下载文档原格式
VLDPE 定义：极低密度PE(VLDPE)是具有低于0.915g／cc。
密度的线性乙烯共聚物。
商业供应的VLDPE 产品普通范围是0 ．880~0 ．910g／C ．C ，并包括超低密度聚乙烯。
VLDPE 具有的柔软度在以前只能由普通的低强度材料提供，例如乙烯一醋酸乙烯共聚物 (EVA)、乙烯一丙烯酸乙酯共聚物(EEA)和增塑PVC；VLDPE 具有与LLDPE 一样的韧性和宽的加工温度范围。
此外，VLDPE 表现出的封合性和柔软性，可与4％一18％的EVA 共聚物相比，同时还保持了LLDPE 的物理特性。
化学和性能VLDPE 树脂是由乙烯和其它a．烯烃，如丁烯、乙烯和辛烯共聚而成的，采用气相或者液相加工工艺均可。
密度。
份子量和份子量分布的不同由选择共聚单体含量、催化剂和聚合条件而定。
另外，共聚单体的选择对聚合物的物理特性有显著的影响。
VLDPE 产品的较低结晶度导致其成为柔软的聚合物，其模量可与含4％至18％的醋酸乙烯( VA)的共聚物相匹比，VLDPE 具有能量吸收特性，这可转化为具有突出的抗冲击性、抗穿透性和抗撕裂性。
因为熔点高，VLDPES 此外还具有比EVA 和其它极性乙烯共聚物更好的抗热变形性。
此外，线性乙烯共聚物的软化点随着密度减小而降低，由此VLDPE 的封合范围与LLDPE 相比有所加大。
另外，VLDPE 具有优良的热粘着强度和可密封性，即使受污染也如此。
VLDPE 的天然非极性是造成它们的抗化学性和热稳定性比极性聚合物好的原因。
VLDPE 与PE 和PP 的粘合力极佳，但是，这种材料的非极性造成与极性基材粘着力低于那些普通可达到与极性基村粘附的材料，例如醋酸乙烯共聚物。
VLDPE 的其它固有优点是优良的抗环境应力开裂性(ESCR)、极佳的抗崛挠寿命和抗屈挠龟裂性，及冷冲击性能。
加工VLDPE 的流变性能与线性PE 共聚物相似。
由此，VLDPE 通常可在现有PE 设备上加工，特殊是已设计用于加工LLDPE 的设备。
比重(g/cm³) CONTINUUM™ DGDA-2420 NT MDPE0.941 (ASTM D792)CONTINUUM™ DGDA-2420 YL MDPE 0.940 (ASTM D1505);0.944 (ASTM D1505)CONTINUUM™ DGDA-2490 BK HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDA-2490 NT HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDA-2492 BK HDPE 0.959 (ASTM D1505);0.949 (ASTM D1505)CONTINUUM™ DGDA-2492 NT HDPE 0.949 (ASTM D1505);0.959 (ASTM D1505)CONTINUUM™ DGDB-2490 BK HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDB-2490 NT HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDC-2480 BK HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDC-2480 NT HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDC-2482 NT HDPE 0.949 (ASTM D792);0.959 (ASTM D792)CONTINUUM™ DGDD-2480 BK HDPE 0.959 (ASTM D792);0.949 (ASTM D792)CONTINUUM™ DGDD-2480 NT HDPE 0.949 (ASTM D1505);0.959 (ASTM D1505)CONTINUUM™ DMDA-1250 NT 7HDPE0.955 (ASTM D792)操作产品定属记号CONTINUUM™ 双峰聚乙烯树脂具有聚乙烯管材的所有基本要素如果您正在为您的管材应用寻找满足或超越 ASTM PE4710 标准的高密度聚乙烯树脂制成的管材级材料、或者是寻满足或超越 ASTM PE2708 标准的中密度聚乙烯树脂，抑或是寻找PE 100 树脂管材级材料，那么，陶氏化学 (The Dow Chemical Company) 所提供的业界领先的管材级树脂产品则是您的理想之选。
罗门哈斯树脂型号分类● 软化：AMBERLITE IR120Na● 脱碱：AMBERLITE IRC86 AMBERLITE IRA67● 除盐：AMBERJET 1200Na AMBERJET 4200Cl AMBERLITE IR120NaAMBERLITE 252H AMBERLITE IRA400 AMBERLITE IRA402ClAMBERLITE IRA900Cl AMBERLITE IRA410Cl AMBERLITE IRA458AMBERLITE IRA958Cl AMBERLITE IRC86 AMBERLITE IRA96RF● 混床：AMBERJET 1200Na AMBERJET 4200Cl● 凝结水精处理：AMBERJET 4400Cl AMBERJET 1600 AMBERJET 9000OHAMBERSEP 900P AMBERJET 1500 AMBERSEP 252● 超纯水及特殊水处理：AMBERJET UP6040 AMBERLITE IRN160 AMBERLITE MB9LAMBERJET UP6150食品医药领域● 食品：AMBERLITE IRA96C RF AMBERJET 1000NaAMBERLITE CR1320 Ca AMBERLITE FPC11 Na● 医药：AMBERLITE IRA67 AMBERLITE XAD 4 AMBERLITE XAD 16AMBERLITE XAD 7HP AMBERLITE XAD1600 AMBERLITE XAD1180● 饮用水：IMAC HP1110Na IMAC HP333 IMAC HP555 IMAC HP661工业过程领域● 催化：AMBERLYST 15 WET AMBERLYST 35 WET AMBERLYST A21大孔吸附树脂AMBERLITE TM XAD TM系列树脂在果汁除杂及去异味方面具有特殊的功能，使其显著提高果汁的品质并改AMBERLITE TM FPA系列树脂大多具有较高的交换容量，高强度和卓越的抗有机物污染性能，使其能显著降低再生剂用量及再生液的排放量，其特殊结构在制糖行业的应用中能减少糖液的异构化现象，降低母液新型的AMBERLITE TM Cr色谱分离树脂是专门为糖和氨基酸的回收、分离及提纯而开发的。
熔融指用途牌号Grade 产地或厂商密度Density3g/cm数MFIIntendedApplicag/1 tions0min缠绕膜制造用的牌号（掺入30%）强度高于LDPE不含爽滑和开口掺2045G和5100G 增加强度掺AFFINITY-OG增加韧性LLDPE农膜复合膜衣缠绕膜LLDPE 218NF 福建联合0.918 2物包装袋内衬缠绕膜及消费品包装农膜复合膜衣缠绕膜LLDPE DFDA 7042 福建联合0.918 1.8物包装袋内衬缠绕膜及消费品包装管膜吹塑可用缠绕膜LLDPE DFDA-7042N 兰州石化0.920 2于流延加工成型挤出小管材板材农用膜工业用包装膜机械零缠绕膜LLDPE DFDA-7042N 扬子石化0.920 2件日用品建筑材料电线电缆绝缘涂层和合成纸缠绕膜缠绕膜LLDPE FS250A日本住友新加坡聚烯烃0.921 2农膜透明度冲击强度加工性缠绕膜LLDPE 0218F努发克novachemicals0.920 2中等承重吹塑膜，与其缠绕膜LLDPE 218N 沙特SABIC 0.918 2他树脂混合柔韧延伸性好易压制拉伸膜工业袋缠绕膜LLDPE 7420A 泰国PTT 0.918 1垃圾袋高强度光泽度和良好的韧性包装袋洗衣袋收缩膜（10-30%LLDP）E蒸煮袋刚度减缠绕膜LLDPE（6c）LL3910AA 英力士INEOS 0.936 1厚能力光学特性耐高温水蒸气阻隔性能伸缩性耐热收缩力抗烧穿力外包装薄膜级LLDPE LL6910AA 英力士INEOS 0.936 1收缩膜（精益至30%LLDP E）非常高刚度光学特性好耐高温高水蒸汽阻隔性能高抗蠕变性密封性好拉伸缠薄膜级LLDPE LL1002YB 埃克森美孚0.918 2绕膜流涎膜产品袋薄膜多层薄膜刚性抗穿性抗缠绕膜L LDPE（6c）PF6430AA 英力士INEOS 0.926 3.2氧化性外观好乙烯共聚单体共挤出成型薄膜拉伸缠绕低密度乙烯共聚单体缠绕膜L LDPE（6c）PF6930AA 英力士INEOS 0.936 3.5刚性抗穿孔性表面光洁度抗氧化性吹塑薄膜机用缠缠绕膜LLDPE(8C线性）2047G 美国陶氏0.917 2.3绕膜预拉伸膜（拉伸性极好）茂金属收缩、重茂金属2005CH 埃克森美孚0.920 0.5 包、复合、大棚膜收缩、重茂金属2705CH 埃克森美孚0.927 0.5包、复合膜高透明、冷冻、收缩、重茂金属1018FA 埃克森美孚0.918 1包、复合、FFS膜、大棚膜（中国地区没有）高透明、收茂金属1018EA 埃克森美孚0.918 1缩、重包、复合、FFS膜、大棚膜茂金属1018CB 埃克森美孚0.918 1高透明、收缩、重茂金属1018CA 埃克森美孚0.918 1 包、复合、FFS 膜、大棚膜茂金属2018CB 埃克森美孚0.920 1 拉伸、流延膜高透明、收缩、重缠绕膜茂金属2018CA 埃克森美孚0.918 2包、复合、FFS膜、大棚膜缠绕膜茂金属2018EB 埃克森美孚0.918 收缩膜缠绕茂金属3518CB 埃克森美孚0.918 3.5 拉伸、流延膜拉性抗刺穿性机用缠绕膜添加食品包装薄膜应用缠绕膜茂金属（6c）PF6212AA 英力士INEOS 0.920 1.2机械和光学性能极高的冲击强度低温密封特性缠绕膜茂金属2045G 美国陶氏0.920 1POF收缩膜大棚膜机用缠绕膜添加农膜缠绕膜茂金属SP1520 三井化学0.913 2水冷吹塑薄膜机械特性热封特+ 韧性强度茂金属SP0540 三井化学0.903 3.8缠绕膜茂金属FV203 日本住友茂金属5100G 美国陶氏0.920 0.8 5茂金属5220 美国陶氏0.915 3.5茂金属5400G 美国陶氏0.918 1 复合膜茂金属5401G 美国陶氏0.918 1 复合膜复合膜茂金属5500G 美国陶氏0.914 1.5 低温热封性（85 度）茂金属7910A 泰国PTT 1 茂金属488 2膜一次性手套容器管材车保险杆拉超低密度聚乙烯1095NT 美国陶氏0.886 1.3伸性柔软度抗撕裂应力开裂性低温抗冲击性增粘效超低密度聚乙烯ATTANE 4203 美国陶氏0.905 0.8果保鲜膜保鲜膜超低密度聚乙烯ATTANE 4404 美国陶氏0.904 4透明度极好POE弹性体DF840 三井化学0.885 3.6PE弹性体POE-8999 副Engage美国陶氏0.862~0.881.0~35PE弹性体POP-475 副AFFINITY美国陶氏0.88~0.91.0~35吹膜低POP-1881AFFINITY美国陶氏0.903 1温热封性能优越复合膜POP-1450AFFINITY美国陶氏0.902 7.5 挤复PE弹性体6001（副VERSIFY）美国陶氏 5热塑性弹性体POE-LC170 韩国LG 0.870 1聚合物填料混入性好降低产品密度热塑性弹性体聚合物改性提POE-LC670 韩国LG 0.870 5 高PP 冲击强度填料混入性好降低产品密度PP弹性体VERSIFY 美国陶氏0.862~0.91.0~35弹性体VISTMAXX 埃克森美孚0.862~0.9 1.0 ~35弹性体VISTMAXX 6102 埃克森美孚0.862 1.3食品包装韧性4201G ATTANE 美国陶氏0.912 1热封性光学性加工性食品包4203 ATTANE 美国陶氏0.905 0.8 装强度抗穿刺柔软性薄膜级LLDPE薄膜级LLDPE Q1018H卡塔尔Qatofin0.918 1薄膜级LLDPE Q1018N卡塔尔Qatofin0.918 1薄膜级LLDPE Q2018H卡塔尔Qatofin0.918 2 复合膜薄膜LLDPE Q2018N 卡塔尔0.918 2 吹膜级Qatofin薄膜级LLDPE Q2018C卡塔尔Qatofin0.918 2 流延膜农膜、拉伸膜、垃圾袋收薄膜级LLDPE 1001XV 埃克森美孚0.918 1缩膜、产品袋（混纺10-20%LDPE）收缩膜蔬果包装袋农膜拉伸膜具有薄膜级LLDPE 