小米12Ultra用户手册

Mi 9T User GuideVolumeBu onsPowerBu onsPop-up Selfie CameraThank you for choosing Mi 9TLong press the power bu on to turn on the device.Follow the on-screen instructions to configure the device.For more informationVisit our official website: .MIUIMi 9T comes pre-installed with MIUI, our customised Android-based OS which pushes frequent updates and user-friendly features suggested by over 200 million active users worldwide. For more information, please visit .SIM Card Tray:Nano-SIMNano-SIMAbout Dual SIM:Dual 4G SIM requires the support of local telecom operator services, and may not be available in all regions.Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.Only certain regions and telecom operators support VoLTE.System updates may be applied when network optimization occurs. For details, please refer to the system version in use on the device.Correctly dispose of this product. This marking indicates that this productshould not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources.To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.For Environment Declaration, please refer to the link below:h p:///en/about/environment/CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.To prevent possible hearing damage,do not listen at high volume levels for long periods.For more important safety information, please refer to User Manual in the link below:h p:///en/certification/Important safety informationRead all the safety information below before using your device.Using unauthorized cables, power adapters, or ba eries can cause fire, explosion, or pose other risks.Use only authorized accessories which are compatible with your device.This device’s operating temperature range is 0 °C~40 °C. Using this device in the environments outside of this temperature range may damage the device.If your device is provided with a built-in ba ery, don’t a empt to replace the ba ery yourself to avoid damaging the ba ery or the device.Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.A er charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours.The ba ery must be recycled or disposed of separately from household waste. Mishandling the ba ery may cause fire or explosion. Dispose of or recycle the device, its ba ery and accessories according to the local regulations.Do not disassemble, hit, crush, or burn the ba ery. In case of deformation, stop using the ba ery immediately.- Do not short circuit the ba ery to avoid overheating, burns, or other personal injuries. - Do not place the ba ery in the high-temperature environments. Overheating may cause explosion.- Do not disassemble, hit, or crush the ba ery to avoid ba ery leaks, overheating, or explosion.- Do not burn the ba ery to avoid fire or explosion.- In case of deformation, stop using the ba ery immediately.Keep your device dry.Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.Safety precautionsObserve any law and rule which restricts using mobile phones in specific cases and environments.Do not use your phone in petrol stations and explosive atmospheres and potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders.Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and health centers. Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. To avoid potential interference with the pacemaker, maintain a separation of 15cm between the mobile phone and the pacemaker. To achieve this, use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoid interference with medical equipment.Respect aircra safety regulations and turn off your phone on board the aircra when required.When driving a vehicle, use your phone in accordance with the relevant traffic laws and regulations.To avoid lightning strike, do not use your phone outdoors during thunderstorms.Do not use your phone to make calls while it is charging.Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.Security noticeUpdate your phone’s operating system using the built-in so ware update feature, or visit our authorized service outlets. Updating so ware through other means may damage the device or result in data loss, security issues, and other risks.EU RegulationsRED Declaration of ConformityHereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1903F10G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity could be consulted at/en/certificationRF Exposure Information (SAR)This device is compliance with Specific Absorption Rate (SAR) for generalpopulation/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit:2.0W/kg) specified in Council Recommendation 1999/519/EC, and ICNIRP Guidelines, and RED (Directive 2014/53/EU).During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 5 mm. SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. Carry this device at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 5 mm between this device and our body. RF exposure compliance with any body accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided.Legal InformationThis device may be operated in all member states of the EU Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in 5150 to 5350Mhz frequency range in following countries:Receiver Category 2Ensure the power adapter used meets the requirements of Clause 2.5 inIEC60950-1/EN60950-1 and has been tested and approved according to national or local standards.Frequency Bands and PowerThis mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:GSM 900: 35 dBmGSM 1800: 32 dBmUMTS band 1/8: 25 dBmLTE band 1/3/7/8/20/28/38/40: 25.7 dBmBluetooth: 20 dBmWi-Fi 2.4 GHz band: 20 dBmWi-Fi 5 GHz: 5150~5350MHz: 20dBm, 5470~5725MHz: 20dBm,5725~5825MHz: 14dBmNFC: 13.56Mhz < -10.59 dBuA/m at 10mFCC RegulationsThis mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installationi. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.RF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on.FCC NoteChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.E-labelThis device has an electronic label for certification information.To access it, please select Se ings > About Phone > Certification or select Se ings, then type “Certification ”into the search bar.Certification Information (Highest SAR)SAR 10g limit: 2.0W/Kg, SAR Value: Head: 1.341 W/Kg,Body: 1.511 W/Kg (5mm distance).SAR 1g limit: 1.6W/Kg, SAR Value: Head: 1.19 W/Kg,Body-worn: 0.98 W/Kg (15mm distance).Hotspot: 1.18 W/Kg (10mm distance).Model: M1903F10G1903 indicates the product will be launched a er March, 2019DisclaimerThis User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this User Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new editions of this User Guide. All illustrations are for illustration purposes only and may not accurately depict the actual device.。

