AVANT BROWSER入手教程

InternetDownloadManager序列号是一款针对该软件而量身打造的激活程序，可以让原本收费的软件变成免费的，它可以将你电脑设备的信息直接写入到软件得许可证中，从而达到免费授权的目的！最为关键的是本激活工具安全无毒，不会对软件本身有任何的影响，大家可以放心的下载使用！而作为资源下载领域中的佼佼者Internet Download Manager软件可以说极为受欢迎，它采用了当下最为先进的下载技术，具备多媒体下载、自动捕获链接、自动识别文件名、批量下载、定时下载、自动站点抓取、队列等等一系列功能；即便时突然的断电、断网下载任务也不会失效，当恢复时便会自动继续下载；最为关键的还软件没有广告，内置了视频、音频播放器，下载就能播放，非常人性化！破解教程1：安装完成之后点击“完成”即可。

2：打开IDM安装的目录，如果你没有修改安装位置，一般在：C:Program Files (x86)Internet Download Manager这个文件夹里。

3：将破解补丁放到软件的根目录下。

运行补丁。

4：点击破解IDM按钮，进行破解软件。

5：破解完成之后关闭破解补丁软件即可。

软件功能1、支持所有流行的浏览器和应用程序!软件支持所有流行的浏览器，包括IE，Chrome，AOL，MSN，Mozilla，Netscape，Firefox，Avant Browser等等。

支持所有流行浏览器的所有版本，并且可以集成到任何Internet应用程序中，以使用独特的“高级浏览器集成”功能接管下载。

2、下载速度加速。

由于其智能动态文件分段技术，idm 2021最多可将下载速度提高5倍。

与其他下载管理器和加速器不同，软件会在下载过程中动态下载文件并重新使用可用连接而无需额外的连接和登录阶段，以实现最佳加速性能。

3、只需点击一下即可轻松下载当您单击浏览器中的下载链接时，IDM将接管下载并加速下载。

您不需要做任何特殊的事情，只需像往常一样浏览互联网。

Page 1Ultra96 Getting Started GuideVersion 1.0Document ControlDocument Version: 1.0Document Date:27 June 2018Page 2Contents1Getting Started with Ultra96 (5)2What’s Inside the Box? (5)2.1Optional add-on items: (5)3What’s on the Web? (6)3.1Official Documentation: (6)3.2Tutorials and Reference Designs: (6)3.3Trainings and Videos: (6)4Ultra96 Key Features (7)5Ultra96 Basic Setup and Operation (9)6Example Design (10)7Hardware Setup (10)8Connect to Webserver (11)9Ultra96 GPIO LEDs Example Project (13)10OpenAMP Matrix Multiplication (14)11Additional Example Projects (14)12Custom Content Tutorial (15)13Smart Tutorial (16)14Using Ultra96 Tutorial (16)15Access Ultra96 Linux Terminal over SSH (17)16INA226 Current Sensor (19)17Power Off (20)18Getting Help and Support (21)18.1Avnet Support (21)18.2Xilinx Support (22)19Installing and Licensing Xilinx Software (23)19.1Install Vivado Design Suite, Design Edition (23)20Certification Disclaimer (27)21Safety Warnings (27)22RF Certification (27)Page 3FiguresFigure 1 – Ultra96 (5)Figure 2 – Ultra96 Block Diagram (8)Figure 3 – Ultra96 Topology (9)Figure 4 – Ultra96 Switch Location (10)Figure 5 – MicroSD Card Boot Mode (11)Figure 6 – Connect to Ultra96 Webserver (12)Figure 7 – Ultra96 GPIO LEDs (13)Figure 8 – OpenAMP Matrix Multiplication (14)Figure 9 – Ultra96 Tutorials/Guides (15)Figure 10 – TeraTerm New Connection (17)Figure 11 – SSH Terminal Settings (18)Figure 12 – SSH Authentication (18)Figure 13 – Ultra96 Terminal (19)Figure 14 – I2Cdetect (19)Figure 15 – Reading INA226 Device (20)Figure 16 – Voucher Confirmation (24)Figure 17 – Generate Node-Locked (24)Figure 18 – Select Host Information (25)Page 4Page 5 1 Getting Started with Ultra96The Avnet Ultra96 enables hardware and software developers to explore the capabilities of the Zynq® UltraScale+™ MPSoC . Designers can create or evaluate designs for both the Zynq Processor Subsystem (PS) and the Programmable Logic (PL) fabric.Figure 1 – Ultra96This Getting Started Guide will outline the steps to setup the Ultra96 hardware. It documents the procedure to run a PetaLinux design running on the Quad-core ARM Cortex-A53 MPCore Processing System (PS).2 What’s Inside the Box?∙Ultra96 development board ∙Pre-programmed 16GB microSD card with SD adapter and jewel case ∙Voucher for SDSoC license from Xilinx ∙Quick Start Instruction card 2.1 Optional add-on items: ∙External 96Boards compliant power supply kit (12V, 2A, US plug) (AES-ACC-U96-PWR) ∙USB-to-JTAG/UART pod for Ultra96 (AES-ACC-U96-JTAG) ∙∙3 What’s on the Web?Ultra96 is a community-oriented kit, with all materials being made available through the community website.3.1 Official Documentation:∙Getting started guide∙Hardware user guide∙Schematics∙Bill of materials∙Layout∙PCB net lengths∙Mechanical drawing∙3D Model∙Board definition files for Vivado integration∙Programmable logic (PL) master user constraints3.2 Tutorials and Reference Designs:∙Ultra96 Bare Metal Hardware Platform Creation∙Ultra96 Bare Metal Microchip USB-UART∙Ultra96 Bare Metal Test Application Development∙Ultra96 Bare Metal Boot Techniques∙Ultra 96 Factory Restore Image∙Ultra96 Accelerated Image Classification3.3 Trainings and Videos:∙Introduction to Ultra96Page 64 Ultra96 Key Features∙Zynq UltraScale+ MPSoC ZU3EG SBVA484∙Memoryo Micron 2 GB (512M x32) LPDDR4 Memoryo MiroSD SocketShips with Delkin Utility MLC 16GB card∙ Wi-Fi / Bluetooth∙ DisplayPort∙ 1x USB 3.0 Type Micro-B upstream port∙ 2x USB 3.0 Type A downstream ports∙ 40-pin Low-speed expansion header∙ 60-pin High speed expansion header∙ Mounted on thermal bracket with fanNote that there is no on-board, wired Ethernet interface. All communications must be done via USB, Wi-Fi, JTAG, or expansion interface.Page 7Page 9 5 Ultra96 Basic Setup and OperationThe functionality of the Ultra96 is determined by the application booted from the non-volatile memory – by default that is the SD Card. This Getting Started Guide allows system developers to exercise and demonstrate multiple circuits through PetaLinux, including:∙SSH Terminal Access ∙GPIO LEDs ∙Wi-Fi ∙ I2C Sensor DetectIn addition to the items included in the kit, you will also need the following to complete the exercises in this tutorial.∙ Wi-Fi connectionAn Ultra96 image in its expected out-of-box configuration is shown below along with various topology components highlighted.Figure 3 –Ultra96 Topology6 Example DesignThe Ultra96 ships with an example image loaded in the 16GB microSD Card. If your microSD Card image has been corrupted or deleted, there is Ultra 96 Factory Restore available at that will go into detail on how to restore your factory image.7 Hardware Setup1. A terminal program is required. TeraTerm was used in this example which can bedownloaded from the TeraTerm project on the SourceForge Japan page:ttssh2.sourceforge.jp Install TeraTerm or another terminal program of your choice.2. Plug in your 12V Barrel Jack power supply into a wall outlet and then connect the barreljack to J5 on your Ultra96. Your Ultra96 should be powered down at this point. Note: DC power supply is not included in the Ultra96 kit but can be purchased separately.3. Set the Ultra96 boot mode switch SW2 to SD Card boot mode as shown below.Figure 4 – Ultra96 Switch LocationPage 108 Connect to Webserver1. Press and release the power button (SW3). The Green Power On LED (DS9), RedINIT_B LED (DS7) and the Green User LEDs should illuminate. After a few seconds, INIT_B LED will turn off and the Green DONE LED (DS6) will illuminate. At 15 seconds, the Blue Bluetooth Enable LED (DS1) will illuminate. At 30 seconds, the Yellow Wireless LAN Enable LED (DS8) will illuminate.2. After about 40 seconds, a new Wi-Fi SSID will be discoverable, named“Ultra96_<MAC_ID>” which is unique for each board. Connect the Wi-Fi on your PC to this SSID.Page 11Figure 6 – Connect to Ultra96 Webserver3. Now that we are connected to the Ultra96, we should open up the webserver. Open aninternet browser window and navigate to the following address : http://192.168.2.14. You will be directed to the webserver’s home page for Ultra96. Here you will be able toview example projects, custom contents and various tutorials for Ultra96.Page 129 Ultra96 GPIO LEDs Example Project1. Next we want to access the Ultra96 GPIO LEDs example project. From the Ultra96 homepage select Ultra96 GPIO LEDs example projectFigure 7 – Ultra96 GPIO LEDs2. All LEDs will be at an unknown state to begin with. Select the drop down menus andbegin changing the status of the GPIO LEDs. You will notice that the four LEDs (located in between the two USB connectors J8/J9) update in real time.3. Scroll to the bottom of the webpage and you will see a definition table for various LEDselection options.4. Something of interest may be setting LEDs 0 and LEDs 1 to phy0tx and phy0rxrespectively.5. Now as you navigate throughout this webserver you will notice the Wi-Fi transmitting andreceiving LEDs flickering as you are sending and receiving data from the Ultra96.Page 1310 OpenAMP Matrix Multiplication1. Select Example Projects up at the top of the page. You will see a list of projects alongwith descriptions of each.2. Select OpenAMP Matrix Multiplication which is the second in the list.Figure 8 – OpenAMP Matrix Multiplication3. Read through the description which goes over what is going to happen in the OpenAMPMatrix Multiplication Design and then select Run Project4. In the Output section you will see the two input matrices and then the matrix multiplicationresults.11 Additional Example Projects1. Return back to the Example Projects page by selecting the Example Project tab at thetop.2. As you can see there are seven additional example projects available to you. Feel freeto explore them. However some require additional hardware such as the Grove Starter Kit to complete.Page 1412 Custom Content Tutorial1. Now select the Tutorial tab at the top of the page. You will be directed to aTutorials/Guides pageFigure 9 – Ultra96 Tutorials/Guides2. This sections goes into how to get started with the out of box microSD card image wehave been exploring up to this point. As of now we have explored the Run Example Projects section.3. Let’s take a look at the Custom Content tutorial. Select Custom Content.4. This Tutorial goes over the three different ways custom content can be added to this outof box image. The three different ways being1) Uploading custom files2) Making custom webpages3) Making custom projects5. To access these options select the Custom Content tab at the top of the webpage.Page 1513 Smart Tutorial1. Now return back to the Ultra96 Tutorials page. This time select Smart from the tutoriallist2. This tutorial goes into explaining how to use the Smart Package Manager (smart) toupdate/install packages.3. This tutorial also provides an example that you can follow along with that will showcasea use case of how to write a simple “Hello World” application, compile it, create a RPMpackage with CMake, install/remove it with smart, and then run it.14 Using Ultra96 Tutorial1. Return back to the Tutorials page and now select the Using Ultra96 tutorial2. This tutorial goes over the various ways you can interact with the Ultra96. As of now wehave only done this using the Webapp.3. We will not be exploring accessing your Ultra96 over miniDP or UART since by defaultyou would need additional hardware to access it through these two peripherals.4. Read through the SSH section, it states we can access the Ultra96 terminal usingTeraTerm or a PuTTY terminal application.5. Since we have already downloaded and installed TeraTerm at the beginning of this guidelet’s access the Ultra96’s Linux terminal over SSH using TeraTermPage 1615 Access Ultra96 Linux Terminal over SSH1. Verify that your PC is still connected to the Ultra96 Websever by checking your wirelessnetwork.2. Open TeraTerm and then select File New connection… as seen in the image below.Figure 10 – TeraTerm New ConnectionPage 17Page 183. A new TeraTerm: New connection window will open. We now want to connect to Ultra96over SSH, select TCP/IP and then configure your Terminal settings the same as the below figure.Figure 11 – SSH Terminal Settings4. Select OK5. You will then be prompted to enter SSH Authentication information. In our case it islooking for the Linux terminal ’s user name and passphrase which are root and root .6. Please type in root for the User name and then type in root for the Passphrase as well.Then select OK .Figure 12 –SSH Authentication7. You now have access to the Ultra96 Terminal!Figure 13 – Ultra96 Terminal16 INA226 Current Sensor1. Now that we have access to the Linux Terminal let’s try and read from the INA226 CurrentSensor on our board.2. Type in your console i2cdetect –y –r 1Figure 14 – I2Cdetect3. As you can see some devices are coming back as unavailable under I2C detect, thismeans they may already be monitored by some other driver within the system. That is the case for the INA226 Current Sensor on Ultra964. It turns out there is a Linux sysfs drive for INAxxx devices that is already built into thekernel:Page 19https:///pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/hwmon/ina2xx5. Based on this it turns out that you can actually just read the system current from theINA226 device by using the sensor command.6. In your terminal type sensorsFigure 15 – Reading INA226 Device7. As you can see the current, voltage, and temperature measurements are reported back.8. This is one of the lesser known but highly useful Linux subsystems.17 Power Off1. When you are done experimenting with your Ultra96 and wish to power off the board,press and release the Power button (SW3) located on the top side of your Ultra96 next to the barrel jack.2. You will notice your board does not power down immediately. It will take roughly 10-20seconds for your board to completely power down. The reason behind this is it is adhering to the various power down sequencing requirements.3. Please note, if you do not let your Ultra96 power off as per the power down sequencingrequirements (such as unplugging the barrel jack), your SD Card may get corrupted or damaged.4. To power off the Ultra96 you can also press and hold Sw3 for 10 seconds to force apower off. This is useful for when the soft power-off appears to no work.Page 2018 Getting Help and Support18.1 Avnet SupportThe Ultra96 is a versatile development kit that allows evaluation of the Zynq MPSoC, which can help you adopt Zynq into your next design. All technical support is offered through website support forums. Ultra96 users are encouraged to participate in the forums and offer help to others when possible./forums/zed-english-forumTo access the most current collateral for Ultra96 please visit the community support page at: /content/support –Hardware/Vivado Support–Software SupportOnce on the support page:To access the latest Ultra96 documentation, click on the Documentation link:To access the latest reference designs for Ultra96, click on the following link:To access the Ultra96 technical forums, click on the following link:Page 21To view online training and videos, click on the following link:18.2 Xilinx SupportFor questions regarding products within the Product Entitlement Account, visit the Contact Support site for Xilinx:https:///support/service-portal/contact-support.htmlFor technical support including the installation and use of the product license file, contact Xilinx Online Technical Support at /support. The following assistance resources are also available on the website:∙Software, IP and documentation updates∙Access to technical support web tools∙Searchable answer database with over 4,000 solutions∙User forumsPage 2219 Installing and Licensing Xilinx Software19.1 Install Vivado Design Suite, Design EditionThe Zynq device on the Ultra96 is supported in Vivado Design Suite, Design Edition. Version 2018.1 or later is required to use the pre-installed board definition file.You must license your Vivado Design Suite, Design Edition with the license that came with your Ultra96. To obtain your free license, visit the following website and insert the voucher code from the certificate included in your kit:/getlicense1. Log in2. Fill out information at Product Licensing - Name and Address Verification, then clickNext3. Select your Account4. Enter your voucher code here, then click Redeem Now.Page 235. At the confirmation screen, click Yes.Figure 16 – Voucher Confirmation6. Under Certificate Based Licenses, find OEM Zynq ZU3 Ultra96 Vivado Design EditionVoucher pack and check the box. Now click Generate Node-Locked License.Figure 17 – Generate Node-LockedPage 247. Create or select your Host ID. Click Next.Figure 18 – Select Host InformationPage 258. Review the license request, then click Next again.If a full seat of Vivado System or Design Edition has already been installed, then no further software will be needed. Please check online for any updates at:/support/download/index.htmFor detailed instructions on installing and licensing the Xilinx tools, please refer to the latest version of Vivado Design Suite User Guide Release Notes, Installation, and Licensing (UG973).Page 2620 Certification DisclaimerBoth CE and FCC certifications are necessary for system level products in those countries governed by these regulatory bodies.Because Avnet boards are intended for evaluation kits only and destined for professionals (you) to be used solely at research and development facilities for such purposes, they are considered exempt from the EU product directives and normally are not tested for CE or FCC compliance.If you choose to use your board to transmit using an antenna, it is your responsibility to make sure that you are in compliance with all laws for the country, frequency, and power levels in which the device is used. Additionally, some countries regulate reception in certain frequency bands. Again, it is the responsibility of the user to maintain compliance with all local laws and regulations.This board should be used in a controlled lab environment by professional developers for prototype and development purposes only. The board included in the kit is not intended for production use unless additional end product testing and certification is performed.21 Safety WarningsThis product shall only be connected to an external power supply that is 96boards compliant.Only compatible plug-in modules shall be connected to Ultra96. The connection of incompatible devices may affect compliance or result in damage to the unit and void the warranty.This product shall be operated in a well-ventilated environment. If a case is used, it shall have adequate ventilation.22 RF CertificationThe frequency range is 2.4 to 2.4835GHz.The max power complies with 802.11b, which is 17dBm (typ).More information on RF certification for the TI WiLink8 module is available here:/index.php/WL18xxMOD_Regulatory_Product_Certification#Countri es_Accepting_FCC.2FIC.2FCE.2FMIC_ReportsPage 27。

Quick Start GuideSnapSAN ™ S3000/S50002U Storage ArrayStep 1It is essential that you activate your warranty. Technical and warranty support are not available until the warranty is active:1.Note the product serial numbers from the box labels or on the products.2.Go to / and select Service & Support > My Products .3.At the Site Login , enter your e-mail address and password , and click GO .4.Click Register New Product .5.Fill in the information (including array serial number) and click Submit .6.Register the Controller module: a.Click the Manage Products button.b.From the Product Selector drop-down list, select the unit in which the controller is installed.c.Click Add a Component .d.Enter the controller information .e.Click Save & Exit .7.If applicable, repeat Step 6for the secondary Controller module.Your warranty certificate will be emailed to you. Follow the instructions included in the email to complete the registration process.Step 2The SnapSAN S3000/S5000 arrays come with a rail kit for easy installation into a 19-inch (EIA-310) rack.NOTE:Two-post telco-style racks or racks less than 29 inches deep will not support this unit.Install Rail Kit1.Determine the 2U area where the SnapSAN is to be mounted, and mark the third and fourth holes on bothsides, front and back.EnterEnterSnapSAN 2UMark (Front View)2.Position the left rail between the left-side vertical rack rails with the rail kit flanges inside the rack and pointing outward.The slotted section is the front and the tray portion faces inward.3.Align the bottom of the rail rear with the lower 1U rail mark, and insert the twoinner rail projections into the marked holes.4.Align the bottom of the rail front with the lower 1U rail mark, and fit the hole projections into the rail holes.The top and bottom projections are for round-holed racks while the second and fifth are for square-holed racks.5.Secure the front using two M5 screws in the marked rail holes.6.At the rear , secure the rail:a.Verify the two projections are still in the marked holes.b.Insert the two M5 screws into the cable clamps and screw them loosely into the holes above and below the marks holes (with the projections).c.Align the cable clamps facing outward and tighten the screws.7.For the right rail , repeat Steps 2–6.Attach Bezel ClipsNOTE:If using the optional full front bezel, skip this step and install the optional bezel after the unit is in the rack using the instructions that come with the bezel.Before mounting the disk array in the rack, install the bezel clips for the front bezel:1.Slide the left connector (labeled “L”) onto the left flange on the array.2.Slide the right connector onto the right.Install the UnitWARNING:It is recommended that a mechanical lifter (or at least two people) be used to raise and align the unit to prevent injury during installation. Use care when insertingor removing a unit into or out of a rack to prevent the accidental tipping of the rack, causing damage or personal injury.AVERTISSEMENT:Afin d’éviter des blessures pendant l’installation, il est recommande d’utiliser un monte-charge (ou au moins deux personnes) pour élever ou aligner l’appareil. Faites attention lorsque vous insérez ou retirez l’appareil d’un support, pour empêcher le déversement accidentel de la crémaillère causant des dommages et des blessures.ing the mechanical lifter, position the SnapSAN array in front of the rack at the level of the rails.When properly positioned, the arrayshould have the power supplies at the top and the controllers at the bottom.Inner Rail Projections Align Rail at 2U BottomSquare-Holed Round-Holed Hole Projections:Round-Holed Cable ClampsInner RailSlotted RailLeft (L) Rail:Rear:FrontAlign Rail at 2U BottomRearFront:Rear:Power Supplies2.Place the rear of the array on the rail tray tabs .3.Slide the array into the rack until the ear tabs are flush against the front rails.4.Secure the unit by screwing four M5 screws into the front of the unit in the two holes located on both the left and right ear flanges.Step 3Disk DrivesNOTE:Do not remove the disk drives from their carriers. Doing so voids the drive warranty.Depending on the model, each array comes with up to 12 or 24 drive or blank carriers installed.IMPORTANT: To maintain proper airflow and cooling, a drive assembly or a blank drive carrier must be located in every slot. No empty slots are allowed.For the 24-slot array, four System Disks are installed in the four left-most slots. For the 12-slot array, four System Disks are installed in the four slots across the top.System Disk labels are attached to these drives. For the 3.5-inch drives, they are on the face; 2.5-inch drives, on the top.CAUTION: The first four slots must contain drives that function as System Disks for the disk array and contain key licenses and configuration data for the array. These System Disks must remain in these slots.Each unit using 3.5-inch drives comes with a set of location labels to identify the drive bay where the drive carrier resides. Attach a location label on the lower right corner of each drive face.System Disks24 2.5-inch Drives12 3.5-inch DrivesIf Used, Place Location Label Here on Each Drive*10400385­003*10400385-003You can get additional technical support on the Internet at the Overland Storage Support web page , or by contacting Overland Storage using the information found on the Contact Us page on our web site. OD11007-1003/2014 ©Overland Storage, Inc.Step 4Cable ConnectionsAll cabling, power connections, and cooling are located on the rear panel. The example below shows an array with dual SAS controllers.The following graphics show the connections for the Controllers:Secondary Power Module (1)Secondary Controller (1)PrimaryPower Module (0)PrimaryController (0)1 GB iSCSI 2-Port Controller124567310 GB iSCSI 2-Port Controller1246735FC Controller, 4-Port (SnapSAN S5000)*124673SAS 4-Port Controller1 - DC Button2 - USB Ports3 - Expansion Port4 - State LEDs5 - Host Ports6 - Management7 - Maintenance12456735FC 2-Port/1 GB iSCSI 2-Port Controller (SnapSAN S5000 Only)124 5 (FC)673 5 (iSCSI)* SnapSAN S3000 uses a 2-port version of this FC Controller.The following graphic shows the connections and LEDs for a Power Supply Module :Attaching Cables and Power CordsNOTE:For more details and options, refer to the SnapSAN S3000/S5000 User Guide.1.Connect the interface cable that came with the SnapSAN S3000/S5000 to the appropriate rear port (Port 0). Connect the other end to the Host/Application Server.2.If configuring a redundant-paths configuration, repeat Step 1 for CONT1. 3.If configuring for dual hosts (with dual HBAs), repeat Steps 1–2 using Port1.4.With the Power switches set to OFF, attach both power cords to the AC power sockets on the unit.a.Slide the power cord support clamp down toward the end of the support.b.Open the clamp, insert the power cord , and close the clamp.c.Slide the clamp back up the support to the start of the plug .5.Plug the power cords into a UPS appliance or a properly grounded AC power source.Turning the Power ONBe sure any SnapExpansion units are powered ON before turning on the disk array.Step 5Configure Network AccessConfigure your array using the embedded version of SnapSAN Manager:1.Connect the client machine to the Maintenance Port (7).2.With the client machine configured to 10.1.0.nn and a subnet of 255.0.0.0, open a web browser .3.Enter http://10.1.0.10 for Controller 0 (or http://10.1.0.11 for Controller 1).4.At the login screen, enter sysadmin for the user name and sys123 for the default password.5.Change the Management Port IP address:a.In the left Menu pane, clickConfiguration > Disk Array > Network > Management Port Settings .b.Enter the IP address , Subnet Mask , and Gateway for Controller 0 and, ifinstalled, Controller 1.c.ClickSet to save.The disk array can now be accessed through the Management Port (6).12567831 - AC Switch 2 - Power Plug 3 - Cable Clamp5 - Input LED6 - Fault LED7 - Service Alert LED8 - DC LED9 - Standby LED9Initializing the Disk Array1.In the left Menu pane, click Configuration > Initialization .2.Click Yes to suspend monitoring.3.When the wizard starts, choose either Normal Setting or Quick Setting .•Choose Normal Setting if you don't want to setup any RAID configuration.•Choose Quick Setting to quickly setup a RAID.4.Click Next .5.Enter a new name in the New Disk Array Subsystem Name box, and click Next .6.Choose one of the time setting options, and click Next .7.Click Finish to finish the initialization.Install SnapSAN ManagerUsing the enclosed CD, install SnapSAN Manager suite onto your management PC by running the Setup.exe file. Follow the wizard instructions. For more information, refer to the SnapSAN Manager User Guide .Step 6User GuidesFor detailed information on configuring your SnapSAN S3000/S5000, refer to the SnapSAN S3000/S5000 User Guide . For information on managing one or more SnapSAN arrays, refer to the SnapSAN Manager User Guide.Both guides are available online at:/snapsanQuick Start Guide translations are also available there.Warranty and Technical SupportWARNING: This device has more than one power cord. Disconnect ALL power supply cords before servicing.AVERTISSEMENT: Cet appareil a plus d’une cordon d’alimentation. Débranchez TOUTES les cordons d’alimentation avant l’entretien.For warranty and technical support information, see our Contact Us web page:/company/contact-us/index.aspx For information on contacting Overland Technical Support, see our Contact Support web page:/supportTo search for more service information, visit our Expert Knowledge Base System :/kb。

#雷尼绍本页空白。

目录法律信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4主界面. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5打开测试. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5查看旧版数据. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ANGST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5导入程序. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6还原 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 XK10激光校准仪分析. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6测试一览表界面 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7测试一览表. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8搜索 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8顺序 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8导出为CSV文件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8导出测试. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8导出传输文件/导入传输文件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8导出所有测试. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8删除 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9刷新结果. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9查看所选测试. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9标记 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10单位 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10应用 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10角度 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10报告 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11高级配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11帮助改进CARTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11通知 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11数据回看和分析 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12测试浏览器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12分析 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12曲线图选项. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13分析功能高亮显示. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13图形交互. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13比较 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15零点偏置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16应用“零点偏置”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16还原为原始设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16数据剪切选项. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16误差可视化（仅限XM测试） . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16偏置读数（仅限XM测试） . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16创建报告. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17复制和粘贴. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17创建PDF文件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17综合报告. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17误差补偿. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18配置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18保存配置设置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19加载配置设置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19在Explore中查看误差补偿文件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19保存误差补偿文件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19法律信息条款、条件和保修除非您和Renishaw达成并签署单独的书面协议，否则此等设备和/或软件应根据设备和/或软件随附的Renishaw标准条款和条件出售，或者您也可以向当地的Renishaw分支机构索取前述的Renishaw标准条款和条件。

