公司在验货时发现包袋质量问题用英文简单描述细.
- 格式:doc
- 大小:39.00 KB
- 文档页数:3
我公司在验货时发现包袋质量问题用英文简单描述细节的写法;
拉杆不够滑畅 No smooth enough of trolley system
车轮松动 Bad quality of wheel
轮子不转动 No working of wheel
LOGO牌不洁 Logo no clean
LOGO牌刮花 Scratched logo
包装胶袋小 No big enough of polybag/polybag too small
漏放天地盖 Missing cover board(up & down)
漏放防潮珠 Missing silica gel
吊牌吊错 Wrong hangtag / no the correct hangt.ag (red/black)
针距太长 Bad stitching / distance of stitching is too long
吊袋毛边 Bad making of hanging pocket
吊袋包边倒针不牢 End/bad stitching of hanging pocket
条码错误 Wrong barcode
手把不牢固 Bad making of handle
车线不直 Bad stitching
包装不好 No good packing
清洁不好(油污、线头) Dirt on material(oil and thread)
外箱尺寸不够高 No enough height of export carton
外箱印刷字体不清楚 No clear print of export carton
箱唛上漏填箱号 Missed carton No.
外箱打包带用铁片接口 Security band w / metal / clip
前袋盖魔术帖的位置与袋口不对称 Wrong position of velcro at front panel
拉练尾绳烧烫不好 No good end-marking of puller string
手挽织带车
前后扶车钱不重叠 Bad stitching of handle P.P w/ body material
袋口包边反折不平
Bad end binding
布料色差 Color different of material 线头没剪干净 Drop tear uncut thread
不干胶贴歪 Wrong sticker position at export carton
不干胶盖住箱唛 Sticker covered shipping Mark
箱唛上印错英文字母 Wrong printing of shipping Mark
丝印颜色不对 Wrong screen print color
丝印不好 Bad quality of screen print
拉练尾塑胶脱落 Easy to pull down the puller stopper
侧周与前后幅色差 Color different of body material & gusset material
车工不好 Bad workmenship
铆钉开花不良 Bad pouch of nail
肩带尺寸不够长 The length of shoulder belt is too short,it should be__cm
脚钉松动 No tight enough of nail
塑胶配件材质不良 Easy break of plastic Acc
外箱上正唛贴纸贴在右下角,正确应在箱唛中间
Sticker should be center of export carton No the right corner of bottom
活动底板PVC胶皮电压口和周边不平齐 Bad end-making of PVC Board
边织袋身接头太多(绳纸带) Bad end making of straw
看:See 朝前地:Frontward
以上:Above 意见:Comment
箱子歪角 No good standing of trolley / of pilot case
袋子手挽有长短 No the same drop length of handle
编织带有折痕 Folded P.P Webbing
手工不好 Bad workmenship
吊牌没有过胶 Hangtag without coating
前袋拉链车得不直 Bad making of zip(too rude) no straigtht enough
压扣太松 Easy to move of nail
包装入胶时袋子不可折叠,要平放
Wrong packing, its flat-packed, not folded-packed
外箱颜色填错,应为单色 Wrong print of shipping mark”asscorted color”,should be “solid color”
外贸担保出货 Supplier ship this order w /L/G 下次不可有此问题产生 No more happen from next order
从后来订单开始更正 To fix the problems from next order
外箱的填写部位为手写体 Shipping mark with hand writing
翻工后才可出货 Can ship the order after repairing
纸箱材质差 Bad quality of carton (too soft)
按钮锁开关不良 No good guality of lock
内里色差 Color difference of lining
袋子整理不平 Rude packing
前袋拉链车得不直 Bad making of zip (too rude)
袋身编织接口太多 Bad end-making of straw
外箱没印箱唛 Missing shipping mark
电压 Hot-seal
LOGO电压不清楚 No clear print of logo
LOGO(塑胶)车线不好 Bad stitch of logo
前袋包边破 Broken binding (front pocket)
前袋内文件破 Broken binding (organizer)