当前位置：文档之家 › MC10H188FN中文资料

MC10H188FN中文资料

  • 格式：pdf
  • 大小：98.22 KB
  • 文档页数：3

Pin assignment is for Dual–in–Line Package. For PLCC pin assignment, see the Pin Conversion Tables on page 6–11 of the Motorola MECL Data Book (DL122/D).
0° Characteristic Power Supply Current Input Current High Input Current Low High Output Voltage Low Output Voltage High Input Voltage Low Input Voltage Symbol IE IinH IinL VOH VOL VIH VIL tpd 0.7 0.7 tr tf 0.7 0.7 2.2 1.9 2.4 2.4 0.7 0.7 0.7 0.7 2.2 1.9 2.4 2.4 0.7 0.7 0.7 0.7 2.2 1.9 2.4 2.4 ns ns Min — — 0.5 Max 46 495 — Min — — 0.5 25° Max 42 310 — Min — — 0.3 75° Max 46 310 — –0.735 –1.60 –0.735 –1.45 Unit mA µA µA Vdc Vdc Vdc Vdc
TRUTH TABLE Inputs Output X Y OUT L Lቤተ መጻሕፍቲ ባይዱL H L H L H L L H H
AC PARAMETERS
Propagation Delay Enable Data Rise Time Fall Time ns VCC1 AOUT BOUT COUT AIN BIN CIN VEE
S
N
S
C
E 0.004 (0.100) G G1 0.010 (0.250) S T L–M J –T–
SEATING PLANE
K1 K F VIEW S 0.007 (0.180)
M
VIEW S
S
T L–M
S
N
S
N
S
NOTES: 1. DATUMS –L–, –M–, AND –N– DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM –T–, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).
元器件交易网
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Hex Buffer with Enable
The MC10H188 is a high–speed Hex Buffer with a common Enable input. When Enable is in the high–state, all outputs are in the low–state. When Enable is in the low–state, the outputs take the same state as the inputs. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay and no increase in power–supply current. • Propagation Delay, 1.3 ns Typical Data–to–Output • Power Dissipation 180 mW Typ/Pkg (No Load) • Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range) • Voltage Compensated • MECL 10K–Compatible MAXIMUM RATINGS
Characteristic Power Supply (VCC = 0) Input Voltage (VCC = 0) Output Current — Continuous — Surge Operating Temperature Range Storage Temperature Range — Plastic — Ceramic Symbol VEE VI Iout TA Tstg Rating –8.0 to 0 0 to VEE 50 100 0 to +75 –55 to +150 –55 to +165 Unit Vdc Vdc mA 6 °C °C °C 7 10 11 12 9 5
0.007 (0.180) M T L–M U
S
N
S S
0.007 (0.180) M T L–M
N
S
20
1
X V VIEW D–D
G1
0.010 (0.250)
S
T L–M
S
N
S
A Z R
0.007 (0.180) M T L–M 0.007 (0.180) M T L–M
S
N N
S
S
S
H
0.007 (0.180) M T L–M
–1.02 –0.84 –0.98 –0.81 –0.92 –1.95 –1.63 –1.95 –1.63 –1.95 –1.17 –0.84 –1.13 –0.81 –1.07 –1.95 –1.48 –1.95 –1.48 –1.95
VCC1 = Pin 1 VCC2 = Pin 16 VEE = Pin 8
MILLIMETERS MIN MAX 9.78 10.03 9.78 10.03 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 ––– 0.64 ––– 8.89 9.04 8.89 9.04 1.07 1.21 1.07 1.21 1.07 1.42 ––– 0.50 2_ 10 _ 7.88 8.38 1.02 –––
3/93
© Motorola, Inc. 1996
2–284
REV 5
元器件交易网
MC10H188
OUTLINE DIMENSIONS
FN SUFFIX PLASTIC PLCC PACKAGE CASE 775–02 ISSUE C
B –N– Y BRK D –L– –M– W D Z
DIP PIN ASSIGNMENT
1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC2 FOUT EOUT DOUT FIN EIN DIN COMMON
NOTE: Each MECL 10H series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 Ifpm is maintained. Outputs are terminated through a 50–ohm resistor to –2.0 volts.
MECL Data DL122 — Rev 6
2–285
MOTOROLA
元器件交易网
MC10H188
OUTLINE DIMENSIONS
L SUFFIX CERAMIC DIP PACKAGE CASE 620–10 ISSUE V
9
–A–
16
–B–
1 8
C
L