1001KW 埃克森美孚0.918 1优异的延伸性和抗刺穿性并有高光泽度和透明度薄膜生薄膜级LLDPE 1002KW埃克森美孚新加坡聚烯烃0.918 2产袋垃圾袋高光泽度拉伸缠薄膜级LLDPE 1002YB 埃克森美孚0.918 2绕膜流涎膜产品袋中等承重吹塑膜，与其薄膜级LLDPE 218N 沙特SABIC 0.918 2他树脂混合柔韧延伸性好易压制通用薄薄膜级LLDPE 218W 沙特SABIC 0.918 2性吹塑膜高光滑度高延伸性好易压制薄膜农膜及佳薄膜级LLDPE 253S日本住友新加坡聚烯烃0.924 2的透明度冲击强度和加工性缠绕膜薄膜级LLDPE FS250A日本住友新加坡聚烯烃0.921 2农膜透明度冲击强度加工性工业袋垃圾袋薄膜级LLDPE 7420D 泰国PTT 0.918 2高拉伸强度光泽度韧性好拉伸膜工业袋薄膜级LLDPE 7420A 泰国PTT 0.918 2垃圾袋高强度光泽度和良好的韧性薄膜级LLDPE BDL 92020C 墨西哥Pemex 0.921 2薄膜级LLDPE BDL 92020S 墨西哥Pemex 0.918 2工业衬板工业薄膜级LLDPE L42022E2 美国台塑0.919 2.2包装服装袋刚性和强度好共混树脂工业薄膜级LLDPE L42022B 美国台塑0.920 2.2衬板工业包装服装袋刚性和掺混重负荷袋薄膜级LLDPE LL0209AA 上海赛科0.920 1农膜内衬袋吹塑缠绕膜流涎膜薄膜级LLDPE LL0220AA 上海赛科0.920 2（缠绕膜，多层膜，掺混）吹塑膜（内衬薄膜级LLDPE LL0220KJ 上海赛科0.921 2.4袋，袋，小拱棚膜，掺混）农膜复合膜衣缠绕膜LLDPE 218NF 福建联合0.918 2物包装袋内衬缠绕膜及消费品包装机用缠绕膜添加食品包装薄膜应用缠绕膜LLDPE PF6212AA 英力士INEOS 0.920 1.2机械和光学性能极高的冲击强度低温密封特性薄膜多层薄膜缠绕膜LLDPE PF6430AA 英力士INEOS 0.926 3.2刚性抗穿性抗氧化性外观好乙烯共聚单体共挤出成型薄膜拉伸缠绕低密度乙烯共聚单体缠绕膜LLDPE PF6930AA 英力士INEOS 0.936 3.5刚性抗穿孔性表面光洁度抗氧化性吹塑薄膜包装用，农膜，拉薄膜级LLDPE 3224韩国韩洋化学公司0.920 2伸包装膜加工性热封合性各类购物袋、轻中包装膜、超薄膜、伸缩膜热封薄膜级LLDPE 3224台湾塑胶工业有限公司0.920 2性佳、薄膜延伸性佳、押出性佳、3224 开口中等、3224D开口佳薄膜级LLDPE 3305 韩国韩华0.910 2机械性加工性薄膜级LLDPE 7120B雪佛龙菲利普斯薄膜级LLDPE DFDA-2001 广州石化0.920 2薄膜开口性极好薄膜LLDPE 7042N 兰州石化0.924 2级薄膜级LLDPE DFDA-7042中国石油大庆石化0.918 2农膜、包装膜薄膜级LLDPE DFDA-7042 齐鲁石化0.917-0.9231.5-2.5农用膜工业用包装膜机械零薄膜级LLDPE DFDA-7042 扬子石化0.920 2件日用品建筑材料电线电缆绝缘涂层和合成纸地膜包装袋食薄膜级LLDPE DFDA-7042 吉林石化0.920 2品包装袋容器衬里涂层管膜吹塑可用薄膜级LLDPE DFDA-7042 兰州石化0.920 2于流延加工成型挤出小管材板材农膜、地膜、日用包装袋，垃圾袋，A2±各种注薄膜级LLDPE DFDC-7050中原石油化工有限责任公司A0.92 ±0.2B0.92 ±0.3C0.92 ±0.40.2B2±0.3C2±塑和农用小口径排水管材开0.4口性易揭开熔体黏度高弹性性好薄膜抗刺性强薄膜级LLDPE DFDC-7050科威特EQUATE0.918 2复合膜双峰料哑光膜高强度薄膜级LLDPE FB2230 北欧化工0.9230.2-22工业包装重包装袋压缩包装深冻包装农用包装薄膜级LLDPE FD21HN沙特QAMAR公司0.918 2吹膜标准透明度薄膜级LLDPE FD21HS沙特QAMAR公司0.918 2吹膜高透明度农用覆盖薄膜薄膜级LLDPE FU149M 韩国SK 0.919 1通用薄膜韧性高高抗张强度普通薄膜加工薄膜级LLDPE FV149M 韩国SK 0.919 2性滑爽性光泽性高透明度自动包薄膜级LLDPE LF-218/21巴西化学公司BRASKEM0.921 2装通用包装加工性好胶合麻袋通用薄膜级LLDPE LL-218/21巴西化学公司BRASKEM0.918 2包装防粘连防滑密度低薄膜级LLDPE LL0209AA 伊朗石化0.920 0.9薄膜级LLDPE LL1007X95 埃克森美孚外包装收缩膜（精益混纺，10至30%LLDPE）非常薄膜级LLDPE LL6910AA 英力士INEOS 0.936 1高刚度光学特性好耐高温高水蒸汽阻隔性能高抗蠕变性密封性好薄膜级LLDPE PF-0218D努发克novachemicals0.918 2适合垃圾袋用制品一般工薄膜级LLDPE UF414韩国现代石油化学公司0.920 2业用农用膜、农用窄幅膜薄膜级LLDPE YLF-1801 扬子石油化工0.918 1重包装膜薄膜级LLDPE YLF-1802 扬子石油化工0.918 2微滴管、彩印膜薄膜级LLDPE 1820S1 印尼薄膜级LLDPE 201XV 福建联合薄膜级LLDPE 7087科威特EQUATE1薄膜级LLDPE 新加坡注塑LLDPE级注塑级LLDPE 7635 韩国韩华0.924 20家庭用品玩具色母家注塑级LLDPE BDL 92200 墨西哥Pemex 0.920 20用器皿二次膜瓶盖砧板器皿易拉罐玩注塑级LLDPE DNDA 7144 茂名石化0.924 20具网篮塑料花可用于涂覆、管材注塑级LLDPE JL210 韩国SK 0.924 20色母盖子砧板注塑级LLDPELL6101RQ粉料埃克森美孚0.924 20共混改性应用粉料色母瓶注塑级LLDPELL6101XR 粒料埃克森美孚0.924 20盖容器门垫垃圾桶盖子粒料注塑级LLDPE LL6201XR 埃克森美孚0.926 50器皿瓶注塑级LLDPE M200024 沙特sabic 0.924 20盖工业容器垃圾箱汽车零件注塑级LLDPE M500026 沙特sabic 0.926 50容器瓶盖深腔注塑件高压花料薄壁模挤出塑件, 色涂覆LDPE MG70 卡塔尔石化0.918 70 母料, 柔级性家用品级层、家庭用品、造花与人工草坪LDPE M050X 0.919 50汽车地注塑级LDPE XJ710 韩国湖南0.924 24毯涂层容器盖子玩具LDPE XJ710RA注塑级LDPE LDPE 68 三井化学0.916 23LDPE LDPE SA200-22LDPE LI2200LDPE M050X高压涂覆挤出级LDPE LA0710 法国道达尔0.918 7.5涂层纸纸板涂覆纸张、纸板、玻璃纸、尼涂覆级LDPE 19N430 英力士INEOS 0.920 7.5龙、聚酯作乳制品和果汁及化学药品等包装涂覆级LDPE LB7000 韩国LG 0.917 7纸，纸板，软包装涂覆级LDPE LDPE L420 新加坡聚烯烃0.918 3.5涂膜挤出涂料注塑级LDPE LDPE 7008 美国陶氏0.916 7.5中等重量轻涂层和薄挤出级LDPE EC-474AA 美国西湖0.918 8片底涂料提供热密封性热熔层压胶粘剂一般用途的涂料挤出级LDPE LDPE 5004I 美国陶氏0.924 4.2挤出级LDPE LDPE D777C 泰国暹罗0.918 7LDPE LDPE NA 7-25高压薄膜LDPE LDPE F2-12LDPE LDPE F2-21TLDPE NA345-196LDPE PD0270高压重包装注塑级LDPE LDPE 150E 杜邦LDPE LDPE G03-21TLDPE LDPE 132GLDPE LDPE 132G薄膜级LDPE薄膜级LDPE 18D中国石油大庆石化0.920 2吹塑、农膜、地膜薄膜级LDPE 10803-020全俄联合萨拉瓦特SALAVAT0.920 2农用大棚膜用于发泡相当薄膜级LDPE 15803-020全俄联合萨拉瓦特SALAVAT0.920 2于燕山高压1F7B，水果发泡网农地膜薄膜级LDPE 1F7B 北京燕山石化0.920 7 农地膜通用薄薄膜级LDPE 2102TX00 伊朗石化0.921 1.9膜袋子层压膜高输出薄膜级LDPE 2102TN00 齐鲁石化0.9201.8-3.2轻包装膜、发泡片材、电线电缆薄膜LDPE 2102TN26 齐鲁石化0.920 2 膜料，使级用于制作轻包装膜、农地膜薄膜收薄膜级LDPE 1925AS 沙特Tasnee 0.925 1.9缩膜袋光学特性加工性薄膜级LDPE 2420H 兰州石化0.9200.6-1.收缩薄膜层压膜医药薄膜级LDPE 2420F 扬子巴斯夫0.922-0.9250.6-0.9包装农膜表面保护膜购物袋深冷包装膜收缩薄薄膜级LDPE 2420H 扬子巴斯夫0.922-0.9261.7-2.2膜，层压膜，购物袋，深冷包装膜收缩薄薄膜级LDPE 2420K 扬子巴斯夫0.922-0.9263.4-4.6膜，层压膜，购物袋，深冷包装膜薄膜级LDPE 2426F中国石油大庆石化0.923 0.8收缩膜、吹塑膜薄膜级LDPE 2426H中国石油大庆石化0.923 2农用薄膜薄膜级LDPE 2426K中国石油大庆石化0.923 4包装膜、高透明薄膜收缩薄薄膜级LDPE 2426F 扬子巴斯夫0.9220.6-0.9膜，层压膜，医药包装，农膜，购物袋，深冷收缩薄膜, 层村薄膜级LDPE 2426H 扬子巴斯夫0.922 2包装, 购物袋, 深冷包装膜薄膜级LDPE 2426K 扬子巴斯夫0.923 4收缩薄膜，层压膜薄膜级LDPE 2426F 兰州石化0.922薄膜级LDPE 2426H 兰州石化0.922薄膜级LDPE 2426K 兰州石化薄膜级LDPE 2426H 中海壳牌含开口剂和爽薄膜级LDPE 2426H 茂名石化滑剂开口性好透明度高薄透明膜、发泡薄膜级LDPE FD0274 卡塔尔石化0.923 2.4产品复合膜高强度高净度高透明薄膜级LDPE FD0474 卡塔尔石化0.923 4度包装膜展示膜洗涤膜适合高薄膜级LDPE 5355雪佛龙菲利普斯2速度转换加工性、密封性好薄膜级LDPE F200GG 马来西亚大藤 2成衣袋,包装袋,低强度蔬果薄膜薄膜级LDPE F210 新加坡聚烯烃0.922 2重包装薄膜、收薄膜级LDPE FB 0300 韩国LG 0.921 0.3缩薄膜、覆盖薄膜、各类工业包装工业用收缩膜,农用膜,薄膜级LDPE FB 3003 卡塔尔石化0.920 0.3重包装袋, 建筑用膜机械性好收缩性好重包装薄膜级LDPE LD 165BW1 埃克森美孚0.9220.33薄膜收缩薄膜建筑用膜薄膜级LDPE LD605 北京燕山石化0.9234.5～7.5超薄膜薄膜，内衬袋，农业膜，拉链袋，气薄膜级LDPE N125Y马来西亚PETLIN公司0.921 2.5泡膜，发泡膜，发泡片材（珍珠棉），交联发泡农膜望薄膜级LDPE N150中石化上海石油化工0.918 1.5江纸塑用来吹复合膜级油化工薄膜级LDPE N220中石化上海石油化工0.920 2.2 农膜轻膜化学稳定性好耐酸、碱、薄膜级LDPE Q200中石化上海石油化工0.922 2盐及水溶液腐蚀有一定机械性、抗水和透气性薄膜级LDPE Q210中石化上海石油化工0.921 2化学稳定性好耐酸、碱、盐及薄膜级LDPE Q281中石化上海石油化工0.925 2.8水溶液腐蚀有一定机械性、抗水和透气性薄壁模塑件色薄膜级LDPE MG70 卡塔尔石化0.918 70母料柔性家用品流动性优异注塑级LDPE注塑级LDPE 1I2A-1 燕山石化0.919 2管材板材注塑级LDPE 1I50A 燕山石化0.916 5人造花盆景注塑级LDPE 2410T 茂名石化0.925 34注塑制品盖子注塑级LDPE 2420H 扬子巴斯夫0.922-0.9261.7-2.