亚伯兰YS01 便携式扫描仪说明书

SCANNER手持便携式扫描仪使用手册产品参数：名称：SCANNER品牌便携式手持扫描仪影像传感器：A4彩色光电传感器白平衡：自动扫描分辨率：300dpi, 600dpi.900dpi存储格式：JPEG/PDF扫描幅度：A4（216mm）存储方式：MicroSD/TF卡扩展内存：MicroSD/TF(1G-32GB)传输方式：USB2.0产品尺寸：254mm*30mm*28mm电源：电池（5号电池X2）重量：约50g本体颜色: 标准颜色银黑色工作方式：脱机扫描自动关机：无操作3分钟后自动断电扫描软件: 可支持Windows Imaging，PHOTO Shop 和其他类似图像处理OCR软件。

系统环境: Windows 2000/ME/XP,MAC X, 128 MB RAM ，1000 MB HDD,设备特点: 双滚轮稳定控制系统整页扫描产品特点：1、一键式的扫描模式切换和高低分辨率设置，简单易操作。

2、可实时看到扫描纸张数，不需要安装任何专业的驱动软件。

3、MicroSD卡直接存储读取扫描数据，读卡器或者连接USB线就可以实现，无需扫描笔。

4、扫描数据为JPEG/PDF格式，编辑便利。

5、电源为普通5号电池，外出办公携带方便，更换简单。

1. 主要特点扫描选择彩色/黑白，分辨率600/300dpi可选，直接储存JPG文件到Micro SD卡，最大支持32GB,系统环境Windows 7/ Vista/ XP/ 和Mac OS 10.4或者以上（直接插入，不需安装驱动程序）。

2. 各部位功能1. 电池口：两个AA碱性电池；2. 电源/扫描电源开/关：持续按键两秒直到电源开/关,在电源开启的情况下，继续按键一次开始扫描，再次按键停止扫描；3. 错误指示灯：扫描速度过快，红灯亮；4. 扫描指示灯：绿灯亮，开始扫描；5. LED屏幕：扫描状态显示；6. 分辨率：选择高(600dpi)/低(300dpi)分辨率,屏幕有图标显示；选择彩色/黑白状态扫描时，屏幕有图标显示。

蓝牙扫描仪怎么使用
蓝牙扫描仪怎么使用
虽然说我们生活中常见的扫描设备都是以电脑主机为终端进行连接的，但是却同时也有部分的行业因为无法时刻待在电脑旁，但是又有条码采集需求，所以这个时候就需要一把蓝牙无线条码扫描枪，并且这款扫描枪还要能够和移动设备进行连接。

下面是蓝牙扫描仪怎么使用，欢迎参考阅读！
按击扫描枪上的激活键，亮起红色的指示灯则为代表已成功启动扫描功能。

（注：如果是初次使用或者长时间没使用的状态下，可能会出现无法启动的问题，这时只要将扫描枪连接数据线充一会电就可以了）
打开安卓手机中的'蓝牙界面，并开启蓝牙功能，搜寻与蓝牙无线条码扫描枪相对应的信号
点击相对应的信号，进行连接，点击之后会跳出需输入密码的提示框，一般默认的密码都是10010，填写完之后，点击“确定”即可。

