®User ManualFeatures• Utilizes a CREE XM-L2 U2 LED • Maximum output up to 920 lumens• Integrated metal micro textured reflector for optimal peripheral illumination• Boasts a peak beam intensity of 9,000 cd and a throw distance of up to 190 meters • Tail switch designed for tactical applications• Side switches for brightness levels and modes adjustment • Features intelligent memory effect• Red LED provides constant/flashing illumination• Displays battery voltage with red light (accurate to 0.1V)• High efficiency constant current circuit enables maximum runtime of 170 hours • Direct access to turbo/red light mode• Reverse polarity protection prevents damage from incorrectly inserted batteries • Stainless steel titanium-plated two-way clip• Toughened ultra-clear mineral glass with anti-reflective coating • Robust HAIII military grade hard-anodized• Waterproof in accordance with IPX-8 (two-meter submersible)• Tail stand capabilityDimensionsLength: 3.59” (91.2mm)Head Diameter: 1” (25.4mm)Tail Diameter: 1” (25.4mm)Weight: 2.01oz (57g)(without battery)Thanks for purchasing NITECORE!SYSMAX Industry Co., Ltd.TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: *****************Web: Address ： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,Guangzhou, China 510600Battery OptionsThe All-Round Flashlight ExpertBrightness LevelsWhen the MT10C is switched on, press the step-up switch repeatedly to switch from the following brightness levels: red beacon-red light-ultralow-low-medium-high-turbo. The MT10C has memory effect. When it is switched on, the MT10C will enter the brightness level last used.When the MT10C is switched on, press the step-down switch repeatedly to lower its brightness until red beacon mode, after which there is no cycling back to other brightness levels.Direct Access to Red Light Mode:When the MT10C is switched on, press and hold the step-down switch for over one second to access the red light mode; OR:When the MT10C is switched off, press and hold the step-down switch and press the button on the tailcap to access the red light mode.Direct Access to Turbo:When the MT10C is switched on, press and hold the step-up switch for over one second to access turbo output (920 lumens); OR:When the MT10C is switched off, press and hold the step-up switch and press the button on the tailcap to access turbo output (920 lumens).Note: After three minutes' using of turbo mode, the flashlight will lower its output automatically to prevent overheating, and efficiently ensure the battery runtime.Special modes (Strobe/Location/SOS)With the light switched on, press both side switches to enter strobe mode. When in strobe mode, press both side switches again to cycle through Location Beacon, SOS, and Strobe modes. To exit and resume the brightness level last used, simply press the step-up or step-down switch. The MT10C has memory effect in strobe mode. If it is turned off in strobe mode, it will enter strobe mode immediately when switched on again.Power TipsWith the light switched off, press both side switches and the button on the tailcap to activate the red power indicator to blink and indicate battery voltage (accurate to 0.1V). For example, when battery voltage is at 4.2V, the red power indicator will blink 4 times, followed by a one second pause and another 2 blinks. Different voltages represent the corresponding remaining battery power levels.AccessoriesHolster, clip, lanyard, spare tailcap cover, spare O-ringNOTICEThe stated data has been measured in accordance with the international flashlight testingstandards ANSI/NEMA FL1, using one high quality IMR18350 Li-ion battery (3.7V, 700mAh) or Operating InstructionsBattery InstallationInsert one CR123 or IMR18350 battery as illustrated.WARNING1. Ensure batteries are inserted with the positive (+) end