怎样安装和汉化使用BBFlashBack
- 格式:pptx
- 大小:76.00 KB
- 文档页数:12
汉化补丁怎么用_补丁知识汉化补丁是一款应用软件,适用于pc平台。
改软件可以解除DVD碟片的多种限制。
以下是小编整理的关于汉化补丁的相关内容,欢迎阅读和参考!汉化补丁怎么用_补丁知识汉化补丁分为2种,一种是外挂式的汉化,一种是内核汉化,如果一个游戏有这2种汉化补丁,我们一般射击内核汉化补丁。
安装汉化补丁的方法:1.如果下载完成后解压缩的文件中只有一个exe文件,那这个汉化补丁就是安装型的汉化补丁,我们只需要双击它运行,再选择游戏的安装根目录,直接安装汉化补丁就行了。
PS:汉化补丁一般都安装在与游戏运行exe同级别的目录下。
PS:一般win7系统下安装汉化补丁,需要我们使用管理员方式运行。
2.如果下载的是多个文件的那种汉化补丁,那这个汉化补丁应该是覆盖型的汉化补丁,我们将解压缩出来的文件覆盖到游戏安装根目录下即可。
PS:覆盖的位置大部分情况是与游戏运行exe程序同级别的目录,少部分是特定的目录,我们一定要注意。
拓展阅读:汉化补丁其他使用方法由于国产软件的落后,现在很多优秀软件都为国外开发者开发,而这些原作者是不会将界面中文化的,所以就会造成中国用户使用困难。
汉化补丁的主要作用就是将非汉语软件或游戏程序中的外文转化或者变为中文,方便不懂外文的用户使用。
现大多汉化补丁为非盈利类,即免费软件。
并且大多安装便捷,只需一路“下一步”就可以了,有些稍麻烦的都会有安装说明。
汉化补丁下载了以后一般只用解压以后点EXE文件然后对应自己的游戏安装目录就行了。
有些会自己查找拓展阅读:补丁的相关知识各种软件的漏洞已经成为大规模网络与信息安全事件和重大信息泄露事件的主要原因之一。
针对计算机漏洞带来的危害,安装相应的补丁是最有效、也是最经济的防范措施。
对于互联网上数目众多的主机节点和日益复杂的各种应用,很难确保补丁被及时的安装,而且补丁实施基本是需求方到发布方去下载补丁程序并安装的过程,而不是发布方主动为需求方提供补丁程序并进行针对性的部署,因此补丁实施更依赖于非专业的需求方。
273 Branchport Ave. Long Branch, N.J. 07740 Thank you for using our products. (800) 631-2148 INSTALLATION INSTRUCTIONSSERIES RSSR STROBE APPLIANCESUse this product according to this instruction manual. Please keep this instruction manual for future reference.GENERAL:Wheelock’s Series RSSR Strobes can provide a non-synchronized strobe appliance when connected directly to a fire alarm control panel (FACP), or provide a synchronized strobe appliance when used in conjunction with a Sync Module (SM), Dual Sync Module (DSM) or Wheelock’s PS-12/24-8 Power Supply with patented sync protocol. The RSSR Strobe appliances are UL Listed under Standard 1638 for Emergency Devices. The RSSR-2415C, RSSR-2475C and RSSR-24110C strobes are intended for ceiling mount only and the RSSR-2415W, RSSR-2475W and RSSR-24110W strobes are intended for wall mount only, with the backboxes specified in these instructions (See Mounting Options). The RSSR models have an integrated strobe mounting plate (SMP) that can be mounted to a single-gang, double-gang, 4” backbox, 100mm European backbox or SHBB surface backbox. The strobe uses a xenon flashtube with solid state circuitry enclosed in a polycarbonate lens to provide maximum visibility and reliability for effective visible signaling. All inputs are polarized for compatibility withINSTRUCTIONS, CAUTIONS AND WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.SPECIFICATIONS:Table 1: UL Models and RatingsModel Regulated Voltage (VDC/VRMS) Voltage Range (VDC/VRMS)Strobe Candela (cd) Mounting OptionsRSSR-2415C 24 16.0-33.0 15 A,B,C,D RSSR-2415W 24 16.0-33.0 15 A,B,C,D RSSR-2475C 24 16.0-33.0 75 A,B,C,D RSSR-2475W 24 16.0-33.0 75 A,B,C,D RSSR-24110C 24 16.0-33.0 110 A,B,C,D RSSR-24110W 24 16.0-33.0 110 A,B,C,DNOTES:1. Strobes will produce 1 flash per second over the “Regulated Voltage” range.2. All models are for indoor use with a temperature range of +32°F to +120°F (0°C to +49°C) and maximum humidity of 85% RH. The effect of shippingand storage temperatures shall not adversely affect the performance of the appliance when it