英文文献原文及翻译

外文文献原稿和译文原稿Sodium Polyacrylate:Also known as super-absorbent or “SAP”(super absorbent polymer), Kimberly Clark used to call it SAM (super absorbent material). It is typically used in fine granular form (like table salt). It helps improve capacity for better retention in a disposable diaper, allowing the product to be thinner with improved performance and less usage of pine fluff pulp. The molecular structure of the polyacrylate has sodium carboxylate groups hanging off the main chain. When it comes in contact with water, the sodium detaches itself, leaving only carboxylions. Being negatively charged, these ions repel one another so that the polymer also has cross-links, which effectively leads to a three-dimensional structure. It has hige molecular weight of more than a million; thus, instead of getting dissolved, it solidifies into a gel. The Hydrogen in the water (H-O-H) is trapped by the acrylate due to the atomic bonds associated with the polarity forces between the atoms. Electrolytes in the liquid, such as salt minerals (urine contains 0.9% of minerals), reduce polarity, thereby affecting superabsorbent properties, especially with regard to the superabsorbent capacity for liquid retention. This is the main reason why diapers containing SAP should never be tested with plain water. Linear molecular configurations have less total capacity than non-linear molecules but, on the other hand, retention of liquid in a linear molecule is higher than in a non-linear molecule, due to improved polarity. For a list of SAP suppliers, please use this link: SAP, the superabsorbent can be designed to absorb higher amounts of liquids (with less retention) or very high retentions (but lower capacity). In addition, a surface cross linker can be added to the superabsorbent particle to help it move liquids while it is saturated. This helps avoid formation of "gel blocks", the phenomenon that describes the impossibility of moving liquids once a SAP particle gets saturated.History of Super Absorbent Polymer ChemistryUn til the 1980’s, water absorbing materials were cellulosic or fiber-based products. Choices were tissue paper, cotton, sponge, and fluff pulp. The water retention capacity of these types of materials is only 20 times their weight – at most.In the early 1960s, the United States Department of Agriculture (USDA) was conducting work on materials to improve water conservation in soils. They developed a resin based on the grafting of acrylonitrile polymer onto the backbone of starch molecules (i.e. starch-grafting). The hydrolyzed product of the hydrolysis of this starch-acrylonitrile co-polymer gave water absorption greater than 400 times its weight. Also, the gel did not release liquid water the way that fiber-based absorbents do.The polymer came to be known as “Super Slurper”.The USDA gave the technical know how several USA companies for further development of the basic technology. A wide range of grating combinations were attempted including work with acrylic acid, acrylamide and polyvinyl alcohol (PVA).Since Japanese companies were excluded by the USDA, they started independent research using starch, carboxy methyl cellulose (CMC), acrylic acid, polyvinyl alcohol (PVA) and isobutylene maleic anhydride (IMA).Early global participants in the development of super absorbent chemistry included Dow Chemical, Hercules, General Mills Chemical, DuPont, National Starch & Chemical, Enka (Akzo), Sanyo Chemical, Sumitomo Chemical, Kao, Nihon Starch and Japan Exlan.In the early 1970s, super absorbent polymer was used commercially for the first time –not for soil amendment applications as originally intended –but for disposable hygienic products. The first product markets were feminine sanitary napkins and adult incontinence products.In 1978, Park Davis (d.b.a. Professional Medical Products) used super absorbent polymers in sanitary napkins.Super absorbent polymer was first used in Europe in a baby diaper in 1982 when Schickendanz and Beghin-Say added the material to the absorbent core. Shortly thereafter, UniCharm introduced super absorbent baby diapers in Japan while Proctor & Gamble and Kimberly-Clark in the USA began to use the material.The development of super absorbent technology and performance has been largely led by demands in the disposable hygiene segment. Strides in absorption performance have allowed the development of the ultra-thin baby diaper which uses a fraction of the materials – particularly fluff pulp – which earlier disposable diapers consumed.Over the years, technology has progressed so that there is little if any starch-grafted super absorbent polymer used in disposable hygienic products. These super absorbents typically are cross-linked acrylic homo-polymers (usually Sodium neutralized).Super absorbents used in soil amendments applications tend to be cross-linked acrylic-acrylamide co-polymers (usually Potassium neutralized).Besides granular super absorbent polymers, ARCO Chemical developed a super absorbent fiber technology in the early 1990s. This technology was eventually sold to Camelot Absorbents. There are super absorbent fibers commercially available today. While significantly more expensive than the granular polymers, the super absorbent fibers offer technical advantages in certain niche markets including cable wrap, medical devices and food packaging.Sodium polyacrylate, also known as waterlock, is a polymer with the chemical formula [-CH2-CH(COONa)-]n widely used in consumer products. It has the ability to absorb as much as 200 to 300 times its mass in water. Acrylate polymers generally