收缩薄膜层压2 膜购物袋深冷包装膜注塑级LDPE 2420H 中海壳牌0.924 1.9注塑日用包装注塑级LDPE 868-000 茂名石化0.92049.3塑料花也可作涂覆料粉末涂注塑级LDPE MB9500 韩国LG 0.916 50层家庭用品造花人工草坪薄壁模塑件色注塑级LDPE MG70 卡塔尔石化0.918 70母料柔性家用品流动性优异涂覆级LDPE涂覆产品复合涂覆级LDPE LA-0710 卡塔尔石化0.918 7结构粘连优异流动性好涂覆基材纸板铝包装食品液体粉末医疗机涂覆级LDPE 19N430 英力士INEOS 0.920 7.5械化工产品加工性高涂覆速度低缩幅下拉能力好稳定织物边缘稳定挤出时低烟雾手感好可以良好的粘附在多种基板热封性能好纯度高凝胶水平非常低涂覆级LDPE 1C7A 燕山石化0.918 7涂覆编织袋牛皮纸纸纸板涂覆级LDPE LB7000 LG化学0.917 7软包装粘结强度好基材涂膜垂伸涂覆级LDPE LDC-801YY 马来西亚大藤0.920 23性能佳热性合性及粘合性好涂料食品液体涂覆级LDPE WNC199澳大利亚Qenos0.918 8包装附着力好热密封性好低气味涂层纸纸板铝涂敷应用纸张涂覆级LDPE LA0710 法国道达尔0.918 7.5涂料剥离性内缩量低食品接触的合规性涂覆LDPE 7008 美国陶氏级薄膜级HDPE薄膜购薄膜级HDPE HD5301AA 上海赛科0.9500.08物袋手提袋杂物袋薄膜级HDPE 4000F 扬子石化购物袋薄膜级HDPE 50GF003 印度石化0.950计数器袋载波袋薄膜购薄膜级HDPE 7000F 韩国湖南0.9560.04物袋农膜抗撕裂强度高薄膜机械强度和刚性薄膜级HDPE 7000F三井石油化学有限公司0.9560.05优良高速条件下的加工性能尤为优异薄膜中薄膜级HDPE 7000F 扬子石化0.948-0.9540.15-0.3空容器管道单丝延伸带电绝缘制品水管瓦斯管排薄膜级HDPE 8001 台湾塑胶0.9480.05污水管化学用管电视套管地面加薄膜级HDPE 8001 韩国湖南0.9470.02热管优良的耐蠕变性定性工业、农业用购薄膜级HDPE 8800 韩国SK 0.9560.04物袋拉伸强度抗冲击强度好购物袋贴断袋垃圾袋排水管薄膜级HDPE 9001 台湾塑胶0.9500.05加工膜稳定性好膜厚平均分布成型膜配向性好购物袋薄膜级HDPE DGDA6098 齐鲁石化0.946-0.9538.0-15杂货袋多层衬里膜耐候膜购物袋薄膜级HDPE F00952 沙特SABIC 0.9520.05杂物袋薄型高强度薄膜包装袋薄膜级HDPE F600 大韩石油0.9570.035抗撕裂强度高高刚性工业用衬里重包装袋薄膜级HDPE FB2310 北欧化工0.931 0.2收缩薄膜含抗氧化剂,硬度高高的热粘性薄膜级HDPE H5604F泰国Cementhai0.9560.04薄膜拉伸性挤强度高薄膜级HDPE HF0961 马来西亚大藤0.950 0.1食品袋商品袋薄膜级HDPE HHM TR144 茂名石化产品袋薄膜级HDPE HHM TR144上海金菲石油化工0.9460.19垃圾袋多层复合袋薄膜级HDPE HTA 001 HD 埃克森美孚0.952 0.9包装袋垃圾袋衬垫薄膜级HDPE HXMTR550上海金菲石油化工0.951 0.2薄膜级HDPE JHM9450F吉化合成树脂厂0.9510.16购物袋包装膜高强度薄膜级HDPE JHM9455F吉化合成树脂厂0.9560.28挺括度兼顾加工性能及刚性与韧性的平衡工业用薄膜级HDPE MH602 上海石化0.946 0.2衬垫、重包装袋高强度挺括度注塑HDPE低压聚乙烯MI ：5 属于低熔指MI ：10 属于中熔指MI ：20级属于高熔指玩具家庭用品注塑级HDPE 17450N 美国陶氏0.950 17低温冲击强度好光泽度和硬度好注塑级HDPE 5621D 中海壳牌塑料小瓶注塑级HDPE 2200J中国石油大庆石化0.961 ～0.9673.5～7.5周转箱工业部件瓶鱼筐周转箱托盘体注塑级HDPE 2908 抚顺乙烯化工0.960 8育设施安全帽鱼箱日用品周转箱托盘体注塑级HDPE 2911 抚顺乙烯化工0.960 20育设施安全帽鱼箱日用品食品容注塑级HDPE 3101加拿大PETROMONT0.954 20器家用容器薄壁零部件摩托车防护板注塑级HDPE 5306J 扬子石化0.951-0.9555.0-7.及挡泥板瓶盖周转箱塑料托盘绳索渔注塑级HDPE 60550AG 兰州石化0.954-0.9605.0-10网单丝包装延伸条带工业用注塑级HDPE 9006雪佛龙菲利普斯0.953 6.6桶汽车应用泡沫零部件汽车零注塑级HDPE 9018雪佛龙菲利普斯0.952 20部件玩具牛奶瓶帽家用容器注塑级HDPE BI-56250 巴西Riopol 0.956 25食品容器盖子壁注塑产品注塑性零部件高分子量零部注塑级HDPE DMDA 8007 美国陶氏0.9658.25件刚性好抗应力性好成型零件光泽性好注塑级HDPE DMDA 8007 兰州石化0.963 8.6注塑级HDPE DMDA 8008 兰州石化0.955 7.6器皿玩具食品注塑级HDPE DMDA 8920 美国陶氏0.954 20容器韧性抗应力性加工性注塑级HDPE HA7260 吉化石化0.957 17注塑级HDPE HD5070EA 盘锦乙烯0.954-0.9626.1-8.注塑级HDPE HD50MA180 印度石化0.950 18注塑级HDPE HD5620EA 伊朗石化0.956 20器皿玩具封闭容器注塑级HDPE HD6070EA 独山子石化945-9666.5-9.周转箱筐类座椅托盘注塑级HDPE HI 2053米尔斯泰因muehlstein0.953 20贮藏容器玩具板条箱垃圾桶注塑级HDPE HI 960米尔斯泰因muehlstein0.960 9家庭用品水果和蔬菜盘周转箱注塑级HDPE HMA025 埃克森美孚HMA025 8强度要求较高的家庭用品注塑级HDPE IG464-C努发克novachemicals0.964 10板条箱货盘棺罩注塑级HDPE IG762-A努发克novachemicals0.962 7箱子托盘容器搬注塑级HDPE JH910 韩国SK 0.926 8.5运箱提桶板条箱注塑级HDPE JK910 韩国SK 0.961 20家庭用品适用于快速生注塑级HDPE JHC7260 吉化石化0.957 8产大众的商品大的浇铸件注塑级HDPE LH6070 韩国大林0.961 7.5 玩具食品容注塑级HDPE M200056 沙特SABIC 0.956 20器家用器皿玩具盖罩注塑级HDPE M80064S 沙特SABIC 0.964 8周转箱盘箱壳把手注塑级HDPE 0750 沙特SABIC可以取代7000F可以与注塑级HDPE F04660 沙特SABICLDPE混增加刚性注塑级HDPE M5018L 印度海尔帝亚0.950 18薄壁件家用器具玩具注塑级HDPE M60200 印度信诚0.958 21家庭用具注塑级HDPE ME2500S 韩国LG 0.952 2饮料瓶盖容器垃注塑级HDPE ME5000 韩国LG 0.952 5圾桶矿泉水瓶盖家用产品大型注塑级HDPE ME9180 韩国LG 0.958 18成型品工业用零件运箱集装箱运输垃圾箱和注塑级HDPE I4 伊朗石化0.954 3.5鱼箱注射成型高冲击强度和低翘曲拉丝级HDPE包装膜拉丝级HDPE 5000S 韩国湖南0.954 0.8单丝绳渔网线袋拉丝级HDPE 5000S中国石油兰州石化0.949-0.9530.8-1.2绳索网用单丝中空制品管材单丝扁丝延伸拉丝级HDPE 5000S中国石油大庆石化0.954条渔网绳索布纱编织袋拉丝级HDPE 5000S 北京燕山石化0.950 0.9膜网绳拉丝级HDPE 5000S 扬子石化0.948-0.9540.8-1.2薄膜中空容器管道单丝延伸缘制品绳索渔网防水防红外拉丝级HDPE HD5000S 泰国PTT 0.954 0.8篷布编织袋韧性和外观良好绳网扁纱圆拉丝级HDPE 8010 台湾塑胶0.956 1丝帆布发泡板押出平板拉丝级HDPE E52009 印度信诚0.9520.85拉丝级HDPE HD-T10 印度海尔帝亚0.950 0.9网绳子麻线拉丝级HDPE HD5010EA 盘锦乙烯0.947-0.9540.6-1.单丝扁丝鱼网绳拉丝级HDPE HD53EA010 印度石化0.953 1 单丝拉丝级HDPE HD5410AA 独山子石化0.947-0.9560.62-1.3容器农膜绳缆单丝袋子容器饮料拉丝级HDPE HD6095澳大利亚Qenos0.9600.85瓶冲击强度高坚硬度好拉丝带易加工拉伸性拉丝级HDPE HHM TR147 茂名石化0.9510.55好抗纤维化性能好含高纤度单丝韧性好极观中空级HDPE大型容器（化工中空级HDPE 2500 韩国SK 0.9640.25药品容器）抗冲击强度好挺度好小型容器( 洗涤中空级HDPE 2520 韩国SK 0.9580.35桶淋浴桶) 中空吹瓶快速成型硬度好分子量和密度中空级HDPE 2600S 韩国SK 0.963 0.2平衡性好高抗冲高耐环境应力开裂性中空级HDPE 5310B 扬子石化化学、工业容器中空级HDPE 5502 韩国大林0.9550.35加工性好冲击强度和硬度漂白剂洗涤剂中空级HDPE 5502 道达尔( 美国) 0.9550.35工业化学品适合食物包装良好的应性出色的刚度家庭和工业化中空级HDPE 9512H雪佛龙菲利普斯0.9540.35学容器较好的冲击阻力化状品中空级HDPE B303 大韩油化0.9580.33和食用油容器耐拉伸高刚性中空级HDPE B53-35H-011 美国英力士0.9550.35食品药品农用及工业化学品用容器薄壁中空中空级HDPE B5429 沙特sabic 0.954 0.3部件坚韧顶部负荷强度及加工性的优秀组合中小型容器聚乙烯网薄膜高中空级HDPE BE0400 韩国LG 0.955 0.4刚性和流动性抗环境应力开裂性良好食品、饮料包装中空级HDPE DMDH-6400 NT7 美国陶氏0.961 0.8薄壁零部件家用器皿强亮泽冲性能拉伸强度性能优越容器灌装产品中空级HDPE EHM6007雪佛龙菲利普斯0.964 0.7良好的冲击强度和刚度润滑油瓶食用中空级HDPE ES-60004 巴西Riopol 0.9600.35油瓶化妆品瓶饮料瓶玩具药物包装密度中空级HDPE HB5502B 台塑美国0.9550.35高硬度高耐环境应力性强盛装活性较高中空级HDPE HD5401AA 上海赛科0.953 9.5化学品的容器非耐压管盛装食中空级HDPE HD5502AA 上海赛科0.955 0.2品、油和化学品的容器5 升以下中空容器盛装食品、油中空级HDPE HD5502FA 上海赛科0.955 5和普通化学品含一定PPA 好的加工性能和制品表产量高能耗低制品表面光洁度好漂白剂洗涤药品化学化妆品中空级HDPE HHM5502 茂名石化0.9550.35润滑油瓶耐热耐寒性高刚性抗应力开裂性洗涤剂化妆品工业化学品容器润滑油瓶耐中空级HDPE HHM5502上海金菲石油化工0.9550.35热耐寒性化学稳定性高刚性韧性和耐环境应力开裂性化学品漂白剂容器和中空级HDPE HHM5502 新加坡菲利浦0.9550.35工业配件硬度高ESCR好加工易包装化中空级HDPE HD5502GA 独山子石化0.950-0.9560.7-1.3学品油类食品家用容器工食品个人护理抗应中空级HDPE 菲律宾NPCA 0.9530.23力开裂性高刚性高熔体强度温和的膨胀特性药物包装高密中空级HDPE HB5502B 台塑美国0.9550.35度硬度高耐环境应力性强30 升化学品家庭产品油和食中空级HDPE HD5502S 英力士INEOS 0.955 0.2品包装易加工高刚性耐环境应力开裂冲击强度好家用及化学容中空级HDPE HHM 5502BN雪佛龙菲利普斯0.9550.35器食品药品包装高刚度加工性拉丝级PP拉丝纺拉丝级PP T30S 福建联合 3.4丝胶带均聚适用于通用级挤也适于注塑生产拉丝级PP T30S 兰州石化 2.6拉丝级PP T30S 大庆石化2.9-3.5纺织撕裂膜地毯衬底纺织单丝（割裂）膜用于包装袋地毯背衬（基布）拉丝级PP T30S 独山子石化2.0-4.单丝捻线绳缆（遮阳或覆盖用）彩条布打包袋和其它丝类等单丝类拉丝级PP H101T（副）日本住友3.5拉丝级PP S1003 上海赛科0.905 3单丝带绳拉丝级PP S1003 独山子石化0.905 3单丝扁丝绳注塑级PP汽车零部件蓄注塑级PP M700R 上海石化7.0±1.8电池壳家用电器零部件嵌段共聚性能白色颗粒强度好耐磨损抗冲击耐应力开裂化学稳定性绝缘性耐热性注塑级PP M500R 上海石化5.0±1.5汽车工业家具注塑级PP M500 上海石化5.0±1.2注塑小型注塑件均聚注塑注塑级PP M180R 上海石化1.8±1.0周转箱、重包装嵌段共聚注塑级PP M2600R 上海石化26±4.0洗衣机内桶嵌段共聚注塑级PP 1600家居用品板条箱集装箱椅子玩具清洁剂桶注塑级PP AV161 日本住友0.900 5.5嵌段共聚物注射中等流动性高冲击高硬度高耐热稳定性HJ730L 高结韩国三星0.910 5咖啡壶等耐热晶HCPP均(部件耐聚) 137℃高温,有UL认证替代ABS等BU510 高结晶耐刮擦韩国三星0.910 9( 共聚)/ 高亮度BI530 反应器聚合TPORTPO 韩国三星0.910 10割草机外壳高抗冲、常温不断BJ950 共聚韩国三星0.900 100 改性高流动性AV161 共聚日本住友0.900 5.5 童车高抗冲洗衣机转桶底AW564共聚日本住友0.900 9 盘/ 托盘洗衣机AR564 共聚日本住友0.900 25内桶高流动性AZ564G共聚日本住友0.900 38 电器高流动性。