is stored in the original cartons and is not subjected to misuse or abuse.A7A4Table 2: Candela at Various Angles Per UL 1638Model Rated CandelaA1 A2 A3 A4 A5 A6/A7RSSR-2415C 15.0cd 15 1.3 1.3 1.2 1.2 0.7RSSR-2415W 15.0cd 15 1.3 1.3 1.2 1.2 0.7 RSSR-2475C 75.0cd 75 6.7 6.7 6.2 6.2 3.3RSSR-2475W 75.0cd75 6.7 6.7 6.2 6.2 3.3 RSSR-24110C 110.0cd110 9.8 9.8 9.1 9.1 4.8 RSSR-24110W 110.0cd 110 9.8 9.8 9.1 9.1 4.8When calculating the total currents use Table 3 to determine the highest value of RMS current for an individual strobe, then multiply these values by the total number of strobes. Be sure to add the currents for any other appliances, including audible signaling appliances powered by the same source, and to include any required safety factors.NOTE: The maximum number of strobes on a single notification appliance circuit shall not exceed 50.Table 3: UL Current Ratings (AMPS)Maximum RMS Current DrawUL Voltage 2415C/W 2475C/W 24110C/WDC 16-33VDC 0.090 0.315 0.420 FWR 16-33VRMS 0.145 0.480 0.645 These notification appliances are UL Listed as “Regulated”. They are intended to be used with FACPs whose notification circuits are UL Listed as“Regulated.” These appliances shall not be used on UL Listed “Special Application” notification circuits unless the appliances are identified to be compatible in the installation instructions of the FACP or unless the FACP is identified to be compatible in this instruction manual.WIRE IMPEDANCE BETWEEN STROBES SHALL NOT EXCEED 35 OHMS.Strobes are not designed to be used on coded systems in which the applied voltage is cycled on and off.WHEELOCK POWER SUPPLIES DOES NOT EXCEED THE POWER SOURCES’ RATED CAPACITY OR THE CURRENT RATINGS OF ANY FUSES ON THE CIRCUITS TO WHICH THESE APPLIANCES ARE WIRED. OVERLOADING POWER SOURCES OR EXCEEDING FUSE RATINGS COULD RESULT IN LOSS OF POWER AND FAILURE TO ALERT OCCUPANTS DURING AN EMERGENCY, WHICH COULD RESULT IN PROPERTY DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.The following figures (A-F) show the maximum number of field wires (conductors) that can enter the backbox used with each mounting option. IfCheck that the installed product will have sufficient clearance and wiring room prior to installing backboxes and conduit, especially if sheathed multiconductor cable or 3/4" conduit fittings are used.Although the limits shown for each mounting option comply with the National Electrical Code (NEC), Wheelock recommends use of the largest backbox option shown and the use of approved stranded field wires, whenever possible, to provide additional wiring room for easy installation and minimum stress on the product from wiring.Figure 1: Wiring DiagramsFigure 2:•All strobe appliances have in-out wiring terminals that accepts two #12 to #18 American Wire Gauge (AWG) wires at each screw terminal. Strip leads 3/8 inches and connect to screw terminals.