【合同协议范文】英文销售合同范文参考

格式：docx
大小：37.73 KB
文档页数：2

下载文档原格式

英文销售合同模板3篇

英文销售合同模板3篇篇1Seller: ________ (Seller's Name)Buyer: ________ (Buyer's Name)This Sales Contract is made on ________ (Date) by and between the Seller and the Buyer:WHEREAS the Seller is willing to sell and the Buyer is willing to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. commodity:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:_______ (Commodity details, including product name, model, quantity, specifications, quality, etc.)II. Origin of the Goods: ________ (Origin of Goods)III. Price and Payment Terms:The Price of the commodity is to be fixed as ________ (Price) only. The payment shall be made as follows:1. A deposit of 10% of the total contract value shall be paid by the Buyer to the Seller's account within ________ (Time Limit) after this contract is signed.2. The balance of payment shall be made by the Buyer against the Seller's presentation of shipping documents through a bank in ________ (Bank Name) within ________ (Time Limit) after the date of shipment.IV. Delivery:篇2SALES CONTRACTThis Sales Contract is made by and between the following two parties:Buyer: ______________ (Hereinafter referred to as "Party A")Seller: ______________ (Hereinafter referred to as "Party B")In accordance with the principles of sincerity and mutual benefit and the relevant laws and regulations, both parties,through friendly consultations, agree to the following terms and conditions for the sale of products:Article 1: Product Description and QuantityProduct name: _______________Product specifications: _______________Product quantity: _______________ (Number of items)Delivery date: _______________Other specific requirements: _______________ (If any)Article 2: Price and Payment TermsTotal contract value: USD _______________ (The total contract value should be clearly stated)Price terms: FOB/CIF/CFR _______________ (Price terms should be clearly stated)Payment terms: _______________% T/T in advance,_______________% against the copy of B/L. Other payment methods such as L/C at sight are also acceptable.Article 3: Delivery and Shipping TermsDelivery time: _______________ (Delivery time should be clearly stated)Port of loading: _______________ (The port of loading should be clearly stated)Means of transportation: By sea/By air/By land, etc. (As agreed by both parties)Other shipping terms and conditions: _______________ (If any)Article 4: Quality Standards and WarrantyQuality standards: in accordance with the standards specified in the contract or the standards commonly used in the international market. If there is no such standard, it shall be agreed by both parties.Other specific quality requirements: _______________ (If any)Article 5: Inspection and AcceptanceArticle 6: Packing and MarkingArticle 7: Delay Delivery PenaltyArticle 8: Settlement of DisputesArticle 9: Other TermsBuyer Signature ____________________________________________ Date ___________________ Seller Signature____________________________________________ Date___________________ （Signature）（Date）（Signature）（Date）请注意，上述合同仅为示例并非专业法律意见。

英文销售合同模板3篇

英文销售合同模板3篇篇1Sales Contract TemplateThis Sales Contract (the "Contract") is entered into between [Seller Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Sale of GoodsThe Seller agrees to sell, and the Buyer agrees to purchase, the following goods (the "Goods"):Description of Goods: [Description]Quantity: [Quantity]Price: [Price]2. DeliveryThe Seller agrees to deliver the Goods to the Buyer at the following location: [Delivery Address]. The Goods shall be delivered on or before the agreed upon delivery date, which is [Delivery Date].3. PaymentThe Buyer agrees to pay the Seller the total purchase price of [Total Purchase Price] in the following manner:- [Payment Method] in the amount of [Deposit Amount] upon signing of this Contract- [Payment Method] in the amount of [Balance Amount] upon delivery of the Goods4. Title and Risk of LossTitle to the Goods shall pass to the Buyer upon delivery. The risk of loss or damage to the Goods shall pass to the Buyer upon delivery.5. WarrantiesThe Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications as set forth in this Contract.6. Limitation of LiabilityThe Seller shall not be liable for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Seller's Country].In witness whereof, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________________Buyer: ______________________________[Signature][Print Name][Title][Date]篇2Sales Contract TemplateThis Sales Contract ("Contract") is made and entered into as of [date] by and between [Seller], with a principal place ofbusiness at [address] ("Seller"), and [Buyer], with a principal place of business at [address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the "Goods"): [description of goods], in accordance with the terms and conditions of this Contract.2. Quantity and Price: The quantity of Goods to be sold and purchased, as well as the price per unit, shall be as set forth in Exhibit A attached hereto and incorporated herein by reference.3. Payment Terms: Buyer shall pay Seller the total purchase price for the Goods within [number] days of the date of delivery of the Goods. Payment shall be made in [currency] by [method of payment].4. Delivery: Seller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.5. Inspection and Acceptance: Buyer shall have [number] days from the date of delivery of the Goods to inspect the Goods and notify Seller in writing of any defects or nonconformities.Failure to give such notice shall constitute acceptance of the Goods by Buyer.6. Warranties: Seller warrants that the Goods shall conform to the specifications set forth in this Contract and shall be free from defects in material and workmanship for a period of [number] days from the date of delivery.7. Limitation of Liability: In no event shall either party be liable for any incidental, consequential, or punitive damages arising out of or in connection with this Contract, whether based on warranty, contract, tort, or any other legal theory.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [state], without regard to its conflicts of laws principles.9. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:_____________________________________[Signature]Buyer:_____________________________________[Signature]篇3Sales Contract TemplateThis Sales Contract is entered into on [Date], by and between [Seller's Name], with a business address at [Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with a business address at [Address] (hereinafter referred to as "Buyer").WHEREAS, the Seller is engaged in the business of selling [Products or Services]; andWHEREAS, the Buyer desires to purchase [Products or Services] from the Seller under the terms and conditions set forth herein;NOW, THEREFORE, in consideration of the mutual promises and covenants set forth in this Sales Contract, the parties agree as follows:1. Products or Services: The Seller agrees to sell and deliver to the Buyer the following products or services: [Detailed description of products/services, including quantity, quality, specifications, and delivery date].2. Purchase Price: The purchase price for the products or services shall be [Amount] per [Unit] for a total of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Payment Method] upon delivery of the products or services.3. Delivery: The Seller shall deliver the products or perform the services at the location specified in writing by the Buyer. Delivery shall be made on or before [Delivery Date], unless otherwise agreed upon in writing by the parties.4. Inspection and Acceptance: The Buyer shall have [Number of Days] days after delivery to inspect the products or services and notify the Seller in writing of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products or services shall be deemed accepted.5. Warranties: The Seller warrants that the products or services will conform to the specifications set forth in this Sales Contract. The Seller further warrants that the products are free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery.6. Limitation of Liability: The Seller's liability under this Sales Contract shall be limited to the purchase price paid by the Buyer for the products or services. In no event shall the Seller be liable for any consequential, incidental, or punitive damages.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of [State], without regard to its conflict of laws principles.IN WITNESS WHEREOF, the parties have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________[Signatures of parties][Printed Names of parties]This Sales Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements, understandings, negotiations, and discussions, whether oral or written. This Sales Contract may be amended only by a written instrument executed by both parties.。