合集下载

паркер汉尼夫公司水力系列产品目录说明书

паркер汉尼夫公司水力系列产品目录说明书

ABV101............Accumulator Bleed-Down Valve......................MV15-MV17 CDP161............Double P.O. Check Valves..................................LH85-LH86 CDPH103..........Double P.O. Check Valves..................................LH83-LH84 CP044P............Single P.O. Check Valves...................................LH46-LH48 CP074P............Single P.O. Check Valves...................................LH49-LH51 CP084P............Single P.O. Check Valves...................................LH52-LH54 CPC101P..........Pilot-to-Close Check Valves...............................LH64-LH66 CPC161P..........Pilot-to-Close Check Valves...............................LH67-LH69 CPD084P..........Double P.O. Check Valves..................................LH80-LH82 CPH064P..........Single P.O. Check Valves...................................LH55-LH57 CPH104P..........Single P.O. Check Valves...................................LH58-LH60 CPH124P..........Single P.O. Check Valves...................................LH61-LH63 CS041B............Shuttle Valves....................................................LH87-LH89 CSH101B..........Shuttle Valves....................................................LH90-LH92 CSP161............Single P.O. Check Valves...................................LH78-LH79 CSPH103..........Single P.O. Check Valves...................................LH76-LH77 CV041P............Check Valves.........................................................LH1-LH3 CV081P &091P.................Check Valves.........................................................LH4-LH6 CV082P............Check Valves.........................................................LH7-LH9 CV101P............Check Valves.....................................................LH10-LH12 CV102P............Check Valves.....................................................LH13-LH15 CV103P............Check Valves.....................................................LH16-LH18 CVH061P..........Check Valves.....................................................LH25-LH27 CVH071P..........Check Valves.....................................................LH28-LH30 CVH081P &091P.................Check Valves.....................................................LH31-LH33 CVH103P..........Check Valves.....................................................LH34-LH36 CVH084P..........Check Valves.....................................................LH37-LH39 CVH104P..........Check Valves.....................................................LH40-LH42 CVH121P..........Check Valves.....................................................LH43-LH45 CVH161P..........Check Valves.....................................................LH19-LH21 CVH201P..........Check Valves.....................................................LH22-LH24 CVO101P..........Vent-to-Open Check Valves...............................LH70-LH72 CVO161P..........Vent-to-Open Check Valves...............................LH73-LH75 DF083...............Sol. Operated, P.C. Proportional Flow Cont...........PV1-PV4 DF092C............Sol. Operated, P.C. Proportional Flow Cont...........PV5-PV8 DF092N............Sol. Operated, P.C. Proportional Flow Cont.........PV9-PV12 DF102C............Sol. Operated, P.C. Proportional Flow Cont.......PV13-PV16 DF102N............Sol. Operated, P.C. Proportional Flow Cont.......PV17-PV20 DF102P............Sol. Operated, P.C. Proportional Flow Cont.......PV21-PV23 DF122...............Sol. Operated, P.C. Proportional Flow Cont.......PV24-PV27 DF161C............Solenoid Operated, Throttle Valves....................PV28-PV31 DF201C............Solenoid Operated, Throttle Valves....................PV32-PV35 DH082..............Pilot Operated, 2-Way Valves............................DC22-DC24 DH103..............Pilot Operated, Directional Valves......................DC25-DC28 DL081..............Manual, Poppet-Type, 2-Way Valves.....................DC1-DC3 DL101..............Manual, Poppet-Type, 2-Way Valves.....................DC4-DC6 DL102..............Manual, Spool-Type, 2-Way Valves.......................DC7-DC9 DL103..............Manual, Spool-Type, 3-Way Valves...................DC10-DC12 DL104..............Manual, Spool-Type, 4-Way Valves...................DC13-DC15 DM103.............Manual, Rotary, 3-Way Valves...........................DC16-DC18 DM104.............Manual, Rotary, 4-Way Valves...........................DC19-DC21 DPR083B..........Sol. Operated, Proportional Pres. Reducing......PV36-PV39 DPR083C..........Sol. Operated, Proportional