•Break all in-out wire runs on supervised circuits to assureintegrity of circuit supervision as shown in Figure 2. Strobe/Plateassembly has two red leads and two black leads for in-out wiring.The polarity shown in the wiring diagrams is for the operation ofthe appliances. The polarity is reversed by the FACP duringsupervision.Refer to the instruction sheets for SM (P83123), DSM (P83177) or Wheelockpower supplies for additional information.1.This RSSR model can be flush mounted to a standard single-gang backbox (Figure A), 4” or 100mm backbox (Figure B) or double-gang backbox (Figure C). It canalso be surface mounted to a 4” or 100mm backbox (Figure B), double-gang backbox (Figure C) or the SHBB (Figure D). Mounting hardware for each mounting option is supplied.2.Conduit entrances to the backbox should be selected to provide sufficient wiring clearance for the installed product. Do not pass additional wires (used for otherthan the signaling appliance) through the backbox. Such additional wires could result in insufficient wiring space for the signaling appliance.3.When terminating field wires, do not use more lead length than required. Excess lead length could result in insufficient wiring space for the appliance.e care and proper techniques to position the field wires in the backbox so that they use minimum space and produce minimum stress on the product. This isespecially important for stiff, heavy gauge wires and wires with thick insulation or sheathing.5.This RSSR model has an integrated Strobe Mounting Plate (SMP) which must be oriented correctly when it is mounted to the backbox. Turn the SMP so that thearrow above the words “Horizontal Strobe” points to the top side.6.Mount the SMP first to the backbox. Next slide the beauty plate over the SMP until the 2 snaps of the beauty plate engage with the SMP.7.The beauty plate can be removed from the strobe assembly once engaged. First, gently insert a screwdriver into one of the slots located on the top and bottom edgesof the beauty plate. Second, gently pull away from the wall with the inserted screwdriver to disengage the snap. Third, repeat the first and second steps for the second slot. Finally, gently lift the beauty plate away from the SMP.CAN BE SEEN BY ALL INTENDED VIEWERS, WITH THE INTENSITY, NUMBER, AND TYPE OF STROBES BEING SUFFICIENT TO MAKE SURE THAT THE INTENDED VIEWER IS ALERTED BY PROPER ILLUMINATION, REGARDLESS OF THE VIEWER'S ORIENTATION. FAILURE TO CERTAIN CIRCUMSTANCES, MIGHT INDUCE A PHOTO-SENSITIVE RESPONSE IN PERSONS WITH EPILEPSY. STROBE REFLECTIONS IN A GLASS OR MIRRORED SURFACE MIGHT ALSO INDUCE SUCH A RESPONSE. TO MINIMIZE THIS POSSIBLE HAZARD, WHEELOCK STRONGLY RECOMMENDS THAT THE STROBES INSTALLED SHOULD NOT PRESENT A COMPOSITE FLASH RATE IN THE FIELD OF VIEW WHICH EXCEEDS FIVE (5) Hz AT THE OPERATING VOLTAGE OF THE STROBES. WHEELOCK ALSO STRONGLY RECOMMENDS THAT THE INTENSITY AND COMPOSITE FLASH RATE OF INSTALLED STROBES COMPLY WITH LEVELS ESTABLISHED BY APPLICABLE LAWS,Check the installation instructions of the manufacturers of other equipment used in the system for any guidelines or restrictions on wiring and/or special precautions to assure electrical noise immunity (e.g. audio crosstalk).NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna, 2) Increase the separation between the equipment and receiver, 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and 4) Consult the dealer or an experienced radio/TV technician for help.ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM WHEELOCK MANUALS OR OTHER DOCUMENTS DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, OR FOR ANY OTHER USE, INCLUDING DESCRIPTION OF THE PRODUCT'S APPLICATION, OPERATION, INSTALLATION AND TESTING IS USED AT THE SOLE RISK OF THE USER AND WHEELOCK WILL NOT HAVE ANY LIABILITY FOR SUCH USE.IMPORTANT: READ SEPARATE "GENERAL INFORMATION" SHEET FOR INFORMATION ON THE PLACEMENT, LIMITATIONS, INSTALLATION, FINAL CHECKOUT, AND PERIODIC TESTING OF NOTIFICATION APPLIANCES.Limited WarrantyWheelock products must be used within their published specifications and must be PROPERLY specified, applied, installed, operated, maintained and operationally tested in accordance with these instructions at the time of installation and at least twice a year or more often and in accordance with local, state and federal codes, regulations and laws. Specification, application, installation, operation, maintenance and testing must be performed by qualified personnel for proper operation in accordance with all of the latest National Fire Protection Association (NFPA), Underwriters' Laboratories (UL), Underwriters' Laboratories of Canada (ULC), National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the requirements of the local authority having jurisdiction (AHJ). Wheelock products when properly specified, applied, installed, operated, maintained and operationally tested as provided above are warranted against mechanical and electrical defects for a period of three years from date of manufacture (as determined by date code). Correction of defects by repair or replacement shall be at Wheelock's sole discretion and shall constitute fulfillment of all obligations under this warranty. THE FOREGOING LIMITED WARRANTY SHALL IMMEDIATELY TERMINATE IN THE EVENT ANY PART NOT FURNISHED BY WHEELOCK IS INSTALLED IN THE PRODUCT. THE FOREGOING LIMITED WARRANTY SPECIFICALLY EXCLUDES ANY SOFTWARE REQUIRED FOR THE OPERATION OF OR INCLUDED IN A PRODUCT. WHEELOCK MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS, IMPLIED OR STATUTORY WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER.USERS ARE SOLELY RESPONSIBLE FOR DETERMINING WHETHER A PRODUCT IS SUITABLE FOR THE USER'S PURPOSES, OR WHETHER IT WILL ACHIEVE THE USER'S INTENDED RESULTS. THERE IS NO WARRANTY AGAINST DAMAGE RESULTING FROM MISAPPLICATION, IMPROPER SPECIFICATION, ABUSE, ACCIDENT OR OTHER OPERATING CONDITIONS BEYOND WHEELOCK'S CONTROL.SOME WHEELOCK PRODUCTS CONTAIN SOFTWARE. WITH RESPECT TO THOSE PRODUCTS, WHEELOCK DOES NOT WARRANTY THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE OR THAT THE SOFTWARE WILL MEET ANY OTHER STANDARD OF PERFORMANCE, OR THAT THE FUNCTIONS OR PERFORMANCE OF THE SOFTWARE WILL MEET THE USER'S REQUIREMENTS. WHEELOCK SHALL NOT BE LIABLE FOR ANY DELAYS, BREAKDOWNS, INTERRUPTIONS, LOSS, DESTRUCTION, ALTERATION, OR OTHER PROBLEMS IN THE USE OF A PRODUCT ARISING OUT OF OR CAUSED BY THE SOFTWARE.THE LIABILITY OF WHEELOCK ARISING OUT OF THE SUPPLYING OF A PRODUCT, OR ITS USE, WHETHER ON WARRANTIES, NEGLIGENCE, OR OTHERWISE, SHALL NOT IN ANY CASE EXCEED THE COST OF CORRECTING DEFECTS AS STATED IN THE LIMITED WARRANTY AND UPON EXPIRATION OF THE WARRANTY PERIOD ALL SUCH LIABILITY SHALL TERMINATE. WHEELOCK IS NOT LIABLE FOR LABOR COSTS INCURRED IN REMOVAL, REINSTALLATION OR REPAIR OF THE PRODUCT BY ANYONE OTHER THAN WHEELOCK OR FOR DAMAGE OF ANY TYPE WHATSOEVER, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFIT OR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THE FOREGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE EXCLUSIVE LIABILITY OF WHEELOCK.IN NO CASE WILL WHEELOCK'S LIABILITY EXCEED THE PURCHASE PRICE PAID FOR A PRODUCT.Limitation of LiabilityWHEELOCK'S LIABILITY ON ANY CLAIM OF ANY KIND, INCLUDING NEGLIGENCE AND BREACH OF WARRANTY, FOR ANY LOSS OR DAMAGE RESULTING FROM, ARISING OUT OF, OR CONNECTED WITH THIS CONTRACT, OR FROM THE MANUFACTURE, SALE, DELIVERY, RESALE, REPAIR OR USE OF ANY PRODUCT COVERED BY THIS ORDER SHALL BE LIMITED TO THE PRICE APPLICABLE TO THE PRODUCT OR PART THEREOF WHICH GIVES RISE TO THE CLAIM. WHEELOCK'S LIABILITY ON ANY CLAIM OF ANY KIND SHALL CEASE IMMEDIATELY UPON THE INSTALLATION IN THE PRODUCT OF ANY PART NOT FURNISHED BY WHEELOCK. IN NO EVENT SHALL WHEELOCK BE LIABLE FOR ANY CLAIM OF ANY KIND UNLESS IT IS PROVEN THAT OUR PRODUCT WAS A DIRECT CAUSE OF SUCH CLAIM. FURTHER, IN NO EVENT, INCLUDING IN THE CASE OF A CLAIM OF NEGLIGENCE, SHALL WHEELOCK BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE PRECEDING LIMITATION MAY NOT APPLY TO ALL PURCHASERS.9/05。
录屏软件BB flashback的使用方法
1、安装BB FlashBack Pro 3,安装完成后使用注册机即可实现全功(不使用注册机的话导出的视频会有水印,影响观看)
2、点击“FlashBack Recorder.exe”,打开录制软件
3、选择取消更新,跳转到启动菜单(如图)选择
4、如图,按照默认选择即可,如果需要声音,在“RecordSound”前打勾,点击红色圆点开始录制
5、完成动作后,点击红色方框,选择SA VE,保存文件
5、打开之前保存好的文件,文件名为fbr
6、打开文件后,先按暂停,然后按“export”进行文件转换
7、考虑到通用性,选择WMV,配置不用修改,选择OK。
8、点击Export,系统将生成WMV视频文件,用XP自带的播放器即可播放。
软件安装步骤
1.双击
2.双击exe文件
3.点击“浏览”按钮,选择保存路径,然后点击“安装”。
4.到上步选择的保存路径处,找到并双击打开
5.双击打开其中的“初始化”文件夹
6.双击“初始化”文件(一般情况下电脑中均已安装了flash paper文件,如果没有安装就先双击get flash player文件进行安装)
至此应该安装成功。
软件使用步骤
注:简报可以在word或者ppt中制作(我们以word为例进行说明)
1.打开word版简报
2. 点击“文件”
3.选择打印并点击
4.从打印机名称中选择”macromedia flashpaper”打印机,然后点击“确定”进行打印
5.会出现如下界面
6.点击出现如下界面
然后输入文件名,选择好保存路径,点击“保存”成功软件为flash文件。
文件后缀为.swf。
HaFaLa Chinese Software Animated Character Learning产品安装操作说明(简体中文版)适用于CD类型8合1学习光盘系列本说明内容可能已更新恕不另行通知最新内容请访问产品支持页上海韬图动漫科技有限公司2009-3目录HaFaLa Chinese Software (1)感谢使用HaFaLa Chinese Software (3)安装软件所需的基本配置 (3)硬件标准配置 (3)软件环境配置 (3)安装步骤 (4)1 验证安装程序 (4)2 用户许可协议 (5)3 选择需要安装的程序内容 (6)4 选择安装路径 (7)5 软件开始安装到计算机 (9)6 确认安装Adobe Flash Player 控件 (10)软件安装成功 (10)软件激活 (11)1 运行软件 (11)2 获取注册信息 (12)3 在线激活方法演示 (13)4 输入激活码 (14)5 激活成功 (14)问题与对策 (15)无法识别光盘 (15)运行程序却无法安装 (15)点击运行安装程序,鼠标忙碌却无法继续 (15)Windows Vista 系统下,运行软件报错 (15)我不知道该如何激活? (16)背景音乐杂音和更换背景音乐 (16)感谢使用HaFaLa Chinese Software感谢使用韬图汉字教育产品。
