当前位置：文档之家 › 海康威视摄像头产品用户指南说明书

海康威视摄像头产品用户指南说明书

  • 格式：pdf
  • 大小：1.31 MB
  • 文档页数：9

© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: How to Configure Temperature Screening Thermographic Camera 1. General Parameters  Temperature Measurement Range 30.0-45.0 Degrees Celsius  Temperature Measurement Accuracy ± 0.5 Degrees Celsius  Camera Resolution and Focal Length DS-2TD1217B-3/PA: Thermal: 160 × 120, Optical: 2688 × 1520, 3mm DS-2TD1217B-6/PA: Thermal: 160 × 120, Optical: 2688 × 1520, 6mm DS-2TD2617B-6/PA: Thermal: 160 × 120, Optical: 2688 × 1520, 6mm DS-2TD2637B-10/P: Thermal: 384 × 288, Optical: 2688 × 1520, 10mm DS-2TD2636B-15/P: Thermal: 384 × 288, Optical: 2688 × 1520, 15mm  AI Face Detection Multiple targets skin-surface temperature detection at the same time (wearing masks or not would not affect this detection)  Operating Environment Indoor environment with calm air condition; 10-35 Degrees Celsius 2. Installation 1) Installation Cautions The performance of this Temperature-screening scheme is greatly affected by environment. This scheme would apply only to those indoor environments, or the scenarios with calm air and consistent temperature. Besides, the relative installation location of devices and the ambient light (too bright or too dark) greatly affect the accuracy of face detection. In order to improve measurement accuracy and reach better performance of human face detection, the installation environment has to meet certain requirements: 1. Select installation environments with one-direction path to ensure that cameras capture the full faces of all passing persons. 2. Select installation environments with stable and sufficient lighting conditions. Supplementary light is required under backlight or insufficient lighting conditions © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: to ensure the clear visibility of facial features. 3. Select indoor environments with calm air and consistent temperature condition. Outdoor environments with rapid temperature changes are not recommended. 4. If this scheme is used in entrance scenes that connect indoors and outdoors environments, It is suggested that the installation location should be kept at a certain distance from the entrance (such as customs or security checkpoints). 5. Avoid objects with high or low temperature placed in the scene. 6. The devices should be installed firmly, thereby avoiding face detection and temperature measurement errors caused by shaking. 7. Skin-surface temperature can be affected by environment temperature, if it’s too hot and cold in outdoor environment, we recommend people to stay indoor for more than 3 minutes before temperature measurement. 2) Camera Installation  The camera should be set right in front of the one-direction path, capturing the full faces of passing persons. The installation height and the distance between the camera and measured objects is depended on the resolution and focal length of thermographic camera, as shown in the following table.  There are tripods, tripod adapters, wall mount offered by HIKVISION for flexible or fixed placement, but these items require additional purchase. Only device with resolution of 384*288 is recommended to be installed on the wall. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: 3. Configuration 1) Select VCA Resource Type Steps: 1. Enter VCA Resource Type interface: Configuration > System > Maintenance > VCA Resource Type. 2. Select Temperature Screening as VCA Resource Type. 3. Click Save and wait for device restart. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: 2) Set Local Configuration Steps: 1. Go to the Local Configuration interface: Configuration > Local. 2. Click to enable the following settings:  Rules: It refers to the rules on your local browser; select Enable to display bounding boxes and temperature information when the face target is detected.  Display Rules Info. on Capture: Select Yes Display rules information on the capture.  Display Temperature Info.: Select Yes to display temperature information with temperature measurement rule configured.  Display Temperature Info. on Capture: Select Yes to display temperature information on the capture. 3. Click Save. © Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788 E-Mail: 3) Settings of Temperature Screening Steps: 1. Go to the Temperature Screening Settings interface: Temperature Screening > Basic Settings. 2. Configure the following settings:  Enable Temperature Measurement: Check this box to enable temperature measurement.  Display Temperature Info. on Stream: Check this box to display temperature information on stream.  Emissivity: The relative ability of material surface to emit energy by radiation. For human skin, this value is normally set as 0.98.  Distance Mode: Set mode as ‘Self Adaption’.  Distance: The actual distance between the camera and measured object. 3. Click Save.