are considered to possess an anionic charge. While sodium neutralized polyacrylates are the most common form used in industry, there are also other salts available including potassium, lithium and ammonium.ApplicationsAcrylates and acrylic chemistry have a wide variety of industrial uses that include: ∙Sequestering agents in detergents. (By binding hard water elements such as calcium and magnesium, the surfactants in detergents work more efficiently.) ∙Thickening agents∙Coatings∙Fake snowSuper absorbent polymers. These cross-linked acrylic polymers are referred to as "Super Absorbents" and "Water Crystals", and are used in baby diapers. Copolymerversions are used in agriculture and other specialty absorbent applications. The origins of super absorbent polymer chemistry trace back to the early 1960s when the U.S. Department of Agriculture developed the first super absorbent polymer materials. This chemical is featured in the Maximum Absorbency Garment used by NASA.译文聚丙烯酸钠聚丙烯酸钠，又可以称为超级吸收剂或者又叫高吸水性树脂，凯博利克拉克教授曾经称它为SAM即：超级吸收性物质。

国际服务贸易外文翻译文献(含：英文原文及中文译文)文献出处：《World Development》，2015，12（1）：35-44.英文原文The research of international service trade and economic growth theoryChakraborty Kavin1 IntroductionThe study of the relation between international trade and economic growth is one of the most active issues. Since 1980s, the world has been in transition from national economy orientating towards natural resources and manufacturing industry to global and regional economy orientating towards information resources and service industry. After the signature of GA TS in1994, the institutional arrangements on liberalizing service trade result in a world-wide involvement division and exchanges of service trade, and it is undoubtedly that the positive interaction between service trade and investment leads to economic growth. But the theoretical research on service trade lags behind practice.Is it a statistic phenomenon or a universal rule of economic growth? To approach the above two issues from theoretical and empirical perspective is of great value to policy-making.For the proposition of that "International service trade will drive economic growth". Theoretical analysis shows that although service tradeis not a direct interpretative variable to economic growth, it can effect economic growth indirectly through other growing factors and technology upgrade, but the ways and mechanisms are different in different stages. In a certain stage of economic development, service trade (including investment) will have static and dynamic effect on factors supply and technology upgrade in one county, which will lead to the domestic alteration of resources condition structure. It is the enterprises that select industry structure, technology structure and trade structure according to dynamic alteration way of comparative technology structure and trade structure, which will ultimately promote evolution of economic growth gradually. So far as operational mechanism of service trade and investment is concerned, service trade affects factors supply in one country by physical capital accumulating effect, human capital effect, technology upgrade effect, institutional transition effect, employment effect and externality of technology, then influences the upgrade of industrial structure, the upgrade of technological structure and the transition of mode of economic growth. It is obvious that dynamic effect is greater than static effect; that external effect is playing more important role than internal effect; and that technology spillover effect of foreign direct investment in service industry is greater than that of service trade in a narrow sense (including across-border supply, consumption abroad and movement of natural person).For the research of mechanism about how service trade drive economic growth. Firstly, the paper verifies the causality between service trade and economic growths concerning different economic bodies and the representative countries. The results show that there are causalities between international service trade and economic growth in the whole world, in the developed countries, in the US and in china. In the developing countries, service trade is the Granger cause of economic growth; In the whole world and the developing countries, economic growth is the Granger cause of service trade; In the US, service export is the Granger cause of economic growth, and economic growth is the Granger cause of service import. On this basis, it is concluded that the opening of service industry will benefit economic growth in one country. Secondly, in order to explore on how the service trade and investment act on economic growth, empirical studies are employed to explain the case of US and that of China. The results show that the routes by which service trade affects economic growth in the US can be rowed as follows from more significant to less: employment effect, human capital effect, physical capital effect, technology effect, institution effect. The results of empirical analysis of China can be summarized that: the routes by which service export affects economic growth can be rowed as follows: employment effect, physical capital effect, institution effect, human capital effect, technology effect; the routs by which service import affectseconomic growth can be rowed as follows: technology effect, institution effect, employment effect, human capital effect, physical capital effect; the routes by which FDI in service affects economic growth can be rowed as follows: technology effect, human capital effect, institution effect, employment effect, physical