1241.6922.1120000;中文规格书,Datasheet资料

Product manualMiniature – Push button switchesSMS(Surface mount) and PMS(PCB mount). CONTENT1. Product_DescriptionSMS/PMS_Base_moduleHeightVariableSMS/PMS2. Technical data and dimensionsSMS/PMSTechnicaldataDimensions SMS/ PMS Base module/Variable HeightDrilling diagram and Solder pads SMS/PMS Base module /Variable height Circuit Diagram SMS/PMS3. Part_numbersPart numbers SMS/PMS Base module/Variable Height4. PackagingPackaging SMS/PMS Base Module/Variable Height5. Qualification Tests6. ROHS Compliant1 Description1.1 SMS/PMS Base moduleMiniature push button switches with a low height of 4,55 - 4,95 mm for surface mounting (SMS) and PCBmounting (PMS).The SMS has large flat surfaces on the top side as well as on the other sides, which are also parallel to each other. This makes the SMS a perfect switch for automatic mounting.The SMS switch is suitable for the SMD soldering process "IR-Reflow".The switch comes with the SMD-leads "Gullwing and J". With J-leads the switch can be lined up with a spacing of 1/2" in one coordinate direction, and with > 13,5 mm in the other coordinate direction. With Gullwing-leads, the switch can be arranged with a spacing of 1/2" in one coordinate direction, and in the other coordinate direction with > 17,5 mm.A minimum spacing of 1/2" to 15 mm is necessary for the PCB version.Basically, the SMS and PMS come in two basic versions concerning the degree of protection. Available are IP 40 and IP 67. According to the degree of protection the IP 40 version is not proof against fluxing and washing, whereas the IP 67 version is. Consequently, the IP 67 version can be exposed to the specified soldering and cleaning processes.The miniature push button switches feature a very good tactile response with an actuation force of about 2N. SMS and PMS are also available with an elongated actuator. These variants serve as base modules for the SMS/PMS variable height version.1.2 SMS/PMS Variable HeightThe variable height SMS/PMS consists of the SMS/PMS base module with elongated actuator and a slip-on button with eight variable heights.The PMS will be supplied with a mounted button. The button for the SMS has to be ordered separately. After soldering, the button must be put on the base module with elongated actuator.Heights between 8,5 mm and 13,75 mm for the SMS and 8,35 mm and 13,60 mm for the PMS are available. Depending on the base module being used, degree of protection for the variable height SMS/PMS is IP 40 or IP 67.2 Data and dimensional drawings2.1 Technical Data SMS/PMS Base module/Variable HeightElectrical data: IP40IP67 Contact material Gold ; Gold/Silver (1) GoldSwitching voltage max. 30V AC/ 42V DC 30V AC/ 42V DCSwitching current max. 50 mA 50 mARated breaking capacity 12 V/10 mA 12 V/10 mALifetime (at 12V/10mA) >1 x 106cycles >1 x 106cyclesLifetime (at 24V/80mA) - ; >1x105 (1) -Initial contact resistance new (IEC 512-2 mV-method) <50 mOhm <50 mOhmInitial contact resistance after 1 x 106 cycles <150 mOhm <150 mOhmInsulation resistance (IEC 512-2) > 1x 108 Ohm > 1x 108 OhmContact bounce time typ. 0,15 ms typ. 0,15 msIP67 Mechanical data: IP40Actuating force 1,8±0,4 N 2,2±0,4 NActuating travel 0,35±0,1 mm 0,35±0,1 mmMechanical strength (force axial, load 1 min.) max. 100 N max. 100 NLifetime(IEC 512-5. Test 9a. Actuating force 5N) >1x 106 cycles >1x 106Soldering data:SMS PMSIP40/IP67 