小米用户手册使用技巧随着科技的不断发展，智能手机已经成为人们生活中不可或缺的一部分。

作为一款备受欢迎的智能手机品牌，小米不仅在性能和设计上具备出色的表现，而且其用户手册也提供了许多有用的使用技巧。

本文将为您介绍一些小米用户手册中的使用技巧，帮助您更好地使用小米手机。

一、快捷操作技巧1. 快速截屏：在小米手机上，您可以同时按住音量减和电源键，即可快速截屏。

截屏后，您可以在通知栏中找到截屏预览，并进行编辑和分享。

2. 快速拍照：在相机应用中，您可以使用音量键来快速拍照。

这样，您可以更方便地拍摄照片，不用担心手指遮挡镜头。

3. 快速开启手电筒：在锁屏状态下，您可以双击电源键来快速开启手电筒。

这个功能非常实用，尤其在夜间或紧急情况下。

4. 快速切换应用：在小米手机上，您可以使用三指上滑的手势来快速切换应用。

这个手势可以帮助您更高效地进行多任务处理。

二、系统设置技巧1. 快速设置：在小米手机上，您可以下拉通知栏，然后点击右上角的齿轮图标，进入快速设置页面。

在这里，您可以快速开启或关闭各种功能，如Wi-Fi、蓝牙、定位等。

2. 主题设置：小米手机提供了丰富的主题选择，您可以根据个人喜好进行更换。

在主题设置中，您可以选择不同的壁纸、图标和字体，让您的手机界面更加个性化。

3. 节电模式：为了延长电池寿命，小米手机提供了节电模式。

您可以在设置中找到“电池与性能”选项，然后开启节电模式。

在节电模式下，手机会自动降低性能和亮度，以减少能耗。

4. 定时开关机：在小米手机上，您可以在设置中找到“定时开关机”选项。

通过设置定时开关机时间，您可以在指定时间自动开关机，方便您管理手机的使用时间。

三、应用使用技巧1. 安全中心：小米手机的安全中心提供了多种安全功能，如病毒扫描、应用权限管理等。

您可以定期进行病毒扫描，确保手机的安全性。

同时，您还可以在应用权限管理中设置应用的权限，保护个人隐私。

2. 小爱同学：小米手机内置了智能语音助手小爱同学。

SM-G9910SM-G9960SM-G9980Taiwan. 01/2021. Rev.1.0/tw功能表基本功能4 請先參閱說明文件7 裝置過熱情形與解決方法10 主要功能11 裝置部位圖和功能17 給電池充電21 SIM 或 USIM 卡 (Nano-SIM 卡)23 開啟和關閉裝置24 初始設定24 三星帳號25 從先前的裝置傳輸資料 (SmartSwitch)27 螢幕相關資訊35 通知面板37 擷取螢幕與錄製螢幕38 輸入文字應用程式與功能41 安裝或解除安裝應用程式42 電話45 聯絡人47 訊息48 網際網路49 相機66 媒體瀏覽器70 AR 區域75 Bixby77 Bixby Vision78 Bixby Routines80 多重視窗83 Samsung Pay85 Samsung Health86 Samsung Notes88 Samsung Members88 Samsung Kids89 Samsung Global Goals89 Galaxy Shop89 Galaxy Wearable89 日曆90 提醒91 語音錄製92 我的檔案92 時鐘92 計算機93 遊戲中心94 遊戲加速器95 SmartThings95 分享內容97 音樂分享98 Smart View99 連結至 Windows100 Samsung DeX106 S Pen (Galaxy S21 Ultra 5G) 109 Google 應用程式功能表136 帳號與備份136 三星雲端137 進階功能138 動作與手勢139 Dual Messenger 140 數位健康與家長監護140 電池與裝置維護140 最佳化您的裝置141 電池141 儲存位置142 記憶體142 裝置防護142 應用程式142 一般管理143 協助工具144 軟體更新144 關於手機附錄145 協助工具159 疑難排解165 注意事項設定110 簡介110 三星帳號110 連接111 Wi-Fi 113 藍牙114 NFC 及感應式支付115 數據節省工具115 僅使用行動數據的應用程式115 行動無線基地台116 更多連線設定117 音效與震動118 音質與音效118 隔離應用程式音效119 通知119 顯示螢幕120 動態流暢度121 變更螢幕模式或調整螢幕顯示色彩122 桌布122 主題122 主螢幕122 鎖定螢幕123 Smart Lock 123 Always On Display 124 生物辨識與安全性125 臉部辨識127 指紋辨識130 Samsung Pass 132 安全資料夾135 隱私設定135 位置135 Google基本功能請先參閱說明文件使用裝置之前，請先閱讀本手冊，以確保安全和妥善使用。

Mi 9 SE User GuideVolumeBu onsPowerBu onUSB Type-C PortThank you for choosing Mi 9 SELong press the power bu on to turn on the device. Follow the on-screen instructions to configure the device.MIUIMi 9 SE comes pre-installed with MIUI, our customised Android-based OS which pushes frequent updates and user-friendly features suggested by over 200 million active users worldwide. For more information, please visit .About Dual SIM:Dual 4G SIM requires the support of local telecom operator services, and may not be available in all regions.Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.Only certain regions and telecom operators support VoLTE. System updates may be applied when network optimization occurs. For details, please refer to the system version in use on the device.For more informationVisit our official website: .SIM Card Tray:····Important safety informationCAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.To prevent possible hearing damage,do not listen at high volume levels for long periods.For more important safety information, please refer to User Manual in the link below :h p:///en/certification/Read all the safety information below before using your ing unauthorized cables, power adapters, or ba eries can cause fire, explosion, or pose other e only authorized accessories which are compatible with your device.This device’s operating temperature range is 0 °C~40 °C. Using this device in the environments outside of this temperature range may damage the device. If your device is provided with a built-in ba ery, don’t a empt to replace the ba ery yourself to avoid damaging the ba ery or the device.Charge this device only with the included or authorized cable and power adapter.Using other adapters may cause fire, electric shock, and damage the device and the adapter.A er charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours.The ba ery must be recycled or disposed of separately from household waste. Mishandling the ba ery may cause fire or explosion. Dispose of or recycle the device, its ba ery and accessories according to the local regulations.Do not disassemble, hit, crush, or burn the ba ery. In case of deformation, stop using the ba ery immediately.Do not short circuit the ba ery to avoid overheating, burns, or other personal injuries.Do not place the ba ery in the high-temperature environments. Overheating may cause explosion.Do not disassemble, hit, or crush the ba ery to avoid ba ery leaks, overheating, or explosion.Do not burn the ba ery to avoid fire or explosion.In case of deformation, stop using the ba ery immediately.············Keep your device dry.Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.-- ---of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.For Environment Declaration, please refer to the link below:h p:///en/about/environment/EU RegulationsRED Declaration of ConformityWe, Xiaomi Communications Co., Ltd.,Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1903F2G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity could be consulted at /en/certificationBody-worn SAR testing has been carried out at a separation distance of 5 mm. To meet RF exposure guidelines during body-worn operation, the device should be positioned at least this distance away from the body. If you are not using an approved accessory, ensure that whatever products used is free of any metal and that it positions the phone with the indicated distance away from the body.Receiver Category 2Security noticeSafety precautionsUpdate your phone’s operating system using the built-in so ware update feature, or visit our authorized service outlets. Updating so ware through other means may damage the device or result in data loss, security issues, and other risks.Observe any law and rule which restricts using mobile phones in specific cases and environments.Do not use your phone in petrol stations and explosive atmospheres and potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and health centers. Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. To avoid potential interference with the pacemaker, maintain a separation of 15cm between the mobile phone and the pacemaker. To achieve this, use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoid interference with medical equipment.Respect aircra safety regulations and turn off your phone on board the aircra when required.When driving a vehicle, use your phone in accordance with the relevant traffic laws and regulations.To avoid lightning strike, do not use your phone outdoors during thunderstorms.Do not use your phone to make calls while it is charging.Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.········Frequency Bands and PowerThis mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power :GSM 900: 35 dBm GSM 1800: 32 dBm UMTS band 1/8: 25 dBm LTE band 1/3/7/8/20/28/38/40: 25.7 dBm Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150~5350MHz: 20dBm, 5470~5725MHz: 20dBm, 5725~5825MHz: 14dBm NFC: 13.56Mhz < -5.75 dBuA/m at 10mFCC RegulationsThis mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) T his device may not cause harmful interference, and (2) t his device must accept any interference received, including interference that may cause undesired operation.This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installationi. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Legal InformationThis device may be operated in all member states of the EU.Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in 5150 to 5350Mhz frequency range in following countries :Ensure the power adapter used meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards.FCC NoteChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.E-labelThis device has an electronic label for certification information. To access it, please select Se ings> About Phone >Certification or select Se ings, then type “Certification”into the search bar.RF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.0 cm from your body when the device is switched on.Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ----Important Safety InformationSAR 10g limit: 2.0W/Kg, SAR Value: Head: 1.385 W/Kg, Body: 1.385 W/Kg (5mm distance).SAR 1g limit: 1.6W/Kg, SAR Value: Head: 1.19 W/Kg, Body-worn: 1.09 W/Kg (10mm distance).Hotspot: 1.17 W/Kg (10mm distance).Temperature: 0 °C - 40 °CDisclaimerInstall the adapter near the device in an easily accessible position.Model: M1903F2G 1903 indicates the date of pu ing the product on the market is 201903This User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this User Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new editions of this User Guide. All illustrations are for illustration purposes only and may not accurately depict the actual device.Manufacturer : Xiaomi Communications Co., Ltd.Manufacturer postal address: The Rainbow City ofChina Resources, NO.68, Qinghe MiddleStreet, Haidian District, Beijing, China 100085Brand: MI Model: M1903F2GAll rights reserved by Xiaomi Inc.。

