tp-link路由器使用说明书

TL-WR802N300Mbps Wireless N Nano RouterRev: 1.0.2COPYRIGHT & TRADEMARKSSpecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.FCC STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1）This device may not cause harmful interference.2）This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”CE Mark WarningThis is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.RF Exposure InformationThis device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.The device complies with RF specifications when the device used at 20 cm form your body.National restrictionsThis device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country Restriction Reason/remarkBelarus Not implementedNorway Implemented This subsection does not apply for the geographical areawithin a radius of 20 km from the centre of Ny-Ålesund onSvalbardItaly Implemented The public use is subject to general authorisation by therespective service providerRussian Federation Limitedimplementation1. SRD with FHSS modulation1.1. Maximum2.5 mW e.i.r.p.1.2. Maximum 100 mW e.i.r.p. Permitted for use SRD foroutdoor applications without restriction on installation heightonly for purposes of gathering telemetry information forautomated monitoring and resources accounting systems.Permitted to use SRD for other purposes for outdoorapplications only when the installation height is not exceeding10 m above the ground surface.1.3.Maximum 100 mW e.i.r.p. Indoor applications2. SRD with DSSS and other than FHSS widebandmodulation2.1. Maximum mean e.i.r.p. density is 2 mW/MHz. Maximum100 mW e.i.r.p.2.2. Maximum mean e.i.r.p. density is 20 mW/MHz. Maximum100 mW e.i.r.p. It is permitted to use SRD for outdoorapplications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems.2.3. Maximum mean e.i.r.p. density is 10 mW/MHz. Maximum 100 mW e.i.r.p. Indoor applicationsUkraine Limitedimplementation e.i.r.p. ≤100 mW with built-in antenna with amplification factor up to 6 dBiATTENTION: Due to EU law, the country settings must be identical to the country where the device is operating (important due to non-harmonised frequencies in the EU).Canadian Compliance StatementThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:1）This device may not cause interference, and2）This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :1）l’appareil ne doit pas produire de brouillage;2）l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Industry Canada StatementCAN ICES-3 (B)/NMB-3(B)Korea Warning Statements당해무선설비는운용중전파혼신가능성이있음.NCC Notice & BSMI Notice注意！依據低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。

前言：路由器和无线路由器虽然普及得很快，大伙用得也很方便，但还是有很多刚接触路由器的朋友，不懂得如何设置路由器，毕竟它不是跟非网管交换机一样，插上即可用。

而厂商一般都配有说明书，有些却不够简明，过于复杂，有些虽然提供了傻瓜化的安装向导，但在设置的定制化方面显然无法体现。

今天，我们就用最浅显易懂的图文并茂的方式表达出来，希望对菜鸟朋友们有点帮助。

1.将TP-LINK无线路由器通过有线方式连接好后，在IE输入192.168.1.1，用户名和密码默认为admin，确定之后进入以上设置界面。

打开界面以后通常都会弹出一个设置向导的小页面，如果有一定经验的用户都会勾上“下次登录不再自动弹出向导”来直接进行其它各项细致的设置。

不过本人建议一般普通用户按下一步进行简单的向导设置，方便简单。

点击下一步来进行简单的安装设置。

2.通常ASDL拨号上网用户选择第一项PPPoE来进行下一步设置。

但是如果你是局域网内或者通过其它特殊网络连接（如视讯宽带、通过其它电脑上网之类）可以选择以下两项“以太网宽带”来进行下一步设置。

这里先说明一下ADSL拨号上网设置，以下两项在后面都将会进行说明。

到ADSL拨号上网的帐号和口令输入界面，按照字面的提示输入用户在网络服务提供商所提供的上网帐号和密码然后直接按下一步。

3.接下来可以看到有无线状态、SSID、频段、模式这四项参数。

检测不到无线信号的用户留意一下自己的路由器无线状态是否开启。

SSID这一项用户可以根据自己的爱好来修改添加，这一项只是在无线连接的时候搜索连接设备后可以容易分别需要连接设备的识别名称而已。

另外在频段这一项我们拉下来可以看到有13个数字选择，这里的设置只是你路由的无线信号频段，如果你附近有多台无线路由的话你可以在这里设置使用其它频段来避免一些无线连接上的冲突。

