malhotra 05_sp

The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information . UNLESS VALSPARAGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALLIMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE ORDate: June 1, 2010(supersedes all previous revisions)Valtec ™ Pre-Catalyzed White Lacquers-550 VOC-HAPs Free TECHNICAL DATA SHEETPHYSICAL PROPERTIES (objective specifications) NUW3114- Soft GlossNUW3112- Satin Viscosity: Weight Solids: Volume Solids: Weight/Gallon: Theoretical Coverage: Flash Point: Air Quality Information: VOC: AIM VOC: VOC Ratio VHAP: Photochemically Reactive?: 23-27 sec EZ Zahn 2 41.56-41.78%23.43-23.58%8.9-8.91 1bs/gal375.9-378.3 ft/gal @ 1 mil dry22ºF Closed Cup2.90-2.92lbs/gal of Product534.86-534.92 g/l0.78lb VOC/lb solid0.0lb VHAP/lb solidNo Valspar’s Valtec™ Pre-catalyzed White Lacquers are highly versatile premium quality finishes formulated to offer excellent durability combined with outstanding ease of use. They are fast drying and easy to apply with excellent hiding and sanding properties. They offer excellent mar, solvent, and chemical resistance. When properly applied with their companion undercoat, the film properties of this system provide a tough, durable finish that passes all KCMA performance standards. These products can also be used as a white/pastel base and the containers are short filled for easy tinting. This product is designed for professionalapplication only. For Wood Substrates Only.OTHER INFORMATION •Surpasses all KCMA performance standards •Superior scratch, impact, mar, and general chemical resistance •Good UV protection •Ready to spray •Outstanding flow and leveling characteristics •Controlled tint strength •Short filled containers for easy tinting (120 oz) •Excellent hiding properties •Easy to sand with excellent recoatability • HAPs Free Dry Times (78°F, 50%RH): Air Dry To Touch/Handle: 15-20 minutes To Sand/Recoat: 30-45 minutes To Stack: 16-24 hours @77˚F Force Dry To Flash: 8-10 minutes To Bake: 15 minutes @125° Cool Down: 10 minutes To Stack: 2 hours after cool down Shelf life: 1 year from the manufacturing dateReduction: No thinning is recommendedApplication Equipment: Use only equipment with plastic,stainless steel, or Teflon coated valves and partRecommended Tip Sizes:Conventional Air 0.070-0.086HVLP 0.070-0.086Airless 10-15 thousandthsAir Assisted Airless 11-15 thousandthsNote: All information provided is typical (as formulated) andwill not represent exact values for every product. For specificAir Quality Data for each product, VOC reports are availableupon request. NUW3110- Valtec™ White Pre-catalyzed Lacquer Undercoat-550 VOC Valtec™ 550 VOC lacquers These products are recommended for professional application and are designed for interior use only. Always pre-test the system on your substrate and under your line conditions to verify suitability to the application and to avoid potential need for costly refinishing. Valspar Wood Finishes products are designed to protect and enhance thenatural beauty of wood, but cannot eliminate naturaldiscoloration or deterioration of wood as it ages.Additional notes:Do not mix with other finishing systems or deviate fromthese finishing recommendations. Valspar will not be heldliable for finish failures resulting from the mixing ofproducts or deviations from finishing recommendations.FINISHING RECOMMENDATIONSGeneral: Surface must be clean and dust free with moisture content of 6-8% prior to finishing. Remove all dirt, dust, wax and wood marks. Proper sanding and preparation of the wood is critical to achieving consistent results. New Wood: Finish sand surface (150-180 grit) and remove all sanding dust.Painted or Varnished Wood: Remove all paint or varnish then follow new wood instructions.Before using, mix product by hand, or use mechanical agitation such as an air mixer until there is no material on the bottom of the container. All products should be stirred well before use and, for best results, continuously agitated while in use.General: Always pre-test the system on your substrate to verify suitability of the application.First-Prime the wood with NUW3110 Valtec™ Pre-Catalyzed White lacquer Undercoat-550VOC for best results. Tinting: This product can be tinted with approved, high quality industrial colorants such as Opticolor XP. (Check with your Valspar Distributor for other approved colorants). NEVER tint with colorants that contain glycol. Maximum tint load is 4 oz per gallon (3% by volume). Colorants must be mixed in completely with mechanical agitation before use. Apply by spray only, using Conventional Air, HVLP, Airless, or Air Assisted Airless equipment. Apply at a rate of 3-4 wet mils per coat. Sand between coats with 240-320 grit, no fill sandpaper. Remove sanding dust before applying the next coat. This finish must be sanded between coats for proper adhesion. DO NOT APPLY more than three coats at 3-4 wet mils per coat when used in conjunction with the undercoat. Maximum film thickness of the total coating system MUST NOT EXCEED 4 dry mils.Dry to Touch:15-20 minutesDry to sand and recoat: 30-45 minutes (depending on ambient conditions).Do not apply if the material or substrate temperature is below 55ºF.This product is best applied when surface and air temperatures are between 55º-90º F (~12-32°C) and when relative humidity is below 50% during application and drying time.Refer to your local regulations for compliance requirements for cleaning solvents. Dispose of dirty solvent and cleaning rags in a safe and compliant manner. Solvent or lacquer soaked rags should be stored in water-filled, closed containers prior to disposal.Store in a cool, dry place. Close all containers after use. Do not store near heat or sparks. Spills should be cleaned up with non-sparking tools. See the product MSDS for complete safety information.Always pre-test the system on your substrate and under your line conditions to verify suitability to the application and avoid potential need for costly refinishing. All dry times listed are as tested under ideal indoor environmental conditions of 78°F (26°C) with relative humidity not exceeding 50%. These products are recommended for use under temperature conditions of 55º-90º F (~12-32°C)and when relative humidity is below 50% during application and drying time. Low temperatures, poor air circulation or high humidity will extend dry times. Valspar strongly recommends against use of these products if temperatures of air, material, or surface to be coated are below 55°F (12°C) or below the dew point. Abnormal conditions of temperature or humidity may adversely affect product performance. Please contact your authorized Valspar Wood Finishes distributor for additional product use recommendations and finishing guidance.The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPARAGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALLIMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR。