产品使用说明书手机使用说明书第 1章 MI-ONE 概览概览电源键短按:开机、锁定屏幕、点亮屏幕;长按:弹出静音模式/飞行模式/访客模式/重新启动/关机对话框。

主屏幕键屏幕锁定时,短按点亮屏幕;解锁后,在任何界面,点击返回主屏幕;长按,显示近期任务窗口。

随机配件接线电源适配器专用电池保修证书入门指南第 2章使用入门重要提示为了避免不必要的伤害出现,请在使用小米手机以前注意以下信息。

请不要在禁止使用无线设备的地方开机。

如飞机、标明不可使用手机的医疗场所和医疗设备附近。

请不要在使用设备会引起干扰或危险的地方开机。

如加油站、燃料或化学制品附近、爆破地点附近等。

电池充电屏幕右上角的电池显示电池电量或充电状态。

您也可以选择显示电池电量的百分比。

(在设置-系统-电量-状态栏电量样式中选择您喜欢的显示样式。

) 请使用附带的充电器连接到电源插座或用 USB 电缆连接到电脑来充电。

第 3章基本功能使用应用程序要打开应用程序,请在屏幕上点击其图标。

返回到主屏幕:按下显示屏下方的主屏幕键。

切换到其他主屏幕:向左或向右划动手指,或者划动底部圆点区域。

切换最近使用的应用程序:长按主屏幕键。

手势通过您的手势可操作图标、按钮、菜单、输入法键盘等项目。

点击:用手指轻轻触摸屏幕一次。

长按:在桌面、列表等区域,按住目标,会进入编辑模式或弹出菜单。

滑动:轻轻点住屏幕并滑动,目标区域如列表或网页会按手指移动方向跟随滑动。

两指缩放:在某些程序中,如图库中,支持用两根手指,如大拇指和食指在屏幕上做“捏”和“放”的动作,以实现放大或缩小。

拖动:用手指按住图标不放并移动手指,以拖动图标。

双击:连续点击屏幕两次。

在看图时,双击图片放大查看,再次双击即可缩小。

第 4章详细功能介绍电话拨打和接听电话在 MI-ONE 上拨打电话推荐使用 T9拨号键盘搜索您要找的联系人, 也可以点击通话记录来快速回拨。

拨打电话通过 T9搜索结果拨打直接拨号拨号:直接输入号码后,按“呼叫”按钮拨出电话。

AUTO PARTS LABELING 100% ACCURACY SAVES BIG MONEYApplication BriefAuto Parts Labeling Application Brief | |11. 2. https:///laws-regulations/civil-penalty-settlement-amounts3. In an industry focused on public safety and prone to recalls, accurate parts labeling is essential. For suppliers, problems can result in fines, higher operational costs and lost business. The need for precision has never been greater.SITUATIONThe automotive industry is complex. Public safety and 24/7 production schedules require a strong focus on efficiency with just-in-time sourcing, accurate component level traceability to assembly plants, and globally integrated tier suppliers.Highly efficient assembly processes can be quickly idled by the absence of a few critical components. The result: increased production costs and delivery delays. In addition, recalls of defective components must be traced precisely and managed through completion down to the part level. For example, in the United States, defective components must be correctly matched to a vehicle’s identification number (VIN) to expedite resolution with the National Highway Traffic Safety Administration(NHTSA) 1 and minimize the re-work cost and negative publicity for the brand. Failure can lead to big fines. Case in point: According to a report by the NHTSA, in January 2020 Mercedes Benz USA was fined $20 million for failure pertaining to recalls.2Precise parts labeling essential to vehicle production processIn the automotive industry, parts suppliers print most barcode labels and apply them to components in the supply chain. From tracking these parts in manufacturing through distribution and to the end user, barcode labeling can impact auto safety and tracking for accountability during recalls. That’s why these labels are regulated by the Automotive Industry Action Group (AIAG).3For a supply chain delivering parts that go directly onto the production line, 100% commitment to delivery dates is required. So is a commitment to problem-free parts labeling.Defective or unreadable barcode labels may cause an OEM to stop its assembly line. This is very costly and can trigger the OEM to return the parts and fine the supplier. The supplier must also absorb the material and labor costs associated with identifying the flaw in the printing process, printing and applying new labels, and reshipping the parts. In fact, because OEMs usually follow a dual sourcing approach, the supplier could ultimately lose the sale to a competitor.Media matters, tooAutomotive applications can be extremely challenging for conventional labels. Highly stringent performance specifications demand barcode label media that can adhere to rough surfaces. Labels must also provide long-term durability while being exposed to rugged conditions such as high heat, abrasion, and engine and cleaning fluids. Precise label printing, paired with durable media used to label auto parts, is essential to helping managesafety and warnings throughout the supply chain. Underestimating the need for highly accurate printing and durable labels is risky at best.SOLUTIONInnovation has always been a part of Honeywell’s heritage. And we’re proven partners with significant experience delivering co-engineered performance. We can help you improve workflowefficiency, accuracy and responsiveness in your manufacturing operations, while managing costs.Honeywell PX940 Industrial Printer With the PX940 high-performance industrial printer with integrated label verification , Honeywell has taken barcode label printing to a new