接着模式这一选项拉下来我们可以看到TP-LINK无线路由的几个基本无线连接工作模式，11Mbps（802.11b）最大工作速率为11Mbps；54Mbps（802.11g）最大工作速率为54Mbps，也向下兼容11Mbps。

AC13503G/4G Wireless Dual Band RouterEnjoy 3G/4G Sharing withPower ful AC1350 Wi-Fi SpeedMU-MIMO T echnology for 2× Faster Performance450Mbps + 867Mbps Dual Band Wi-Fi3G/4G SharingEnsured Internet AccessWith both 3G/4G and WAN connectivity, the TL-MR3620 always keeps you online. Take advantage of flexibility when choosing and setting up your network, and share a 3G/4G mobile broadband connection through wired orwireless connections.Beamforming technology detects the location of your connected devices and concentrates the TL-MR3620's Wi-Fi towards them to create stronger overall connections.Beamforming for Better Coverage MU-MIMO technology allows the TL-MR3620 to serve 2 devices at once,reducing wait time and increasing Wi-Fi throughput.MU-MIMO Router Simultaneously sends data to multiple devicesTraditional RouterSends data to one device at a time Regular RouterTL-MR3620· Ultimate Wireless Speed – Combined wireless speeds up to 450 (over 2.4GHz) and 867 (over 5GHz) Mbps· MU-MIMO Technology – Simultaneously exchanges data with several devices, achieving speeds which are 2x faster than standard AC routers· Support 802.11 ac – Provides a data transfer rate 3 times faster than 802.11n for each stream· Ultimate Range Wi-Fi – 3 dual band high-performance antennas with a high-powered amplifier ensure the widespread Wi-Ficoverage and a stable connection· Wi-Fi with Beamforming – Beamforming technology locates the connected devices and further improves the TL-MR3620’srange and the signal strength to each mobile device, delivering a more reliable and efficient wireless connection SpeedWi-Fi RangeReliability· Simultaneous Dual Band – Separate Wi-Fi bands enable moredevices to connect to your network without a drop in performance · Easy Bandwidth Management – IP-based Bandwidth Control makes it easier for you to manage the bandwidth of connected devices· Intuitive Web UI – Ensures quick and simple Installation without hassle· Fast Encryption – One-touch WPA wireless security encryption with the WPS button· Wi-Fi On/Off – Turn on/off wireless radio as needed using the Wi-Fi On/Off button· Power On/Off – Conveniently power on or off your router as required· Hassle-free Management with Tether App – Network management is made easy with the TP-Link Tether App, available on any Android and iOS device· Guest Network – Keep your main network secure by creating a separate network for friends and visitors· Access Control – Establish a whitelist or blacklist to allow or restrict certain devices to access the internet· Parental Controls – Restrict internet access time and contents for children devices· VPN Server – IPSec VPN makes it easy to set up a secure connection between your private network and the internet · Encryptions for Secure Network – WPA-PSK and WPA2-PSK encryptions provide active protection against security threatsEase of UseSecurity· USB Port for Fast Sharing – With the USB port, you can access and share a printer as well as your files and media locally.Through the router's FTP server, you can also access your files and media from network devices remotely· Built-in Print Server – Allows wireless printing from multiple computers (works in conjunction with a USB printer)· Built-in Media Server – Allows you to play music, watch videos and view photos from any device on your networkEasy SharingHardware· Ethernet Ports: 4 10/100Mbps LAN Ports, 1 10/100Mbps WAN Port · USB Ports: 1 USB 2.0 Port· Buttons: Wi-Fi Button, Power On/Off Button, Reset Button, WPS Button · Antennas: 3 Fixed Omni Directional Antennas · External Power Supply: 12VDC/1A· Dimensions (W x D x H): 8.9 × 5.8 × 1.3 in (225 × 148 × 33 mm)Wireless· Wireless Standards: IEEE 802.11ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz · Frequency: 2.4GHz and 5GHz· Signal Rate: 867Mbps at 5GHz, 450Mbps at 2.4GHz · Transmit Power:CE: <20dBm (2.4GHz), <23dBm (5GHz)FCC: <30dBm (2.4GHz & 5GHz)· Reception Sensitivity: 5GHz:11a 6Mbps: -94dBm, 11a 54Mbps: -76dBm 11ac HT20: -68dBm, 11ac HT40: -64dBm, 11ac HT80: -60dBm2.4GHz:11g 54M: -77dBm, 11n HT20: -73dBm, 11ac HT40: -71dBm· Wireless Function: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics· Wireless Security: Enable/Disable SSID Broadcast, 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA-PSK2 encryptions, WPSInternet AccessReset WPSUSB port Power On/Off· Certification:CE, RoHS· System Requirements:Microsoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS, NetWare, UNIX or LinuxInternet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser Cable or DSL ModemSubscription with an internet service provider (for internet access)· Environment:Operating Temperature: 0℃~40℃ (32℉ ~104℉)Storage Temperature: -40℃~70℃ (-40℉ ~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing· Package Contents AC1350 3G/4G Wireless Dual Band Router TL-MR3620Power AdapterRJ45 Ethernet CableQuick Installation GuideOthersSoftware· Operation Mode: 3G/4G Router Mode, 3G/4G Router Mode with Ewan Backup, Wireless Router Mode, Wireless Router Mode with 3G/4G Backup · Quality of Service: WMM, Bandwidth Control· WAN Type: Dynamic IP, Static IP, PPPoE, PPTP(Dual Access), L2TP(Dual Access)· Management: Access Control, Local Management, Remote Management · DHCP: Server, DHCP Client List, Address Reservation · Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ · Dynamic DNS: DynDns, NO-IP · VPN Server: IPSec VPN· Access Control: Parental Control, Local Management Control, Blacklist, Whitelist · Firewall Security: DoS, SPI Firewall, IP and MAC Address Binding · Protocols: IPv4, IPv6 Tunel· USB Sharing: Supports Samba(Storage), FTP Server, Media Server, Printer Server · Guest Network: 2.4GHz guest network x 1, 5GHz guest network x 1For technical support, please visit: /supportAttention: This device may only be used indoors in all EU member states and EFTA countries.Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Copyright ©2017 TP-Link Technologies Co., Ltd. All rights reserved.TP-Link Technologies Co., Ltd.Building 24 (floors 1, 3, 4, 5) and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China For more information, please visit /en/products/details/TL-MR3620.htmlor scan the QR code left。