缠绕膜制造用的牌号（掺入30%）强度高于LDPE 不含爽滑和开口掺2045G和5100G 增加强度掺AFFINITY-OG增加韧性LLDPE缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE （6c）薄膜级LLDPE薄膜级LLDPE缠绕膜LLDPE （6c）缠绕膜LLDPE （6c）缠绕膜LLDPE( 8C线性）茂金属茂金属茂金属茂金属茂金属茂金属茂金属茂金属缠绕茂金属膜缠绕茂金属膜缠绕茂金属膜缠绕膜茂金属（6c）缠绕膜茂金属缠绕膜茂金属茂金属缠绕膜茂金属茂金属茂金属茂金属茂金属茂金属茂金属茂金属烯超低密度聚乙烯超低密度聚乙烯POE弹性体PE弹性体PE弹性体PE弹性体PP弹性体弹性体弹性体薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE 薄膜级 LLDPE薄膜级 LLDPE 薄膜级 LLDPE 1820S1 印尼 薄膜级 LLDPE 201XV 福建联合 薄膜级 LLDPE 7087 科威特EQUATE 1 薄膜级 LLDPE 新加坡注塑级 LLDPE 注塑级 LLDPE 注塑LLDPE级注塑级LLDPE 注塑级 LLDPE 注塑级LLDPE注塑级LLDPE注塑级LLDPE 注塑级LLDPE 注塑级LLDPE 高压花料 挤出涂覆级LDPE 注塑级LDPELDPE注塑级LDPELDPE 注塑级LDPELDPELDPELDPE 高压涂覆挤出级LDPE涂覆级LDPE涂覆级LDPE 涂覆级LDPE 注塑级LDPE挤出级LDPE挤出级LDPE挤出级LDPELDPE高压薄膜LDPELDPELDPELDPE 高压重包装注塑级LDPELDPELDPELDPE 薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE 薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE 薄膜级LDPE 薄膜级LDPE 薄膜级LDPE 薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE 薄膜级LDPE 薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE注塑级LDPE注塑级LDPE注塑级LDPE 注塑级LDPE注塑级LDPE注塑级LDPE注塑级LDPE注塑级LDPE注塑级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE 涂覆级LDPE涂覆级LDPE 涂覆级LDPE 涂覆级LDPE 涂覆级 LDPE 7008 美国陶氏 薄膜级 HDPE 薄膜HDPE级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE 级薄膜HDPE级 薄膜级HDPE薄膜级 HDPE 薄膜级 HDPE 薄膜级HDPE薄膜级HDPE 薄膜级 HDPE注塑级HDPE 低压聚乙烯 MI ：5属于低熔指 MI ：10属于中熔指 MI ：20注塑级HDPE 注塑级 HDPE 注塑级 HDPE 注塑HDPE级注塑HDPE 级注塑HDPE 级注塑HDPE 级注塑HDPE 级注塑HDPE 级注塑HDPE 级注塑HDPE 级注塑HDPE 级注塑级HDPE 注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE 注塑级HDPE注塑级HDPE 注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE 注塑级HDPE 注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE 拉丝级HDPE 拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE拉丝级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE 中空HDPE级中空HDPE 级中空HDPE 级中空HDPE 级中空HDPE 级中空HDPE 级中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE 中空级HDPE中空级HDPE 拉丝级PP拉丝级PP拉丝级 PP 拉丝级PP拉丝级PP 拉丝级 PP 拉丝级 PP 拉丝级PP注塑级PP注塑级PP注塑级PP注塑级PP 注塑级PP 注塑级 PP 注塑级PP注塑级PP。
陶 氏 化 学 公 司物 料 安 全 资 料 表产 品 名 称 : HFDG-4201 生 效 日 期 : 2000/11/08说 明 书 编 码 : 23500 第 1 页 / 共 10 页陶 氏（ 在 下 文 中，仅 在 本 MSDS中，指 的 是 陶 氏 化 学 公 司 和 陶 氏 化 学 太 平 洋 有 限 公 司 ）鼓 励 和 期 望 你 们 阅 读 并 且 了 解 整 个 MSDS，因 为 在 这 篇 文 献 里 有 重 要 的 信 息 。
陶 氏 期 望 你 们 遵 循 在 这 篇 文 献 里 已 被 确 定 的 防 范 措 施 ，除 非 你 们 的 应 用 条 件 要 求 其 它 适 当 的 方 法 或 方 式。
1. 化 学 产 品 标 识 和 公 司 资 料 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION1.1化 学 产 品 标 识产 品 名 称 : HFDG-4201产 品 代 号:860751.2公 司 资 料名 称 : 陶 氏 化 学 太 平 洋 有 限 公 司地 址 : 香 港 湾 仔 港 湾 道 30 号 新 鸿 基 中 心 47楼香 港 邮 箱 711 号 Tel : (852) 2879-73331.3应 急 电 话24小 时 紧 急 联 系 电 话 号 码 ： （86) 532 - 8388 9090 （ NRCC ）国 家 化 学 事 故 应 急 咨 询 专 线，中 国* 陶 氏 化 学 公 司 的 商 标产 品 名 称 : HFDG-4201 生 效 日 期 : 2000/11/08说 明 书 编 码 : 23500 第 2 页 / 共 10 页2. 主 要 成 分COMPOSITION INFORMATION成 分 CAS 号 比 重乙 烯 均 聚 物 009002-88-4 >= 95 % Ethene, Homopolymer双(1－甲 基－1－苯 乙 基) 过 氧 化 物 000080-43-3 >= 1 <= 5 %Bis(1-methyl-1-phenylethyl) Peroxide乙 酰 苯 000098-86-2 <= 1 % Acetophenone过 氧 化 羟 基 异 丙 苯 000080-15-9 <= 200 ppm Isopropylbenzene hydroperoxide枯 烯 000098-82-8 >= 10 <= 120 ppmCumene3. 危 害 特 性HAZARDS IDENTIFICATION3.1 危 险 性 综 述 :外 观 ： 0.3 cm (1/8 英 寸) 直 径 的 带 白 色 压 丸 。
增加强度掺AFFINITY-OG增加韧性LLDPE缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕LLDPE膜缠绕膜 LLDPE （6c ）薄膜级LLDPE 薄膜级LLDPE 缠绕膜 LLDPE （6c ）缠绕膜 LLDPE （6c ）缠绕膜 LLDPE(8C 线性） 茂金属茂金属茂金属茂金属茂金属茂金属茂金属茂金属缠绕膜茂金属缠绕膜茂金属缠绕膜茂金属缠绕膜茂金属（6c）缠绕膜茂金属缠绕膜茂金属茂金属缠绕膜茂金属茂金属茂金属茂金属茂金属茂金属茂金属茂金属超低密度聚乙烯超低密度聚乙烯超低密度聚乙烯POE弹性体PE弹性体PE弹性体PE弹性体PP弹性体弹性体弹性体薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE缠绕膜LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE薄膜级LLDPE 1820S1 印尼薄膜级LLDPE 201XV 福建联合薄膜级LLDPE 7087科威特EQUATE1薄膜级LLDPE 新加坡注塑级LLDPE注塑级LLDPE注塑级LLDPE注塑级LLDPE注塑级LLDPE 注塑级LLDPE注塑级LLDPE注塑级LLDPE注塑级LLDPE注塑级 LLDPE高压花料挤出涂覆级 LDPE 注塑级 LDPE LDPE 注塑级LDPELDPE 注塑级 LDPELDPELDPE LDPE 高压涂覆 挤出级LDPE涂覆级LDPE 涂覆级 LDPE 涂覆级 LDPE 注塑级 LDPE挤出级LDPE挤出级LDPE 挤出级LDPELDPE 高压薄膜LDPELDPELDPELDPE 高压重包装注塑级LDPELDPELDPELDPE 薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE 薄膜级LDPE 薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE 薄膜级LDPE 薄膜级LDPE 薄膜级LDPE 薄膜级LDPE薄膜级LDPE薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE 级薄膜LDPE级薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE薄膜级LDPE注塑级LDPE注塑级LDPE注塑级LDPE 注塑级LDPE注塑级LDPE注塑级LDPE 注塑级LDPE注塑级LDPE注塑级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE涂覆级LDPE 7008 美国陶氏薄膜级HDPE薄膜级HDPE薄膜级HDPE 薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE薄膜级HDPE 薄膜级HDPE薄膜级HDPE薄膜级HDPE 薄膜级HDPE 薄膜级HDPE薄膜级HDPE薄膜级HDPE注塑级HDPE 低压聚乙烯 MI：5属于低熔指 MI：10属于中熔指 MI：20注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE 注塑级HDPE注塑级HDPE注塑级HDPE 注塑级HDPE 注塑级HDPE 注塑级HDPE 注塑级HDPE 注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE注塑级HDPE 注塑级HDPE注塑级HDPE注塑级 HDPE注塑级 HDPE 注塑级 HDPE 注塑级 HDPE 注塑级 HDPE 注塑级 HDPE 注塑级 HDPE注塑级 HDPE 注塑级 HDPE注塑级HDPE 注塑级HDPE 拉丝级 HDPE拉丝级 HDPE拉丝级HDPE 拉丝级 HDPE 拉丝级 HDPE 拉丝HDPE级拉丝级HDPE 拉丝级 HDPE 拉丝级 HDPE拉丝级 HDPE 拉丝级 HDPE 拉丝级 HDPE 拉丝级 HDPE拉丝级HDPE 拉丝级HDPE 中空级 HDPE中空级 HDPE 中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE中空级HDPE拉丝级PP拉丝级PP拉丝级 PP 拉丝级PP拉丝级PP 拉丝级 PP拉丝级 PP 拉丝级PP注塑级PP注塑级PP 注塑级 PP 注塑级PP注塑PP 级注塑PP 级注塑PP 级注塑PP 级。
