CHM-TRN-GC-WM220-Stock Placement - 0202-CN

DESCRIPTIONThe SS351AT and SS451A sensors are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to a either a North pole or a South pole.These omnipolar sensors are sensitive and flexible devices designed to meet a wide range of potential applications. The SS351AT and SS451A have a typical operating point of 85 G at 25 °C [77 °F]. Because they can be operated by a North pole or a South pole, they do not require the magnet polarity to be identified, thus making the installation easier and potentially reducing the system cost.These sensors are available in two package styles. The SS351AT is available in the subminiature SOT-23 surface mount package; the SS451A is available in the leaded, flat TO-92-style package. The SS351AT’s small size requires less PC board space, allowing it to be used in smaller assemblies. Its 3 Vdc capability allows for use in low voltage applications, promoting energy efficiency.The SS351AT is available on tape and reel (3000 units per reel); the SS451A is available in a bulk package (1000 unitsper bag).FEATURESSubminiature package size (SS351AT) supplied on tapeand reel allows for a compact design with automated component placement, helping to reduce manufacturing costsSimple activation from a North pole or a South pole andsensitive magnetics make this omnipolar product suitable in a variety of potential motion control, lid closuredetection, and displacement sensing applications Low voltage 3 Vdc capability helps reduce powerconsumptionBuilt-in reverse polarity protection protects the device frompotential damage during installationThermally balanced integrated circuit provides for stableoperation over a wide temperature range of -40° to 150 °C [-40 °F to 302 °F]RoHS-compliant materials meet Directive 2002/95/ECPOTENTIAL APPLICATIONSCommercial:Speed and RPM (revolutions per minute) sensing infitness equipmentMagnetic encoder for building accessDamper or valve position control in HVAC (heating,ventilation and air conditioning) equipmentFlow rate sensing in appliances and water softenersPrinter head position sensing Industrial:Flow rate sensing in industrial processesRobotic control (cylinder position monitoring) Float-based fluid level sensingMedical:Displacement sensor in hospital beds and medicalequipmentMedication bin monitor on portable drug carts2/sensing1in the magnetic characteristics. To test the switch against the specified magnetic characteristics, the switch must be placed in a uniform magnetic field.Honeywell Sensing and Control3Sensing and Control Honeywell1985 Douglas Drive NorthGolden Valley, MN 55422 /sensing 005917-1-EN IL50 GLO Printed in USA November 2009© 2009 Honeywell International Inc. All rights reserved.WARNINGWARRANTY/REMEDYHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.WARNINGMISUSE OF DOCUMENTATIONThe information presented in this product sheet is forreference only. DO NOT USE this document as aproduct installation guide.Complete installation, operation, and maintenanceinformation is provided in the instructions supplied witheach product.Failure to comply with these instructions could result in death or serious injury.SALES AND SERVICEHoneywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:E-mail:*********************Internet: /sensingPhone and Fax:Asia Pacific +65 6355-2828+65 6445-3033 FaxEurope +44 (0) 1698 481481+44 (0) 1698 481676 FaxLatin America +1-305-805-8188+1-305-883-8257 FaxUSA/Canada +1-800-537-6945+1-815-235-6847+1-815-235-6545 Fax。

WALL MOUNTING ASSEMBLYPART NUMBER: SMK-202COXREELSThe technical data and images which appear in this manual are for informational purposes only. NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE CREATED BY THE DESCRIPTIONS AND DEPICTIONS OF THE PRODUCTS SHOWN IN THIS MANUAL. COXREELS makes no warranty (and assumes no liability) as to function of equipment or operation of systems built according to customer design or of the ability of any of its products to interface, operate or function with any portions of customer systems not provided by COXREELS.COXREELS agrees to repair or exchange the goods sold hereunder necessitated by reason