泰克推出手持示波器新品THS3000采样率高达5GS／s

Handheld OscilloscopesTHS3000 Series DatasheetWith 4 isolated channels and up to 7 hours of battery life, the lightweight THS3000 Handheld Oscilloscope Series enables you to safely makefloating or differential measurements on your bench or in the field. Now you can tackle tough environments with the performance you expect from Tektronix - safely and affordably.Key performance specifications100 MHz or 200 MHz bandwidth ModelsMaximum sample rates up to 5 GS/s and 200 ps resolution 4 fully isolated and floating channels600 V RMS CAT III, 1000 V RMS CAT II rated inputs (BNC to earth ground)Key features21 automatic measurementsWaveform math and FFT spectral analysis Volts, time, frequency, watts cursor measurements Measurement data logging with TrendPlot ™Waveform pass/fail limit testing Automatic 100 display screens recorder 6 in. (153 mm) bright color display USB device and host support 7 hours of continuous battery operationApplicationsEmbedded analog and digital designPower devices, power electronics, and power supply design Automotive and avionics design and maintenance Industrial equipment design and installation Field test and serviceAccurately measure your signalsWith up to 200 MHz bandwidth, 4 channels, and 5 GS/s maximum sample rate, no other oscilloscope offers as much bandwidth and sample rate in a portable handheld form factor. The THS3000 Handheld Oscilloscope Series has 10,000 points record length per channel, enabling you to capture more signal information at higher sample rates to clearly see signal details. For applications where it is important to measure slow-changing signals over long time periods, the THS3000 Series offers Roll mode that extends therecord length to 30,000 points of signal information.1981Four isolated input channels easily handle any type of mixed signal inputsSafely make floating and differentialmeasurementsIsolated-channel technology is specified to 1000 V RMS maximum float voltageMaking accurate and safe measurements on power electronics, power semiconductors, and other electronics applications can be challenging when the signal reference is floating and not referenced to earth ground.When your signal ranges from low voltage to high voltage (kV) or you must use probing techniques that can potentially create ground loops, the problem is compounded.To enable floating measurements, the THS3000 Series is architecturally different than most other oscilloscopes. All input channels are fully isolated from the main chassis and from each other. Additionally the power adapter and USB interface are fully isolated to ensure safe measurements and eliminate the risk of unintentional grounding or accidental short circuits.When configured with the proper probes you can be assured you'll be ableto make quick, safe, and accurate measurements.Input signal and float voltage maximum safety ratingsSelecting the right probeFast analysis of your deviceThe THS3000 Handheld Oscilloscope Series is packed with analysis tools to help you validate your device's operation and identify issues quickly. With waveform math, you can add, subtract, or multiply any of your signals to investigate instantaneous power or look at gain. Vertical and horizontal cursors allow you to look at a specific point on your waveform for accurate measurements of voltage, current, time, or frequency. With 21 automated measurements, you can make common measurements quickly andaccurately. The built-in Fast Fourier Transform (FFT) function allows you to see the frequency spectrum of your signal, revealing signal interference,crosstalk, or switching noise.Datasheet2 Find intermittent faults with TrendPlot™Analyze measurements and recordings visually or using measurement cursors Intermittent faults can be caused by timing errors, temperature changes,environmental influences, or simply broken wiring or connectors. The TrendPlot ™ function helps you find those faults by plotting minimum and maximum measurement values over time. You can select up to4 measurements and plot any combination of voltages, amps, frequency,time, and phase for any or all four inputs, all with time capture information.Automatic capture and data logging of 100 displayscreensPlayback of captured data is quick and easy with the THS3000 series oscilloscopesCapturing random or changing signals can often be difficult. The THS3000Series greatly simplifies any type of waveform data logging by continuously capturing 100 display screens. Each screen capture can include multiple channels and math waveforms, each with its own time stamp. Data