服装检验报告中英文电子版

INSPECTION REPORTItem Description 品类Check count 尾期次数Buyer 客户AQLFactory 工厂Estimated Dlvy Date 预估交期Laundry 水洗厂Dlvy Date 交期Color 水洗方式Date Of Inspection 查货日期A/C Merchandiser 业务Def. qty.疵点数Found 实际Model No./Style No. 款号Allowed 允许值Order No. 制单号Size 尺码CONCLUSION:The inspection results of the above mentioned merchandise are found as follows:Quantity 数量Conform接受Not Conform不接受Pending待复Workmanship 做工Conform接受Not Conform不接受Pending待复Washing/Style 水洗,款式Conform接受Not Conform不接受Pending待复Hand feel 手感Conform接受Not Conform不接受Pending待复Packing 包装规格Conform接受Not Conform不接受Pending待复labeling/trim 挂牌,辅料Conform接受Not Conform不接受Pending待复Measurement 尺寸Conform接受Not Conform不接受Pending待复OVERALL INSPECTION RESULT:Conform通过Not conform不通过Pending待复EXECUTIVE COMMENTS备注:TOP SAMPLE STATUS 船样: Sent寄出Not yet （Shipment under L/G）未寄出（需批准或担保出货）INSPECTION METHOD APPLIED:Inspection method: Double Sampling Plan, Normal Severity Level (IIIA)Acceptable Quality Level (AQL) for: Critical: N/A Major: 2.5 Minor: 4.0Sample size inspected检查数量: ( pcs from packed cartons箱子里取得数量; pcs from not packed products未装箱中取的数量)Samples selected from carton numbers抽查箱号:TTL总查箱数: CTNS 1.QUANTITY 数量Style NO款号P.O. Order Qty订单数量Lot size 实有数量Carton Qty. 总箱数Packed已包装Unpacked未包装Packed已装箱Unpacked未装箱Total总计:2.WORKMANSHIP 做工:Defect description 疵点类型Major 严重Minor 轻微Total总计:Max. allowed 可接受的最大值:3. PRODUCT DESCRIPTION(STYLE, HANDFEEL AND WASHING EFFECT) 款式，手感，水洗 3.1 Style conformity: Are inspected samples similar to ref.sample?实际产品是否与标样款式一致？ 3.2 Hand feel conformity: Do inspected samples have the same hand feel as the ref.sample?手感以否与标样一样？ 3.3 Washing conformity: Do inspected samples have the same washing effect as the ref.wash sample?水洗效果是否与标样一致？ Notes 备注: 4 PACKING SPECIFICATIONS 包装规格 4.1 Carton dimensions 纸箱大小(长X 宽X 高):Actual 实际: L W x H x cm;Printed on carton 箱唛所印规格: L W x H x cm 4.2 Gross weight of carton 箱子毛重:Actual 实际: kg Printed on carton 箱唛标重: kg4.3 Packing assortment 装箱配比: 5 LABELING , TRIM AND OTHERS 挂牌，辅料及其他细节 Main Label 主唛 Thread Color 线色 Master Carton 纸箱 Shipping Mark 箱唛 Care Label 洗水唛 Leather Patch 皮牌 Embroidery 绣花 Pocketing 袋布 Labels Position 商标位置 Zipper 拉链 Poly bag 胶袋 Folding Method 折法 Tags 挂卡/腰卡 Rivet 撞钉 Plastic pin 枪针 Odor 是否有异味 Tags Position 挂卡位置 Snap/Shank 钮扣 Barcode 条形码 Dry or not 成品是否干 6 MEASUREMENT 尺寸Size measurement conformity check carried out upon sub-samples. 量衣总件数 And found:conform 通过not conform 不通过For details please refer to measurement chart.Notes 备注:Inspected by: 查货QC 签字Confirmed by: 工厂签字Approved by: QC 经理签字Full acceptance over actual findingsYes 是 No 不是 Yes 是 No 不是 Yes 是 No 不是。

Pre-shipment Inspection Report Service Number: Summary SectionProductNameTrolley BagItemnumberN/AP/OnumberN/AQuantity 1185 piecesClientname。

Suppliername。

Inspectiondate2008-10-18Arrivaltime09:30Departuretime18:00Inspection location QUANZHOU,FUJIAN, ChinaInspector David WangNingbo IntegrityINT’LSERVICE CO.,LTDCategory Conform CommentQuantity YesProduct description / style / color No please refer to special attention Point #1, #2,Workmanship NoTesting/ checking YesData measurement YesPackaging YesShipping mark YesInspection Standard: ANSI/ASQZ1.4 (MIL-STD-105E) DEFECTSCritical Major Minor Sampling plan: Single, Normal AQL 0.0 2.5 4.0Inspection Level: II Defects Found: 0 9 13QuantityProduct description / style / colorspecificationCheck against sample submitted by client:Discrepancy was found on inspection samples, please refer to Special Attention point # 1 & #2.WorkmanshipDefectives ListDefectivesListDefectivesCRI MAJ MIN PictureDescription0 0 8Wrinkle markon fabricDirty stains 0 0 5DefectivesListDefectives ListDefectivesDescriptionCRI MAJ MIN PictureHandle standslant ( can beused)0 9 0TESTING /CHECKINGFunction test on handle, wheel, zip and Velcro.Performed on all seletced samples, the result was passed.Function checking for Velcro tape/zip Performed all selected samples, the result was acceptablePull test at handle strap by hand normal force Performed on S-3 samples, the result was passed.Adhesive test by tapes Performed on S-3 samples, Noprinting peel off, the result waspassedSize measure performed on 5 pcs samples,result is below measurement table.Internal Check performed on 5 pcs samples,Discrepancy was found oninspection samples, please refer toSpecial Attention point # 1 & # 2.(Page 2).Mass productions Approved sampleGap locationCarton Drop Test from 76cmheight, drop 10 times at 1 corner, 3edges and 6 faces.Performed on 3 cartons, the resultwas passedDATA MEASUREMENTSize MeasurementItems Spec.(cm)Samples1 2 3 4 5Product size (L * W * H) N/A 36 * 26.5* 4036 * 26.5* 4036 * 26.5* 4036 * 26.5* 4036 * 26.5* 40Side pocket23*25 23*24.5 23*24.5 23*24.5 23*24.5 23*24.5 Logo printing(L * W)N/A 11 * 2.6 11 * 2.6 11 * 2.6 11 * 2.6 11 * 2.6PE boardthickness onbottom and backpart4.0mm 4.0mm 4.0mm 4.0mm 4.0mm 4.0mmPE boardthickness around3 sides3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mmGross Weight ofexport cartonN/A 5.0 KGS 5.1 KGS 5.2 KGS 5.0 KGS 5.0 KGSSize of Export carton N/A 39 * 32 *44cm39 * 32 *44cm39 * 32 *44cm39 * 32 *44cm39 * 32 *44cmPackagingUnit packingEach product was packed into anindividual poly bag ,sealed onopeningOuter packing Carton size: 39 * 32 * 44cm1 pc with an instruction sheet packed ina carton which fixed by 1 nylon strap.Shipping markShipping MarkFront mark Side markOther markingBar code label on CartonPrinting logo on bag Other PicturesSewn label Sewn label (back)Instruction sheet Bottom viewString on zipper puller Compare with approved sample (rightside one)CartonsTotal cartons Inspected cartons。