UNION CARBIDE CORPORATIONA Subsidiary of The Dow Chemical CompanyMATERIAL SAFETY DATA SHEETProduct Name: HFDB-4201 EC Effective Date: 03/28/2001 MSDS#: 38719 Page 1 of 16Copyright© 2001, Union Carbide Chemicals & Plastics Technology Corporation.Union Carbide urges each customer or recipient of this MSDS to study it carefully to become aware of and understand the hazards associated with the product. The reader should consider consulting reference works or individuals who are experts in ventilation, toxicology, and fire prevention, as necessary or appropriate to use and understand the data contained in this MSDS.To promote safe handling, each customer or recipient should: 1) Notify its employees, agents, contractors and others whom it knows or believes will use this material of the information in this MSDS and any other information regarding hazards or safety; 2) Furnish this same information to each of its customers for the product; and 3) Request its customers to notify their employees, customers, and other users of the product of this information.1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION1.1 IDENTIFICATIONProduct Name HFDB-4201 ECChemical Name BASE RESIN: Ethene, HomopolymerChemical Family Natural Pelleted Peroxide Crosslinkable Polyethylene Compounds Formula Not applicable (mixture)SynonymNone1.2 COMPANY IDENTIFICATIONUnion Carbide CorporationA Subsidiary of The Dow Chemical Company 39 Old Ridgebury Road Danbury, CT 06817-00011.3 EMERGENCY TELEPHONE NUMBER24 hours a day: CHEMTREC 1-800-424-9300.Number for non-emergency questions concerning MSDS (732) 563-5522 Additional information on this product may be obtained by calling the Union Carbide Corporation Customer Service Center at 1-800-568-4000.2. COMPOSITION INFORMATIONComponent CAS # Amount (%W/W ) Ethene, homopolymer9002-88-4>= 95 %Cumene peroxide80-43-3>= 1 <= 5% Acetophenone98-86-2 < 1%3. HAZARDS IDENTIFICATION3.1 EMERGENCY OVERVIEWAppearance 0.3 cm (1/8 inch) diameter pellets; whitish color.PhysicalStatePelletsOdor Slight characteristic odor.Hazards of product WARNING!CAUSES EYE AND SKIN IRRITATION.AIRBORNE DUST PARTICLES MAY FORMEXPLOSIVE AIR-DUST MIXTURE.VAPOR IN TOP OF SHIPPING CONTAINER, DUSTAND PROCESS FUMES MAY BE HARMFUL IFINHALED AND MAY CAUSE IRRITATION OF SKIN,EYES AND RESPIRATORY TRACT.PLASTIC BAG OR LINER MAY CAUSE STATICIGNITION HAZARD.CONTACT WITH CROSSLINKING BY-PRODUCTSMAY CAUSE ALLERGIC SKIN REACTION.CONTAINS ANTIMONY TRIOXIDE - CAUSESCANCER IN LAB ANIMALS.3.2 POTENTIAL HEALTH EFFECTS General Health HazardsAvoid breathing dust or any fumes that may be generated during processing. Dust causes eye irritation, experienced as stinging and discomfort or pain. Polyolefin pellets or granules are abrasive and may cause mechanical skin irritation. Molten or hot polymer will cause thermal burns. Cumene peroxide may cause skin, eye and respiratory tract irritation. The peroxide in this product may migrate on aging to form a powder on the pellet surface. NOTE: In crosslinking operations there may be secondary decomposition of cumyloxy radicals to yield acetophenone, dimethylbenzyl alcohol and 1-methyl-1-phenylethene. These by-products produce a sweet pungent odor. Eye, skin, and respiratory irritation may be encountered upon exposure to their liquids or vapor. Skin contact with dimethylbenzyl alcohol may cause sensitization and an allergic skin reaction. Acetophenone may accumulate in the headspace of the shipping container. Acetophenone is a skin, eye and respiratory tract irritant. Avoid breathing vapor in top of shipping container.Effects of Single Acute OverexposureInhalation See General Health Hazards.Eye Contact See General Health Hazards.Skin Contact See General Health Hazards.Skin Absorption No evidence of harmful effects from available information.Swallowing No evidence of harmful effects from available information.Chronic, Prolonged or Repeated OverexposureEffects of Repeated Overexposure No adverse effects anticipated from available information. Other Effects of Overexposure None currently known.Medical Conditions Aggravated by ExposureA knowledge of the available toxicology information and of the physical and chemical properties of the material suggests that overexposure is unlikely to aggravate existing medical conditions.3.3 POTENTIAL ENVIRONMENTAL EFFECTSSee Section 12 for Ecological Information.4. FIRST AID PROCEDURES4.1 INHALATIONIf inhaled, remove to fresh air.4.2 EYE CONTACTIn case of dust contact with eye(s), flush eyes thoroughly with water for several minutes. Remove contact lenses, if worn. Call a physician if discomfort persists. For thermal eye burns, immediately flush eyes with water and continue washing for several minutes. DO NOT remove contact lenses, if worn. Obtain medical attention without delay, preferably from an ophthalmologist.4.3 SKIN CONTACTIn case of contact with skin, immediately flush skin with water for a few minutes while removing contaminated clothing and shoes. Wash clothing before reuse. For thermal skin burns, remove clothing, any jewelry, and gross debris from the burned area. Leave blisters intact. Wash the area thoroughly with room temperature tap water. Do not use ice. Cover the wounded area with gauze dressing moistened with cool water; keep the dressing moist. Seek medical attention. 