Pres. Reducing......PV40-PV43 DPR083C30......Sol. Operated, Proportional Pres. Reducing......PV44-PV47 DPR083N.........Sol. Operated, Proportional Pres. Reducing......PV48-PV51 DPR103C..........Sol. Operated, Proportional Pres. Reducing......PV52-PV55DPR104C10......Sol. Operated, Proportional Pres. Reducing......PV56-PV59 DS085..............Solenoid, Spool-Type, 4-Way, 3-Pos.............DC127-DC130 DS086C6Mand 096............Sol., Bi-Directional, Poppet-Type, 2-Way.......DC148-DC151 DS105..............Solenoid, Spool-Type, 4-Way, 3-Pos.............DC131-DC134 DS161..............Solenoid, Poppet-Type, 2-Way Valves...............DC56-DC59 DS162..............Solenoid, Spool-Type, 2-Way Valves.................DC84-DC87 DS123B............Solenoid, Spool-Type, 3-Way Valves.............DC104-DC106 DS163..............Solenoid, Spool-Type, 3-Way Valves.............DC107-DC110 DS201..............Solenoid, Poppet-Type, 2-Way Valves...............DC60-DC63 DS083BP3........Solenoid, Poppet-Type, 3-Way Valves...............DC64-DC67 DSH08D1C.......Solenoid, Poppet-Type, 2-Way Valves...........DC139-DC141 DSH08D6C.......Solenoid, Poppet-Type, 2-Way Valves...........DC145-DC147 DSH081 & 091.Solenoid, Poppet-Type, 2-Way Valves...............DC36-DC39 DSH082 & 092.Solenoid, Spool-Type, 2-Way Valves.................DC72-DC75 DSH083............Solenoid, Spool-Type, 3-Way Valves.................DC92-DC95 DSH084............Solenoid, Spool-Type, 4-Way Valves.............DC115-DC118 DSH085............Solenoid, Spool-Type, 4-Way, 3-Pos.............DC135-DC138 DSH101............Solenoid, Poppet-Type, 2-Way Valves...............DC44-DC47 DSH102............Solenoid, Spool-Type, 2-Way Valves.................DC80-DC83 DSH103............Solenoid, Spool-Type, 3-Way Valves.............DC100-DC103 DSH104............Solenoid, Spool-Type, 4-Way Valves.............DC123-DC126 DSH106C6........Sol., Bi-Directional, Poppet-Type, 2-Way.......DC156-DC159 DSH121............Solenoid, Poppet-Type, 2-Way Valves...............DC52-DC55 DSL08D6C........Sol., Bi-Directional, Poppet-Type, 2-Way.......DC142-DC144 DSL080DC........Soft Seat, Direct Act., Poppet-Type, 2-Way.......DC29-DC31 DSL081 & 091.Solenoid, Poppet-Type, 2-Way Valves...............DC32-DC35 DSL082 & 092.Solenoid, Spool-Type, 2-Way Valves.................DC68-DC71 DSL083............Solenoid, Spool-Type, 3-Way Valves.................DC88-DC91 DSL084............Solenoid, Spool-Type, 4-Way Valves.............DC111-DC114 DSL101............Solenoid, Poppet-Type, 2-Way Valves...............DC40-DC43 DSL102............Solenoid, Spool-Type, 2-Way Valves.................DC76-DC79 DSL103............Solenoid, Spool-Type, 3-Way Valves.................DC96-DC99 DSL104............Solenoid, Spool-Type, 4-Way Valves.............DC119-DC122 DSL106C6........Sol., Bi-Directional, Poppet-Type, 2-Way.......DC152-DC155 DSL121............Solenoid, Poppet-Type, 2-Way Valves...............DC48-DC51 EHVC................Electrohydraulic Valve Controller.......................PV92-PV99 ERV091C..........Solenoid Operated, Proportional P.C.................PV60-PV63 ERV091N..........Solenoid Operated, Proportional P.C.................PV64-PV67 ERV092N..........Solenoid Operated, Proportional P.C.................PV68-PV71 ERV101C..........Solenoid Operated, Proportional P.C.................PV72-PV75 ERV101N..........Solenoid Operated, Proportional P.C.................PV76-PV79 ERV102N..........Solenoid Operated, Proportional P.C.................PV80-PV83 ERV121N..........Solenoid Operated, Proportional P.C.................PV84-PV87 ERV161N..........Solenoid Operated, Proportional P.C.................PV88-PV91 FA101...............Pressure Compensated Flow Control................VC16-VC18 FC101...............Pressure Compensated Flow Control................VC22-VC24 FCP101.............Priority-Type, P.C. Valves...................................VC38-VC40 FCPH121..........Priority-Type, P.C. Valves...................................VC41-VC43 FCR101............Restrictive-Type, P.C. Valves..............................VC29-VC31 FCR121............Restrictive-Type, P.C. Valves..............................VC32-VC34 FCR161............Restrictive-Type, P.C. Valves..............................VC35-VC37 FDC101............Flow Divider/Combiner Valves...........................VC19-VC21 FL101...............Filter Cartridge.....................................................MV7-MV9 FP101...............Priority-Type, P.C. Flow Control Valves..............VC47-VC50 FPR101............Priority-Type, P.C. Flow