DIN标准DIN 1 DIN 7 DIN 84 DIN 85 DIN 93 DIN 94 DIN 95 DIN 96 DIN 97 DIN 125-A DIN 125-B DIN 126 DIN 127-A DIN 127-B DIN 128-A DIN 128-B DIN 137-A DIN 137-B DIN 186 DIN 188 DIN 258 DIN 261 DIN 315 AF DIN 315 DFISO标准ISO 2339 [GB117] ISO 2338 [GB119-86] EN ISO 1207 [GB65-85] EN ISO 1580 [GB67-85] [GB854] ISO 1234 [GB91] [GB101] [GB99] [GB100] EN ISO 7089 [GB97.1-85] EN ISO 7090 [GB97.2-85] ISO7091 [GB7244] [GB93-87] [GB7245-87]实物图圆锥销B型 Taper pins 圆柱销 Parallel pins名称开槽圆柱头螺钉 Slotted cheese head screws 开槽盘头（平圆头）螺钉 Slotted pan head screws 单耳止动垫圈 Tab washers 开口销 Split cotter pins 开槽半沉头木螺钉 Slotted raised countersunk (oval)head wood screws 开槽（半）圆头木螺钉 Slotted round head wood screws 开槽沉头木螺钉> Slotted countersunk(flat)head wood screws 平垫圈 Washers 平垫圈（倒角型） Medium washers for hexagon bolts and nuts 平垫圈 Plain washers 重型弹簧垫圈 Spring lock washers tang ends 标准型弹簧垫圈 Spring lock washers square ends 鞍形弹簧垫圈A型 Curved spring lock washers 弹簧垫圈B型 Wave spring lock washers 弹簧止动垫圈A型 Curved spring washers 波型弹簧垫圈B型 Wave spring washers T型槽用方头螺栓A型 T-head bolts with spuare neck T型双接头螺栓 T-head bolts with double nip 螺纹圆锥销 Tap pins with threaded end T型头螺栓 T-head bolts 蝶形螺母（美式） Wing nuts ameriker form[GB955] [GB37-88]ISO 8737[GB62-88]蝶形螺母（德式） Wing nuts germany formDIN 316 AF DIN 317 DF DIN 3770 DIN 404 DIN 417 DIN 427 [GB832-88] ISO 7435 [GB75-85] EN ISO 2342 [GB73-85] [GB808-88] [GB856-88] EN ISO 7092 [GB848-95] [GB852-88] [GB852-88]蝶形螺栓（美式） Wing screws ameriker form 蝶形螺栓（德式） Wing screws gemany form O型密封圈 O ring 开槽带孔球面圆柱头螺栓 Capstan screws 开槽长圆柱端紧定螺钉 Slotted set srews with full dog point 开槽平端紧定螺钉（半扣） Slotted headless screw with chamfered end 小六角特扁细牙螺母（管螺纹螺母） Pipe nuts with thread according to DIN ISO228 part1 外舌止动垫圈 Washers with external tap 小垫圈（用于圆柱头螺栓） Washer for cheese head screws 工字钢用方斜垫片（U型） Square taper washers for I-sections 工字钢用方斜垫片（I型） Square taper washers for I-sections 木螺栓专用四方垫片 Square washers for woodDIN 431 DIN 432 DIN 433 DIN 434 DIN 435 DIN 436 DIN 438 DIN 439 DIN 439 DIN 439 DIN 440 DIN 443 DIN 444 DIN 462 DIN 463 DIN 464ISO 7436 [GB74-85] ISO 4035 [GB6172-86]开槽凹端紧定螺钉 Slotted set screws with cut point 六角薄螺母 Hexagon thin nuts chamfered 左旋六角薄螺母L Hexagon thin nuts left threadISO 8675 [6173-86] ISO 7094细牙六角薄螺母 Hexagon thin nuts fine thread 木螺钉用垫圈 Washers especially for wood constructions 密封帽 Sealing caps， push-in type[GB798-88]活节（环首）螺栓B型 Eye bolts form B 内舌止动垫圈用于花键螺帽 Internal tab washers for slotted round nuts DIN 1804[GB855-88] [GB834-88]双耳止动垫圈 Washers with 2 taps 滚花高头螺钉 Knurled thumb screws high type 开槽滚花高头螺钉 Slotted kunurled thumb screws,high type metric threadDIN 465DIN 466 DIN 467 DIN 470 DIN 471 DIN 472 DIN 478 DIN 479 DIN 480 DIN 508 DIN 525 DIN 529 DIN 546 DIN 547 DIN 551 DIN 553 DIN 557 DIN 561 DIN 562 DIN 571 DIN 580 DIN 582 DIN 601 DIN 603 DIN 604 DIN 605[GB806-88] [GB807-88]滚花高螺母 Knurled thumb nuts high type 滚花薄螺母 Knurled thumb nuts thin type 锁紧垫圈 Sealing washers[GB894.1-86] [GB893.1-86]轴用弹性挡圈 Retaining rings for shafts 孔用弹性挡圈 Retaining rings for bore 方头带垫螺栓 Square head bolts with collar 方头圆柱底端螺栓 Square head bolts with half dog point 方头带垫半圆底端螺栓 Square head bolts with collar,half dog point and rounded end T型槽螺母 T-slot nuts 单头螺柱 Single end studsISO 299[GB799-88] [GB817-76] [GB815-88] ISO 4766 [GB73-85] ISO 7434 [GB71-85] [GB39-88]地脚螺栓 Masonry bolts 带槽圆螺母 端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉 Slotted set screws with cone point 开槽锥端紧定螺钉 Slotted set screws with cone point 方螺母-C级 Square nuts product grade C 六角头圆柱端紧定螺钉 Hexagon set screws with full dog point 薄型方螺母-B级 Square thin nuts product gradeB 六角头木螺钉 Hexagon head wood screws 吊环螺钉 Lifting eye bolts 吊环螺母 Lifting eye nuts[GB102-86] EN ISO 3266 [GB825-76]ISO 4016 EN ISO 8677 [GB14-88]六角头螺栓 Hexagon bolts 大半圆头方颈螺栓（马车螺栓） Mushroom head square neck bolts (Cup square neck bolts) 沉头带插销马车螺栓 Flat countersunk nib bolts 沉头长方颈马车螺栓 Flat countersunk long square neck boltsDIN 607 DIN 608 DIN 609 DIN 610 DIN 653 DIN 660 DIN 661 DIN 662 DIN 674 DIN 703 DIN 705 DIN 741 DIN787 DIN 835 DIN 906 ISO 299 [GB900-88] [GB816-88] [GB835-88] ISO 1051 [GB867-86] ISO 1051 [GB869-86] ISO 1051 ISO 1051半圆头带插销马车螺栓 Cup head nid bolts 沉头短方颈马车螺栓 Flat countersunk short square neck bolts 六角头精配螺栓（长螺纹） Hexagon fitted bolts, long thread 六角头精配螺栓（短螺纹） Hexagon fitted bolts, short thread 滚花平头螺头 Knurled thumb screws thin type 半圆头铆钉 Round head rivets 沉头铆钉 Countersunk head rivets 半沉头铆钉 Raised countersunk head rivets 大扁头铆钉 Mushroom head rivets 重型侧面带孔圆螺母 Adjusting rings, heavy range(shafting collars) 侧面带孔圆螺母 Adjusting rings 卡头 Wire rope clips T型槽螺钉 T-slot screws 双头螺柱（旋入量=2d） Studs-Metal end=2d 内六方锥形闭锁螺钉 Hexagon socket pipe plugs,conical thread 内六方圆柱形闭锁螺钉 Hexagon socket screw plugs with cylindrical thread 外六角圆柱头闭锁螺钉 Hexagon socket screw plugs with cylindrical threadDIN 908DIN 910 DIN 911 DIN 912 DIN 913 ISO 2936 ISO 4762 [GB70-85] ISO 4026 [GB77-85] ISO 4027 DIN 914 [GB78-85] ISO 4028 DIN 915 [GB79-85] ISO 4029 DIN 916 [80-85]内六角扳手 Socket wrenches 内六角圆柱头螺钉 Hexagon socket head cap screws 内六角平端紧定螺钉 Hexagon socket set screws with flat point 内六角锥端紧定螺钉 Hexagon socket set screws with cone point 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point 