pointing towards the head. The MT10C will not be operational with incorrectly inserted battery.2. Please stop using and remove a depleted IMR18350 battery to avoid potential battery damage.Momentary IlluminationMomentary illumination can be achieved by switching theMT10Cflashlight off and holding the tail switch halfway down. Releasing switch turns the light off.On / Off OperationTo switch ON: Press the button on the tailcap all the way down until a click is heard.To switch OFF: Press the button on the tailcap all the way down once again until a click is heard.Standby Mode:When power is off, pre ss both side switches and the button on the tailcapsimultaneously to activate the red power indicator to flash and indicate battery voltage. Three seconds after electrical voltage is reported, the MT10C enters standby mode where the indicator flashes once every three seconds. In standby mode, the MT10C will operate for approximately six months with the indicator on .Low Power Full Power3.2V2.4V2.8V3.0VLow PowerFull PowerIMR18350:CR123:Changing / Charging BatteryBattery should be replaced or recharged when output appears to be dim or the flashlight becomes unresponsive.MaintenanceEvery 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.Warranty ServiceAll NITECORE® products are warranted for quality. Any defective / malfunctioningNITECORE® product can be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.The warranty is nullified in all of the following situations:1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.2. The product(s) is/are damaged through improper use.3. The product(s) is/are damaged by leakage of batteries.For the latest information on NITECORE® products and services, please contact a local NITECORE®**********************************************※All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurs between this manual and information specified on, information on our official website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.Please find us on facebook: NITECORE Flashlights20151021。
LUMENS1350LUMENS2800LUMENS550LUMENS4015min 2h15min 45min 30h289m (Beam Distance)21,000cd (Peak Beam Intensity)IPX-8, 2m (Waterproof AND Submersible)1.5m (Impact Resistant)1×18650®User ManualFeaturesUtilizes a CREE XHP70 LEDDriven by a dedicated IMR 18650 battery to emit up to 2,800 lumens brightness Ultra-bright dual-mode tactical blazeDual-switch tail cap designed for tactical use and easy application Mode 1 Suppressing light: Direct access to turbo modeMode 2 STROBE READY TM: Direct access to Strobe Mode (Chinese Patent:201320545349.4) Four easily accessible brightness levels and memory function for fast boost Maximum beam intensity up to 21,000cd Extensive runtime up to 30 hours 289 meters far throwIntegrated metal micro textured reflector for optimal peripheral illuminationA power indicator LED hidden in the tail switch indicates battery power (Chinese patent: ZL201220057767.4)Electric reverse polarity protection Temperature regulation and protection Anti-rolling designToughened ultra-clear mineral glass with anti-reflective coating Constructed from aero grade aluminum alloy Robust HAIII military grade hard-anodizedWaterproof in accordance with IPX-8 (two meters submersible)DimensionsLength: 6.25” (159mm)Head Diameter: 1.57”(40mm)Tail Diameter: 1.18” (30mm)Weight: 7.52oz (213g)(without battery)Accessories1xNI18650D dedicated battery (for TM03 only), O-ring, holster *The dedicated NI18650D battery can be purchased seperately.Battery TypeThe TM03 uses a dedicated Nitecore IMR 18650 Li-ion rechargeable battery.Brightness & RuntimeThanks for purchasing NITECORE!The All-Round Flashlight ExpertOperating InstructionsBattery InstallationInstall a dedicated IMR 18650D battery with the positive end pointing inward.Note: The tail cap