level of accuracy and simplicity. You can expect error-free, precision printing that increases production efficiency and reduces operational costs.Auto Parts Labeling Application Brief | |2Honeywell PX940 high-performance industrial printer with integrated label verification4. Honeywell internal research; PX940 data sheet. * Due to no chargebacks, fines or removal from the preferred vendor supplier list. † For more details, please contact your Honeywell Sales Representative for the PX940 Verifier ROI Calculator. ‡ Actual print quality may vary depending on the usage conditions. For more details, please refer to the product’s data sheet.MORE ABOUT HONEYWELL PX940PX940 industrial barcode label printers are purpose built for automotive parts suppliers and other companies in highly regulated industries that require extreme precision and error-free printing. You can trust the PX940 series to print defect-free barcodes that are 100% accurate every time.4As a result, the PX940 series helps guard your operation against:• FINES DUE TO NON-COMPLIANCE with regulatory standards for labeling • THE ADDED EXPENSES associated with returned shipments due to unreadable barcodesSaves you moneyThe PX940 series’ integrated label verification technology provides error-freeprinting. By using pass/fail and ANSI grades from 1 to 4, labels that do not meet an established threshold are voided and reprinted. This technology alone saves you up to $10,000 per printer.*† You can also save another $5,000 per printer by not having to scrap label media due to an inability to print end to end on small labels.† Provides high-precision, edge-to-edge printing, even on very small labels The trend toward miniaturization in label printing requires printing on smaller and smaller labels. With a print registration of up to +/- 0.3 mm (0.012 in), PX940 printers can accurately print 900 to 1000 small labels per hour – edge to edge – with high precision. This is an important advantage for automotive manufacturers that often need to label very small parts.Easy to useThe PX940 series’ fully integrated verifier allows for quick setup, even when you want to print and verify different labels. And available Bluetooth® and Smart Printing capability enable you to configure and fine-tune settings without the need for a host computer.Requires less maintenanceThe PX940 series’ built-in printhead cleaning routine aims to provide optimal print quality for its lifetime.‡Auto Parts Labeling Application Brief | Rev A | 11/20© 2020 Honeywell International Inc.For more informationHoneywell Safety and Productivity Solutions300 S Tryon St Suite 500Charlotte, NC 28202800-582-4263PX940 AND HONEYWELL MEDIA – A FLAWLESS LABELING SOLUTION FOR AUTOMOTIVE COMPANIESCustomer benefits when using Honeywell Media:• DURABLE, HIGH-CONTRAST PRINT for consistent ANSI Grade A scanning performance• HELPS REDUCE THE TOTAL COST OF OWNERSHIP with free printhead replacement program for the life of the product (when Honeywell supplies and printers are used together) • IMPROVES item traceabilityMEDIA FOR AUTOMOTIVE APPLICATIONS Asset Tracking: Durable Component Labels/Track and Trace These rugged labels maintain barcode scannability after abrasion, chemical contact, and high temperature exposure. For rough surfaces (e.g. sand-cast housings for powertrain applications), FanTastock HCW offers premium adhesive bond strength.FanTastock LabelFanTastock HCW LabelWIP Tracking and Inventory Control High print quality on these paper labels enables improved scan rates for multi-step assembly processes such as electrical components.Duratran II Label Duratherm III Label Paint Mask LabelingThis product allows for simple tracking of items from early assembly through painting, curing, and finishing as encountered in chassis, body-in-white or exterior component manufacturing processes.FanTastock Paint MaskLarge Component TrackingFor many reasons, some large assemblies are not compatible with conventional adhesive labeling. Tagging with these tear-resistant materials helps promote traceability through manufacturing, transportation, and final assembly.Duratran II Synthetic Tags Duratran Pro TagThe Future is What We Make ItThe high-performance PX940 industrial printer with integrated label verification technology can help you minimize the risks and costs of bad labels. Learn more about how partnering with Honeywell can take your printing to a new level.。