内六角凹端紧定螺钉 Hexagon socket set screws with cup pointDIN 917 DIN 920 DIN 921 DIN 923 DIN 927 DIN 928 DIN 929 DIN 931 DIN 933 DIN 934 DIN 934 DIN 934 EN ISO 7035 DIN 935 DIN 936 DIN 937 DIN 938 DIN 939 DIN 940 ISO 8765 DIN 960 [GB5785-86] ISO 8676 DIN 961 DIN 962 DIN 963 DIN 964 DIN 965 H EN ISO 2009 [GB68-85] EN ISO 2010 [GB69-85] EN ISO 7046 [GB819-85] [GB5786-86] [GB6178-86] ISO 4035 [GB6172.1-86] EN ISO 7038 [GB6181-86] [GB897-88] [GB898-88] [GB/T13680-92] [GB/T13681-92] ISO 4014 [GB5782-86] ISO 4017 [GB5783-86] ISO 4032 [GB6170-86] ISO 8673 [GB6171-86] [GB838-88] [GB830-88]薄型盲螺帽 Hexagon cap nuts 开槽小圆柱头螺钉 Slotted short cheese head screws 开槽大圆柱头螺钉 Slotted pan head screws with large head 开槽圆柱头轴位螺钉 Slotted pan head screws with shoulder 开槽无头轴肩螺钉 Slotted shoulder screws 焊接方螺母 Square weld nuts 焊接六角螺母 Hexagon weld nuts 六角头螺栓（ISO 4014半扣） Hexagon head bolts ISO 4014 六角头螺栓-通扣（ISO 4017） Hexagon head screws ISO 4017 六角螺母(ISO 4032) Hexagon full nuts ISO 4032 细扣六角螺母 Hexagon nuts with metric fine pitch thread 左旋六角螺母 L Hexagon nuts with left thread 六角开槽螺母C级 Hexagon slotted and castle nuts product grade C 六角头薄螺母 Hexagon thin nuts 六角开槽薄螺母 Hexagon thin slotted and half castle nuts 双头螺柱（旋入量=1d） Studs metal end=1d 双头螺柱（旋入量=1.25d） Studs metal end=1.25d 双头螺柱（end=1.5d） Studs metal end=1.5d 六角头细牙螺栓（半牙） Hexagon head bolts, metric fine pitch thread 六角头细牙螺栓（全牙） Hexagon head bolts, metric fine pitch thread 头部穿孔六角头螺栓 Additional shapes and versions for bolts 开槽沉头螺钉 Slotted countersunk head screws 开槽半沉头螺钉 Slotted raised countersunk oval head screws 十字槽沉头螺钉 Cross recessed countersunk flat米字槽沉头螺钉DIN 965 ZEN ISO 7046Crossrecessed countersunk flat head screws PZ 沉头内六花螺栓 Countersunk head screws similar DIN 965 six lobe drive 十字槽半沉头螺钉 Cross recessed contersunk oval head screws PH 米字槽半沉头螺 Cross recessed contersunk oval head screws PZ 六角头螺母 Hexagon nuts type-1 六角头螺母 Hexagon nuts type-2WS 9475 EN ISO 7047 DIN 966 H [GB820-85] EN ISO 7047DIN 966 Z DIN 970 DIN 971 DIN 972 DIN 975 DIN 976-1 DIN 976-2 DIN 979 DIN 980 DIN 981 DIN 982ISO 8674 [GB6176-86] [GB15389-94]细牙六角头螺母（2型） Hexagon nuts with fine thread 牙条（全螺纹） Threaded rods(studdings) 螺杆（牙棒）DIN 975 Threaded rods 螺纹销钉B型 Stud bolts Form B 六角头开槽薄螺母（2型） Hexagon thin slotted and castle nuts 全金属六角锁紧螺母V型 Prevailing torque type hexagon nuts similar DIN 934 copper tin 圆螺母 Locknuts 非金属嵌件六角锁紧螺母(高型) Prevailing torque type hexagon nuts w.non-metallic insert high 非金属嵌件六角锁紧螺母（薄型） Prevailing torque type hexagon nuts w.non-metallic insert thin 六角自锁盲螺帽 Prevailing torque type hexagon domed cap nuts w.non met.insert 配合垫片 Passcheiben 木材连接用垫片 Washers for timber connectors 沉头钢钉 Round plain head nails[GB6184-86] ISO 2982 [GB812-88] ISO 7040 [GB889.1-86] ISO 10511DIN 985[GB6172.2-86]DIN 986 DIN 988 DIN 1052 DIN 1151 DIN 1440 DIN 1441 DIN 1444 ISO 2341 ISO 8738销钉专用垫片A级 Plain washers for clevis pins 销钉专用垫片 Plain washers for clevis pins 带头销钉 Clevis pins with headDIN 1471EN ISO 8744 [GB/T13829.2]槽销（锥槽） Grooved pins full-length taper grooved 槽销（半长锥槽） Grooved pins half length taper grooved 槽销（带倒角及全长平行沟槽） Grooved pins,full-length parallel guooved with chamfer 前端凹槽槽销 Grooved pins, reserve grooved half length 中部凹槽槽销 Grooved pins, centre grooved 圆头槽销 Grooved pins half-round head 沉头槽销 Grooved pins with countersunk head 六角螺母棒 Turnuckles(centre parts), made out of hexagon bar 花篮螺栓 Turnuckles with eye bolt and hook bolt 弹性圆柱销 Spring type straight poins,slotted 组合式盖形螺母 Hexagon domed cap nuts 开槽圆螺母 Slotted round nuts for hook spanner 圆螺母（带插销孔） Round nuts with set holes 盘形弹簧垫圈 Disc spring washer 管卡（喉箍） Hose clamps with worm gear drive shape A 润滑油嘴（旋扭头） Lubricating nipples, button head 夹管 Shackles for conduilts U型螺栓 Stirrup bolts 安全扣 Spring hookDIN 1472 DIN 1473EN ISO 8745 [GB/T13829.2] EN ISO 8740DIN 1474 DIN 1475 DIN 1476 DIN 1477 DIN 1479 DIN 1480 DIN 1481 DIN 1587 DIN 1804 DIN 1816 DIN 2093 DIN 3017 DIN 3404 DIN 3567 DIN 3570 DIN 5299 DIN 6319 DIN 6325 DIN 6330 DIN 6331 DIN 6334ISO 8741 ISO 8472 EN ISO 8746 [GB/T13829.3] ISO 8747EN ISO 8752 [GB879-1] [GB802-88][GB849-88] ISO 8734 [GB56-88] [GB6177-86]球面垫圈 Spherical washers conical seats 圆柱销 Parallel pins 球面垫圈 Spherical washers conical seats 六角厚螺母 Hexagon nuts 1.5d 六角加长螺母 Hexagon nuts longDIN 6796 DIN 6797 DIN 6798 DIN 6799 DIN 6885 DIN 6888 DIN 6899 DIN 6900 DIN 6901 DIN 6912 [GB9074.1-17] [GB9074.18-23] [GB861.1-87] [GB862.1-87] [GB861.1-87] [GB862.1-87] [GB896-76] ISO773/2491 ISO 3912鞍形弹簧垫圈 Conical spring washers for bolted connections 齿形锁紧垫圈（内齿\外齿） Toothed locd washers form A/J 锯齿锁紧垫圈（内齿\外齿） Serrated lock washers form A/J 开口挡圈（花垫圈） Retaining washers for shafts 棱键（A型） Parallel keys form A 半圆键 Woodruff keys 嵌环（支撑环） Thimbles 六角头螺栓和垫圈组合件 Screws assemblies 自攻螺钉和垫圈组合件 Tapping screws assemblier 薄型内六角圆柱头螺钉 Hexagon socket head caps screws w.centre hole and low head 大六角头螺栓 Hexagon head bolts with large head(friction grip bolts) 大六角螺母 Hexagon nuts with large wideth across flat(frication grip nuts) 大垫圈 Round washers for friction grip bolts 锲形方垫圈 Square taper washers for friction grip bolts on T-sectionsDIN 6914DIN 6915 DIN 6916 DIN 6917 DIN 6923 DIN 6925 ISO461 [GB6177-86] ISO 7042 [GB6185.1-2000] ISO 15979 ISO 15983 [GB12617/12618] ISO 