.RAZER KRAKEN V3 XMASTER GUIDEWin the long game with the Razer Kraken V3 X—the ultra-light USB gaming headset made for gaming marathons. With an upgraded mic and drivers for greater sound, improved ear cushions for greater comfort, and Razer Chroma™ RGB for greater flair, your gaming is set to go the distance..CONTENTS1. WHAT’S INSIDE / WHAT’S NEEDED (3)2. LET’S GET YOU COVERED (5)3. TECHNICAL SPECIFICATIONS (6)4. GETTING STARTED (7)5. USING THE HEADSET (9)6. CONFIGURING YOUR RAZER KRAKEN V3 X VIA RAZER SYNAPSE (11)7. SAFETY AND MAINTENANCE (21)8. LEGALESE (22)1. WHAT’S INSIDE / WHAT’S NEEDEDWHAT’S INSIDE▪Razer Kraken V3 XA.Adjustable padded headbandB.Hybrid fabric and memory foam earcushionsC.Backlit Razer logo Powered by RazerChroma TM RGBD.Razer™ HyperClear cardioid micE.Mic mute buttonF.Volume control wheelB connector▪Important Product Information GuideWHAT’S NEEDEDPRODUCT REQUIREMENTS▪Windows® OS▪USB-A portRAZER SYNAPSE REQUIREMENTS▪Windows® 10 64-bit (or higher)▪Internet connection for software installation2. LET’S GET YOU COVEREDYou’ve got a great device in your hands, complete with a 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at Got a question? Ask the Razer Support Team at Your product’s serial number can be found here.3. TECHNICAL SPECIFICATIONSHEADPHONES▪Frequency response: 12 Hz – 28 kHz▪Impedance: 32 Ω @ 1 kHz▪Sensitivity (@1 kHz): 103dBSPL/mW,1KHz▪Drivers: Customized Dynamic 40mm Driver▪Inner ear cup diameter: 60 x 40mm▪Connection type: USB Type A▪Approx. weight: 285g / 0.63lbs▪Oval ear cushions: Full-ear coverage with fabric and plush leatherette, for sound isolation and comfortMICROPHONE▪Frequency response: 100 Hz – 10 kHz▪Signal-to-noise ratio: ≥ 60 dB▪Sensitivity (@1 kHz): -42 ± 3 dB▪Pick-up pattern: UnidirectionalON-EARCUP CONTROLS▪Volume up and down▪Mic mute on/off toggleAUDIO USAGE▪Wired audio usage: USB Type A▪Surround sound: Only available on Windows® 10 64-bit4. GETTING STARTEDSETTING IT UP1.Connect the headset to the USB port of your PC.2.On your PC, right-click on the sound icon on the system tray, and then select Open Soundsettings3.On the Sound window, set Razer Kraken V3 X as the default Output and Input device.e the Razer Synapse* app to customize your headset’s lighting for an immersive gamingexperience that’s truly yours.*Install Razer Synapse when prompted or download the installer from /synapse.ACTIVATE THE 7.1 SURROUND SOUND*Experience accurate positional sound that’s specifically designed for games, movies, and music.1.Download the 7.1 Surround Sound software from /7.1-surround-sound.2.Register your product at /products to get your activation code sent to youremail.*Only available on Windows® 10 64-bit5. USING THE HEADSETADJUSTING THE VOLUMERotate the volume control wheel as shown to increase or decrease the volume.USING THE MICROPHONEBend the mic until it is parallel to your mouth. Make sure the mic diaphragm is in front and the airvent is facing away from your mouth.Mic diaphragmAir ventUSING THE MIC MUTE BUTTONPress the mic mute button to mute or unmute the microphone.COMFORTWe recommend stretching the headset gently apart before placing them over your head to minimize headband stress. However, please avoid overstretching the headset beyond its technical limits.6. CONFIGURING YOUR RAZER KRAKEN V3 X VIA RAZER SYNAPSEInternet connection is required for installation, updates and cloud-based features.Registering for a Razer ID account is recommended, but optional. All listed features are subject to change based on the current software version, connected device(s), andsupported apps and software.SYNAPSE TABThe Synapse tab is your default tab when you first launch Razer Synapse. This tab allows you to navigate the Dashboard subtab.DashboardThe Dashboard subtab is an overview of your Razer Synapse where you can access all your Razer devices, modules, and online services.ModulesThe Modules subtab displays all installed and available modules for installation.Global ShortcutsBind operations or Razer Synapse functions to custom key-combinations from any Razer Synapse-enabled device inputs which apply across all device profiles. Learn more about ProfilesOnly Razer Synapse-enabled device inputs will be recognized.AUDIO TABThe Audio tab is the main tab for your Razer Kraken V3 X. From here, you can customize your device’s settings to unleash its full potential. Changes made under this tab are automatically saved to your system and cloud storage.SoundThe Sound subtab is for modifying your device’s sound properties.ProfileProfile is a data storage for keeping all your Razer peripheral’s settings. By default, the profile name is based on your system’s name. To add, rename, duplicate, or delete a profile, simply press the Miscellaneous button ( ).VolumeAdjust the audio volume of the device. You may also access the Windows Volume mixer of the current playback device where you can proportionally adjust the overall volume of the system or individually adjust the volume of each active application.Sound PropertiesLaunch the Windows sound properties window to manage the sound settings of your system such as modifying the playback and recording device settings, sound scheme and default communications activity.LightingThe Lighting subtab enables you to modify your Razer device’s light settings.BrightnessYou can turn off your Razer device’s lighting by toggling the Brightness option or increase/decrease the luminance using the slider.Switch Off LightingThis is a power saving tool which allows you to disable your device’s lighting in response to yours ystem’s display turning off and/or automatically power down when your Razer Kraken V3 X has been idle for a set amount of time.EffectsA number of effects can be selected and applied to your headset’s lighting, as listed here:If you have other supported Razer Chroma-enabled devices, you can synchronize their quick effects with your Razer device by clicking the Chroma Sync button ().Only devices that support the selected lighting effect will synchronize.Advanced EffectsThe Advanced Effects option allows you to choose a Chroma Effect you want to use on your Razer Chroma-enabled peripheral. To start making your own Chroma Effect, simply press the Chroma Studio button ().The Chroma Studio module is required to use this function.PROFILES TABThe Profiles tab is a convenient way of managing all your profiles and linking them to your games and applications.DevicesView which games are linked to each device’s profiles or which Chroma Effect is linked to specific games using the Devices subtab.You can import Profiles from your computer or from the cloud through the import button ( ) orcreate new profiles within the selected device using the add button ( ). To rename, duplicate, export, or delete a profile, simply press the Miscellaneous button ( ). Each profile can be set toautomatically activate when you run an application using the Linked Games option.Linked GamesThe Linked Games subtab gives you the flexibility to add games, view devices that are linked to games, or search for added games. You can also sort games based on alphabetical order, last played, or most played. Added games will still be listed here even if it is not linked to a Razer device.To link games to connected Razer devices or Chroma Effects, simply click on any game from the list, and then click Select a device and its profile to launch automatically during gameplay to select the Razer device or Chroma Effect it will link with. Once linked, you may click on the Miscellaneous button ( ) of the corresponding Chroma Effect or device to select a specific Chroma Effect or profile.SETTINGS WINDOWThe Settings window, accessible by clicking the ( ) button on Razer Synapse, enables you to configure the startup behavior and display language of Razer Synapse, view the master guides of each connected Razer device, or perform factory reset on any connected Razer device.General tabThe default tab of the Settings window. The General tab enables you to change the software’s display language, start-up behavior, display theme, and on-screen notifications display. You may also manually sync your profiles to the cloud ( ) or view the master guide of all connected Razer devices and installed modules.Reset tabThe Reset tab allows you to perform a factory reset on all connected Razer devices with on-board memory and/or reset Razer Synapse tutorials to acq uaint yourself again with Razer Synapse’s new features on its next launch.By resetting a Razer device, all profiles stored on the selected device’s on-board memory will beerased.About tabThe About tab displays brief software information, copyright statement and provides relevant links for its terms of use. You may also use this tab to check for software updates, or as a quick access to Razer’s social communities.7. SAFETY AND MAINTENANCESAFETY GUIDELINESIn order to achieve maximum safety while using your Razer Kraken V3 X, we suggest that you adopt the following guidelines:Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to for assistance.Do not take apart the device and do not attempt to operate it under abnormal current loads. Doing so will void your warranty.Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug the device in order to let the temperature stabilize to an optimal level.The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activities that requires active awareness of your surroundings.Listening to excessively loud volumes over extended periods of time can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.MAINTENANCE AND USEThe Razer Kraken V3 X requires minimum maintenance to keep it in optimum condition. Once a month we recommend you clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.8. LEGALESECOPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION©2021 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, and “For Gamers. By Gamers.” are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners.Windows and the Windows logo are trademarks or registered trademarks of the Microsoft group of companies.Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents, patent application s, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Kraken V3 X (the “Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.LIMITED PRODUCT WARRANTYFor the latest and current terms of the Limited Product Warranty, please visit /warranty.LIMITATION OF LIABILITYRazer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product.GENERALThese terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.。

