装模
to repair a die修模punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板upper plate上模板lower plate下模板die pad下垫板die holder下夹板
die set下模座
bottom block下垫脚
bottom plate下托板(底板)
upper supporting blank上承板
upper padding plate blank上垫板
top plate上托板(顶板)
top block上垫脚
stripping plate内外打(脱料板)
outer stripper外脱料板
inner stripper内脱料板
lower stripper下脱料板punch
冲头
insert入块(嵌入件)
deburring punch压毛边冲子
groove punch压线冲子
stamped punch字模冲子
round punch圆冲子
special shape punch异形冲子
bending block折刀
roller滚轴
baffle plate挡块
located block定位块
supporting block for location
定位支承块
air cushion plate气垫板
air-cushion eject-rod气垫顶杆
trimming punch切边冲子
stiffening rib punch = stinger
加强筋冲子
ribbon punch压筋冲子
reel-stretch punch卷圆压平冲子
guide plate定位板
sliding block滑块
sliding dowel block滑块固定块
die locker锁模器
pressure plate =plate pinch压板
thickness gauge厚薄规
cutting die, blanking die冲裁模
die block模块
folded block折弯块
sliding block滑块
location pin定位销
lifting pin顶料销
die plate, front board模板
padding block垫块
stepping bar垫条
panel board镶块
to load a die装上模具
to unload a die 御模具
active plate活动板
lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱
spring-box eject-rod弹簧箱顶杆spring-box eject-plate弹簧箱顶板bushing block衬套
cover plate盖板
guide pad导料块
pilot导正筒
trim剪外边
pierce剪内边
pocket for the punch head挂钩槽slug hole废料孔
radius半径
shim/wedge/heel/pad/spacer/gas ket楔子
torch-flame cut火焰切割
set screw止付螺丝
form block折刀
round pierce punch =die button 圆冲子
shape punch =die insert异形子stock located block定位块metal plate钣金
miller铣床
grinder磨床
tolerance公差
score =groove压线
sliding block滑块lathe车active plate活动板
baffle plate挡块
cover plate盖板
groove punch压线冲子
air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板capability能力parameter参数
factor系数
driller钻床
set up die架模
height of die setting up架模高
度
analog-mode device类模器
inner guiding post内导柱
inner hexagon screw内六角螺钉
dowel pin固定销
coil spring弹簧
lifter pin顶料销
eq-height sleeves =spool等高套筒
pin销
lifter guide pin浮升导料销
guide pin导正销
wire spring圆线弹簧
outer guiding post外导柱
stop screw止付螺丝
located pin定位销
outer bush外导套
press specification冲床规格
die height闭模高度
flow mark流痕
welding mark溶合痕
post screw insert螺纹套筒埋值
self tapping screw自攻螺丝
stripper plate脱料板
piston活塞
handle mold手持式模具
flash mold溢流式模具
positive mold挤压式模具
split mold分割式模具
die lifter举模器
top stop上死点
bottom stop下死点
one stroke一行程
to continue, cont.连动
to grip(material)吸料
location lump, locating piece,
location block定位块
reset复位
to file burr 锉毛刺
embedded lump |in'bed| |l mp|
镶块
stamping-missing漏冲
to tight a bolt拧紧螺栓
to loosen a bolt拧松螺栓
punched hole冲孔
to cut edge =side cut =side scrap
切边
to bending折弯
to pull, to stretch拉伸
engraving, to engrave刻印
stamping 油印
to stake铆合
designing, to design设计
design modification
设计修改成
gauge(or jig)治具
pedal踩踏板
stopper阻挡器
flow board流水板
torque扭矩
spline =the multiple keys花键
quenching淬火
tempering回火
annealing退火
carbonization碳化
alloy合金
tungsten high speed steel钨高速的
moly high speed steel钼高速的
forming成型(抽凸,冲凸)
draw hole抽孔
bending折弯
emboss凸点
dome凸圆
semi-shearing半剪
stamp mark冲记号
deburr or coin压毛边
punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线stamp letter冲字(料号)
tick-mark nearside正面压印
tick-mark farside反面压印
extension DWG展开图
procedure DWG工程图
die structure DWG模具结构图
冲压类
punch, press冲
punching machine 冲床hydraulic machine油压机
jack升降机
decoiler整平机
manufacture management制造管理stamping, press冲压feeder送料机
rack, shelf, stack料架
taker取料机
to reverse material 翻料
to load material上料
to unload material卸料