• • • •
微量试管和样本杯同样本试管一同放入样本架上 将样本架直接放进SPINCHRONTM DLX 离心机里 离心后，将样本架直接放在分析仪上 具备样本条码扫描功能，减少劳动力及人为错误
带条码的试剂盒
• 三个联体独立的试剂仓，使在机试剂稳定性最 大化，并使操作更简便 • 自动跟踪在机试剂的总量，条码试剂显示:
– – – – 批号和序列号 失效日期 校准频率 试剂盒内测试量
• 试剂盒存储于4℃冷藏室内
液体ห้องสมุดไป่ตู้试剂、校准品和质控品 液体的试剂、
• 试剂、校准品和质控品均为液体，开瓶即用， 免除复溶步骤及由于复溶的等待时间
干式免维护的孵育系统
• 以紫铜为介质的接触型干式保温系统 • 相面接触的保温环套环绕比色杯，控温精确， 减少光散射，信号衰减少，确保结果的准确性 • 消除普通空气浴系统的温度的波动 • 免除水浴系统的日常维护
增加不确定性 增加不确定性
二级校准品
贝克曼库尔特 工作校准品 贝克曼库尔特 产品校准品
MFR 厂商） （厂商）
用户常规样本
用户常规方法
测定结果
LAB （实验 室）
总 结
• 悠久的专业历史背景 历史背景 • 行业领先的全球性的检验专业品牌 专业品牌 • 技术先进，性能 性能卓越 技术 性能
– 准确度：系统化、标准化、结果可溯源的检测系统；先进而独特的技术 准确度： 和功能（血清外观检测功能；凝块检测与自动重检功能；多波长同时检 测技术等），保证了检验质量 – 高效率：两大分析技术的应用（光谱分析和离子选择性电极）；标配样 高效率： 本及试剂条码阅读器；可离心的样本架；可以不停机连续装载样本，并 可以在运行中装载试剂；样本预稀释功能；超范重检功能；自待机（ STANDBY）到运行（加试剂或样本）仅需2分多钟；在1分钟内处理5项 电解质项目；24小时不停机运行，满足临床常规和急诊的需要，真正实 现一机多用；半导体接触式传导恒温系统，免除日常维护保养；远程通 讯功能 – 低成本：长寿命的光源（闪烁式氙灯）；永久性的石英反应比色杯；高 低成本： 质量的电极和试剂；最少的用水量（每小时用水量小于7.0升），使耗材 更少，使用成本更低

PACKAGING INFORMATIONOrderable DeviceStatus (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)6N135OBSOLETE PDIP N 8TBD Call TI Call TI 6N136OBSOLETE PDIP N 8TBD Call TI Call TI HCPL4502OBSOLETEPDIPN8TBDCall TICall TI(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS)or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues totake reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.PACKAGE OPTION ADDENDUM8-Apr-2005Addendum-Page 1IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。

i
简介
所有权通告
本手册中包含的信息源自 X-Rite, Incorporated 的专利和专有资料。制 定本手册的目的仅在于为该仪器的使用和一般维护提供支持。 本手册中的内容乃 X-Rite, Incorporated 的财产并归其版权所有。 严禁全部或部分复制。发布本信息并不意味着您有任何权利复制或使 用本手册用于除安装、操作或维护本仪器之外的目的。事先未经 X-Rite, Incorporated 书面许可，不得以任何形式或电子、电磁、机 械、光学、人工或其它的任何方式，复制、抄写、转录本手册的任何 部分，不得将其存储在检索系统中，或翻译成任何一种语言或计算机 语言。 本仪器可能涉及一项以上专利。有关实际专利号，请参看仪器。 版权所有 © 2004 X-Rite, Incorporated “保留所有权利”
FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.