capital effect. Moreover, the effect of FDI in service is stronger than service import, and the effect of service import is stronger than service export.According to the empirical test in this paper, the conclusion can be drawn as follows: service trade in a narrow sense will have static and dynamic effects on factor supply in one country through import and export of service, FDI in service industry is one of the most important cross-border transactions and is another important channel which will affect the transition of advantages on factor supply in one country. It should be emphasized that the above-mentioned channels will have different effects on countries at different stages of economic development. Whether the roles can be brought into play or not depends on given restraints. The input output of factors themselves cannot form a clear function, but will interact together and act on economic growth hand in hand through numerous feedback chain.Chinese economy is now undergoing transformation from elementary age to middle age of industrialization. Service trade and investment in current period have both advantages and disadvantages.Based on these judgments, we propose that China should pursue a policy favoring protectionism on management of service trade and adopt relevant countermeasures as follows. Scientific development view should be formed with an eye to harmonizing development of three industries so as to lay a solid industries foundation for service trade; The strategic programming should be stipulated and the market of service trade should be opened gradually; The rule of international transfer of service trade should be mastered and environment of utilizing foreign investment on service industry should be improved.As the characteristics of the world's service-oriented economy have gradually emerged, service trade originating from the upgrading of industrial structure has developed rapidly, and the scale of service trade is rapidly expanding. From the statistical data, the total exports of world service trade rose rapidly from 365 billion U.S. dollars in 1980 to 377.779 billion U.S. dollars in 2008, an increase of 9.35 times. Compared with the trade of goods with a long history, service trade is a new form of trade. With the continuous increase in absolute size and relatively low levels, service trade has become a focus of attention in modern society.2 The impact of overall service trade on economic growthAccording to the WTO General Agreement on Trade in Services (GA TS), which was signed in 1994, trade in services includes Cross- border Supply, Consumption A broad, Commercial Presence, and naturalperson mobility. (Movement of Natural Persn) Four modes. The service trade of these four modes has completely different properties and characteristics. Therefore, it is difficult to establish a unified theoretical framework for service trade to affect economic growth. The corresponding literature is very rare. The only foreign documents are mainly Robinson et al. (2002), who simply regard service trade as a commodity. Trade, without taking into account differences in the four trade models, studied the economic growth effects of service trade liberalization using the Computable General Equilibrium (CGE) model.Using empirical methods to study the literature on the impact of overall service trade on economic growth is more, but such studies are mostly domestic scholars. Research shows that the average contribution of China's overall service trade to economic growth is 18.9%.3 Effect of Service Trade in Different Industries on Economic GrowthAt present, the literature on the impact of industry trade in service trade on economic growth is mostly concentrated in such service sectors as finance, telecommunications, and health care. These studies have basically reached a relatively unanimous conclusion that the opening of the service sector or the increase in productivity can significantly promote economic growth. . For example, studies by Beck et al. (1998), M urinde & Ryan (2003), and Eschenbach (2004) suggest that the opening of the financial sector has, to a certain extent, broken the monopoly of domesticfinancial markets and prompted the orderly competition of financial markets. On the normal development track, productivity has improved, and it has finally led to economic growth in the country. Kim (2000) studied the relationship between the development of service trade in the distribution sector and the growth of total factor productivity (TFP) using Korea's input-output data. The results show that the liberalization of service trade not only significantly promoted its own TFP. The promotion also promoted the improvement of total factor productivity in the related manufacturing sector. The total factor productivity growth brought about by service trade almost covered the entire economic sector.4 Effect of Service Trade on Economic Growth by Different Trading ModesThere are few literatures on specific transaction models and theoretical studies on the impact of trade in services on economic growth. Carr et al. (2001) & M arkusen et al. (2005) theoretically examined the commercial existence model by means of the CGE model. The impact of the trade in services on economic growth shows that the opening up of trade in services is an important source of the increase in economic welfare of a country. From the perspective of economic welfare, the opening up of trade in services is a general trend. Subsequently, the use of CGE models to theoretically examine the impact of service trade on economic growth began