indicator LED will blink to indicate battery power upon battery installation. Please refer to Power Tips for details.Tactical Momentary IlluminationPress the tail switch partway to turn on the flashlight, and release to turn it off.On/Off OperationTo turn the TM03 on, press the tail switch until a “click” is heard. To turn the TM03 off, press the tail switch again until a “click” is heard.Brightness LevelsWith the TM03 turned on, press the MODE switch to cycle through power levelsLow-Medium-High-Turbo. The TM03 has memory for brightness levels. When it is switched on, the TM03 will enter the brightness level last used.Mode SelectionThe TM03 has two special modes: Suppressive Light mode (Mode 1) and STROBE READY™ mode (Mode 2). To switch between these modes, follow the procedure below: Step 1: With the TM03 turned off, remove and replace the battery;Step 2: Within 60 seconds of completing step 1, tighten the TM03's tail switch while pressingTM03SYSMAX Industry Co., Ltd.TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: *****************Web: Address ： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,Guangzhou, China 51060020160606Please find us on facebook: NITECORE Flashlightsand holding the MODE switch;Step 3: Upon completing step 2, the mode will be indicated as follows: : one flash whenSuppressive Light mode (Mode 1) is selected, and two flashes when STROBE READY TMmode (Mode 2) is selected.Note: Mode selection will be unavailable when battery voltage is below 3.7V.Suppressing Light Mode (Mode 1)Direct access to turbo: In any setting of the TM03, including power-off, press and hold the MODE switch for over 0.2 second to access turbo brightness, and release to resume previous setting.Quick access to strobe: In any setting of the TM03, including power-off, press the MODE switch twice in quick succession to access strobe mode, and press again to resume previous setting.STROBE READY TM Mode (Mode 2)Direct access to strobe: In any setting of the TM03, press and hold the MODE switch for over 0.2 second to access strobe mode, and release to resume previous setting.Quick access to turbo: In any setting of the TM03, press the MODE switch twice in quick succession to access turbo mode, and press again to resume previous setting.Temperature Regulation and ProtectionThe TM03 features temperature regulation and protection. It automatically monitors its internal temperature in high and turbo levels. When its body temperature is higher than 50°C, the TM03 will automatically lower its brightness. When its body temperature drops below 50°C, the TM03 will gradually increase its brightness to high level.Power TipsUpon battery installation, the red power indicator LED in the tail switch will blink to indicate battery power:1. Three blinks indicate power levels above 50%;2. Two blinks indicate power levels below 50%;3. One blink indicates power levels below 10%.Changing BatteryWhen the battery power is insufficient, the output appears to be dim or the flashlight becomesirresponsive. When the battery is close to depletion, the main LED will flicker until it completely goes off. In either condition, the battery should be replaced.Precautions1. Do not install a battery with polarity reversed. Otherwise the TM03 could not work.2. In Mode 1, after several consecutive turbo boosts, the battery voltage may be insufficient for further turbo boosts. This is considered normal.3. Installing ordinary 18650 Li-ion batteries or other IMR 18650 batteries will compromise some functions of the TM03.4. Charge the NI16850D battery dedicated to TM03 with Nitecore chargers or other qualified and authentic chargers only.5. Ensure the positive polar of the NI16850D battery dedicated to TM03 is in full contact with charger’s pins when charging. Otherwise the charging can