L2SA1036KLT1G中文资料

050816WebSite In our continuing strategy to deliver unparalleled circuit protection solutions,technical expertise and application leadership, we proudly introduce theWICKMANN Group and its products to the Littelfuse portfolio.VDEM INIA INIATURETURE F USEHOLDERS Holder / No. 852SpecificationsStandardIEC 60127-6UL 512CSA C22.2. No.39ApprovalsVDE Report SEMKOUL Recognized CSA SEVMounting(2) Solder pins 0.5mm x 1.1mm Protection Class & CategoryIP 40 (with Cap 855 acc. to IEC 60529)IP 54 (with Cap 856 acc. to IEC 60529)PC2 (IEC 60127-6)MaterialsHolder/Cap:Black Thermoplastic, UL 94V0Sealing Ring:Silicon (Cap 856)Metal Parts:Copper alloy, corrosion protected Terminals:Solderable, tinned Electrical Data (23ºC)Rated Voltage:250VRated Current: 6.3A (VDE/SEMKO)10A (CSA)12A (UL)Rated Power:2W (VDE)Operating T Operating Temperature emperature -40ºC to +85ºC (consider de-rating)Climatic T Climatic Testest -40ºC/+85ºC/21 days (IEC 60068-2-1...3)Stock Conditions+10ºC to +60ºCrelative humidity ≤ 75% yearly average,without dew, maximum value for 30 days - 95%Vibration Resistance24 cycles at 15 min. each (IEC 60068-2-6)10 - 60Hz at 0.75mm amplitude 60 - 500Hz at 10g acceleration Contact Resistance ≤ 5m ΩImpulse Voltage4 kV, 50 Hz, 1 min., dry Insulation Resistance > 103 M Ω (500 VDC, 1 min.)Solderability235ºC, 2 sec. (Wave)350ºC, 1 sec. (Soldering Iron)Soldering Heat Resistance 350ºC, 5 sec. (IEC 60068-2-20)Minimum Cross Section Conducting path - 0.2mm 2MarkingPart No., 250V, Approvals Unit Weight3.2g (852) / 1.8g (855)3.2g (853) / 1.9g (856)Order InformationP a c k a g i n gBulk (100 pcs.)Order NumbersHolder, IP 40No. 852 0000 100Cap, without Ring, IP 40No. 855 0000 100Holder, IP 54No. 853 0000 100Cap, with Ring, IP 54No. 856 0000 100Cap / No. 855PC Mount, Shocksafe5x20mm FusesCap / No. 856Without silicon ring (IP 40)With silicon ring (IP 54)(from front side only)Vertical / 2-PinHolder / No. 853Specifications are subject to change without noticeNote: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.元器件交易网。

ITSM(A) 80 70 60 50 40 30 20 10
0 1
Tj initial=25°C F=50Hz
Number of cycles
10
100
1000
Fig 7: Non repetitive surge peak on-state current for a sinusoidal pulse with width tp<10ms, and corresponding value of I2t.
Symbol
Test Conditions
Quadrant
IGT VGT VGD IL IH * VTM * IDRM IRRM
VD=12V (DC) RL=33Ω VD=12V (DC) RL=33Ω VD=VDRM RL=3.3kΩ IG=1.2 IGT IT= 100mA gate open ITM= 11A tp= 380µs VDRM Rated VRRM Rated
0
0
1
2
3
4
5
6
7
8
Fig 2: Correlation between maximum power dissipation and maximum allowable temperatures (Tamb and Tcase) for different thermal resistances heatsink+contact.
260
Unit A A
A2s A/µs
°C °C °C
Symbol
Parameter
VDRM VRRM
Repetitive peak off-state voltage Tj = 125 °C

