AWS D1.1/D1.1M:2002Structural Welding Code — SteelAWS D1.1/D1.1M:2002 An American National StandardStructural Welding Code — SteelCOPYRIGHT 2003; American Welding Society, Inc. 00:02:09 MDT Questions or comments about this message: please call the DocumentDocument provided by IHS Licensee=Aramco HQ/9980755100, User=, 04/24/20031Policy Management Group at 1-800-451-1584.AWS D1.1/D1.1M:2002Structural Welding Code — SteelAWS D1.1/D1.1M:2002 An American National Standard Approved by American National Standards Institute August 31, 2001Structural Welding Code — Steel18th Edition Supersedes AWS D1.1:2002Prepared by AWS D1 Committee on Structural WeldingUnder the Direction of AWS Technical Activities CommitteeApproved by AWS Board of DirectorsAbstractThis code covers the welding requirements for any type of welded structure made from the commonly used carbon and low-alloy constructional steels. Sections 1 through 8 constitute a body of rules for the regulation of welding in steel construction. There are twelve mandatory and fifteen nonmandatory annexes in this code. A Commentary of the code is included with the document.550 N.W. LeJeune Road, Miami, Florida 33126COPYRIGHT 2003; American Welding Society, Inc. 00:02:09 MDT Questions or comments about this message: please call the DocumentDocument provided by IHS Licensee=Aramco HQ/9980755100, User=, 04/24/20032Policy Management Group at 1-800-451-1584.AWS D1.1/D1.1M:2002Structural Welding Code — Steel1 General Requirements 通用原则1.1 Scope 适用范围This code contains the requirements for fabricating and erecting welded steel structures. When this code is stipulated in contract documents, conformance with all provisions of the code shall be required, except for those provisions that the Engineer (see 1.4.1) or contract documents specifically modifies or exempts. 本规范包括制作和安装焊接钢结构的要求。