合集下载

海康威视去雾型网络摄像机快速操作指南

海康威视去雾型网络摄像机快速操作指南

网络摄像机

快速操作手册

V5.0.0 杭州海康威视数字技术股份有限公司 技术热线：400-700-5998

杭州海康威视数字技术股份有限公司|版权所有（C） 非常感谢您购买我公司的产品，如果您有什么疑问或需要请随时联系我们。 本手册适用于以下型号的的网络摄像机： 枪型Ⅰ：DS-2CD883F-E(W)、DS-2CD855F-E、DS-2CD854F-E(W)、DS-2CD854FWD-E、DS-2CD853F-E(W)、DS-2CD864FWD-E(W)、DS-2CD864F-E(W)、iDS-2CD864FWD-E/F、iDS-2CD864FWD-E/B、iDS-2CD855F-E/D、iDS-2CD864F-E/D、DS-2CD863PF(NF)-E(W)、iDS-2CD893PF(NF)-E、DS-2CD893PF(NF)-E (W)、DS-2CD893PFWD(NFWD)-E(W)、DS-2CD833F-E(W) 枪型Ⅱ：DS-2CD6213F、DS-2CD6223F、DS-2CD6233F、DS-2CD6233F-SDI、DS-2CD6233F-FCB、DS-2CD6253F 枪型Ⅲ：DS-2CD4012F-(A)(P)、DS-2CD4024F-(A)(P)、DS-2CD4032F-(A)(P)、DS-2CD4012FWD-(A)(P)、DS-2CD4052F-(A)(P)、DS-2CD4032FWD-(A)(P) 半球型Ⅰ：DS-2CD783F-E(I) (Z)、DS-2CD783F-EP、DS-2CD764FWD-E(I)(Z)、DS-2CD764F-E(I)(Z)、DS-2CD755F-E(I)(Z)、DS-2CD754F-E(I)(Z)、DS-2CD754FWD-E(I) (Z)、DS-2CD753F-E(I) (Z)、DS-2CD763PF(NF)-E(I)(Z)、DS-2CD793PF(NF)-E(I)(Z)、DS-2CD793PFWD(NFWD)-E(I)(Z)、DS-2CD733F-E(I)(Z)、DS-2CD4112F-I(Z)、DS-2CD4124F-I(Z)、DS-2CD4132FWD-I(Z) 半球型Ⅱ：DS-2CD7233F-E(I)Z(H)(S)、DS-2CD7253F-E(I)Z(H)(S)、DS-2CD7254F-E(I)Z(H)(S)、DS-2CD7254FWD-E(I)Z(H)(S)、DS-2CD7255F-E(I)Z(H)(S)、DS-2CD7263PF(NF)-E(I)Z(H)(S)、DS-2CD7264FWD-E(I)Z(H)(S)、DS-2CD7264F-E(I)Z(H)(S)、DS-2CD7283F-E(I)Z(H)(S)、DS-2CD7293PF(NF)-E(I)Z(H)(S)、DS-2CD7293PFWD(NFWD)-E(I)Z(H)(S) 半球型Ⅲ：DS-2CD2112(D)-(I)、DS-2CD2132(D)-(I) 半球型IV：DS-2CD7353F-E(I)(S)、DS-2CD7393PF/NF-E(I)(S)、DS-2CD7393PF/NFWD-E(I)(S) 半球型V：DS-2CD2712F(D)-I(S)、DS-2CD2732F(D)-I(S) 筒型Ⅰ：DS-2CD8283F-E(I)(Z)(S)、DS-2CD8264FWD-E(I)(Z)(S)、DS-2CD8264F-E(I)(Z)(S)、DS-2CD8254F-E(I)(Z)(S)、DS-2CD8254FWD-E(I)(Z)(S)、DS-2CD8255F-E(I)(Z)(S)、DS-2CD8253F-E(I)(Z)(S)、DS-2CD8233F-E(I)(Z)(S) DS-2CD4212F-(I)(Z)(H)(S)、DS-2CD4212FWD-(I)(Z)(H)(S)、DS-2CD4224F-(I)(Z)(H)(S) 、DS-2CD4232F-(I)(Z)(H)(S)、DS-2CD4232FWD-(I)(Z)(H)(S) 筒型Ⅱ：DS-2CD864-EI3、DS-2CD864-EI5、DS-2CD855-EI3、DS-2CD855-EI5 筒型Ⅲ：DS-2CD2012(D)-I、DS-2CD2032(D)-I 筒型IV：DS-2CD2212(D)-I3、DS-2CD2212(D)-I5、DS-2CD2232(D)-I3、DS-2CD2232(D)-I5 筒型V：DS-2CD2612F(D)-I(S)、DS-2CD2632F(D)-I(S) 卡片型Ⅰ：DS-2CD8153F-E(I)(W)、DS-2CD8133F-E(I)(W) 卡片型Ⅱ：DS-2CD8433F-EI(W)、DS-2CD8464F-EI(W) )、DS-2CD8464F-EIGW/EIGE/EIGS、DS-2CD8433F-EIGW/EIGE/EIGS 迷你半球型：DS-2CD7164-E、DS-2CD7153-E、DS-2CD7133-E 海螺型：DS-2CD2312(D)-I、DS-2CD2332(D)-I 本手册可能包含技术上不准确的地方、或与产品功能及操作不相符的地方、或印刷错误。我司将根据产品功能的增强而更新本手册的内容，并将定期改进或更新本手册中描述的产品或程序。更新的内容将会在本手册的新版本中加入，恕不另行通知。 0500001030411 杭州海康威视数字技术股份有限公司|版权所有（C） 目录 1 接口介绍 ................................................................................................................................... 1 1.1 枪型摄像机接口介绍 ................................................................................................... 