capture can also be tailored to specific events by selection of qualified trigger conditions. Playback is quick and easy with the automatic replay of all captured screens or only the screens you select.Waveform limit testingUser-defined limit testing can easily identify random waveform anomaliesThe THS3000 Series can automatically monitor your signals and output Pass or Fail results by judging whether the input waveform is withinpredefined boundaries. User selections can include testing one or all input channels and automatic recording of Pass or Fail data. Data can easily be reviewed using the Replay mode or stored externally to a USB memory device.Complete solution for power measurementsEasily calculate the instantaneous power by multiplying voltage and current waveformsFor performing power measurement on motor drives, power converters/inverters, and power semiconductor devices the THS3000 Series isequipped to handle most common measurements. For basic debugging, the isolated input channels can be used with a variety of voltage and current probes. Each input channel can be configured to match the probe type and attenuation ensuring correct measurements and cursor readings. Four channels allow for easy measurements of three-phase power or simultaneous capture of digital control and power signals.Handheld Oscilloscopes – THS3000 Series 3Measurements on power conversion electronics usually require probes with higher voltage ratings. Tektronix offers a passive probe with insulation systems specifically designed for making floating measurements. The standard THP0301-X can measure up to 849 V p-p (300 V RMS ). Optional P5122 probes, when coupled with the THS3000 Series, are suitable for making measurements on 1000 V RMS devices in Category II environments,with a maximum float voltage of up to 600 V RMS relative to earth ground.Designed to make your work easierIntuitive operationThe THS3000 Handheld Oscilloscope Series has a front-panel layout and an intuitive user interface which makes the instrument easy to use, reducing learning time and increasing efficiency. For initial setup or for situations where you're constantly changing connection points, the THS3000 Series has a single-button Autoset and Autorange feature which can automatically set up the trigger system and adjust vertical and/or horizontal oscilloscope settings.Easy to useThe bright color display makes it easy for you to see the signals you're measuring. Each waveform is color coded and designed to correspond to the colors on the input probe connectors, the front-panel channel selector buttons, and the individual probes which are colored at both ends. By matching the colors during setup you'll be assured you can easily identify your waveforms.For setup assistance user messages are available in 11 user-selectable languages including English, French, German, Spanish, Portuguese, Italian,Japanese, Simplified and Traditional Chinese, Korean, and Russian.Flexible data transferTektronix OpenChoice ®desktop software extends the capabilities of your instrumentThe standard USB ports facilitate data storage, data transfer, and instrument controlThe THS3000 Series oscilloscopes come with both a USB host and USB mini port located on the side panel enabling you to quickly and easily save instrument settings, screenshots, and waveform data onto a flash device or transfer the data directly to a PC. The THS3000 Series is shipped with theTektronix OpenChoice ®desktop software, allowing you to integrate your new THS3000 Series oscilloscope into existing measurement systems and take advantage of extended functionalities in data acquisition, measurement analysis, and documentation.Versatility and portability for wherever yourjob takes youThe optional travel kit (TK) version includes a hard-sided carry case for your instrument,accessories, and storage space for a laptop PC.Datasheet4 With a battery life of 7 hours and a weight of only 4.8 lb. (2.2 kg) theTHS3000 Handheld Oscilloscope Series offers ultimate portability. Measurements taken in the lab can now be conveniently correlated with those taken in the field - all on the same instrument. Rated IP41, theTHS3000 Series features the ruggedness needed to go beyond the lab and into industrial and field environments. The optional travel kit comes with a hard-sided carrying case and useful accessories allowing you to take the THS3000 Series on the road securely and conveniently. From the lab to the field, the THS3000 Handheld Oscilloscope Series offers you the versatility of using a single, high-performance instrument suitable for