4.4 SWALLOWINGNo emergency care anticipated.4.5 NOTES TO PHYSICIANThere is no specific antidote. Treatment of overexposure should be directed at the control of symptoms and the clinical condition of the patient.5. FIRE FIGHTING MEASURES5.1 FLAMMABLE PROPERTIESFlash Point - Closed Cup:Not determined.Flash Point - Open Cup:Not determined.Autoignition Temperature:Generally 315-371°C (600-700°F) depending on individual product composition.Flammable Limits In Air:Lower Not determined.Upper Not determined.5.2 EXTINGUISHING MEDIAExtinguish fires with water spray or apply alcohol-type or all-purpose-type foam by manufacturer's recommended techniques for large fires. Use carbon dioxide or dry chemical media for small fires.5.3 EXTINGUISHING MEDIA TO AVOIDNo information currently available.5.4 SPECIAL FIRE FIGHTING PROCEDURESDo not direct a solid stream of water or foam into burning molten material; this may cause spattering and spread the fire.5.5 SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERSUse self-contained breathing apparatus and protective clothing.5.6 UNUSUAL FIRE AND EXPLOSION HAZARDSAvoid dispersion of dust in air to reduce potential for dust ignition/explosions. Refer to National Fire Protection Association Document NFPA 69 for descriptions of explosion prevention systems.See Section 8.3 - Engineering Controls5.7 HAZARDOUS COMBUSTION PRODUCTSSee Section 10.1 - Thermal Decomposition6. ACCIDENTAL RELEASE MEASURESSteps to be Taken if Material is Released or Spilled:Sweep up and collect in suitable container for disposal. CAUTION: Polyethylene pellets on floors are slippery and can cause falls.Personal Precautions: Wear suitable protective equipment. See Section 8.2 - Personal Protection.Environmental Precautions: To prevent littering, avoid releases to surface waters.7. HANDLING AND STORAGE7.1 HANDLINGGeneral HandlingAvoid contact with eyes, skin, and clothing.Prevent accumulation of dust particles.Maintain proper grounding at all times.Avoid breathing vapor in top of shipping container, dust, and process fumes.Do not handle or empty bag or liner in presence of flammable vapor.Keep container closed.Use with adequate ventilation.Wash thoroughly after handling.FOR INDUSTRY USE ONLY.VentilationLocal exhaust ventilation is recommended for control of airborne dust, fumes, and vapor, particularly in confined areas.Other PrecautionsThe polyethylene fines and dust particles contained in all polyethylene resins are Class St-1 (lowest severity) deflagration hazards under National Fire Protection Association NFPA 68. Your facilities should conform to NFPA-654. Read and understand Union Carbide's "Polyethylene Handling and Storage Guide" which summarizes the appropriate NFPA standards.7.2 STORAGEStore in accordance with good industrial practices. Storage information may be obtained from product-specific Union Carbide Storage and Handling Guides, or by calling a Union Carbide Customer Service Representative.8. EXPOSURE CONTROLS AND PERSONAL PROTECTION8.1 EXPOSURE LIMITSComponent Exposure Limits Skin FormNuisance Dust 10 mg/m3 TWA8 ACGIH Inhalable ParticulateParticulate mattercontaining no asbestosand crystalline silica <1%3 mg/m3 TWA8 ACGIH Respirable particulateParticulate mattercontaining no asbestosand crystalline silica <1%5 mg/m3 TWA8 OSHA Respirable fraction15 mg/m3 TWA8 OSHA Total dust Acetophenone 10 ppm TWA8 ACGIHIn the Exposure Limits Chart above, if there is no specific qualifier (i.e., Aerosol) listed in theForm Column for a particular limit, the listed limit includes all airborne forms of the substancethat can be inhaled.A "Yes" in the Skin Column indicates a potential significant contribution to overall exposure bythe cutaneous (skin) route, including mucous membranes and the eyes, either by contact withvapors or by direct skin contact with the substance. A "Blank" in the Skin Column indicates that exposure by the cutaneous (skin) route is not a potential significant contributor to overall exposure.There are no established OSHA, ACGIH or UCC exposure limits for polymer, however, Union Carbide treats polymer dust as a nuisance particulate.8.2 PERSONAL PROTECTIONRespiratory Protection:Use NIOSH-approved respirator if unable to control airborne dust, fumes, and vapor.Ventilation:Local exhaust ventilation is recommended for control of airborne dust,fumes, and vapor, particularly in confined areas.Other ProtectiveEquipment:Wear gloves and suitable eye protection.8.3 ENGINEERING CONTROLSPhysical handling and processing of this product such as through pneumatic conveying and grinding, etc., can generate fines and dust particles that can, under certain conditions, pose an explosion hazard. We recommend that the systems used be: (1) equipped with filters of adequate size, (2) operated and maintained in a manner to ensure that no leaks develop and (3) adequately grounded. We further recommend good housekeeping be practiced throughout the facility.9. PHYSICAL AND CHEMICAL PROPERTIESPhysical State:PelletsAppearance:0.3 cm (1/8 inch) diameter pellets; whitish color.pH: Not currently available.Solubility in Water (by weight): Not determined.Odor:Slight characteristic odor.Solid Density:0.89 - 0.93 g/cm355.561 - 58.058 lb/ft3Boiling Point (760 mmHg):Not determined.Freezing Point:Not determined.Specific Gravity (H2O = 1):Not determined.Vapor Pressure at 20°C:Not determined.Vapor Density (air = 1):Not determined.Melting Point: 110 °C 230 °F10. STABILITY AND REACTIVITY10.1 STABILITY/INSTABILITY StableConditions to Avoid: Temperatures over 150°C (302°F) may cause premature resin crosslinking. Prolonged exposure to temperatures over 250°C (482°F) may cause resin decomposition.Thermal Decomposition: Carbon monoxide is highly toxic if inhaled; carbon dioxide in sufficient concentrations can act as an asphyxiant. Aldehydes are known irritants. In addition, some aldehydes are skin sensitizers and/or probable carcinogens. Acute overexposure to the decomposition products may result in headache, nausea, and irritation of the eyes, skin and respiratory tract. Local exhaust ventilation is recommended for control of airborne dust, fumes and vapor.Thermal Decomposition ProductsCarbon monoxideCarbon dioxideAldehydesAcetophenoneDimethylbenzyl Alcohol1-Methyl-1-phenyletheneMethaneEthanePhenolOther Organic Vapor10.2 HAZARDOUS POLYMERIZATION Will Not Occur.10.3 INHIBITORS/STABILIZERS Not applicable.11. TOXICOLOGICAL INFORMATIONThe following information is based on published toxicity data, including manufacturer's MSDSs, for associated base polymers (ethene homopolymer, 1-butene polymer with ethene, and 1-hexene polymer with ethene) and cumene peroxide. These data were not produced by Union Carbide Corporation. Most materials that are compounded in and, therefore, not available for exposure are not considered in this section.ACUTE TOXICITYPeroralRat; Lethal Dose = > 7950mg/kg; polymerPeroralRat; LD50 = 4100mg/kg; Cumene peroxidePercutaneousRabbit; LD50 = > 1000mg/kg; Cumene peroxideInhalationVariable Dust Concentration Studies, 0.5 h Mouse; LC50 = 12000mg/m3; polymerIRRITATIONSkin:Results: Polymer not irritating, but pellets or granules may cause abrasion or other mechanical irritation; cumene peroxide may be mildly irritating.Eye:Results: Polymer slightly irritating; cumene peroxide produced mild conjunctivitis in rabbits.REPEATED EXPOSUREInclusion of 1-butene polymer with ethene in the diet of rats for 90 days at 5% or less caused no adverse effects.SENSITIZATION (ANIMAL AND HUMAN STUDIES)Polymer not considered to be a skin sensitizer; cumene peroxide was negative for sensitization in the guinea pig.DEVELOPMENTAL TOXICITYCumene peroxide has reportedly caused embryotoxicity in chick embryos, with an ED50 of 1.2 µmole/egg.CHRONIC TOXICITY AND CARCINOGENICITYAccording to published data, inclusion of polyethylene in the diet of rats at 8 g/kg/day did not result in treatment-related effects. Polyethylene implanted into rats and mice has reportedly caused local tumorigenic activity at doses of 33 to 2120 mg/kg, but the relevance to human exposure is not certain. There has been extensive use of polyethylene in industry and medicine.GENETIC TOXICOLOGYIn VitroCumene peroxide was negative for genotoxic activity in bacterial assays.12. ECOLOGICAL INFORMATION12.1 ENVIRONMENTAL FATEDegradation of this polyethylene product is not anticipated under environmental exposure conditions.12.2 ECOTOXICITYThe following information is based on toxicity data from the manufacturer's MSDS for cumene peroxide. These data were not produced by Union Carbide Corporation.Toxicity to Micro-organismsBacterial Multiplication Inhibition Test, Pseudomonas putida; IC50Result value: > 5000 ppmToxicity to FishFathead Minnow; 96 h; LC50Result value: < 10 mg/l12.3 FURTHER INFORMATIONNone.13. DISPOSAL CONSIDERATIONS13.1 WASTE DISPOSAL METHODDispose in accordance with all applicable Federal, State, and local environmental regulations. Empty containers should be recycled or disposed of through an approved waste management facility.13.2 DISPOSAL CONSIDERATIONSWhen disposed of, this product is not considered a RCRA hazardous waste.Disposal methods identified are for the product as sold. For proper disposal of used material, an assessment must be completed to determine the proper and permissible waste management options permissible under applicable rules, regulations and/or laws governing your location. 14. TRANSPORT INFORMATION14.1 U.S. D.O.T.NON-BULKProper Shipping Name : NOT REGULATEDBULKProper Shipping Name : NOT REGULATEDThis information is not intended to convey all specific regulatory or operationalrequirements/information relating to this product. Additional transportation system information can be obtained through an authorized sales or customer service representative. It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material.15. REGULATORY INFORMATION15.1 FEDERAL/NATIONALC OMPREHENSIVE E NVIRONMENTAL R ESPONSE,C OMPENSATION, AND L IABILITY A CT OF 1980S ECTION 103 (CERCLA)The following components of this product are specifically listed as hazardous substances in 40 CFR 302.4 (unlisted hazardous substances are not identified) and are present at levels which could require reporting:Component CAS # AmountAcetophenone98-86-2 < 1.0000% Isopropylbenzene hydroperoxide80-15-9 <= 200.0000PPMCumene98-82-8>= 10.0000 <=120.0000PPMS UPERFUND A MENDMENTS AND R EAUTHORIZATION A CT OF 1986T ITLE III(EPCRA)S ECTIONS 302 AND 304 The following components of this product are listed as extremely hazardous substances in 40 CFR Part 355 and are present at levels which could require reporting and emergency planning: None.S UPERFUND A MENDMENTS AND R EAUTHORIZATION A CT OF 1986T ITLE III(EPCRA)S ECTION 313The following components of this product are listed as toxic chemicals in 40 CFR 372.65 and are present at levels which could require reporting and customer notification under Section 313 and 40 CFR Part 372:This product does not contain chemicals listed as toxic chemicals in 40 CFR 372.65 atlevels which could require reporting or customer notification under Section 313., Decomposition of the peroxide in this product, such as may be encountered during crosslinking operations, can yield acetophenone. Acetophenone is listed as a toxicchemical in 40 CFR 372.65 and could require reporting and customer notification under Section 313 and 40 CFR Part 372.OSHA HAZARD