点完“确定”之后，蓝牙就会自动与扫描枪进行连接
等待连接成功之后，我们只要打开在安卓系统界面中的数据接收终端，就可进行扫描，例如记事本等文档。

注意事项
在很久没使用或者除此使用时，一般都要充会电才可以激活扫描功能的。

扫描仪操作步骤说明书操作扫描仪时，请按照以下步骤进行操作。

本说明书将详细介绍如何正确地使用扫描仪，并确保您能够顺利进行扫描操作。

请仔细阅读以下内容。

1. 检查设备连接在开始使用扫描仪之前，请确保设备已正确连接到您的电脑或其他设备上。

检查电源线和数据线是否牢固连接，并确保所连接的设备已打开和正常工作。

2. 打开扫描软件在您的电脑上打开扫描软件。

通常情况下，您可以在操作系统的"开始菜单"或"应用程序"文件夹中找到扫描软件的图标。

双击该图标，等待软件加载完毕。

3. 准备扫描文件将需要扫描的文件放置在扫描仪的进纸托盘上。

请确保文件摆放整齐，并且没有折叠、撕裂或损坏的部分。

关闭进纸托盘，确保文件可以顺利进入扫描仪。

4. 设置扫描参数在扫描软件的界面上，点击"设置"或"选项"按钮，进入扫描参数设置页面。

根据您的需求，选择扫描的颜色模式（黑白、灰度或彩色）、分辨率、文件格式等参数。

请注意，不同的设置选项可能对扫描速度和文件大小产生影响。

5. 开始扫描确认扫描参数设置完成后，点击"扫描"或"开始扫描"按钮，开始进行扫描操作。

扫描仪将会自动将文件从进纸托盘上依次送入进行扫描，并将扫描结果保存至您指定的位置。

6. 预览和编辑扫描文件（可选）某些扫描软件支持预览和编辑扫描文件的功能。

在扫描完成后，您可以在软件界面上查看扫描结果，并进行一些基本的编辑操作，如裁剪、旋转、亮度调节等。

根据需要，您可以选择是否进行这些操作。

7. 保存扫描文件在完成扫描和编辑之后，点击"保存"或"存储"按钮，将扫描文件保存至您的电脑或其他设备上。

请选择合适的文件名和保存位置，并选择您想要的文件格式（如PDF、JPEG等）。

8. 完成操作在保存扫描文件后，您可以选择继续扫描其他文件，或者关闭扫描软件。

扫描仪使用方法1.准备工作在开始使用扫描仪之前，需要进行以下准备工作：-确保扫描仪已正确连接到电源插座，并且连接到电脑或网络。

2.调整设置在使用扫描仪之前，您可能需要根据需要调整以下设置：- 分辨率：分辨率决定了扫描文件的质量和大小。

较高的分辨率可以获得更清晰的图像，但会占用更多的存储空间。

常见的分辨率选择包括300dpi、600dpi和1200dpi等。

-扫描模式：扫描仪通常提供两种扫描模式，即黑白扫描和彩色扫描。

根据您要扫描的文件类型选择适当的模式。

-文件格式：扫描仪可以将扫描的文件保存为不同类型的文件格式，如PDF、JPEG、PNG等。

选择适合您需求的文件格式。

3.扫描文件接下来，我们将详细介绍如何扫描文件：-打开扫描软件或从计算机上的扫描程序中选择启动扫描仪。

-将要扫描的文件放在扫描仪的扫描床上。

确保文件紧贴扫描床的边缘，以避免扫描到多余的空白区域。

-在扫描软件中选择扫描设置，如分辨率、扫描模式和文件格式等。

-点击“扫描”按钮开始扫描过程。

扫描仪会自动移动扫描头扫描文件。

-扫描完成后，文件将保存到您指定的位置。

您可以选择更改保存位置和文件名。

4.扫描多页文件如果您需要扫描多页文件，可以使用以下方法：-确保文件按正确顺序放置在扫描床上。

-在扫描设置中选择“多页扫描”选项。

-点击“扫描”按钮开始扫描。

扫描仪将依次扫描每一页文件，并将它们保存为单个文件。

-扫描完成后，您可以选择将文件保存为单个PDF文件或多个图像文件。

5.扫描照片-在扫描软件中选择照片扫描模式。

-将照片放在扫描床上，确保照片与边缘对齐。

-调整扫描设置，如分辨率和文件格式，以适应您需要的照片质量和大小。

-点击“扫描”按钮开始扫描。

扫描仪将开始扫描照片。

6.扫描双面文件一些扫描仪具有双面扫描功能，可同时扫描文件的正反两面。

以下是扫描双面文件的方法：-确保双面文件摆放在扫描床上，正反两面按正确顺序排列。

-在扫描设置中选择“双面扫描”选项。

扫描仪使用手册
满足sane协议的扫描仪，可以使用系统自带软件“扫描易”进行扫描。

1、进入系统桌面后，点击左下角“启动器”图标，搜索“扫描易”（支持中英文搜索）
2、点击“扫描易”打开操作界面。

3、单页扫描：把需要扫描的文件放在扫描床上，然后点击“下拉小三角”图标，点击“单页”后开始扫描。

如果对扫描件不满意，可以选择“重新扫描”或“删除”图标。

如果需要对扫描件进行裁剪，可以点击“剪刀”图标。

最后对扫描件进行保存。

点击“下载”图标，选择保存位置，点击“保存”
4、多页扫描：把需要扫描的文件放在托盘上，然后点击“下拉小三角”图标，点击“传送来的所有页面”后开始扫描。

点击“下载”图标进行保存。

5、单页扫描多次：把需要扫描的文件放在扫描床上，然后点击“下拉小三角”图标，点击“来自扫描床的多个页面”后开始扫描。

点击“下载”图标进行保存。

6、更多功能请点击“省略号”查看使用。

5、电子邮件：扫描件可以通过电子邮箱直接发送给收件人。

6、重新排序页面：用户可以根据自己需求对页面进行重新排序。

7、首选项：可以选择扫描仪、扫描面、页面大小、扫描清晰度等。

8、键盘快捷键：提高工作效率。

9、帮助手册：提供更多功能配置方法。

10、关于：查看扫描易版本、作者以及许可信息。

Datalogic Scanning, Inc. 959 Terry StreetEugene, Oregon 97402 USATelephone: (541) 683-5700 Fax: (541) 345-7140An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written per-mission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices,including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website () or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.DISCLAIMERDatalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc.All other trademarks and trade names referred to herein are property of their respective owners.SERVICES AND SUPPORTDatalogic provides several services as well as technical support through its website. Log on to and click on the links indicated for further information including: · PRODUCTSSearch through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including: - Datalogic Aladdin™, a multi-platform utility program that allows device configurationusing a PC. It provides RS-232 interface configuration as well as configuration barcode printing. · SERVICE & SUPPORT- Technical Suppor t - Product documentation and programming guides and TechnicalSupport Department in the world- Service Programs - Warranty Extensions and Maintenance Agreements- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc. · CONTACT US Information Request Form and Sales & Service NetworkDECLARATION OF CONFORMITY11Datalogic Scanning Group SrlEC-037Rev.: 3Pag.: 1 di 1Via S. Vitalino, 13Lippo di Calderara di Reno (BO)40012 Italydichiara che declares that the déclare que lebescheinigt, daß das Gerät declare que elTOUCH 65 XXX and TOUCH 90 XXX; Barcode Readere tutti i suoi modelli and all its models et tous ses modèles und seine Modelley todos sus modelossono conformi alle Direttive del Consiglio Europeo sottoelencate:are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: den nachstehenden angeführten Direktiven des Europäischen Rats:cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:2004/108/EC EMC DirectiveBasate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und Produktsicherheit entsprechen.Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las Medidas de seguridad relativas al producto.Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti: This declaration is based upon compliance of the products to the following standards: Cette déclaration repose sur la conformité des produits aux normes suivantes:Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht: Esta declaración se basa en el cumplimiento de los productos con la siguientes normas:EN 55022 (C LASS B ITE ), S EPTEMBER 2006: A MENDMENT A 1: O CTOBER 2007:L IMITS AND METHODS OF MEASUREMENTS OFRADIO DISTURBANCE CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENTEN 55024, S EPTEMBER 1998: A MENDMENT A1:2001+A2:2003: I NFORMATION T ECHNOLOGY E QUIPMENT I MMUNITY CHARACTERISTICSL IMITS AND METHODS OF MEASUREMENTSLippo di Calderara, November 14th, 2011 Ruggero CacioppoQuality Assurance ManagerTouch ™ 65/90 ProCONTACT READERSQUICK REFERENCE GUIDE©2007-2012 Datalogic Scanning, Inc. 820048214 (Rev. H) January-2012LED CLASSThis product conforms to EN60825-1:2001. FCC COMPLIANCEModifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. Touch™ Pro readers scan barcodes on contact . All models have a hardware trigger button, which by default must be pressed to read a code. After configuring the reader interface type, the software trigger paramet’er (available in this manual) can be selected so that the reader operates like a model without trigger. Code scanning is performed along an imaginary line passing across the reading window. This imaginary line must pass through the entire code.Successful scanning is obtained by keeping the handle of the reader parallel with respect to the code surface, see the figure above. WEEE COMPLIANCEWaste Electrical and Electronic Equipment(WEEE) Statementscanning linetrigger buttonDEFAULT VALUESUSB-KBD DEFAULT SETTINGSUSA keyboard, FIFO enabled, inter-character and inter-code delays disabled, control character emulation = ctrl+shift+key.DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = ENTER, character replacement disabled.RS-232 Standard DEFAULT SETTINGS9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx timeout 5 sec., ack/nack disabled, FIFO enabled, serial trigger lock disabled. DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = CR-LF, character replacement disabled. WEDGE DEFAULT SETTINGSUSA keyboard, caps lock off, caps lock auto-recognition enabled, num lock unchanged, inter-character and inter-code delays disabled, control character emulation = ctrl+shift+key.DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = ENTER, character replacement disable.PEN DEFAULT SETTINGSinterpret mode, conversion to code 39 disabled, output level normal, idle level normal, minimum output pulse 600 μs, overflow medium, inter-block delay disabled. CODE SELECTIONEnabled codes∙EAN 8/EAN 13 / UPC A/UPC E without ADD ONcheck digit transmitted, no conversions∙Interleaved 2/5check digit control and transmission, variable length code; 4-99 characters∙Standard Code 39no check digit control, variable length code; 1-99 characters∙Code 128variable length code; 1-99 charactersDisabled codesEAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49, RSS CodesTECHNICAL FEATURESElectrical FeaturesPower SupplyRS-232interface 5 Vdc ± 5%Consumption:MaximumOperatingSleep mode &USB Suspend Mode150 mA @ 5 Vdc 100 mA @ 5 Vdc < 500 μA @ 5 VdcMax. Scan Rate 256 scans/secReading Indicators LED, BeeperOptical FeaturesTouch™ 65 Pro Touch™ 90 Pro Sensor CCD solid state (2048 p xels) Reading Field 63 mm typical 80 mm typicalMax. Resolution 0.10 mm(4 mils) 0.13 mm (5 mils)P S min. 15% (Datalogic Test Chart)Environmental FeaturesWorking Temperature 0︒ to +55 ︒C / 32° to 131 °FStorage Temperature -20︒ to +70 ︒C / -4° to 158 °FHumidity 90%noncondensing Drop Resistance 1.2 m (3 ft 11 in)ESD Protection 16 KVProtection Class IP30Mechanical FeaturesWeight (without cable) about 160 g (5.6 oz) about 195 g (6.8 oz)Cable Length 2 m (6 ft 6 in) TRIGGER SELECTIONAfter configuring the reader interface type, the software trigger parameter can be selected so that the reader operates like a model without trigger.Software TriggerÌ$+BK0$-tÎ♦ Hardware TriggerÌ$+BK1$-yÎDATALOGIC SCANNING LIMITED FACTORY WARRANTY Warranty CoverageDatalogic warranties this product against defects in workmanship and materials, for a period of 5 years from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic Scanning (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term. Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the “factory default”configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.Warranty Claims ProcessIn order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair. Warranty ExclusionsThe Datalogic Factory Warranty shall not apply to:(i) any product which has been damaged, modified, altered, repaired or upgraded by otherthan Datalogic service personnel or its authorized representatives;(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage oruse of parts or accessories not approved or supplied by Datalogic;(iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;(iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual;(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that wouldcause internal and external component damage or destruction of the whole unit,consumable items;(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).No AssignmentCustomer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.Risk of LossCustomer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.。