15980 ISO 15984 [GB12617/12618] [GB875/975-86] EN ISO 8750 ISO 13337全金属六角法兰面锁紧螺母 Prevailing torque type all metal 全金属六角锁紧螺母（2型） Prevailing torque type hexagon nuts, all metallic nuts 开口型扁圆头抽芯铆钉 Blind rivets round head 开口型沉头抽芯拉铆钉 Blind rivets countersunk head 扁平头半空心/全空心铆钉 Rivets for brake abd clutch lining 螺旋夹紧销 Spiral-pins medium duty 轻型弹性圆柱销 Spring pins, light type 重型加厚垫圈 Washers for bolts with heavy type spring pinsDIN 7337-ADIN 7337-B DIN 7338 DIN 7343 DIN 7346 DIN 7349平圆头内六角螺栓（带台）ISO 7380Hexagon socket button head screws 平圆头内六角螺栓（带华司）ULFISO 7380-WS 9480DIN 7500Hexagon socket button head screws flasch ULF 平圆头内六花锁紧螺栓(带定位孔)Torx Security screws similar ISO 7380 with six lobe drive pin ISO螺纹三角缩尾螺栓（12种头型） Thread rolling screws for metric ISO thread 六角方头自钻自攻螺钉 Self drilling with tapping screw thread according to DIN 7970 form K 十字槽半圆头自钻自攻螺钉 Hex head thread cutting screws with metric thread form N 十字槽沉头自钻自攻螺钉 Thread cutting screws cross recessed head form P 开槽切削螺纹螺钉（多种头型） Thread cutting screws 十字槽切削螺纹螺钉 Thread cutting screws cross recess 铜/铝密封垫圈 Cu/Alu sealing washer T-型四爪螺母 Tee nuts with pronge 扣紧螺母 Self locking counter nuts 钢结构用六角头螺栓连接副 Hexagon head fitting bolts for steel structuresDIN 7504-KDIN 7504-NDIN 7504-P DIN 7513 DIN 7516 DIN 7603 DIN 7965 DIN 7967 DIN 7968 DIN 7971 DIN 7972 ISO 1481 [GB5282-85] ISO 1482 [GB5283-85] ISO 1483 DIN 7973 DIN 7976 DIN 7978 [GB5284-85] ISO 1479 [GB5285-85] ISO 8736开槽盘头自攻螺钉 Pan slot head tapping screws 开槽沉头自攻螺钉 Countersunk flat head tapping screws with slot 开槽半沉头自攻螺钉 Raised countersunk oval head tapping screws with slot 六角头自攻螺钉 Hexagon tapping screws 内螺纹锥销 A型 Taper pins with internal thread unhardened 内螺纹柱销 D型 Parallel pins with internal thread hardened 圆柱头螺栓用弹簧垫圈 Spring lock washers for screws with cylindrical headsDIN 7979ISO 8735DIN 7980ISO 8738ISO 7049 DIN 7981 H [GB845-85] ISO 7049 DIN 7981 Z [GB845-85] WS 9477十字槽盘头自攻螺钉 Pan head tapping screws with cross recessed PZ 米字槽盘头自攻螺钉 Pan head tapping screws with cross recessed PZ 内六花盘头自攻螺钉 Pan head screws similar to DIN 7981 with six lobe drive 内六花盘头自攻螺钉（带定位孔） Security screws similar to DIN 7981 with six lobe drive pin 十字槽沉头自攻螺钉 Countersunk flat head tapping screws with cross recessed PH 米字槽沉头自攻螺钉 Countersunk flat head tapping screws with cross recessed PZ 内六花沉头自攻螺钉 Countersunk tapping screws si. DIN 7982 with six lobe drive 内六花沉头自攻螺钉（带定位孔） Security screws similar to DIN 7982 with six lobe drive pin 十字槽半沉头自攻螺钉 Raised countersunk oval head tapping screw cross recessed PH 米字槽半沉头自攻螺钉 Raised countersunk oval head tapping screws crossPZ 内六花半沉头自攻螺钉 Countersunk oval head screws sim.DIN7983 with six lobe drive 薄型内六角圆柱头螺钉 Hexagon socket head cap screwsWS 9485 ISO 7050 DIN 7982 H [GB846-85] ISO 7050 DIN 7982 Z [GB846-85] WS 9478WS 9486 ISO 7051 DIN 7983 H [GB847-86] ISO 7051 DIN 7983 Z [GB847-86] WS 9479 DIN 7984 EN ISO 7045 DIN 7985 H [GB818-85] EN ISO 7045 DIN 7985 Z [GB818-85] WS 9460十字槽盘头螺钉 Cross recessed raised pan head screws PZ 米字槽盘头螺钉 Cross recessed raised pan head screws PZ 内六花盘头螺钉 Pan head screws similar DIN 7985 six lobe drive 钢结构用高强度垫圈 Plain washers for steel constructions high strengh 钢结构用六角头螺栓 Hexagon head bolts for steel structures 沉头内六角螺栓 Hexagon socket countersunk head screws 沉头内六花螺栓 Countersunk head screws similar DIN 7991 six lobe driveDIN 7989 DIN 7990 DIN 7991[GB1230-84] [GB1229-84] ISO 10642WS 9470沉头内六花螺栓(带定位孔)Security screws similar DIN 7991 six lobe drive轴用钢丝挡圈Roundwire snap rings for shafts 十（米）字槽半沉头木螺钉Cross recessed raised countersunk head wood screws 十（米）字槽圆头木螺钉Cross recessed round head wood screws十（米）字槽沉头木螺钉Cross recessed countersunk head wood screws螺纹护套（普通/自锁等）Ciol inserts, coarse, fine thread, silf lockingISO 7093大外径垫圈[GB96-85]Washers with o.d.=3 i.d.弹簧卡子Spring cotter of bolt 平板螺栓Belting bolts(elevator bolts)干壁钉（墙板钉）Dry wall screws 平板螺栓Belting bolts双叠自锁垫圈Self locding screw-retaining washer环形螺母Clamp nuts圆螺母用止退垫圈Tab washers for slotted round nuts 黄油嘴子A 型Grease nippel Form A 黄油嘴子 C 型Grease nippel Form C 自锁型轴头 AS 型Angle hinge Form ASWS 9482DIN 7993[GB895.2-86]DIN 7995[GB952-86]DIN 7996[GB950-86]DIN 7997[GB951-86]DIN 8140DIN 9021DIN 11024DIN 13257DIN 18182DIN 15237DIN 25201DIN 28129[GB63-88]DIN 70952[GB858-88]DIN 71412-A DIN 71412-CDIN 71802。
序号DIN 英文名称EN ISO GB 中文名称1DIN 1 taper pins EN 22339 ISO 2339 GB/T 117 圆锥销2DIN 1052 washers for timber connectors 木材连接用垫圈3DIN 11024 spring cotters 弹簧卡子4DIN 1151 round plain head nails 沉头钢钉5DIN 125－1 plain washers without chamfer ISO 7089 GB/T 97.1 平垫圈 A 级6DIN 125－2 plain washers with chamfer ISO 7090 GB/T 97.2 平垫圈倒角型 A 级7DIN 126 plain washers ISO 7091 GB/T 95 平垫圈 C 级8DIN 127－1 spring lock washers with tang ends GB/T 7244 重型弹簧垫圈9DIN 127－2 spring lock washers with square ends GB/T 93 标准弹簧垫圈10DIN 128 curved spring lock washers GB/T 7245 鞍形弹簧垫圈11DIN 13257 belting bolts (elevator bolts) 平板螺栓12DIN 137 wave spring washers GB/T 955 波形弹性垫圈13DIN 1440 plain washers for clevis pins EN 28738 ISO 8738 GB/T 97.3 销轴用平垫圈14DIN 1441 Washers, Type Coarse for Bolts 螺栓用粗制垫圈15DIN 1444 clevis pins with head EN 22341 ISO 2341 GB/T 882 销轴16DIN 1471 grooved pins, taper grooved ISO 8744 GB/T 13829.2 槽销锥槽（A 型）17DIN 1472 grooved