COMMUNICATION:Products made from this resin that retain a sufficient quantity of peroxide by-products to produce a health hazard in normal use or foreseeable misuse would be subject to the requirements of OSHA, 29 CFR 1910.1200, Hazard Communication.S UPERFUND A MENDMENTS AND R EAUTHORIZATION A CT OF 1986T ITLE III(EPCRA)S ECTIONS 311 AND 312 Delayed (Chronic) Health Hazard : NoFire Hazard : NoImmediate (Acute) Health Hazard : YesReactive Hazard : NoSudden Release of Pressure Hazard : NoCEPA-D OMESTIC S UBSTANCES L IST (DSL)The components of this product are on the DSL or are exempt from reporting under the New Substances Notification Regulations.E UROPEAN I NVENTORY OF E XISTING C OMMERCIAL C HEMICAL S UBSTANCES (EINECS)The components of this product are on the EINECS inventory or are exempt from EINECS inventory requirements.T OXIC S UBSTANCES C ONTROL A CT (TSCA)All components of this product are on the TSCA Inventory or are exempt from TSCA Inventory requirements.15.2 STATE/LOCALP ENNSYLVANIA (W ORKER AND C OMMUNITY R IGHT-TO-K NOW A CT)This product is subject to the Worker and Community Right-to-Know Act. The following components of this product are at levels which could require identification in the MSDS:None.M ASSACHUSETTS (H AZARDOUS S UBSTANCES D ISCLOSURE BY E MPLOYERS)The following components of this product appear on the Massachusetts Substance List and are present at levels which could require identification in the MSDS:None.N EW Y ORK (H AZARDOUS S UBSTANCES B ULK S TORAGE A CT)New York State Bulk Storage Regulations (6 NYCRR Parts 595-599). This product is covered by 6 NYCRR for bulk storage and release reporting and response. Technical guidance and recommended practices are as follows: STORAGE SYSTEM DESIGN - Should comply with the current versions of the applicable reference documents cited in NYS/DEC Chemical Bulk Storage Regulations Sections 598.1(j), 598.2, 598.3, and 598.5 (for existing tanks) or Sections 599.1 to 599.10 (for new or substantially modified tanks). INSPECTION AND MAINTENANCE - Inspection and maintenance procedures and testing of equipment should comply with NYS/DEC Regulations Sections 598.6 to 598.10. TRANSFER AND UNLOADING - These operations should comply with NYS/DEC Regulations Section 598.4. See also other sections of this MSDS.C ALIFORNIA P ROPOSITION 65(S AFED RINKING W ATER AND T OXICE NFORCEMENT A CT OF 1986)This product contains no listed substances known to the State of California to cause cancer, birth defects or other reproductive harm, at levels which would require a warning under the statute.This section provides selected regulatory information on this product including its components. This is not intended to include all regulations. It is the responsibility of the user to know and comply with all applicable rules, regulations and laws relating to the product being used.16. OTHER INFORMATION16.1 AVAILABLE LITERATURE AND BROCHURESAdditional information on this product may be obtained by calling the Union Carbide Corporation Customer Service Center at 1-800-568-4000.Read and understand Union Carbide's "Polyethylene Handling and Storage Guide" prior to handling.16.2 SPECIFIC HAZARD RATING SYSTEMNFPA ratings for this product are: H - 1 F - 1 R - 0HMIS ratings for this product are: H - 1 F - 1 R - 0These ratings are part of specific hazard communications program(s) and should be disregarded where individuals are not trained in the use of these hazard rating systems. You should be familiar with the hazard communication applicable to your workplace.16.3 RECOMMENDED USES AND RESTRICTIONSFOR INDUSTRY USE ONLYDuring crosslinking operations, the peroxide in this compound will decompose to form by-products including methane, a flammable gas, and acetophenone, dimethylbenzyl alcohol and alpha methylstyrene. These by-products are released slowly from the crosslinked product over time. Accumulated methane in the air may be ignited by pilot lights, other flames, smoking, sparks, heaters, electrical equipment, static discharges or other ignition sources. Exposure to by-products accumulated in containers and from crosslinked products may cause eye, skin and respiratory irritation and an allergic skin reaction. Avoid storing crosslinked product made from this compound in unvented, confined areas. Use with adequate ventilation. Wear gloves and suitable eye protection.NOTICE: This product is specifically designed for wire and cable applications. It is unsuitable for use in applications such as direct or indirect food contact, medical device or pharmaceutical applications, or for potable water applications without express NSF or UL approval.16.4 REVISIONVersion: 1.0Revision: 03/28/2001Most recent revision(s) are noted by the bold, double bars in left-hand margin throughout this document.16.5 LEGENDA AsphyxiantBacterial/NA Non Acclimated BacteriaF FireH HealthHMIS Hazardous Materials Information SystemavailableN/A NotNFPA National Fire Protection AssociationO OxidizerFormerP PeroxideR ReactivitySecretTS TradeVOL/VOL Volume/VolumeReactiveW WaterW/W Weight/WeightThe opinions expressed herein are those of qualified experts within Union Carbide. We believe that the information contained herein is current as of the date of this Material Safety Data Sheet. Since the use of this information and the conditions of the use of the product are not under the control of Union Carbide, it is the user's obligation to determine conditions of safe use of the product.。