fail, or the battery will go short-circuit.6. The standby time for the TM03 is approximately one year.7. Do not direct beam into eyes as doing so can damage vision.8. Keep small parts in the package away from children to avoid choking.9. Do not dismantle, remodel or handle the TM03 in any improper way. Doing so will void your warranty.Warranty DetailsOur authorized dealers and distributors are responsible for warranty service. Should any problem covered under warranty occurs, customers can contact their dealers or distributors in regards to their warranty claims, as long as the product was purchased from an authorized dealer or distributor. NITECORE’s Warranty is provided only for products purchased from an authorized source. This applies to all NITECORE products.Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning NITECORE® products can be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties, or damaged by batteries leakage.For the latest information on NITECORE® products and services, please contact a local NITECORE® **********************************************.※All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurs between this manual and information specified on . Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.00NOTICEThe above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 1x Nitecore NI18650D (3.6V, 11.2Wh, dedicated for TM03 only) battery under laboratory conditions. The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.The Turbo mode of the TM03 WILL NOT be operational when powered by other standard 18650, IMR18650 or CR123 batteries.。
Page 1 of 4Effective Jan 2023 (New Items in Red)2701 West Court Street / Pasco, Washington 99301 ********************************************OF00003 Pilot 1212020RevAABRTS INFORMATIONPROVIDER: Account #: RTS: Phone:PO: Ordered By: Email :Email: SHIP TO INFORMATIONMark For: User Weight: Name: Ship Via:TiLite Sales Rep:Address : TiLite Information:Promo Code: City: State: Zip:Ship Date:Order #:Phone:Fax:****************************************************************************************.586.2413TPFS1 ❑ TiLite Pilot INCLUDING Growth Kit (Full Adjustability. Seat Width A grows 2” and Seat Depth B grows 3”.) 120 Pound Weight Limit. Price includes one-time growth kit and Transit Tie-Down option. Additional growth kits sold separately.)$3640 E1235 TPFS2❑ TiLite Pilot OMIT Growth Kit$3380 E1235TPMAXSD1 ❑ Permobil Smart Drive MX2+ (N/A with rear seat heights less than 13.5”, or 20” rear wheels) $7529E0986TPMAXSD18 ❑ SwitchControl Buttons NCOTPMAXSD13 ❑ NEW PushTracker E3 (Not required) $51 TPMAXSD8 ❑ SwitchControl Button with Mono Jack Option $159TPMAXSD19 ❑ NEW Buddy Button $262TPMAXSD4 ❑ Carrying Bag $84 TPMAXSD10 ❑ Universal Padded Handle $22*SmartDrive apps available on Watch OS (Apple Watch Series 5 or newer).TPWTB ❑ Transport Brackets (Consists of four Tie-Down Brackets.)NCO TPTTDO ❑ Transit Tie-Down (Tested to WC-19. R efer to the Transit Tie-Down Option Brochure for important information regarding the Transit Tie-Down options. WC-19 Tie-Down Brackets require the TiLIte back and head support. 95 lb weight limit. Transit Option is not available withuser weight less than 50 lbs )$271❑ TPFF29 Neon Pink ❑ TPFF14 Ocean Blue Metallic❑ TPFF30 Acid Green Metallic❑ TPFF25 Electric PlumSTD(Color Anodize Package includes: Caster Mount, Caster Fork, and Caster Caps. If no anodize color is selected, the default will be black.)