pins, taper grooved half length ISO 8745 GB/T 13829.2 槽销锥槽（B 型）18DIN 1473 grooved pins, parallel grooved full length ISO 8740 GB/T 13829.1 槽销平行沟槽（B 型）19DIN 1474 grooved pins, reserve grooved half length ISO 8741 GB/T 13829.2 槽销锥槽（C 型）20DIN 1475 grooved pins, centre grooved ISO 8742 GB/T 13829.1 槽销平行沟槽（C 型）21DIN 1476 grooved pins with round head ISO 8746 GB/T 13829.3 槽销圆头、沉头（A 型）22DIN 1477 grooved pins with countersunk head ISO 8747 GB/T 13829.3 槽销圆头、沉头（B 型）23DIN 1479 turnuckles(centre parts), made out of hexagon bar 六角螺母棒24DIN 1480 turnuckles with eye bolt and hook bolt 花篮螺栓25DIN 1481 spring pins, heavy type ISO 8752 GB/T 879.1 弹性圆柱销直槽重型26DIN 1587 hexagon domed cap nuts GB/T 802 组合式盖形螺母序号DIN 英文名称EN ISO GB 中文名称27DIN 1804 slotted round nuts for hook spanner 开槽圆螺母（配合沟头扳手）28DIN 1816 round nuts with set holes 圆螺母（带插销孔）29DIN 18182 dry wall screws 干壁钉（墙板钉）30DIN 186 T－head bolts with square neck GB/T 37 T 型槽用螺栓31DIN 188 T－head bolts with double nip T 型双接头螺栓32DIN 2093 disc springs 盘型弹簧垫圈33DIN 258 taper pins with threaded end ISO 8737 GB/T 881 螺尾锥销34DIN 261 T－head bolts T 型头螺栓35DIN 28129 Clamp nuts for covers36DIN 3017 hose clamps 喉箍37DIN 315 wing nuts with rounded wings GB/T 62 蝶型螺母38DIN 316 wing screws Amercia form 蝶型螺钉(美制)39DIN 317 wing screws Germany form 蝶型螺钉(德制)40DIN 319 ball knobs 圆球型盖型螺母41DIN 3404 lubricating nipples, button head JB/T 7490.1 直通式压注油杯42DIN 3567 shackles for conduilts 管夹43DIN 3570 stirrup bolts (U－bolts) U 型螺栓44DIN 404 slotted capstan screws GB/T 832 开槽带孔球面圆柱头螺钉45DIN 417 slotted set srews with full dog point EN 27435 ISO 7435 GB/T 75 开槽长圆柱端紧定螺钉46DIN 427 slotted set srews with chamfered end ISO 234247DIN 431 pipe nuts with thread as in ISO 228－148DIN 432 external tab washers (locking tab washers) GB/T 856 外舌止动垫圈49DIN 433 washers for cheese head screws ISO 7092 GB/T 848 小垫圈 A 级50DIN 434square taper washers for U－section GB/T 853 槽钢用方斜垫圈51DIN 435 square taper washers for I－sections GB/T 852 工字钢用方斜垫圈52DIN 436 square washers 方垫圈序号DIN 英文名称EN ISO GB 中文名称53DIN 438 slotted set screws with cup point EN 27436 ISO 7436 GB/T 74 开槽凹端紧定螺钉54DIN 439－1 Hexagon thin nuts (unchamfered) －Product grade B ISO 4036 GB/T 6174 六角薄螺母无倒角55DIN 439－2 Hexagon thin nuts (chamfered) －Product grades Aand BISO 4035 GB/T 6172.1 六角薄螺母56DIN 440 rounds washers for wood constructions ISO 8675ISO 7094木螺钉专用垫圈57DIN 443 sealing caps, push－in type 密封帽58DIN 444 eyebolts GB/T 798 活节螺栓59DIN 462 internal tab washers 内舌止动垫圈60DIN 463 tab washers with short and long tab at right angles GB/T 855 双耳止动垫圈61DIN 464 knurled thumb screws with collar GB/T 834 滚花高头螺钉62DIN 465 slotted knurled thumb screws with collar 开槽滚花高头螺钉63DIN 466 knurled nuts with collar GB/T 806 滚花高螺母64DIN 467 knurled nuts GB/T 807 滚花薄螺母65DIN 470 sealing washers 锁紧垫圈66DIN 471 retaining rings for shafts (external), circlips GB/T 894.1 轴用弹性挡圈－A 型67DIN 472 retaining rings for bores (internal), circlips GB/T 893.1 孔用弹性挡圈－A 型68DIN 478 square head bolts with collar 方头带垫螺栓69DIN 479 square head bolts with half dog point 方头圆柱底端螺栓70DIN 480 square head bolts with collar, half dog point androunded end方头带垫半圆底端螺栓71DIN 508 T－slot nuts ISO 299 T 型槽螺母72DIN 525 single end studs 单头螺柱73DIN 529 masonry bolts GB/T 799 地脚螺栓74DIN 546 slotted round nuts GB/T 817 带槽圆螺母75DIN 547 round nuts with drilled holes in one face GB/T 815 端面带孔圆螺母序号DIN 英文名称EN ISO GB 中文名称76DIN 551 slotted set screws with flat point EN 24766 ISO 4766 GB/T 73 开槽平端紧定螺钉77DIN 553 slotted set screws with cone point EN 27434 ISO 7434 GB/T 71 开槽锥端紧定螺钉78DIN 555 hexagon nuts ISO 4034 GB/T 41 六角螺母 C 级79DIN 557 Product grade C square nuts GB/T 39 方螺母 C 级80DIN 558 hexagon screws ISO 4018 GB/T 5781 六角头螺栓全螺纹 C 级81DIN 561 hexagon set screws with full dog point 六角头圆柱端紧定螺钉82DIN 562 square thin nuts －Product grade B 方型薄螺母 B 级83DIN 571 hexagon head wood screws (coach screws) GB/T 102 六角头木螺钉84DIN 580 lifting eye bolts ISO 3266 GB/T 825 吊环螺钉85DIN 582 lifting eye nuts 吊环螺母86DIN 601 hexagon bolts ISO 4016 GB/T 5780 六角头螺栓 C 级87DIN 603 mushroom head square neck bolts (carriage bolts) ISO 8677 GB/T 14 大半圆头方颈螺栓88DIN 604 flat countersunk nib bolts 沉头带插销马车螺栓89DIN 605 flat countersunk long square neck bolts 沉头长方颈马车螺栓90DIN 607 cup head nib bolts 半圆头带插销马车螺栓91DIN 608 flat countersunk short square neck bolts 沉头短方颈马车螺栓92DIN 609 hexagon fitted bolts, long thread 六角头精配螺栓（长螺纹）93DIN 610 hexagon fitted bolts, short thread 六角头精配螺栓（短螺纹）94DIN 6303 Knurled nuts95DIN 6319 spherical washers, conical seats96DIN 6325 parallel pins ISO 8734 GB/T 119.2 圆柱销淬硬钢和马氏体不锈钢97DIN 6330 hexagon nuts, 1.5d GB/T 56 厚六角螺母98DIN 6331 hexagon nuts, 1.5d with collar 厚六角法兰面螺母99DIN 6334 hexagon nuts, 3d 长六角螺母100DIN 653 knurled thumb screws thin type GB/T 835 滚花平头螺钉101DIN 660round head rivets ISO 1051 GB/T 867 半圆头铆钉序号DIN 英文名称EN ISO GB 中文名称102DIN 661 countersunk head rivets ISO 1051 GB/T 869 沉头铆钉103DIN 662 raised contersunk head rivets ISO 1051 GB/T 870 半沉头铆钉104DIN 674 mushroom head rivets ISO 1051 大扁头铆钉105DIN 6797 (A) toothed lock washers (with external teeth) GB/T 862.1 外齿锁紧垫圈106DIN 6797 (J) toothed lock washers (with internal teeth) GB/T 861.1 内齿锁紧垫圈107DIN 6798 (A) serrated lock washers (with external teeth) GB/T 862.2 外锯齿锁紧垫圈108DIN 6798 (J) serrated