矿用本质安全型PLC产品选型手册和利时集团HollySys Group目 录矿用本质安全型控制系统四大关键Ex元件矿用本质安全型PLC系列MKC5109i 本安PLC28点CPU模块 MKC5211i 本安PLC16通道DI模块 MKC5221i 本安PLC12通道DO模块 MKC5311i 本安PLC4通道AI模块 MKC5331i 本安PLC4通道RTD模块 MKC5411i 本安PLC CAN通讯模块MKC5701i矿用本质安全型人机界面MKC5702i矿用本质安全型键盘MKC59XYi输出本质安全型电源和利时可靠性试验中心气候环境实验室EMC实验室机械环境实验室1 3 6 8 9 11 13 15 20 2428 29 30 31矿用本质安全型控制系统设备离不开四种关键部件：本质安全型稳压电源、本质安全型控制器、本质安全型人机界面、本质安全型键盘。
和利时凭借长年的技术积累和丰富的检测手段，成功开发了高性能的矿用输出本质安全型电源、矿用本质安全型PLC 、矿用本安人机界面和矿用本安键盘，均申请了防爆合格证书，可大大提高矿用本安型电气设备的开发速度。
矿用本质安全型控制系统四大关键Ex元件1 产品概述矿用本质安全型PLC 严格按照GB3836.1和GB3836.4标准设计，具有矿用本质安全特性且具有通用PLC 所有功能，在煤尘、瓦斯危险环境中可直接置于本安腔体内使用，适于在变化的控制场合进行现场组态，降低控制器体积和重量，便于移动和带电开盖维护。
该PLC 由CPU 模块和系列扩展模块组成，CPU 模块可以单独运行，也可以在CPU 模块IO 点数不满足系统需求时，连接扩展模块运行。
矿用本质安全型PLC 系列矿用本质安全型PLC 系列12 产品组成类 型型 号防爆证号名 称CPU模块MKC5109i 320150798X 本安PLC28点CPU模块本安PLC16通道DI模块本安PLC12通道DO模块本安PLC4通道AI模块本安PLC4通道RTD模块本安PLC CAN通讯模块320150799X 320150800X 320150797X 320150801X 320150837XMKC5211i MKC5221iMKC5311i MKC5331i MKC5411i扩展模块23 适用环境4 产品特点5 尺寸图海拔高度： ≤2000m ； 工作温度： -20～60℃ 存储温度： -40～70℃工作湿度： 5～95% 工作环境： 无滴水及震动 防爆类型： 本质安全型1)扩展能力：可以选择模拟量、数字量和通讯模块扩展；2)多机互联，通过RS 485实现多机互联，最多可实现16台CPU 之间的数据共享；3)支持以太网通讯下载，方便用户通过局域网对本安PLC 进行用户程序下载，远程数据 监控；4)可插拨端子，配置可插拨端子，在产品更换时，无需重新接线，避免了接线和拆线过程 中引入的故障，同时节省了更换模块的时间；5)简单可靠的安装；可实现导轨和螺钉两种安装方式；1)CPU模块2)扩展模块矿用本质安全型PLC 系列36安装方式7 技术指标MKC5109i 本安型PLC 28点CPU 模块456矿用本质安全型PLC 系列MKC5211i 本安型PLC 16通道数字量输入模块 7MKC5221i 本安型PLC 12通道DO模块MKC5311i 本安型PLC 4通道模拟量输入模块矿用本质安全型PLC 系列MKC5331i 本安型PLC 4通道RTD 模块接线方式重量（Max）防护等级500g现场侧可插拔端子，系统侧扁平线IP20矿用本质安全型PLC 系列MKC5411i 本安型PLC CAN 通讯模块MKC5701i矿用本质安全型人机界面1产品概述MKC5701i矿用本质安全型人机界面严格按照GB3836.1和GB3836.4标准设计，具有矿用本质安全特性且具有通用人机界面所有功能，在煤尘、瓦斯危险环境中可直接置于本安腔体内使用。
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.materialS:Stiles c—3/4'' (19mm) thick, Solid Color Reinforced Composite with GraffitiOff ™ surface thermoset and integrally fused into one homogenous piece. Surface, edge, core are to be the same color. Leveling device: 7 gauge, 3/16" (5mm) thick, corrosion-resistant, chromate-treated, double zinc-plated steel angle leveling bar bolted to stile; furnished with 3/8'' (10mm) stainless steel diameter threaded wedge anchor, hex nuts, lock washer, flat washers, and shoe retainers. Shoe: 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish; 4'' (102mm) high.Panels —1/2'' (13mm) thick, Solid Color Reinforced Composite with GraffitiOff ® surface thermoset and integrally fused into one homogeneous piece. Surface, edge, core are to be the same color.doors —3/4'' (19mm) thick, Solid Color Reinforced Composite with GraffitiOff ® surface thermoset and integrally fused into one homogeneous piece. Surface, edge, core are to be the same color.Posts (for 1093 Series screens only) — 1-1/4'' (32mm) square tubing; 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Floor and ceiling connections are constructed of 18-8 S, type-304, heavy-gauge stainless steel. Furnished in 10-ft (305-cm) lengths; to be cut in field to job specifications.Headrail (for 1092 Series compartments only) —Extruded anodized aluminum with satin finish. Enclosed construction with sloping top. Face has raised grip-resistant edge.Designer's Notes: Headrails with integral curtain tracks and hooks are available for compartments without doors. Optional vinyl curtains are available.Wall Posts —1" x 1-1/2" (25 x 38mm) tubing; 18-8 S, type-304, 16-gauge (1.6mm) stainless steel with satin-finish. 