美标目录大全ASTM A B C D E F GP美标目录大全ASTM A-B-C-D-E-F-G-P(下)2010-12-09 A736/A736M-03低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢压力容器板Standard Specification for Pressure Vessel Plates,Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel A737/A737M-99高强度低合金钢压力容器板Standard Specification for Pressure Vessel Plates,High-Strength,Low-Alloy Steel A738/A738M-03a中温和低温装备用经热处理的碳锰硅钢压力容器板Standard Specification for Pressure Vessel Plates,Heat-Treated,Carbon-Manganese-Silicon Steel,for Moderate and Lower Temperature Service A739-90a(2000)升温或者/和加压部件用热轧合金钢棒Standard Specification for Steel Bars,Alloy,Hot-Wrought,for Elevated Temperature or Pressure-Containing Parts,or Both A740-98(2003)钢丝网(编织或者焊接电镀钢丝网)Standard Specification for Hardware Cloth(Woven or Welded Galvanized Steel Wire Fabric)A741-98(2003)马路护栏用镀锌钢丝绳和配件Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail A742/A742M-03波纹钢管用预涂聚合物和金属涂覆钢薄板Standard Specification for Steel Sheet,Met allic Coated and Polymer Prec oated for Corrugated Steel Pipe A743/A743M-03一般用耐腐蚀铬铁及镍铬铁合金铸件Standard Specification for Castings,Iron-Chromium,Iron-Chromium-Nickel,Corrosion Resistant,for General Application A744/A744M-00e1严酷条件下使用的耐腐蚀镍铬铁合金铸件Standard Specification for Castings,Iron-Chromium-Nickel,Corrosion Resistant,for Severe Service A745/A745M-94(2003)奥氏体钢锻件的超声波查验Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings A746-03排污管用球墨铸铁Standard Specification for Ductile Iron Gravity Sewer PipeA747/A747M-99沉淀硬化不锈钢铸件Standard Specification for SteelCastings,Stainless,Precipitation Hardening A748/A748M-87(2003)压力容器用静态铸造的激冷白口铁-灰口铁双金属轧辊Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use A749/A749M-97(2002)热轧碳素钢和高强度低合金钢带材通用要求Standard Specification for Steel,Strip,Carbon and High-Strength,Low-Alloy,Hot-Rolled,General Requirements for A751-01钢制品化学分析的实验方法、操作和术语Standard Test Methods,Practices,and Terminology for Chemical Analysis of Steel Products A752-04合金钢条和粗圆铁丝Standard Specification for General Requirements for Wire Rods and Coarse Round Wire,Alloy Steel A752M-04合金钢条和粗圆铁丝(国际公制)Standard Specification for General Requirements for Wire Rods and Coarse Round Wire,Alloy Steel[Metric]A753-02镍铁软磁合金Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys(UNSK94490,K94840,N14076,N14080)A754/A754M-96(2000)X射线荧光涂层厚度的试验方法Standard Test Method for Coating Weight(Mass)of Metallic Coatings on Steel by X-Ray Fluorescence A755/A755M-03外露建筑材料用热浸涂覆和用卷涂工艺预涂的钢薄板Standard Specification for Steel Sheet,Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products A756-94(2001)耐磨不锈轴承钢Standard Specification for Stainless Anti-Friction Bearing Steel A757/A757M-00低温下承压装备及其他装备用铁素体和马氏体钢铸件Standard Specification for Steel Castings,Ferritic and Marte nsitic,for Pressure-Containing and Other Applications,for Low-Temperature Service A758/A758M-00具备改进的切口韧性的对缝焊锻制碳素钢管配件Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittin gs with Improved Notch Toughness A759-00起重机用碳铁轨条Standard Specification for Carbon Steel Crane Rails A760/A760M-01a 下水道和排水沟用金属涂覆的波纹钢管Standard Specification for Corrugated Steel Pipe,Metallic-Coated for Sewers and DrainsA761/A761M-04现场栓接受、管拱和拱用波纹镀锌结构钢板Standard Specification for Corrugated Steel Structural Plate,Zinc-Coated,for Field-Bolted Pipe,Pipe-Arches,and Arches A762/A762M-00下水道和排水沟用预涂聚合物波纹钢管Standard Specification for Corrugated Steel