a wide range of working environments.Performance you can count onIn addition to industry-leading service and support, every THS3000 Series oscilloscope comes backed with a three-year standard warranty, and ships with a Certificate of Traceable Calibration Standard.Handheld Oscilloscopes – THS3000 Series 5DatasheetSpecificationsSpecifications apply to all models unless noted otherwise.Model overviewVertical systemInput coupling AC, DCInput impedance 1 MΩ ±1%, 14 pF ±2 pFInput sensitivity range 2 mV/div to 100 v/divVertical resolution8 bitsDC gain accuracy±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/divMax BNC input voltage(1 MΩ) 300 V RMS CAT III from BNC signal to BNC shell300 V RMS CAT III from 10:1 probe tip signal to BNC and reference lead Max probe voltage (with standardTHP0301-X probe)Trace positioning±4 divisionsHorizontal systemTime base range (s/div)THS3014 2 ns to 4 sTHS3024 1 ns to 4 sDelay time range 1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger Timing accuracy±100 ppm + 0.04 divZoom Horizontally expand or compress a live or stopped waveformTrigger systemInput source Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground Main trigger modes Auto-level, Auto, Normal, and SingleTrigger coupling DC, HF reject, Noise reject (reduces sensitivity)Trigger sensitivity, internal DC0.5 divisions from DC to 5 MHz at >5 mV/divcoupledTHS3024 1 divisions >5 MHz to 200 MHz (THS3024)THS3014 1 divisions >5 MHz to 100 MHz6 Handheld Oscilloscopes – THS3000 SeriesTrigger level rangeAny channel±4.0 divisionsTrigger modesEdge Positive, negative, or dual slope on any input channel. Coupling includes DC, HF reject, and Noise rejectPulse width Trigger on channel 1, width of positive or negative pulses (glitches) that are >, <, =, or ≠ a specified period of time (resolution of0.01 div with minimum time of 50 ns)Event Trigger on n-th occurrence of trigger (N selectable from 2 to 99)Video Trigger on channel 1, line number, all lines, odd, even, or all fields on NTSC, PAL, PAL plus, and SECAM signalsNon-interlaced Trigger on channel 1, high-res non-interlaced video with line frequencies from 14 kHz to 65 kHzAcquisition modesSample (default)Acquire sampled valuesGlitch detect Captures high frequency or glitches as narrow as 8 ns from 5 μs to 120 s / divAveraging Selectable from 2, 4, 8, or 64 waveformsRoll Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/divData recorder Automatic data logging of 100 triggered records (screens) with date and time stamp. store internally or to a USB device Waveform compare Visually compare against user-definable reference waveforms or perform automatic pass or fail testing of 1 to 4 channels with datalogging of test resultsAutomatic setupAutoset Single-button, automatic setup of all channels for vertical, horizontal, and trigger systemsAutorange Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changesWaveform measurementsCursors Time, freq (1/T), volts, watts, Rise/Fall time from any input channel or math waveformAutomatic measurements21. Up to 4 can be displayed on-screen at any one time. Measurements include:V DC, V AC RMS, V AC+DC, V Peak Max, V Peak Min, Peak to Peak, A DC, A AC, A AC+DC, Frequency, Rise time (using cursors), Falltime (using cursors), Phase (between any 2 inputs), Positive pulse width, Negative pulse width, Positive duty cycle, Negative dutycycle, dBV, dBm into 50 Ω and 600 ΩTrendPlot™Records and graphically displays any 4 automatic scope measurements. store internally or to USB flash drive for recall and analysis Waveform mathArithmetic Add, subtract, and multiply waveformsFFT Spectral magnitude. Set FFT vertical scale to Linear or Logarithmic, and FFT window to Automatic, Hamming, Hanning, or None 7DatasheetDisplay systemDisplay type 6 in. (153 mm) liquid-crystal color displayDisplay resolution320 horizontal × 240 vertical pixelsWaveform style Vectors (dot-join), Dots, Envelope, Variable persistence, Infinite persistenceDisplay format YT and XYStorage memoryReference 4 user-definable reference tracesWaveform Stores 30 internal scope records (4 traces each) with screen image and corresponding setupRecording Store 10 internal recordings that can be a 100-screen replay sequence, a roll-mode recording, or a TrendPlot™ measurementrecordingScreen image Store up to 9 internally or 256 BMP images to an external USB storage driveReal-time clock Time and date stamp of all stored dataInput/Output portsUSB host port Supports USB mass storage devicesUSB device port Mini-USB-B connector allows for communication/control of oscilloscopeProbe compensator output