销售合同英文范本6篇

销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of a certain quantity of goods described in this Contract and desires to sell and the Buyer agrees to buy the same on the terms and conditions stipulated below:1. PRODUCTS AND QUANTITYThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Specify the product name, model number, specifications, quantity, etc.] The total quantity to be sold and purchased shall be clearly stated in the invoice.2. PRICE AND PAYMENTThe price of the goods shall be as per the list attached to this Contract. The total amount payable by the Buyer to the Seller shall be [specify the total amount]. Payment terms are as follows: [Insert terms such as deposit payment prior to delivery, full payment upon delivery, etc.] All banking fees shall be borne by the party designated for payment.3. DELIVERY AND TIME OF DELIVERYThe Seller shall deliver the goods to the Buyer at the agreed place of delivery within [specify a reasonable time frame]. Any delay in delivery must be notified to the Buyer in writing. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.4. QUALITY AND GUARANTEEThe Seller guarantees that the goods are new and of good quality, free from defects in material and workmanship, and comply with all applicable specifications and standards. The Seller shall replace any goods found defective within a reasonable period after delivery.5. PACKAGING AND MARKINGThe Seller shall pack the goods properly and ensure that they are clearly marked with necessary identification marks, labels, and other necessary information. The cost of packaging shall be borne by the Seller unless otherwise agreed by the Buyer.6. INSPECTION AND ACCEPTANCEThe Buyer has the right to inspect the goods during production and prior to delivery. Upon receipt of the goods, the Buyer shall have a reasonable period to inspect and accept or reject the goods in accordance with this Contract. Any rejected goods must be returned to the Seller at the Seller's cost and risk.7. FORCE MAJEURENeither party shall be liable for failure to perform any obligation under this Contract due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, fire, etc. However, the affected party shall notify the other party promptly in writing and provide evidence of such occurrence.8. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure and shallnot disclose it to any third party without the prior written consent of the other party.9. TERMINATIONThis Contract may be terminated by either party in writing if there is a breach of any term or condition by the other party that cannot be rectified within a reasonable period of time. Termination shall not affect any obligation that has already been incurred by either party prior to termination.10. MISCELLANEOUSThe Buyer The Seller(Authorized Representative) (Authorized Representative)Date: Date:Signature: Signature:Company Name: Company Name:Address: Address:Telephone No.: Telephone No.:Email Address: Email Address: 邮件地址篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the specifications listed in Annex A attached to this Contract.2. Quantity and Price:The Seller agrees to sell the products in the quantity specified in Annex A at the prices specified therein. The prices are fixed and firm for the duration of this Contract.3. Terms of Payment:Payment shall be made by the Buyer to the Seller as follows: __% (percentage) of the total contract value upon signing of this Contract; __% (percentage) upon delivery of the goods; and the balance upon receipt of the Seller's performance bond or other guarantee documents. All payments shall be made in the currency specified in Annex B.4. Delivery:The Seller shall deliver the products to the port specified in Annex C within the time agreed upon in this Contract. The Seller shall be responsible for arranging transportation of the goods and shall bear all expenses related to delivery.5. Quality Inspection and Warranty:The Seller guarantees that all products are new and of good quality, free from any defects, and comply with all applicable specifications and standards. The Seller shall provide necessary quality inspection certificates and other documents. The Buyer shall have the right to conduct its own quality inspections at the loading port.6. Packing and Marking:The Seller shall pack the products in a proper manner to ensure safe transportation to the port specified in Annex C. The packages shall be properly marked with contract number, product name, quantity, weight, and other necessary information.7. Risk and Insurance:Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in Annex C. The Seller shall arrange for insurance of the goods during transportation at its own cost. The insurance shall cover at least 110% of the total contract value against all risks commonly covered for such goods. The insurance certificate shall be handed over to the Buyer on delivery of the goods.8. Terms of Settlement for Disputes:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller,NOW THEREFORE, the parties hereby agree as follows:Article 1: Contract ProductThe product to be sold under this Contract is [describe the product in detail]. The specifications and quantity of the product are listed in the attached schedule.Article 2: Price and PaymentThe price of the product shall be as stated in the attached schedule. The payment shall be made through [specify payment method] within [specify time frame] after the date of delivery.Article 3: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping address specified by the Buyer. The delivery date shall be as stated in the attached schedule. Shipping and transportation risks shall be borne by [specify which party bears these risks].Article 4: Quality and InspectionThe Seller shall ensure that the product meets the quality standards specified in this Contract. The Buyer shall have the right to inspect the product during production and upon delivery. If any defects are found, the Seller shall promptly replace or repair the product.Article 5: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior written consent of the other party.Article 6: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, wars, riots, or government policies, provided that the affected party promptly notifies the other party of such events and takes reasonable measures to mitigate their effects.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [specify duration] for the product. During this period, any defects in material or workmanship shall be repaired or replaced free ofcharge. The Seller shall also provide after-sales service as specified in the attached schedule.Article 8: TerminationThis Contract may be terminated by either party giving written notice to the other party in case of fundamental breach by either party. The party seeking termination shall give reasonable notice and provide evidence of such breach. The provisions of this Contract concerning confidentiality, warranty, and any obligations arising prior to termination shall survive termination.Article 9: Jurisdiction and LawThis Contract shall be governed by the laws of [specify country/jurisdiction]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/arbitration institution] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the parties for the sale of the product. No modification or amendment shall be binding unless made in writing and signedby both parties. This Contract is made in [specify language] only, and any translation provided for reference only.IN WITNESS WHEREOF, the parties have executed this Contract by their authorized representatives on the dates specified below.Buyer:(Authorized Representative)Date:Seller:(Authorized Representative)Date:[Note: This is a general sales contract template and may need to be modified to fit specific circumstances.]篇4SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller on the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific details of the products to be sold, including name, model, quantity, quality, specifications, etc.].2. Price and Payment:The total contract price is [specify the total contract price]. The payment terms are as follows: [describe the payment terms, e.g., 30% advance payment, balance upon delivery, payment through bank transfer or other methods].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [delivery address]. The delivery date shall be [specify the delivery date]. Any delay in delivery shall be notified to the Buyer in advance.4. Quality Assurance:The Seller guarantees that the products are of good quality and comply with all applicable standards. The Seller shall be responsible for any defects in material or workmanship.5. Warranty:The Seller warrants that the products are new and not previously used. The Seller shall replace any defective products or make necessary repairs during the warranty period.6. Force Majeure:In case of force majeure events, such as natural disasters, war, political unrest, etc., which prevent or hinder the performance of this Contract, the Seller shall notify the Buyer immediately and seek to resolve the issue as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business strategies.8. Termination:This Contract may be terminated by either party in case of breach of any term or condition by the other party. The partyseeking termination shall provide a written notice to the other party specifying the reasons for termination.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify court/tribunal] for resolution.10. Miscellaneous:This Contract is made in duplicate originals, each party holding one original. This Contract shall be governed by and construed in accordance with the laws of [specifycountry/jurisdiction]. Any amendment or modification to this Contract shall be made in writing and signed by both parties. This Contract is effective from the date of signing by both parties.Buyer: _____________________Seller: _____________________Date: _____________________篇5SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller", whereby both parties agree as follows:一、商品条款Article 1: Commodity1. 商品名称：____________________（请填写商品名称）2. 商品规格：____________________（请填写商品规格）3. 单位价格：____________________（请填写单价）4. 总金额：（小写）____________________ （大写）____________________（人民币）二、价格与货币条款Article 2: Price and Terms of Payment1. 除非另有规定，“CIP价格”应包括卖方将货物交运至指定的目的地的所有成本与费用，包括运输成本及保险费。