Control Valves..............VC51-VC53 FR101...............Restrictive-Type, P.C. Flow Control Valves.........VC44-VC46FV101 & 102 .... Flow Control Valves ........................................... VC25-VC28 HLSVH101........Hi-Lo Unloading Valve.....................................MV10-MV12 HP101..............Hand Pump.....................................................MV13-MV14 NV102..............Needle Valves........................................................VC7-VC9 NV161..............Needle Valves....................................................VC10-VC12 NV162..............Needle Valves....................................................VC13-VC15 NVH081............Needle Valves........................................................VC1-VC3 NVH101............Needle Valves........................................................VC4-VC6 Offer of Sale............................................................................................TI15 P10-2*.............Cavity Plugs................................................................MV19 PDS101............Pressure Sensing..............................................PC67-PC69 PDS161............Pressure Sensing..............................................PC70-PC72 PMK101...........Panel Mount Kit..........................................................MV18 PN 812724.......Block Off Plate............................................................MV20 PR103..............Pressure Reducing/Relieving Valves.................PC91-PC93 PRCH101..........Pressure Reducing/Relieving Valves With.........................PC79-PC81PRH081............P.O. Pressure Reducing/Relieving Valves..........PC73-PC75 PRH082............P.O. Pressure Reducing Valves..........................PC94-PC96 PRH101............P.O. Pressure Reducing/Relieving Valves..........PC76-PC78 PRH102............P.O. Pressure Reducing Valves..........................PC97-PC99 PRH121............P.O. Pressure Reducing/Relieving Valves..........PC82-PC84 PRH121V..........P.O. Pressure Reducing/Relieving Valves..........PC85-PC87 PRH122............P.O. Pressure Reducing Valves......................PC100-PC102 PRH161............P.O. Pressure Reducing/Relieving Valves..........PC88-PC90 PRH162............P.O. Pressure Reducing Valves......................PC103-PC105PRS102............Pressure Reducing Spool Valves...................PC106-PC108PRS162............Pressure Reducing Spool Valves...................PC109-PC111 RAH081 & 091.P.O. Relief Valves...............................................PC49-PC51 RAH101............P.O. Relief Valves...............................................PC52-PC54 RAH101V..........P.O. Ventable Relief Valves................................PC55-PC57 RAH121............P.O. Relief Valves...............................................PC58-PC60 RAH161............P.O. Relief Valves...............................................PC61-PC63 RAH201............P.O. Relief Valves...............................................PC64-PC66 RASPH21.........Subplate/Relief Valve...........................................MV1-MV3 RASPH31.........Subplate/Relief Valve...........................................MV4-MV6 RD042..............Direct Acting Relief Valves.....................................PC7-PC9 RD072..............Direct Acting Relief Valves.................................PC13-PC15 RD102..............Direct Acting Relief Valves.................................PC19-PC21 RD163..............Direct Acting Relief Valves.................................PC31-PC33 RDH062............Direct Acting Relief Valves.................................PC10-PC12 RDH081............Direct Acting Relief Valves.....................................PC1-PC3 RDH082............Direct Acting Relief Valves.................................PC16-PC18 RDH083............Direct Acting Relief Valves.................................PC22-PC24 RDH101............Direct Acting Relief Valves.....................................PC4-PC6 RDH103............Direct Acting Relief Valves.................................PC25-PC27 RDH104............Differential Relief Valves With..........................................PC34-PC36 RDCH103.........Direct Acting Relief Valves With..........................................PC28-PC30PC139-PC141 SVCH101..........Sequence Valves w/Free Rev. Flow Check.....PC118-PC120 SVH081............Sequence Valves............................................PC112-PC114 SVH082............P.O. Sequence Valves....................................PC127-PC129 SVH101............Sequence