❑ ZANO1 Black STD ❑ ZAN12 Gold ❑ ZAN15 Green ❑ ZAN13 Purple ❑ ZAN14 Orange ❑ ZAN10 Blue ❑ ZAN11 Red……………….. NCOFRONT SEAT TO FLOOR HEIGHT, REAR SEAT TO FLOOR HEIGHT, CENTER OF GRAVITY AND SEAT TO FOOTREST Please see the table below for available configuration adjustment ranges. Center of gravity will be set at the factory. See documentation shipped with chair for detailed information on adjustments.20” REAR WHEEL 22” REAR WHEEL 24” REAR WHEEL SEAT DEPTH MEASUREMENT:AVAILABLE RANGE (IN): AVAILABLE RANGE (IN):AVAILABLE RANGE (IN):9” FRONT SEAT HEIGHT 12.5-15 N/A N/A REAR SEAT HEIGHT 12-13.5 N/A N/A CENTER OF GRAVITY 0.5-1.5 N/A N/A 10” FRONT SEAT HEIGHT 12-15 N/A N/A REAR SEAT HEIGHT 12-13.5 N/A N/A CENTER OF GRAVITY 0.5-2.25 N/A N/A 11”FRONT SEAT HEIGHT 12-15 13.5-16.5 14-16.5 REAR SEAT HEIGHT 12-13.5 13-15 13.5-16 CENTER OF GRAVITY0.5-3 0.5-2.25 0.5-2.2512”FRONT SEAT HEIGHT 12-15 13.5-16 14-16.5 REAR SEAT HEIGHT 12-13.5 13-15 13.5-16 CENTER OF GRAVITY 0.5-3.50.5-3.25 0.5-3.2513”FRONT SEAT HEIGHT N/A 13-16 13.5-16.5 REAR SEAT HEIGHT N/A 13-15 13.5-16 CENTER OF GRAVITYN/A0.5-3.50.5-3.5Effective Jan 2023 (New Items in Red)Page 2 of 5 DCE15”FRONT SEAT HEIGHT N/A 13-16 13.5-16.5 REAR SEAT HEIGHT N/A 13-15 13.5-15.5 CENTER OF GRAVITYN/A 1.5-3.5 1.5-3.5SEAT WIDTH A Measure inside width from side panel to side panel. Seat width grows 2” if selected width is between 8” and 12”. The 13” width will grow a maximum of 1”, and the 14” width will not grow any wider. Refer to chart for seat depth availability.TPSW1 ❑ 8” ❑ 9” ❑ 10” ❑ 11” ❑ 12” ❑ 13” ❑ 14” STDSEAT DEPTH RANGE: The seat depth can be grown within the selected range. ❑ 9”-12” ❑ 11”-15”STDSEAT DEPTH B Measure from front of seat pan to front of back support cushion. TPSD1 ❑ 9” ❑ 10” ❑ 11” ❑ 12” ❑ 13” ❑ 14” ❑ 15”STDFRONT SEAT HEIGHT C Measure from the floor to the top edge of the front of the seat pan. Adjustable in 0.5” increments. TPFSH1 ❑ 12” ❑ 12.5” ❑ 13” ❑ 13.5” ❑ 14” ❑ 14.5” ❑ 15” ❑ 15.5” ❑ 16” ❑ 16.5” STDREAR SEAT HEIGHT D Measure from the floor to the top edge of the of the seat pan at the intersection of the front of the back support pad and the seat pan. Adjustable in 0.5” increments.TPRSH1 ❑ 12” ❑ 12.5” ❑ 13” ❑ 13.5” ❑ 14” ❑ 14.5” ❑ 15” ❑ 15.5” ❑ 16” ❑ 16.5” STDFOOTREST TYPE TPFTR3 ❑ Angle Adjustable Footrest STDTPFTR24 ❑ Flip-Back Depth and Angle Adjustable Footrest (Not available on 8”, 9” or 14” seat width) $233 K0040SEAT TO FOOTREST E Measure from the top of the footplate to the front of the seat pan. For an angle adjustable footrest, thismeasurement must be at least 2” less than front seat height. For a Flip-Back Depth and Angle Adjustable footrest, this measurement must be at least 3” less than front seat height.❑ 3” ❑ 3.5” ❑ 4” ❑ 4.5” ❑ 5” ❑ 5.5” ❑ 6” ❑ 6.5” ❑ 7” ❑ 7.5” ❑ 8” ❑ 8.5” ❑ 9” ❑ 9.5” ❑ 10” ❑ 10.5” ❑11” ❑ 11.5” ❑ 12” ❑ 12.5” ❑13” ❑13.5” ❑14” ❑14.5” STDCOMFORT BACK SUPPORTS (WC-20 certification for integrated hardware is pending testing. Cane mounted hardware is WC-20 certified.)TPSB4 ❑ ACTA-BACK ® Back Support (Available on 12” to 14” seat widths)Back support length: ❑ 10” ❑ 12” ❑ 14 $616 E2613 TPSB5 ❑ ACTA-EMBRACE ® Back Support (Available on 10” to 14” seat widths)Back support length: ❑ 10” ❑ 12” ❑ 14” $642E2613Comfort Back Options:TPCHD1 Backrest Mounting Hardware Options: ❑ Integrated Compass Hardware ❑ Cane Mount HardwareTPFAB1 Cover Fabric: ❑ Comfort-Tek ® ❑ Stretch-Air ® NCO TPLAT1 ❑ BodiLink ® 3”L x 4”D Lateral trunk support, each (Swing away, GlideWear cover, non-padded)Mounting Location: ❑ Left ❑ Right$423 E0956,E1028 SEAT BACK TYPE Measure from top of back support to seat pan. Back support shell height is 9.5” with scapular cutouts.TPSB1 ❑ Standard Non-Folding Adjustable-Height Rigid Back with Pad (11” to 13” height range) STD TPSB2 ❑ Contoured Non-Folding Adjustable-Height Rigid Back with Pad (11” to 13” height range. PDAC verification pending.) NCO E2613 TPSB3 ❑ Aluminum Canes for Aftermarket back support, no Pad (Not available with height adjustable fenders.)NCOHEAD SUPPORT (The Comfort head support is WC-20 certified on the Acta-Back and Acta-Embrace. The head support is WC-19 certified when used with the TiLite