Side-panel output –Amplitude 1.225 V p-pFrequency500 HzKensignton-style lock Side-panel security slot connects to standard Kensington-style lockSoftwareOpenChoice® Desktop Enables fast and easy communication between a windows PC and the THS3000 series. Transfer and save settings, waveforms,and screen imagesPower sourceBattery7 hour, 10.8 v rechargeable Li-Ion batteryBattery charging time 5 hoursLine power AC power adapter/chargerPower source voltage100 v to 240 v AC ±10%Power source frequency50 hz to 60 hz8 Handheld Oscilloscopes – THS3000 Series Physical characteristicsDimensionHeight265 mm (10.5 in.)Width190 mm (7.5 in.)Depth70 mm (2.8 in.)WeightNet 2.2 kg (4.8 lb.)Shipping (base model) 4.7 kg (10.4 lb.)Shipping (TK model)7.8 kg (17.1 lb.)EnvironmentalEnclosure IP 41 according to IEC60529STemperatureOperating0 °C to +40 °C (with battery)0 °C to +50 °C (without battery)Nonoperating–20 °C to +60 °CHumidityOperating0 °C to 10 °C, noncondensing10 °C to 30 °C, up to 95% relative humidity30 °C to 40 °C, up to 75% relative humidity40 °C to 50 °C, up to 45% relative humidityNonoperating–20 °C to 60 °C, relative humidity, noncondensingAltitudeOperating Up to 3,000 m (9,843 ft.)Nonoperating Up to 12,000 m (39,370 ft.)Vibration/ShockOperating Vibration (Sinusoidal): 3 g max, according to MIL-PRF-28800F, class 2Shock: 30 g max, according to MIL-PRF-28800F, class 2Nonoperating Vibration (Random): 0.03 g2/Hz, according to MIL-PRF-28800F, class 2RegulatoryElectromagnetic compatibility EN 61326-1:2006, EN 61326-2-1:2006 for emission and immunitySafety UL61010-1:2004; CAN/CSA C22.2 No. 61010.1-04; EN61010-1:2001, Pollution degree 2; ANSI/ISA-82.02.01 9DatasheetOrdering informationTHS3000 modelsTHS3014100 MHz, 2.5 GS/s, 4-channel handheld oscilloscopeTHS3014-TK100 MHz, 2.5 GS/s, 4-channel handheld oscilloscope with travel kitTHS3024200 MHz, 5 GS/s, 4-channel handheld oscilloscopeTHS3024-TK200 MHz, 5 GS/s, 4-channel handheld oscilloscope with travel kitAll models include: THP0301-Y/B/M/G 300 MHz 10X passive probes, lithium-ion battery with 7-hour battery life, carrying handle, hanging strap, USB-A to mini USB-B cable for PC communication, Installation/Safety manual, documentation CD 1, AC power adapter with power cord, ACHHS soft-sided carry case (standard with non-TK, optional for -TK models), OpenChoice® desktop PC communication software, calibration certificate documenting traceability to national metrology institute(s) and ISO9001 quality system registration, three-year warranty.TK models also include: hard-sided travel case (instead of soft case), soft-sided probe case, 2 probe replacement accessory kits.Please specify power plug when orderingWarrantyThree-year warranty covering all parts and labor, excluding probes.Instrument optionsInternational power plugsOpt. A0North America power plug (115 V, 60 Hz)Opt. A1Universal Euro power plug (220 V, 50 Hz)Opt. A2United Kingdom power plug (240 V, 50 Hz)Opt. A3Australia power plug (240 V, 50 Hz)Opt. A4North America power plug (240 V, 50 Hz)Opt. A5Switzerland power plug (220 V, 50 Hz)Opt. A6Japan power plug (100 V, 110/120 V, 60 Hz)Opt. A10China power plug (50 Hz)Opt. A11India power plug (50 Hz)Service optionsOpt. SILV400Standard warranty extended to 5 years1Documentation CD available in English, German, Korean, Japanese, Simplified Chinese, Traditional Chinese, and Russian (063-4379-xx).10 Handheld Oscilloscopes – THS3000 Series Recommended accessoriesAccessoriesProbesTektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.2One probe comes standard with the instrument.3The P5150 is fully compatible with THS oscilloscopes, but 50X vertical scaling is not offered. 11DatasheetASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835*Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835*Brazil +55 (11) 3759 7627 Canada180****9200Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401Finland +41 52 675 3777 France 00800 2255 4835*Germany 00800 2255 4835*Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835*Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835*Norway 800 16098People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777Spain 00800 2255 4835*Sweden 00800 2255 4835*Switzerland 00800 2255 4835*Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835*USA180****9200* European toll-free number. If not accessible, call: +41 52 675 3777 Updated 10 April 2013 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit . Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and pricechange privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.19 Apr 20133GW-27121-5 。