1 1.1.1 枪型Ⅰ摄像机 ................................................................................................... 1 1.1.2 枪型Ⅱ摄像机 ................................................................................................... 3 1.1.3 枪型Ⅲ摄像机 ................................................................................................... 5 1.2 半球型摄像机接口介绍 ............................................................................................... 8 1.2.1 半球型Ⅰ摄像机 ............................................................................................... 8 1.2.2 半球型Ⅱ摄像机 ............................................................................................... 9 1.2.3 半球型Ⅲ摄像机 ............................................................................................. 10 1.2.4 半球型IV摄像机 ........................................................................................... 11 1.2.5 半球型V摄像机 ............................................................................................ 13 1.3 筒型摄像机接口介绍 ................................................................................................. 15 1.3.1 筒型Ⅰ摄像机 ................................................................................................. 15 1.3.2 筒型Ⅱ摄像机 ................................................................................................. 16 1.3.3 筒型Ⅲ摄像机 ................................................................................................. 18 1.3.4 筒型IV摄像机............................................................................................... 19 1.3.5 筒型V摄像机 ................................................................................................ 20 1.4 卡片型摄像机接口介绍 ............................................................................................. 21 1.4.1卡片型Ⅰ摄像机 .................................................................................................... 21 1.4.2卡片型Ⅱ摄像机 .................................................................................................... 22 1.5 迷你半球型摄像机接口介绍 ..................................................................................... 24 1.6 海螺型摄像机接口介绍 ............................................................................................. 25 2 搜索和修改IP地址 ............................................................................................................... 26 3 快速访问 ................................................................................................................................. 28