to prevail. For example, Rutherford et al. (2005)used the CGE model to evaluate Russia's WTO accession effects, and Ko nan &Maskus (2006) used CGE models. The potential effects of Tunisia's elimination of barriers to trade in services were studied. Their conclusions indicate that the increase in the level of economic welfare in one country can benefit from the opening up of the service market, while the elimination of FDI market access barriers in the service sector is a pattern of four trades. The most important liberalization measures are the main sources of increased welfare in a country. There are a lot of literatures on the relationship between service trade and economic growth in specific models using empirical methods. In the four modes of trade in services, commercial presence is the most important one, and from the point of view of data availability, although statistical data is still not very accurate, commercial existence of service trade is based on service industry FDI as a carrier. To achieve this, researchers can use service industry FDI data to characterize the scale of service trade in this model, and this type of trade model has received more attention. Among them, Markusen (1989) believes that the existence of commercial trade in services has two positive and negative effects. The positive effect is that competition in the service sector has led to an increase in domestic demand for the sector’s production factors, which is conducive to output growth. The effect of market size and negative effects means that the intensified competition in the domestic market of service industries has led to the withdrawal ofdomestic service-oriented enterprises from the market. The study by Markusen (1989) shows that the effect of market size after the opening of the service market far exceeds the crowding-out effect. After offsetting the crowding-out effect, it can still promote the productivity improvement of the non-service sector and further lead to the structure of domestic trade in goods. The changes, those sectors that were previously low in productivity and dependent on imports, will evolve into high-productivity export sectors, which is quite similar to the latest research findings on the interactive development of producer services and manufacturing. Hoekman (2006) and Hoekman (2006) used India as an example to examine the impact of the existence of commercial trade in services in the finance, telecommunications, and transportation sectors on the competitiveness of the goods export sector, and believe that these sectors have been liberalized. The level of soft facilities has been increased, which in turn has greatly reduced the operating costs of the downstream product manufacturing sector, which has increased the export competitiveness. With the inefficiency of the domestic service industry, the unfavorable pattern is reversed with the help of commercial presence of service trade. Feasible choice. Guerrieri et al. (2005) took the EU as the research object and analyzed the role of commercial trade in services for knowledge accumulation and economic growth. The study concluded that the openness of the service market or the relaxation of domesticservice regulations has positively promoted economic growth. It was found that the imported service items may be more able to promote economic growth than the domestic same service items due to high technological content.5 Possible Future Research DirectionsIt is not difficult to find from the above-mentioned documents that since the development of service trade started late, research on the growth of service trade began to rise gradually from the 1980s, and more than 20 years of research in this area is in the ascendant. With the further enhancement of the status of trade in services, the possible directions for future research will generally include the following aspects.From the point of view of research methodology, classification of service trade can be studied. As the theory of goods trade has gradually matured, the development practice of service trade still calls for the birth of the theory of service trade. Helpman and Markusen, international economists, expressed on different occasions that the difficulty in establishing the theoretical system of service trade lies in the fact that there are large differences in various types of service trades, and it is difficult for researchers to overcome the gap between them. Classifying service trade according to certain standards and exploring the impact of various types of service trade on economic growth is a possible direction for future research.From the perspective of the research subjects, it is possible to study China’s service trade and economic growth. China’s GDP has already ranked second in the world. However, the service industry’s added value accounted for only 40% of GDP, which is obviously not commensurate with the status of an economic power. In addition, the trade in services is still relatively small compared to the trade in goods. Under such a realistic background, what is the relationship between China's service trade and economic growth? How will service trade contribute to China's economic growth? What impact will service outsourcing have on China's economy? With China in In the next decade, how will China make service trade an engine of economic growth? From the academic point of view, economists from all countries are paying attention to China’s economic development, and China’s service trade will also be improved. It will become a research hotspot.From the perspective of research topics, it is possible to study the impact of service outsourcing on economic growth. In 2008, the scale of global service outsourcing market has reached 1.5 trillion US dollars. According to the UNCTAD (UNCT AD) speculation, the global service outsourcing market will increase by 30%-40% in the next 5-10 years.The surging service industry outsourcing is a new form of service trade. How does service outsourcing drive economic growth through employment, industrial structure upgrading, and technology spillovers?What are the differences in the impact of contracting and receiving services on economic growth in the service industry? Research on these issues will start with the development of service outsourcing to important theoretical guidance.中文译文国际服务贸易与经济增长理论与实证研究Chakraborty Kavin1 引言国际贸易与经济增长始终是国际经济学最生动的论题之一。