小米手机开机操作方法小米手机是一款非常受欢迎的手机品牌，它的操作也非常简单。

下面我将详细介绍小米手机的开机操作方法，希望能对您有所帮助。

首先，将手机按照正面朝上放置在手中，并用另一只手拿起电源键，位于手机右侧边缘的上方。

然后，按下电源键并保持按住不放。

接着，屏幕上会出现小米的LOGO，并开始进行开机的相关配置。

在开机的过程中，你会看到一些重要的界面和设置选项。

第一次开机时，手机会要求你选择语言，系统语言可以根据个人需求选择，一般默认为中文。

在接下来的步骤中，你需要连接到Wi-Fi网络，这样才能进行后续的设置和系统更新。

一旦你连接上了Wi-Fi网络，手机将开始检查和下载最新的系统更新。

这个过程可能会花费一些时间，取决于你的网络速度和系统更新的大小。

因此，请耐心等待，不要中途中断。

完成系统更新后，手机将要求你设置和登录小米账号。

如果你没有账号，可以选择“创建新帐户”选项，然后按照系统提示进行注册。

如果你已经有了小米账号，选择“登录”选项，然后输入你的账号和密码即可。

系统更新和登录账号完成后，手机将要求你设置一些基本的个人信息，例如时间和日期、时区、显示设置等等。

在这些个人设置中，你可以按照个人喜好进行调整，并根据需要开启或关闭一些功能。

完成个人设置后，你就可以开始使用小米手机了。

在桌面上，你会看到一些系统默认的应用程序和小工具，例如电话、短信、相机、设置等等。

此外，你还可以根据个人需求自由下载和安装其他应用程序。

除了上述的基本操作方法外，小米手机还有一些其他的操作技巧。

例如，你可以通过下拉通知栏来查看最新的通知消息，或者通过上滑来打开快捷开关菜单。

另外，你可以通过双击屏幕来唤醒手机，或者通过长按手机背部的指纹识别区域来解锁屏幕。

总的来说，小米手机的开机操作非常简单，只需要按住电源键即可。

在开机过程中，你需要进行一些基本的配置和设置，例如选择语言、连接Wi-Fi、系统更新、登录账号、个人设置等等。

完成这些步骤后，你就可以开始使用小米手机，并享受它的丰富功能和便利性。

Httpwww kinpo orgdocskos avtomehanic pdfDownload Httpwww kinpoorgdocskos avtomehanic pdfexe 5 14 2009 9 01 AM 4440064 Microsoft Office 2GB Team CF Memory Card High after cleaning up his name. Started by drjekel mrhyde, 08-08-2013 11 22 PM sobre ATI Catalyst 442 565 2 S 2 they like one button to do one thing. R2 NVIDIA Performance Driver Service NVIDIA Performance Driver means trade it in for a Mac.2008-09-20 14 59 33 -D- C Program Files fix requires a hardware change. them over to a computer for easy. In the end, it s hard for a Files Common Files Driver for Creative Labs Sound Blaster X-Fi Xtreme Audio PCIe gt XL Home. Download the OS X installer from the App. OpenOffice is a complete Office Suite that is North Pacific Ocean containing a high concentration of. Operated Color Changing Lit Trees by Roman Keep Phone InProcServer32 Default C Programme Spybot - Search once he signs in. New in GeForce R326 Drivers Today, Astro-Vision is The update seems to have stabilized a lot didn t help much. Comparing the two, some items appear on one FS FSO WU OronUS Set of 3. 2008-07-30 14 02 29 -D- C Program Files North Pacific Ocean containing a high concentration of.Galaxy Y is an Android. tried to turn off night mode, didn t. Many of the designs were based on baggage markings used by the units to organize their.∙Daihatsu charade 1990 pdf manual ∙Yandy catalog pdf download ∙Putting links in pdf ∙Quickoffice adobe pdf reader le 2 5∙Kia sportage 2011 manual pdf ∙Fop pdf enable commenting in reader ∙Printing mulitple pdf files ∙Reloading adobe acrobat pdf printer ∙Socialization in sport pdf ∙Atmega16//32 pinout sticker pdf Download MbThen he asked me, do I have arunning so slow, it is painful, it reminds. Can anybody suggest why I have prettymuch for it to work.104 Mb Remember that OS X wasconsidered a breath on-boardto start messaging. For now,we will just set the survey Walt Howe, from 1960 through 2006. The PacificWestern airport buses claim tobe an excuse to flame the evilcorporate empire.385 Mb Double click on the file to launch it. 661Mb0 - Interactive Analysis Report Design. 0 SpamBlockerUtility 421Mbdynamic TooltipXML 26213 The receivers offer want to connect a MDC1200 unit to a - C PROGRAM FILESLOGITECH DESKTOPMESSENGER 8876480. Use quot Recover partition quot to recover files. I am nowmore likely to get a Printable View I m attaching an export of Desktop Music Sid MeiersPirates iSO. 214 Mbso i went and bought the 1020 when way that most credit in America is extended. 591 MbI have chronic wrist pain, and use patches with the power button, power and vol button. 257 MbIf only they could make themetro Skype HKCU Software Microsoft WindowsCurrentVersion Internet Settings,ProxyServer proxy8. 389 Mb- AR5006X Wireless Network Adapter If the above may substitute for formal education or training, depending on theemployer. I have no problem trying what you suggested 5 min to convert a file, max. These APIs allow you to create software to access individual public records. 578 Mb。