英文销售合同模板5篇

英文销售合同模板5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on this ___ day of ____, 20__ (the "Effective Date"), by and between [Seller Name], with a principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with a principal place of business at [Buyer Address] (the "Buyer").1. Sale of Goods. Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"), as described in Exhibit A attached hereto.2. Purchase Price. The purchase price for the Goods shall be $____________, payable by Buyer to Seller in the following manner: [Payment terms].3. Delivery. Seller shall deliver the Goods to Buyer's address as specified in Exhibit A. Delivery shall be made on or before [Delivery date]. Buyer is responsible for all shipping and handling costs.4. Inspection and Acceptance. Buyer shall have the right to inspect the Goods upon delivery. Any Goods not conforming to the specifications in Exhibit A shall be rejected by Buyer. Seller shall promptly replace any rejected Goods at Seller's own cost.5. Warranties. Seller warrants that the Goods are free from defects in material and workmanship. Seller further warrants that the Goods will conform to the specifications in Exhibit A. Seller's warranties shall survive acceptance and payment by Buyer.6. Limitation of Liability. In no event shall either party be liable for any consequential, incidental, special, or punitive damages arising from or related to this Contract, whether based in contract, tort, or otherwise.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior discussions, agreements, and understandings.9. Counterparts. This Contract may be executed in counterparts, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.IN WITNESS WHEREOF, the parties have executed this Contract as of the Effective Date.Seller: [Seller Name]By:_____________________________Buyer: [Buyer Name]By:_____________________________Exhibit A - Description of Goods[Description of Goods]This Sales Contract is hereby accepted by the parties hereto as of the Effective Date.[Seller Name]: ___________________________[Buyer Name]: ___________________________篇2Sales ContractThis Sales Contract (the "Contract") is entered into by and between [Seller’s Name], with a registered address at [Seller’s Address] (the "Seller"), and [Buyer’s Name], with a registered address at [Buyer’s Address] (the "Buyer") on this [Date] (the "Effective Date").1. Sale of Goods: The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase from the Seller, the goods described in Exhibit A (the "Goods") in the quantities and at the prices set forth therein.2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit, for a total purchase price of [Total Amount]. Payment shall be made by the Buyer to the Seller in [Currency] within [Number] days of the date of delivery of the Goods.3. Delivery: The Seller shall deliver the Goods to the Buyer at the place of delivery identified in Exhibit A on the delivery date set forth therein. The Seller shall be responsible for all costs associated with packaging, labeling, and shipping the Goods to the Buyer.4. Inspection and Acceptance: The Buyer shall inspect the Goods upon delivery and shall notify the Seller in writing of any defects or discrepancies within [Number] days of delivery. Failure to provide such notice shall constitute acceptance of the Goods by the Buyer.5. Warranty: The Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breachof this warranty, the Seller shall, at its option, repair or replace the defective Goods at no additional cost to the Buyer.6. Limitation of Liability: In no event shall either party be liable to the other for any indirect, consequential, incidental, special, or punitive damages arising from or related to this Contract, including but not limited to loss of profits or loss of business.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ______________________ Date: ____________Buyer: ______________________ Date: ____________Exhibit A: Description of Goods[Provide detailed description of the Goods to be sold, including quantity, model numbers, and any other relevant information]This Sales Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior or contemporaneous agreementsor understandings, whether written or oral. This Contract may not be modified except in writing signed by both parties.篇3Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address] (hereinafter referred to as the "Buyer").1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products (the "Products"):- Description of Product 1- Description of Product 2- Description of Product 32. Quantity: The Buyer agrees to purchase [Quantity] units of each Product listed above.3. Price: The total purchase price for the Products shall be [Total Price] USD. The price includes all taxes, duties, and other charges.4. Payment: The payment shall be made in [Currency] within [Number] days of the date of this Contract. The Buyer shall make the payment by [Payment Method].5. Delivery: The Seller shall deliver the Products to the Buyer's address at [Delivery Address] within [Number] days of receiving the payment.6. Inspections and Acceptance: The Buyer shall inspect the Products within [Number] days of delivery. If the Products do not conform to the specifications in this Contract, the Buyer may reject the Products and the Seller shall replace them at no additional cost.7. Warranties: The Seller warrants that the Products are free from defects in materials and workmanship and conform to the specifications in this Contract. The Seller shall remedy any defects in the Products at its own expense.8. Termination: Either party may terminate this Contract by providing [Number] days' written notice to the other party.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Seller's Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Name: [Seller's Name]Title: [Seller's Title]Buyer:Name: [Buyer's Name]Title: [Buyer's Title]篇4Sales Contract TemplateThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's Address] (the "Seller"), and [Buyer], located at [Buyer's Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"): [Description of Goods].2. Price: The total purchase price for the Goods will be [Price] USD, payable by Buyer to Seller in the following manner: [Payment Terms].3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Address] on or before [Delivery Date]. Any additional costs incurred for delivery shall be borne by Buyer.4. Inspection and Acceptance: Buyer shall have [Number of Days] days from the date of delivery to inspect the Goods and notify Seller in writing of any defects or nonconformities. If Buyer fails to give notice within this time frame, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to the Goods shall pass to Buyer upon delivery. Risk of loss or damage to the Goods shall pass to Buyer upon acceptance.6. Warranties: Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.7. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or special damages arising out ofor in connection with this Contract, even if Seller has been advised of the possibility of such damages.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [State/Country].9. Entire Agreement: This Contract contains the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: ______________________ Buyer: ______________________[Signature] [Signature][Printed Name] [Printed Name][Date] [Date]篇5Sales ContractParties:Seller: [Name of Seller]Address: [Seller’s Address]Phone Number: [Seller’s Phone Number]Email: [Seller’s Email Address]Buyer: [Name of Buyer]Address: [Buyer’s Address]Phone Number: [Buyer’s Phone Number]Email: [Buyer’s Email Address]Date:This sales contract is entered into on [Date].Details of the Sale:The Seller agrees to sell the following goods to the Buyer: - Description of Goods:- Quantity:- Price:- Delivery Date:- Payment Terms:Delivery:The Seller agrees to deliver the goods to the Buyer on or before the agreed-upon delivery date. The Buyer agrees to accept the goods upon delivery.Payment:The Buyer agrees to pay the Seller the agreed-upon price for the goods. Payment shall be made in [Currency] and in [Payment Method].Warranties:The Seller warrants that the goods are of satisfactory quality and fit for the purpose for which they are intended. The Seller also warrants that the goods will be delivered free from any defects.Governing Law:This sales contract shall be governed by the laws of [Country] and any disputes arising from this contract shall be resolved in [City], [Country].Signatures:Seller: ________________________ Date: _____________Buyer: ________________________ Date: _____________This sales contract represents the entire agreement between the Seller and the Buyer and supersedes any previous agreements or arrangements.。

英文版销售合同范本8篇

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

英文版销售合同样本5篇

英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。

英文销售合同范文参考7篇

英文销售合同范文参考7篇篇1甲方（卖方）：____________________乙方（买方）：____________________根据《中华人民共和国合同法》等相关法律法规的规定，甲乙双方在平等、自愿、公平和诚实信用的基础上，就甲方向乙方销售以下商品达成如下协议：一、合同双方甲方（全称）：____________________注册地址：_______________________法定代表人：_____________________乙方（全称）：____________________注册地址：_______________________法定代表人：_____________________二、商品描述1. 商品名称：____________________2. 型号/规格：___________________3. 数量：_______________________4. 质量标准：按照_____________标准执行。