英文文献整篇翻译Title: The Impact of Climate Change on BiodiversityClimate change is a pressing issue that has significant impacts on biodiversity worldwide. Changes in temperature, precipitation patterns, and extreme weather events are altering ecosystems and threatening the survival of many species. The loss of biodiversity not only affects the natural world but also has implications for human societies.One of the major impacts of climate change onbiodiversity is the shifting of habitats. As temperatures rise, many species are forced to move to higher latitudesor elevations in search of suitable conditions. This can disrupt ecosystems and lead to the decline or extinction of species that are unable to adapt to the new conditions.In addition to habitat loss, climate change is also causing changes in the timing of biological events such as flowering, migration, and reproduction. These changes can disrupt the delicate balance of ecosystems and lead to mismatches between species that depend on each other for survival.Furthermore, climate change is exacerbating otherthreats to biodiversity such as habitat destruction, pollution, and overexploitation. The combination of these factors is putting immense pressure on many species and pushing them closer to extinction.It is essential that we take action to mitigate the impacts of climate change on biodiversity. This includes reducing greenhouse gas emissions, protecting and restoring habitats, and implementing conservation measures to safeguard vulnerable species. By addressing the root causes of climate change and protecting biodiversity, we canensure a sustainable future for both the natural world and human societies.气候变化对生物多样性的影响气候变化是一个紧迫的问题，对全球的生物多样性产生重大影响。

（（英文参考文献及译文）二〇一六年六月本科毕业论文 题 目：STATISTICAL SAMPLING METHOD, USED INTHE AUDIT学生姓名：王雪琴学 院：管理学院系 别：会计系专 业：财务管理班 级：财管12-2班 学校代码： 10128 学 号： 201210707016Statistics and AuditRomanian Statistical Review nr. 5 / 2010STATISTICAL SAMPLING METHOD, USED IN THE AUDIT - views, recommendations, fi ndingsPhD Candidate Gabriela-Felicia UNGUREANUAbstractThe rapid increase in the size of U.S. companies from the earlytwentieth century created the need for audit procedures based on the selectionof a part of the total population audited to obtain reliable audit evidence, tocharacterize the entire population consists of account balances or classes oftransactions. Sampling is not used only in audit – is used in sampling surveys,market analysis and medical research in which someone wants to reach aconclusion about a large number of data by examining only a part of thesedata. The difference is the “population” from which the sample is selected, iethat set of data which is intended to draw a conclusion. Audit sampling appliesonly to certain types of audit procedures.Key words: sampling, sample risk, population, sampling unit, tests ofcontrols, substantive procedures.Statistical samplingCommittee statistical sampling of American Institute of CertifiedPublic Accountants of (AICPA) issued in 1962 a special report, titled“Statistical sampling and independent auditors’ which allowed the use ofstatistical sampling method, in accordance with Generally Accepted AuditingStandards (GAAS). During 1962-1974, the AICPA published a series of paperson statistical sampling, “Auditor’s Approach to Statistical Sampling”, foruse in continuing professional education of accountants. During 1962-1974,the AICPA published a series of papers on statistical sampling, “Auditor’sApproach to Statistical Sampling”, for use in continuing professional educationof accountants. In 1981, AICPA issued the professional standard, “AuditSampling”, which provides general guidelines for both sampling methods,statistical and non-statistical.Earlier audits included checks of all transactions in the period coveredby the audited financial statements. At that time, the literature has not givenparticular attention to this subject. Only in 1971, an audit procedures programprinted in the “Federal Reserve Bulletin (Federal Bulletin Stocks)” includedseveral references to sampling such as selecting the “few items” of inventory.Statistics and Audit The program was developed by a special committee, which later became the AICPA, that of Certified Public Accountants American Institute.In the first decades of last century, the auditors often applied sampling, but sample size was not in related to the efficiency of internal control of the entity. In 1955, American Institute of Accountants has published a study case of extending the audit sampling, summarizing audit program developed by certified public accountants, to show why sampling is necessary to extend the audit. The study was important because is one of the leading journal on sampling which recognize a relationship of dependency between detail and