A PLUS MAKE YOUR PRODUCTION A-PLUSAVxx16K SeriesDATA SHEETA PLUS INTEGRATED CIRCUITS INC.Address:3 F-10, No. 32, Sec. 1, Chenggung Rd., Taipei, Taiwan 115, R.O.C.(115)台北市南港區成功路㆒段32號3樓之10. TEL: 886-2-2782-9266FAX: 886-2-2782-9255WEBSITE : http: // Sales E-mail:sales@Technology E-mail: service@1. GENERAL DESCRIPTION:The AVH316K , AV0716K , AV1416K , AV2116K , AV2816K and AV4216K are single-chip voice synthesizing CMOS IC. They are low cost with proper functions and can synthesize voice up to 3.5, 7, 14, 21, 28 and 42 seconds, using Aplus 5-bit LOGPCM algorithm. Cus tom er speech data can be programmed into ROM by changing one mask during the device fabrication. Besides, not only the very flexible and functional PowerIO pins (IO1/IO2) are available for user to apply in various applications, but also an interactive development tool “EzSpeech” is ready for user-friendly programming.2. FEATURES:(1). Single power supply can operate from 2.4V to 6.4V (in this range, user can set Rosc as a fixed value).(2). The total voice duration is about 3.5, 7, 14, 21, 28 and 42 seconds those can be partitioned up to 32voice_sections. Each voice_section length is flexible. Besides, there are additional 32 mute_sections.(3). Voice length can be individually up to 3.5, 7, 14, 21, 21 and 21 seconds and voice+mute length can beindividually up to 21 seconds at 6kHz sample rate for each voice_section.(4). Total 96 voice_steps are available for 16 sub_tables. The number of voice_step for each sub_table isflexible, but maximum is 96. For each voice_step, it can specify one voice_section, playback speed and IO1/IO2 output enable options if IO1/IO2 are set as output.(5). Built-in variable oscillator, 16 kinds of playback speed option : ( 3.9k ~ 14.0kHz)A B C D E F G H14.0kHz 12.0kHz 10.5kHz 9.3kHz 8.3kHz 7.5kHz 7.0kHz 6.4kHzI J K L M N O P6.0kHz 5.5kHz 5.2kHz 4.9kHz 4.6kHz 4.4kHz 4.1kHz 3.9kHz(6). IO1 or IO2 can be either input or output pin (Mask option).(7). Optional “Three Triggers Input” (all OKY, IO1 and IO1 are input), “Two Triggers Input” (OKY and IO1 areinput, IO2 is output), or “One Trigger Input” (OKY is input, IO1 and IO2 are output).(A). Each input pin has mask options for Edge/Level, Hold/Unhold and Retrigger/Irritrigger trigger modes.(B). OKY input can choose One-Key Sequential or Random for maximum 16 sub_tables. At One-KeySequential, the Reset function of sub_table sequence can be chosen when other keys are triggered.(C). OKY and IO1 input can choose Toggle On/Off function or not.(D). OKY input can choose CDS+1M、CDS、1M pull-low、10M pull low or floating input type.IO1 and IO2 input can choose CDS+1M、CDS、1M pull-low or floating input type.(E). Each input can choose debounce time: Long debounce for push buttons. Short debounce for fastswitches.(F). Input pin priority：OKY > IO1 > IO2.(8). IO1/IO2 have 7 kinds of output option :(A). Stop_High pulse : high active stop pulse output whenever device stop playing.(B). Busy_High active : high active signal output during playing.(C). Busy_Low active : low active signal output during playing.(D). LED 3Hz flash : 3Hz sink signal output for driving LED during playing at 6kHz sample rate.(E). LED 6Hz flash : 6Hz sink signal output for driving LED during playing at 6kHz sample rate.(F). LED dynamic 2/4 : dynamic sink signal output for driving LED during playing.(G). Synchronous output : arbitrary output with voice, user can edit the Sync signal by PowerIO editor.※Where (D) and (E) is the LED flash rate at 6kHz sample rate. For different sample rate, the LED flash rate is different from original 3Hz or 6Hz.(9). PWM1 and PWM2 can directly drive buzzer or 8, 16, 32 or 64 ohms speaker.(10). The voice length in voice_section must be the multiple of 200Hex, and the mute length in voice_sectionmust be the multiple of 80Hex. But when the voice length in voice_section of “voice + mute” don’t fully use the last 200Hex, the unused voice length is set as mute and combined with the followed mute time. (11). In pure mute voice_section of M00~M31, the mute length must be the multiple of 80Hex. The maximummute length is up to 21 seconds at 6kHz sample rate for each mute voice_section.(12). Oscillator selection:(A). External oscillator: Connect OSC pin to Vdd with a resistor, Rosc.(B). Internal oscillator: Connect OSC pin to GND. (Not suggested because of frequency shift and systemstability)※Input Type Description:Option DescriptionCDS + 1M Normal selection for button trigger.Only 1M pull-low resistance when key-pressed, and 1M+300K(parallel) pull-low resistance when key-released.CDS Internal 300K ohms pull-low resistance, usually for photo-resistor trigger.1M pull-low Internal 1M ohms pull-low resistance, reserve for some special applications. 10M pull-low Internal 10M ohms weak pull-low, usually for touching trigger.Floating No internal resistor connection, usually connected to other output pin or connected to GND by an external resistor.* 10M pull-low option is not available for IO1/IO2 input.1. ㆒般規格:AVH316K、AV0716K、AV1416K、AV2116K、AV2816K、AV4216K ，皆為單晶片晶非低具定另頻放合成 IC，他們都是非常低成本，同時具有相當實用功能的語音 IC 產品。

Rev.1.01, Nov.18.2004, page 3 of 19
元器件交易网
R1LV1616H-I Series
Pin Description (TSOP)
Pin name A0 to A19 A-1 to A19 I/O0 to I/O15 CS1# (CS1) CS2 WE# (WE) OE# (OE) LB# (LB) UB# (UB) BYTE# (BYTE) VCC VSS NC NU*
Features
• Single 3.0 V supply: 2.7 V to 3.6 V • Fast access time: 45/55 ns (max) • Power dissipation: Active: 9 mW/MHz (typ) Standby: 1.5 µW (typ) • Completely static memory. No clock or timing strobe required • Equal access and cycle times • Common data input and output. Three state output • Battery backup operation. 2 chip selection for battery backup • Temperature range: −40 to +85°C • Byte function (×8 mode) available by BYTE# & A-1.
Rev.1.01, Nov.18.2004, page 1 of 19
元器件交易网
R1LV1616H-I Series
Ordering Information