AZ8-1AT-9D中文资料

GENERAL DATALife ExpectancyMinimum operationsMechanical100 million operations ElectricalLight Duty3 x 105at 3 A, 120 VACMedium Duty1.8 x 105

at 6 A, 120 VACHeavy Duty1 x 105at 10 A, 120 VACOperate Time (typical)5 ms at nominal coil voltageRelease Time (typical)2 ms at nominal coil voltage(with no coil suppression)Dielectric Strength750 Vrms contact to contact(at sea level for 1 min.)2500 Vrms contact to coil except hermeticallysealed version which is 1600 VrmsInsulation1000 megohms min. at 20°C, 500 VDC,Resistance50% RHDropoutGreater than 5% of nominal coil voltageAmbient TemperatureAt nominal coil voltageOperating-55°C (-67°F) to 90°C (194°F) Class B-55°C (-67°F) to 115°C (239°F) Class FStorage-55°C (-67°F) to 130°C (266°F) Class B-55°C (-67°F) to 155°C (311°F) Class FVibration0.062" DA at 10–55 Hz, 10 g at 55–110 HzShock10 gEnclosureP.E.T. polyesterTerminalsTinned copper alloy, P.C.Max. Solder Temp.270°C (518°F)Max. Solder Time5 secondsMax. Solvent Temp.80°C (176°F)Max. Immersion Time30 secondsWeight8 gramsCOILPowerAt Pickup VoltageStandard coil: 210 mW(typical)Sensitive coil: 140 mWHeavy duty: 228 mW(110 mW available)Max. ContinuousClass B:2.0 W 20°C (68°F) ambientDissipation1.6 W 40°C (104°F) ambientClass F:2.5 W 20°C (68°F) ambient2.1 W 40°C (104°F) ambientTemperature RiseAt nominal coil voltageStandard coil: 38°C (68°F)Sensitive coil: 28°C (50°F)TemperatureMax. 105°C (221°F) Class AMax. 130°C (266°F) Class BMax. 155°C (311°F) Class F AZ8

11/14/06WMINIATURE PC BOARD RELAY

FEATURES•Subminiature size•High sensitivity, 110 mW pickup•Coils to 48 VDC•Hermetically sealed version available•Epoxy sealed for automatic wave soldering•Contacts rated at 3, 6 or 10 Amps•Withstands 6 kV IEEE Lightning Surge (special order)•Class B insulation (130°C) standard•Class F insulation (155°C) version available•UL, CUR file E44211•VDE approved versions available (Class A Insulation only)

CONTACTSArrangementSPDT (1 Form C)SPST (1 Form A) 10 A version onlyRatingsResistive load:Light DutyMax. switched power:100 W or 600 VAMax. switched current:3 AMax. switched voltage:150 VDC or 300 VACUL Rating:See chart on Page 3Medium DutyMax. switched power:180 W or 1800 VAMax. switched current:6 AMax. switched voltage:150 VDC or 300 VACUL Rating:See chart on Page 3Heavy DutyMax. switched power:300 W or 2400 VAMax. switched current:10 AMax. switched voltage:150 VDC or 300 VACUL Rating:See chart on Page 3MaterialLight duty: SilverMedium duty: Silver nickelHeavy duty: Silver cadmium oxideResistance< 100 milliohms initially

