ET200S手册

Hardware configuration Rack ● Quantity of operable ET 200SP modules, max. ● Quantity of operable ET 200AL modules, max.
Interfaces Number of PROFIBUS interfaces
Yes Yes Yes
Yes; green LED Yes; red LED Yes; Yellow LED Yes; green PWR LED Yes; green DP LED
No Yes No
Safety extra low voltage SELV
707 V DC (type test)
-25 °C 60 °C -25 °C 50 °C
Yes
24 V 19.2 V 28.8 V Yes
10 ms
335 mA 1.6 A 0.038 A²·s
1.5 W
32 byte; per input / output 244 byte; per input / output
32 16
1
8/3/2022
Subject to change without notice © Copyright Siemens
Isolation Isolation tested with
Ambient conditions Ambient temperature during operation ● horizontal installation, min. ● horizontal installation, max. ● vertical installation, min. ● vertical installation, max. Altitude during operation relating to sea level ● Installation altitude above sea level, max.

General information Product type designation Firmware version ● FW update possible usable BaseUnits Color code for module-specific color identification plate Product function ● I&M data ● Isochronous mode Engineering with ● STEP 7 TIA Portal configurable/integrated from version ● STEP 7 configurable/integrated from version ● PROFIBUS from GSD version/GSD revision ● PROFINET from GSD version/GSD revision
5/9/2023
Subject to change without notice © Copyright Siemens
Automatic encoding ● Mechanical coding element ● Type of mechanical coding element
Digital inputs Number of digital inputs Digital inputs, parameterizable Input characteristic curve in accordance with IEC 61131, type 3 Digital input functions, parameterizable ● Gate start/stop ● Capture ● Synchronization ● Freely usable digital input Input voltage ● Rated value (DC) ● for signal "0" ● for signal "1" ● permissible voltage at input, min. ● permissible voltage at input, max. Input current ● for signal "1", typ. Input delay (for rated value of input voltage) for standard inputs — parameterizable — at "0" to "1", min. — at "1" to "0", min. for technological functions — parameterizable Cable length ● shielded, max. ● unshielded, max.

共享设备（Shared Device）功能允许两个控制器访问同一个 PROFINET IO设备。由于可以减少远程设备安装，从而工程 开发，接线和安装成本可以降低。模块可以灵活的分配给两 个CPU中一个。
IO-Controller 1 IO-Controller 2
PROFINET Industrial Ethernet
IEC 61158
IEC 1131
IEC 1131, Part 2
UL
Acc. to UL508 standard, File No.
E 116536/E 75310 (AC modules)
CSA
Acc. to standard C22.2 No. 142.
File No. LR 48323/LR 44226
ISA
ISA-S71.04
Severity Level G1, G2, G3
( ET 200SP,ET 200S, ET 200M,
ET 200iSP)
Safety
IEC 62061 up to SIL3,
EN ISO 13849-1 up to PLe, as well as
EN 954-1 up to Cat. 4
●
Zones 2， 22 0ºC ...+60ºC 可达5 g 1)
●
Zones 2， 22 0ºC ... +60ºC 2g
●
Zones 2， 22 0ºC ... +60ºC 1g
●
Zones 2， 22 0ºC ... +60ºC 2g
● ● ●
● ● ● ● ●
通道级
●
●
●
●
CANopen， DeviceNet， Ethernet/IP

Ambient conditions Ambient temperature during operation ● horizontal installation, min. ● horizontal installation, max. ● vertical installation, min. ● vertical installation, max. Altitude during operation relating to sea level
2/1ange without notice © Copyright Siemens
● Installation altitude above sea level, max. connection method / header
Terminals ● Terminal type ● system-integrated shield connection ● Conductor cross-section, min. ● Conductor cross-section, max. ● Number of process terminals to I/O module ● Number of terminals to AUX bus ● Number of add-on terminals ● Number of terminals with connection to P1 and P2 bus
Dimensions Width Height Depth
Weights Weight, approx.
last modified:
3 000 m
Push-in terminal Yes; Optional 0.14 mm²; 0.2 mm² without wire end ferrule 2.5 mm²; 1.5 mm² with wire end ferrule 16 0 0 2