IP40/IP67Soldering method IR Reflow Wave solderingSoldering heat resistance 245 °C/5sec. 248,5 °C/1sec(1)Recommended IR-Reflow Profile for SMSTolerance for Temperature settings T +0°C (according to JEDEC J-STD-020C, July 2004) Used Solder: Omnix O338 (Sn95.5%/Ag4%/Cu0.5%), Alpha Metals Loetsysteme GmbHRecommended Wave Soldering Profile for PMSWave Soldering Equipment: ERSA EMS 3300 Throughput speed: 1m / minSolder type:Sn100C from Nihon Superior (Balver-Solder) Flux material:AW30 Fa. Otto Adjustments Heating ZonesUpper Zone : 280 °C 300 °CLower Zone:450°C500 °C 560 °COther data:SMS PMS SMS PMSIP40 IP40 IP67 IP67Operating temperature(°C) -40 to 85 -40 to 85 -40 to 85 -40 to 85Storage temperature(°C) -40 to 85 -40 to 85 -40 to 85 -40 to 85Degree of protection (DIN 40050) IP40 IP40 IP67 IP67Cleaning agent proofZestronZestronapplied test agent 3) ZestronZestronFlux proof 1) _______ _______ given givenWash proof 2)______________given given1) Visual inspection of switch chamber after immersion in coliophonium solution flux for 3 seconds.2) Inspection of switch chamber after washing process3) CKW and FCKW free mix made of water soluable GlykoletherMechanical data:SMS/PMS SMS/PMS Component Flammabilityrating IP40IP67Socket UL94 V-0 Thermoplast (PA 4.6) Thermoplast (PA 4.6)(PPS) Actuator UL94 V-0 Thermoplast(PPS) ThermoplastCover plate X12 Cr Ni 17 7 X12 Cr Ni 17 7Sealing membrane UL94 HB ________ VMQ Elongated button UL94 V-2 Thermoplast (PC) Thermoplast(PC)Electrical data(material): SMS/PMSSMS/PMSIP40 IP67 Snap dome X12 CrNi 17 7 gold plated on contact sideContacts CuZn37with Ni/Au coated; with Ag coated (1)with Sn coatedTerminals(leads) CuZn372.2 Dimensions SMS/PMS Base module/variable heightSMS Gullwing Base module SMS J-lead Base module PMS PCB Base moduleSMS Gullwing Variable height SMS J-lead Variable height PMS PCB Variable heightSMS Gullwing and J lead with elongated button PMS PCB with elongated buttonGullwing J-AnschlussTotal height information: See point 3.1, Part numbers SMS und PMS Variable height, SMS elongated button must be ordered separately.2.3 Drilling diagram and Solder pads SMS/PMS Base module/variable height Gullwing lead J-lead2.4 Circuit Diagram SMS/PMS3 Part numbers3.1 Part numbers SMS/PMS Base module/Variable HeightPart-Nr. Base moduleType IP40 IP67 Gullwing lead 1241.1600.XX 1241.1606.XX J-lead 1241.1601.XX 1241.1607.XX Through hole lead 1241.1602 1241.1608Part-Nr. Elongated base moduleType IP40 IP67 Gullwing lead 1241.1612.XX 1241.1618.XX J-lead 1241.1613.XX 1241.1619.XX Through hole lead 1241.1614 1241.1620Ordering example______________ Base module_______________________1241.XXXX.XXIndex 11 loose in boxesIndex 23 Blister tapePart-Nr. Variable height PMSHeight in mm IP 40 IP67 Color8,35 1241.1624.11241.1625.1 Yellow1241.1625.2 Orange 9,10 1241.1624.29,85 1241.1624.31241.1625.3 Red1241.1625.4 Blue 10,60 1241.1624.41241.1625.5 Green 11,35 1241.1624.512,10 1241.1624.61241.1625.6 Grey1241.1625.7 Black 12,85 1241.1624.71241.1625.8 White 13,60 1241.1624.8Part-Nr. Elongated buttons for SMSSwitch height SMS with mountedPart-Nr. Color buttons in mm8,50 0862.8101 Yellow9,25 0862.8102 Orange10,00 0862.8103 Red10,75 0862.8104 Blue11,50 0862.8105 Green12,25 0862.8106 Grey13,00 0862.8107 Black13,75 0862.8108 White4 Packaging4.1 Packaging SMS/PMS Base module/Variable Heightloose in boxes SMS/PMS - Index 11 for SMS 100 pieces tape and reel for SMS base module - Index 23 700 pieces tape and reel for SMS elonged. base module -Index 23 450 pieces5 Qualification Tests6 ROHS Compliant分销商库存信息: SCHURTER 1241.1608。