tp-link9600路由器说明书1.将TP-LINK无线路由器通过有线方式连接好后，在IE输入192.168.1.1，用户名和密码默认为admin，确定之后进入以上设置界面。

打开界面以后通常都会弹出一个设置向导的小页面，如果有一定经验的用户都会勾上“下次登录不再自动弹出向导”来直接进行其它各项细致的设置。

不过本人建议一般普通用户按下一步进行简单的向导设置，方便简单。

点击下一步来进行简单的安装设置。

2.通常ASDL拨号上网用户选择第一项PPPoE来进行下一步设置。

但是如果你是局域网内或者通过其它特殊网络连接（如视讯宽带、通过其它电脑上网之类）可以选择以下两项“以太网宽带”来进行下一步设置。

这里先说明一下ADSL拨号上网设置，以下两项在后面都将会进行说明。

到ADSL拨号上网的帐号和口令输入界面，按照字面的提示输入用户在网络服务提供商所提供的上网帐号和密码然后直接按下一步。

3.接下来可以看到有无线状态、SSID、频段、模式这四项参数。

检测不到无线信号的用户留意一下自己的路由器无线状态是否开启。

SSID这一项用户可以根据自己的爱好来修改添加，这一项只是在无线连接的时候搜索连接设备后可以容易分别需要连接设备的识别名称而已。

另外在频段这一项我们拉下来可以看到有13个数字选择，这里的设置只是你路由的无线信号频段，如果你附近有多台无线路由的话你可以在这里设置使用其它频段来避免一些无线连接上的冲突。

接着模式这一选项拉下来我们可以看到TP-LINK无线路由的几个基本无线连接工作模式，11Mbps（802.11b）最大工作速率为11Mbps；54Mbps（802.11g）最大工作速率为54Mbps，也向下兼容11Mbps。

