BL8505-302RM中文资料

1
I
1
/99)’
CUSTOMER’S
APPROVAL
DATE: BY:
元器件交易网
x996029 MODEL No. Junl16l99 PAGE
GL5ZS302BOS
l/10
GL5ZS302BOS
Snecifkation
1. Application This specificationappliesto the light emitting diode deviceModel No. GL5ZS302BOS. [AlGaInF (dicing or scribebake type) Sunset-orange LED device]
元器件交易网
PREPARED BY: Lvl -7’- . tieda APPROVED BY: Jk 3-F “LAS DATE: -WI DATE: / ,t/97 ELECTRONIC COMPONENTS GROUP SHARP CORPOFNI’ION ::: REPRESENTATIVE SPECNo. DC396029 J&16/99 10 Pages DIVISION:
SPlkIFICATION
DEVICE SPECIFICATION FOR
Opto-Electronic Devices Division
Light Emitting Diode
MODEL No.
GL5ZS302BOS
1. These specification sheets include materials protected under the copyright of Sharp Corporation (“Sharp”). Please do not reproduce or cause anyone to reproduce them without Sharp’s consent. 2. When using this product, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets, as well as the precautions mentioned below. Sharp assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets, and the precautions mentioned below. (Precautions) (1) This products is designed for use in the following application areas: * OA equipment * Audio visual equipment * Home appliance * Measuring equipment * Telecommunication equipment (Terminal) * Tooling machines * Computers r If the use of the product in the above application areas is for equipment listed in paragraphs (2) or (3). please be sure to observe the precautions given in those respective paragraphs. (2) Appropriate measures, such as fail-safe design and redundant design considering the safety design of the overall system and equipment, should be taken to ensure reliability and safety when this product is used for equipment which demands high reliability and safety in function and precision, such as ; * Transportation control and safety equipment (aircraft, train, automobile etc.) * Gas leakage sensor breakers * Rescue and security equipment * Traffic signals * Other safety equipment [ (3) Please do not use this product for equipment which require extremely high reliability and safety in function and precision, such as ; * Space equipment * Telecommunication equipment (for trunk lines) * Medical equipment i * Nuclear power control equipment (4) Please contact and consult with a Sharp sales representative if there are any questions regarding interpretation of the above three paragraphs. 3. Please contact and consult with a Sharp sales representative for any questions about this product. &,i //c$ DATE: PRESENTED BY: 9-i , ./kzzzq2 M.Katoh, Department General Manager of Engineering Dept.m Opto-Electronic Devices Division Electronic Components Group SHARP CORPORATION

121简体中文B85 Anniversary1.2 规格平台•ATX 规格尺寸•固态电容器设计•高密度防潮纤维电路板CPU•支持新款第 4 代和第 4 代 Intel® Core TM i7/i5/i3/Xeon®/Pentium®/Celeron® 处理器 (Socket 1150)•高性能数字供电•4CPU供电设计•支持 Intel® Turbo Boost 2.0 技术芯片集•Intel® B85内存•双通道 DDR3 内存技术•4 x DDR3 DIMM槽•支持 DDR3 1600/1333/1066 非 ECC，非缓冲内存•支持系统内存容量： 32GB（见“注意”）•支持 Intel® Extreme Memory Proile (XMP)1.3/1.2扩充槽• 1 x PCI Express 3.0 x16插槽（PCIE2：x16 模式)•5 x PCI Express 2.0 x1槽图形•只有 GPU 集成的处理器才支持 Intel® HD Graphics 内置视效和 VGA 输出。