lock washers (with internal teeth) GB/T 861.2 内锯齿锁紧垫圈109DIN 6799 retaining rings for shafts (E－rings), circlips GB/T 896 开口挡圈110DIN 6885 parallel keys(form A ) ISO 773/2491 平键（A 型）111DIN 6888 woodruff keys ISO 3912 GB/T 1099 半圆键112DIN 6899 thimbles 嵌环（支撑环）113DIN 6900－1 screws and washers assemblies ISO 10644 GB/T 9074.1 螺栓或螺钉和平垫圈组合件114DIN 6901 tapping screws and washers assemblies ISO 10510 GB/T 9074.18 自攻螺钉和平垫圈组合件115DIN 6912 hexagon socket thin head cap screws with pilot recessfor wrench key矮头内六角圆柱头螺钉116DIN 6914 High－strength hexagon head bolts with large widthsacross flats for structural steel boltingGB/T 18230.1GB/T 18230.2栓接结构用大六角头螺栓螺纹长度按GB/T 3106 C 级8.8 和10.9 级栓接结构用大六角头螺栓短螺纹长度C 级8.8 和10.9 级117DIN 6915 Steel hexagon nuts with large widths across flats forhigh－strength structural boltingGB/T 18230.4 栓接结构用1 型大六角螺母 B 级10 级118DIN 6916 round washers for friction grip bolts GB/T 18230.5 栓接结构用平垫圈淬火并回火119DIN 6917 spuare taper washers for friction grip bolts on T－sections120DIN 6921 Hexagon flange bolt EN 1665121DIN 6922 EN 1665E:\lee\技术文档\DIN 和ISO、国内标准参考对照表－紧固件.doc page 5 of 10序号DIN 英文名称EN ISO GB 中文名称122DIN 6923 hexagon flange nuts EN 1661 ISO 4161 GB/T 6177.1 六角法兰面螺母123DIN 6924 Prevailing torque type hexagon nuts with nylon insert ISO 7040 GB/T 889.1 1 型非金属嵌件六角锁紧螺母ISO 10512 GB/T 889.2 1 型非金属嵌件六角锁紧螺母细牙124DIN 6925 prevailing torque type hexagon nuts, all metallic nuts ISO 7042 GB/T 6185.1 2 型全金属六角锁紧螺母125DIN 6926 Prevailing torque type hexagon nuts with flange (with EN 1663 ISO 7043 GB/T 6183.1 非金属嵌件六角法兰面锁紧螺母nylon insert) EN 1666 ISO 12125 GB/T 6183.2 非金属嵌件六角法兰面锁紧螺母细牙126DIN 6927 Prevailing torque type all metal hexagon nuts with flange EN 1664 ISO 7044 GB/T 6187.1 全金属六角法兰面锁紧螺母EN 1667 ISO 12126 GB/T 6187.2 全金属六角法兰面锁紧螺母细牙127DIN 7 parallel pins ISO 2338 GB/T 119.1 圆柱销不淬硬钢和奥氏体不锈钢128DIN 703 adjusting rings, heavy range (shafting collars)129DIN 705 adjusting rings, light range (shafting collars)130DIN 70952 tab washers for slotted round nuts GB/T 858 圆螺母用止退垫圈131DIN 7337 blind rivets GB/T12617/12618开口型抽芯铆钉（沉头、扁圆头）132DIN 7338 rivets for brake and clutch lining GB/T 875/975 扁平头半空心/全空心铆钉133DIN 7343 spiral pins ISO 8750 GB/T 879.4 弹性圆柱销卷制标准型134DIN 7344 Spiral pin, heavy duty ISO 8748 GB/T 879.3 弹性圆柱销卷制重型135DIN 7346 spring pins, light type ISO 13337 GB/T 879.2 弹性圆柱销直槽轻型136DIN 7349 washers for bolts with heavy type spring pins 重型弹性圆柱销用垫圈137DIN 741 wire rope clips 卡头138DIN 7500 threadforming screws for ISO －metric thread ISO 公制螺纹螺钉(多种头型)6 10序号DIN 英文名称EN ISO GB 中文名称ISO 10666 GB/T 3098.11 紧固件机械性能自钻自攻螺钉ISO 15480 GB/T 15856.5 六角凸缘自钻自攻螺钉139DIN 7504 self－drilling tapping screwsISO 15481 GB/T 15856.1 十字槽盘头自钻自攻螺钉ISO 15482 GB/T 15856.2 十字槽沉头自钻自攻螺钉ISO 15483 GB/T 15856.3 十字槽半沉头自钻自攻螺钉140DIN 7513 thread cutting screws 开槽切削螺纹螺钉(多种头型)141DIN 7516 thread cutting screws cross recess 十字槽切削螺纹螺钉(多种头型)142DIN 787 T－slot screws ISO 299 T 型槽螺钉143DIN 7965 tee nuts with pronge T 型四爪螺母144DIN 7968 hexagon head fitted bolts for steel structures145DIN 7971 pan head tapping screws with slot ISO 1481 GB/T 5282 开槽盘头自攻螺钉146DIN 7972 countersunk flat head tapping screws with slot ISO 1482 GB/T 5283 开槽沉头自攻螺钉147DIN 7973 raised countersunk oval head tapping screws with slot ISO 1483 GB/T 5284 开槽半沉头自攻螺钉148DIN 7976 hexagon tapping screws ISO 1479 GB/T 5285 六角头自攻螺钉149DIN 7980 spring lock washers for screws with cylindrical heads 圆柱头螺钉用弹簧垫圈150DIN 7981 pan head tapping screws with cross recessed ISO 7049 GB/T 845 十字槽盘头自攻螺钉151DIN 7982 countersunk flat head tapping screws with crossrecessedISO 7050 GB/T 846 十字槽沉头自攻螺钉152DIN 7983 raised countersunk oval head tapping screws with crossrecessedISO 7051 GB/T 847 十字槽半沉头自攻螺钉153DIN 7984 hexagon socket head cap screws with, reduced head 薄型内六角圆柱头螺钉154DIN 7985 pan head screws with cross recessed ISO 7045 GB/T 818 十字槽盘头螺钉155DIN 7989 washers for steel structures序号DIN 英文名称EN ISO GB 中文名称GB/T 5780 六角头螺栓 C 级156DIN 7990 hexagon head bolts for steel structuresGB/T 41 六角螺母 C 级GB/T 6170 1 型六角螺母157DIN 7991 hexagon socket countersunk head screws ISO 10642 GB/T 70.3 内六角沉头螺钉158DIN 7993 roundwire snap rings for shafts GB/T 895.2 轴用钢丝挡圈159DIN 7995 cross recessed raised countersunk head wood screws GB/T 952 十字槽半沉头木螺钉160DIN 7996 cross recessed round head wood screws GB/T 950 十字槽圆头木螺钉161DIN 7997 cross recessed countersunk head wood screws GB/T 951 十字槽沉头木螺钉162DIN 8140 coil inserts, coarse, fine thread, self locking 螺纹护套（普通\自锁等）163DIN 835 studs－metal (end=2d) GB/T 900 双头螺柱bm=2d164DIN 84 slotted cheese head screws ISO 1207 GB/T 65 开槽圆柱头螺钉165DIN 85 slotted pan head screws ISO 1580 GB/T 67 开槽盘头螺钉166DIN 9021 washers, outside diameter appro.3d ISO 7093－1 GB/T 96.1 大垫圈 A 级ISO 7093－2 GB/T 96.2 大垫圈 C 级167DIN 906 hexagon socket pipe plugs, conical thread 内六角锥型闭锁螺钉168DIN 908 hexagon socket screw plugs, cyl. thread 内六角直型闭锁螺钉169DIN 909 hexagon head pipe plugs, conical thread 外六角锥型闭锁螺钉170DIN 910 hexagon head screw plugs, cyl.thread 外六角直型闭锁螺钉171DIN 911 socket wrenches ISO 2936 内六角扳手172DIN 912 hexagon socket cap screws ISO 4762 GB/T 70.1 内六角圆柱头螺钉173DIN 913 hexagon socket set screws with flat point ISO 4026 GB/T 77 内六角平端紧定螺钉174DIN 914 hexagon socket set screws with cone point ISO 4027 GB/T 78 内六角锥端紧定螺钉175DIN 