Valves............................................PC115-PC117 SVH102............P.O. Sequence Valves....................................PC130-PC132 SVH121............Sequence Valves............................................PC121-PC12308 & 09............Coils 1/2″ I.D..........................................................CL1-CL2 DF102P &DPR104C10......Coils 1/2″ I.D..........................................................CL3-CL4 10, 12,16 & 20............Coils 5/8″ I.D..........................................................CL5-CL6 12 & 16............Coils 1″ I.D.............................................................CL7-CL8 08 & 09............Unicoils 1/2″ I.D...................................................CL9-CL10 10 & 12............Unicoils 5/8″ I.D.................................................CL11-CL12 08 & 09............Waterproof Coils 1/2″ I.D............................................CL13 10 & 12............Waterproof Coils 5/8″ I.D............................................CL14 Installation Data.........................................................................................TI1 04.....................Two and Three Way Cavity Details..................................TI206.....................Two and Three Way Cavity Details..................................TI307.....................Two and Three Way Cavity Details..................................TI408.....................Two, Three and Four Way Cavity Details...................TI5-TI609.....................Two Way Cavity Detail....................................................TI710.....................Two, Three and Four Way Cavity Details...................TI8-TI9 12.....................Two, Three and Four Way Cavity Details...............TI10-TI11 16.....................Two, Three and Four Way Cavity Details...............TI12-TI13 20.....................Two Way Cavity Detail..................................................TI14 B04-2**...........Single Function, Two Step Bodies.........................VB1-VB2 B04-3**...........Single Function, Three Step Bodies.......................VB3-VB4 B06-2**...........Single Function, Two Step Bodies.........................VB5-VB6 B06-3**...........Single Function, Three Step Bodies.......................VB7-VB8 B07-2**...........Single Function, Two Step Bodies.......................VB9-VB10 B07-3**...........Single Function, Three Step Bodies...................VB11-VB12 B08-2**...........Single Function, Two Step Bodies.....................VB13-VB14 B08-3**...........Single Function, Three Step Bodies...................VB15-VB16 B08-4**...........Single Function, Four Step Bodies.....................VB17-VB18 B09-2**...........Single Function, Two Step Bodies.....................VB19-VB20 B10-2**...........Single Function, Two Step Bodies.....................VB21-VB22 B10-2T**.........Single Function, Two Step Bodies.....................VB23-VB24 B10-3**...........Single Function, Three Step Bodies...................VB25-VB26 B10-3L**.........Single Function, Three Step Bodies...................VB27-VB28 B10-4**...........Single Function, Four Step Bodies.....................VB29-VB30 B12-2**...........Single Function, Two Step Bodies.....................VB31-VB32 B12-3**...........Single Function, Three Step Bodies...................VB33-VB34 B12-4**...........Single Function, Four Step Bodies.....................VB35-VB36 B16-2**...........Single Function, Two Step Bodies.....................VB37-VB38 B16-3**...........Single Function, Three Step Bodies...................VB39-VB40 B16-3S**.........Single Function, Three Step Bodies...................VB41-VB42 B20-2**...........Single Function, Two Step Bodies.....................VB43-VB44 Single Function BodiesCavity DetailsCartridge Valve CoilsSVH122............P.O. Sequence Valves....................................PC133-PC135 SVH161............Sequence Valves............................................PC124-PC126 SVH162............P.O. Sequence Valves....................................PC136-PC138 TR081..............Thermal Relief Valves....................................PC142-PC144 VF101...............Velocity Fuses....................................................VC54-VC56 XR101..............Cross-Over Relief Valves...................................PC37-PC39 XRDH101.........Cross-Over Relief Valves...................................PC40-PC42 XRDH102.........Dual Relief Valves w/Anti-Cavitation Checks......PC43-PC45 XRDH103.........Cross-Over Relief Valves...................................PC46-PC48。

