T21一体遥控器说明书-V1.2.1

控制器操作说明书2010年12月V 2.1首先感谢贵公司选用我公司的制冷机组产品.同时感谢您认真阅读本操作说明书。

一、 概述本机组使用的是触摸式操作显示屏。

机组的运行状态和全部操作均在屏幕上进行。

屏幕操作是通过已为该机组设置了各相应的屏幕页面及其按钮，您可以按照您的操作要求轻按各有关的按钮进行实际的操作。

屏幕中的按钮是轻触摸式的，请不使用工具或戴手套操作，以免划伤擦毛屏幕。

本控制器中显示的参数单位：压力：Kpa A 绝压温度：℃电流：Ａ液位：％设备在完全正常的情况下，10分钟内对屏幕无任何操作屏幕的灯光会自动关闭，以延长屏幕使用寿命。

任意触摸一下屏幕立即自动点亮。

屏幕中含有设备的常见故障说明，用户可以随时翻阅。

帮助用户及时查找原因排除故障。

温度巡检仪显示的是主电机的各点温度：CH01 前轴承温度CH02 后轴承温度CH03 Ａ绕组温度CH04 Ｂ绕组温度CH05 Ｃ绕组温度二、 主界面屏幕的操作说明接通电源后屏幕将显示本说明书封面上的图案，触摸该图案一下，屏幕就显示如下：主界面。

此界面中显示了常用的基本运行参数、机组状态和必要的操作按钮，当出现故障、报警时自动弹出信息条并用文字（走马灯形式）显示相应的内容，蓝色信息属报警（机组不停机），红色信息属故障（机组停机，故障复位也不会自动启动）。

触摸“机组启动”按钮，在屏幕上会弹出如下窗条：♦轻按“能量控制手动”按钮，在主界面的右上角能量位置值的下面将出现“＋”、“－”按钮，表示机组运行中能量控制由操作人员人为地增载、减载操作。

但当运行参数超过安全保护设定值，电脑仍会自动强制减载甚至故障停机。

♦轻按“能量控制自动”按钮，“＋”、“－”按钮将不出现，表示机组运行中能量控制由电脑自动地增载、减载操作。

♦轻按“本地启动”按钮，请注意：这是真正的启动按钮。

机组由电脑按指定的程序自动控制启动、运行、自动能量调节和液位控制。

♦启动过程：电脑首先检查无任何故障，再检查吸气压力应大于‘压缩机启动压力设定值’、‘高压电机柜允许’、‘停机到启动间隔时间到’等；电脑启动油泵，检查能量位置应小于 5%（否则自动减载）、喷油压差应大于150Kpa；释放主机停机信号，1秒钟后发主机启动命令。