reliability testing of internal control.In 1964, the AICPA’s Auditing Standards Board has issued a report entitled “The relationship between statistical sampling and Generally Accepted Auditing Standards (GAAS)” which illustrated the relationship between the accuracy and reliability in sampling and provisions of GAAS.In 1978, the AICPA published the work of Donald M. Roberts,“Statistical Auditing”which explains the underlying theory of statistical sampling in auditing.In 1981, AICPA issued the professional standard, named “Audit Sampling”, which provides guidelines for both sampling methods, statistical and non-statistical.An auditor does not rely solely on the results of a single procedure to reach a conclusion on an account balance, class of transactions or operational effectiveness of the controls. Rather, the audit findings are based on combined evidence from several sources, as a consequence of a number of different audit procedures. When an auditor selects a sample of a population, his objective is to obtain a representative sample, ie sample whose characteristics are identical with the population’s characteristics. This means that selected items are identical with those remaining outside the sample.In practice, auditors do not know for sure if a sample is representative, even after completion the test, but they “may increase the probability that a sample is representative by accuracy of activities made related to design, sample selection and evaluation” [1]. Lack of specificity of the sample results may be given by observation errors and sampling errors. Risks to produce these errors can be controlled.Observation error (risk of observation) appears when the audit test did not identify existing deviations in the sample or using an inadequate audit technique or by negligence of the auditor.Sampling error (sampling risk) is an inherent characteristic of the survey, which results from the fact that they tested only a fraction of the total population. Sampling error occurs due to the fact that it is possible for Revista Română de Statistică nr. 5 / 2010Statistics and Auditthe auditor to reach a conclusion, based on a sample that is different from the conclusion which would be reached if the entire population would have been subject to audit procedures identical. Sampling risk can be reduced by adjusting the sample size, depending on the size and population characteristics and using an appropriate method of selection. Increasing sample size will reduce the risk of sampling; a sample of the all population will present a null risk of sampling.Audit Sampling is a method of testing for gather sufficient and appropriate audit evidence, for the purposes of audit. The auditor may decide to apply audit sampling on an account balance or class of transactions. Sampling audit includes audit procedures to less than 100% of the items within an account balance or class of transactions, so all the sample able to be selected. Auditor is required to determine appropriate ways of selecting items for testing. Audit sampling can be used as a statistical approach and a non- statistical.Statistical sampling is a method by which the sample is made so that each unit consists of the total population has an equal probability of being included in the sample, method of sample selection is random, allowed to assess the results based on probability theory and risk quantification of sampling. Choosing the appropriate population make that auditor’ findings can be extended to the entire population.Non-statistical sampling is a method of sampling, when the auditor uses professional judgment to select elements of a sample. Since the purpose of sampling is to draw conclusions about the entire population, the auditor should select a representative sample by choosing sample units which have characteristics typical of that population. Results will not extrapolate the entire population as the sample selected is representative.Audit tests can be applied on the all elements of the population, where is a small population or on an unrepresentative sample, where the auditor knows the particularities of the population to be tested and is able to identify a small number of items of interest to audit. If the sample has not similar characteristics for the elements of the entire population, the errors found in the tested sample can not extrapolate.Decision of statistical or non-statistical approach depends on the auditor’s professional judgment which seeking sufficient appropriate audits evidence on which to completion its findings about the audit opinion.As a statistical sampling method refer to the random selection that any possible combination of elements of the community is equally likely to enter the sample. Simple random sampling is used when stratification was not to audit. Using random selection involves using random numbers generated byRomanian Statistical Review nr. 5 / 2010Statistics and Audit a computer. After selecting a random starting point, the auditor found the first random number that falls within the test document numbers. Only when the approach has the characteristics of statistical sampling, statistical assessments of risk are valid sampling.In another variant of the sampling probability, namely the systematic selection (also called random mechanical) elements naturally succeed in office space or time; the auditor has a preliminary listing of the population and made the decision on sample size. “The auditor calculated a counting step, and selects the sample element method based on step size. Step counting is determined by dividing the volume of the community to sample the number of units desired. Advantages of systematic screening are its usability. In most cases, a systematic sample can be extracted quickly and method automatically arranges numbers in successive series.”