Parker Hannifin MC Drive系列快速上手指南说明书

Parker Hannifin MC Drive系列快速上手指南说明书

Low Voltage Mobile DrivesMC SeriesQuick Start ManualPVD 3667e_GBParker Hannifin Manufacturing France8, avenue du Lac – CS 3074921007 DIJON CEDEXTel : +33 (0)3 80 42 41 40Fax : +33 (0)3 80 42 41 23MC Drive Series - InformationIt is the responsibility of the user to ensure end product compliance with all Europeanrequirements.The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalogue and in any other materials provided from Parker Hannifin Corporation or its subsidiaries or authorized distributors.Table of ContentMC DRIVE SERIES - INFORMATION (2)1.INTRODUCTION (4)1.1.P RODUCT D ESCRIPTION (4)1.2.P RODUCT F EATURES (4)1.3.P ART N UMBER (5)1.4.S OFTWARE (6)2.MCC (8)2.1.O VERVIEW (8)2.2.D IMENSIONS (MM) (9)2.3.C ONNECTOR WIRING (9)3.MCD (10)3.1.O VERVIEW (10)3.2.D IMENSIONS (MM) (11)3.3.C ONNECTOR WIRING (11)4.MCE & MCF (12)4.1.O VERVIEW MCE (12)4.2.O VERVIEW MCF (13)4.3.D IMENSIONS MCE&MCF(MM) (14)4.4.C ONNECTOR WIRING MCE&MCF (14)5.TYPICAL WIRING (15)APPENDIX A HIGH CURRENT CONNECTIONS (16)APPENDIX B LOW CURRENT CONNECTIONS (18)1.1. Product DescriptionParker's MC Series Mobile Inverter range provides high performance and functionality in a compact package for mobile motor control applications from 24 to 96 VDC. Compatible with multiple asynchronous motor manufacturers, the MC series settings can be optimized with supplied configuration software. Each inverter provides system control capabilities such as analogue and digital inputs and outputs, contactor coil drivers and proportional valve drivers.1.2. Product Features∙Advanced field oriented vector control∙Auto-configuration of typical induction motors∙High efficiency cold plate heat sink design∙High frequency MOSFET power stages∙IP 65 protection class∙Motor temp sensor input∙Encoder supply output (5V)∙Auxiliary supply (+5V, +12V)∙AB encoder input∙Dual, configurable throttle inputs∙Configurable CAN communication∙Parker IQAN compatible∙Ability to control vehicle control tasks separately from motor control∙ 5 configurable coil drive outputs∙ 2 configurable digital outputs∙ 2 Analogue inputs∙ 6 Digital inputs1.3. Part Number1.4. SoftwareMC Configuration Manager Software•PC-based programming•System monitoring•System diagnostics•Adjust system variables and programmable parameters •Online or offline use•Windows XP/Vista/7 compatible•Includes USB adaptorTo be able to configure an MC Inverter, a software and connecting devices are required as shown hereunder (1319 at the moment).Its part number is USB-MC-00.To connect the 1319 to the MC inverter, a specific cable is required.It is made with a 35 pins Tyco connector on one side to be connected to the inverter and with a 4 pins Molex connector to be connected with the 1319 on the other.Parker is proposing such a cable that is 1m long : MCINVERTER-LINK-CABLE.In case of other length requirements, you will find hereunder the different components required to make such a cable :Side 35 pins Tyco connector :(see Appendix B) Pins : 770520-3Crimp Plier : 58529-1Crimp tool : 58529-2Side 4 pins Molex : Plug Housing : 39-01-2046Pin : 39-00-0082Crimp Plier : 63819-0900bottom viewUSB-MC-001319 Software2.1. Overview2.2. Dimensions (mm)2.3. Connector wiringø7E NCNOT C AN3.1. Overview3.2. Dimensions (mm)3.3. Connector wiring7DIA 4P LAC E SE AD E SE NCANA C AN4.1. Overview MCE4.2. Overview MCF4.3. Dimensions MCE & MCF (mm)4.4. Connector wiring MCE & MCFAPPENDIX A HIGH CURRENT CONNECTIONS There are five high-current terminals, identified on the controller housing asB+, B-, U, V, and W.Lug assembly: MCC and MCD modelsFive aluminum M6 terminals are provided. Lugs should be installed as follows, using M6 bolts sized to provide proper engagement (see diagram):• Place the lug on top of the aluminum terminal, followed bya high-load safety washer with its convex side on top. Thewasher should be a SCHNORR 416320, or equivalent.• If two lugs are used on the same terminal, stack them so thelug carrying the least current is on top.• Tighten the assembly to 10.2 ±1.1 N·m (90 ±10 in-lbs).Lug assembly: MCE and MCF modelsFive brass M8 terminals are provided. Lugs should be installed as follows, usingM8 bolts sized to provide proper engagement (see diagram):• Place the lug on top of the terminal, followed by a safetywasher with its convex side on top. The washer should be aSCHNORR 700800, or equivalent.• If two lugs are used on the same terminal, stack them so thelug carrying the least current is on top.