当前位置：文档之家 › CAT811MTBIT10中文资料

CAT811MTBIT10中文资料

  • 格式：pdf
  • 大小：98.54 KB
  • 文档页数：9

© 2005 by Catalyst Semiconductor, Inc.Characteristics subject to change without notice1Doc. No. 3005, Rev. R

FEATURESsPrecision monitoring of+5.0 V (± 5%, ± 10%, ± 20%),+3.3 V (± 5%, ± 10%),+3.0 V (± 10%) and+2.5 V (± 5%) power suppliessManual reset inputsOffered in two output configurations:- CAT811: Active LOW reset- CAT812: Active HIGH resetsDirect replacements for the MAX811 andMAX812 in applications operating over theindustrial temperature ranges Reset valid down to VCC = 1.0 Vs 6 µA power supply currents Power supply transient immunitys Available in SOT-143 packages with Sn orNiPdAu Green Lead finishes.s Industrial temperature range: -40°C to +85°CAPPLICATIONSsComputerssServerssLaptopssCable modemss Wireless communicationssEmbedded control systemssWhite goodssPower meterssIntelligent instrumentssPDAs and handheld equipmentPIN CONFIGURATIONTHRESHOLD SUFFIX SELECTORNominal ThresholdThreshold SuffixVoltageDesignation4.63VL4.38VM4.00VJ3.08VT2.93VS2.63VR2.32VZ1243GNDRESETVCCMRCAT811CAT812CAT811, CAT8124-Pin Microprocessor Power Supply Supervisors with Manual ResetDESCRIPTIONThe CAT811 and CAT812 are microprocessorsupervisory circuits that monitor power supplies. TheCAT811 and CAT812 are direct replacements for theMAX811 and MAX812 in applications operating over theindustrial temperature range; both have a manual resetinput.

These devices generate a reset signal, which is assertedwhile the power supply voltage is below a preset thresholdlevel and for at least 140 ms after the power supply levelhas risen above that level. The underlying floating gatetechnology, AE2(TM) used by Catalyst Semiconductor,makes it possible to offer any custom reset thresholdvalue. Seven industry standard threshold levels areoffered to support +5.0 V, +3.3 V, +3.0 V and +2.5 Vsystems.

The CAT811 features a RESET push-pull output (activeLOW) and the CAT812 features a RESET push-pulloutput (active HIGH).

Fast transients on the power supply are ignored and theoutput is guaranteed to be in the correct state at Vcc

levels as low as 1.0 V.

The CAT811/812 are fully specified over the industrialtemperature range (-40°C to 85°C) and are available ina compact 4-pin SOT143 package.

元器件交易网www.cecb2b.comCAT811, CAT812

2Doc. No. 3005, Rev. R© 2005 by Catalyst Semiconductor, Inc.Characteristics subject to change without notice

ORDERING INFORMATIONPIN DESCRIPTIONSPin NumberCAT811CAT81211GNDGround2—RESETActive LOW reset. RESET is asserted if VCC falls below the reset thresholdand remains low for at least 140ms after VCC rises above the reset threshold.

—2RESETActive HIGH reset. RESET is asserted if VCC falls below the resetthreshold and remains high for at least 140ms after VCC rises abovethe reset threshold.

33MRManual Reset Input. A logic LOW on MR asserts RESET. RESET remainsactive as long as MR is LOW and for 140ms after MR returns HIGH. Theactive low input has an internal 20kΩ pull-up resistor. The input should be leftopen if not used.

44VCCPower supply voltage that is monitored.

Name Description

TOP MARKINGNotes1)The “YM” in the SOT-143 package marking indicates the Yearand Month of production.2)All NiPdAu devices will be marked to indicate product type andpackage. Threshold and full part numbers will be provided on boxand reel labels as well as all Shipping documents.

PrefixDevice #Suffix811STBI

GT10

Device Type811: Push-Pull / Active Low Output812: Push-Pull / Active High Output

CATTrip Level L: 4.63V M: 4.38V J: 4.00V T: 3.08V S: 2.93V R: 2.63V Z: 2.32V

Company ID Package Type

EUS: 4 pin SOT-143 TBI: 4 pin SOT-143 Green

Parts per Reel T3: 3K units T10: 10K units GT3: 3K units (NiPdAu Lead Finish)* GT10: 10K units (NiPdAu Lead Finish)*

dnastraPdlohserhT341-TOS)1(341-TOSnSneerGdaeLettaMhsiniF)2()1(341-TOSneerGdaeLuAdPiNhsiniF)2()1(

8TAC11LMYMAMYHD

EMYR8TAC11MMYNAMYJDJ118TACAMYZMYKCT118TACMYPAMYLDS118TACMYQAMYMDR118TACMYRAMYNDZ118TACAMYYMYPCL218TACMYSADMYR

EMYSM218TACMYTADMYTJ218TACMYUADMYUT218TACMYVADMYVS218TACMYWADMYWR218TACMYXADMYXZ218TACMYICMYYC

The device shown in the examples (CAT811STBI-GT10) has an Active Low, Push-Pull output; a trip levelof 2.85V to 3.00V and is provided in the Green SOT-23package with a NiPdAu lead finish on tape and reelwith 10,000 units.

