注射装置INJECTION UNIT A B C 螺杆直径Screw Diameter mm 34 36 40 螺杆长径比Screw L/D Ratio L/D 21.2 20 18 理论容量Shot Size(Theoretical) cm3131 147 181 注射重量Injection Weight(PS) g 119 134 165 注射压力Injection Pressure Mpa 206 183 149 螺杆转速Screw Speed rpm 0～205
合模装置CLAMPING UNIT
合模力Clamp Tonnage KN 860
移模行程Toggle Stroke mm 310
拉杆内距Space Between Tie Bars mm 360x360
最大模厚Max.Mold Height mm 360
最小模厚Min.Mold Height mm 150
顶出行程Ejector Stroke mm 100
顶出力Ejector Tonnage KN 33
顶出杆根数Ejector Number Piece 5 其它OTHERS
最大油泵压力Max.Pump Pressure MPa 17.5
油泵马达Pump Motor Power kw 7.5
电热功率Heater Power kw 6.2
外形尺寸Machine Dimension(LxWxH) m 4.5x1.25x1.9 重量Machine Weight t 3.45
料斗容积Hopper Capacity kg 25
油箱容积Oil Tank Capacity L 230
海天注塑机参数
HTF86/TJ
HTF120J/TJ
HTF160J/TJ
HTF200J/TJ
HTF250J/TJ
HTF300J/TJ
HTF360J/TJ
HTF450J/TJ
HTF530J/TJ
HTF650J/TJ
HTF780J/TJ
HTF900J/TJ
HTF1000J/TJ