M I C R O J A C K S98density packaging•Beryllium Copper multi-spring contact maintains retention after multiple insertions•Ideal for mounting transistors,re-sistors,diodes,IC’s and similar miniature components•Custom micro jacks manufactured to your specifications •Other platings available upon request.016 [0.41].083[2.11].055[1.40]L3-FINGER CLOSED ENTRY CONTACT.038[0.96].038[0.96]HEX ..020[0.50].130 [3.3].095 [2.4]L.072[1.9].045[1.14]4-FINGER CLOSED ENTRY CONTACT.056[1.42].049[1.24].041[1.04].063[1.60]4-FINGER CLOSED ENTRY CONTACT.205[5.2].089[2.23].248[6.3]4-FINGER CLOSED ENTRY CONTACT.120[3.1].259[6.6].233[5.9].060[1.52]DIA..014[0.4].077[2.0]DIA..015(.38)-.021(.53)PIN -SOLDER MOUNT.015(.38)-.021(.53)PIN -PRESS FIT.015(.38)-.025(.64)PIN -TAPER-FIT.022(.56)-.032(.81)PIN -SOLDER MOUNT.015(.38)-.025(.64)PIN -SOLDER MOUNT.015(.38)-.025(.64)PIN -SOLDER MOUNT.022(.56)-.034(.86)PIN -PRESS FIT.025(.64)-.037(.94)PIN -PRESS FIT.025(.64)-.037(.94)PIN -SOLDER MOUNT.055[1.39].072[1.83].016 [0.41]4-FINGER CLOSED ENTRY CONTACT.093 [2.36].142[3.6].161[4.1]RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT.NO.CAT.NO.CAT.NO.Length Dia.1411-11431-11420-1.140(3.6).0421411-21431-21420-2.170(4.3)(1.07)RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT.NO.CAT.NO.CAT.NO.Length Dia.1412-11432-11468-1.140(3.6).0401412-21432-21468-2.170(4.3)(1.02)1412-31432-31468-3.282(7.2)RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT.NO.CAT.NO.CAT.NO.Length Dia.1415-11435-11469-1.160(4.1).0551415-21435-21469-2.190(4.8)(1.40)RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.169316941695.063(1.60)RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.141314331470.059(1.50)RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.160316061607.052(1.32).061 [1.55].015[0.38].028[0.71].091 [2.3].086[2.2].170[4.3].200[5.1].070 [1.78]KNURL6-FINGER CLOSEDENTRY CONTACT6-FINGER CLOSED ENTRY CONTACT.057[1.45].077[1.96].083[2.11].025[0.7]L.025(.64)-.037(.94)PIN -SOLDER MOUNTRoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.141614361471.067(1.70)RoHSNON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT.NO.CAT.NO.CAT.NO.Length Dia.1626-11614-11619-1.095(2.4).0621626-21614-21619-2.105(2.7)(1.57)1626-31614-31619-3.155(3.9).045 [1.14].062[1.57].090[2.29]6-FINGER CLOSED ENTRY CONTACT.080 [2.03].083 [2.11].022(.56)-.034(.86)PIN -SOLDER MOUNTRoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.165816591673.065(1.65).128[3.3].168[4.3].040 [1.02].092 [2.34].065 [1.65]L.200[5.1].230[5.9]4-FINGER CLOSED ENTRY CONTACT.125 [3.2].032(.81)-.046(1.17)PIN -SWAGE MOUNTRoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.359035913592.065(1.65)RoHS NON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT.NO.CAT.NO.CAT.NO.Dia.169716981699.063(1.60)RoHSNON-RoHS Mtg.GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT.NO.CAT.NO.CAT.NO.Length Dia.1419-11439-11478-1.062(1.6).0691419-21439-21478-2.094(2.4)(1.75)PLATING OPTIONSCONTACT PLATING BODY SPRING RoHS Gold/Gold Gold Gold Compliant Tin/Tin Tin/Lead Tin/Lead Non-CompliantTin/GoldTin/LeadGoldBody:Brass,ASTM-B16Spring:Beryllium Copper(QQ-C-533).057[1.45]HEX.057[1.45]DIA..200[5.1].020[0.52].078[1.98]DIA.6-FINGER CLOSED ENTRY