•支持 Intel® HD Graphics 内置视效: Intel® 快速同步视频，采用 AVC、MVC (S3D) 和 MPEG-2 Full HW Encode1、Intel®InTru TM 3D、Intel® Clear Video HD 技术、Intel® Insider TM、Intel® HD Graphics 4400/4600•Pixel Shader 5.0、DirectX 11.1•最大共享内存 1792MB•3个图形输出选项： D-Sub、DVI-D 和 HDMI•支持三台显示器•支持HDMI，最大分辨率可达1920x1200 @ 60Hz•支持 DVI-D，60Hz 时最大分辨率达 1920x1200•支持 D-Sub，60Hz 时最大分辨率达 1920x1200122B85 AnniversaryLip Sync、Deep Color (12bpc), xvYCC和HBR（高位速率音频）•通过DVI-D和HDMI端口支持HDCP•通过DVI-D和HDMI端口支持全高清1080p Blu-ray (BD)播放音频• 5.1 CH 高清音频（Realtek ALC662 音频编解码器）•支持防突波(华擎全防护)•ELNA专业音效电容LAN•PCIE x1 千兆网卡 10/100/1000 Mb/s•Realtek RTL8111GR•支持远端開机功能 (Wake-On-W AN)•支持网络唤醒功能 (Wake-On-LAN)•支持防雷击/防 ESD 静电(华擎全防护)•支持网线侦测•支持 Energy Eicient Ethernet 802.3az•支持 PXE•支持网众、网维大师、锐起、易游无盘软件后面板 I/O•1 x PS/2 鼠标接口•1 x PS/2 键盘接口•1 x D-Sub 接口•1 x DVI-D 接口•1 x HDMI 接口•4 x USB 2.0 接口 (支持防 ESD 静电(华擎全防护))•2 x USB 3.0 接口 (支持防 ESD 静电(华擎全防护))•1 x RJ-45 网卡接口 LED 指示灯 (ACT/LINK LED 和 SPEEDLED)•HD 音频插孔: 线性输入 / 前置喇叭 / 麦克风存储•4 x SATA3 6.0 Gb/s 接口，支持 NCQ、AHCI 和热插拔•2 x SATA2 3.0 Gb/s 接口，支持 NCQ、AHCI 和热插拔123接口• 1 x TPM接脚•1 x 电源LED接头•2 x CPU风扇接口（1 x 4针, 1 x 3针）•2 x 机箱风扇接口(1 x 4针, 1 x 3针)•1 x 电源风扇接口（3针）•1 x 24针ATX电源接口•1 x 8针12V电源接口•1 x PCIe电源接口•1 x 前面板音频接口•1 x SPDIF 输出接口•2 x USB 2.0接脚（支持4个USB 2.0端口，支持防ESD静电(华擎全防护)）•1 x USB 3.0接脚（支持2个USB 3.0端口，支持防ESD静电(华擎全防护)）BIOS功能特点•32Mb AMI UEFI Legal BIOS，支持多语言GUI •ACPI 1.1兼容唤醒事件•SMBIOS 2.3.1支持•CPU、DRAM, PCH 1.05V电压多次调整硬件监控•CPU/机箱温度感测（除CHA_FAN2）•CPU/机箱/电源风扇转速计•CPU/机箱静音风扇（根据CPU温度自动调整机箱风扇速度）（除CHA_FAN2）•CPU/机箱风扇多种速度控制（除CHA_FAN2）•电压监控： +12V、+5V、+3.3V、CPU Vcore操作系统•Microsot® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-bit/ 7 32-bit / 7 64-bit认证•FCC、CE、WHQL•ErP/EuP支持（需要支持ErP/EuP的电源）* 有关详细产品信息，请访问我们的网站： 124B85 Anniversary须认识到超频会有一定风险，包括调整 BIOS 设置，应用“自由超频技术”，或使用第三方超频工具。