58" (147cm) high, pre-drilled for door hardware.Heavy-duty Hardware (standard) — Hinges, door latches, door keepers, clothes hooks, door stop plates, and mounting brackets are constructed of 18-8 S, type-304, heavy-gauge stainless steel with satin finish. Threaded inserts are factory installed for securing hinges, door stop plates, and door latches. Theft-resistant, stainless steel pin-in-head Torx screws are furnished for door hardware and all mounting brackets. Barrel hinge is adjustable to adjust door swing of unoccupied toilet compartment from partially open to fully closed. Toilet compartment door is locked from inside by sliding door latch into keeper. Threaded inserts are factory installed to secure door hinges, latch and door stops. Two door stops prevents door from being kicked in/out beyond stile by vandals. Mounting screws for stile to panel bracket, latch keeper, and coat hook connections are through-bolted.institutional Hardware (.67 option) —Hinges, door latches, door keepers, clothes hook, U-channels, door stop plates and angle brackets are constructed of 18-8 S, type-304, heavy-gauge stainless steel with satin finish: one-piece, full-height hinge is 16 gauge (1.6mm); one-piece door keeper is 11 gauge (3.2mm);one-piece, full-height U-channels and angle brackets are 18 gauge (1.2mm). U-channels secure panels to stiles, and angle brackets secure panels and stiles to walls. Door latch slides on a shock-resistant nylon track. Two door stops prevent door from being kicked in/out beyond stile by vandals. Theft-resistant, stainless steel pin-in-head Torx screws are furnished for door hardware, U-channels, and angle brackets. Doors are equipped with a self-closing hinge. Threaded inserts are factory installed to secure door hinge, latch, and doorstops. Mounting screws for stile-to-panel brackets and latch keeper connections are through-bolted. To specify institutional hardware, add suffix .67 to series number. Example: specify 1092.67 for overhead-braced partitions furnished with institutional hardware, including factory-installed threaded inserts for door hardware attachment.inStallation:Bobrick installation instructions are packed with each shipment and are available also in advance on request.notes:1. Ceiling-hung and floor-to-ceiling toilet compartments require structural members (not furnished by Bobrick) in ceiling. For suggested types of ceiling supportsystems, see Bobrick Advisory Bulletin TB-32.2. Wall backing is required to secure the mounting brackets of panels, stiles, and wall posts. For suggested wall backing, see Bobrick Advisory Bulletin TB-46.3. Floor-anchored stiles are furnished with expansion shields and threaded rods. The expansion shields require minimum 2'' (50mm) penetration into minimum3'' (75mm) thick structural concrete.4. Bobrick stainless steel partition-mounted washroom accessories are available for mounting in panels between two compartments. See current Bobrick Catalogfor description of accessories. Cutouts in panels can be pre-cut for Bobrick models at factory if location and size of all cutouts and Bobrick model numbers are furnished at time of order.GUarantee:Bobrick toilet partitions including all hardware and mounting brackets are guaranteed to be free from defects in material and workmanship for a period of one year from date of purchase. Any products returned to Bobrick under this guarantee will be repaired or replaced at no charge. 