手持式示波器THS3000系列产品技术资料主要特点和优点主要性能指标100 MHz或200 MHz带宽型号高达5 GS/s的最大采样率，200 ps分辨率4条全面隔离的浮动通道600 V RMS CAT III, 1000 V RMS CAT II等级输入(BNC到接地)测量和分析21种自动测量波形数学运算和FFT频谱分析电压、时间、频率、功率光标测量应用功能TrendPlot TM记录测量数据波形通过/失败极限测试100屏自动显示屏记录程序易用功能6英寸(153 mm)明亮的彩色显示器USB设备端口和主控端口电池可连续工作7个小时应用嵌入式模拟和数字设计电源器件、电源电子和电源设计汽车和航空设计和维护工用设备设计和安装现场测试和服务产品技术资料4条隔离输入通道，简便地处理任何类型的混合信号输入。

便于携带，处理挑战性环境THS3000手持式示波器系列重量轻，拥有4条隔离通道，电池可连续工作长达7个小时，能够安全地在工作台或在现场进行浮动测量或差分测量。

现在，您可以获得预期泰克提供的优异性能，安全经济地处理棘手的环境。

准确地测量信号THS3000手持式示波器拥有高达200 MHz的带宽、4条通道和5 GS/s的最大采样率，没有任何其它示波器能够在这样一台便携式仪器中，提供如此高的带宽和采样率。

THS3000手持式示波器系列每条通道提供了10,000点的记录长度，可以以更高的采样率捕获更多的信号信息，清楚地查看信号细节。

对必需测量在长时间内变化的低速信号的应用，THS3000系列提供了滚动模式，把记录长度扩展到30,000点信号信息。

安全地进行浮动测量和差分测量在电源电子、电源半导体和其它电子应用上进行准确安全的测量，在信号参考点浮动或没有参考接地时可能极具挑战性。

在信号覆盖从低压到高压(kV)范围或必须使用保护技术，可能产生地面环路时，问题会变得非常复杂。

为实现浮动测量，THS3000系列在结构上不同于其它大多数示波器。

THS3000系列：手持示波器
佚名
【期刊名称】《世界电子元器件》
【年(卷),期】2012(000)001
【摘要】泰克公司推出THS3000系列手持示波器，为需要在现场和实验室环境中涧试、安装和维修复杂电子系统的工程师和技术人员，提供了较好的测量准确性和精确度
【总页数】1页(P37-37)
【正文语种】中文
【中图分类】TM935.3
【相关文献】
1.泰克发布THS3000系列手持示波器 [J],
2.泰克推出手持示波器新品THS3000采样率高达5GS／s [J],
3.罗德瓶茨推出R＆S RTH系列新世代手持示波器 [J], ;
4.泰克拓展产品家族发布手持示波器凭借高达5GS/s的采样率,THS3000系列为便携式应用提供了更高水平的测试精度 [J],
5.泰克拓展产品家族发布手持示波器凭借高达5GS/s的采样率,THS3000系列为便携式应用提供了更高水平的测试精度 [J],
因版权原因，仅展示原文概要，查看原文内容请购买。