Vocaloid3翻唱高级教程文：青龙圣者百度ID：死蝕之鸦——人生就是不断的学习目录第一章Vocaloid3及附带软件的安装1.1 V3主程序安装1.2安装说明第二章认识软件界面2.1工具栏2.2轨道窗口2.3钢琴卷帘窗2.4 参数控制框2.5 混音器窗口第三章高效使用软件软件基础设置3.1记住快捷键3.2设定里的选项可以用来修改快捷键第四章软件基础设置4.1偏好设定4.2默认歌唱风格设置4.3歌手管理器与歌手编辑器4.4量化设置第五章翻唱大作战战前准备~~~5.1 选择曲目和歌手5.2a下载素材，包括midi 原唱伴奏5.2b 下载音频文件小技巧5.2c 如果你在5.2a中无法找到自己想要的midi，那么就请看第九章，无midi翻唱法5.3 素材处理5.3a原唱和伴奏的格式转换5.3b伴奏测速5.3c midi人声轨的选择（*）第六章开始翻唱~~~6.1导入材料6.2音符设置（*）6.2a 音符标准化6.2b 音符变调6.3 写入曲速和拍子6.4 填词6.4a填词方法6.4b “-”的使用方法6.4c 拆音6.4d 非标准发音的方法6.4f 详解中文填词处理6.4e 四声调法与研究第七章十大参数7.1参数主要工具7.2 DYN 电平7.3 VEL 速度7.4 OPE 鼻音7.5a PIT弯音7.5b PBS弯音敏感7.5c POR弯音时间7.6 BRI洪亮度7.7 BRE呼吸度7.8 CLE清晰度7.9 GEN 性别度7.* br呼吸音第八章插件使用8.1 插件介绍8.2使用方法8.3部分插件说明第九章后期处理9.1前言9.2宿主9.3软件9.4硬件第十章无midi非耳扒翻唱法10.1 素材转换10.2 原唱和伴奏的对轨10.3 歌声提取10.4 转换VSQ10.5 参数的细节处理后记注：带*号过程为第十章可省略步骤。

第一章Vocaloid3及附带软件的安装※资源均来自网络，仅限使用在以学习与技术交流为目地非营利行为※※严禁使用本资源参与任何盈利（包含有偿赠与）、商业行为※※现在只要拥有双币信用卡或PayPal 即可在雅马哈官网够买到正版※》》》大陆VOCALOID官方零售网站已支持支付宝付款《《《1.1 V3主程序安装目前网络上的破解的vocaloid3 有两种，一种是V ocaloid3 AE 也就是V3协会汉化版，另一种是V ocaloid3 FE，外国人破解然后国人汉化的，综合资源方面考虑，给大家提供V3 AE，因为此版本绑定了很多相关插件，适合新手使用。

目录目录 (1)1、A区工具栏 (2)（File Properties）文件属性 (2)（Print Preview）打印预览 (3)（Print）打印 (3)（Markup）圈阅 (3)（MockUp）导入蒙版文件 (4)（Select）选择 (4)（Zoom in）放大 (4)（Zoom out）缩小 (4)（Zoom to fit） (4)（Zoom Box Mode） (4)（Dynamic Zooming）动态显示 (4)（Spin Mode）自动旋转模式 (4)（Rotate Mode）手动旋转模式 (4)（Pan）手动 (5)（Layers）层过滤器 (5)（PMI Filtering）属性过滤器 (5)（Render Mode）显示模式 (6)（Light Manipulation Dialog）光亮度调节器 (6)（Show/Hide Tree Model）显示/隐藏模型导航树 (7)（Manipulators）鼠标移动控制器 (7)（Part Alignment）零件之间的约束 (8)（Transform Model）移动模式 (8)（Interference Checking）干涉检查 (9)（Bill of Material）明细表 (9)（Entity Properties）实体属性 (10)（Manage User Coordinate Systems）用户自定义坐标系 (10)2、B区工具栏 (11)（Distance）测量元素长度 (11)（Arc）测量弧度 (11)（Angle）测量角度 (12)（V ertex Coordinates）空间点坐标 (12)（Minimum Distance）最短长度 (13)（Edge Length）测量边长 (13)（Face Surface）测量表面积 (14)（Sectioning）设置剖切 (14)3、C区模型导航树 (15)4、D区图纸显示窗口 (17)三维图纸浏览器操作手册在CPC 系统中，点击浏览图纸后，弹出的浏览器界面如下图所示：ABCD1、A 区工具栏具体功能如下：（File Properties ）文件属性点击该按钮，系统弹出该图文件的详细属性，包括文件属性及资源信息。