Pipe,Polymer Precoated for Sewers and Drains A763-93(2004)铁素体不锈钢晶间腐蚀敏感性检测Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels A764-95(2001)机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝Standard Specification for Metallic Coated Carbon Steel Wire,Coated at Size and Drawn to Sizefor Mechanical Sp rings A765/A765M-01具备强力压制性韧性要求的碳素钢及低合金钢压力容器部件锻件Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements A767/A767M-00b钢筋混凝土用镀锌钢筋Standard Specification for Zinc-Coated(Galvanized)Steel Bars for Concrete Reinforcement A768-95(2001)涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件Standard Specification for Vacuum-Treated 12%Chromium Alloy Steel Forgings for Turbine Rotors and Shafts A769/A769M-00电阻焊钢结构型材Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes A770/A770M-03专用钢板通过厚度丈量进行的抗拉试验Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications A771/A771M-95(2001)增殖反应堆堆芯部件用奥氏体不锈钢管Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components A772/A772M-00正弦电流用材料的交流磁导率的试验方法Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current A773/A773M-01用带直流电子的磁滞曲线记录仪的(B-H)回路法丈量材料的磁性能的标准试验方法Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs A774/A774M-02低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures A775/A775M-04a涂环氧树脂的钢筋钢棒StandardSpecification for Epoxy-Coated Steel Reinforcing Bars A778-01焊接未退火的奥氏体不锈钢管形制品Standard Specification forWelded,Unannealed Austenitic Stainless Steel Tubular ProductsA779/A779M-00预应力混凝土用应力消除未涂覆的密实七股钢丝绞绳Standard Specification for Steel Strand,Seven-Wire,Uncoated,Compacted,Stress-Relieved for Prestressed Concrete A780-01热浸镀锌层的损坏及无覆层区域的检修Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings A781/A781M-04a一般工业用一般要求的钢和合金铸件Standard Specification for Castings,Steel and Alloy,Common Requirements,for General Industrial Use A782/A782M-90(2001)经淬火和回火的锰铬钼硅锆合金钢压力容器板Standard Specification for Pressure-Vessel Plates,Quenched-and-Tempered,Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel A786/A786M-00b轧制钢楼板Standard Specification for Hot-Rolled Carbon,Low-Alloy,High-Strength Low-Alloy,and Alloy Steel Floor Plates A787-01电阻焊金属涂覆碳素钢机械配管Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing A788-04a钢锻件Standard Specification for Steel Forgings,General Requirements A789/A789M-04a 平凡装备用无缝与焊接铁素体/奥氏体不锈钢管Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service A790/A790M-04a无缝与焊接铁素体/奥氏体不锈钢管Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe A792/A792M-03热浸工艺法处理的55%铝-锌合金涂覆钢板Standard Specification for Steel Sheet,55%Aluminum-Zinc Alloy-Coated by the Hot-Dip Process A793-96(2001)不锈钢轧制楼板Standard Specific ation for Rolled Floor Plate,Stainless Steel A794-97(2002)商品级冷轧碳素钢薄板(无上含碳量为0.16%-0.25%)Standard Specificationfor Commercial Steel(CS),Sheet,Carbon(0.16%Maximum to0.25%Maximum),Cold-Rolled A795/A795M-04防火用黑色及热浸镀锌的焊接和无缝钢管Standard Specification for Black and Hot-Dipped Zinc-Coated(Galvanized)Welded and Seamless Steel Pipe for Fire Protection Use A796/A796M-04雨水管和卫生污水管及其他地下埋设管道用波纹钢管、管托架及拱形架结构设计惯例Standard Practice for Structural Design of Corrugated Steel Pipe,Pipe-Arches,an dArches for Storm and SanitarySewers and Other Buried Applications A798/A798M-01下水道及其他近似用途用工厂制波纹钢管的安装Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other ApplicationsA799/A799M-04估算不锈钢铸件铁素体含量用仪表的校准Standard Practice for Steel