915 hexagon socket set screws with dog point ISO 4028 GB/T 79 内六角圆柱端紧定螺钉176DIN 916 hexagon socket set screws with cup point ISO 4029 GB/T 80 内六角凹端紧定螺钉177DIN 917 hexagon cap nuts 薄型盲螺母178DIN 920 slotted short cheese head screws 开槽小圆柱头螺钉序号DIN 英文名称EN ISO GB 中文名称179DIN 921 slotted large cheese head screws GB/T 833 开槽大圆柱头螺钉180DIN 923 slotted pan head screws with shoulder GB/T 830 开槽圆柱头轴位螺钉181DIN 927 slotted shoulder screws GB/T 831 开槽无头轴位螺钉182DIN 928 square weld nuts GB/T 13680 焊接方螺母183DIN 929 hexagon weld nuts GB/T 13681 焊接六角螺母184DIN 93 tab washers with long tab GB/T 854 单耳止动垫圈185DIN 931－1 hexagon head screws ISO 4014 GB/T 5782 六角头螺栓186DIN 933 hexagon head screws－Product gardes A and B ISO 4017 GB/T 5783 六角头螺栓全螺纹187DIN 934 hexagon full nuts ISO 4032 GB/T 6170 1 型六角螺母ISO 8673 GB/T 6171 1 型六角螺母细牙188DIN 935 Hexagon slotted nuts and castle nuts ISO 7035 GB/T 6178 开槽六角螺母189DIN 936 hexagon thin nuts ISO 4035 GB/T 6172.1 六角薄螺母190DIN 937 hexagon thin slotted and castle nuts ISO 7038 GB/T 6181 六角开槽薄螺母－A 和B 级191DIN 938 studs metal (end=1d) GB/T 897 双头螺柱bm=1d 192DIN 939 studs metal (end=1.25d) GB/T 898 双头螺柱bm=1.25d 193DIN 94 split pins ISO 1234 GB/T 91 开口销194DIN 940 studs metal (end=1.5d) GB/T 899 双头螺柱bm=1.5d 195DIN 95 slotted raised countersunk head wood screws GB/T 101 开槽半沉头木螺钉196DIN 96 slotted round head wood screws GB/T 99 开槽圆头木螺钉197DIN 960 hexagon head bolts, metric fine pitch thread ISO 8765 GB/T 5785 六角头螺栓细牙198DIN 961 hexagon head bolts, metric fine pitch thread ISO 8676 GB/T 5786 六角头螺栓细牙全螺纹199DIN 962 additional shapes and versions for bolts 头部穿孔六角头螺栓200DIN 963 slotted countersunk head screws ISO 2009 GB/T 68 开槽沉头螺钉201DIN 964 slotted raised countersunk oval head screws ISO 2010 GB/T 69 开槽半沉头螺钉序号DIN 英文名称EN ISO GB 中文名称ISO 7046－1 GB/T 819.1 十字槽沉头螺钉第1 部分：钢4.8 级202DIN 965 cross recessed countersunk head screwsISO 7046－2 GB/T 819.2 十字槽沉头螺钉第2 部分：钢8.8、不锈钢A2－70 和有色金属CU2 或CU3203DIN 966 cross recessed raised countersunk head screws ISO 7047 GB/T 820 十字槽半沉头螺钉204DIN 97 slotted countersunk head wood screws GB/T 100 开槽沉头木螺钉205DIN 970 Hexagon nuts, style 1, Product grades A and B ISO 4032 GB/T 6170 1 型六角螺母206DIN 971－1 Hexagon nuts, style 1, with metric fine pitch threadProduct grades A and BISO 8673 GB/T 6171 1 型六角螺母细牙207DIN 971－2 Hexagon nuts, style 2, with metric fine pitch thread －Product grades A and BISO 8674 GB/T 6176 2 型六角螺母细牙208DIN 972 hexagon nuts, Product grade C ISO 4034 GB/T 41 六角螺母 C 级209DIN 975 threaded rods(studDIN gs) GB/T 15389 螺杆210DIN 976 threaded pins(stud bolts) 螺纹销211DIN 977 Hexagon weld nuts with flange212DIN 979 Hexagon thin slotted and castle nuts with metric coarseand fine pitch thread－Product grade A and B六角开槽薄螺母（2 型）213DIN 980 prevailling torque type hexagon nuts, all metall nuts ISO 7042 GB/T 6185.1 2 型全金属六角锁紧螺母ISO 10513 GB/T 6185.2 2 型全金属六角锁紧螺母214DIN 981 locknuts ISO 2982－2215DIN 982 prevailling torque type hexagon nuts, heavy type, with ISO 7040 GB/T 889.1 1 型非金属嵌件六角锁紧螺母nylon insert ISO 10512 GB/T 889.2 1 型非金属嵌件六角锁紧螺母细牙216DIN 985 prevailling torque type hexagon nuts, heavy type, withnylon insertISO 10511 GB/T 6172.2 非金属嵌件六角锁紧薄螺母217DIN 986 prevailling torque typedomed capnuts with nylon insert 六角盖型尼龙锁紧螺母218DIN 988 shim rings 配合垫圈与支承垫圈E:\lee\技术文档\DIN 和ISO、国内标准参考对照表－紧固件.doc page 10 of 10。
DIN、EN、ISO、GB标准件对照表DIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 1 DIN 1052 DIN 11024 DIN 1151 DIN 125－1 DIN 125－2 DIN 126 DIN 127－1 DIN 127－2 DIN 128 DIN 13257 DIN 137 DIN 1440 DIN 1441 DIN 1444 DIN 1471 DIN 1472 DIN 1473 DIN 1474 DIN 1475 DIN 1476 DIN 1477 DIN 1479 DIN 1480 DIN 1481 DIN 1587 taper pins washers for timber connectors spring cotters round plain head nails plain washers without chamfer plain washers with chamfer plain washers spring lock washers with tang ends spring lock washers with square ends curved spring lock washers belting bolts (elevator bolts) wave spring washers plain washers for clevis pins Washers, Type Coarse for Bolts clevis pins with head grooved pins, taper grooved grooved pins, taper grooved half length grooved pins, parallel grooved full length grooved pins, reserve grooved half length grooved pins, centre grooved grooved pins with round head grooved pins with countersunk head turnuckles(centre parts), made out of hexagon bar turnuckles with eye bolt and hook bolt spring pins, heavy type hexagon domed cap nuts ISO 8752 GB/T 879.1 GB/T 802 EN 22341 ISO 2341 ISO 8744 ISO 8745 ISO 8740 ISO 8741 ISO 8742 ISO 8746 ISO 8747 GB/T 882 GB/T 13829.2 GB/T 13829.2 GB/T 13829.1 GB/T 13829.2 GB/T 13829.1 GB/T 13829.3 GB/T 13829.3 EN 28738 ISO 8738 GB/T 955 GB/T 97.3 ISO 7089 ISO 7090 ISO 7091 GB/T 97.1 GB/T 97.2 GB/T 95 GB/T 7244 GB/T 93 GB/T 7245 英文名称 EN EN 22339 ISO ISO 2339 GB GB/T 117 圆锥销木材连接用垫圈弹簧卡子沉头钢钉平垫圈平垫圈平垫圈 A级倒角型 C级 A级中文名称1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26重型弹簧垫圈标准弹簧垫圈鞍形弹簧垫圈平板螺栓波形弹性垫圈销轴用平垫圈螺栓用粗制垫圈销轴槽销槽销槽销槽销槽销槽销槽销锥槽（A 型）锥槽（B 型）平行沟槽（B 型）锥槽（C 型）平行沟槽（C 型）圆头、沉头（A 型）圆头、沉头（B 型）六角螺母棒花篮螺栓弹性圆柱销直槽组合式盖形螺母 page 1 of 10 重型E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 1804 DIN 1816 DIN 18182 DIN 186 DIN 188 DIN 2093 DIN 258 DIN 261 DIN 28129 DIN 3017 DIN 315 DIN 316 DIN 317 DIN 319 DIN 3404 