• Tighten the assembly to 9.6 ±0.9 N·m (85 ±8 in-lbs).Note: The terminals may rotate up to ±5° in the cover.High current wiring recommendations: all modelsBattery cables (B+, B-)These two cables should be run close to each other between the controllerand the battery. Use high quality copper lugs and observe the recommendedtorque ratings. For best noise immunity the cables should not run across thecenter section of the controller. With multiple high current controllers, use astar ground from the battery B- terminal.Motor wiring (U, V, W)The three phase wires should be close to the same length and bundled togetheras they run between the controller and the motor. The cable lengths should bekept as short as possible. Use high quality copper lugs and observe the recommended torque ratings. For best noise immunity the motor cables should notrun across the center section of the controller. In applications that seek the lowest possible emissions, a shield can be placed around the bundled motor cables and connected to the B- terminal at the controller. Typical installations will readilypass the emissions standards without a shield. Low current signal wires shouldnot be run parallel to the motor cables. When necessary they should cross themotor cables at a right angle to minimize noise coupling.APPENDIX B LOW CURRENT CONNECTIONSAll low power connections are made through a single 35-pin connector.The connector will accept 20 to 16 AWG wire with a 1.7 to 2.7mm diameter thin-wall insulation.The 35 individual pins are characterized in Table 2.Low current wiring recommendationsMotor encoder (Pins 31, 32)All four encoder wires should be bundled together as they run between themotor and controller logic connector. These can often be run with the rest ofthe low current wiring harness. The encoder cables should not be run nearthe motor cables. In applications where this is necessary, shielded cable shouldbe used with the ground shield connected to the I/O ground (pin 7) at onlythe controller side. In extreme applications, common mode filters (e.g. ferritebeads) could be used.CAN bus (Pins 21, 23, 34, 35)It is recommended that the CAN wires be run as a twisted pair. However,many successful applications at 125 kBaud are run without twisting, simplyusing two lines bundled in with the rest of the low current wiring. CAN wiringshould be kept away from the high current cables and cross it at right angleswhen necessary.All other low current wiringThe remaining low current wiring should be run according to standard practices.Running low current wiring parallel to the high current wiring should alwaysbe avoided, and cross it at right angles when necessary.Table 2.P IN NAME DE S C R IP TION1K S I K eys witch input.P rovides logic power forthe controller and powerfor the coil drivers.2P rop.Driver P roportional driver.This is a coil driver withcurrent control capabilitytypically used for aproportional valve on ahydraulic manifold.C an also be used as adigital input.3Driver4G eneric driver#4;canalso be used as a digitalinput.Has low frequencyP WM capabilities.4Driver3G eneric driver#3;canalso be used as a digitalinput.Has low frequencyP WM capabilities.T ypicallyused for pump contactor. 5Driver2G eneric driver#2;canalso be used as a digitalinput.Has low frequencyP WM capabilities and aslightly higher currentrating.T ypically used forelectromagnetic brake. 6Driver1G eneric driver#1;canalso be used as a digitalinput.Has low frequencyP WM capabilities.T ypically used for maincontactor.7I/O G round Input and output groundreference.8S witch2C an be used as generic Analog2s witch input#2or asgeneric analog input#2.T ypically used as themotor temperatureanalog input.9S witch3G eneric s witch input#3.T ypically used as theinterlock s witch.10S witch4G eneric s witch input#4. 11S witch5G eneric s witch input#5.12S witch6G eneric s witch input#6.13C oil R eturn This is the coil return pin(at B+potential)for allthe contactor coils.14S witch16/DNC In the1234,this isgeneric s witch input#16.In the1236and1238,Do Not C onnect.15Throttle P ot High P ot high connection fora3-wire throttle pot.16Throttle P ot Wiper P ot wiper connection forthe throttle pot.17P ot2Wiper P ot wiper connection forthe brake pot.18P ot Low C ommon pot lowconnection for the throttleand brake pots.19Digital Out6An open collector digitaloutput.C an also be usedas a digital input.20Digital Out7An open collector digitaloutput.C an also be usedas a digital input.21C AN T erm H High connection for theC AN termination jumper. 22S witch7G eneric s witch input#7.T ypically used as theF orward s witch.23C ANH C AN bus high.24S witch1C an be used as generic Analog1s witch input#1or asgeneric analog input#1.T ypically used foremergency reverse s witch(if applicable).25+12V Out Unregulated low power+12V output.26+5V Out R egulated low power+5V output.27P ot2High P ot high connection fora3-wire brake pot.P IN NAME DE S C R IP TION16FEBRU A RY2008D RA FTP IN NAME DE S C R IP TION28S erial TX S erial transmit line fordisplay orflash update.29S erial R X S erial receive line forflash update.30Analog Output*Low power,low frequency0–10V analog output.31E ncoder A Quadrature encoderinput phase A.32E ncoder B Quadrature encoderinput phase B.33S witch8G eneric s witch input#8.T ypically used as theR everse s witch.34C AN T erm L Low connection for theC AN bus terminationjumper.35C ANL C AN bus low.*P in30not connected on MC Ccontrollers.urtis1232/34/36/38Manual,O S1411。