Castings,Stainless,Instrument Calibration,for Estimating Ferrite Content A800/A800M-01奥氏体合金钢铸件中铁素体含量的估算Standard Practice for Steel Casting,Austenitic Alloy,Estimating Ferrite Content Thereof A801/A801M-99铁钴高磁性饱和合金Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650 A802/A802M-95(2001)钢铸件外不雅查验的表面验收标准Standard Practice for Steel Castings,Surface Acceptance Standards,Visual Examination A803/A803M-03焊接铁素体不锈钢给水加热器管Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes A804/A804M-04在电力频率下用薄钢板型试样对材料交流磁特性的测试方法Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens A805-93(2002)冷轧碳素钢扁平线Standard Specification for Steel,Flat Wire,Carbon,Cold-Rolled A807/A807M-02e1下水道及其他近似用途用波纹结构钢涂覆管的安装Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications A808/A808M-00a具备改进的切口韧性的结构级高强度低合金碳钢、锰钢、铌钢和钒钢Standard Specification for High-Strength,Low-Alloy Carbon,Manganese,Columbium,Vanadium Steel of Structural Quality with Improved Notch Toughness A809-98镀铝碳素钢丝Standard Specifi cation for Aluminum-Coated(Aluminized)Carbon Steel Wire A810-01镀锌钢管用绕网Standard Specification for Zinc-Coated(Galvanized)Steel Pipe Winding Mesh A811-03粉末冶金技术制造的软磁石零件Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy(P/M)Techniques A813/A813M-01单或者双焊接奥氏体不锈钢管Standard Specification for Single-or Double-Welded Austenitic Stainless Steel Pipe A814/A814M-03冷加工焊接奥氏体不锈钢管Standard Specification for Cold-Worked Welded Austenitic StainlessSteel Pipe A815/A815M-04锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件Standard Specification for WroughtFerritic,Ferritic/Austenitic,and Martensitic Stainless Steel Piping Fittings A8 17-03链接栅子网用金属涂覆钢丝Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire A818-91(2001)镀铜碳素钢丝Standard Specification for Coppered Carbon Steel Wire A820/A820M-04纤维增强混凝土用钢纤维Standard Specification for Steel Fibers for Fiber-Reinforced Concrete A821/A821M-99预应力混凝土容器用经回火的冷拉钢丝StandardSpecification for Steel Wire,Hard Drawn for Prestressing Concrete Tanks A822-90(2003)液压系统装备用冷拉碳素无缝钢管Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service A823-99(2003)静铸永久铸模灰铸件Standard Specification for Statically Cast Permanent Mold Gray Iron CastingsA824-01链接栅子用Marcelled拉力金属涂覆钢丝Standard Specificationfor Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence A827/A827M-02锻造及近似用途用的碳素钢板技术规范Standard Specification for Plates,Carbon Steel,for Forging and Similar Applications A829/A829M-04结构性合金钢板Standard Specification for Alloy Structural Steel Plates A830/A830M-02按照化学成分要求提供的碳素钢板技术规范Standard Specification for Plates,Carbon Steel,Structural Quality,Furnished to Chemical Composition Requirements A831/A831M-95(2000)核心部件用不锈耐热钢棒,坯段及锻件规格Standard Specification for Austenitic and Martensitic Stainless SteelBars,Billets,and Forgings for Liquid Metal Cooled Reactor Core Components A832/A832M-99e1压力容器板用铬钼钒及铬钼钒钛硼合金钢Standard Specification for Pressure Vessel Plates,AlloySteel,Chromium-Molybdenum-Vanadium A833-84(2001)用比力硬度测试仪丈量金属材料的压痕硬性Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers A834-95(2001)一般工业用铁铸件的一般要求Standard Specification for Common Requirements for Iron Castings for General Industrial Use A835-84(2000)铁合金与合金添加剂的筛分粒度Standard Specification for Sizes of Ferroalloys and Alloy Additives A836/A836M-02搪瓷管和压力容器装备用钛稳定碳素体钢锻件Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel ServiceA837/A837M-03渗碳用合金钢锻件Standard Specification for Steel Forgings,Alloy,for Carburizing Applications A838-02继电器用易切削铁素体不锈软磁合金技术规范Standard Specification for Fr ee-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay ApplicationsA839-02软磁用途的磷铁粉末冶金制造的零件技术规范Standard Specification for Iron-Phosphorus Powder Meta llurgy(P/M)Parts for Soft Magnetic Applications A840/A840M-00全处理的磁性夹层钢Standard Specification for Fully Processed Magnetic Lamination SteelA841/A841M-03a压力容器用温度机械控制工艺加工的钢板Standard Specification for Steel Plates for Pressure Vessels,Produced by Thermo-Mechanical Control Process(TMCP)A842-85(2004)高疏密程度石墨铸铁Standard Specification for Compacted Graphite Iron CastingsA844/A844M-93(1999)压力容器用直接淬火加工的含镍9%的合金钢板Standard Specification for Steel Plates,9%Nickel Alloy,for PressureVessels,Produced by the Direct-Quenching Process A845-85(2000)用于脱氧与合金钢的钛碎片Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel A846-85(2000)用于脱氧与合金钢的铝碎片Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel A847-99a(2003)具备增强耐大气腐蚀性能的冷成型焊接与无缝高强度低合金结构管Standard Specification for Cold-Formed Welded and Seamless High Strength,L ow Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance A848-01低碳磁石Standard Specification for Low-Carbon Magnetic Iron A849-00波纹钢排水管和污水管用后涂覆铺面和衬里材料Standard Specification for Post-Applied Coatings,Pavings,and Linings for Corrugated Steel Sewer and Drainage Pipe A852/A852M-03最小屈服强度为70Ksi(485MPa),厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70ksi[485 MPa]Minimum Yield Strength to 4in.[100 mm]Thick A853-04平凡碳素钢丝Standard Specification for Steel Wire,Carbon,for General Use A854/A854M-98(2003)镀锌高强度钢栅子和格架用光滑金属线Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire A855/A855M-03锌-5%铝-铈合金涂覆的钢丝绳Standard Specification for Zinc-5%Aluminum-Mischmetal Alloy-Coated Steel Wire Strand A856/A856M-03锌-5%铝-铈合金涂覆的碳素钢丝Standard Specification for Zinc-5%Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire A857/A857M-00a冷成形轻型薄钢板桩Standard Specificationfor Steel Sheet Piling,Cold Formed,Light Gage A858/A858M-00低温和腐蚀情况下用热处理碳素钢配件Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive ServiceA859/A859M-04压力容器部件用时效硬化镍铜铬钼钶低碳合金钢锻件Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components A860/A860M-00锻制高强度低合金钢的高强度对缝焊接配件Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings A861-04高硅铁管和配件Standard Specificationfor High-Silicon Iron Pipe and Fittings A862/A862M-98(2003)波纹钢污水管和排水管沥清(柏油)涂层的应用Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe A865-03钢管连接用黑色或者镀锌焊接或者无缝钢螺纹接头Standard Specification for Threaded Couplings,Steel,Black or Zinc-Coated(Galvanized)Welded or Seamless,for Use in Steel Pipe Joints A866-01耐磨中碳轴承钢Standard Specification for Medium Carbon Anti-Friction Bearing Steel A867-03继电器用铁硅钢Standard Specification for Iron-Silicon Relay Steels A871/A871M-03抗空气腐蚀的高强度低合金结构钢板Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Re sistance A872/A872M-02腐蚀环境下用离心铸造铁素体/奥氏体不锈钢管Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive EnvironmentsA874/A874M-98适于低温使用的铁素体球墨铸铁铸件Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-TemperatureService A875/A875M-02a热浸处理的锌-5%铝合金金属涂覆的钢薄板Standard Specification for Steel Sheet,Zinc-5%Aluminum Alloy-Coated by theHot-Dip Process A876-03全处理型平轧的晶粒取向的硅铁电工钢Standard Specification for Flat-Rolled,Grain-Oriented,Silicon-Iron,Electrical Steel,Fully Processed Types