* NiPdAu is a Lead Finish Option on the GreenPackages only. Unless indicated with the “G” greenpackages are shipped with a Sn Matte Lead Finish.

元器件交易网www.cecb2b.com

合集下载

CZ8111中文资料

CZ8111中文资料


Input VSWR
3.0 2.0 1.0
Stop 400 MHz Start kHz
Output VSWR
Stop 400 MHz
Legend
+25 ºC
+70 ºC - - - - - - 0 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532
10/27/04
Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, Pa. 19154 · PH (215) 464-4000 · Fax (215) 464-4001
元器件交易网
RF AMPLIFIER MODEL CZ8111
Features
! ! ! ! Medium Gain: 15 dB Typical Low Noise Figure: 2.8 dB Typical Operating Temp. 0 ºC to +70 ºC Environmental Screening Available
Specifications
CHARACTERISTIC Frequency Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) In Out Noise figure (dB) Power Vdc mA VSWR TYPICAL Ta= 25 ºC kHz - 400 MHz 15 -2 -17 <1.6:1 <1.2:1 2.8 +1.8 10 MIN/MAX Ta = 0 ºC to +70 ºC kHz - 400 MHz 13 Min. -3 Min. -16 Max. 3.0:1 Max. 3.0:1 Max. 3.5 Max. +1.8 15 Max.
TCC081E数据手册V1.1

TCC081E数据手册V1.1

保密等级公开Q/DX 青岛鼎信通讯股份有限公司技术文档Q/TC X.XXX.XXXXXTCC081E数据手册V1.12014- 05-13发布2014- 05 - 13实施目次1 概述 (1)2 芯片特点 (1)3 芯片框图 (2)4 引脚定义 (2)4.1 芯片引脚示意图 (2)4.2 引脚定义 (3)5 芯片电器参数 (4)5.1 工作电压范围 (4)5.2 最大绝对额定值 (TA = 25°C) (4)5.3 外部复位 (4)6 芯片封装图 (5)7 注意事项 (5)TCC081E数据手册1 概述青岛鼎信通讯股份有限公司根据目前国内载波抄表市场需求，结合电网特点研发出专门应用于电力线通信介质的载波通信系统。

其核心技术利用正交码进行数据扩展频谱传输，使用电力线过零分时段得到最利于传输的3.3ms微分时段同步传输，比单纯使用扩频方式的系统通信能力和稳定性有很大提高；内置DSP数字信号处理模块保证载波通信计算需求，使用A/D采样方式进行扩频计算，其抗干扰能力大大增加。

TCC081E芯片是鼎信电力线载波通信系统中的从节点芯片，实现了基于电力线通信网络的电子终端设备之间可靠的数据交换，具备通信中继能力，可自动实现载波节点侦听、主动上报等网络功能。

TCC081E芯片的应用主要集中在自动读表、路灯控制、智能控制等领域，为电力行业或其它公共事业部门提供了一种优秀的自动抄表、控制系统解决方案。

TCC081E芯片进行鼎信规约的电力载波信号和标准DL/T645-1997/2007协议的串口信号之间的转换，支持数据透明传输模式；串口可以连接电表节点和电量显示模块，完成物理层、数据链路层、网络层、传输层四层网络功能。

2 芯片特点采用BFSK调制的扩频通信技术，载波中心频率421kHz；微分交流电时段，选择最有利于传输的时段通信；高性能数字信号处理技术；高效的帧中继转发机制，支持16级中继级别；可编程的网络地址、地址过滤、提供有效的本地访问数据；接收信号强度权重参数指示，为中继搜索算法提供支持，提高通信系统稳定性；提供准确的节点相位信息及信道特征信息；自适应50Hz、60Hz用电环境；支持断电无过零情况下的电力线载波通讯；每相载波通信速率50bps、100bps、600bps、1200bps；支持串口通信速率1200bps、2400bps、4800bps、9600bps；支持DL/T645-1997/2007、透明传输模式；上电自动读取从节点地址；登录未知表号电能表的表号；事件快速上报功能；采用5V 电源供电；温度适用范围(工业级标准) －40℃～＋85℃。