数据手册-2018.04SDS3000X 系列智能示波器数据手册产品综述SDS3000X 系列智能示波器，最大带宽 1GHz，最高实时采样率 4GSa/s，采用创新的 SPO 技术，支持高刷新、256级波形辉度等级及色温显示、数字触发和深存储特性；采用单芯片 ADC，具备优异的模拟前端和信号保真度；支持丰富的智能触发、串行协议触发和解码；支持历史模式（History）、顺序模式（Sequence）、高级波形搜索和分析（WaveScan）、趋势图（Trend）、参数直方图（Histicons）、增强分辨率模式（Eres）；具备丰富的测量和数学运算功能；具备独特的综合归档功能（LabNoteBook）；支持16路数字通道；集成 25MHz 函数 / 任意波形发生器；配备 Windows 操作系统和10.1 英寸电容触摸屏。

基于以上强大的功能与特性，SDS3000X 可以满足用户日益增长的测试测量和数据分析的需求，是一款性能先进的智能示波器。

特性与优点模拟通道带宽：500MHz、1GHz 4 模拟通道 +1 个外触发通道实时采样率高达 4GSa/s 创新的 SPO 技术 存储深度达 20Mpts/CH 波形捕获率达 1,000,000 帧 / 秒具备优异的模拟前端和信号保真度，最低底噪低于 400μV 支持 256 级波形辉度等级及色温显示配备 Windows 操作系统和 10.1 英寸电容触摸屏（1024*600），支持触摸屏、键盘、 鼠标操作采用顶级的用户界面MAUI，迷人的简洁，所有菜单层级只有两级 集成了 15 种最常用的一键式设计，一触即发智能触发（边沿，脉宽，判定合格，逻辑图，TV，窗口，间隔，漏失，欠幅， 斜率）串行总线触发及解码，支持的协议：I 2C、I 2S、 SPI、 UART/RS232、LIN、CAN、 CAN-FD、 FlexRay、MIL 1553、USB 2.0顺序模式（Sequence），根据用户设置的触发条件，以最小 1us 的死区时 间分段捕获符合条件的事件，并给出时间标签高级波形搜索和分析（WaveScan）功能，支持多种搜索条件，并把捕获的 异常信号用 Zoom 功能展现出来，方便用户在海量信息中快速搜索出需要关 注的波形增强分辨率模式（Eres），通过数字滤波的方式降低噪声带宽，可等效提高 示波器的垂直分辨率，最高可达 11 bit历史模式（History），一键进入，通过导航栏“回放”历史上出现过的波形综合报告归档功能（LabNoteBook）, 保存的数据可在示波器和 PC 端进行 再测量和分析24 种参数统计测量和 20 种波形运算，能支持 AIM 测量和波形的运算再运 算（Math on Math）趋势图（Trend），以线图的方式表示参数测量结果随采集的次序变化的过程， 第一次采集的测量结果显示在屏幕的最左边，测量结果从右往左逐渐移动参数直方图（Histicons），反映了参数值在一个确定范围 (Bin) 内出现的概率， 表明了参数值的统计分布状态通过 / 失败（Pass/Fail）检测功能，用户可自定义规则 / 模板，与被测信号 进行比较，实时统计通过 / 失败的次数，可用来查找异常波形或进行自动化测试内置 25MHz 函数 / 任意波形发生器，125MSa/s 采样率，16kpts 波形长度 16 路数字通道（MSO 功能），500MSa/s 采样率，10Mpts 存储深度4 位数字电压表和 5 位硬件频率计功能丰富的外围接口：4*USB Host，SD 卡槽，USB Device，LAN，AUX out (Pass/Fail,Trigger Out)，EXT TRIG，标准 D 型 15 针 SVGA 接口（分辨 率 1024*600），16 路逻辑通道接口和可配置的校准信号接口，方便仪器扩 展及程控操作SDS3000X 系列智能示波器数据手册型号与主要指标一键进入运算一键保存一键打印一键清除一键进入历史模式一键调用保存的波形一键复位一键捕获一键放大一键光标一键WaveScan 一键触发点归零同类型500MHzSDS3054XSDS3000X 系列智能示波器数据手册创新的SPO 构架丰富的调试工具包，精确定位问题在实时采样下，SDS3000X 系列最大支持250,000帧/秒的波形捕获率；在顺序模式（Sequence）下，其最高波形捕获率可达1,000,000帧/秒。