DIN 3567 DIN 3570 DIN 404 DIN 417 DIN 427 DIN 431 DIN 432 DIN 433 DIN 434 DIN 435 DIN 436 英文名称 slotted round nuts for hook spanner round nuts with set holes dry wall screws T－head bolts with square neck T－head bolts with double nip disc springs taper pins with threaded end T－head bolts Clamp nuts for covers hose clamps wing nuts with rounded wings wing screws Amercia form wing screws Germany form ball knobs lubricating nipples, button head shackles for conduilts stirrup bolts (U－bolts) slotted capstan screws slotted set srews with full dog point slotted set srews with chamfered end pipe nuts with thread as in ISO 228－1 external tab washers (locking tab washers) washers for cheese head screws square taper washers for U－section square taper washers for I－sections square washers ISO 7092 GB/T 856 GB/T 848 GB/T 853 GB/T 852 外舌止动垫圈小垫圈 A级 EN 27435 ISO 7435 ISO 2342 GB/T 832 GB/T 75 JB/T 7490.1 GB/T 62 喉箍蝶型螺母蝶型螺钉(美制) 蝶型螺钉(德制) 圆球型盖型螺母直通式压注油杯管夹 U 型螺栓开槽带孔球面圆柱头螺钉开槽长圆柱端紧定螺钉ISO 8737 GB/T 881 GB/T 37 EN ISO GB 中文名称开槽圆螺母（配合沟头扳手）圆螺母（带插销孔）干壁钉（墙板钉） T 型槽用螺栓 T 型双接头螺栓盘型弹簧垫圈螺尾锥销 T 型头螺栓27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52槽钢用方斜垫圈工字钢用方斜垫圈方垫圈 page 2 of 10E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 438 DIN 439－1 DIN 439－2 英文名称 slotted set screws with cup point Hexagon thin nuts (unchamfered) －Product grade B Hexagon thin nuts (chamfered) －Product grades A and B rounds washers for wood constructions sealing caps, push－in type eyebolts internal tab washers tab washers with short and long tab at right angles knurled thumb screws with collar slotted knurled thumb screws with collar knurled nuts with collar knurled nuts sealing washers retaining rings for shafts (external), circlips retaining rings for bores (internal), circlips square head bolts with collar square head bolts with half dog point square head bolts with collar, half dog point and rounded end T－slot nuts single end studs masonry bolts slotted round nuts round nuts with drilled holes in one face GB/T 799 GB/T 817 GB/T 815 ISO 299 GB/T 894.1 GB/T 893.1 GB/T 806 GB/T 807 GB/T 855 GB/T 834 GB/T 798 EN EN 27436 ISO ISO 7436 ISO 4036 ISO 4035 ISO 8675 ISO 7094 GB GB/T 74 GB/T 6174 GB/T 6172.1 中文名称开槽凹端紧定螺钉六角薄螺母六角薄螺母无倒角53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75DIN 440 DIN 443 DIN 444 DIN 462 DIN 463 DIN 464 DIN 465 DIN 466 DIN 467 DIN 470 DIN 471 DIN 472 DIN 478 DIN 479 DIN 480 DIN 508 DIN 525 DIN 529 DIN 546 DIN 547木螺钉专用垫圈密封帽活节螺栓内舌止动垫圈双耳止动垫圈滚花高头螺钉开槽滚花高头螺钉滚花高螺母滚花薄螺母锁紧垫圈轴用弹性挡圈－A 型孔用弹性挡圈－A 型方头带垫螺栓方头圆柱底端螺栓方头带垫半圆底端螺栓 T 型槽螺母单头螺柱地脚螺栓带槽圆螺母端面带孔圆螺母 page 3 of 10E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 551 DIN 553 DIN 555 DIN 557 DIN 558 DIN 561 DIN 562 DIN 571 DIN 580 DIN 582 DIN 601 DIN 603 DIN 604 DIN 605 DIN 607 DIN 608 DIN 609 DIN 610 DIN 6303 DIN 6319 DIN 6325 DIN 6330 DIN 6331 DIN 6334 DIN 653 DIN 660 英文名称 slotted set screws with flat point slotted set screws with cone point hexagon nuts Product grade C square nuts hexagon screws hexagon set screws with full dog point square thin nuts －Product grade B hexagon head wood screws (coach screws) lifting eye bolts lifting eye nuts hexagon bolts mushroom head square neck bolts (carriage bolts) flat countersunk nib bolts flat countersunk long square neck bolts cup head nib bolts flat countersunk short square neck bolts hexagon fitted bolts, long thread hexagon fitted bolts, short thread Knurled nuts spherical washers, conical seats parallel pins hexagon nuts, 1.5d hexagon nuts, 1.5d with collar hexagon nuts, 3d knurled thumb screws thin type round head rivets ISO 1051 GB/T 835 GB/T 867 ISO 8734 GB/T 119.2 GB/T 56 圆柱销淬硬钢和马氏体不锈钢厚六角螺母厚六角法兰面螺母长六角螺母滚花平头螺钉半圆头铆钉 page 4 of 10 ISO 4016 ISO 8677 GB/T 5780 GB/T 14 ISO 3266 GB/T 102 GB/T 825 ISO 4018 EN EN 24766 EN 27434 ISO ISO 4766 ISO 7434 ISO 4034 GB GB/T 73 GB/T 71 GB/T 41 GB/T 39 GB/T 5781 中文名称开槽平端紧定螺钉开槽锥端紧定螺钉六角螺母方螺母 C级 C级 C级76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101六角头螺栓全螺纹六角头圆柱端紧定螺钉方型薄螺母六角头木螺钉吊环螺钉吊环螺母六角头螺栓 C级 B级大半圆头方颈螺栓沉头带插销马车螺栓沉头长方颈马车螺栓半圆头带插销马车螺栓沉头短方颈马车螺栓六角头精配螺栓（长螺纹）六角头精配螺栓（短螺纹）E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 661 DIN 662 DIN 674 DIN 6797 (A) DIN 6797 (J) DIN 6798 (A) DIN 6798 (J) DIN 6799 DIN 6885 DIN 6888 DIN 6899 DIN 6900－1 DIN 6901 DIN 6912 英文名称countersunk head rivets raised contersunk head rivets mushroom head rivets toothed lock washers (with external teeth) toothed lock washers (with internal teeth) serrated lock washers (with external teeth) serrated lock washers (with internal teeth) retaining rings for shafts (E－rings), circlips parallel keys(form A ) woodruff keys thimbles screws and washers assemblies tapping screws and washers assemblies hexagon socket thin head cap screws with pilot recess for wrench key GB/T 18230.1 ISO 10644 ISO 10510 GB/T 9074.1 GB/T 9074.18 ISO 773/2491 ISO 3912 GB/T 1099 EN ISO ISO 1051 ISO 1051 ISO 1051 GB/T 862.1 GB/T 861.1 GB/T 862.2 GB/T 861.2 GB/T 896 GB GB/T 869 GB/T 870 沉头铆钉半沉头铆钉大扁头铆钉外齿锁紧垫圈内齿锁紧垫圈外锯齿锁紧垫圈内锯齿锁紧垫圈开口挡圈平键（A 型）半圆键嵌环（支撑环）螺栓或螺钉和平垫圈组合件自攻螺钉和平垫圈组合件矮头内六角圆柱头螺钉栓接结构用大六角头螺栓 GB/T 3106 C 级螺纹长度按中文名称102 103 104 105 106 107 108 109 110 111 112 113 114 115 116DIN 6914High－strength hexagon head bolts