gt810g光猫说明书

gt810g光猫说明书

gt810g光猫说明书第一章：产品概述1.1产品介绍GT810G光猫是一款高性能的光纤终端猫，可以实现光信号的接收和传输，以及数据的解码和网络接入功能。

该光猫具有稳定可靠的性能，适用于各类网络接入环境。

1.2产品特点(1)高速传输：支持原装光模块，提供高速、稳定的网络传输。

(2)多端口设计：具备多个网络接口，可以同时满足多台设备的联接需求。

(3)简单安装：提供简单易用的安装程序，简化用户的设置流程。

(4)高度兼容性：兼容主流的光纤网络，可以适配各种网络环境。

(5)大容量存储：具备大容量的存储空间，支持用户自定义设置和数据备份。

第二章：安装与设置2.1准备工作在安装之前，请确保已经完成以下准备工作：(1)获取一根光纤连接线。

(2)确认网络供应商已经配置好相应的网络接口和参数。

(3)确保具备一台可用的电脑。

2.2硬件连接(1)将光纤连接线的一端插入GT810G光猫的光纤口，并固定好连接线。

(2)将光猫的另一端连接到网络供应商提供的接口。

2.3软件设置(1)打开电脑，并连接光猫和电脑。

(2)打开浏览器，输入指定的IP地址，并进入光猫管理界面。

(3)根据网络供应商的要求，进行相应的设置，包括PPPoE账号、IP地址等参数。

(4)保存设置，并重启光猫，等待联网成功。

第三章：用户界面介绍3.1系统概况在系统概况界面中，可以查看光猫的各项参数和状态信息，包括连接状态、WAN口状态等。

3.2安全设置在安全设置界面中，可以设置登陆光猫管理界面的密码，以及查看和修改黑名单等安全相关选项。

3.3网络设置在网络设置界面中，可以进行IP地址设置、DNS服务器设置、MAC地址绑定等操作，以适应不同的网络环境。

3.4WIFI设置在WIFI设置界面中，可以设置无线网络的名称、密码、加密方式等，以及查看连接的设备列表和信号强度。

3.5系统工具在系统工具界面中，可以进行诊断工具的运行、固件升级、备份还原等操作，以保障光猫的正常运行。

MT7681数据手册

MT7681数据手册

Document Revision HistoryTable of ContentsDocument Revision History (2)Table of Contents (3)1System Overview (4)1.1General Descriptions (4)1.2Features (4)1.3Applications (5)1.4Block Diagram (5)2Product Descriptions (6)2.1Pin Layout (6)2.2PIN Description (7)2.3Strapping option (9)2.4Package Information (10)2.4.1QFN Packaging (10)2.5Ordering Information (12)3Electrical characteristics (13)3.1Absolute maximum rating (13)3.2Recommended operating range (13)3.3DC characteristics (13)3.4Thermal characteristics (13)3.5Current consumption (14)1 System Overview1.1 General DescriptionsThe MT7681 is a highly integrated Wi-Fi SoC(system on Chip) single chip, which supports IEEE802.11b/g/n single stream, providing GPIO and PWM for intelligent control, and UART, SPI, and I2C interfaces for device communication.The MT7681 integrate power amplifier, low noise amplifier, and RF switch to reduce the module size and RF design capability required. And also integrate power manage unit for single 3.3V power source for cost effective design.The MT7681 embedded 32-bit RISC MCU for 802.11b/g/n drivers, supplicant, TCP/IP protocol stack, and networking applications, can be operated in station mode and softAP mode. The MT7681 is an ideal solution for embedded device to enable networking service with minimized design effort.All the features are available in compact 40pin, 5x5mm QFN package.1.2 FeaturesSingle stream IEEE 802.11 b/g/n32-bit RISC microprocessor as the host MCUEmbedded IEEE 802.11b/g/n drivers, supplicant, and TCP/IP stackHighly integrated RF PA, LNA, and RF switchIntegrate high efficiency switching regulator for single 3.3V power sourceSecurity support for WFA WPA/WPA2 personal, WPS2.0, WAPIOperation in station mode or softAP modeRich interfaces, UART, SPI, I2C, PWM and GPIOsAll functions integrates in compact 5mm x 5mm QFN40L packageUART interface1.3 ApplicationsHome automationSmart plugLightingMeteringRemote controlNetwork consumer devices1.4 Block DiagramRF_INRF_OUTPGPIO/LED RF_OUTNFigure 1 MT7681 block diagram2Product Descriptions2.1Pin LayoutB G _E X T RR F _L D OR F _L D OX T A L _X IX T A L _X OR F _L D OP L L _L D OV D D 33V D D 12G P I O 0GPIO1 GPIO2 GPIO3 GPIO4UART_TX UART_RX LDO_RST_N PMU_PHASE PMU_V33 PMU_COMPF L C L K V D D 12G N D G N D G N D G N D P M U _12V P M U _V 15A P M U _V 33P M U _F BFigure 2 Top view of MT7681 QFN pin-out.2.2 PIN DescriptionTable 1 Pin descriptions2.3 Strapping optionTable 2 Strapping option2.4 Package Information 2.4.1 QFN PackagingFigure 3 Package outline drawing2.5 Ordering InformationTable 3 Ordering information 2.6 TOP Marking InformationFigure 4 Top marking3 Electrical characteristics3.1 Absolute maximum ratingTable 4 Absolute maximum ratings 3.2 Recommended operating rangeTable 5 Recommended operating range 3.3 DC characteristicsTable 6 DC description3.4 Thermal characteristicsNote:[1] Air flow condition: Natural convection. 0.5m/s.[2] PCB dimension 21mm x 11mm. 4-layer.[3] 5mm x 5mm QFN40L packageTable 7 Thermal information3.5 Current consumptionNote: All result is measured at the antenna port and VDD33 is 3.3VTable 8 WLAN 2.4GHz Current Consumption。