backrest.)TPHDR1 Comfort BodiLink Head Support with GlideWear ® cover (Uses piano taper midline hardware. Available on Acta-Back, Acta-Embrace and TiLite rigid back supports) Width: ❑ 6” ❑ 8” $504 E0955,E1028 PUSH HANDLES (Height adjustable range is 33” - 40” as measured from the floor with 24” (540) wheels.)TPSB6 ❑ Bolt-On Height-Adjustable Removable Single Push Handle $196TPSB7 ❑ Bolt-On Height-Adjustable Removable Dual Push Handles $239CAMBER / CAMBER TUBES (Aluminum Camber tube standard. Anodize color will be black.) ❑ 2°(Minimum 1.5” rear wheel spacing) ❑ 4°(Minimum 1.25” rear wheel spacing ) ❑ 6°(Minimum 1” rear wheel spacing)❑ 8° ❑ 12°STDREAR WHEEL SPACING Measure from outside of side panel to inside of rear tire at top of wheel. (Not all rear wheel spacing is available with all a ccessories.)TPRWS1 ❑ 0.75” ❑ 1” ❑ 1.25” ❑ 1.5” ❑ 1.75” ❑ 2” STDTPCBR12 ❑ Adjustable Rear Wheel Spacing C amber Plugs STD TPCBR9 ❑ A dditional Spacers to Increase Rear Wheel SpacingNCOFRONT WHEELSTPFW14 ❑ 4” X 0.75” Plastic Wheel w/Poly Tire STD TPFW3 ❑ 4” X 0.75” Light-Up Micro-Caster$8814”FRONT SEAT HEIGHT N/A 13-16 13.5-16.5 REAR SEAT HEIGHT N/A 13-15 13.5-16 CENTER OF GRAVITY N/A 0.5-3.5 0.5-3.5Effective Jan 2023 (New Items in Red)Page 3 of 5 FGTPFW26 ❏ 4” X 1.5” LiteSpeed Plastic Wheel w/Soft Roll Tire$112 TPFW27❑ 4” X 1.5” LiteSpeed Billet Aluminum Wheel w/Soft Roll Tire (Black Hub Only ) $217REAR WHEELSTPRW14 TiLite SHADOW TM STD❑ 20”(451) Only available with seat depth range 9”-12”. ❑ 22”(501) Only available with seat depth range 11”-15”. ❑ 24”(540) Only available with seat depth range 11”-15”.TPRW7 Spinergy SPOX ❑ Black ❑ Red ❑ Blue ❑ White ❑ Orange ❑ Pink ❑ Purple ❑ Green (Orange, Pink, PurpleAnd Green only available in 20” size.) $915❑ 20”(451) - Std. Hub❑ 22”(501) - Std. Hub Only available with seat depth range 11”-15”. ❑ 24”(540) - Std. Hub Only available with seat depth range 11”-15”.TPRW8 Spinergy LX ❑ Black ❑ Red ❑ Blue ❑ White ❑ Bright Orange ❑ Flamingo Pink ❑ Purple ❑ Green $1148❑ 22”(501) - Std. Hub Only available with seat depth range 11”-15”. ❑ 24”(540) - Std. Hub Only available with seat depth range 11”-15”.TPRW9 Spinergy Design Lab LX Wheels (If same color is selected, anodized hubs and rims match color anodized package on page 1. Available with black spokes only.) ❑ Gold Anodize ❑ Green Anodize ❑ Blue Anodize ❑ Red Anodize ❑ Purple Anodize ❑ Orange Anodize $1364 ❑ 22”(501) - Std. Hub ❑ 24”(540) - Std. HubTPRW16 Spinergy ® Carbon Blade with 2x2 Twill Weave Carbon $1602❑ 24”(540) Not available with solid tires or airless inserts. Only available with seat depth range 11”-15”.TPRW17 X-Core Mag (Not available with Short Tabs, Quad Release Axles, or Omit Handrims Option.) $66❑ 20”(451) Only available with seat depth range 9”-12”. ❑ 22”(501) Only available with seat depth range 11”-15”. ❑ 24”(540) Only available with seat depth range 11”-15”.AXLESTPAXL1 ❑ Stainless Quick Release STD TPAXL3 ❑ Quad Release (Not available with Mag Rear Wheels.) $169PNEUMATIC REAR TIRESTPRTR1 ❑ Treaded Treaded 22”(501), 24”(540), and 26”(590) STD TPRTR2 ❑ Airless Inserts$98 E2213ZRTR31 ❑ MBL SpeedLite 20”(451), 22”(501), 24”(540)STD TPRTR30 ❑ Primo Sentinel (Available on all wheel sizes, 20” (451), 22” (501), and 24” (540)) $136 TPRTR8 ❑ Schwalbe Marathon (Only available on 24” (540)) $152 HANDRIMSTPRIM1 ❑ Aluminum – S ilver AnodizedSTD TPRIM21❑ Aluminum – Black Anodized (Not available with 20” (451) Rear Wheels.)NCO The Natural-Fit ® LT (Reduced Weight, Smaller Profile) (Not available with 20”(451) Rear Wheels.) TPRIM17 ❑ Standard Grip (Not available with Short Tabs or Spinergy Carbon Blade Rear Wheels.) $440 TPRIM18 ❑ Super Grip (Not available with Short Tabs or Spinergy Carbon Blade Rear Wheels.) $514 TPRIM19 ❑ Without Thumb Grip$423 TPRIM11 ❑ The Surge LT (All-In-One Oval with Gription™ Strip, Smaller Profile) (Not available with 20”(451) Rear Wheels.) $466 TPRIM20 ❑ Q-Grip (Exclusive High-Friction, Anti-Slip Coating) (Not available with 20”(451) Rear Wheels.) $358 Additional Handrim Options TPRIM5 ❑ Plastic Coated – Black (Not available with Mag Rear Wheels.) $174 TPRIM22 ❑ Omit Handrims NCO Tab Length TPRIM7 ❑ Long Tabs STD TPRIM8 ❑ Short Tabs (Not available with Mag Rear Wheels or The Natural-Fit ® Handrims with Thumb Grip.)