2023年智能遥控器操作与配置手册智能技术近年来发展迅猛，各种智能设备也越来越常见。

智能遥控器是一种常见的智能设备，适用于电视、空调、音响等众多家用电器。

本篇文章将为大家介绍2023年智能遥控器的操作和配置方法。

一、基本使用1.连接设备：首次使用遥控器前，需先将其与设备进行连接。

具体方法为：打开遥控器电源，进入遥控器设置页面，选择“连接设备”，根据提示将遥控器对准设备进行连接即可。

2.操作设备：连接完成后，可以直接使用遥控器对设备进行操作。

例如，选择音响，则需要在遥控器上选择“音响”选项，然后根据遥控器界面提示，选择相应歌曲、调节音量等。

3.常见问题解决：使用过程中遇到无法操作、连接断开等问题，可直接在遥控器设置页面查看常见问题并进行修复。

二、高级功能1.语音识别：遥控器支持语音识别，可以直接使用语音指令进行操作。

例如，说出“打开电视”，遥控器会自动打开电视。

2.智能推荐：根据用户的使用习惯和观看记录，遥控器可以智能推荐相关内容，例如推荐电视节目、音乐、电影等。

3.定时开关：用户可以在遥控器设置页面进行定时开关的设置。

例如，可以设置每天晚上10点关掉电视、音响等设备，避免浪费能源。

4.远程控制：用户可以通过手机等设备远程控制家中的电器。

例如，在外出时，用户可以通过手机遥控器应用程序远程控制电视开、关。

三、配置方法1.遥控器绑定：遥控器支持多设备绑定。

用户可以在遥控器设置页面中选择“设备绑定”，并按照提示进行绑定操作。

2.设备连接：在遥控器设置页面中，选择“连接设备”选项，并根据提示对设备进行连接操作。

3.关联账号：用户可以在遥控器设置页面中选择“账号关联”，并关联自己的账号。

这样，遥控器可以根据用户的使用习惯进行智能推荐，提高使用体验。

综上所述，2023年智能遥控器的操作和配置方法十分简便，同时支持语音识别、智能推荐、定时开关、远程控制等高级功能，带来更加智能化的家居体验。

Release NotesSmart Home Controller 2.1ContentsEaton-SHC-7.5-2.1.x (3)Features and Enhancements (3)Push Notification support iOS and Android Devices (3)New Smart Dimming Actuator support (3)Camera support (3)Adaptive Heating (3)Enhancements (3)Fixed Issues (3)SHC restart issue (OS and Boot Loader check) (3)Cannot import the MRF SHC configuration (4)Dimmer going to 100% (4)Devices looks disappeared after remote update (4)Planner event also saved in defaultPlanner (4)Change name of Group Devices (4)No Icon in web-View for Switching Actuator is locked (4)Change of the planner on iPhone not possible (4)No picture for a Scene in Dashboard Tile (4)Delays > 20s can't be configured easily for scenes in Web View (4)If Climate Function is switched from manual to Auto Mode the Function should switch to the last programmed Temperature mode from the Planner (4)Floor heating protection is not described in help (4)No Zones after import of MRF configuration into the SHC (4)Deactivating a scene on the Main Dashboard by another macro does disable this Tile (4)iOS App re-connection problem from background (4)It is not possible to delete the history data from an impulse counter (4)Temperature indicator is in % instead of °C (4)Cannot make a changes in device tab for configurations with replaced devices (5)Update can't be started from browser which was used for SHC 2.0.1 management without cache cleaning (5)Known Issues (5)No SHC IP Address in MRF (5)Macro doesn’t work after changing the device type (5)Planner event name “null” (5)Users are deleted after import MRF file (5)Status & Control Function order of devices (5)Alarm Function Armed/Disarmed in Main Dashboard (5)Workarounds in case of update from 1.1.30 -> 2.x.x (6)ECIs should be on-line (6)Group devices not displayed correctly (6)Old devices can appear again (6)Missing group devices in Macros or Scenes (6)Eaton-SHC-7.5-2.1.xFeatures and EnhancementsPush Notification support iOS and Android Devices•Automatic registration of used iOS and Android devices for SHC Push notifications.•Push notification supported in Macro and Alarm Function.New Smart Dimming Actuator support•Smart Dimmer supported in Status & Control and Macro Function•Lock, UnLock and Overload indication. Power consumption for EMS types.•Predefined DIM Profiles programmable via Web Admin Console device configuration.•RF module firmware has to be updated to support new dimming actuators.Camera support•Available Camera Drivers: SerComm, Panasonic, ZyXEL, Mobotix, Axis, IPCAM, Compro.•Additional ONVIF-CPT Driver with Pan and Tilt support.•New Generic driver to support Cameras providing still images in case Cameras are incompatible with ONVIF or other drivers.Adaptive Heating•Climate function in automatic mode supports Learning mode that will automatically adapt the Inertia time to optimal value based on monitoring planner events/temperature set points and actual temperature.Enhancements•Eaton App iOS 9 support.•Improved iOS App connection handling.•Improved support of new switching actuators relating to protective functions of the actuator (locked, over…).•Support of memory function of dimming actuators in Status & Control Function.•Unnecessary restart after RF Firmware update was eliminated.•Kernel and Boot Loader update check.Fixed IssuesSHC restart issue (OS and Boot Loader check)Issue with restarting of the SHC is solved in case the OS and Boot Loader are not up-to-date. The OS Update Button will become available after the update to this Smart Home Controller 2.1 release (Tab Diagnostics -> System Status):Please check if this update button is available (Refresh browser if needed) and start the update if available.Cannot import the MRF SHC configurationIssue with configuration import problems fixed in MRF.Dimmer going to 100%Changed the behavior of the On/Off button in the Status & Control Function for Dimmers. Now the dimmer will to the memory position when switching On.Devices looks disappeared after remote updateThe user is forced to re-login after the end of the update process via remote access.Planner event also saved in defaultPlannerSolved the issue that planner events are also saved in the defaultPlanner.Change name of Group DevicesSolved an issue that the name of group devices could not be changed directly in the SHC itself.No Icon in web-View for Switching Actuator is lockedIn the Web-View the status of locked Actuators is supported in the Status & Control Function. Change of the planner on iPhone not possibleSolved an issue that changed planner events via the App were not present in the active planner.No picture for a Scene in Dashboard TileIf no picture is selected for a Scene on the Main Dashboard a default picture is shown.Delays > 20s can't be configured easily for scenes in Web ViewIn the Web View delays > 20s can be directly entered for actions in Scenes.If Climate Function is switched from manual to Auto Mode the Function should switch to the last programmed Temperature mode from the PlannerThe system was modified to behave as expected.Floor heating protection is not described in helpThe help file is updated with required information.No Zones after import of MRF configuration into the SHCIssue solved in MRF.Deactivating a scene on the Main Dashboard by another macro does disable this TileSolved an issue enable and disable Scene Tiles on the Main Dashboard.iOS App re-connection problem from backgroundSolved an App reconnecting issue using an iPhone 6 updated to iOS 9.0.1 in an external Wi-Fi network.It is not possible to delete the history data from an impulse counterDevice parameters now available in the Web Admin/Devices.Temperature indicator is in % instead of °CSolved an issue that when temperature sensor was in mode 2 (first channel is analog input, second channel is binary input) the system used % as the unit.Cannot make a changes in device tab for configurations with replaced devicesSolved an issue with Device configurations changes after replaced of a device in MRF. Update can't be started from browser which was used for SHC 2.0.1 management without cache cleaningSolved the issue in the cache handling for the Web Admin.Known IssuesNo SHC IP Address in MRFThe IP Address of the SHC is not shown in the SHC configuration in MRF. Workaround: Use the other methods to discover the IP address of the Smart Home Controller: •Check your router for assigned IP addresses•Via Bonjour (MAC)•Via UPnP (Windows)See also the SHC Assembly Instructions delivered with the box.Note: MRF can read IP address from SHC controller provided no RF scanning by MRF tool is performed after SHC startup.IP address is not correct shown in the MRF: Information about current IP address can be removed during RF scanning. The system however keeps the correct address, it is not just visible in web admin. If needed reboot the system after RF scanning to re-load the current IP address.Macro doesn’t work after changing the device typeIn case a device type is changed which is already used in a macro, it is possible that the state values does not match the new type anymore. In this case the macros doesn’t work anymore. Always edit the changed devices in macros.Planner event name “null”A Planner event pointing to a deleted macro will show “null” instead of the deleted macro name. Workaround: Remove the Planner event.Users are deleted after import MRF fileSHC configuration file can be created both by MRF and SHC Web Admin Console. Be sure that all changes done by SHC Web Admin Console are present in back-up and the back-up is imported into MRF project before you export SHC configuration from MRF and use the configuration in SHC.E.g. if users are created in the SHC but not yet imported in MRF the Users will be deleted after import of the MRF file which not contain this information.Status & Control Function order of devicesThe order and display preferences of devices in the Status & Control Function is only supported in the Web View. Workaround: If the order of Devices needs to be changed, login via a browser as Advanced User and click the edit button in the Status & Control Function. Alarm Function Armed/Disarmed in Main DashboardThe Alarm Function Armed/Disarmed Tile in the Main Dashboard is only supported in the Web View. Workaround: Enable/Disable the Alarm in Scenes (like Sleep, Away, Armed or Disarmed). Enable the Scene buttons to show on the Main Dashboard.Workarounds in case of update from 1.1.30 -> 2.x.xECIs should be on-lineIn case of a 1.1.30 update all ECIs in the system should be on-line during the update. Always make a backup of your system before starting the update. In case of missing devices after the update, use the MRF tool to convert your configuration files (SHC cfg, MRF project) to the new format and import the converted configuration to your SHC.Group devices not displayed correctlyImporting 1.1.30 SHC configuration to SHC 2.0 may result in problem with group devices not displayed correctly: Import the 1.1.30 SHC configuration in MRF, do the export of configuration in MRF and then import the "new" configuration into SHC.Old devices can appear againRecently removed devices can appear again after update: Use MRF to remove these group devices and then import the new configuration in the SHC.Missing group devices in Macros or ScenesIn case of missing group devices in Macros or Scenes after the update: Check theMacros/Scenes for missing group devices and replace the missing group with the existing one. The name of the group devices can be found in the System/Devices tab.。