A877/A877M-99铬硅合金阀弹簧级钢丝Standard Specification for Steel Wire,Chromium-Silicon Alloy Valve Spring Quality A878/A878M-99经改良的铬钒阀弹簧级钢丝Standard Specification for Steel Wire,Modified Chromium Vanadium Valve Spring Quality A879-00每面镀层质量应予标明的电解镀锌薄钢板Standard Specification for Steel Sheet,Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface A881/A881M-02预应力混凝土铁路轨枕用应力消除或者应力松弛变形钢丝Standard Specification for Steel Wire,Deformed,Stress-R elievedor Low-Relaxation for Prestressed Concrete Railroad Ties A882/A882M-04a涂环氧树脂的七股预应力钢丝绳Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand A883/A883M-01非金属磁性材料铁磁共振行距和旋磁比值的测试方法Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials A884/A884M-04钢筋用涂环氧树脂的钢丝与焊接钢丝织网的技术规范Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement A885/A885M-96(2002)波纹钢制下水沟、暗渠和雨水管用锌和聚芳基酰胺纤维复合涂覆钢板Standard Specificationfor Steel Sheet,Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer,Culvert,and Underdrain Pipe A886/A886M-02预应力混凝土用应力消除的七股齿纹钢丝绳Standard Specification for SteelStrand,Indented,Seven-Wire Stress-Relieved for Prestressed ConcreteA887-89(2000)核能装备用经硼酸处理的不锈钢板、薄板及带材Standard Specification for Borated Stainless Steel Plate,Sheet,and Strip for Nuclear Application A888-04下水管、雨水管、污水管和排气管道用无衬套铸铁管和配件Standard Specification for Hubless Cast Iron Soil Pipeand Fittings for Sanitary and Storm Drain,Wa ste,and Vent Piping Applications A889/A889M-03在低感应条件下用万用表法和25厘米艾普斯亭(Epstein)框测定材料的交流磁特性的试验方法Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm(250-mm)Epstein Frame A890/A890M-99(2003)平凡应用的铁铬镍钼耐腐蚀双重(奥氏体/铁素体)铸件Standard Specification for Castings,Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant,Duplex(Austenitic/Ferritic)for General Application A891-98(2003)涡轮机转子圆盘和轮用沉淀硬化铁基超合金钢锻件Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels A892-88(2001)高碳轴承钢微不雅结构的定义和等级Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels A893/A893M-03微波频率下非金属磁性材料复合介电常数的测试方法Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies A894/A894M-00非金磁性材料的饱和磁化强度或者磁感应性能的标准试验方法Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials A895-89(2000)易切削不锈钢板、薄板和带材Standard Specification for Free-Machining Stainless Steel Plate,Sheet,and Strip A896-89(2004)电镀结构导电壳的研究Standard Practice for Conducting Case Studies on Galvanized Structures A897/A897M-03等温淬火球墨铸铁Standard Specification for Austempered Ductile Iron Castings A898/A898M-91(2001)轧制结构钢型材的直束超声查验Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes A899-91(2002)环氧涂层钢丝Standard Specification for Steel Wire,Epoxy-Coated A900/A900M-01非晶磁性带材叠装系数的测试方法Standard Test Method for Lamination Factor of Amorphous Magnetic Strip A901-03半成品型非晶形磁芯合金Standard Specification for Amorphous Magnetic Core Alloys,Semi-Processed Types A902-03与金属涂覆的钢制品涉及的标准技术术语Standard Terminology Relating to Metallic Coated Steel Products A903/A903M-99(2003)钢铸件磁粉探伤和荧光渗透查验的表面验收标准Standard Specification for Steel Castings,Surface AcceptanceStandards,Magnetic Particle and Liquid Penetrant Inspection A904-04 50镍-50铁粉末冶金(P/M)软磁合金Standard Specification for 50 Nickel-50 Iron Powder Metallurgy(P/M)Soft Magnetic Parts A905-93(1998)压力容器环绕纠缠用钢丝Standard Specification for Steel Wire,Pressure Vessel Winding A906/A906M-02高架提升装备用的80级和100级合金钢悬链规范Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting A908-03不锈钢针管Standard Specification for Stainless Steel Needle Tubing