to return material/stock to退料
scraped |'skr?pid|报废
scrape ..v.刮;削
robot机械手
production line流水线
packaging tool打包机
packaging打包
成型类
well type蓄料井
insulated runner绝缘浇道方式hot runner热浇道
runner plat浇道模块
valve gate阀门浇口
band heater环带状的电热器spindle阀针
spear head刨尖头
slag well冷料井
cold slag冷料渣
air vent排气道
welding line熔合痕
eject pin顶出针
knock pin顶出销
return pin回位销反顶针sleeve套筒
stripper plate脱料板
insert core放置入子
runner stripper plate浇道脱料板guide pin导销
eject rod (bar)(成型机)顶业捧subzero深冷处理
three plate三极式模具
runner system浇道系统
stress crack应力电裂
orientation定向
sprue gate射料浇口,直浇口
nozzle射嘴
sprue lock pin料头钩销(拉料杆)
slag well冷料井
side gate侧浇口
edge gate侧缘浇口
tab gate搭接浇口
film gate薄膜浇口
flash gate闸门浇口
slit gate缝隙浇口
fan gate扇形浇口
dish gate因盘形浇口
diaphragm gate隔膜浇口
ring gate环形浇口
submarine gate潜入式浇口
tunnel gate隧道式浇口
pin gate针点浇口
runner less无浇道
sprue less 无射料管方式
long nozzle延长喷嘴方式
spur浇口;溶
waste废料
board广告牌
sliding rack滑料架
to impose lines压线
to compress, compressing压缩
character die字模
to feed, feeding送料
material change, stock change
材料变更
feature change 特性变更
prepare for, make preparations for
准备
rotating speed, revolution转速
abnormal handling异常处理
组装类
Assembly line组装线
Layout布置图
Conveyer流水线运输带
Rivet machine拉钉机
Rivet gun拉钉枪
Screw driver起子
Electric screw driver电动起子Hydraulic machine 液压机Pneumatic screw driver气动起子automation自动化
to stake, staking, riveting铆合add lubricant oil加润滑油argon welding氩焊
cylinder油缸
robot机械手
conveying belt输送带transmission rack输送架
to draw holes抽孔
bolt螺栓
nut 螺母
screw 螺丝
identification tag标示单
screwdriver plug起子插座
automatic screwdriver电动启子
to move, to carry, to handle搬运
be put in storage入库
packing包装
staker = riveting machine铆合机
fit together组装在一起
fasten锁紧(螺丝)
fixture 夹具(治具)
pallet/skid栈板
barcode条形码
barcode scanner条形码扫描仪
fuse together熔合
fuse machine/heat stake热熔机
processing, to process加工
delivery, to deliver 交货
to return delivery to. to send
delivery back to return of goods退货
easily damaged parts易损件
standard parts标准件
to lubricate润滑
spring 弹簧
spare tools location/buffer手工
备品仓
spare molds location模具备品仓
tox machine自铆机
烤漆类
phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂
main manifold主集流脉organic solvent有机溶剂demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传
rack上料
volatile挥发性
degrease脱脂
rinse水洗
alkaline etch龄咬
desmot剥黑膜
D.I. rinse纯水次
Chromate铬酸处理
Anodize阳性处理seal封孔
scraped products报放品
disposed products处理品
dismantle the die折模
auxiliary function辅助功能
heater band 加热片
thermocouple热电偶
derusting machine除锈机
degate打浇口
dryer烘干机
induction感应
induction light感应光
response =reaction =interaction
感应
ram连杆
edge finder巡边器
concave凸
convex凹
cold slug冷块
blush 导色
gouge沟槽;凿槽
satin texture段面咬花
witness line证示线
grit沙砾
granule =pellet =grain细粒
sand blasting喷沙
grit maker抽粒机
cushion缓冲
fillet镶;嵌边
roller pin formality滚针形式
cam driver铡楔
shank摸柄
crank shaft曲柄轴
品质类
qualified products, up-to-grade products良品defective products, not
up-to-grade products不良品defective product box不良品箱poor processing 制程不良poor incoming part来件不良exposed metal/bare metal金属裸露excessive defect过多的缺陷critical defect极严重缺陷major defect主要缺陷
minor defect次要缺陷
not up to standard不合规格cosmetic defect外观不良
lack of painting烤漆不到位slipped screw head/slippery slipped thread滑丝
missing part漏件
wrong part错件
oxidation氧化
defective threading抽芽不良poor staking铆合不良deficient purchase来料不良deficient manufacturing procedure 制程不良
cosmetic inspection外观检查inner parts inspection内部检查blister 气泡
angular offset 角度偏差
dent 压痕