of defective workmanship and material discovered and reported to COXREELS within two years after original invoice date.Except where the nature of the defect is such that it is appropriate, in COXREELS’ judgment, to effect repairs on site, COXREELS’ obligation hereunder to remedy defects shall be limited to repairing or replacing (at COXREELS’ option) FOB COXREELS Factory, any part returned to COXREELS at the risk and cost of Buyer. Defective parts replaced shall become the property of COXREELS.COXREELS shall only be obligated to make such repair or replacement if the goods have been used by Buyer only in service recommended. COXREELS is not responsible for defects which arise from improper installation, neglect, improper use of or from normal wear and tear.COXREELS obligation shall be limited by the manufacturer’s warranty (and is not further warranted by COXREELS) for all parts procured from others according to published data, specifications or performance information not designed by COXREELS.COXREELS further agrees to replace or at COXREELS’ option to provide a refund of the sales price of any goods that do not conform to applicable specifications or which differ from that agreed to be supplied which non-conformity is discovered and forthwith reported to COXREELS within 30 days after shipment to the Buyer. COXREELS’ obligation to replace or refund the purchase price for non-conforming goods shall arise once the Buyer returns such goods FOB COXREELS Factory at the risk and cost of Buyer. Goods replaced by COXREELS shall become property of COXREELS.COXREELS liability on any claim, whether in contract, tort (including negligence), or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery, resale, repair, replacement or use of any products or services shall in no case exceed the price paid for the product or services or any part thereof which give rise to the claim. In no event shall COXREELS be liable for consequential, special, incidental or other damages, nor shall COXREELS be liable in respect of personal injury or damage to property not the subject matter hereof unless attributable to gross misconduct of COXREELS, which shall mean an act or omission by COXREELS demonstrating reckless disregard of the foreseeable consequences thereof.COXREELS is not responsible for incorrect choice of models or where products are used in excess of their rated and recommended capacities and design functions or under abnormal conditions. COXREELS assumes no liability for loss of time, damage or injuries to property or persons resulting from the use of COXREELS products. Buyer shallhold COXREELS harmless from all liability, claims, suits and expenses in connection with loss or damage resulting from operation of products or utilization of services, respectively, of COXREELS and shall defend any suit or action which might arise there from in Buyer’s name – provided that COXREELS shall have the right to elect to defend any such suit or action for the account of Buyer. The foregoing shall be the exclusive remedies of the Buyer and all persons and entitles claiming through the Buyer.WARNING – APPLICATIONTHE PRODUCTS IN THIS INSTALLATION AND MAINTENANCE MANUAL HAVE BEEN TESTED UNDER CONTROLLED LABORATORY CONDITIONS TOMEET SPECIFIC TEST CRITERIA. THESE TESTS ARE NOT INTENDED TO REFLECT THE PERFORMANCE OF THE PRODUCTS OR ANY OTHERMATERIAL IN ANY SPECIFIC APPLICATION, BUT ARE INTENDED TO PROVIDE THE USER WITH APPLICATION GUIDELINES. THE PRODUCTS ARE INTENDED FOR USE BY KNOWLEDGEABLE PERSONS HAVING THE TECHNICAL SKILL NECESSARY TO EVALUATE THEIR SUITABILITY FORSPECIFIC APPLICATIONS.WARNING – USER RESPONSIBILITYTHE USER, THROUGH ITS OWN ANALYSIS AND TESTING, IS SOLELY RESPONSIBLE FOR MAKING THE FINAL SELECTION OF THE SYSTEM ANDCOMPONENTS AND ASSURING THAT ALL PERFORMANCE, ENDURANCE, MAINTENANCE, SAFETY AND WARNING REQUIREMENTS OF THEAPPLICATION ARE MET.TO THE EXTENT THAT COXREELS PROVIDE COMPONENT OR SYSTEM OPTIONS BASED UPON DATA OR SPECIFICATIONS PROVIDED BY THE USER,THE USER IS RESPONSIBLE FOR DETERMINING THAT SUCH DATA AND SPECIFICATIONS ARE SUITABLE AND SUFFICIENT FOR ALLAPPLICATIONS AND REASONABLY FORESEEABLE USES OF THE COMPONENTS OR SYSTEM.WARNING – SAFETYREAD ALL SAFETY INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE, OR MAINTAIN THIS PRODUCT. ONLY QUALIFIEDPERSONNEL SHOULD UNDERTAKE THE INSTALLATION AND COMMISSIONING OF THIS PRODUCT. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.FAILURE TO FOLLOW RECOMMENDED APPLICATION INFORMATION AND RECOMMENDED PROCEDURES FOR SELECTION, INSTALLATION, CARE,MAINTENANCE AND STORAGE OF REEL ASSEMBLY, SWIVEL, HOSE, COUPLINGS OR HOSE ASSEMBLIES MAY RESULT IN FAILURE TO PERFORM PROPERLY AND MAY RESULT IN DAMAGE TO PROPERTY AND SERIOUS BODILY INJURY.FOLLOW GOOD MAINTENANCE PRACTICES – ESTABLISH A PROGRAM OF INSPECTION, TESTING AND REPLACEMENT OF REEL COMPONENTS,ACCESSORIES AND OR BRACKETS FROM FACTORS INCLUDING:o SEVERITY OF APPLICATIONo FREQUENCY OF EQUIPMENT USEo PAST PERFORMANCE OF REEL COMPONENTSONLY PROPERLY TRAINED PERSONS SHOULD INSPECT, TEST OR SERVICE REEL AND HOSE/CABLE ASSEMBLIES. PERIODIC UPDATING OFTRAINING IS RECOMMENDED.DOCUMENT MAINTENANCE, INSPECTIONS AND TESTING.PRESSURE WARNINGS•This equipment should be properly installed before use in accordance with local codes and ordinances. •The pressure to and from the hose reel should be released and disconnected from the hose reel before any service functions are performed. •This hose reel must not be used for pressure greater that the rating listed in the COXREELS catalog / website .OPERATIONAL WARNINGS•Exercise care when handling the hose reel during normal operation. Some hose reels have a rotating drum powered by a spring under tension or chain, sprocket and gears. •Do not use hose different from that for which the reel is intended. Changes in diameter, weight per foot, length of hose or flexibility (Minimum Bend Radius) will affect the operation of the reel. •Mounting hardware and fasteners should be installed to maintain tightness under vibration and checked periodically to ensure tightness. •Overhead installation mountings should be such that the reel is not supported by bolts in tension. A safety chain, cable, enclosure or netting is strongly recommended to minimize damage and/or possible injury in the event of a mounting failure.SAFETYMAINTENANCE WARNINGS•Modification of the equipment may cause excessive wear and will void the warranty. Contact COXREELS regarding changes or modifications of equipment which could affect reliability or safety.•DO NOT DISASSEMBLE A SPRING MOTOR FOR ANY REASON! Serious personal injury could result.Some hose reels are equipped with a spring under tension. Contact COXREELS for assistance.800-COX-REELTool Free Fax: 800-229-REELEmail:*****************SPECIFICATIONS & LISTINGS•The identified Series of Hose Reel products within this manual are not certified or listed by any independent certifying or regulatory body.•This series of hose reels is intended for industrial use and are provided with permanent mounting means, with the exception of the portable reel models.PRESSURE & TEMPERATURE RATING•All reels covered in this manual with or without hose have specific P.S.I. ratings. (Please refer to the COXREELS catalog, website or contact Customer Service for reel specific data). Reels should not be used at pressures greater that the rating of the hose, swivel, plumbing or overall reel rating.•Multipurpose hose is installed with tube compounded for maximum oil resistance. Hose can be used for air, water, oil and many other chemical applications. •Operational temperature ranges vary across the wide range of hose options. (Please refer to the COXREELS catalog, website or contact Customer Service for hose specific data). Hose reels should not be used at temperatures below or above the rating of the hose.