机器人遥控操作说明书操作部分：一、遥控器外观遥控器为方形设计，尺寸为15cm x 10cm，颜色为黑色。

遥控器正面有一个LCD显示屏，显示机器人工作状态以及相关提示信息。

遥控器上方有一排功能按键，包括电源开关、前进、后退、左转、右转、停止等基本操作按键。

遥控器侧面设有一个充电接口，用于给遥控器充电。

二、遥控器指示灯说明在遥控器正面，有三个指示灯，分别为电量指示灯、连接指示灯和工作指示灯。

电量指示灯用于显示遥控器的电量剩余情况，绿色表示剩余电量充足，红色表示电量即将耗尽需要充电。

连接指示灯用于显示遥控器与机器人的连接状态，蓝色表示连接正常，红色表示连接异常。

工作指示灯用于显示机器人的工作状态，绿色表示机器人正常工作，红色表示机器人停止工作。

三、遥控器电源开关遥控器侧面的电源开关用于控制遥控器的开关机。

打开遥控器电源开关后，电量指示灯会亮起，显示遥控器的电量情况。

关闭电源开关后，遥控器将无法使用，同时电量指示灯熄灭。

四、基本操作说明1. 前进：按下遥控器上的“前进”按键，机器人将向前直线行驶，持续按下可加快机器人前进速度。

2. 后退：按下遥控器上的“后退”按键，机器人将向后直线行驶，持续按下可加快机器人后退速度。

3. 左转：按下遥控器上的“左转”按键，机器人将左转一个固定角度，持续按下可使机器人持续左转。

4. 右转：按下遥控器上的“右转”按键，机器人将右转一个固定角度，持续按下可使机器人持续右转。

5. 停止：按下遥控器上的“停止”按键，机器人将停止当前的行动，处于静止状态。

五、其他功能说明1. 摄像头控制：通过遥控器上的十字方向键，可以控制机器人上的摄像头的转动方向，帮助操作者观察机器人周围的环境。

2. 声音控制：遥控器上设有音量加减按键，可以控制机器人内置喇叭的音量大小，方便与人进行语音交流。

3. 语音控制：遥控器上设有语音输入按钮，按下后可以进行语音指令输入，机器人通过语音识别技术执行相应的操作。