scratch 刮伤
deformation 变形
filings 铁削defective label 不良标签
abrasion 磨损
Breaking. (be)broken,(be)cracked
断裂
short射料不足
nick缺口
speck瑕疪
shine亮班
splay 银纹
gas mark焦痕
delaminating起鳞
speckle斑点
mildewed =moldy = mouldy发霉
deformation变形
burr(金属)flash(塑件)毛边
poor staking铆合不良
excessive gap间隙过大
grease/oil stains油污
inclusion杂质
shrinking/shrinkage缩水
mixed color杂色
fold of packaging belt打包带折皱
painting make-up补漆
discoloration羿色
water spots水渍
impurity 杂质
Mismatch 错位
failure, trouble 故障
deformation 变形
rust 生锈
peel 脱漆
Shrink 缩水
Contamination 脏污
water spots 水渍
Gap 间隙
label error 标签错误
Missing label 漏贴
rejection criteria 拒收标准
Suspected rejects 可疑庇
abrasion 损伤、磨损
Texture surface 印花纹表面
Streak 条纹
stains 污点
Blotch 斑点
discoloration 脱色
Inclusion 杂质
slug mark 压痕
dirt grime 灰尘
blush 毛边薄膜
sink 下凹
Hickey 漏漆
labels and logos 贴纸与商标
Configuration labels 组合贴纸
corrugated container 瓦摆纸箱
Delaminating 脱层
splattering 散点
Gouge 锉孔
puckering 折痕
富士康工厂英语
公司英语 -----教育训练部 一:常用术语 BAIBEI 百倍 CMM Component module move 机动组件整合 CEM Contract Manufaction service 合约委托代工 IBSC Internet Business Solution Center 国际互联网应用中心 PCEG Personal Computer Enclosure group 个人计算机外设事业群(FOXTEQ)CCBG Connector&cable business group CPBG Competition business group ESBG Enterprise system business group 鸿富锦事业群 SABG system assembly business group 系统组装事业群 NWE Net Work Enclosure NSE Network system enclosure NSG Network system group NFE Network flexible enclosure Foxcavity = HZ = Hong Zhun 鸿准 Stamping tool shop I 冲模一厂 Stamping tool shop II 冲模二厂 Prototype workshop 样品中心 Steel factory 裁剪厂 PCE molding tooling workshop PCE塑模厂 Hua Nan test and measurement center 华南检测中心 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 镁合金 Engineer standard 工标 Document center (database center)资料中心 Design Center 设计中心 Painting 烤漆(厂) Assembly组装(厂) Stamping 冲压(厂) Education and Training教育训练 proposal improvement/creative suggestion提案改善 Technological exchange and study 技术交流研习会 Technology and Development Committee 技术发展委员会
职场常用英语缩写 【篇一:职场常用英语缩写】 【cbo】 chief brand officer 【cco】 chief cultural officer 开发总监【cdo】 chief development officer 【cho】 chief human resource officer 首席信息官【cio】 chief information officer 【cko】 chief knowledge officer 首席市场官【cmo】 chief marketing officer 首席谈判官【cno】 chief negotiation officer 首席营运官【coo】 chief operation officer 公关总监【cpo】 chief public relation officer 质量总监【cqo】 chief quality officer 销售总监【cso】 chief sales officer 首席技术官【cto】 chief technology officer 评估总监【cvo】 chief valuation officer cao:answerer 首席答辩人,专门负责解答媒体、债权人和用户等有关网站倒闭问题的 询问。 cbo:business plan 首席商业计划官,是的助理之一,专门针对不同的投 资人制订相应的bp。 cco:cost control 首席成本控制官,凡超过100元以上的支出必须由cc0批准。 cdo:domain name 首席域名官,负责公司域名注册、网站清盘时域名的拍卖、域名法 律纠纷等相关问题。 ceo:exchange 首席交换官,一般由国际ceo自由联盟随时更换,是一个常设的短期职 能岗位,类似足球教练。 cfo:financial ,公司最重要的领导人,决定公司命运的主要人物。cgo:guideline 首席方针制订官,规划公司的宏伟蓝图,一般是5年以后的目标。
常用术语及词汇 富士康常用術語及詞彙一:常用術語 Hon Hai 鴻海FOXCONN CMM Component module move 機動元件整合 CEM Contract Manufaction service 合約委托代工 IBSC Internet Business Solution Center 國際互聯網應用中心 PCEG Personal Computer Enclosure group 個人電腦外設事業群(FOXTEQ)CCBG Connector&cable business group CPBG Competition business group 競爭產品事業群 ESBG Enterprise system business group 鴻富錦事業群 SABG system assembly business group 系統組裝事業群 NWE Net Work Enclosure NSE Network system enclosure NSG Network system group NFE Network flexible enclosure Foxcavity = HZ = Hong Zhun 鴻準 Stamping tool shop I 沖模一廠 Stamping tool shop