元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx6G-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K00.45 0.018 0.55 0.022Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.5 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A00.85 0.033 0.95 0.037Compartment Width B0 1.70 0.067 1.80 0.071元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx6A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K00.65 0.026 0.75 0.030Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A00.85 0.033 0.95 0.037Compartment Width B0 1.70 0.067 1.80 0.071元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx6D-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K00.94 0.037 1.14 0.045Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A00.98 0.039 1.18 0.046Compartment Width B0 1.78 0.070 1.98 0.078TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx5A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.20 0.047 1.40 0.055Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.32 0.052 1.52 0.060Compartment Width B0 2.16 0.085 2.36 0.093TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx3-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.17 0.046 1.37 0.054Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.78 0.070 1.98 0.078Compartment Width B0 3.40 0.134 3.60 0.142元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx3A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K0 1.36 0.054 1.56 0.061Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A0 1.88 0.074 2.08 0.082Compartment Width B0 3.37 0.133 3.57 0.141l DEVICE NUMBER: BL-Hxxx4E-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.17 0.046 1.37 0.054Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.00 0.039 1.20 0.047Compartment Width B0 2.15 0.085 2.35 0.093l DEVICE NUMBER: BL-Hxxx4A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.63 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.20 0.045 1.40 0.055Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 16.00 0.629 18.40 0.724 Compartment Length A0 2.20 0.087 2.40 0.094Compartment Width B0 3.20 0.126 3.40 0.134元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx4C-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K0 1.12 0.044 1.32 0.052Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A0 1.78 0.070 1.98 0.078Compartment Width B0 3.33 0.131 3.53 0.139元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxx6H-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATION元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxx3B-TRB¡A BL-Hxxxxxxx3F-TRB¡A BL-Hxxxxxxx3T-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATION元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxx4B-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimum Maximummm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K0 1.20 0.047 1.40 0.055Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 16.00 0.629 18.40 0.724Compartment Length A0 2.20 0.087 2.40 0.094Compartment Width B0 3.20 0.126 3.40 0.134元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxxxx6T-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimum Maximummm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K00.60 0.022 0.80 0.031Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.63 0.064 1.83 0.072Compartment Width B0 1.65 0.065 1.85 0.073l DEVICE NUMBER: BL-Xxx61-TR7l FEATURES:Ÿ Compatible with automatic placement equipment Ÿ Surface Mount assembly lampŸ High efficiency low power consumption Ÿ Long life solid state reliability l TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONMinimumMaximum ITEMSYMBOLmminch mm inch Tape Feed Hole Diameter (DIA)D 0 1.40 0.055 1.55 0.061 Feed Hole LocationE 1.65 0.065 1.85 0.072 Centers Line Dimensions Length DirectionF 5.45 0.215 5.55 0.218 Compartment Depth K 0 3.10 0.122 3.30 0.130 Carrier Tape Overall ThicknessK ¢w ¢w 2.40 0.094 Compartment Pitch P 3.90 0.153 4.10 0.161 Sprocket Hole DiameterP 0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length DirectionP 2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w ¢w 0.30 0.012 Carrier Tape Width W 12.00 0.472 12.30 0.484 Flange Diameter A 178.0 7.008 180.0 7.087 Hub Spindle Hole C 12.50 0.492 13.50 0.531 Hub Diameter D 2 20.00 0.788 21.50 0.846 Fixing Tape Width W 1 9.00 0.354 9.30 0.366 Flange Space Between FlangesT 16.00 0.629 18.40 0.724 Compartment Length A 0 2.20 0.087 2.40 0.094 Compartment WidthB 03.900.1544.100.161元器件交易网元器件交易网TAPE AND REEL AXIAL LED LAMPS WITH “YOKE” LEAD l DEVICE NUMBER: BL-Xxx61-TR8l FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimum Maximummm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.55 0.061Feed Hole Location E 1.65 0.065 1.85 0.072 Centers Line Dimensions Length Direction F 5.45 0.215 5.55 0.218Compartment Depth K0 3.02 0.119 3.22 0.127Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 12.00 0.472 12.30 0.484Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D220.00 0.788 21.50 0.846Fixing Tape Width W19.00 0.354 9.30 0.366 Flange Space Between Flanges T 16.00 0.629 18.40 0.724Compartment Length A0 2.29 0.090 2.49 0.098Compartment Width B07.62 0.300 7.82 0.308元器件交易网TAPE AND REEL AXIAL LED LAMPS WITH “Z” BENT LEAD l DEVICE NUMBER: BL-Xxx61-TR9l FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATION。

元器件交易网
BL8532
White LED PFM Step-Up DC-DC Converter Outline: Features:
Applications
Selection guide BL8532 XX X XX
Pin configuration
Package
Description

- 11Total 13 Pages
8/8/2006
元器件交易网
BL8532
Package description:

- 12Total 13 Pages
8/8/2006
元器件交易网
BL8532-20PSN Ripple Voltage VS. Input Voltage(Iout=100mA)
BL8532-20PSN Ripple Voltage VS. Input Voltage(Iout=200mA)
Input Voltage (V)
BL8532-20PSN Ripple Voltage VS. Input Voltage(Iout=300mA)
Iout
V IFB
Iout
R1 R2
Vout 1 VIFB
Selection of the external components:

- 5Total 13 Pages
8/8/2006
元器件交易网
BL8532
D
1 Inductor Selection
- 6Total 13 Pages
8/8/2006
元器件交易网
BL8532
Im ax RESR Vout
r' r
3
Diode Selection