NOTES1.All values at 20°C (68°F).2.Relay may pull in with less than “Must Operate” value.3.Other coil resistances and sensitivities available upon request.4.Unsealed relays should not be dip cleaned.5.Specifications subject to change without notice.元器件交易网www.cecb2b.comAZ8RELAY ORDERING DATACOIL SPECIFICATIONSORDER NUMBER*STANDARD RELAYS: 1 Form C (SPDT)LIGHT DUTY (3 Amp contact)MEDIUM DUTY (6 Amp contact)NominalMax. VDCResistanceMust OperateUnsealedEpoxy SealedUnsealedEpoxy SealedCoil VDCContinuous± 10%VDC510.6563.25AZ8–1C–5DAZ8–1C–5DEAZ8–1CH–5DAZ8–1CH–5DE612.6803.90AZ8–1C–6DAZ8–1C–6DEAZ8–1CH–6DAZ8–1CH–6DE919.01805.85AZ8–1C–9DAZ8–1C–9DEAZ8–1CH–9DAZ8–1CH–9DE1225.03207.80AZ8–1C–12DAZ8–1C–12DEAZ8–1CH–12DAZ8–1CH–12DE1837.872011.7AZ8–1C–18DAZ8–1C–18DEAZ8–1CH–18DAZ8–1CH–18DE2450.01,28015.60AZ8–1C–24DAZ8–1C–24DEAZ8–1CH–24DAZ8–1CH–24DE4887.03,80031.20AZ8–1C–48DAZ8–1C–48DEAZ8–1CH–48DAZ8–1CH–48DESENSITIVE RELAYS: 1 Form C (SPDT)LIGHT DUTY (3 Amp contact)MEDIUM DUTY (6 Amp contact)NominalMax. VDCResistanceMust OperateUnsealedEpoxy SealedUnsealedEpoxy SealedCoil VDCContinuous± 10%VDC512.6803.25AZ8–1C–5DSAZ8–1C–5DSEAZ8–1CH–5DSAZ8–1CH–5DSE614.81103.90AZ8–1C–6DSAZ8–1C–6DSEAZ8–1CH–6DSAZ8–1CH–6DSE922.42505.85AZ8–1C–9DSAZ8–1C–9DSEAZ8–1CH–9DSAZ8–1CH–9DSE1230.04407.80AZ8–1C–12DSAZ8–1C–12DSEAZ8–1CH–12DSAZ8–1CH–12DSE2460.01,78015.60AZ8–1C–24DSAZ8–1C–24DSEAZ8–1CH–24DSAZ8–1CH–24DSE48120.07,12031.20AZ8–1C–48DSAZ8–1C–48DSEAZ8–1CH–48DSAZ8–1CH–48DSESTANDARD RELAYS: 1 Form C (SPDT)HEAVY DUTY (10 Amp contact)NominalMax. VDCResistanceMust OperateUnsealedEpoxy SealedCoil VDCContinuous± 10%VDC510.6564.0AZ8–1CT–5DAZ8–1CT–5DE612.6804.8AZ8–1CT–6DAZ8–1CT–6DE919.01807.2AZ8–1CT–9DAZ8–1CT–9DE1225.03209.6AZ8–1CT–12DAZ8–1CT–12DE2450.01,28019.2AZ8–1CT–24DAZ8–1CT–24DE4887.03,80038.4AZ8–1CT–48DAZ8–1CT–48DE*To indicate Class F version, add suffix "F". Other coil resistances and sensitivities available. Please contact the factory.Substitute “1AT” in place of “1CT” to indicate 1 Form A. For Hermetically sealed version, substitute “H” for “E”.

RELAY ORDERING DATA - VDE APPROVED VERSIONSCOIL SPECIFICATIONSORDER NUMBERSTANDARD RELAYS: 1 Form C (SPDT) – VDEMEDIUM DUTYNominalMax. VDCResistanceMust OperateUnsealedEpoxy SealedCoil VDCContinuous± 10%VDC6 Amp5 Amp510.6563.25AZ8–1CH–5DAAZ8–1CH–5DEA612.6803.90AZ8–1CH–6DAAZ8–1CH–6DEA919.01805.85AZ8–1CH–9DAAZ8–1CH–9DEA1225.03207.80AZ8–1CH–12DAAZ8–1CH–12DEA2450.01,28015.60AZ8–1CH–24DAAZ8–1CH–24DEA4887.03,80031.20AZ8–1CH–48DAAZ8–1CH–48DEASENSITIVE RELAYS: 1 Form C (SPDT) – VDEMEDIUM DUTYNominalMax. VDCResistanceMust OperateUnsealedEpoxy SealedCoil VDCContinuous± 10%VDC6 Amp5 Amp512.6803.25AZ8–1CH–5DSAAZ8–1CH–5DSEA614.81103.90AZ8–1CH–6DSAAZ8–1CH–6DSEA922.42505.85AZ8–1CH–9DSAAZ8–1CH–9DSEA1230.04407.80AZ8–1CH–12DSAAZ8–1CH–12DSEA2460.01,78015.60AZ8–1CH–24DSAAZ8–1CH–24DSEA48120.07,12031.20AZ8–1CH–48DSAAZ8–1CH–48DSEA