Henny Penny 岛战暖器 HMI-103 105 技术手册说明书

Henny Penny 岛战暖器 HMI-103 105 技术手册说明书

If a problem occurs during the first operation of a new cabinet, recheck the Installation Section of the Operator’s Manual.
Before troubleshooting always recheck the Operating Instructions Section of the Operator’s manual.
Section 3. PARTS INFORMATION..............................................................................................3-1 3-1. Introduction ........................................................................................................ 3-1 3-2. Genuine Parts......................................................................................................3-1 3-3. When Ordering Parts .......................................................................................... 3-1 3-4. Prices .................................................................................................................. 3-1 3-5. Delivery .............................................................................................................. 3-1 3-6. Warranty ............................................................................................................. 3-1 3-7. Recommended Spare Parts for Distributors ....................................................... 3-1
哈特科电子热水器MC系列产品说明书

哈特科电子热水器MC系列产品说明书

M C R P -09032P r i n t e d i n U .S .A .M C R P -09033P r i n t e d*N o t e : S .S .i s a n a b b r e v i a t i o n f o r s t a i n l e s s s t e e l.M C R P -09034P r i n t e dM C R P -09035P r i n t e dM C R P -09036P r i n t e dN O T E SM C R P -09037P r i n t e dN O T E SHATCO CORPORATIONP.O. Box 340500, Milwaukee, WI 53234-0500 U.S.A.(800) 558-0607 (414) 671-6350Parts &Service Fax (800) 690-2966 Int’l. Fax (414) 671-3976HATCO AUTHORIZED PARTS DISTRIBUTORSALABAMAJones McLeod Appl. Svc.Birmingham 205-251-0159ARIZONAAuth. Comm. Food Equip.Phoenix 602-234-2443Byassee Equipment Co.Phoenix 602-252-0402CALIFORNIA Industrial Electric Huntington Beach714-379-7100Chapman Appl. Service San Diego 619-298-7106P & D Appliance S. San Francisco 650-635-1900COLORADOHawkins Commercial Appliance Englewood 303-781-5548DELAWAREFood Equipment Service Wilmington 302-996-9363FLORIDAWhaley Foodservice Repair Jacksonville 904-725-7800Nass Service Co., Inc.Orlando 407-425-2681B.G.S.I.Pompano Beach954-971-0456Comm. Appliance Service Tampa 813-663-0313GEORGIA Adcox Service Co.Atlanta404-361-8010Southeastern Rest. Svc.Norcross 770-446-6177HAWAIIBurney’s Comm. Service, Inc.Honolulu 808-848-1466Food Equip Parts & Service Honolulu 808-847-4871ILLINOIS Parts Town Lombard708-865-7278Eichenauer Elec. Service Decatur 217-429-4229Midwest Elec. Appl. Service Elmhurst 630-279-8000Cone’s Repair Service Moline 309-797-5323INDIANA GCS Service Indianapolis317-545-9655IOWAElectric Motor Service Co.Davenport 319-323-1823KENTUCKY GCS Service Louisville 502-367-1788LOUISIANAChandlers Parts & Service Baton Rouge 225-272-6620Bana Comm. Parts, Inc.Shreveport 318-631-6550MARYLANDElectric Motor Service Baltimore 410-467-8080GCS Service Silver Spring 301-585-7550MASSACHUSETTSAce Service Co., Inc.Needham 781-449-4220MICHIGANCommercial Kitchen Service Bay City 517-893-4561Bildons Appliance Service Detroit 248-478-3320Midwest Food Equip. Service Grandville 616-261-2000MINNESOTA GCS Service Minneapolis 612-546-4221MISSOURI GCS Service Kansas City816-920-5999Commercial Kitchen Services St. Louis 314-890-0700Kaemmerlen Parts & Service St. Louis 314-535-2222NEBRASKA Anderson Electric Omaha 402-341-1414NEVADABurney’s Commercial Las Vegas 702-736-0006Hi. Tech Commercial Service N. Las Vegas 702-649-4616NEW JERSEY Jay Hill Repair Fairfield 973-575-9145Service Plus Flanders 973-691-6300NEW YORKAcme American Repairs, Inc.Brooklyn 718-456-6544NEW YORK (continued)Alpro Service Co.Brooklyn718-386-2515Appliance Installation Buffalo 716-884-7425Northern Parts Dist.Plattsburgh 518-563-3200J. B. Brady, Inc.Syracuse315-422-9271NORTH CAROLINAAuthorized Appliance Charlotte 704-377-4501OHIOAkron/Canton Comm. Svc. Inc.Akron 330-753-6635Certified Service Center Cincinnati 513-772-6600GCS Service Columbus614-476-3225Electrical Appl. Repair Service Independence 216-459-8700E. A. Wichman Co.Toledo 419-385-9121OKLAHOMAHagar Rest. Service, Inc.Oklahoma City 405-235-2184Krueger, Inc.Oklahoma City 405-528-8883OREGONBressie Electric Co.Portland503-231-7171Ron’s Service, Inc.Portland 503-624-0890PENNSYLVANIAFAST Comm. Appl. Service Philadelphia 215-288-4800GCS Service Pittsburgh 412-787-1970K & D Service Co.Harrisburg717-236-9039Elmer Schultz Services Philadelphia 215-627-5401Electric Repair Co.Reading 610-376-5444RHODE ISLANDMarshall Electric Co.Providence 401-331-1163SOUTH CAROLINAWhaley Foodservice Repair W. Columbia 803-791-4420TENNESSEE Camp Electric Memphis901-527-7543TEXASStove Parts Supply Fort Worth817-831-0381Armstrong Repair Service Houston 713-666-7100Commercial Kitchen Repair Co.San Antonio 210-735-2811San Antonio Rest. Equip.San Antonio 210-532-1660UTAH GCS Service Salt Lake City 801-487-3653VIRGINIA Daubers Norfolk 757-855-4097Daubers Springfield 703-866-3600WASHINGTONRestaurant Appl. Service Seattle 206-524-8200WISCONSIN A.S.C., Inc.Madison 608-246-3160A.S.C., waukee414-543-6460CANADABRITISH COLUMBIAKey Food Equipment Service Vancouver 604-433-4484ONTARIOR.G. Henderson Ltd.Toronto 416-422-5580Choquette CKS Ottawa 613-739-8458QUÉBEC Choquette CKS Montreal 514-722-2000Choquette CKS Québec City418-681-3944。