II 沖模二廠 Prototype workshop 樣品中心 Steel factory 裁剪廠 PCE molding tooling workshop PCE塑模廠 Hua Nan test and measurement center 華南檢測中心 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 鎂合金 Engineer standard 工標 Document center (database center)資料中心 Design Center 設計中心 Painting 烤漆(廠) Assembly組裝(廠) Stamping 沖壓(廠) Education and Training教育訓練 proposal improvement/creative suggestion提案改善 Technological exchange and study 技術交流研習會 Technology and Development Committee 技術發展委員會 BS Brain Storming 腦力激蕩 QCC Quality Control Circle 品管圈 PDCA Plan Do Check Action 計劃執行檢查總結
全国人民代表大会National People's Congress (NPC) 主席团Presidium 常务委员会Standing Committee 办公厅General Office 秘书处Secretariat 代表资格审查委员会Credentials Committee 提案审查委员会Motions Examination Committee 民族委员会Ethnic Affairs Committee 法律委员会Law Committee 财政经济委员会Finance and Economy Committee 外事委员会Foreign Affairs Committee 教育、科学、文化和卫生委员会Education,Science,Culture and Public Health Committee 内务司法委员会Committee for Internal and Judicial Affairs 华侨委员会Overseas Chinese Affairs Committee 法制工作委员会Commission of Legislative Affairs 特定问题调查委员会Commission of Inquiry into Specific Questions 宪法修改委员会Committee for Revision of the Constitution 2、中华人民共和国主席President of the People's Republic of China 3、中央军事委员会Central Military Commission 4、最高人民法院Supreme People's Court
公司英語 -----教育訓練部一:常用術語 Hon Hai 鴻海 CMM Component module move 機動元件整合 CEM Contract Manufaction service 合約委托代工 IBSC Internet Business Solution Center 國際互聯網應用中心 PCEG Personal Computer Enclosure group 個人電腦外設事業群(FOXTEQ)CCBG Connector&cable business group CPBG Competition business group ESBG Enterprise system business group 鴻富錦事業群 SABG system assembly business group 系統組裝事業群 NWE Net W ork Enclosure NSE Network system enclosure NSG Network system group NFE Network flexible enclosure Foxcavity = HZ = Hong Zhun 鴻準 Stamping tool shop I 沖模一廠 Stamping tool shop II 沖模二廠 Prototype workshop 樣品中心 Steel factory 裁剪廠 PCE molding tooling workshop PCE塑模廠 Hua Nan test and measurement center 華南檢測中心 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 鎂合金 Engineer standard 工標 Document center (database center)資料中心 Design Center 設計中心 Painting 烤漆(廠) Assembly組裝(廠) Stamping 沖壓(廠) Education and Training教育訓練 proposal improvement/creative suggestion提案改善 Technological exchange and study 技術交流研習會 Technology and Development Committee 技術發展委員會
公司英語 -----教育訓練部 一:常用術語 Hon Hai 鴻海 CMM Component module move 機動元件整合 CEM Contract Manufaction service 合約委托代工 IBSC Internet Business Solution Center 國際互聯網應用中心 PCEG Personal Computer Enclosure group 個人電腦外設事業群(FOXTEQ)CCBG Connector&cable business group CPBG Competition business group ESBG Enterprise system business group 鴻富錦事業群 SABG system assembly business group 系統組裝事業群 NWE Net Work Enclosure NSE Network system enclosure NSG Network system group NFE Network flexible enclosure Foxcavity = HZ = Hong Zhun 鴻準 Stamping tool shop I 沖模一廠Stamping tool shop II 沖模二廠Prototype workshop 樣品中心Steel factory 裁剪廠 PCE molding tooling workshop PCE塑模廠 Hua Nan test and measurement center 華南檢測中心 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 鎂合金 Engineer standard 工標 Document center (database center)資料中心 Design Center 設計中心 Painting 烤漆(廠) Assembly組裝(廠) Stamping 沖壓(廠) Education and Training教育訓練 proposal improvement/creative suggestion提案改善 Technological exchange and study 技術交流研習會 Technology and Development Committee 技術發展委員會 BS Brain Storming 腦力激蕩 QCC Quality Control Circle 品質圈 PDCA Plan Do Check Action 計劃執行檢查總結 DCC delivery control center 交貨管制中心 3C Computer 電腦類產品 Consumer electronics 消費性電子產品 Communication 通訊類產品 Core value(核心价值) Love 愛心Confidence 信心Decision 決心 Corporate culture(公司文化) Integration 融合 Responsibility 責任 Progress 進步 3T STRATEGY Time to market 及時切入生產 Time to volume 及時大量生產 Time to money 及時大量交貨
