SUNITEC Premium BC980SAUSER MANUAL1 2USB car charger USB charging cable3 4User manual Warranty cardSUNITEC Premium BC980SA 1/LED indicator lightSun Visor ClipON/OFFVolume+ Charging portVolume-SpeakerMute button MicrophoneSUNITEC Premium BC980SA 2SUNITEC PremiumBC980SANOTE : After the SUNITEC PREMIUM BC980SA and a mobile phonebeen paired they will automatically connect whenever the SUNITECPREMIUM BC98 s switched on and the mobile phone has bluetoothactivated and is within range.SUNITECConnect the SUNITEC PREMIUM BC980SA to any available USB slot onSUNITEC Premium BC980SA 7USING THE SUNITEC PREMIUM BC980SAWITH YOUR MOBILE PHONESUNITEC Premium BC980SA 8WHAT THE LIGHTS MEAN DECLARATION of CONFORMITYThe company Sunitec Electronics Limited, declares that product BC980SAcomplies with the essential requirement of the 2014/53/EU.The declaration of conformity in complete form is available at theheadquarters of Sunitec Electronics Limited.Product sold in the US and Product sold in the European communityManufactured by Sunitec Electronics Limited. MADE IN CHINA Button Function OperationMulti-function buttonAnswer a call Tap the onceReject a call Double-Tap theEnd a call Tap the onceRedial last number Double-tap theActivate Siri / othervoice control software Tap the onceSpeaker volumeup/downPress and hold theorSkip forward Tap theSkip backward Tap theTransfer call fromSUNITEC BC980SAto m obile phonePresstogetherandWeb : : ********************: +86-755-36863386 / 36863387 / 36863389For FAQs and more information, please visit :SUNITEC PREMIUM CAR KITMODEL: BC980SAFCC Caution.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.。
NETGEAR, Inc.350 East Plumeria Drive San Jose, CA 95134 USA2014 年 5 月商标NETGEAR 、NETGEAR 徽标、Connect with Innovation 是 NETGEAR, Inc. 和/或其子公司在美国和/或其他国家/地区使用的商标和/或注册商标。
信息如有变更，恕不另行通知。
© NETGEAR, Inc. 保留所有权利。
合规性如需最新的欧盟符合性声明，请访问：/app/answers/detail/a_id/11621/。
有关法规遵从性信息，请访问：/about/regulatory/。
连接电源之前，请查阅合规性文件。
技术支持感谢您选择 NETGEAR 产品。
安装设备后，请找到产品标签上的序列号并使用它在 https:// 上注册产品。
只有在注册产品后，才能使用 NETGEAR 电话支持。
NETGEAR 建议通过 NETGEAR 网站注册产品。
如需联系 NETGEAR 支持部门，请访问：/general/contact 或致电（仅限美国） 1-888-NETGEAR 。
在其他国家/地区，请访问：/general/contact/default.aspx 查看电话 号码。
如需产品更新和网络支持，请访问 。
NETGEAR 建议您只使用 NETGEAR 官方支持资源。
可通过产品的用户界面中的链接或 在线获取用户手册。
客服热线：400-830-3815电子邮件支持：**********************中文技术支持站点：/ 网件社区：您可以使用这些图解来连接您的无线接入点，或遵循本手册中的详细说明。
选项 11. 为您的网络配置接入点。
如需了解更多信息，请参阅第 2 页上的设置接入点。
2. 将您的调制解调器连接到 Internet 。
3. 将调制解调器连接至接入点背后的 LAN 端口。
选项 21. 为您的网络配置接入点。
WIFI+网口版设备使用手册V1.5北京聚英翱翔电子有限责任公司版本说明版本说明V1.11、初始版本。
V1.21、增加了新版复位按钮说明。
V1.31、增加了新版TCP连接软件测试说明，不再需要使用虚拟串口方式；2、增加了查询当前网络信息的方法说明。
V1.41、使用新版WIFI网口通讯模块；2、更新新版WIFI模式配置参数说明；3、更新新版网口模式配置参数说明。
V1.51、更新优化参数配置目录一、软件说明 (1)二、工作模式 (1)1、WIFI模式 (1)2、网口模式 (1)三、硬件说明 (1)1、默认IP (1)2、复位键 (1)四、参数配置 (2)1、WIFI参数 (2)2、网口参数 (7)五、TCP/UDP模式 (15)1、WIFI配置 (15)2、网口配置 (16)六、通讯测试 (20)1、软件测试 (20)2、Socket网络测试工具 (21)3、Modbus TCP测试 (27)七、设备地址 (32)1、使用软件 (32)2、修改方法 (32)八、PLC通讯 (32)九、技术支持 (33)一、软件说明WIFI网口设备中的WIFI通讯参数和网口通讯参数分别设置，支持两种通讯方式分别设置，支持同时通讯。
WIFI参数：◆WIFI参数通过WEB界面进行参数配置；◆设备具有独立的AP热点信号：JY_***；◆支持直连热点信号通讯控制；◆支持接入局域网WIFI网络组网通讯；◆支持TCP/UDP Client/Server模式。
网口参数：◆通过以太网配置软件进行参数配置；◆支持直连/组网通讯；◆支持TCP/UDP Client/Server模式。
二、工作模式1、WIFI模式模式说明AP使用设备本身的热点信号WiFi设备WIFI桥接入用户无线路由器的WIFI信号中1AP模式：WiFi模块作为热点，可以用电脑或者手机连接上WiFi进行通讯，默认AP的名字为JY_XXXXXX,密码为12345678，默认IP为：192.168.10.1。