•The operational rating of a reel not equipped with hose is determined by the capacity of the installed hose. The pressure rating of the reel without hose must not be greater than the than the operational capacity of a reel. (Please refer to the COXREELS catalog, website or contact Customer Service for reel/hose specific data). Variations in the OD of higher rated hose will affect the operational capacity of the reel.LABELS & MARKINGSHose Reels with and without hose•The marking of the hose reel provided with or without hose includes the followingo The label on the frame includes the COXREELS name and Logo, the product catalog number, the individual product serial number, PSI rating and what type and length of hose intended for use on the reel.o The maximum pressure rating for every hose reel supplied without hose is marked on the COXREELS Identification Label. In absence of this information, refer to website, catalog, or customer service. Actual rating is determined by the installed hose and is not to exceed the indicatedmaximum operational rating. The pressure rating of the hose installed on reels provided without hose must be marked on the label upon installation.PERSONAL SAFETY•Ensure reel has been properly installed before connecting supply line.•Before connecting to reel, be certain supply line does not exceed rated pressure of the hose reel or voltage / amperage rating on cable reel.•Thoroughly review the “Hose Installation” instructions to properly install hose.•Perform “Operational Check” per instructions to ensure reel is operating properly.•If a leak should occur after applying pressure to the reel, immediately turn off pressure source and discontinue supply line pressure.WARNING: Prevent static sparking. When working around flammables, ensure that the hose reel, hose, and equipment are properly grounded.INSTALLATIONWARNING: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE, OR MAINTAIN THIS PRODUCT. ONLY QUALIFIED PERSONNEL SHOULD UNDERTAKE THE INSTALLATION AND COMMISSIONING OF THIS PRODUCT. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.WALL MOUNT ASSEMBLY:Item Description1 SMK-2022 HexNut3 HexBolt4 ReelAssembly5 WallMountingBoltsINSTALLATION / MOUNTING:•Position the wall mounting bracket on a wall or other stable platform, at the desired location, and secure with bolts.•Orient the reel assembly so that the hose roller is in the desired position.•While keeping the reel assembly steady, slide the hex bolts through the reel assembly and through the wall mounting bracket as shown in Figure 1.•Hand tighten hex nuts onto hex bolts.•Tighten all nuts using wrench.FIGURE 1。

1Eaton Electric Limited,Great Marlings, Butterfield, Luton Beds, LU2 8DL, UK.Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283E-mail:********************© 2023 EatonAll Rights ReservedPublication No. EPS MTL GECMA TC Rev 3 210223February 2023As part of the MTL GECMA Work Station (WS) range, the MTL GECMA Thin Client (TC) is an operating terminal designed to enhance visualization within your process using high definition display options of 19”, 22” or 24”. They can be specified for use as a Thin Client within the strictest of hygienic conditions, aggressive indoor and outdoor production environments and in Ex areas typically found in pharmaceutical, chemical, petro chemical, oil & gas and off-shore manufacturing.This latest generation of MTL GECMA Thin Clients from Eaton supports EX e copper based and Ex op fibre network communications over significantly longer distances if required and allows data communication between the Terminal and the Server through the Local Area Network via copper or fibre optic cable. The dual ethernet gigabit port allows for redundant high speed and high bandwidth data transmission. The quad core CPU with 2GHz frequency ensures that even complex applications run smoothly and can be localized if necessary.MTL GECMA TC displays are of the highest industrial quality. To ensure the best readability, the terminal incorporates optical bonding and LED-backlit technology resulting in a high resolution image in a low power display.MTL GECMA TCThin Client for hazardous areas -zone 1/2 (gas)The MTL GECMA TC has been designed to conform to a wide range of international Ex-approvals. International companies can operate using the same system, setup and interfaces worldwide, increasing overall safety, reliability and highest dependability across their business, whilst offering easy installation, individual design and consistency with a ‘state-of-the-art’ solution.Its slim, flexible modular construction can be used in even theharshest environments