5. 包装要求：___________________6. 价格：总金额为____________美元。

三、交货与验收1. 交货期限：自本合同签署之日起______天内交货。

2. 交货地点：_______________________3. 运输方式：由甲方选择适当的运输方式，费用由乙方承担。

4. 验收标准和方法：按照约定的质量标准，在乙方收到货物后______天内完成验收。

5. 拒收条款：如货物存在质量问题或与约定不符，乙方有权拒收。

四、支付条款1. 付款方式和时间：乙方应在合同签订后______天内支付总金额的______%作为预付款，余款在验收合格后______天内付清。

2. 付款货币：以______货币结算。

3. 滞纳金：如乙方逾期付款，应按逾期金额的一定比例向甲方支付滞纳金。

五、保修和售后服务1. 保修期限：自验收合格之日起______个月。

2. 售后服务条款：甲方需提供相应的售后服务，包括但不限于维修、更换等。

销售合同英文范本8篇

销售合同英文范本8篇篇1SALES CONTRACTThis Sales Contract is made by and between the following two parties:Party A: [Name of Seller]Party B: [Name of Buyer]1. Scope of Contract:This Contract stipulates the terms and conditions for the sale and purchase of the following products: [Product Description, Quantity, Quality, Specifications, etc.] (hereinafter referred to as "Products"). The parties agree to strictly adhere to the terms and conditions set out below.2. Product Description:[Description of the product to be sold, including specifications, quality standards, quantity, etc.]3. Price and Payment:3.1 The total price for the Products shall be [Price in agreed currency].3.2 Payment terms: [Specify payment terms such as T/T in advance, L/C, D/P, etc.]3.3 Any changes to the price or payment terms must be mutually agreed upon in writing.4. Delivery and Shipment:4.1 Delivery Date: [Specify delivery date].4.2 Delivery Location: [Specify delivery location].4.3 Shipping Documents: [Specify required shipping documents].4.4 Risks and responsibilities for the Products shall pass to Party B upon delivery. Any delay in delivery shall be mutually discussed and resolved in writing.5. Quality and Inspection:5.1 Party A shall ensure that the Products comply with the agreed quality standards.5.2 Party B shall have the right to inspect the Products before delivery to ensure quality compliance.5.3 If any defects are found during inspection, Party A shall be responsible for rectifying or replacing the Products as per the agreed terms.6. Force Majeure:In case of any force majeure events such as natural disasters, war, strikes, government policies, etc., which hinder the performance of this Contract, the affected party shall notify the other party in writing within a reasonable period of time and take measures to mitigate the effects of such events. The period of performance may be extended accordingly.7. Warranty:Party A shall provide a warranty for the Products as per the terms and conditions agreed upon by both parties. Any defects in the Products shall be rectified or replaced as per the warranty terms.8. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract and its execution, except for anyinformation that is in the public domain or required to be disclosed by law or regulatory authorities.9. Dispute Resolution:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institution or court] for arbitration/settlement in accordance with [specify applicable laws]. The arbitration award shall be final and binding on both parties.10. Termination:This Contract may be terminated by either party in the event of a breach by the other party which is not rectified within a reasonable period of time. Termination shall be notified to the other party in writing with reasonable grounds for termination stated. The provisions of this Contract which by their nature would survive termination shall remain in full force and effect after termination.篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:whereby both parties agree as follows:1. Scope of Contract(1) The Buyer agrees to purchase the goods listed in Annex I to this Contract from the Seller, and the Seller agrees to sell and deliver the goods to the Buyer on the terms and conditions stipulated below.(2) The total contract value is specified in Annex I.2. Delivery(1) The Seller shall deliver the goods to the port specified in Annex I with all necessary documents in strict accordance with the terms of this Contract.(2) Delivery dates and documents must be issued timely according to the agreed terms of delivery and be clearly indicated on all shipping documents or notice of shipment effected to the Buyers. Otherwise, any losses incurred to theBuyers attributable to delayed shipment or inability to present a satisfactory document will be borne by the Seller in full.(3) The Seller should immediately notify the Buyers byFax/Mail once ship loading of the goods commences and also inform the Buyers of the Contract No., name of vessel, date of shipment, quantity loaded and such other relevant information as regards loading of the goods.3. Terms of PaymentPayment shall be made by irrevocable sight L/C within XX days after receipt of the first shipping advice FAX together with copy of shipping documents through Bank of XXXX Banker to the Seller.4. Quality & Inspection(1) The Seller shall guarantee that all goods shall be of best quality and be promptly fit for ordinary purpose or intended use. If they fail to meet relevant specifications stipulated in this Contract within XX months from their arrival at destination port after unloading from vessel and such failure are due to poor quality, the Seller shall replace them free of charge or compensate for any loss sustained by the Buyers in accordance with the contract price.