二:英文縮寫 品質人員名稱類 QC quality control 品質管理人員 FQC final quality control 終點品質管制人員IPQC in process quality control 制程中的品質管制人員OQC output quality control 最終出貨品質管制人員IQC incoming quality control 進料品質管制人員TQC total quality control 全面質量管理 POC passage quality control 段檢人員 QA quality assurance 質量保證人員 OQA output quality assurance 出貨質量保證人員 QE quality engineering 品質工程人員 品質保證類 FAI first article inspection 新品首件檢查 FAA first article assurance 首件確認 CP capability index 能力指數 CPK capability process index 模具製程能力參數SSQA standardized supplier quality audit 合格供應商品質評估FMEA failure model effectiveness analysis 失效模式分析 FQC運作類 AQL Acceptable Quality Level 運作類允收品質水準 S/S Sample size 抽樣檢驗樣本大小ACC Accept 允收 REE Reject 拒收 CR Critical 極嚴重的 MAJ Major 主要的 MIN Minor 輕微的 Q/R/S Quality/Reliability/Service 品質/可靠度/服務 P/N Part Number 料號 L/N Lot Number 批號 AOD Accept On Deviation 特采 UAI Use As It 特采 FPIR First Piece Inspection Report 首件檢查報告 PPM Percent Per Million 百萬分之一 制程統計品管專類 SPC Statistical Process Control 統計製程管制
公司英语 -----教育训练部 一:常用术语 BAIBEI 百倍 CMM Component module move 机动组件整合 CEM Contract Manufaction service 合约委托代工 IBSC Internet Business Solution Center 国际互联网应用中心 PCEG Personal Computer Enclosure group 个人计算机外设事业群(FOXTEQ)CCBG Connector&cable business group CPBG Competition business group ESBG Enterprise system business group 鸿富锦事业群 SABG system assembly business group 系统组装事业群 NWE Net Work Enclosure NSE Network system enclosure NSG Network system group NFE Network flexible enclosure Foxcavity = HZ = Hong Zhun 鸿准 Stamping tool shop I 冲模一厂 Stamping tool shop II 冲模二厂 Prototype workshop 样品中心 Steel factory 裁剪厂 PCE molding tooling workshop PCE塑模厂 Hua Nan test and measurement center 华南检测中心 MPE mobile phone enclosure MPE MBE mobile phone and notebook enclosure 明塑厂 MGE Alloy magnesium alloy enclosure 镁合金 Engineer standard 工标 Document center (database center)资料中心 Design Center 设计中心 Painting 烤漆(厂) Assembly组装(厂) Stamping 冲压(厂) Education and Training教育训练 proposal improvement/creative suggestion提案改善 Technological exchange and study 技术交流研习会 Technology and Development Committee 技术发展委员会 BS Brain Storming 脑力激荡
会议室Meeting Room董事长办公室President’s Office 总经理办公室General Manager's Office 副总经理办公室Deputy General Manager's Office 总工程师办公室Chief Engineer's Office 总工程师Chief Engineer 人力资源部Human Resources Department (缩写)人事部HR Dept. 财务部Financial Department (缩写)财务部Finance Dept. 行政部Administration Department (缩写)Admin Dept. 行政人事部Administration & HR Department (缩写)行政人事部Administration & HR Dept.
如果光是行政部:Administration 人事部:Human Resources 在国外都把这两个概念分开。行政是决定公司或者机构重大问题的部门,我想你多半指的是人事部,因为其实在国外的Human Resources也有调配人员,分配事务的工作。 关于办公部门英文翻译: 管理高层:.总公司:Head Office 董事室: Director's Office 董事长室Chairman's Office 执行董事助理: The assistant of the executive director 总经理室:General Manager Office (总经理室:GM) 财务总监CFO=chief finanical officer 开发部Development Dept. 财务部Finance Dept. 财务部经理Finance Dept. Manager, 人事行政部: The Personnel Administratio Department 人事行政部Personnel & Admin Dept. 秘书室Secretary Room 策划部Planning Dept. 预算部Budget Dept. 市场部Marketing Dept.