and allows the MTL GECMA TC to be specified to meet your plant’s requirements with the added benefit of a quality product. This not only shortens delivery time considerably but withmaintenance now possible by changing modules even on site, increases your plants safety and significantly reduces downtime.MTL GECMA TC is also available with a large range of specialised housing options, the modular design concept enables you to benefit from a cost effective, tailored and customised solution for your application installation.The multiple interfaces future-proof your investment and allow easy expansion for additional connected devices, such as scanners or card readers.Existing MTL GECMA remote operating systems can be upgraded quickly and easily without installing new cables, resulting in state-of-the-art visualisation technology utilising existing cables (applicable tocopper versions only).**Contact us for more details• Platform, modular design concept • Lightweight, slimline design• Specified for use in hazardous areas with Ex approvals • Display options 19”, 22” or 24”, in different resolutions • Fibre optic or copper Ethernet network connection • Designed for maximum performance and reliability in harsh environments• Dual ethernet ports for redundant data connectivitySPECIFICATIONELECTRICALMECHANICALENVIRONMENTALCERTIFICATIONFor the latest certification information visit /certificates 2The given data is only intended as a productdescription and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.Eaton Electric Limited,Great Marlings, Butterfield, Luton Beds, LU2 8DL, UK.Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283E-mail:********************© 2023 EatonAll Rights ReservedPublication No. EPS MTL GECMA TC Rev 3 210222February 2023EUROPE (EMEA): +44 (0)1582 723633 ********************THE AMERICAS: +1 800 835 7075*********************ASIA-PACIFIC:+65 6645 9864 / 9865***********************318-36 100-230 8-36 V DC //00-230 V ACThin ClientOPERATING PRINCIPLEMODULE OVERVIEWFurther enclosure options on request*Please contact your local sales office for these optionsENCLOSURE OPTIONSWall mounting*Floor mounting (standard)Ceilingmounting*。

04445322A-07Manual source changeoverInverseur manuel monoblocTransfer PacTFXM100-250Schneider Electric Industries SAS35 rue Joseph MonierCS 30323F - 92506 Rueil Malmaison Cedex© 2022 Schneider Electric.All rights reserved.Printed on recycled paper.TENGA EN CUENTAp La instalación, manejo, puesta en servicio ymantenimiento de equipos eléctricos deberánser realizados sólo por personal cualificado.p Schneider Electric no se hace responsablede ninguna de las consecuencias del uso deeste material.REMARQUE IMPORTANTEp L’installation, l’utilisation, la réparation et lamaintenance des équipements électriquesdoivent être assurés uniquement par dupersonnel qualifié.p Schneider Electric décline touteresponsabilité quant aux conséquences del’utilisation de ce matériel.PLEASE NOTEp Electrical equipment should be installed,operated, serviced, and maintained only byqualified personnel.p No responsibility is assumed by SchneiderElectric for any consequences arising out ofthe use of this material.04445322A-07Transfer PacTFXM320-630Manual source changeoverInverseur manuel monoblocSchneider Electric Industries SAS35 rue Joseph MonierCS 30323F - 92506 Rueil Malmaison Cedex© 2022 Schneider Electric.All rights reserved.Printed on recycled paper.TENGA EN CUENTAp La instalación, manejo, puesta en servicio ymantenimiento de equipos eléctricos deberánser realizados sólo por personal cualificado.p Schneider Electric no se hace responsablede ninguna de las consecuencias del uso deeste material.REMARQUE IMPORTANTEp L’installation, l’utilisation, la réparation et lamaintenance des équipements électriquesdoivent être assurés uniquement par dupersonnel qualifié.p Schneider Electric décline touteresponsabilité quant aux conséquences del’utilisation de ce matériel.PLEASE NOTEp Electrical equipment should be installed,operated, serviced, and maintained only byqualified personnel.p No responsibility is assumed by SchneiderElectric for any consequences arising out ofthe use of this material.。