SDS3000X HD数据手册CN01ASDS3104X HDSDS3054X HDSDS3034X HD产品综述SDS3000X HD系列高分辨率数字示波器, 具有最高12-bit 垂直分辨率、优秀的本底噪声性能和垂直测量精度, 能满足更高精度的测量需求。

SDS3000X HD的最大带宽1 GHz, 采样率最高4 GSa/s, 具备4个模拟通道和16个数字通道, 存储深度可达400 Mpts/通道。

SDS3000X HD采用的SPO 技术, 波形捕获率高达890 000帧/秒, 具有256级辉度等级及色温显示；创新的数字触发系统, 触发灵敏度高, 触发抖动小；支持丰富的智能触发、串行总线触发和解码；支持历史 (History)模式、分段采集 (Sequence)、模板测试、搜索、导航、波特图和电源分析等高级分析模式；具备丰富的测量和数学运算功能。

SDS3000X HD采用了10.1 英寸电容式触摸屏, 支持多种手势实现对波形和菜单的常用操作, 结合前面板的多个一键操作按键, 极大地优化了操作示波器的效率, 提升了用户体验。

特性与优点模拟通道带宽：最高1 GHz；实时采样率高达4 GSa/s垂直分辨率：12-bit低本底噪声, 在全带宽下低至125 μVrms高直流增益精度：±0.5%SPO 技术•波形捕获率最高达890 000 帧/秒 (Sequence 模式), 200 000 帧/秒 (正常模式)•支持256 级波形辉度及色温显示•存储深度最高达400 Mpts/通道•数字触发智能触发: 边沿、斜率、脉宽、窗口、欠幅、间隔、超时、码型、第N边沿、建立/保持和视频触发 (支持HDTV)等串行总线触发和解码, 支持的协议包括标配的I2C、SPI、UART、CAN、LIN和选配的CAN FD、I2S、FlexRay、MIL-STD-1553B、SENT、Manchester、ARINC429等分段采集 (Sequence)模式, 最大可以将存储深度等分为80 000 段, 根据用户设置的触发条件, 以非常小的死区时间分段捕获符合条件的事件。