本册是关于HaFaLa Chinese Animated CharacterLearning Software 的安装说明。
在安装之前,请确认产品包装是否完整,软件存储介质是否完好。
确认之后,请首先按照下列基本配置进行软件运行所需的必要环境部署。
注意:购买、安装和使用HaFaLa Chinese 产品必须遵守《用户最终许可协议》。
详细说明请见 相关页“HaFaLa Chinese””HaFaLa” “TaoTu”文字标识及其图片标识版本为上海韬图动漫科技有限公司(Shanghai TaoTu Animation & Technology Co,. Lrd )所有,受中华人民共和国相关法律管辖。
Q:倒出文件后影音不同步怎么办?A:这种文件在所有的屏幕录像中都很常见,正确的做法是先确定声音是快还是慢,如果是快则快多少,如果是慢则慢多少,然后手工修正。
先把声音文件倒出然后删除原声音。
如果需要把声音提前1秒则在首帧上右键添加关键帧添加24帧即可。
如果需要把声音延后1秒则在第25帧上右键添加刚才倒出的声音。
Q:pc speaker里没有混音选项怎么办?A:美国唱片工业联合会为了防止内录音乐而盗版,所以禁止了声卡的内录,只要安装Virtual Audio Cable虚拟个声卡就行了。
另外不要使用盗版系统并确认已经安装了声卡的官方驱动。
Q:为什么在倒出flash格式后在网页中播放如果右键放大的话会不清楚?A:只需要右键选择“品质----低”即可。
Q:为什么我倒出flv格式后用某些播放软件打开时会出现错误?A:我发现kmlayer会出现这种错误,已经和软件作者沟通证实,其他软件可能没有这种错误。
Q:导出flv然后上传到视频网站为什么就模糊了?A:这是减少文件体积的常见现象,如果不想那么模糊,建议上传到youtube,不会特别模糊。
使用经验:第三张图显示即使你的配置非常好,你也应该尽量使用最后一种模式录像。
如果录出来是黑屏再选择其他模式。
如果你录的是一些视频最后却发现是黑屏,那么可以在软件里设置关掉视频加速功能。
菜单----Effects----Highlight Cursor,如果想取消鼠标点击时的红色圆圈显示,可以取消 Highlight mouse clicks的勾,如果想取消鼠标加亮,可以取消Highlight mouse cursor的勾。
有些人倒出swf 或flv时鼠标或注释框可能会有阴影,只要使用正版的操作系统一般就不会出现,原因不明。
如果想在swf中加入超连接或邮件地址(非 swf格式不支持),可在菜单----Insert----Button,在Action中的“Go to website URL:”选项中填入网址或邮件地址。
★★★特别推荐★★★Blackberry在线帮助系统:/faq/bbROM和同步软件可以到我们的软件下载网站下载/BlackBerry 同步软件(Win) MAC平台同步软件【咱拿8700说点事】全傻瓜式游戏修改图片教程/thread-105639-1-1.html打造BB最强工具帖(视频,音频,文本,游戏)喜欢就自己做【8100视频全屏手记】/viewthread.php?tid=103713去除黑莓blackberry 8700 8100 8800 所有型号开机密码remove blackberry code /viewthread.php?tid=95740顺利用gmail的托管功能接收163邮箱的邮件,已经贴出详细步骤。
/viewthread.php?tid=74382[[11.19] ]更新带图标的lt2mail 版本2.11,可以从手机发附件。
(增加cod文件)/thread-96949-1-2.html可wap或net,快捷键和功能丰富的Gorilla星际浏览器启航版for 7100/7200/8700 /viewthread.php?tid=92689免WIPE重新延长BerryPix2试用期+应用程序RMS databases的数据备份/thread-34373-1-1.html8100可以从卡上装东西以及用蓝牙接收任何格式的文件/viewthread.php?tid=7717372xx,71xx,8xxx全系列皆可!免费(发射塔)定位软件(0.1版本放出修正64个文件的错误) /thread-79299-1-1.html7130 8700 MP3播放器——BerryTunes/viewthread.php?tid=35132那个看网络电视的软件!!找到了(内附详细设置说明)用于8700 and 7130/viewthread.php?tid=60820网络电视软件下载以及安装BBvideoPlay/viewthread.php?tid=6091807-04-15必须进网吧装黑莓软件的朋友现在有解决方案了/thread-45354-1-1.html来一首《佛求》充满疑问的新手特别一定要来看/thread-45704-1-1.htmlBBer's SMS Manager,支持导出短信时附带发信收信人姓名/viewthread.php?tid=29516简单读取备份ipd 文件里面的短信IPD_SMS/viewthread.php?tid=14271BBer's AddressBook 批量添加联系人中文首字母/viewthread.php?tid=29517推荐使用【电话簿前加首字母】/viewthread.php?tid=87227~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 4.2ROM型号的7130 8700 8100 8800 8300等推荐下列看书软件~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~【看书新思路】我要看txt的但是不想转换这个想法可以啦o(∩_∩)o...哈哈/thread-89345-1-1.htmlAnyView测评新鲜出炉/viewthread.php?tid=95327布农铃的方法----新手做书终极教程/viewthread.php?tid=86864★★★自带浏览器激活上网★★★现在只有7230 7730 7290 7100等型号需要激活才可以实现自带浏览器上网7290 7100 7105等型号,可以通过使用UCWEB 航海家oprea等浏览器来上网则无需激活。