SpecificationsAccuracy: ±2% of nominal range; blackbody source Repeatability: ±1% rdgTemperature Coefficient: ±0.02% nominal range per °F Temperature Compensation Range: Complies with ASTM standards over 27 to 93°C (80 to 200°F) range Operating Ambient Temperature Range: -18 to 85°C (0 to 185°F) with internal cold junction compensationAmbient Temperature Compensation: Internal temperature cold junction compensation up to 538°C (1000°F)water-cooled, 400°C (750°F) air-cooled, with cooling jacket option model OS36-APCStorage Temperature Range: -45 to 121°C (-50 to 250°F)Output Impedance: 3 k ΩResponse Time: 80 msSpectral Response: 6.5 to 14 micronsField of View: 60°; specified accuracy for target distances up to 12.7 mm (0.5")Dimensions: 44.5 L x 12.7 mm Dia. (1.75 x 0.5"); 2.4 m (8') PFA coated lead wiresHousing: Stainless steel with silicon window, hermetically encapsulatedWeight: 15 g (0.5 oz) head onlyAir FittingU No Thermal Mass Errors U No Moving Parts U S elf-Powered with No Internal or External Power Requirements U N o Frictional Heat Errors for Moving SurfacesU Temperature Compensated U U se with Standard Thermocouple Indicators and ControllersThe unique OS36 infrared thermocouple combines low cost with the advantages of non-contact temperature measurement. It produces an output signal compatible with any standard J, K, T, or E thermocouple instrumentation. The thermocouple’s accuracy is specified for target emissivity between 0.8 and 1.0. For other emissivity values, readings can be corrected to provide accurate measurements. Even without correction, the readings are extremely repeatable, for use in process and quality-control applications.Infrared ThermocouplesF o r a Com p l e t e S e l e c ti o n o f M e t e r sa n d C o n t r o l l e r sF o r U s e w i t h O M EG A ’s I n f r a r e d T h er m o c o u p l e s ,S e e o m e g a .c o mTermination StylesGMP Low-NoiseMiniature Connector *GST Low-NoiseStandard Connector ** Both the GMP and GST termination styles include the mating connector.* Specify temperature range code from range chart above.(#) Specify calibration, J, K, E or T. Note: Kit includes 1 unit each of the most popular ranges (6 total) of 1 thermocouple calibration.Note: Standard unit configuration is stripped leads. To order with GMP subminiature low-noise thermocouple connector pair, add suffix “-GMP” to model number for additional cost. To order with GST standard size low-noise thermocouple connector pair, add suffix “-GST” to model number for additional cost.Ordering Examples: OS36-K-180F, infrared thermocouple sensor, Type K, with 160 to 220°F range.OS36-J-140F-GMP, infrared thermocouple sensor, Type J, with 80 to 180°F range, GMP low-noise subminiature connectors.OCW-3, OMEGACARE SM extends standard 2-year warranty to a total of 5 years for an additional cost.Right-Angle Models †To order with right-angle view, for use in difficult-to-viewapplications, change model number from “OS36” to “OS36-RA” for additional cost.†8-angle models come with 0.9 m (3') leadsOrdering Example: OS36-RA-K-240F, infrared thermocouple, Type K, 95 to 130°C range, right-angle view, stripped lead termination.OS36 Series with Stainless Steel housing shown actual size.The DP41 thermocouple indicator is a high-accuracy meter, with 0.01° resolution; computer interface and analog/digital outputs are available.StrippedLeads–StandardOMEGACARE SM extended warranty program is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE SMcovers parts, labor and equivalent loaners.。
PT98C911LASER SENSORS • DIFFUSE REFLECTION SENSORS WITH BACKGROUND SUPPRESSIONsensor laser, diffuse-reflection sensor, 50x41x15mm, Sn: 0-600, 10-30V DC, 2x PNP Anticoincidence, Connector M12 4pin, IP67, Alu-minum+Plastic, 2kHz, Laser diode, red light, Point, Manual adjust-mentMECHANICAL FEATURESAmbient temperature -10 °C ... 50 °CDegree of protection (IP)IP67Design CuboidHousing material AluminumMaterial of optical surface PlasticReflector included in the scope of delivery-Sensor height50 mmSensor length41.4 mmSensor width15 mmStorage temperature -25 °C ... 70 °CVolume MediumWith interchangeable lens-ELECTRICAL FEATURESAlarm output-Decay time0.25 msEquipment protection class Protection class 3High repeat accuracy-Interference suppression-Max. switching distance600 mmNo-load current35 mANumber of pins4Number of switching outputs2Operating voltage 10 V ... 30 VPre-failure message-Rated switching current100 mAReaction time0.25 msResponse time0.25 msReverse polarity protection+Scanning function Light-/dark-on modeSensing range 0 mm ... 600 mmSetting procedure Manual adjustmentShort-circuit protection +ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │www.ipf.de1ELECTRICAL FEATURESSuitable for safety functions-Switching frequency2000 HzType of electrical connection Connector M12Type of switching function AnticoincidenceType of switching output PNPVoltage drop 2.4 VVoltage type DCWith communication interface, RS-232-With LED display+With monitoring function of downstream devices-With other analog output-With restart lock-With time function-OPTICAL FEATURESLight source Laser diode, red lightWavelength of the sensor650 nmLight exit AxialLight beam form PointSmall light beam diameter-Line scanner-Laser class Class 1OTHER FEATURESFeeding technology+For gloss queries+-Is line scan camera2ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │***********•www.ipf.deConnection Dimensional drawingInstallationDisposal Mounting / installation may only becarried out by a qualified electrician!Safety warningsBefore initial operation, please make sure to follow all safety instructions that may be provided in the product information.Never use these devices in applications where the safety of a person depends on their functionality.LED lighting systems can generate intensive UV radiation, which can damage your eyes in case of improper use. The manufacturer cannot be held responsible for damages that result from improper use or connection.ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │***********•www.ipf.de3。
lr-w500工作原理
LR-W500是一种被动式红外线传感器，用于侦测目标物体的热量辐射。
该传感器通过红外线传感技术来实现物体的侦测。
它的工作原理是基于物体辐射的热能转换成红外线辐射。
当物体的温度高于绝对零度时，会发出红外线辐射。
红外线在电磁波谱中属于可见光之外的频段，人眼无法直接感知。
但是红外线可以被红外线传感器检测到。
LR-W500传感器内部包含一个红外线探测器。
当物体发出红外线辐射时，传感器会接收到辐射并将其转换为电信号。
传感器会通过一系列的电子设备和算法处理电信号，以确定目标物体的位置和运动。
LR-W500的工作原理可以用于许多应用，例如安全系统、自动化控制和智能家居。
它可以检测人体、动物以及其他发出红外线辐射的物体，从而实现在没有光线的环境下的准确侦测和监测。
••••••••••••ISQ 5-LO双色、数字、固定式光纤型非接触测温仪，测温范围７００．．．２５００℃小目标测温，最小０．４５ｍｍ●宽泛的测温范围●激光瞄准模拟输出０－２０ｍＡ或４－２０ｍＡ数字接口ＲＳ２３２或ＲＳ４８５峰值存储功能光纤及光纤头可耐２５０Ｃ高温耐用光纤最长可用３０米●●●●●●ＩＳＱ５－ＬＯ是一款双色、数字、非接触的高精度光纤型红外测温仪。
ＩＳＱ５－ＬＯ采用双色技术，根据两个相邻的波段测得的能量的比值计算物体表面温度值。
双色相对单色而言具有如下优点：测试温度与被测物体发射率无关测温的过程在很大程度上不受辐射率的影响．测量目标可以小于最小光斑尺寸测量值不受视野范围内的灰尘及其他污物或污染的窗口的影响．此外这款测温仪也可以调整到单色测温模式，作为工作波长０．９ｕｍ普通测温仪使用．ＩＳＱ５－ＬＯ带有一根光纤和一个可更换的光纤头．光纤及光学镜头无需制冷即可在２５０℃的高温下使用，且测温时不受电磁干扰（比如感应加热）的影响．诸如坡度、响应时间、模拟输出等重要参数可直接在仪器上设置。
另外在联机情况下也可通过软件对仪器的参数做进一步调整．通过软件亦可实时显示并存储温度数据．典型应用感应加热回转炉窑退火锻造熔结焊接烧结轧钢浇铸在线 / 离线响应时间激光瞄准按键发射率坡度模拟输出 0 or 4 ... 20 mA 带色彩标识光缆电缆接头Technical Data细节说明可选: ISQ 5-LO-C, 集成PID控制器的特别版本ISQ 5-LO-C 配置 PID 控制器。
可自动控制和监视过程温度。
控制器将当前的测量温度与目标温度进行比较，计算控制信号并给出0或4至20 mA 的输出信号（非温度信号）。
控制器反应速度非常快，按照高温计响应时间（<10 ms ）更新信号。
控制器内置的自整定算法可以自动确定控制部分P ，I 和D 的近似值。
激活或关闭控制器并设定相应参数既可通过软件实现亦可通过 HT 6000便携式参数调整装置或者 DA 6000 和 DA 6000-N 型数显表实现测温范围:700 - 1800°C (MB 18) 800 - 2500°C (MB 25)子温度范围:测温范围内任意区间，最小跨度51°C工作波长: 波长 1: 0.7 ... 1.15 µm; 波长 2: 0.97 ... 1.15 µm 供电:24 V DC ± 25%, stabilised, ripple < 50 mV 最大负载: ≤3 VA (incl. active laser targeting light)模拟输出:0 - 20 mA 或 4 - 20 mA, 可切换, 线性输出。