with large widths across flats for structural steel bolting8.8 和 10.9 级短螺纹长度GB/T 18230.2栓接结构用大六角头螺栓 C级 8.8 和 10.9 级117 118 119 120 121DIN 6915 DIN 6916 DIN 6917 DIN 6921 DIN 6922Steel hexagon nuts with large widths across flats for high－strength structural bolting round washers for friction grip bolts spuare taper washers for friction grip bolts on T－sections Hexagon flange bolt EN 1665 EN 1665GB/T 18230.4 GB/T 18230.5栓接结构用 1 型大六角螺母栓接结构用平垫圈B级10 级淬火并回火E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.doc page 5 of 10DIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 6923 DIN 6924 DIN 6925 DIN 6926 hexagon flange nuts Prevailing torque type hexagon nuts with nylon insert prevailing torque type hexagon nuts, all metallic nuts Prevailing torque type hexagon nuts with flange (with nylon insert) Prevailing torque type all metal hexagon nuts with flange parallel pins adjusting rings, heavy range (shafting collars) adjusting rings, light range (shafting collars) tab washers for slotted round nuts blind rivets rivets for brake and clutch lining spiral pins Spiral pin, heavy duty spring pins, light type washers for bolts withheavy type spring pins wire rope clips threadforming screws for ISO －metric thread ISO 8750 ISO 8748 ISO 13337 GB/T 858 GB/T 12617/12618 GB/T 875/975 GB/T 879.4 GB/T 879.3 GB/T 879.2 圆螺母用止退垫圈开口型抽芯铆钉（沉头、扁圆头）扁平头半空心/全空心铆钉弹性圆柱销弹性圆柱销弹性圆柱销卷制卷制直槽标准型重型轻型EN 1663 EN 1666 EN 1664 EN 1667 英文名称EN EN 1661 ISO ISO 4161 ISO 7040 ISO 10512 ISO 7042 ISO 7043 ISO 12125 ISO 7044 ISO 12126 ISO 2338 GB GB/T 6177.1 GB/T 889.1 GB/T 889.2 GB/T 6185.1 GB/T 6183.1 GB/T 6183.2 GB/T 6187.1 GB/T 6187.2 GB/T 119.1 六角法兰面螺母 1 型非金属嵌件六角锁紧螺母 1 型非金属嵌件六角锁紧螺母 2 型全金属六角锁紧螺母非金属嵌件六角法兰面锁紧螺母非金属嵌件六角法兰面锁紧螺母全金属六角法兰面锁紧螺母全金属六角法兰面锁紧螺母圆柱销细牙细牙细牙中文名称122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138DIN 6927 DIN 7 DIN 703 DIN 705 DIN 70952 DIN 7337 DIN 7338 DIN 7343 DIN 7344 DIN 7346 DIN 7349 DIN 741 DIN 7500 不淬硬钢和奥氏体不锈钢重型弹性圆柱销用垫圈卡头 ISO 公制螺纹螺钉(多种头型)E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.doc page 6 of 10DIN 和 ISO、国内标准参考对照表－紧固件序号DIN 英文名称EN ISO ISO 10666 ISO 15480 GB GB/T 3098.11 GB/T 15856.5 GB/T 15856.1 GB/T 15856.2 GB/T 15856.3 紧固件机械性能中文名称自钻自攻螺钉六角凸缘自钻自攻螺钉十字槽盘头自钻自攻螺钉十字槽沉头自钻自攻螺钉十字槽半沉头自钻自攻螺钉开槽切削螺纹螺钉(多种头型) 十字槽切削螺纹螺钉(多种头型)139DIN 7504self－drilling tapping screwsISO 15481 ISO 15482 ISO 15483140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155DIN 7513 DIN 7516 DIN 787 DIN 7965 DIN 7968 DIN 7971 DIN 7972 DIN 7973 DIN 7976 DIN 7980 DIN 7981 DIN 7982 thread cutting screws thread cutting screws cross recess T－slot screws tee nuts with pronge hexagon head fitted bolts for steel structures pan head tapping screws with slot countersunk flat head tapping screws with slot raised countersunk oval head tapping screws with slot hexagon tapping screws spring lock washers for screws with cylindrical heads pan head tapping screws with cross recessed countersunk flat head tapping screws with cross recessed raised countersunk oval head tapping screws with cross recessed hexagon socket head cap screws with, reduced head pan head screws with cross recessed washers for steel structures ISO 7045 GB/T 818 ISO 7049 ISO 7050 GB/T 845 GB/T 846 ISO 1481 ISO 1482 ISO 1483 ISO 1479 GB/T 5282 GB/T 5283 GB/T 5284 GB/T 5285 ISO 299T 型槽螺钉 T 型四爪螺母开槽盘头自攻螺钉开槽沉头自攻螺钉开槽半沉头自攻螺钉六角头自攻螺钉圆柱头螺钉用弹簧垫圈十字槽盘头自攻螺钉十字槽沉头自攻螺钉DIN 7983 DIN 7984 DIN 7985 DIN 7989ISO 7051GB/T 847十字槽半沉头自攻螺钉薄型内六角圆柱头螺钉十字槽盘头螺钉E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docpage 7 of 10。
1.销->具体信息名称: DIN94(ISO1234)开口销说明:->具体信息名称: DIN7979(GB120.2)内螺纹圆柱销说明: 内径规格:M4 - M24->具体信息名称: DIN7(GB119.2)圆柱销说明:->具体信息名称: DIN6325圆柱销说明:->具体信息名称: DIN1481(ISO8752)弹性圆柱销说明:->具体信息名称: DIN1475(GB13829.2)开槽销说明:->具体信息名称: DIN1(GB117)圆锥销说明:2.挡圈：->具体信息名称: DIN7993(GB921)钢丝锁圈说明:->具体信息名称: DIN6799(GB896)开口挡圈说明:->具体信息名称: DIN472孔用弹性挡圈说明:->具体信息名称: DIN471轴用弹性挡圈说明:3.锁紧垫圈：->具体信息名称: DIN7980弹簧锁紧垫圈说明: Single Coil Spring Lock Washers->具体信息名称: DIN6798V内锯齿锁紧垫圈(V型)说明: Serrated Countersunk Lock Washers External Gear->具体信息名称: DIN6798J内锯齿锁紧垫圈说明: Toothed Lock Serrated Internally Washers->具体信息名称: DIN6798外锯齿锁紧垫圈说明: Serrated Lock Washers External Gear Type A->具体信息名称: DIN6797J内齿锁紧垫圈说明: 垫圈内径: 1.7 - 7.4垫圈外径: 3.6 - 12.5->具体信息名称: DIN6797A外齿锁紧垫圈说明: 垫圈内径: 1.7 - 7.4垫圈外径: 3.6 - 12.54.弹垫：->具体信息名称: DIN137B波形弹性垫圈说明: Waved Spring Washers B->具体信息名称: DIN137鞍形弹性垫圈说明: Waved Spring Washers Type A->具体信息名称: DIN127B弹簧垫圈说明: Single Coil Lock Washers5.平垫：->具体信息名称: DIN988薄型平垫圈说明: Shim Rings->具体信息名称: DIN9021大平垫圈说明: Flat Washers->具体信息名称: DIN7349平垫圈(用在弹性圆柱销上)说明: Washers->具体信息名称: DIN433平垫圈说明: Washers->具体信息名称: DIN125B平垫圈说明: Product W/O Chamfer Washers->具体信息名称: DIN125A平垫圈说明: Product W/O Chamfer Washers6.螺栓：->具体信息名称: DIN933外六角螺栓(全牙)说明: Hexagon Head Bolts->具体信息名称: DIN931外六角螺栓(半牙)说明: Hexagon Head Bolts->具体信息名称: DIN6921六角法兰螺栓说明: Hexagon Flange Bolts->具体信息名称: DIN604沉头带榫螺栓说明: Flat Countersunk Nib Bolts->具体信息名称: DIN261T型螺栓说明: T-Head Bolts->具体信息名称: DIN444活节螺栓说明: Eye Bolts->具体信息名称: DIN939双头螺栓说明: Studs Thread->具体信息名称: DIN603马车螺栓(半圆头方颈螺栓)说明: Mushroom Head Square Bolts->具体信息名称: DIN316蝶型螺栓说明: Wing Screws->具体信息名称: DIN580吊环螺栓说明: Lifting Eyebolts7.螺钉：->具体信息名称: DIN7991内六角沉头螺钉说明: Hexagon socket Countersunk head Screws。