外企日常工作中常用的英语术语和缩写语 办公室职员(Office Clerk)加入公司的整个过程为例,引出在跨国公司(MNC-Multi-National Company) 工作中,日常人们喜欢经常使用的术语(Terminology)和缩写语(Abbreviation)。[找工作Job Searching]我立志大学毕业后加入一家跨国公司。我制作了精美的个人简历(Resume, cv)。我参加了校园招聘(Campus Recruitment)。我关注报纸招聘广告(Recruiting Ads)。我也经常浏览招聘网站(Recruiting Website)。我还参加人才招聘会(Job Fair)。 [参加面试Be invited for Interview] 我选择了几家中意的公司,投出了简历。终于接到了人力资源部(Human Resources Department)邀请面试的通知。经过几轮面试(Interview)和笔试(Written Test)我终于接到了XXXX 公司的聘用书(Offer Letter)。这是一家独资/合资企业(Wholly Foreign-Owned Company/Joint-Venture)。 [ 录用条件Employment Terms] 我隶属XX 部门(Department )。我的职位(Position)是XXXX。我的工作职责(Job Responsibilities)是XXXX。我的直接上司(Direct Supervisor)是XXX。我的起点工资(Starting Salary)是XXXX。我的入职日期(Join-Date)是XXXX。我的试 用期(Probation)是3 个月。首期劳动合同(Labor Contract/Employment Contract)的期限(Term)是3 年。 [第一天上班First day of join] 我乘坐公司班车(Shuttle Bus/Commuting Bus)来到公司。先来到人力资源部报到(Register)。我填了一系列的表格(Forms)。我领到了工卡(Badge Card)、餐卡(Meal Card)、员工手册(Employee Manual)、培训手册(Training Handbook)、保险手册(Insurance Handbook)、安全环境健康(EHS-Environment, Health and Safety)手册。公司培训主管(Training Supervisor)为我做了入职培训(Orientation)。我了解了公司的安全须知(Safety Precautions)和紧急疏散通道(Emergency Evacuation Route)。 [部门Department] 我随后来到我的部门,见到了我的部门经理(Department Manager)和同事(Colleagues)。我来到我的办公桌(Desk)前,看到办公用品(Stationery)和台式计算机(DeskTop)已经摆在桌上。经理说以后还会配备笔记本电脑(Notebook/LapTop)。 [午餐Lunch] 中午在公司餐厅(Cafeteria)吃饭,是免费的午餐(Free Lunch)。饭后跟大家一起外出散步。 [第一次会议First meeting] 下午部门开会(Have a Meeting),讨论目前面临的困难和问题(Difficulty & Issues),经理要求大家通过脑力激荡(Brain-Storming),找出问题的根源(Root Cause),并提出解决方案(Solutions)。 [各种类型会议Various meetings] 公司有多种会议。部门经理的管理层会议(Staff Meeting)。讨论项目进展的项目会议(Project Meeting)。讨论预算的预算会议(Budgeting Meeting)。与美国总部的电话会议(Teleconference Call)。还可以利用视频会议系统(Video Conference)或网络会议(Net-Meeting)系统开会。有各种周会(Weekly Meeting)、月例会(Monthly Meeting)、季度会议(Quarterly Meeting)和年度会议(Annual Meeting)。 [各种计划Various plans] 要制定各种计划(Plans)。有长期计划(Long-term Plan)、中期计划(Medium-term Plan)和短期计划(Short-term Plan) 。有周计划(Weekly Plan)、月计划(Monthly Plan )和年度计划(Annual Plan )。有业务计划(Project Plan )、营销计划(Marketing Plan )、销售计划(Sales Plan)、预算计划(budgeting Plan )、项目计划
公司常用英语缩写 General Abbreviation Full Name 中译 AC Alternating Current 交流电 A/C Account 科目 A/P Accounts Payable 应付帐款 A/R Accounts Receivable 应收帐款 ABC Activity Based Costing 作业制成本会计 ABM Activity Based Management 作业制成本管理 ACH Automated Clearinghouse 自动票据交换所 ACH. % Achievement Ratio 达标率 ACT Actual 实际 ACTG Accounting 会计 ADJ. Adjustment 调整 ADM Adminstration 管理 ADR American Depositary Receipt 美国存托凭证 AES Asset & Equipment Management System 资产设备管理体系AF Annual Forecast 年度预测 AMH Automation Material Handling 自动物料处理 AMT Amount 金额/数量 ASP Average Selling Price 平均售价 ASSY Assembly Product 组合产品 ATM Automatic Teller Machine 自动柜员机
AVG Average 平均 AUP Average Unit Price 平均售价 B/L Back Light 背景光源 B/L Bill of Lading 提单 B/S Balance Sheet 资产负债表 BA Bankers Acceptance 银行承兑汇票 BCR Business Card Reader 名片阅读机 BEP Break Even Point 损益两平点 BIOS Basic Input/output System 基本输出入系统BNS Business Management System 经营管理体系BOD Board of Director 董事会 BOM Bill of Material 材料用量清单 Bond Corporate Bond 公司债 BPCS Business Production Control System BPR Business Process Re-engineering 企业流程改造BTO Build To Order 接单后生产 BU Business Unit 事业部 BUD Budget 预算 C.A.P. D. Check, Action, Plan, Do C/D Clock Display 时钟显示器 CAD Computer Aided Design 计算机辅助设计 CAE Computer Aided Engineering 计算机辅助工程