CONTACT.165[4.2].078[1.98].040[1.02].090[2.29].040[1.02].062[1.57].210[5.3].187[4.7].180[4.6]6-FINGER CLOSED ENTRY CONTACTRoHS Plating:Gold:.000010per MIL-G-45204(RoHS Compliant)Tin/Lead:.000200to.000300per MIL-T-10727,Type 1(Non-RoHS Compliant).038[0.96]3-FINGER CLOSED ENTRY CONTACTL .055[1.40].083[2.11].016[0.41]RoHS Tel (718)956-8900•Fax (718)956-9040(800)221-5510•kec@31-0720th Road –Astoria,NY 11105-2017RoHS COMPLIANT ~ISO 9001CERTIFIED®分销商库存信息:KEYSTONE-ELECTRONICS1435-21431-11431-2 1420-11420-21470 1411-11411-21435-1 1469-11469-21614-3 1468-11468-21607 16951619-31606 169414711699 1415-11415-21413 359116981659 359216031432-1 1432-21432-31673 1468-316581697 1614-214161619-1 1619-216933590 1626-11626-21626-3 1412-11412-21412-3 1439-11439-21478-2 1419-21419-1。

1241001-1 Product DetailsHome | Customer Support | Suppliers | Site Map | Privacy Policy | Browser Support© 2008 Tyco Electronics Corporation All Rights Reserved SearchProducts Documentation Resources My Account Customer Support Home > Products > By Type > Product Feature Selector > Product Details1241001-1Active Miscellaneous TerminalsAlways EU RoHS/ELV Compliant (Statement of Compliance)Product Highlights:?Tubular End Sleeve?Wire Range = 0.75²[18.5] mm [AWG]?Not For Use With Double Wire?Strip Length = 10.00 mm?Color = GrayView all Features | Find SimilarProductsCheck Pricing &AvailabilitySearch for ToolingProduct FeatureSelectorContact Us AboutThis ProductQuick LinksDocumentation & Additional InformationProduct Drawings:?TUBULAR END-SLEEVE WITH PLASTIC SLEEVE, STRIP FORM, ...(PDF, English)Catalog Pages/Data Sheets:?BUCHANAN TERMINAL BLOCKS CATALOG - EUROSTYLETERMINA...(PDF, English)Product Specifications:?None AvailableApplication Specifications:?None AvailableInstruction Sheets:?None AvailableCAD Files: (CAD Format & Compression Information)?2D Drawing (DXF, Version A2)?3D Model (IGES, Version A2)?3D Model (STEP, Version A2)List all Documents Related Products: ?ToolingProduct Features (Please use the Product Drawing for all design activity)Product Type Features:?Product Type = Tubular End Sleeve?Color = Gray?Insulation Diameter (mm [in]) = 2.60 [.102]Body Related Features:?Wire Range (mm [AWG]) = 0.75²[18.5] ?Double Wire = No?Strip Length (mm [in]) = 10.00 [0.394]Contact Related Features:?Bulb = Without Configuration Related Features:?Diode = WithoutIndustry Standards:?RoHS/ELV Compliance = RoHS compliant, ELVcompliant?Lead Free Solder Processes = Not relevant forlead free process?RoHS/ELV Compliance History = Always wasRoHS compliantPackaging Related Features:?Packaging Method = Strip?Packaging Quantity = 1,000Other:?Brand = AMPProvide Website Feedback | Contact Customer Support。

3 ns maximum channel-to-channel matching High common-mode transient immunity: > 25 kV/µs Safety and regulatory approvals
UL recognition 2500 V rms for 1 minute per UL 1577
APPLICATIONS
The ADuM120x isolators provide two independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide). Both parts operate with the supply voltage on either side ranging from 2.7 V to 5.5 V, providing compatibility with lower voltage systems as well as enabling a voltage translation functionality across the isolation barrier. In addition, the ADuM120x provide low pulse-width distortion (< 3 ns for CR grade) and tight channel-to-channel matching (< 3 ns for CR grade). Unlike other optocoupler alternatives, the ADuM120x isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions