明纬导轨式开关电源NDR-240-SPEC资料手册

图片来源：2020February明纬[MEAN WELL]成立于1982年，为世界标准交换式电源供应器领导品牌制造商之一。

目前在全球设有共三座生产基地（台湾、广州花都区、苏州）及五家财务独立之关联企业（台湾、美国、欧州、广州与苏州）。

明纬产品包含：AC/DC交换式电源、DC/DC转换器、LED防水电源、适配器（Adaptor）、电池充电器（Charger）以及DC/AC逆变器（Inverter）。

目前已超过10000种标准电源机型，广泛应用于医疗、工业自动化、电子、通讯、LED照明等领域。

明纬累积近40年经验，产品已经大量并广泛地被使用在LED显示屏,同时因其产品具备高信赖性及最佳性价比等特点，在客户端已经取得良好的品牌声誉及市场占有率。

多年来更致力于研发绿色节能电源产品。

美国明纬1研发团队不断精益求精，陆续推出新一代150~500W LED显示屏电源解决方案，电源均采用薄型化设计,可使得显示屏单元箱体设计更趋薄型和轻量化，便于运送安装；全系列产品更采用高效率节能线路设计，能有效降低电能耗用。

除提供单组及双组等多种机型选择之外，产品并符合UL、CUL、TUV、CCC、CB、CE等多项国际安规与电磁兼容测试标准与认证，适合于室内外LED电子广告牌、LED显示屏、小间距显示屏、LED字幕机以及LED电视墙等应用。

具备近40年的标准电源产品研发及制造经验，明纬公司拥有12大产品线，超过10000种标准电源产品，为客户提供【一站式】电源解决方案。

每一款产品从技术研发、设计、试作、设计验证(DVT)、设计品质测试(DQT)、选料、试产、认证、量产等，均通过严谨的设计与生产及品质管控程序与测试验证规范标准。

明纬在全球拥有200多家备库存之经销商，产品透过全球80多个国家地区。

样品于24小时内即可迅速提供，且没有最小订购量限制。

若您正在寻找高信赖度，品质稳定，价格合理、产品系列齐全的电源供应商，拥有最完整解决方案的明纬公司将是您的首选!苏州明纬台湾明纬广州明纬天河研发中心广州明纬花都产业园23ISO14000证书ISO9001证书ISO45001证书[MEAN WELL]的品牌意涵为[善意的标志， 品质的执着]。

台湾明纬开关电源单组输出功率：从15W-2KW，型号齐全；低价，高可靠；效率高，工作温度低；尺寸小，重量轻；内置滤波器,低纹波；内附突入电流抑制电路；一年保修；满载烧机测试；库存现货齐全,交货期短..台湾明纬开关电源2组输出功率：从30W-155W，型号齐全；低价，高可靠；效率高，工作温度低；尺寸小，重量轻；内置滤波器,低纹波；内附突入电流抑制电路；一年保修；满载烧机测试；库存现货齐全,交货期短；…台湾明纬开关电源三组输出功率：从30W-155W，型号齐全；低价，高可靠；效率高，工作温度低；尺寸小，重量轻；内置滤波器,低纹波；一年保修；满载烧机测试；库存现货齐全,交货期短；…台湾明纬开关电源四组输出功率：60W、120W、180W；低价，高可靠；效率高，工作温度低；尺寸小，重量轻；内置滤波器,低纹波；内附突入电流抑制电路；满载烧机测试；内置外壳式开关稳压电源高性能G3系列明纬开关电源河南总经销！广州明纬电源深圳明纬电源明纬电源北京代理深圳明纬电源明纬电源网站台湾明纬电源官网 24v明纬电源型号如下：内置外壳型交换式电源供应器－高性能G3系列RS-25 RS-35 RS-50 RS-75 RS-100 RS-150 RD-35 RD-50 RD-65 RD-85 RD-125 RID-50 RID-65 RID-85 RID-125 RT-50 RT-65 RT-85 RT-125 RQ-50 RQ-65 RQ-85 RQ-125内置外壳型交换式电源供应器－泛用型G2系列S-25 S-40 S-60 S-100F S-150 S-240 S-250 S-320 T-40 T-60 T-120 T-115 D -60 D-120 ID-60 Q-60 Q-120 Q-250 IQ-60 IT-60 SE-600内置外壳型交换式电源供应器－经济型G1系列S-15 S-35 S-50 S-100 S-145 S-201 S-350 D-30 D-50 ID-30 ID-50 T-30 T-5 0内置外壳型交换式电源供应器－PFC系列SP-75 SP-100 SP-150 SP-200 SP-300 SP-320 SP-480 SP-500 SP-750 TP-75 TP-100 TP-150 QP-100 QP-150 QP-200 QP-375 USP-225内置外壳型交换式电源供应器－附带UPS功能型AD系列ADS-55 AD-55 ADD-55 ADS-155 AD-155 ADD-155内置外壳型交换式电源供应器－模组化系列MP-450 MP-650 MP-1000 MS-75 MS-150 MS-300 MD-100广州明纬电源深圳明纬电源明纬电源北京代理深圳明纬电源明纬电源网站台湾明纬电源官网 24v明纬电源内置外壳型交换式电源供应器－轨道型系列DR-45 DR-75 DR-120 DRP-240 DRP-480 DRP-480S DRT-240 DRT-480 DRT-960内置外壳型交换式电源供应器－并联系列PSP-300 PSP-500 PSP-600 PSP-1000 PSP-1500 RSP-1500 SCN-600 SCN-800 SCN-1K2 SCN-1K5 SCN-2K0 SCP-600 SCP-800 SCP-1K2 SCP-2K4内置PCB型交换式电源供应器－板上型OFM-5000 OFM-0100 OFM-1500 OFM-0200内置PCB型交换式电源供应器－泛用型PS-25 PS-45 PD-65 PD-45 PD-25 PD-110 PT-45 PT-65 PT-4503 PT-6503 PS-65 PTsb-50 PTsb-75 PQ-100 PPQ-100 PPS-125 PPT-125 LPS-50 LPS-75 LP S-100 LPP-100 LPP-150内置PCB型交换式电源供应器－医疗类MPS-30 MPS-45 MPS-65 MPS-120 MPD-45 MPD-65 MPD-120 MPT-45 MPT-65 MPT-120 MPQ-120外置型交换式电源供应器－充电型PA-120 PB-120 PS-120 ESC-120 ESP-120 ESP-240外置型交换式电源供应器－桌上型GI-12 ES18A ES18B ES18C ES25A ES25B ES25C P25A P25B P30A P30B P40A P4 0B P50A P66A U65S外置型交换式电源供应器－医疗用桌上型MES-30A MES-30B MES-30C外置型交换式电源供应器－插墙型NP-12 ES18U ES18E ES25U ES25EDC/AC直流/交流转换器－修正正弦波150W 300W 600W 1000W 1500W 2500WDC/AC直流/交流转换器－纯正弦波150W 300W 600W 1500W广州明纬电源深圳明纬电源明纬电源北京代理深圳明纬电源明纬电源网站台湾明纬电源官网 24v明纬电源。

●Type：LED Power Supply（Families：AP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD, PLC, PLD, PLM, PLN, PLP, PWM, ULP）●IntroductionThe LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.Mean Well’s LED power supplies include metal case, plastic case, and PCB types.●Installation（1）Before commencing any installation or maintenance work, please disconnect the power supply from the utility.Ensure that it cannot be re-connected inadvertently!（2）Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be kept when the adjacent device is a heat source.（3）Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current. Please refer to the specification sheet to receive the optimum mounting position and information about the de-rating curve.（4）Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.Please refer to its specification.（5）For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting fixture is tight so that water cannot intrude into the system.（6）For dimmable LED power supplies, make sure that your dimming controller is capable of driving these units. For ELN series, either “D” or “P” type, require40mA each unit; for those with “3 in 1” dimming function, e.g. HLG and LPF series, require 0.15mA each unit.（7（a）Connect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this step can be skipped when the unit is marked class II, ungrounded.（b）Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).（c）Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).（8）The maximum number of the LED PSUs that can be connected to a circuit breaker at 230V is shown as below.Note: These calculated values are based on MCB S200 series manufactured by ABB except for HVG/HVGC series, which are calculated by using MCB S260 series of the same manufacturer.（9）For other information about the products, please refer to for details.Warning / Caution !!（1）Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not remove the case of the power supply by yourself!（2）Risk of irreparable damage. LED power supplies with IP64 to IP66 rating must be located indoors or in a location where these units can be sheltered from the rain if outdoors.（3）Please do not install LED power supplies in places with high ambient temperature or close to fire source.Please refer to the specifications about the maximum ambient temperature limitations.（4）Output current and output wattage must not exceed the rated values on the specifications.（5）The FG ( ) must be well connected to PE(protective earth) if the unit equips with it.（6）All MW’s PSUs are designed in accordance with EMC regulations and the related test reports are available by request. Since they are belong to component power supplies and will be installed inside system enclosure, when they are integrated into a system, the EMC characteristics of the end system must be re-verified again. Manufacturer：MEAN WELL ENTERPRISES Co., LTD.No.28, Wuquan 3rd Rd., Wugu Dist.,New Taipei City 24891, TaiwanTel: +886-2-2299-6100Web: Branch Office：ChinaMEAN WELL (GUANGZHOU) ENTERPRISES Co., LTD.2F, A Building, Yuean lndustry Park, Huangcun,Dongpu Yown, Tianhe District, Gungzhou, ChinaPost Code:510660Tel: +86-20-2887-1200Web: U.S.A.MEAN WELL USA, INC.44030 Fremont Blvd., Fremont,CA 94538, U.S.A.Tel: +1-510-683-8886Web: EuropeMEAN WELL EUROPE B.V.Langs de Werf 8, 1185XTAmstelveen, The NetherlandsTel: +31-20-758-6000Web: www.meanwell.euDeclaration of China RoHS ConformityIn order to reduce the impacts on the environment and take the more responsibility for protecting the earth, MEAN WELL is confirming and announcing the conformity to China RoHS, an Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products.Environment Friendly Use Period LabelNames and Contents of Hazardous Substances Lists。