企业常用缩写 5S : 5S管理 ABC : 作业制成本制度(Activity-Based Costing) ABB : 实施作业制预算制度(Activity-Based Budgeting) ABM : 作业制成本管理(Activity-Base Management) APS : 先进规画与排程系统(Advanced Planning and Scheduling) ASP : 应用程序服务供货商(Application Service Provider) ATP : 可承诺量(Available To Promise) A VL : 认可的供货商清单(Approved Vendor List) BOM : 物料清单(Bill Of Material) BPR : 企业流程再造(Business Process Reengineering) BSC : 平衡记分卡(Balanced ScoreCard) BTF : 计划生产(Build To Forecast) BTO : 订单生产(Build To Order) CPM : 要径法(Critical Path Method) CPM : 每一百万个使用者会有几次抱怨(Complaint per Million) CRM : 客户关系管理(Customer Relationship Management) CRP : 产能需求规划(Capacity Requirements Planning) CTO : 客制化生产(Configuration To Order) DBR : 限制驱导式排程法(Drum-Buffer-Rope) DMT : 成熟度验证(Design Maturing Testing) DVT : 设计验证(Design Verification Testing) DRP : 运销资源计划(Distribution Resource Planning) DSS : 决策支持系统(Decision Support System) EC : 设计变更/工程变更(Engineer Change) EC : 电子商务(Electronic Commerce) ECRN : 原件规格更改通知(Engineer Change Request Notice) EDI : 电子数据交换(Electronic Data Interchange) EIS : 主管决策系统(Executive Information System) EMC : 电磁相容(Electric Magnetic Capability) EOQ : 基本经济订购量(Economic Order Quantity) ERP : 企业资源规划(Enterprise Resource Planning) FAE : 应用工程师(Field Application Engineer) FCST : 预估(Forecast) FMS : 弹性制造系统(Flexible Manufacture System) FQC : 成品质量管理(Finish or Final Quality Control) IPQC : 制程质量管理(In-Process Quality Control) IQC : 进料质量管理(Incoming Quality Control) ISO: 国际标准组织(International Organization for Standardization) ISAR : 首批样品认可(Initial Sample Approval Request) JIT : 实时管理(Just In Time) KM : 知识管理(Knowledge Management) L4L : 逐批订购法(Lot-for-Lot) LTC : 最小总成本法(Least Total Cost)
公司常用英语缩写 Abbreviation Full Name 中译 AC Alternating Current 交流电 A/C Account 科目 A/P Accounts Payable 应付帐款 A/R Accounts Receivable 应收帐款 ABC Activity Based Costing 作业制成本会计 ABM Activity Based Management 作业制成本管理 ACH Automated Clearinghouse 自动票据交换所 ACH. % Achievement Ratio 达标率 ACT Actual 实际 ACTG Accounting 会计 ADJ. Adjustment 调整 ADM Adminstration 管理 ADR American Depositary Receipt 美国存托凭证 AES Asset & Equipment Management System 资产设备管理体系AF Annual Forecast 年度预测 AMH Automation Material Handling 自动物料处理 AMT Amount 金额/数量
ASP Average Selling Price 平均售价 ASSY Assembly Product 组合产品 ATM Automatic Teller Machine 自动柜员机 AVG Average 平均 AUP Average Unit Price 平均售价 B/L Back Light 背景光源 B/L Bill of Lading 提单 B/S Balance Sheet 资产负债表 BA Bankers Acceptance 银行承兑汇票 BCR Business Card Reader 名片阅读机 BEP Break Even Point 损益两平点 BIOS Basic Input/output System 基本输出入系统BNS Business Management System 经营管理体系BOD Board of Director 董事会 BOM Bill of Material 材料用量清单 Bond Corporate Bond 公司债 BPCS Business Production Control System BPR Business Process Re-engineering 企业流程改造BTO Build To Order 接单后生产 BU Business Unit 事业部 BUD Budget 预算 C.A.P. D. Check, Action, Plan, Do
