直升机市场同类产品价格比较

  • 格式:doc
  • 大小:18.04 MB
  • 文档页数:43

Erdos Haimingbao Helicopter Inverstment Co.,Limited.鄂尔多斯市海明堡直升机制造有限公司(H.M.B.)美国现在直升机市场价格简介目前国际市场上的直升机价格,大致分为以下几大类:●用于管道检查,交通监控,畜牧巡查的机种,价格由5 到30 万美元之间(单座/ 双座机种)。

●用于警察部门与新闻媒体的机种,一般在300 万美元的范围(双座到五座机种)。

医院用途的救护直升机一般价位在500-600 万美元。

●用于一般企业主管的豪华行政专机的机种,一般在1300 万美元的价位(七座到九座机种)。

●特种机种(用于工业,工程运输,救火,重型吊运等)双旋翼双发动机,价格可以高达3500 万美元以上。

中国通用航空市场的起步发展,将会是以此种多功能普及型的直升机为亮点,并占据最大的市场份额与成长空间。

Schweiser 300C – 人民币328万 AGUSTA 119 – 人民币3005万Enstrom 280 – 人民币 376 万西科斯基S-92 :人民币17589万贝尔BELL 412 :7695万ROBINSON R-66 –人民币698万欧洲蜂鸟EC-120 –人民币1485万超级美洲豹- 人民币15585万麦道MD-500E –人民币1091万麦道MD-902 –人民币4420万厂商:Robinson 机型:R-44 裸机基本价:$ 400,890. 美元主旋翼:2 叶尾旋翼:2 叶人民币391 万元。

▪Crew: one or two pilots * 机员:1 或2 人▪Capacity: four, including pilot * 容量:4 人(包括机员)▪Payload: 900 lb (408 kg) * 载重量:900磅(408公斤)▪Length: 21 ft 5 in (9.0 m) * 机身长度:900 公分▪Rotor diameter: 33 ft (10.1 m) * 主旋翼直径:1010 公分▪Tail rotor diameter: 4 ft 10 in (1.5 m) * 尾旋翼直径:150公分▪Height: 10 ft 9 in (3.3 m) * 机身高度:330公分▪Empty weight: 1,450 lb (657.7 kg) * 空机重量:657.7 公斤▪Loaded weight: 2,500 lb (1,134 kg) * 满载重量:1134公斤▪Powerplant: 1×Lycoming IO-540-AE1A5 6 cylinder, flat engine with fuel injection, 245 bhp (183 kW) * 发动机:莱康明IO-540-AE-1A5 六缸平置喷油引擎/ 245马力。

▪Fuel: 100 low lead (100LL) fuel or 100/130. * 100无铅汽油或是100/130 燃油。

▪Main tank capacity: 31.6 US gallons (120 liters) * 主油箱容量:120 公升▪Main tank usable fuel: 30.6 US gallons (116 liters) * 主油箱可用油量:116 公升▪Auxiliary tank capacity: 18.5 US gallons (70 liters) * 副油箱容量:70 公升▪Auxiliary tank usable fuel: 18.3 US gallons (69 liters) * 副油箱可用油量:69 公升Performance▪Maximum speed: 130 kn (240 km/h; 150 mph) * 极速:240公里/ 小时▪Cruise speed: 110 kn (200 km/h; 130 mph) * 巡航速度:200 公里/ 小时▪Range: 300 nmi (560 km; 350 mi) * 航程:560 公里▪Altitude restrictions: 14,000 ft (4,300 m) density altitude or 9,000 ft (2,700 m) above ground level in order to be able to reach ground within 5 minutes in case of fire.▪飞行高度:4300 公尺。

厂商:Bell 机型:206 Jet Ranger 裸机基本价:$ 850,000.3,350 lbs 磅1,519kg 公斤standard max gross weight最大标准毛重standard useful load1,487lbs 674kg最大标准载重Vne(never-exceed speed)最高极速122kn 226km/hengine take-off power 起飞马力420shp 313kWmax range航程374nm 海里694km 公里BELL JET RANGER Room for 4 passengers and 1 pilot.包括机员,最多5人。

Max. range of 374 nautical miles at max.cruise speed, endurance of 4.5 hours atloiter speed。

滞空时间:4.5小时。

.External loads of up to 1,500 lb.,Rolls-Royce 250-C20J engine,rated at 420 SHP, power for speeds to 122kts.BELL 贝尔直升机公司是目前全世界市场份额最大的生产厂商,本公司将计划以最佳的品质与产品性价比来争取该公司的国际市场份额。

P.K. BELL 206VAT 蜂鸟内装整机组件:All Documentation 所有文档图纸Instruction manual, drawings, photographs, illustrated parts manuals, maintenance and flight manuals.说明手册,图纸,图片,零部件手册,保养与飞行手册。

Engine Lycoming VO-435-A1F 莱康明VO-435-A1F 发动机Includes fuel injection, 4130 chrome-molly steel engine mount, elastomeric lord mounts, engine cooling fan, cylinder baffles, cylinder jacket, oil cooler and composite adapter, oil tank and mount, exhaust and silencers, driveshaft, flywheel, clutch and freewheel unit, air filter, electric fuel pump, fuel & oil hoses and fittings, alternator, starter, vibrator, ignition harness, spark plugs and hardware, everything required to install the Lycoming VO-435.包括喷油系统,4130发动机底座,发动机冷却风扇,机油冷却器,油箱,油箱架,排气管,消音器,传动轴,飞轮,空气过滤器,电子油泵,等全套莱康明所有零部件。

Fuel Injection System 电子喷油系统Includes large manifold, purge valve, high pressure fuel pump, high pressure gauge, hoses/fittings, air scoop.包括高压油泵,进气罩,油管等等。

Instrument Kit 仪表板Includes the following gauges; dual tachometer, airspeed, altimeter, manifold pressure, transmission oil pressure, fuel pressure, cylinder head temperature, engine oil pressure, engine oil temperature, fuel quantity, volt/ampmeter.包括转速表,高度表,油压表,温度表,机油温度表,传动油温度表,油箱表,等等。

Lower Cabin/Airframe 下部机身/ 骨架Preformed bulkheads/ribs, pilot drilled skins, castings, and hardware.包括所有已经钻好孔的机身骨架,机身外壳与装配零部件。

Upper Cabin/Airframe 上部机身/ 骨架Preformed ribs/firewall assembled with skins and hardware. Hardpoints and skins preassembled and riveted in place.预先成型的机身骨架,机身外壳,等等。

Landing Gear 起落架Main and nose wheel/brake assemblies, oleo struts front and rear, 4130 chrome-molly steel weld assemblies, all castings and hardware.鼻轮,刹车,避震器,等等。

Nose and Windshield 机头与挡风玻璃Windshield and composite nose chin windows, preformed ribs/bulkheads, instrument panel section, composite doors, and hardware.机首与挡风玻璃,复合材料机门,等等。

Tail Cone机尾Tail cone, 4130 chrome-molly steel tail cone support, castings, stabilizers, and hardware.Tail Rotor 尾旋翼Tail gearbox, Intermediate gearbox, pylon casting and tube, tail blades preassembled to hub painted andbalanced, driveshaft, spline couplings, tail skid, control rods, and hardware.尾旋翼变速箱,中部变速箱,主体,外壳等等。