海康威视网口工业面阵相机用户手册v1

海康威视网口工业面阵相机用户手册v1

网口工业面阵相机

用户手册

UD00233B

网口工业面阵相机  用户手册

i版权所有©杭州海康威视数字技术股份有限公司2016。保留一切权利。 本手册的任何部分，包括文字、图片、图形等均归属于杭州海康威视数字技术股份有限公司或其子公司（以下简称“本公司”或“海康威视”）。未经书面许可，任何单位和个人不得以任何方式摘录、复制、翻译、修改本手册的全部或部分。除非另有约定，本公司不对本手册提供任何明示或默示的声明或保证。 关于本手册 本手册描述的产品仅供中国大陆地区销售和使用。 本手册作为指导使用。手册中所提供照片、图形、图表和插图等，仅用于解释和说明目的，与具体产品可能存在差异，请以实物为准。因产品版本升级或其他需要，本公司可能对本手册进行更新，如您需要最新版手册，请您登录公司官网查阅（）。 海康威视建议您在专业人员的指导下使用本手册。 商标声明 为海康威视的注册商标。本手册涉及的其他商标由其所有人各自拥有。 责任声明  在法律允许的最大范围内，本手册所描述的产品（含其硬件、软件、固件等）均“按照现状”提供，可能存在瑕疵、错误或故障，本公司不提供任何形式的明示或默示保证，包括但不限于适销性、质量满意度、适合特定目的、不侵犯第三方权利等保证；亦不对使用本手册或使用本公司产品导致的任何特殊、附带、偶然或间接的损害进行赔偿，包括但不限于商业利润损失、数据或文档丢失产生的损失。  若您将产品接入互联网需自担风险，包括但不限于产品可能遭受网络攻击、黑客攻击、病毒感染等，本公司不对因此造成的产品工作异常、信息泄露等问题承担责任，但本公司将及时为您提供产品相关技术支持。 

使用本产品时，请您严格遵循适用的法律。若本产品被用于侵犯第三方权利或其他不当用途，本公司概不承担任何责任。  如本手册内容与适用的法律相冲突，则以法律规定为准。 网口工业面阵相机  用户手册

海康威视产品使用和管理指南说明书

海康威视产品使用和管理指南说明书

©2022HangzhouHikvisionDigitalTechnologyCo.,Ltd.Allrightsreserved.AboutthisManualTheManualincludesinstructionsforusingandmanagingtheProduct.Pictures,charts,imagesandallotherinformationhereinafterarefordescriptionandexplanationonly.TheinformationcontainedintheManualissubjecttochange,withoutnotice,duetofirmwareupdatesorotherreasons.PleasefindthelatestversionofthisManualattheHikvisionwebsite(https:///).PleaseusethisManualwiththeguidanceandassistanceofprofessionalstrainedinsupportingtheProduct.andotherHikvision'strademarksandlogosarethepropertiesofHikvisioninvariousjurisdictions.Othertrademarksandlogosmentionedarethepropertiesoftheirrespectiveowners.DisclaimerTOTHEMAXIMUMEXTENTPERMITTEDBYAPPLICABLELAW,THISMANUALANDTHEPRODUCTDESCRIBED,WITHITSHARDWARE,SOFTWAREANDFIRMWARE,AREPROVIDED“ASIS”AND“WITHALLFAULTSANDERRORS”.HIKVISIONMAKESNOWARRANTIES,EXPRESSORIMPLIED,INCLUDINGWITHOUTLIMITATION,MERCHANTABILITY,SATISFACTORYQUALITY,ORFITNESSFORAPARTICULARPURPOSE.THEUSEOFTHEPRODUCTBYYOUISATYOUROWNRISK.INNOEVENTWILLHIKVISIONBELIABLETOYOUFORANYSPECIAL,CONSEQUENTIAL,INCIDENTAL,ORINDIRECTDAMAGES,INCLUDING,AMONGOTHERS,DAMAGESFORLOSSOFBUSINESSPROFITS,BUSINESSINTERRUPTION,ORLOSSOFDATA,CORRUPTIONOFSYSTEMS,ORLOSSOFDOCUMENTATION,WHETHERBASEDONBREACHOFCONTRACT,TORT(INCLUDINGNEGLIGENCE),PRODUCTLIABILITY,OROTHERWISE,INCONNECTIONWITHTHEUSEOFTHEPRODUCT,EVENIFHIKVISIONHASBEENADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGESORLOSS.YOUACKNOWLEDGETHATTHENATUREOFINTERNETPROVIDESFORINHERENTSECURITYRISKS,ANDHIKVISIONSHALLNOTTAKEANYRESPONSIBILITIESFORABNORMALOPERATION,PRIVACYLEAKAGEOROTHERDAMAGESRESULTINGFROMCYBER-ATTACK,HACKERATTACK,VIRUSINSPECTION,OROTHERINTERNETSECURITYRISKS;HOWEVER,HIKVISIONWILLPROVIDETIMELYTECHNICALSUPPORTIFREQUIRED.YOUAGREETOUSETHISPRODUCTINCOMPLIANCEWITHALLAPPLICABLELAWS,ANDYOUARESOLELYRESPONSIBLEFORENSURINGTHATYOURUSECONFORMSTOTHEAPPLICABLELAW.ESPECIALLY,YOUARERESPONSIBLE,FORUSINGTHISPRODUCTINAMANNERTHATDOESNOTINFRINGEONTHERIGHTSOFTHIRDPARTIES,INCLUDINGWITHOUTLIMITATION,RIGHTSOFPUBLICITY,INTELLECTUALPROPERTYRIGHTS,ORDATAPROTECTIONANDOTHERPRIVACYRIGHTS.YOUSHALLNOTUSETHISPRODUCTFORANYPROHIBITEDEND-USES,INCLUDINGTHEDEVELOPMENTORPRODUCTIONOFWEAPONSOFMASSDESTRUCTION,THEDEVELOPMENTORPRODUCTIONOFCHEMICALORBIOLOGICALWEAPONS,ANYACTIVITIESINTHECONTEXTRELATEDTOANYNUCLEAREXPLOSIVEORUNSAFENUCLEARFUEL-CYCLE,ORINSUPPORTOFHUMANRIGHTSABUSES.INTHEEVENTOFANYCONFLICTSBETWEENTHISMANUALANDTHEAPPLICABLELAW,THELATERPREVAILS.