（在TP-LINK无线路由产品里还有一些速展系列独有的108Mbps工作模式）。

4.接下来的高级设置我会简单的介绍一下每个设置选项的页面和设置参数。

首先这里是第一个选项运行状态。

刚才我们对TP-LINK无线路由的设置都反映在上面，如果你是ADSL拨号上网用户你在这里的页面按连接就可以直接连上网络，如果你是以太网宽带用户则通过动态IP或固定IP连接上网，这里也会出现相应的信息。

手机、平板电脑和笔记本使用无线无法上网怎么办？请确认您的设备无线功能处于正常状态，如无线开关已经打开、可以搜索到无线信号。

请确认无线路由器设置正确，无线名称请不要使用中文或者特殊字符。

请确认进行无线连接时，选择的无线名称和填写的无线密码正确（注意区分大小写）。

1.雷雨天气请将路由器电源及所有连线拆除，以免遭雷击破坏。

2.远离热源，保持通风。

3.在储存、运输和运行环境中，请注意防水。

4.使用路由器附带的电源适配器。

5.将设备放置在平稳的表面。

警告未经普联技术有限公司明确书面许可，任何单位或个人不得擅自仿制、复制、誊抄或转译本手册部分或全部内容，且不得以营利为目的进行任何方式（电子、影印、录制等）的传播。

声明Copyright © 2021 普联技术有限公司版权所有，保留所有权利。

为普联技术有限公司注册商标。

本手册提及的所有商标，由各自所有人拥有。

本手册所提到的产品规格和资讯仅供参考，如有内容更新，恕不另行通知。

除非有特殊约定，本手册仅作为使用指导，所作陈述均不构成任何形式的担保。

地址：深圳市南山区深南路科技园工业厂房24栋南段1层、3-5层、28栋北段1-4层公 司 网 址：技术支持热线：400-8863-400产品保修卡一、下列情况不属于免费维修范围，普联技术有限公司可提供有偿服务，敬请注意：已经超出保换、保修期限；未按使用说明书要求安装、使用、维护、保管导致的产品故障或损坏；擅自涂改、撕毁产品条形码；未经普联技术有限公司许可，擅自改动本身固有的设置文件或擅自拆机修理；意外因素或人为行为导致产品损坏，如输入不合适电压、高温、进水、机械破坏、摔坏、产品严重氧化或生锈等；客户发回返修途中由于运输、装卸所导致的损坏；因不可抗拒力如地震、火灾、水灾、雷击等导致的产品故障或损坏；其他非产品本身设计、技术、制造、质量等问题而导致的故障或损坏。

特别说明:在您送修产品之前，请致电我公司技术支持热线：400-8863-400，以确认产品故障。

路由器怎么设置TP-LINK路由器设置方法在互联网的时代，我们离不开无线网络。

而要使用无线网络，我们就需要设置路由器。

TP-LINK是一家知名的网络设备制造商，其路由器产品在市场上非常受欢迎。

本文将详细介绍如何设置TP-LINK路由器的方法，帮助读者轻松完成路由器的配置。

一、连接路由器在开始设置TP-LINK路由器之前，首先要确保连接正确。

请按照以下步骤进行操作：1. 将TP-LINK路由器与宽带调制解调器（ADSL/Cable Modem）通过一根以太网线连接。

2. 打开电源，确保路由器和调制解调器都已成功启动。

3. 在电脑上打开一个网页浏览器，输入路由器的默认IP地址。

一般来说，TP-LINK路由器的默认IP地址是192.168.0.1或192.168.1.1。

如果不确定，默认IP地址可以在路由器的说明书中找到。

4. 输入默认IP地址后，按下回车键，浏览器将会进入路由器的设置页面。

二、登录路由器在连接路由器成功后，下一步是登录路由器进行设置。

请按照以下步骤进行操作：1. 在路由器的设置页面，会要求输入用户名和密码。

默认情况下，TP-LINK路由器的用户名和密码都是"admin"。

输入后，点击登录按钮进入路由器的管理界面。

2. 如果忘记了用户名和密码，可以在路由器的说明书中找到恢复出厂设置的方法。

请注意，恢复出厂设置将会清除所有之前的设置，包括无线网络名称和密码等。

三、进行基本设置进入路由器的管理界面后，我们需要进行一些基本设置。

以下是一些常见的设置项目：1. 网络设置：在这里可以设置路由器的局域网IP地址以及子网掩码。

一般情况下，使用默认设置即可。

2. 密码设置：为了保护路由器的安全，可以在这里修改登录密码。

请设置一个强密码，并妥善保存。

3. 无线设置：在这里可以设置无线网络的名称（SSID）和密码。

建议选择一个独特的名称，以便于区分其他无线网络。

4. DHCP设置：DHCP（动态主机配置协议）可以自动为连接到路由器的设备分配IP地址。

确认指示灯的点灯状态。

连接设备。

接通终端装置与本产品的电源。

设置指南INTERNET:点灯或闪烁说明本产品的概要及规格、使用时的注意事项。

并且刊载了 FAQ，说明动作不正常等为难时的对策。

横放时竖立时•将有LED 指示灯的一侧朝向前方。

•参考插图，将本体后方完全放进附带的支座的槽中。

•将有LED 指示灯的一侧朝向上面。

•将本体放在附带的支座的中间后方，避免本体晃动。

• 确认调制解调器等的指示灯以及本产品的指示灯已正确点灯。

参考插图，连接各设备的配线。

连接终端装置的电源电缆。

有电源开关时，将开关置于接通状态。

连接将本产品附带的交流适配器。

交流适配器■各部分的名称和作用左侧面图■以路由器模式使用本产品时背面图背面图背面图背面图•无论是横放，还是竖放，都请设置在通风良好的位置，不要放入墙面和架子之间。

•请不要与调制解调器、终端装置等网络设备叠放在一起。

•支座未被固定在本体上。

在将电缆类连接在本体上后，请设置在支座上。

※ 请务必遵守如下设置方法，正确使用。

在本产品工作的状态跌落，或者拔出电缆类，会导致故障、数据丢失，为确保其稳定，请务必将本体设置在附带的支座上，并采取防止跌落和拔出的措施。

POWER 指示灯(白色)WPS 指示灯(红色)2.4GWLAN 指示灯(白色)5GWLAN 指示灯(白色)WPS 设定按钮Reset 按钮INTERNET 端口 /INTERNET 指示灯(白色)支座LAN 端口 /LAN 指示灯 1 ～ 4 (白色)DC IN(电源插孔)闪烁: 表示处于按下WPS 设定按钮，正在执行WPS 功能的状态。