亚伯兰YS01版用户手册1.主要特点JPEG/PDF模式扫描选择300dpi、600dpi、900dpi扫描分辨率选择JPG文件直接保存到MicroSD卡支持MicroSD卡高达32GB免驱动Windows７/Vista/XP和苹果OS10.4或以上（直接插件，无需安装驱动程序）2.功能部件3.状态图标照片将储存在MicroSD卡中电量充足4.如何使用扫描仪4.1安装电池1. 打开电池门.2. 放入两节AA碱性电池到电池盒内.3. 按下[电源/扫描]按钮2秒钟开机.4.2 插入MicroSD存储卡您必须插入MicroSD卡来记录和保存图片.下面介绍如何插入MicroSD储存卡：1.关闭扫描仪2.将MicroSD卡插入卡槽，轻轻按下，直到卡锁存.注意：不要强行将卡插入卡槽，强行插入可能会损坏扫描仪和MicroSD卡.对齐MicroSD卡位置（标记），然后再试一次.注意：扫描前必须先格式化MicroSD卡.4.3 时间设置1. 按[TIME SET]按钮进入时间设置模式.2. 液晶显示屏上显示1XX，按[JPG/PDF & DPI]按钮对XX时行数字切换3. 按[SCAN]按钮确认设置.4. 液晶显示屏显示跳转到下一个设置模式如下顺序：1XX 设置年份2XX 设置月份3XX 设置日期4XX 设置小时5XX 设置分钟5. 所有信息设置完后，再按[TIME SET]按钮退出4.4 格式化MicroSD卡1. 插入一个新的MicroSD卡到扫描仪内，然后打开扫描仪.2. 按格式化按钮，液晶显示屏上显示“F”.3. 按下电源/扫描按钮开始格式化MicroSD卡.4. SD 卡指示灯将闪烁，直到格式化完成.4.5 设置分辨率按[DPI]按钮选择高分辨率/中分辨率/低分辨率.4.6 设置扫描存储模式按[JPG/PDF]按钮，选择JPG/PDF 模式.JPG/PDF 模式图标将显示在液晶屏上.4.7 如何扫描单手操作扫描.在扫描对象上放好扫描仪的位置.握住扫描仪准备开始，按下电源/扫描按钮开始扫描.扫描仪慢慢移动，扫描仪和您的手保持平稳发获得最佳品质的图片. 再次按下电源/扫描按钮停止扫描.5.LED 灯指示“绿色”扫描灯开启:扫描进行中。