(2) The quality and quantity of the goods shall be examined by the Inspection Company at the port of destination. If any claim is filed by the Buyers against such Inspection Company’s Inspection Certificate, which is mutually acceptable, within XX days after arrival of goods at port of destination, the Seller shall be responsible for any loss attributable to its poor quality or short weight.5. ClaimsThe Seller shall be responsible for any damage or loss attributable to its poor quality or short weight if claims are made by the Buyers against Inspection Certificate issued by Inspection Company appointed by the Buyers in writing within XX days after arrival of goods at port of destination and confirmed by Inspection Company appointed by both parties jointly before settlement of claims between parties are reached.6. Force MajeureIn case Force Majeure circumstances last for more than XX days, both parties shall negotiate a settlement solution on mutually beneficial basis through friendly discussion.In case Force Majeure circumstances occur during performance of this Contract, both parties should strive forsettlement through friendly discussion in order to minimize losses incurred thereby and continue performance under this Contract after removal of such Force Majeure circumstances as soon as possible.篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: __________________________________Address: __________________________________Country/Region: _____________________________Seller:Name: __________________________________Address: __________________________________Country/Region: _____________________________I. Contract ObjectThe Seller agrees to sell and the Buyer agrees to purchase the following products: (Here insert a detailed list of products, including product name, specifications, quantity, unit price, total value, etc.)II. Terms of DeliveryThe products shall be delivered FOB (Free On Board) _______ (Port of Shipment) on or before the date _______ (Time of Delivery). The Seller shall inform the Buyer of the expected date of dispatch at least 15 days prior to the date of delivery.III. Terms of PaymentPayment shall be made by irrevocable Letter of Credit (L/C) payable at sight. The L/C shall be issued by the Buyer's bank in favor of the Seller's bank and shall be valid for 30 days after the date of shipment as stipulated in this Contract.IV. Quality and InspectionThe products shall be in accordance with the quality standards specified in this Contract. The Seller shall provide a quality certificate as evidence of the quality of the products. The products shall be inspected by a third-party inspection agency mutually agreed upon by the Buyer and the Seller before shipment. If any disputes arise over the quality of the products,the third-party inspection agency's report shall be the basis for settlement.V. Claims and PenaltyIn case of claims due to late delivery or poor quality of the products, the Buyer shall notify the Seller immediately upon arrival of the products at the port of destination. The Seller shall be responsible for any claims that are proved to be valid after investigation. If late delivery exceeds 15 days, the Seller agrees to pay a penalty equal to 1% of the total value of the products for each week of delay. However, such penalty shall not exceed a total of 5% of the total contract value.VI. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, wars, riots, etc., which are beyond its control. If such events continue for more than six months, this Contract may be terminated by mutual agreement of both parties without any liability on either side.VII. Settlement of DisputesVIII. General ProvisionsThe Buyer hereby confirms that they have read and fully understand all terms and conditions stated in this Contract and agree to abide by them. The Seller confirms that they are willing to sell the products specified in this Contract on the terms and conditions stated herein.Buyer: ________________________________ (Signature)Date: ________________ (Date of Signing)Seller: ________________________________ (Signature)Date: ________________ (Date of Signing)Note: This contract is only a sample and should be customized according to specific needs and circumstances before use. It is recommended to have legal counsel review any contract before execution.篇4SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller," whereby the Buyer agrees to purchasefrom the Seller and the Seller agrees to sell to the Buyer the under mentioned commodity subject to the terms and conditions stipulated below:兹有买方[买方名称]与卖方[卖方名称]（以下简称“卖方”）订立本合同，买方同意向卖方购买，卖方同意出售以下列条款规定的商品：Article 1: Commodity商品The commodity to be delivered under this Contract shall be as follows: [商品名称、规格、数量及价格等详细信息]。