海康威视HIKVISION网络摄像头安装说明书

海康威视HIKVISION网络摄像头安装说明书

HlKVISlON

网络摄像机

快速指南

102009530 UD.6L0101B1638A011

版权所有©杭州海康威视数字技术股份有限公司2015。保留一切权利。

本手册的任何部分，包括文字、图片、图形等均归属于杭州海康威视数字技术股份有限公 司或其子公司(以下简称“本公司”或“海康威视”)。未经书面许可，任何单位和个人 不得以任何方式摘录、复制、翻译、修改本手册的全部或部分。除非另有约定，本公司不 对本手册提供任何明示或默示的声明或保证。

关于本手册

本手册描述的产品仅供中国大陆地区销售和使用。

本手册作为指导使用。手册中所提供照片、图形、图表和插图等，仅用于解释和说明目的， 与具体产品可能存在差异，请以实物为准。因产品版本升级或其他需要，本公司可能对本 手册进行更新，如您需要最新版手册，请您登录公司官网查阅() O 海康威视建议您在专业人员的指导下使用本手册。

访问本公亘官网(www.hikvision.coni)获取说明书、应用工具和开发资料。

商标声明

:esraυtt≡ "/KW57O/V为海康威视的注册商标。本手册涉及的其他商标由其所有人各自 拥有。

责任声明

•在法律允许的最大范围内，本手册所描述的产品(含其硬件、软件、固件等)均“按照 现状”提供，可能存在瑕疵、错误或故障，本公司不提供任何形式的明示或默示保证， 包括但不限于适销性、质塑满意度、适合特定目的、不侵犯第三方权利等保证；亦不对 使用本手册或使用本公司产品导致的任何特殊、附带、偶然或间接的损害进行赔偿，包 括但不限于商业利润损失、数据或文档丢失产生的损失。

•若您将产品接入互联网需自担风险，包括但不限于产品可能遭受网络攻击、黑客攻击、 病毒感染等，本公司不对因此造成的产品工作异常、信息泄露等问题承担责任，但本公 司将及时为您提供产品相关技术支持。

•使用本产品时，请您严格遵循适用的法律。若本产品被用于侵犯第三方权利或其他不当 用途，本公司概不承担任何责任。