______________________________________________________________xxµxx
Evaluates: MAX4447/MAX4448/MAX444919-1584; Rev 0; 10/99
__________________________
_______________________________________________
MAX2104CCM
Rev. A
RELIABILITY REPORT
FOR
MAX2104CCM
PLASTIC ENCAPSULATED DEVICES
January 28, 2001
MAXIM INTEGRATED PRODUCTS
120 SAN GABRIEL DR.
SUNNYVALE, CA 94086
Written by Reviewed by
Jim Pedicord Bryan J. Preeshl
Quality Assurance Quality Assurance
Reliability Lab Manager Executive Director
Conclusion
The MAX2104 Successfully meets the quality and reliability standards required of all Maxim products. In addition,
Maxim’s continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality
and reliability standards.
Table of Contents
I. ........Device Description V. ........Quality Assurance Information
II. ........Manufacturing Information VI. .......Reliability Evaluation
III. .......Packaging Information
IV. .......Die Information ......Attachments
For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at
1-888-629-4642, or visit Maxim’s website at .General Description
The MAX481, MAX483, MAX485, MAX487–MAX491, and
MAX1487 are low-power transceivers for RS-485 and RS-
422 communication. Each part contains one driver and one
receiver. The MAX483, MAX487, MAX488, and MAX489
feature reduced slew-rate drivers that minimize EMI and
reduce reflections caused by improperly terminated cables,
thus allowing error-free data transmission up to 250kbps.
The driver slew rates of the MAX481, MAX485, MAX490,
MAX491, and MAX1487 are not limited, allowing them to
transmit up to 2.5Mbps.
These transceivers draw between 120µA and 500µA of
supply current when unloaded or fully loaded with disabled
drivers. Additionally, the MAX481, MAX483, and MAX487
General DescriptionThe MAX17075 includes a high-voltage boost regulator,one high-current operational amplifier, two regulatedcharge pumps, and one MLG block for gate-driver supply modulation.The step-up DC-DC converter is a 1.2MHz current-mode boost regulator with a built-in power MOSFET. Itprovides fast load-transient response to pulsed loadswhile producing efficiencies over 85%. The built-in160mΩ(typ) power MOSFET allows output voltages ashigh as 18V boosted from inputs ranging from 2.5V to5.5V. A built-in 7-bit digital soft-start function controlsstartup inrush currents.The gate-on and gate-off charge pumps provide regu-lated TFT gate-on and gate-off supplies. Both outputvoltages can be adjusted with external resistive voltage-dividers.The operational amplifier, typically used to drive theLCD backplane (VCOM), features high-output short-cir-cuit current (±500mA), fast slew-rate (45V/µs), widebandwidth (20MHz), and rail-to-rail outputs.The MAX17075 is available in a 24-pin thin QFN pack-age with 0.5mm lead spacing. The package is a square(4mm x 4mm) with a maximum thickness of 0.8mm forultra-thin LCD design. It operates over the -40°C to+85°C temperature range.ApplicationsNotebook Computer DisplaysLCD Monitor Panels