TDS3000操作说明1.打开示波器：a.首先，插入示波器电源线，并将另一端插入电源插口。

b.按下示波器面板上的电源按钮，打开示波器。

2.选择信号源：a.连接待测信号源到示波器的输入通道。

b.在示波器面板上选择对应的输入通道。

3.设置时基：a. 调节示波器面板上的时间/秒（Time/Div）旋钮，以设置水平时间基准。

b.根据需要调整水平时间偏移。

4.设置垂直尺度：a. 调节示波器面板上的垂直尺度/伏特（Vertical Scale/Volt）旋钮，以设置垂直电压基准。

b.根据需要调整垂直电压偏移。

5.触发设置：a.选择适当的触发模式（自动、正沿、负沿等）。

b.调整触发电平，以便示波器能够捕捉到所需的信号波形。

6.运行示波器：a.点击示波器面板上的运行按钮，开始数据采集和显示。

b.可以选择暂停按钮以停止数据采集，或触发按钮来手动触发数据采集。

7.配置测量参数：a.进入示波器的测量菜单，选择所需的测量类型（频率、周期、占空比等）。

b.根据需要选择输入通道、停留时间和其他参数。

8.存储和回放数据：a.TDS3000系列示波器可以存储和回放数据，以便进行后续分析。

b.使用USB存储设备或以太网连接存储示波器数据。

9.配置显示参数：b.调整波形显示窗口的大小和位置。

10.导出数据：a.可以将示波器数据导出为CSV、MATLAB或其他常见格式，以便进行进一步的数据处理和分析。

除了上述基本操作步骤外，TDS3000还具有许多高级功能，如波形数学运算、频谱分析、自动测量等。

用户可以通过阅读用户手册或进行在线培训获得更详细的操作说明。

总之，TDS3000是一款易于使用且功能强大的数字示波器，它适用于各种测量和分析应用。

熟悉和掌握上述操作步骤，将帮助用户充分发挥TDS3000的优势，并获得准确的测量结果。

泰克、安捷伦、力科三大厂家示波器比较
高端：
PC中包括的高速总线有USB，DDR，SATA(Serial Advanced Technology Attachment串行高级技术附件，一种基于行业标准的串行硬件驱动器接口），PCIE，HT(HyperTransport的简称。

HyperTransport本质是一种为主板上的集成电路互连而设计的端到端总线技术，目的是加速芯片间的数据传输速度。

)，QPI(Intel的QuickPath Interconnect技术缩写为QPI，译为快速通道互联。

事实上它的官方名字叫做CSI，Common System Interface公共系统界面，用来实现芯片之间的直接互联，而不是在通过FSB连接到北桥，矛头直指AMD的HT总线。

)，还有媒介方面的DisplayPort,HDMI ,最熟悉的US B 速度为480M bps,SATA 2 为3Gbps,PCIE 2为5Gbps。

以最少bit rate来计算，。

TDS3000操作说明1.基本操作：-打开示波器：按下示波器的电源按钮，等待示波器自检完成即可开始使用。

-设置测量参数：使用示波器的旋钮或按钮可以设置时间、幅度、触发等测量参数。

-连接信号源：使用BNC连接器将信号源连接到示波器的输入通道。

-调整触发：通过设置合适的触发模式和级别来确保示波器能够捕捉到您所需要的信号。

-调整显示：调整示波器的设置，如水平、垂直缩放、导航等，以获得清晰的波形显示。

2.测量功能：-时间测量：示波器可以测量信号的周期、频率、占空比等时间参数。

-幅度测量：示波器可以测量信号的峰值、峰峰值、有效值等幅度参数。

-延迟测量：示波器可以测量多个信号之间的延迟时间。

-峰峰值测量：示波器可以自动测量信号的峰峰值。

3.其他功能：-存储和回放波形：示波器可以将捕获的波形保存到内部或外部存储器中，并可以随时回放和查看。

-抓取波形截图：示波器可以通过连接至USB或网络，将波形截图保存到计算机或其他存储设备。

-自动测量：示波器可以自动识别并测量波形的各个参数，并以列表或图形的形式呈现出来。

-触发功能：示波器可以通过设置合适的触发方式，对特定条件下的信号进行捕捉和显示。

4.快捷指令：-示例指令：示波器的操作有时候需要手动输入指令，示波器提供了一些示例指令供用户参考，在操作过程中可以随时查阅。

-自定义指令：用户也可以根据自己的需求，编写自定义指令来进行操作。

总结：TDS3000系列数字示波器具有丰富的功能和详细的操作说明，能够满足不同用户的需求。

通过了解和掌握TDS3000的基本操作、测量功能、其他功能和快捷指令，用户可以更好地利用该示波器进行信号分析和实验研究。

同时，示波器还提供了详细的用户手册和技术支持，帮助用户更深入地理解和使用TDS3000系列。