英文购销合同范本6篇

英文购销合同范本6篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree as follows:II. Products and SpecificationsThe products to be purchased and sold under this Contract are as follows: ______________ (Please specify the products, specifications, quantity, unit price, total value, etc.)III. Terms of DeliveryThe Seller shall deliver the products to the port/place specified below: ______________ (Delivery location). The mode of transportation, the date of shipment, and the port/place of receipt shall be agreed upon by both parties.IV. Terms of PaymentThe payment terms under this Contract shall be as follows: ______________ (Payment terms such as advance payment, terms of payment, documents required for payment, etc.).V. Quality Inspection and Warranty PeriodThe Seller shall ensure that the products are in conformity with the quality standards specified in this Contract. The warranty period shall be _______________ (Warranty period). During the warranty period, if any defects are found in the products, the Seller shall be responsible for repairing or replacing them at its own cost.VI. Risks and Penalties for Late Delivery or Non-DeliveryIf the Seller fails to make delivery of the products on time or delivers wrong specifications, it shall be responsible for any loss incurred to the Buyer. If the Seller cannot make delivery due to force majeure circumstances, it shall immediately notify the Buyer in writing and take proper measures to minimize the lossof both parties. The risks and penalties for late delivery ornon-delivery shall be agreed upon by both parties.VII. Confidentiality and Intellectual Property RightsVIII. Settlement of DisputesIX. General Clauses1) Force Majeure: Neither party shall be held responsible for failure or delay in performance of its obligations under this Contract due to force majeure causes such as natural disasters, government intervention or other unforeseeable circumstances beyond its control. If such circumstances occur, both parties shall endeavor to resume performance under this Contract as soon as possible after removal of such causes or upon receipt of advice from each other through diplomatic channels.篇2PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: ________________ (Name of Buyer)Seller: ________________ (Name of Seller)WHEREAS the Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. Commodities: ________________ (The specific commodity or products to be purchased and sold, including name, specifications, quantity, etc.)II. Price: ________________ (The agreed price for the commodity, including total price, unit price, currency, payment terms, etc.)III. Quality and Quantity: ________________ (The quality standards, inspection methods, and any applicable tolerance levels for the commodity. The quantity to be delivered by the Seller and accepted by the Buyer.)IV. Delivery:a. Place of Delivery: ________________ (The place where the commodity shall be delivered.)b. Time of Delivery: ________________ (The date or period in which the delivery should be completed.)c. Risks and Expenses: ________________ (The risks and expenses related to delivery such as transportation, insurance, customs clearance, etc.)d. Delay in Delivery: Penalty for delay in delivery if any shall be as per the agreed terms.e. Any other specific conditions related to delivery.V. Payment:a. Terms of Payment: ________________ (The payment terms agreed upon by both parties, such as advance payment, payment on delivery, payment terms in letters of credit, etc.)b. Time of Payment: ________________ (The date or period in which the payment should be made.)c. Late Payment Penalty: Penalty for late payment if any shall be as per the agreed terms.d. Any other specific conditions related to payment.VI. Inspection and Acceptance: ________________ (The inspection procedures, acceptance criteria, and any other related conditions for the commodity.)VII. Claims: ________________ (The procedures and conditions for claims in case of damage or loss of the commodity during transportation or other relevant matters.)VIII. Force Majeure: Both parties shall be entitled to claim compensation for any losses incurred due to force majeure events such as natural disasters, wars, riots, etc., which are beyond their control. The responsibilities of both parties shall be suspended during such events.IX. Confidentiality: Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure unless mutually agreed or required by law.X. Warranty and Guarantee: The Seller shall provide warranty and guarantee for the quality and performance of the commodity as per the agreed terms and conditions. Any defects or non-performance should be rectified by the Seller as per the warranty terms.XI. Termination: The Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide notice to the other party and specify the reasons for termination. The provisions related to claims, confidentiality, warranty andguarantee shall remain valid even after termination of this Contract.In witness whereof, the parties have executed this Contract in ________________ (Place) on the ________________ (Date).Buyer: _____________________ (Signature of Buyer) Title:_____________________ (Title of Buyer) Date: _________________ (Date of Signature)篇3PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:I. Contracting PartiesSeller: ___________________________ (Name of Seller)Address: _________________________ (Address of Seller)Buyer: ___________________________ (Name of Buyer)Address: _________________________ (Address of Buyer)II. Product DescriptionProduct Name: _________________________ (Product Name)Product Code: _________________________ (Product Code)Quantity: _________________________ (Quantity)Specification: _________________________ (Product specifications, including size, color, quality, etc.)Unit Price: _________________________ (Unit Price)Total Price: _________________________ (Total Price)III. Terms of PaymentThe Buyer shall make payment through ________________ (Payment method, e.g., wire transfer, letter of credit, etc.) in full before the delivery date specified in Clause IV.IV. Delivery TermsThe Seller shall ensure delivery of the products to the Buyer's designated location on or before ________________ (Delivery Date). Any delay in delivery shall be notified to the Buyer in advance.V. Quality AssuranceThe Seller guarantees that the products shall be new, of good quality, and comply with all applicable specifications andstandards. The Seller shall be responsible for any defects in material or workmanship.VI. Packaging and ShippingThe Seller shall properly pack and secure the products for shipment to ensure their safe arrival at the Buyer's designated location. The costs of packaging and shipping shall be borne by the Seller.VII. Risk and Title TransferRisk of loss or damage to the products shall be transferred to the Buyer upon delivery at the agreed location. Title to the products shall be transferred upon full payment by the Buyer.VIII. Confidentiality and Non-DisclosureBoth parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business practices. Neither party shall disclose such information to third parties without the other party's consent.IX. Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________________ (Warranty Period) for the products. During this period, the Seller shall repair or replace any defective products at its own cost. TheSeller shall also provide necessary after-sales service support as agreed by both parties.X. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, war, riots, etc. The affected party shall notify the other party promptly and provide reasonable evidence to prove the occurrence of such event.XI. Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute shall be submitted to ________________ (Dispute Resolution Mechanism, e.g., court, arbitration, etc.) for resolution.XII. Miscellaneous Provisions1. This Contract is made in ________________ (Language) and is binding upon both parties. Any amendments or modifications to this Contract must be made in writing and agreed upon by both parties.2. This Contract constitutes the entire agreement between the parties on the subject matter hereof and supersedes all prioragreements, understandings, and communications, whether oral or written.3. The invalidity or unenforceability of any provision of this Contract shall not affect the validity or enforceability of any other provision hereof.4. The laws of ________________ (Country/Jurisdiction) shall apply to this Contract. The courts of ________________ (Country/Jurisdiction) shall have jurisdiction over any disputes arising out of or in connection with this Contract.5. The Buyer may assign this Contract without the prior written consent of the Seller. The Seller may not assign this Contract without the prior written consent of the Buyer. However, either party may assign this Contract to a third party as part of a corporate reorganization or change of control transaction without obtaining prior consent from the other party if such assignment does not materially change the obligations of either party under this Contract.篇4PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:Seller: _________________________ (Name of Seller)Buyer: _________________________ (Name of Buyer)I. Contract Article and Quantity:The Seller agrees to sell and the Buyer agrees to purchase the following goods: (Insert details of the goods, including name, quantity, specifications, etc.)II. Price and Payment:The total contract price shall be ________ (Insert contract price). The payment terms are as follows:a. Deposit: The Buyer shall pay a deposit of ________ (Insert deposit amount) upon signing this Contract.b. Balance Payment: The balance payment shall be made within ________ (Insert payment period) after the delivery of the goods.c. Payment Method: The payment shall be made through________ (Insert payment method, e.g., bank transfer, T/T, etc.)III. Delivery and Shipment:a. Delivery Time: The Seller shall deliver the goods within________ (Insert delivery time) from the date of signing this Contract.b. Shipping Method: The goods shall be shipped by ________ (Insert shipping method, e.g., air, sea, land, etc.) at the Buyer's option.c. Place of Delivery: The place of delivery shall be ________ (Insert place of delivery).d. Risk Transfer: Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the place of destination specified in this Contract.IV. Quality and Inspection:a. Quality Standards: The goods shall be in accordance with the quality standards specified in this Contract.b. Inspection: The Buyer shall have the right to inspect the goods during production and prior to shipment. The Seller shall provide necessary assistance and facilitate such inspections.c. Quality Claim: If any claim is made by the Buyer regarding quality issues, such claim shall be made within ________ (Inserttime limit) after arrival of the goods at the port of destination. The Seller shall promptly address any quality issues raised by the Buyer in accordance with this Contract.V. Packaging and Marks:The Seller shall provide suitable packaging for the goods and ensure that all necessary marks and labels are affixed on each package, including name of goods, quantity, weight, measurements, gross weight, destination address, etc. All packaging must be suitable for long-distance transportation and must withstand normal conditions during transportation and handling without damage to or loss of the contents.VI. Claims and Penalties:a. If any claim is made by the Buyer due to late delivery or any other breach by the Seller, such claim shall be made in writing within ________ (Insert time limit) from the date of arrival of the goods at the port of destination. The Seller shall promptly address any claims raised by the Buyer in accordance with this Contract.b. If the Seller fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the Buyer due to such failure. Penalties for late delivery or breach ofcontract may be imposed in accordance with relevant laws and regulations.c. Any claims or disputes arising from or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such claims or disputes may be submitted to arbitration in accordance with relevant laws and regulations. Any disputes arising from this Contract shall be subject to arbitration in ________ (Insert place of arbitration). The arbitration decision shall be final and binding on both parties.VII. Force Majeure:In case of Force Majeure circumstances such as war, earthquake, flood, fire or other unforeseeable circumstances rendering performance of this Contract impossible or very difficult, both parties should strive to reach agreement on a solution through consultation before invoking Force Majeure as a reason for terminating or postponing performance under this Contract..VIII.. Miscellaneous:This Contract constitutes the entire agreement between both parties pertaining to the subject matter hereof andsupercedes all prior agreements whether written or oral between both parties pertaining to such subject matter. No amendment or modification of this Contract shall be valid unless made in writing signed by both parties..IX.. Entire Agreement/ Governing Law：This Contract constitutes the entire agreement between buyer and seller relating to its subject matter and no further oral promises are made.. This contract is governed by ________ law..X.. Entire Agreement/ Severability：篇5PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree to conclude this Contract subject to the terms and conditions stipulated below:II. Commodities and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodities: _________________ (Commodities) in the quantity specified in the attached Schedule A.III. Price and Terms of Payment1. The total amount of this Contract is ___________________ (USD or other currency), the unit price per metric ton is___________________ (USD or other currency per metric ton). Total quantity and total amount shall be specified in Schedule A.IV. Delivery Time and Place of Shipment篇6Buyer (甲方): _____________________Seller (乙方): _____________________In consideration of the mutual promises and agreements made and intended to be performed under the terms and conditions stated below, the Buyer and the Seller agree as follows:1. Description of Goods （商品描述）The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:（双方在此填写商品名称、规格、数量等详细信息）2. Price and Payment Terms （价格及付款条款）The total value of this contract is ____ USD. （在此填写合同总价）Payment terms: （描述付款方式和条件，例如预付款、尾款、支付方式等）3. Delivery Terms （交货条款）The Seller shall deliver the goods within ____ days after receiving the order confirmation and payment of ____% of the total contract value.（描述交货期限、地点、方式等）4. Quality and Inspection （质量及检验）The Seller shall ensure that the goods are new, sound, in good condition, free from damage and defects, and comply with all applicable specifications and standards. The Buyer shall have the right to inspect the goods before shipment.（描述商品质量标准、检验方式等）5. Risk and Ownership Transfer （风险及所有权转移）Risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the agreed place of delivery. Ownership of the goods shall transfer to the Buyer upon full payment of the contract price.（描述风险和所有权转移的细节）6. Warranty and Guarantee （保修及保证）The Seller shall provide warranty and guarantee for the goods in accordance with the contract and applicable laws.（描述保修期限、保修范围、保证事项等）7. Force Majeure （不可抗力）If either party is prevented from performing its obligations due to force majeure, it shall promptly notify the other party in writing and take reasonable measures to minimize the loss.（描述不可抗力事件的认定和处理方式）8. Settlement of Disputes （争议解决）Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to ____ for arbitration.（描述争议解决的方式和机构等）9. General Terms （通用条款）（在此添加任何其他适用的通用条款，例如保密义务、合同修改、适用法律等）10. Miscellaneous （其他事项）This contract is made out in ____ copies, ____ for the Seller and ____ for the Buyer.（描述合同份数等）The parties have read and understood all the terms and conditions stated above and have signed this Agreement in witness thereof.（双方已阅读并理解以上所有条款和条件，并已签署本协议为证。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