$28WHEEL LOCKSTPWLK30 ❑ NEW! Compact Push to Lock (Redesigned with more clamping force)……………………………………………………….NCO TPWLK31 ❑ NEW! Compact Pull to Lock (Redesigned with more clamping force)………………………………………………………....NCOMounting Location:❑ Standard Location F ❑ Forward Mount Location G (Mounted on forward front of side panel.)SOLID SEAT PANTPSP1 Solid Seat Pan (Required Option) $163 E2231SEAT CUSHIONTPCSH2 ❑ Comfort Curve Cushion (Stretch-Air cover)$122 E2601 TPCSH23 ❑ Comfort Acta-Embrace ™ Comfort-Tek Zero Elevation Cushion $428 E2607 TPCSH11 ❑ ROHO ® LOW PROFILE ® Single Compartment Cushion$534 E2622Comfort Acta-Embrace Cushion CompatibilitySeat Width Seat DepthSeat Width Seat Depth10" 10", 11", 12", 13", 14", 15” 13" 10", 11", 12", 13", 14", 15" 11" 10", 11", 12", 13", 14", 15" 14"10", 11", 12", 13", 14", 15"12"10", 11", 12", 13", 14", 15"Effective Jan 2023 (New Items in Red)Page 4 of 5If you are using Adobe Acrobat, this order form may be converted into a quote request or into an orderby clicking one of the buttons (this feature is available exclusively to Permobil dealers and distributors). A Quote or an Order Confirmation will be sent to you within 24 hours.ORDER THIS CHAIRQUOTE THIS CHAIRROHO ® OPTIONS: (Made to order options have a 2-3 week lead time)SEAT DEPTH (B)10" 11”12”13”14”15”SEAT WIDTH (A)8” Made to Order Made to Order Made to Order Made to Order Made to Order Made to Order 9” Made to Order Made to Order Made to Order Made to Order Made to Order Made to Order 10” Made to Order Made to OrderMade to OrderMade to OrderMade to Order Made to Order 11” Made to Order Stocked Stocked Stocked Made to Order Made to Order 12” Made to Order StockedStockedStocked Made to OrderMade to Order13” Made to Order Made to Order Made to Order Stocked Stocked Stocked 14”Made to OrderMade to OrderMade to Order StockedStocked StockedSIDE GUARDS: (Side guards required)TPSDG30 ❑ Built in Side Guard with Height Adjustable Fender (Not available with 20” rear wheels, .)$487 TPSDG31 ❑ Built in Side Guard WITHOUT Fender STD ARMRESTS (Armrests attach to built in Side Guards.)TPARM2 ❑ Height Adjustable Desk Arm w/ 10” Pad (Works with Fendered Side Guard Attachment Option.)$363E0973TPARM31 ❑ Height Adjustable Armrest STD UPPER BODY POSITIONINGTPUBP1 ❑ Bodypoint ® PivotFit™ Dynamic shoulder harness with cam buckle mounts, rear-pull$228 E0960 ❑ Extra Small ❑ SmallTPUBP2 ❑ Bodypoint ® Monoflex™ chest support$217E0960❑ Extra Small ❑ SmallPELVIC POSITIONING BELTSTPBLT1❑ Velcro Adjustable, black nylon webbing seat belt $61 E0978 TPBLT8 ❑ Q’Straint® WC-19 Wheelchair-Anchored Pelvic Belt (Recommended for use with Transit Tie Down..)$217 E0978 TPBLT30 ❑ Bodypoint® 1” wide two-point padded hip belt with swivel buckle $196 E0978 TPBLT16 ❑ Bodypoint® 1” wide Evoflex® belt with small push-button buckle $201 E0978 LOWER BODY POSITIONINGTPCLF15 ❑ Bodypoint ® Ankle Huggers ®$244E0951❑ Extra Small ❑ Small ANTI-TIPSTPTIP1 ❑ Rear Aluminum - Black $169 E0971 TPTIP7 ❑ Single Anti-tip$136 E0971Mounting Location: ❑ Right Side ❑ Left Side BACKPACKTPBCK3❑ Permobil Medical Necessities Backpack$103 SPOKE GUARDSTPGRD30 ❑ Clear polycarbonate spoke guard with TiLite Pilot sticker pack (Not available with Mag Rear Wheels.)