二: 英文縮寫 品質人員名稱類 QC quality control FQC final quality control IPQC in process quality control OQC output quality control TQC total quality control POC passage quality control QA quality assurance OQA output quality assurance QE quality engineering 品質保證類 FAI first article inspection FAA first article assurance CP capability index CPK capability process index SSQA standardized supplier quality audit FMEA failure model effectiveness analysis FQC運作類 AQL Acceptable Quality Level
S/S Sample size ACC Accept REE Reject CR Critical MAJ Major MIN Minor Q/R/S Quality/Reliability/Service P/N Part Number L/N Lot Number AOD Accept On Deviation UAI Use As It FPIR First Piece Inspection Report PPM Percent Per Million 制程統計品管專類 SPC Statistical Process Control 品質管理人員 終點品質管制人員 制程中的品質管制人員最終出貨品質管制人員進料品質管制人員全面質量管理 段檢人員 質量保證人員 出貨質量保證人員
外企常用英语及其缩写 FYI abbr. For Your Information 供参考 Background 背景 Conference Call 电话会议 Hey Team! Well that sure was a quick conference call tonight! Aggressive 积极 这是俺们领导表扬和批评人用的:“小X,你最近可是很不aggressive 啊!” Add sb. to loop 这就是说要把谁给绕到圈子里去,有的事知道的人少,这就很不好,应该让多些人知道,于是就把他绕到圈子里去。 Involve 跟上面的意思一样,就是上面的是邮件里面说的,这个是用话说的。需要谁来搀和一下了,就把谁给involve 进来。 Broadcast 这是俺们外企发通知用的,比如“嘿,听说了吗?broadcast说了,食堂要涨价了,原来6块,现在6块6了!” Team 这是俺们生产队,比如开会时别的部门的领导问俺:“你是哪个TEAM的?”;俺就回答说:“俺是龟田小队长那个team的呀,都是皇军的队伍。” CC 这也是缩写,后来才搞明白,就是把邮件塞给你想给看的人。比如,“小X,把这个邮件“塞塞”XX领导!”“领导,这个邮件已经塞给你了!” Push
做工作嘛,困难大了就要推呀,反正这工作来了,俺就得推这个,推那个,一个推一个,往往跟俺家驴推磨似的,推了一圈,还得自己推啊,后来搞明白,咱的推的功夫没有人家高啊! Stake holder 头一次听老美那边讲engineering release methodology的时候,知道的这个词。到目前都没有弄清楚,“项目关系人”和“树桩所有者”怎么联系上的。 San Jose 搞计算机的不能不知道硅谷吧,硅谷就在San Jose这个城市,雅虎老板杨致远也出生在这里。读的时候千万别读成“三教丝”了,这个地方应该读“三候塞”即圣何塞。 ASAP 老美常喜欢用的缩写,as soon as possible Presentation 个人或者部门做演讲的时候喜欢用这个词 Mockup UI部门做在产品开始code之前,在PRD出来之后做出来的模型 Deliver 工程部门发布产品给市场部门,需要经过QA部门检测。也有一些比较仓卒的产品,没有run 过足够的test case,就被发布出去,这些被称为RTU(release to user),呵呵。 Salary 每个月的米 Kick off 足球比赛里面的用词,意为“开球了”。一般喜欢在年末或者季度末开,用来缅怀已经逝去的时间以及展望未来。 On call 如果你在公司供职期间,成功地移民去别的国家比如美国(恭喜!!),如果公司觉得你是一个四化建设的生力军,舍不得你,通常会给你一个on call的职位,可以在家里做soho了。这种事情通常发生在对公司系统异常了解的系统维护人员身上。
2010作业员/线组长文化水平辨识考核-----英文培訓 课程目的 1.能拼写26英文字母 2.能掌握基本单词50个 3.能使用基本问候等句子30个 4.常用英文单词 5.常用英文短句 6.英文字母大小写 7.识别字母形状、认识大小写字母、能够朗诵、8.默写大小写字母 ?大写 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ?小写 a b c d e f g h I j k l m n o p q r s t u v w x y z 学习目标 ?掌握常用英文单词的听、说、读、写。 ?理解和表达有关下列主题的常用单词: 称谓、身体部位、食品、植物、水果、颜色、动 物、教学用具、星体、数字、形容词、公司常用英语 常用英文單詞(1/11) 称谓 ?grandma 奶奶uncle 叔叔sister 姐妹auntie 阿姨 ?brother 兄弟mother 母亲teacher 老师father 父亲 ?student 学生grandpa 爷爷 身体部位、食品 ?ear 耳朵cookie 饼干eye 眼睛bread 面包 ?nose 鼻子sandwich 三明治mouth 嘴巴milk 牛奶 cola 可乐water 水 植物水果 ?flower 花apple 苹果 ?grass 草pear 梨 ?tree 树banana 香蕉 ?orange 桔子 ?grape 葡萄 颜色动物 ?red 紅色dog 狗 yellow 黃色cat 猫 white 白色教学用具 ?blue 蓝色table 桌子 ?green 绿色chair 椅子 ?black 黑色blackboard 黑板 數字 ?one (一) two (二) three (三) four (四) five(五) six (六) seven(七) eight (八) nine(九) ten (十) eleven(十一) twelve(十二) Thirteen(十三) Fourteen (十四) fifteen (十五) sixteen (十六) seventeen (十七) eighteen (十八) nineteen (十九) twenty(二十) thirty (三十) forty (四十) fifty (五十) sixty (六十) seventy(七十) eighty (八十) ninety (九十) hundred (一百) ?Thousand (一千) 星体