英文销售合同范文参考
合同 CONTRACT 日期：合同号码：Date: Contract No.:
买方： (The Buyers) 卖方： (The Sellers) 兹经买卖双方同意按
照以下条款由买方购进，卖方售出以下商品： This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter: (1) 商品名称: Name of Commodity： (2) 数量： Quantity: (3) 单价： Unit price: (4) 总值： Total Value: (5) 包装： Packing: (6) 生产国别： Country of Origin : (7) 支付条款： Terms of Payment: (8) 保险： Insurance: (9)
装运期限： Time of Shipment: (10) 起运港： Port of Lading: (11) 目的港： Port of Destination: (12)索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不符，除属保险公司或船
方责任外，买方有权凭中国商检出具的检验证书或有关文件向卖方索
赔换货或赔款。

Claims: Within 45 days after the arrival of
the goods at the destination, should the quality, Specifications or quantity be found not in conformity with
the stipulations of the contract except those claims for
which the insurance company or the owners of the vessel are liable. The Buyers shall, have the right on the strength of
the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers. (13)不可抗力：由于人力不可抗力的原由，发生在制造、装载或运输
的过程中导致卖方延期交货或不能交货者，卖方可免除责任。

在不可
抗力发生后，卖方须立即电告买方及在14天内以空邮方式向买方提供
事故发生的证明文件，在上述情况下，卖方仍须负责采取措施尽快发货。

Force Majeure: The sellers shall not be held responsible
for the delay in shipment or non-deli-very of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after. The Sellers shall send by airmail to the Buyers for their acceptance certificate of the accident. Under such circumstances the Sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. (14）仲裁：凡有关执行合同所发生的一切争议应通过友好协商解决，如协商不能解决，则将分歧提交中国国际贸易促进委员会按有关仲裁程序进行仲裁，仲裁将是终局的，双方均受其约束，仲裁费用由败诉方承担。

Arbitration: All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. In case no settlement can be reached, the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission. The Arbitration committee shall be final and binding upon both parties. And the Arbitration fee shall be borne by the losing parties.
买方：卖方: （授权签字）（授权签字）。

【合同协议范文】英文销售合同范文参考

合集下载

英文销售合同模板3篇

英文销售合同模板3篇

销售合同英文范本6篇

最新英文销售合同模板6篇

英文销售合同模板5篇

英文版销售合同范本8篇

英文版销售合同样本5篇

英文销售合同范文参考7篇

销售合同英文范本8篇

英文购销合同范本6篇

文档推荐

最新文档