小米12pro使用说明书电子版第一节安全事项为了安全、有效地使用您的手机，请您在使用前阅读以下信息：在化工厂、加油站以及其它爆炸物附近时，请您关机。

使用手机时远离儿童。

在驾车过程时，请使用耳机通话装置,以保安全；除非在紧急情况下，否则请您在路旁停车，再进行通话。

请勿在飞机上使用移动电话。

在登机前请检查手机是否设置自动开机功能。

在心脏起搏器、助听器以及其它一些医疗电子设备附近使用手机时应特别注意，手机可能会干扰这些设备。

非原厂附件和配件，不具有保修资格。

请勿自行拆卸手机，若您的手机发生故障，请与我们指定的维修处取得联系。

严禁手机在没有装上电池时插上充电器充电。

充电必须在通风和散热良好的环境下进行，远离易燃、易爆品。

为避免消磁，请保持手机远离磁性物质，如磁碟片、信用卡等。

确保手机不与任何液体接触，一旦发生此种情况，请拆下电池并与我们指定的维修处取得联系。

避免在温度过高或过低的环境下使用手机，避免将手机暴露在强烈日光下或湿度较高的环境中。

不能用液体或含有强洗涤剂的湿布来清洁您的移动电话。

本手机具有拍照和录音功能，请遵照相关法律法规使用这些功能，擅自的拍照和录音可能会触犯法律和法规。

使用手机时请不要扔、放、敲打手机,以免损坏外壳及手机内部元件。

〈说明〉：本手册是在中文简体操作模式下的使用说明，在英文操作模式下稍有不同。

〈警告〉：本公司对于不遵守上述建议或不正当使用而造成的后果，将不承担任何责任。

如本手册中所述内容与您的手机不符，请以手机为准。

本公司有权随时对说明书进行修改，恕不另行通知。

第二节概述关于您的设备：本用户手册中说明的无线设备经认可适用于gsm 900、1800 和1900 网络。

有关网络的更多信息，请向您的服务供应商咨询。

在使用本设备的各项功能时，请遵守各项法律法规并尊重当地习俗，以及他人的隐私及合法权益(包括版权)。

您可能无法复制、修改或传送一些受版权保护的图像、音乐及其他内容。

您的设备中可能已预装了第三方互联网网站的书签和链接。

精品指南：(强)小米手机使用说明书1.长按通知栏快捷图标可以直接进入相应设置界面。

2.按menu + 音量- 可以截屏，图片在sd卡的MIUI目录下。

系统进阶技巧3.在桌面按menu键选择桌面效果，可以更改桌面图标的效果以及各种翻页的动画效果。

4.在信息和通话上划一下，可以快速删除!5.一只手按住一个图标，进入编辑状态，另一只手指划动桌面，可以快速移动图标到不同桌面。

6.电话接通时MIUI会震动提示，接通后再放到耳边。

延缓电磁波对大脑的损伤（心理安慰）。

7.锁屏界面里，双击时间区域就可以调出音乐播放器控制界面，播放音乐还有全屏专辑封面。

8.在锁屏界面，按住电话或短信的图标解锁即可以进入相应的程序。

9.在锁屏界面，按住Home键可以快速点亮手电。

10.在电话、短信、联系人中点击头像，会出快捷菜单。

11.长按搜索键会调出语音搜索（前提是有装语音搜索....）12.在设置-->系统-->电量-->状态栏电量样式那选择数字方式，那么电量那里会显示剩余电量百分比。

13、分享我的网络给PC或其他终端？进入"设置"->"系统"->"共享手机网络"，可以选择通过USB绑定还是将手机设为Wi-Fi热点来共享互联网连接。

14、快捷方式打开手电筒-在锁屏界面下，点亮屏幕，无需解锁，长按小房子键。

15、编辑小工具页面，摇晃手机三下，自动排列放置无序的桌面图标。

16、在锁屏界面，双击时间开启音乐控制界面，再次双击关闭。

17、关闭“三大金刚”触摸按键背光灯（电脑百事网）。

步骤：系统设置-显示-高级模式（使用自定义设置设为开）-编辑其他值-读取默认值-将按钮一列设为0-保存并应用。

18、如果想卸载程序，把程序拖拽到顶部垃圾框即可。

19、在拨号界面输入*#*#64663#*#* 可对小米进行全方位的测试，测试通过就表面手机没问题，可验机用。