$147 K0065 ACCESSORIESTPCH1❑ Crutch Holder$244E2207Permobil manufactures TiLite manual wheelchairs in a wide variety of configurations to meet the varied needs of wheelchair users. The final selection of a particular model, its options and accessories, and its measurements rests solely with the wheelchair user and advising healthcare professional. These wheelchairs must be fitted by a qualified healthcareprofessional. HCPCS Codes are for reference purposes only. Actual coding and coverage varies by payer. Proper HCPCS coding is not a guarantee of payment. Please verify the appropriate payer’s coverage policy.Get the latest order forms at . Prices, standard features, options and accessories are subject to change without notice. All rights reserved. Trademarks are identified by symbols™ and ®. TiLite, TiFit, the TiLite logo, Ti, the Ti logo, and TiShaft are registered trademarks of TiSport, LLC and are licensed to Permobil. Permobil ® is a registered trademark of Permobil. Adobe ®, Acrobat ®, Acrobat Professional ® and Reader ® are registered trademarks of Adobe Systems Inc. Bodypoint ® is a registered trademark of Bodypoint Inc. Kenda ® is a registered trademark of Kenda Rubber Industrial Co. Ltd. ROHO ®, AGILITY ®, Low Profile ® and Quadtro Select ® are registered trademarks of ROHO Inc. Schwalbe ® is a registered trademark of Ralf Bohle GmbH. The Natural-Fit ® and Out-Front ® are registered trademarks of Three Rivers Holdings, LLC. The ACTA-BACK ®, ACTA-EMBRACE™, COMFORT-TEK™, COMPASS ®, CURVE ®, ELEMENTS ®, and STRETCH AIR™ are registered trademarks of THE COMFORT COMPANY ® and are licensed to Permobil. Q’Straint ® is a registered trademark of Q’Straint Inc.。
THANK YOU FOR CHOOSING A MORLEY STEVE V AI BAD HORSIE 2 CONTOUR WAH. YOU NOW OWN THE BEST PEDAL MADE!Please take a few minutes to familiarize yourself with the features of your new pedal. We hope you enjoy using it as much as we enjoyed building it.ABOUT OUR ELECTRO-OPTICAL CIRCUITRY:An LED (Light Emitting Diode) shines on an LDR (Light Dependent Resistor). A shutter alters light between the two components controlling functions like Wah, volume and switching. Electro-Optical design ensures smooth pedal control without unwanted noise typical with potentiometer (pot) controlled pedals.ABOUT THE CONNECTIONS:9V: To ensure noise free operation, ONLY Morley's 9VDC 300 milliamp regulated adapter should be usedIN: Input jack. Plug instrument into this jack using 1/4" guitar cable.OUT: Connect amplifier to this jack using a 1/4" guitar cable.USING AN AC ADAPTER:All Morley pedals use Morley's 9VDC 300 milliamp regulated adapter. Center pin polarity is negative. Using a non-regula ted a da pter could ca use a low frequency hum in your amplifier. Using an adapter with the wrong polarity may damage the pedal.USING A BATTERY:All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you use a good quality alkaline battery. To prolong battery life, unplug your cord completely from the input jack when not using the pedal. When the pedal is not used for extended periods, remove the battery from the pedal. Our “Quick Clip” Bettery door allows easy access to battery compartment. ONE YEAR WARRANTYAll Morley® pedals are warranted for one year with copy ofdated purchase receipt. To obtain warranty service, contactstore where pedal was purchased or email************************BAD HORSIE 2 FEATURES (MODEL V AI-2):· · SWITCHLESS OPERATION: Simply Step on to engageWah and step off to go to bypass.· CONTOUR SWITCH: Selects a second Wah mode· LEVEL: Adjusts the output of the Wah in ContourMode· CONTOUR: Adjust the frequncy of the Wah when inContour ModeV AI-2 SPECIFICATIONS:Power: 9V Battery or 9VDC 300mA regulated (center pinnegative)Indicator (right): Wah on LED on, Wah off LED offIndicator (left): Contour Wah on LED onDimensions: 9.13" L x 5.88" W x 2.75" HCurrent Draw: 12 mA @ 9VDCWeight: 3.3 lb./ 1.51 kg。