[2].Selection by probability proportional to size - is a method which emphasizes those population units’recorded higher values. The sample is constituted so that the probability of selecting any given element of the population is equal to the recorded value of the item;Stratifi ed selection - is a method of emphasis of units with higher values and is registered in the stratification of the population in subpopulations. Stratification provides a complete picture of the auditor, when population (data table to be analyzed) is not homogeneous. In this case, the auditor stratifies a population by dividing them into distinct subpopulations, which have common characteristics, pre-defined. “The objective of stratification is to reduce the variability of elements in each layer and therefore allow a reduction in sample size without a proportionate increase in the risk of sampling.” [3] If population stratification is done properly, the amount of sample size to come layers will be less than the sample size that would be obtained at the same level of risk given sample with a sample extracted from the entire population. Audit results applied to a layer can be designed only on items that are part of that layer.I appreciated as useful some views on non-statistical sampling methods, which implies that guided the selection of the sample selecting each element according to certain criteria determined by the auditor. The method is subjective; because the auditor selects intentionally items containing set features him.The selection of the series is done by selecting multiple elements series (successive). Using sampling the series is recommended only if a reasonable number of sets used. Using just a few series there is a risk that the sample is not representative. This type of sampling can be used in addition to other samples, where there is a high probability of occurrence of errors. At the arbitrary selection, no items are selected preferably from the auditor, Revista Română de Statistică nr. 5 / 2010Statistics and Auditthat regardless of size or source or characteristics. Is not the recommended method, because is not objective.That sampling is based on the auditor’s professional judgment, which may decide which items can be part or not sampled. Because is not a statistical method, it can not calculate the standard error. Although the sample structure can be constructed to reproduce the population, there is no guarantee that the sample is representative. If omitted a feature that would be relevant in a particular situation, the sample is not representative.Sampling applies when the auditor plans to make conclusions about population, based on a selection. The auditor considers the audit program and determines audit procedures which may apply random research. Sampling is used by auditors an internal control systems testing, and substantive testing of operations. The general objectives of tests of control system and operations substantive tests are to verify the application of pre-defined control procedures, and to determine whether operations contain material errors.Control tests are intended to provide evidence of operational efficiency and controls design or operation of a control system to prevent or detect material misstatements in financial statements. Control tests are necessary if the auditor plans to assess control risk for assertions of management.Controls are generally expected to be similarly applied to all transactions covered by the records, regardless of transaction value. Therefore, if the auditor uses sampling, it is not advisable to select only high value transactions. Samples must be chosen so as to be representative population sample.An auditor must be aware that an entity may change a special control during the course of the audit. If the control is replaced by another, which is designed to achieve the same specific objective, the auditor must decide whether to design a sample of all transactions made during or just a sample of transactions controlled again. Appropriate decision depends on the overall objective of the audit test.Verification of internal control system of an entity is intended to provide guidance on the identification of relevant controls and design evaluation tests of controls.Other tests:In testing internal control system and testing operations, audit sample is used to estimate the proportion of elements of a population containing a characteristic or attribute analysis. This proportion is called the frequency of occurrence or percentage of deviation and is equal to the ratio of elements containing attribute specific and total number of population elements. WeightRomanian Statistical Review nr. 5 / 2010Statistics and Audit deviations in a sample are determined to calculate an estimate of the proportion of the total population deviations.Risk associated with sampling - refers to a sample selection which can not be representative of the population tested. In other words, the sample itself may contain material errors or deviations from the line. However, issuing a conclusion based on a sample may be different from the conclusion which would be reached if the entire population would be subject to audit.Types of risk associated with sampling:Controls are more effective than they actually are or that there are not significant errors when they exist - which means an inappropriate