10-Year Warranty: Bobrick ex-tends a ten-year limited warranty from date of purchase for SierraSeries® Solid Color Reinforced Composite partition panels, doors, and stiles against breakage, warpage, delamination and corrosion when materials are properly installed, and normally used.SpeCiFiCation:Water-resistant, solid color reinforced composite ____________________ (insert one: toilet partitions, dressing compartments, shower dividers, urinal screens) shall be _______________ (insert one: overhead-braced toilet partition or floor anchored, wall-hung, post-to-ceiling urinal screens). Stiles, panels and doors shall be constructed of Solid Color Reinforced Composite with GraffitiOff ® surface thermoset and integrally fused into one homogeneous piece. Surface, edges and core are to be same color. Solid Color Reinforced Composite material shall be covered by a 10-year limited warranty against breakage, warpage, corrosion, and delamination. Stiles and doors shall be 3/4'' (19mm) thick; panels shall be 1/2'' (13mm) thick. All units shall meet ICC and NFPA Class B or UBC Class II, ASTME 84 Fire-Resistance Standards. Stiles shall have leveling device that is concealed by a one-piece, type-304, satin-finish stainless steel shoe that is 4'' (102mm) high.Stiles, panels and doors shall be __________ (insert color name and number from current Bobrick catalog). Headrails for overhead-braced compartments shall be anodized aluminum with satin finish. **All door hardware and mounting brackets shall be type-304 stainless steel with satin finish. All doors shall be supplied with three hinges. Threaded inserts shall be factory installed for securing door hinges, latches and door stops. Theft-resistant, stainless steel pin-in-head Torx screws shall be furnished for door hardware and all mounting brackets. Through bolts shall be used for securing latch keeper, clothes hook and panel-to-stile brackets. A clothes hook shall be furnished for each door with heavy duty hardware option. Hinges shall be adjustable to hold doors of unoccupied compartments partially open or fully closed. Two door stops shall be furnished for each door to prevent it from being kicked in/out beyond stile by vandals. Manufacturer's service and parts manual shall be provided to the building owner/manager upon completion of project.**To specify Institutional hardware, replace end of specification paragraph with: .67 option All door hardware, U-channels, and angle brackets shall be type-304 stainless steel with satin finish: one-piece, full-height hinges shall be 16 gauge (1.6mm); one-piece door keepers shall be 11 gauge (3.2mm); one-piece, full-height U-channels and angle brackets shall be 18 gauge (1.2mm). U-channels shall be furnished to secure panels to stiles, and angle brackets furnished to secure panels and stiles to walls. Doors shall be equipped with a self-closing hinge. Two door stops shall be furnished for each door to prevent it from being kicked in/out beyond stile by vandals. A clothes hook shall be furnished for each door. Theft-resistant, stainless steel pin-in-head, Torx screws shall be furnished for door hardware, U-channels, and angle brackets. Through bolts shall be used for securing latch keeper and panel- to-stiles brackets. Threaded inserts shall be factory installed to secure all door hinges, latches, and doorstops. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request._________________ (insert one: toilet Partitions, dressing Compartments, Shower dividers, Urinal Screens) shall be ____________________ Series (insert series number) of Bobrick Washroom equipment, inc., Clifton Park, new York; Jackson, tennessee; Los Angeles, California; Bobrick Washroom equipment Company, Scarborough, ontario; Bobrick Washroom equipment Pty. Ltd., Australia; and Bobrick Washroom equipment Limited, United Kingdom.The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 1090 Revised 8/08 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.。