以0.5秒的间隔大约闪烁2分钟。

熄灯: 表示没有执行WPS 功能的状态。

与配置WPS 功能的无线子机 (无线LAN 适配器等) 连接时使用。

使用时，按2秒以上。

如果连续按该按钮超过10秒钟，WPS 指示灯闪烁，本产品的设定值被初始化 (返回出厂状态)。

在WPS 指示灯闪烁期间，请不要切断电源。

300Mbps Wireless N 4G LTE RouterShare 4G LTE Internet with Reliable Wi-Fi4G(TDD&FDD)/3G/2G Compatible 300MbpsWireless SpeedLTE Antennas forBetter PerformanceAdvanced LTE antennas make efficient and stable connections to everydevice. Power Amplifier and Low Noise Amplifier boost sending and receivingcapabilities, creating a wide-coverage Wi-Fi network for your home.Design for Maximum Network CoverageIdeal Use PlacesRemoteAreasOutdoorsActivitiesBusinessMeetings300Mbps 2.4GHz4G LTE150Mbps50Mbps 2.4GHz 300MbpsTL-MR6400Simply insert your 3G/4G SIM card into the built-in slot, turn on the TL-MR6400 and start surfing!With a fully functional WAN/LAN port, enjoy a variety of backup connection types, including cable, fiber, and DSL modems.Plug and Play with a SIM CardAvailable WAN Connection BackupSIM CardModem· 4G LTE – Supports 4G LTE network, compatible with 3G/2G network· Faster Connections – Up to 150Mbps download speed and 50Mbps upload for uninterrupted HD movies, rapid file downloads and video chats that won't freeze up · 300Mbps Wireless Speed – 300Mbps Wi-Fi allows stable speed for wireless activities, such as streaming, surfing, browsing and posting social media4G LTE SpeedWi-Fi Range· Better Coverage – Integrated antennas provide stable wireless connections and better coverage· No Configuration – Simply insert your SIM card into the built-inslot and turn on the router · Available LAN/WAN port – Allows you to connect to any standard cable, fiber, or DSL modems· Fast Encryption – Easily set up an encrypted wireless connection at a push of the WPS button· Wi-Fi On/Off – Turn On/Off wireless radio using the Wi-Fi buttonEase of Use· Guest Network – Keep your main network secure by creating a separate network for friends and visitors· Parental Control – Manage when and how connected devices can access the internet· Bandwidth Control – Makes it easier for you to manage the bandwidth of connected devices· Encryptions for Secure Network – WPA-PSK/WPA2-PSKencryptions provide active protection against security threatsSecurityReliability · IP QoS – Advanced QoS automatically prioritizes streaming and gaming applicationsHardware· Ports: 3 10/100Mbps LAN ports, 1 10/100Mbps LAN/WAN Port , 1 SIM Card Slot· Button: WPS/RESET Button, WiFi ON/OFF Button, POWER ON/OFF Button · Antenna: 2 × Internal Wi-Fi Antennas, 2 × Detachable External 4G LTE Antennas· External Power Supply: 12V/1A· Dimensions (W x D x H): 7.95 × 5.55 × 1.32 in. (202 × 141 × 33.6 mm)Wireless· Network Type:4G: FDD-LTE Cat4 (800/900/1800/2100/2600MHz), TDD-LTE (1900/2300/2500/2600MHz)3G: DC-HSPA+/HSPA+/HSPA/UMTS (900/2100MHz) 2G: EDGE/GPRS/GSM (850/900/1800/1900MHz)· Wireless Standards: IEEE 802.11b, 802.11g, 802.11n · Frequency: 2.4GHz· Signal Rate: 300Mbps at 2.4GHz· Transmit Power: CE: <20dBm (2.4GHz)· Reception Sensitivity: 11g 54M: -74dBm 11n HT20: -71dBm 11n HT40: -67dBm· Wireless Function: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics· Wireless Security: Supports 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions, Wireless MAC FilteringPOWERWiFi ON/OFFWPS/RESET LAN/WAN PortLANPorts SIM CardSlotPOWER· Certification: CE, RoHS · System Requirements:Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, MAC OS, NetWare, UNIX or LinuxInternet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0 browers or higher, or other Java-enabled browsers SIM Card · EnvironmentOperating Temperature: 0℃~40℃ (32℉ ~104℉) Storage Temperature: -40℃~70℃ (-40℉ ~158℉)Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing · Package Contents300Mbps Wireless N 4G LTE Router TL-MR6400 Power Adapter RJ45 Ethernet Cable Quick Installation GuideMicro-to-Standard SIM Card AdapterNano-to-Standard SIM Card AdapterOthersSoftware· Operation Modes: 3G/4G Router, Wireless Router· WAN Type: Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)· DHCP: Server, Client, DHCP Client List, Address Reservation · Quality of Service: Traffic Control (IP QoS)· Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ · Dynamic DNS: DynDns, NO-IP · VPN Passthrough: PPTP, L2TP, IPSec· Access Control: Parental Control, Local Management Control, Host List, Access Schedule, Rule Management· Firewall Security: DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding · Protocols: IPv4, IPv6· Management: Access Control, Local Management, Remote Management · Guest Network: 2.4GHz guest networkSpecifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Copyright ©2017 TP-Link Technologies Co., Ltd. All rights reserved.* Attention: This device may only be used indoors in all EU member states and EFTA countries.* Maximum wireless speed of up to 300Mbps is the theoretical data rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary due to network conditions and environmental factors including volume of network traffic, building materials and construction, network overhead, actual data throughput rate, and wireless coverage. TP-LINK makes no express or implied representations or warranties about this product’s compatibility with any future standards.For more information, please visit /en/products/details/?model=TD-MR6400or scan the QR code left。