A909-03一般企业用微合金钢锻件Standard Specification for Steel Forgings,Microalloy,for General Industrial Use A910/A910M-99预应力混凝土用无涂层、无焊缝、2股及3股钢绞绳Standard Specification for Uncoated,Weldless,2-and 3-Wire Steel Strand for Prestressed Concrete A911/A911M-02预应力混凝土轨枕用无涂层的预应力消除的钢棒Standard Specification for Uncoated,Stress-Relieved Steel Bars for Prestressed Concrete TiesA912/A912M-04用万用表圆环样品法测试非晶材料在电频率条件下交流磁特性的试验方法Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal SpecimensA913/A913M-04经淬火和自回火(QST)处理的高强度低合金结构级钢型材Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality,Produced by Quenching and Self-TemperingProcess(QST)A914/A914M-92(1999)e1对末端淬火淬透性有限定要求的钢棒材技术规范Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements A915/A915M-93(2003)化学要求同锻件近是的碳素钢和合金钢Standard Specification for SteelCastings,Carbon,and Alloy,Chemical Requirements Similar to Standard Wrought Grades A917-00要求每壁标识有镀层质量用的电解工艺涂层的薄钢板材标准规范Standard Specification for Steel Sheet,Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface(General Requirements)A 918-00要求在每壁标识有涂层质量用电解工艺镀锌镍合金的薄钢板技术规范Standard Specification for Steel Sheet,Zinc-Nickel Alloy Coated by theElectrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface A920/A920M-02a具备机械特性,微合金,热锻,高质量钢棒的标准规范Standard Specification for SteelBars,Microalloy,Hot-Wrought,Special Quality,Mechanical PropertiesA921/A921M-93(1999)后热锻用微合金,高质量,热锻钢棒的标准规范Standard Specification for Steel Bars,Microalloy,Hot-Wrought,SpecialQuality,for Subsequent Hot Forging A922-93(2000)硅金属标准规范Standard Specification for Silicon Metal A923-03检测锻制双重奥氏体/铁素体不锈钢中有害金属间相的标准试验方法Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought DuplexAustenitic/Ferritic Stainless Steels A924/A924M-04用热浸镀法对薄钢板金属涂层的一般要求的标准规范Standard Specification for General Requirements for Steel Sheet,Metallic-Coated by the Hot-Dip Process A925-03锌-5%铝.混合稀土合金涂覆钢的地面金属绞线的技术规范Standard Specification for Zinc-5%Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand A926-03波纹形金属管用比力涂层材料磨耗阻力的标准测试方法Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe A927/A927M-99使用伏特计-电流计-瓦特计方法的圆环铁芯交流磁性能的标准试验方法Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method A928/A928M-04加填料金属电熔焊铁素体/奥氏体(二联)不锈钢管标准规范Standard Specification for Ferritic/Austenitic(Duplex)Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal A929/A929M-01波纹钢管用的经热浸处理的金属镀覆薄钢板标准规范Standard Specification for Steel Sheet,Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe A930-03涵洞,暴雨下水道和其他地下的排水道用波形金属管的生存的年限周期用度分析的标准惯例Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used forCulverts,Storm Sewers,and Other Buried Conduits A931-96(2002)金属丝绳和绞线拉伸试验的标准试验方法Standard Test Method for Tension Testing of Wire Ropes and Strand A932/A932M-01用瓦特计-安培计-伏特计和薄钢板样品测试在电源频率下非晶体材料交流磁性能的标准试验方法Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens A933/A933M-95(2001)加筋增强用聚氯乙烯涂层钢丝和焊接钢丝网的标准规范Standard Specification forVinyl(PVC)Coated Steel Wire and Welded Wire Fabric for Reinforcement A934/A934M-04环氧基树脂涂覆的预制增强钢棒的标准规范Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars A937/A937M-01使用临界试验面测定绝缘涂层层间阻力的标准测试方法Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces A938-97(2003)丝材抗扭试验的标准试验方法Standard Test Me thod for Torsion Testing of Wire历史上的今天：名牌阀门吹动温州美标阀门出口外贸2010-12-09蔬菜大棚用镀锌钢管2010-12-09美标钢管石油套管美标石油套管价格2010-12-09特别声明：1：资料来源于互联网，版权归属原作者2：资料内容属于网络意见，与本账号立场无关3：如有侵权，请告知，立即删除。