audit opinion. Controls are less effective than they actually are that there are significant errors when in fact they are not - this calls for additional activities to establish that initial conclusions were incorrect.Attributes testing - the auditor should be defining the characteristics to test and conditions for misconduct. Attributes testing will make when required objective statistical projections on various characteristics of the population. The auditor may decide to select items from a population based on its knowledge about the entity and its environment control based on risk analysis and the specific characteristics of the population to be tested.Population is the mass of data on which the auditor wishes to generalize the findings obtained on a sample. Population will be defined compliance audit objectives and will be complete and consistent, because results of the sample can be designed only for the population from which the sample was selected.Sampling unit - a unit of sampling may be, for example, an invoice, an entry or a line item. Each sample unit is an element of the population. The auditor will define the sampling unit based on its compliance with the objectives of audit tests.Sample size - to determine the sample size should be considered whether sampling risk is reduced to an acceptable minimum level. Sample size is affected by the risk associated with sampling that the auditor is willing to accept it. The risk that the auditor is willing to accept lower, the sample will be higher.Error - for detailed testing, the auditor should project monetary errors found in the sample population and should take into account the projected error on the specific objective of the audit and other audit areas. The auditor projects the total error on the population to get a broad perspective on the size of the error and comparing it with tolerable error.For detailed testing, tolerable error is tolerable and misrepresentations Revista Română de Statistică nr. 5 / 2010Statistics and Auditwill be a value less than or equal to materiality used by the auditor for the individual classes of transactions or balances audited. If a class of transactions or account balances has been divided into layers error is designed separately for each layer. Design errors and inconsistent errors for each stratum are then combined when considering the possible effect on the total classes of transactions and account balances.Evaluation of sample results - the auditor should evaluate the sample results to determine whether assessing relevant characteristics of the population is confirmed or needs to be revised.When testing controls, an unexpectedly high rate of sample error may lead to an increase in the risk assessment of significant misrepresentation unless it obtained additional audit evidence to support the initial assessment. For control tests, an error is a deviation from the performance of control procedures prescribed. The auditor should obtain evidence about the nature and extent of any significant changes in internal control system, including the staff establishment.If significant changes occur, the auditor should review the understanding of internal control environment and consider testing the controls changed. Alternatively, the auditor may consider performing substantive analytical procedures or tests of details covering the audit period.In some cases, the auditor might not need to wait until the end audit to form a conclusion about the effectiveness of operational control, to support the control risk assessment. In this case, the auditor might decide to modify the planned substantive tests accordingly.If testing details, an unexpectedly large amount of error in a sample may cause the auditor to believe that a class of transactions or account balances is given significantly wrong in the absence of additional audit evidence to show that there are not material misrepresentations.When the best estimate of error is very close to the tolerable error, the auditor recognizes the risk that another sample have different best estimate that could exceed the tolerable error.ConclusionsFollowing analysis of sampling methods conclude that all methods have advantages and disadvantages. But the auditor is important in choosing the sampling method is based on professional judgment and take into account the cost / benefit ratio. Thus, if a sampling method proves to be costly auditor should seek the most efficient method in view of the main and specific objectives of the audit.Romanian Statistical Review nr. 5 / 2010Statistics and Audit The auditor should evaluate the sample results to determine whether the preliminary assessment of relevant characteristics of the population must be confirmed or revised. If the evaluation sample results indicate that the relevant characteristics of the population needs assessment review, the auditor may: require management to investigate identified errors and likelihood of future errors and make necessary adjustments to change the nature, timing and extent of further procedures to take into account the effect on the audit report.Selective bibliography:[1] Law no. 672/2002 updated, on public internal audit[2] Arens, A şi Loebbecke J - Controve …Audit– An integrate approach”, 8th edition, Arc Publishing House[3] ISA 530 - Financial Audit 2008 - International Standards on Auditing, IRECSON Publishing House, 2009- Dictionary of macroeconomics, Ed C.H. Beck, Bucharest, 2008Revista Română de Statistică nr. 5 / 2010Statistics and Audit摘要美国公司的规模迅速增加，从第二十世纪初创造了必要的审计程序，根据选定的部分总人口的审计，以获得可靠的审计证据，以描述整个人口组成的帐户余额或类别的交易。